| Age | Commit message (Collapse) | Author |
|---|
|
Now that the registering of the /dev/* video / subdev nodes has been
moved to the end of atomisp_pci_probe() the workaround with the loading
mutex to delay opens until init is done is no longer necessary.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Register /dev/* nodes at the end of atomisp_pci_probe(), this is
a prerequisite for dropping the loading mutex + ready flag kludge
for delaying open() calls on the /dev/* nodes .
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Split subdev and video-node registration into 2 steps, this is
a preparation step for moving video-node registration to the
end of probe() so that the loading() mutex can be removed.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_css_set_cont_prev_start_time() is a no-op, remove it.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove some more code which is no longer referenced after the removal
of the ATOMISP_ACC_* custom ioctls.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ACC /dev/video# device node uses a struct video_device embedded in
an atomisp_acc_pipe struct instead of in an atomisp_video_pipe struct.
Yet it uses the same file-ops and ioctl-ops even though it does not have
a videobuf queue, which makes e.g. the mmap fop nonsense.
Worse the only file-ops / ioctls which differentiate between
the 2 types and correctly do container_of on the right type
are the open/release fops and the vidioc_default handler.
The mmap and poll fops and *all* other ioctl handlers unconditionally
do container_of on the passed in struct video_device blindly assuming
they are dealing with the one embedded in the atomisp_video_pipe struct.
This makes it trivial for userspace to cause all sort of undefined behavior
by calling mmap, poll or the other ioctls on the ACC device node!
Presumably the use of the ACC device node was to allow making the special
ioctls to load custom programs while the other /dev/video# nodes were
already open, since the /dev/video# nodes can currently all be opened
only once (which needs to be fixed).
commit 4bbca788b6eb ("media: atomisp: remove private acceleration ioctls")
has removed the custom ATOMISP_ACC_* ioctls, so there no longer is any
reason to keep the ACC device node.
As explained above its presence can easily cause the kernel to crash,
so remove the ACC device node and the code for handling it.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After the file-injection support removal the file_input flag is
always false.
Remove the flag and replace any code checking it with the code-path
for when it is false.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After the file-injection support removal the outq videobuf queue is
no longer used, remove it.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After the file-injection support removal, atomisp_video_pipe->type never
is V4L2_BUF_TYPE_VIDEO_OUTPUT anymore, so the V4L2_BUF_TYPE_VIDEO_OUTPUT
support path in atomisp_video_init() is never hit and this path is
the only user of atomisp_file_fops and atomisp_file_ioctl_ops.
Remove atomisp_file_fops and atomisp_file_ioctl_ops and all of
the functions which are only referenced by these ops structs.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The file-injection support of the atomisp driver has not been tested
and is not necessary for camera support, remove it.
Note the main reason for removing this is because it depends on
the videobuf (version 1) outq and we want to remove or replace
all videobuf usage in the driver.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_subdev_register_entities() had V4L2_CAP_VIDEO_CAPTURE /
V4L2_CAP_VIDEO_OUT swapped. Or-ing in V4L2_CAP_VIDEO_OUT for
the nodes which allow capturing from the camera and or-ing in
V4L2_CAP_VIDEO_CAPTURE for the file-injection node
(mem2mem use of the ISP).
Things happen to still work for the capture device-nodes because
the "shared" caps also included V4L2_CAP_VIDEO_CAPTURE, so those
shared nodes advertised V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUT.
Fix things so that only the correct caps are advertised.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The atomisp code needs USERPTR pointers to be page aligned,
otherwise bad things (scribbling over other parts of the
process' RAM) happen.
Add a check to ensure this and exit VIDIOC_QBUF calls with
unaligned pointers with -EINVAL.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
alloc_user_pages() is only ever called on qbuf for USERPTR buffers which
always hits the get_user_pages_fast() path, so the pin_user_pages() path
can be removed.
Getting the vma then also is no longer necessary since that is only
done to determine which path to use.
And this also removes the only users of the mem_type struct hmm_bo member,
so remove that as well.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
helper funcs
Rewrite free_private_pages() using pages_array helper funcs.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
helper funcs
Rewrite alloc_private_pages() using pages_array helper funcs.
Note alloc_pages_bulk_array() skips non NULL pages, so switch
the allocating of the pages pointer array to kcalloc to ensure
the pages are initially all set to NULL.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Further simplify alloc_private_pages().
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Since lack_mem starts initialized to true, alloc_private_pages() will
always set order to HMM_MIN_ORDER aka 0 / will always alloc 1 page at
a time.
So all the magic to decrease order if allocs fail is not necessary
and can be removed.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_try_fmt() gives results with padding included. So when userspace
asks for e.g. 1600x1200 then we should pass 1616x1216 to atomisp_try_fmt()
this will then get adjusted back to 1600x1200 before returning it to
userspace by the atomisp_adjust_fmt() call at the end of atomisp_try_fmt().
This fixes the resolution list in camorama showing resolutions like e.g.
1584x1184 instead of 1600x1200.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_try_fmt() calls the sensor's try_fmt handler but it does
not copy the result back to the passed in v4l2_pix_format under
some circumstances.
Potentially returning an unsupported resolution to userspace,
which VIDIOC_TRY_FMT is not supposed to do.
atomisp_set_fmt() also uses atomisp_try_fmt() and relies
on this wrong behavior. The VIDIOC_TRY_FMT call passes NULL for
the res_overflow argument where as the atomisp_set_fmt() call
passes non NULL.
Use the res_overflow argument to differentiate between the 2 callers
and always propagate the sensors result in the VIDIOC_TRY_FMT case.
This fixes the resolution list in camorama showing resolutions like e.g.
1584x1184 instead of 1600x1200.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add info about sensors v4l2_get_subdev_hostdata() use, to notes.txt.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Exit with an error on any i2c-write errors, rather then only
exiting with an error when ov2680_get_intg_factor() fails.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
On ov2680_set_fmt() calls with format->which == V4L2_SUBDEV_FORMAT_TRY,
ov2680_set_fmt() does not talk to the sensor, so there is no need to
lock the dev->input_lock mutex in this case.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
On sets actually store the set (closest) format inside ov2680_device.dev,
so that it also properly gets returned by get_fmt.
This fixes the following problem:
1. App does an VIDIOC_SET_FMT 640x480, calling ov2680_set_fmt()
2. Internal buffers (atomisp_create_pipes_stream()) get allocated
at 640x480 size by atomisp_set_fmt()
3. ov2680_get_fmt() gets called later on and returns 1600x1200
since ov2680_device.dev was not updated. So things get configured
to stream at 1600x1200, but the internal buffers created during
atomisp_create_pipes_stream() do not get updated in size
4. streaming starts, internal buffers overflow and the entire
machine freezes eventually due to memory being corrupted
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The acpi_evaluate_dsm_typed() provides a way to check the type of the
object evaluated by _DSM call. Use it instead of open coded variant.
Link: https://lore.kernel.org/r/20220730155905.90091-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert the Samsung Exynos SoC G-Scaler bindings to DT schema.
Changes done during conversion:
1. A typical (already used) properties like clocks, iommus and
power-domains.
2. Require clocks, because they are essential for the block to operate.
3. Describe the differences in clocks between the Exynos5250/5420 and
the Exynos5433 G-Scalers. This includes the fifth Exynos5433 clock
"gsd" (GSCL Smart Deck) which was added to the DTS, but not to the
bindings and Linux driver. Similarly to Exynos5433 DECON change [1],
the clock should be used.
[1] https://lore.kernel.org/all/6270db2d-667d-8d6f-9289-be92da486c25@samsung.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert Dongwoon Anatech DW9714 camera voice coil lens driver to DT
schema and extend the bindings with vcc-supply (already used by driver)
and powerdown-gpios (based on datasheet, not used by the driver).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that the pipeline is stored into pads instead of entities, we can
change the relevant functions to take pads instead of entities.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a new media entity operation, has_pad_interdep. The optional op is
used to discover the pad interdependencies inside an entity during the
pipeline construction.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
[Note: the code is mostly from Laurent but the patch description is from Tomi]
The media_pipeline_start() and media_pipeline_stop() functions use the
media graph walk API to traverse the graph and validate the pipeline.
The graph walk traverses the media graph following links between the
entities.
Also, while the pipeline can't change between the start and stop calls,
the graph is walked again from scratch at stop time, or any time a
driver needs to inspect the pipeline.
With the upcoming multiplexed streams support we will need a bit more
intelligent pipeline construction, as e.g. two independent streams may
be passing through a single entity via separate pads in which case
those pads should not be part of the same pipeline.
This patch essentially rewrites the media_pipeline_start/stop so that
a pipeline is defined as a set of pads instead of entities and the media
graph traversal considers the pad interdependencies when choosing which
links to follow.
Currently all the entity's pads are considered as interdependent. This
means that the behavior with all the current drivers stays the same, but
in the future we can define a more fine-grained pipeline construction.
Additionally the media pipeline's pads are cached at
media_pipeline_start() time, and re-used at media_pipeline_stop() which
avoid the need to re-walk the whole graph as the previous implementation
did.
Also, caching pads in the pipeline can serve in the future as the
foundation to provide a better API than the media graph walk to drivers
to iterate over pads and entities in the pipeline.
Note that the old media_pipeline_start/stop used the media graph walk
API. The new version does not use the media graph walk API, but instead
a new implementation.
There are two reasons for not changing the graph walk: it proved to be
rather difficult to change the graph walk to have the features
implemented in this patch, and second, this keeps the backward
compatibility of the graph walk as there are users of the graph walk API
The long term plan is that all the existing code would be converted to
use the new cached pipeline, thus allowing us to remove the graph walk.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use video_device_pipeline_alloc_start() instead of manually
allocating/managing the media pipeline storage.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add new variant of media_pipeline_start(), media_pipeline_alloc_start().
media_pipeline_alloc_start() can be used by drivers that do not need to
extend the media_pipeline. The function will either use the pipeline
already associated with the entity, if such exists, or allocate a new
pipeline.
When media_pipeline_stop() is called and the pipeline's use count drops
to zero, the pipeline is automatically freed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use video_device_pipeline() in the drivers instead of
media_entity_pipeline().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert the media drivers to use video device based pipeline start/stop
where possible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
With the upcoming stream related improvements to the pipelines, the
pipelines are moved from media entities to media pads. As the drivers
currently use the pipelines with the entity based model, moving the
pipelines to pads will cause changes to the drivers.
However, most of the uses of media pipelines are related to a video
device (a DMA engine) with a single pad, and thus there's never a need
to support multiple pads in these use cases. We can avoid pushing the
complexities of the pad based model to the drivers by adding video
device wrappers for the pipeline related functions.
This patch adds a number of wrappers to media_pipeline functions, all of
which take a video_device as a parameter (instead of a media_entity),
and verify that there's just one pad.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Replace direct access to the pipe field in drivers with a new helper
function. This will allow easier refactoring of media pipeline handling
in the MC core behind the scenes without affecting drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The media_entity_get_fwnode_pad() function is unrelated to the graph
traversal code that it is currently bundled with. Move it with the
media_entity_remote_pad() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The media_entity_enum_init() function is a wrapper around
__media_entity_enum_init() that turns a media_device pointer argument
into the maximum entity ID in the corresponding media graph.
__media_entity_enum_init() is never used outside of
media_entity_enum_init(), so the two functions can be merged together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add an iterator helper to easily cycle through all pads in an entity and
use it in media-entity and media-device code where appropriate.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
'streaming_count' is a bit misleading name, as the count is increased
with media_pipeline_start(). Let's rename it to 'start_count' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4L2_FRAME_DESC_ENTRY_MAX is currently set to 4. In theory it's possible
to have an arbitrary amount of streams in a single pad, so preferably
there should be no hardcoded maximum number.
However, I believe a reasonable max is 8, which would cover a CSI-2 pad
with 4 streams of pixel data and 4 streams of metadata.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
./include/media/media-entity.h:595:34: error: implicit declaration of function ‘min’
Include minmax.h to get the definition for min().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The doc talks about streams and pipelines, but doesn't really define
them. This is an attempt to define them according to my understanding.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
struct v4l2_fwnode_endpoint was zeroed previously apart from the endpoint
information itself when the endpoint properties were parsed. Now this
hasn't been the case for a few years so remove the comment.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
PHY_SUN6I_MIPI_DPHY is not a freely selectable option and so may not
always be available. Depend on it instead.
Fixes: 94d7fd9692b5 ("media: sunxi: Depend on GENERIC_PHY_MIPI_DPHY")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The commit in Fixes also introduced some new error handling which should
goto the existing error handling path.
Otherwise some resources leak.
Fixes: 73dcffeb2ff9 ("media: i2c: Support 19.2MHz input clock in ov8865")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The return value from register writes is ignored apart from the last
value. Fix this.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The state argument for the functions for obtaining various parts of the
state is NULL if it is called by drivers for active state. Fail graciously
in that case instead of dereferencing a NULL pointer.
Suggested-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
What the IMGU driver did was that it first acquired the pointers to active
and try V4L2 subdev state, and only then figured out which one to use.
The problem with that approach and a later patch (see Fixes: tag) is that
as sd_state argument to v4l2_subdev_get_try_crop() et al is NULL, there is
now an attempt to dereference that.
Fix this.
Also rewrap lines a little.
Fixes: 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
ret in ar0521_set_fmt is never set to values other than 0. Replace it with
plain 0.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Return error code if ar0521_write_regs() fails in ar0521_power_on().
Fixes: 852b50aeed15 ("media: On Semi AR0521 sensor driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
