| Age | Commit message (Collapse) | Author |
|---|
|
'kfree_rcu.2020.01.24a', 'list.2020.01.10a', 'preempt.2020.01.24a' and 'torture.2019.12.09a' into HEAD
doc.2019.12.10a: Documentations updates
exp.2019.12.09a: Expedited grace-period updates
fixes.2020.01.24a: Miscellaneous fixes
kfree_rcu.2020.01.24a: Batch kfree_rcu() work
list.2020.01.10a: RCU-protected-list updates
preempt.2020.01.24a: Preemptible RCU updates
torture.2019.12.09a: Torture-test updates
|
|
Now that the kfree_rcu() special-casing has been removed from tree RCU,
this commit removes kfree_call_rcu_nobatch() since it is no longer needed.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit removes kfree_rcu() special-casing and the lazy-callback
handling from Tree RCU. It moves some of this special casing to Tiny RCU,
the removal of which will be the subject of later commits.
This results in a nice negative delta.
Suggested-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Add slab.h #include, thanks to kbuild test robot <lkp@intel.com>. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This test runs kfree_rcu() in a loop to measure performance of the new
kfree_rcu() batching functionality.
The following table shows results when booting with arguments:
rcuperf.kfree_loops=20000 rcuperf.kfree_alloc_num=8000
rcuperf.kfree_rcu_test=1 rcuperf.kfree_no_batch=X
rcuperf.kfree_no_batch=X # Grace Periods Test Duration (s)
X=1 (old behavior) 9133 11.5
X=0 (new behavior) 1732 12.5
On a 16 CPU system with the above boot parameters, we see that the total
number of grace periods that elapse during the test drops from 9133 when
not batching to 1732 when batching (a 5X improvement). The kfree_rcu()
flood itself slows down a bit when batching, though, as shown.
Note that the active memory consumption during the kfree_rcu() flood
does increase to around 200-250MB due to the batching (from around 50MB
without batching). However, this memory consumption is relatively
constant. In other words, the system is able to keep up with the
kfree_rcu() load. The memory consumption comes down considerably if
KFREE_DRAIN_JIFFIES is increased from HZ/50 to HZ/80. A later patch will
reduce memory consumption further by using multiple lists.
Also, when running the test, please disable CONFIG_DEBUG_PREEMPT and
CONFIG_PROVE_RCU for realistic comparisons with/without batching.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The description below is already in use for rk3308.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"
for mmc nodes on a rk3308 platform to rockchip-dw-mshc.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116152230.29831-3-jbx6244@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Current dts files with 'dwmmc' nodes are manually verified.
In order to automate this process rockchip-dw-mshc.txt
has to be converted to yaml. In the new setup
rockchip-dw-mshc.yaml will inherit properties from
mmc-controller.yaml and synopsys-dw-mshc-common.yaml.
'dwmmc' will no longer be a valid name for a node and
should be changed to 'mmc'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116152230.29831-2-jbx6244@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Current dts files with 'dwmmc' nodes are manually verified.
In order to automate this process synopsys-dw-mshc.txt
has to be converted to yaml. In the new setup
synopsys-dw-mshc.yaml will inherit properties from
mmc-controller.yaml and synopsys-dw-mshc-common.yaml.
'dwmmc' will no longer be a valid name for a node and
should be changed to 'mmc'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116152230.29831-1-jbx6244@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the sysfs ABI information for idxd driver in
Documentation/ABI/stable directory.
Signed-off-by: Jing Lin <jing.lin@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/157965025170.73301.13428570530450446901.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Documentation for ADM1177 was added.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200114112159.25998-2-beniamin.bia@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
driver
ADM1177 is a Hot Swap Controller and Digital Power Monitor with
Soft Start Pin.
Datasheet:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Link: https://lore.kernel.org/r/20200114112159.25998-1-beniamin.bia@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add documentation for 'xdpe122' devices.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Link: https://lore.kernel.org/r/20200113150841.17670-7-vadimp@mellanox.com
[groeck: Added to index.rst]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Reading the temperature of ATA drives has been supported for years
by userspace tools such as smarttools or hddtemp. The downside of
such tools is that they need to run with super-user privilege, that
the temperatures are not reported by standard tools such as 'sensors'
or 'libsensors', and that drive temperatures are not available for use
in the kernel's thermal subsystem.
This driver solves this problem by adding support for reading the
temperature of ATA drives from the kernel using the hwmon API and
by adding a temperature zone for each drive.
With this driver, the hard disk temperature can be read using the
unprivileged 'sensors' application:
$ sensors drivetemp-scsi-1-0
drivetemp-scsi-1-0
Adapter: SCSI adapter
temp1: +23.0°C
or directly from sysfs:
$ grep . /sys/class/hwmon/hwmon9/{name,temp1_input}
/sys/class/hwmon/hwmon9/name:drivetemp
/sys/class/hwmon/hwmon9/temp1_input:23000
If the drive supports SCT transport and reports temperature limits,
those are reported as well.
drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1: +27.0°C (low = +0.0°C, high = +60.0°C)
(crit low = -41.0°C, crit = +85.0°C)
(lowest = +23.0°C, highest = +34.0°C)
The driver attempts to use SCT Command Transport to read the drive
temperature. If the SCT Command Transport feature set is not available,
or if it does not report the drive temperature, drive temperatures may
be readable through SMART attributes. Since SMART attributes are not well
defined, this method is only used as fallback mechanism.
Cc: Chris Healy <cphealy@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for Maxim MAX20730, MAX20734, MAX20743 Integrated,
Step-Down Switching Regulators with PMBus support.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
MAX20796 is a dual-phase scalable integrated voltage regulator with
PMBus interface.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
MAX31730 is a 3-Channel Remote Temperature Sensor.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the UCD90320 chip and its expanded set of GPIO pins.
Signed-off-by: Jim Wright <wrightj@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20191205232411.21492-3-wrightj@linux.vnet.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document the UCD90320 device tree binding.
Signed-off-by: Jim Wright <wrightj@linux.vnet.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191205232411.21492-2-wrightj@linux.vnet.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add an entry for erratum A011043: the MDIO_CFG[MDIO_RD_ER]
bit may be falsely set when reading internal PCS registers.
MDIO reads to internal PCS registers may result in having
the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
error and read data (MDIO_DATA[MDIO_DATA]) is correct.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull XArray fixes from Matthew Wilcox:
"Primarily bugfixes, mostly around handling index wrap-around
correctly.
A couple of doc fixes and adding missing APIs.
I had an oops live on stage at linux.conf.au this year, and it turned
out to be a bug in xas_find() which I can't prove isn't triggerable in
the current codebase. Then in looking for the bug, I spotted two more
bugs.
The bots have had a few days to chew on this with no problems
reported, and it passes the test-suite (which now has more tests to
make sure these problems don't come back)"
* tag 'xarray-5.5' of git://git.infradead.org/users/willy/linux-dax:
XArray: Add xa_for_each_range
XArray: Fix xas_find returning too many entries
XArray: Fix xa_find_after with multi-index entries
XArray: Fix infinite loop with entry at ULONG_MAX
XArray: Add wrappers for nested spinlocks
XArray: Improve documentation of search marks
XArray: Fix xas_pause at ULONG_MAX
|
|
|
|
|
|
|
|
|
|
Add NPCM Peripheral SPI reset binding documentation,
Removing unnecessary aliases use.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200115162301.235926-4-tmaimon77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is initial amplifier driver for rt1015.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200115112519.22050-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge changes updating the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it and adding
ACPI support to the intel_idle driver based on that.
* intel_idle+acpi:
Documentation: admin-guide: PM: Add intel_idle document
intel_idle: Use ACPI _CST on server systems
intel_idle: Add module parameter to prevent ACPI _CST from being used
intel_idle: Allow ACPI _CST to be used for selected known processors
cpuidle: Allow idle states to be disabled by default
intel_idle: Use ACPI _CST for processor models without C-state tables
intel_idle: Refactor intel_idle_cpuidle_driver_init()
ACPI: processor: Export acpi_processor_evaluate_cst()
ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSOR
ACPI: processor: Clean up acpi_processor_evaluate_cst()
ACPI: processor: Introduce acpi_processor_evaluate_cst()
ACPI: processor: Export function to claim _CST control
|
|
When an encrypted directory is listed without the key, the filesystem
must show "no-key names" that uniquely identify directory entries, are
at most 255 (NAME_MAX) bytes long, and don't contain '/' or '\0'.
Currently, for short names the no-key name is the base64 encoding of the
ciphertext filename, while for long names it's the base64 encoding of
the ciphertext filename's dirhash and second-to-last 16-byte block.
This format has the following problems:
- Since it doesn't always include the dirhash, it's incompatible with
directories that will use a secret-keyed dirhash over the plaintext
filenames. In this case, the dirhash won't be computable from the
ciphertext name without the key, so it instead must be retrieved from
the directory entry and always included in the no-key name.
Casefolded encrypted directories will use this type of dirhash.
- It's ambiguous: it's possible to craft two filenames that map to the
same no-key name, since the method used to abbreviate long filenames
doesn't use a proper cryptographic hash function.
Solve both these problems by switching to a new no-key name format that
is the base64 encoding of a variable-length structure that contains the
dirhash, up to 149 bytes of the ciphertext filename, and (if any bytes
remain) the SHA-256 of the remaining bytes of the ciphertext filename.
This ensures that each no-key name contains everything needed to find
the directory entry again, contains only legal characters, doesn't
exceed NAME_MAX, is unambiguous unless there's a SHA-256 collision, and
that we only take the performance hit of SHA-256 on very long filenames.
Note: this change does *not* address the existing issue where users can
modify the 'dirhash' part of a no-key name and the filesystem may still
accept the name.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved comments and commit message, fixed checking return value
of base64_decode(), check for SHA-256 error, continue to set disk_name
for short names to keep matching simpler, and many other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Now that there's sometimes a second type of per-file key (the dirhash
key), clarify some function names, macros, and documentation that
specifically deal with per-file *encryption* keys.
Link: https://lore.kernel.org/r/20200120223201.241390-4-ebiggers@kernel.org
Reviewed-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
When we allow indexed directories to use both encryption and
casefolding, for the dirhash we can't just hash the ciphertext filenames
that are stored on-disk (as is done currently) because the dirhash must
be case insensitive, but the stored names are case-preserving. Nor can
we hash the plaintext names with an unkeyed hash (or a hash keyed with a
value stored on-disk like ext4's s_hash_seed), since that would leak
information about the names that encryption is meant to protect.
Instead, if we can accept a dirhash that's only computable when the
fscrypt key is available, we can hash the plaintext names with a keyed
hash using a secret key derived from the directory's fscrypt master key.
We'll use SipHash-2-4 for this purpose.
Prepare for this by deriving a SipHash key for each casefolded encrypted
directory. Make sure to handle deriving the key not only when setting
up the directory's fscrypt_info, but also in the case where the casefold
flag is enabled after the fscrypt_info was already set up. (We could
just always derive the key regardless of casefolding, but that would
introduce unnecessary overhead for people not using casefolding.)
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, squashed with change
that avoids unnecessarily deriving the key, and many other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Casefolded encrypted directories will use a new dirhash method that
requires a secret key. If the directory uses a v2 encryption policy,
it's easy to derive this key from the master key using HKDF. However,
v1 encryption policies don't provide a way to derive additional keys.
Therefore, don't allow casefolding on directories that use a v1 policy.
Specifically, make it so that trying to enable casefolding on a
directory that has a v1 policy fails, trying to set a v1 policy on a
casefolded directory fails, and trying to open a casefolded directory
that has a v1 policy (if one somehow exists on-disk) fails.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, and other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The affinity of managed interrupts is completely handled in the kernel and
cannot be changed via the /proc/irq/* interfaces from user space. As the
kernel tries to spread out interrupts evenly accross CPUs on x86 to prevent
vector exhaustion, it can happen that a managed interrupt whose affinity
mask contains both isolated and housekeeping CPUs is routed to an isolated
CPU. As a consequence IO submitted on a housekeeping CPU causes interrupts
on the isolated CPU.
Add a new sub-parameter 'managed_irq' for 'isolcpus' and the corresponding
logic in the interrupt affinity selection code.
The subparameter indicates to the interrupt affinity selection logic that
it should try to avoid the above scenario.
This isolation is best effort and only effective if the automatically
assigned interrupt mask of a device queue contains isolated and
housekeeping CPUs. If housekeeping CPUs are online then such interrupts are
directed to the housekeeping CPU so that IO submitted on the housekeeping
CPU cannot disturb the isolated CPU.
If a queue's affinity mask contains only isolated CPUs then this parameter
has no effect on the interrupt routing decision, though interrupts are only
happening when tasks running on those isolated CPUs submit IO. IO submitted
on housekeeping CPUs has no influence on those queues.
If the affinity mask contains both housekeeping and isolated CPUs, but none
of the contained housekeeping CPUs is online, then the interrupt is also
routed to an isolated CPU. Interrupts are only delivered when one of the
isolated CPUs in the affinity mask submits IO. If one of the contained
housekeeping CPUs comes online, the CPU hotplug logic migrates the
interrupt automatically back to the upcoming housekeeping CPU. Depending on
the type of interrupt controller, this can require that at least one
interrupt is delivered to the isolated CPU in order to complete the
migration.
[ tglx: Removed unused parameter, added and edited comments/documentation
and rephrased the changelog so it contains more details. ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200120091625.17912-1-ming.lei@redhat.com
|
|
* for-next/rng: (2 commits)
arm64: Use v8.5-RNG entropy for KASLR seed
...
|
|
* for-next/errata: (3 commits)
arm64: Workaround for Cortex-A55 erratum 1530923
...
|
|
Expose the ID_AA64ISAR0.RNDR field to userspace, as the RNG system
registers are always available at EL0.
Implement arch_get_random_seed_long using RNDR. Given that the
TRNG is likely to be a shared resource between cores, and VMs,
do not explicitly force re-seeding with RNDRRS. In order to avoid
code complexity and potential issues with hetrogenous systems only
provide values after cpufeature has finalized the system capabilities.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[Modified to only function after cpufeature has finalized the system
capabilities and move all the code into the header -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
[will: Advertise HWCAP via /proc/cpuinfo]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Easily determining what TCG version a tpm device implements
has been a pain point for userspace for a long time, so
add a sysfs file to report the TCG major version of a tpm device.
Also add an entry to Documentation/ABI/stable/sysfs-class-tpm
describing the new file.
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
All of the entries in Documentation/ABI/stable/sysfs-class-tpm
point to the old tpmdd-devel mailing list. This patch
updates the entries to point to linux-intergrity.
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
The rt5645 and rt5650 have two suppliers, document them.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200114150151.8537-1-matthias.bgg@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add imx8mm/imx8mn/imx8mp sdma support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1578893602-14395-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
New binding document for
Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P).
UDMA-P is introduced as part of the K3 architecture and can be found in
AM654 and j721e.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20191223110458.30766-10-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update the provider and client documentation with details about the
metadata support.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20191223110458.30766-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This is for dependency of new TI ringacc dmaengine drivers
Merge tag 'drivers_soc_for_5.6' into topic/ti
SOC: TI Keystone Ring Accelerator driver
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x SoCs.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
multiplexer
This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer
for i.MX8 family SoCs.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200117060653.27485-2-qiangqing.zhang@nxp.com
|
|
Update dt-binding document for GPIO interrupt controller of Meson-A1 SoCs
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191216123645.10099-2-qianggui.song@amlogic.com
|
|
Document the Aspeed SCU interrupt controller and add an include file
for the interrupts it provides.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/1579123790-6894-2-git-send-email-eajames@linux.ibm.com
|
|
Add 7216b0 with supports CQE, HS400, HS400-ES and SDR104.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20200113210706.11972-2-alcooperx@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add binding for the TI's sdhci-omap controller present in am335x and
am437x devices.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116105154.7685-9-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
sdhci-omap can support both external dma controller via dmaengine
framework as well as ADMA which standard SD host controller
provides. Add binding documentation for these external dma properties.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116105154.7685-2-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add compatible string for imx8mp
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1578893602-14395-2-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
DT json-schema for GPIO controller added.
Signed-off-by: Wesley W. Terpstra <wesley@sifive.com>
[Atish: Compatible string update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1575976274-13487-5-git-send-email-yash.shah@sifive.com
|
|
We carry a quirk in the x86 EFI code to switch back to an older
method of mapping the EFI runtime services memory regions, because
it was deemed risky at the time to implement a new method without
providing a fallback to the old method in case problems arose.
Such problems did arise, but they appear to be limited to SGI UV1
machines, and so these are the only ones for which the fallback gets
enabled automatically (via a DMI quirk). The fallback can be enabled
manually as well, by passing efi=old_map, but there is very little
evidence that suggests that this is something that is being relied
upon in the field.
Given that UV1 support is not enabled by default by the distros
(Ubuntu, Fedora), there is no point in carrying this fallback code
all the time if there are no other users. So let's move it into the
UV support code, and document that efi=old_map now requires this
support code to be enabled.
Note that efi=old_map has been used in the past on other SGI UV
machines to work around kernel regressions in production, so we
keep the option to enable it by hand, but only if the kernel was
built with UV support.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-8-ardb@kernel.org
|
