| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed change that
goes a long way to making things simpler for all of the different
arches
- tty documentation cleanups and movements to their own place in the
documentation tree
- old tty driver cleanups and fixes from Jiri to bring some existing
drivers into the modern world
- RS485 cleanups and unifications to make it easier for individual
drivers to support this mode instead of having to duplicate logic
in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues"
* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
tty: Rework receive flow control char logic
pcmcia: synclink_cs: Don't allow CS5-6
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: uartlite: Fix BRKINT clearing
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
serial: msm_serial: disable interrupts in __msm_console_write()
serial: meson: acquire port->lock in startup()
serial: 8250_dw: Use dev_err_probe()
serial: 8250_dw: Use devm_add_action_or_reset()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"The header cleanup series from Masahiro Yamada ended up causing some
regressions in the ABI because of an ambigous uid_t type.
This was only caught after the original patches got merged, but at
least the fixes are trivial and hopefully complete"
* tag 'asm-generic-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
binder: fix sender_euid type in uapi header
sparc: fix mis-use of __kernel_{uid,gid}_t in uapi/asm/stat.h
powerpc: use __kernel_{uid,gid}32_t in uapi/asm/stat.h
mips: use __kernel_{uid,gid}32_t in uapi/asm/stat.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching cleanup from Petr Mladek:
- Remove duplicated livepatch code [Christophe]
* tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Remove klp_arch_set_pc() and asm/livepatch.h
|
|
Commit 31a088b664d6 ("sparc: add asm/stat.h to UAPI compile-test
coverage") converted as follows:
uid_t --> __kernel_uid_t
gid_t --> __kernel_gid_t
It changed the field widths of struct stat because Sparc uses 16-bits for
___kernel_{uid,gid}_t as in arch/sparc/include/uapi/asm/posix_types.h.
The safe replacements across all architectures are:
uid_t --> __kernel_uid32_t
gid_t --> __kernel_gid32_t
as defined in include/linux/types.h.
A similar issue was reported for the android binder. [1]
[1]: https://lore.kernel.org/all/20220601010017.2639048-1-cmllamas@google.com/
Fixes: 31a088b664d6 ("sparc: add asm/stat.h to UAPI compile-test coverage")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit c01013a2f8dd ("powerpc: add asm/stat.h to UAPI compile-test
coverage") converted as follows:
uid_t --> __kernel_uid_t
gid_t --> __kernel_gid_t
The bit width of __kernel_{uid,gid}_t is 16 or 32-bits depending on
architectures.
PPC uses 32-bits for them as in include/uapi/asm-generic/posix_types.h,
so the previous conversion is probably fine, but let's stick to the
arch-independent conversion just in case.
The safe replacements across all architectures are:
uid_t --> __kernel_uid32_t
gid_t --> __kernel_gid32_t
as defined in include/linux/types.h.
A similar issue was reported for the android binder. [1]
[1]: https://lore.kernel.org/all/20220601010017.2639048-1-cmllamas@google.com/
Fixes: c01013a2f8dd ("powerpc: add asm/stat.h to UAPI compile-test coverage")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit 8c1a381a4fbb ("mips: add asm/stat.h to UAPI compile-test
coverage") converted as follows:
uid_t --> __kernel_uid_t
gid_t --> __kernel_gid_t
The bit width of __kernel_{uid,gid}_t is 16 or 32-bits depending on
architectures.
MIPS uses 32-bits for them as in include/uapi/asm-generic/posix_types.h,
so the previous conversion is probably fine, but let's stick to the
arch-independent conversion just in case.
The safe replacements across all architectures are:
uid_t --> __kernel_uid32_t
gid_t --> __kernel_gid32_t
as defined in include/linux/types.h.
A similar issue was reported for the android binder. [1]
[1]: https://lore.kernel.org/all/20220601010017.2639048-1-cmllamas@google.com/
Fixes: 8c1a381a4fbb ("mips: add asm/stat.h to UAPI compile-test coverage")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Quite a large number of conversions this time around, courtesy of Uwe
who has been working tirelessly on these. No drivers of the legacy API
are left at this point, so as a next step the old API can be removed.
Support is added for a few new devices such as the Xilinx AXI timer-
based PWMs and the PWM IP found on Sunplus SoCs.
Other than that, there's a number of fixes, cleanups and optimizations"
* tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits)
pwm: pwm-cros-ec: Add channel type support
dt-bindings: google,cros-ec-pwm: Add the new -type compatible
dt-bindings: Add mfd/cros_ec definitions
pwm: Document that the pinstate of a disabled PWM isn't reliable
pwm: twl-led: Implement .apply() callback
pwm: lpc18xx: Implement .apply() callback
pwm: mediatek: Implement .apply() callback
pwm: lpc32xx: Implement .apply() callback
pwm: tegra: Implement .apply() callback
pwm: stmpe: Implement .apply() callback
pwm: sti: Implement .apply() callback
pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795
dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC
pwm: tegra: Optimize period calculation
pwm: renesas-tpu: Improve precision of period and duty_cycle calculation
pwm: renesas-tpu: Improve maths to compute register settings
pwm: renesas-tpu: Rename variables to match the usual naming
pwm: renesas-tpu: Implement .apply() callback
pwm: renesas-tpu: Make use of devm functions
pwm: renesas-tpu: Make use of dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
|
|
Pull microblaze updates from Michal Simek:
- Fix issues with freestanding
- Wire memblock_dump_all()
- Add support for memory reservation from DT
* tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: fix typos in comments
microblaze: Add support for reserved memory defined by DT
microblaze: Wire memblock_dump_all()
microblaze: Use simple memmove/memcpy implementation from lib/string.c
microblaze: Do loop unrolling for optimized memset implementation
microblaze: Use simple memset implementation from lib/string.c
|
|
The missing include directory caused a W=1 warning that can be
trivially fixed. I also noticed references in the marvell.rst
documentation that can be removed at the same time.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Without this change arch/riscv/kernel/elf_kexec.c fails to compile once
commit 233c1e6c319c ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") is also contained in the tree.
This currently happens in next-20220527.
Prepare the RISC-V similar to the s390 adaption done in 233c1e6c319c.
This is safe to do on top of the riscv change even without the change to
arch_kexec_apply_relocations.
Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file")
Looks-good-to: liaochang (A) <liaochang1@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"Minor cleanups and code optimizations, e.g.:
- improvements in assembly statements in the tmpalias code path
- added some additionals compile time checks
- drop some unneccesary assembler DMA syncs"
* tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
parisc: Optimize tmpalias function calls
parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
parisc: Fix wrong comment for shr macro
parisc: Prevent ldil() to sign-extend into upper 32 bits
parisc: Don't hardcode assembler bit definitions in tmpalias code
parisc: Don't enforce DMA completion order in cache flushes
parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Kconfig: Fix indentation and add endif comment
MIPS: bmips: Fix compiler warning observed on W=1 build
MIPS: Rewrite `csum_tcpudp_nofold' in plain C
mips: setup: use strscpy to replace strlcpy
MIPS: Octeon: add SNIC10E board
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Octeon: fix typo in comment
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Sibyte: remove unnecessary return variable
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
selftests/ftrace: Save kprobe_events to test log
MIPS: tools: no need to initialise statics to 0
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
MIPS: VR41xx: Drop redundant spinlock initialization
MIPS: smp: optimization for flush_tlb_mm when exiting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A collection of changes to add elf-fdpic loader support for m68k.
Also a collection of various fixes. They include typo corrections,
undefined symbol compilation fixes, removal of the ISA_DMA_API support
and removal of unused code.
Summary:
- correctly set up ZERO_PAGE pointer
- drop ISA_DMA_API support
- fix comment typos
- fixes for undefined symbols
- remove unused code and variables
- elf-fdpic loader support for m68k"
* tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix 68000 CPU link with no platform selected
m68k: removed unused "mach_get_ss"
m68knommu: fix undefined reference to `mach_get_rtc_pll'
m68knommu: fix undefined reference to `_init_sp'
m68knommu: allow elf_fdpic loader to be selected
m68knommu: add definitions to support elf_fdpic program loader
m68knommu: implement minimal regset support
m68knommu: use asm-generic/mmu.h for nommu setups
m68k: fix typos in comments
m68k: coldfire: drop ISA_DMA_API support
m68knommu: set ZERO_PAGE() to the allocated zeroed page
|
|
Those old syscalls aren't exported via our syscall table, so just drop
them.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Merge system power off handling rework from Dmitry Osipenko for
5.19-rc1.
This introduces a mechanism allowing power sequences to be used for
powering off the system and makes related changes in platform-specific
code for multiple platforms.
* pm-sysoff: (29 commits)
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
arm64: Use do_kernel_power_off()
riscv: Use do_kernel_power_off()
csky: Use do_kernel_power_off()
...
|
|
The generic audio card for Freescale platforms is used by a wide range
of i.MX systems and also has selects for the various audio controllers
used on them so will help with systems that don't use that specific card
too.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220513121258.168364-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late
SoCFPGA dts updates for v5.19
- dtschema fix SPI NOR node
- correct dt-bindings doc for Altera gpio driver
- add support for n6000 Agilex platform and dt-bindings documentation
* tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: add device tree for n6000
dt-bindings: intel: add binding for Intel n6000
dt-bindings: soc: add bindings for Intel HPS Copy Engine
dt-bindings: gpio: altera: correct interrupt-cells
ARM: dts: socfpga: align SPI NOR node name with dtschema
Link: https://lore.kernel.org/r/20220519232317.16079-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/late
ASPEED device tree updates for 5.19
- New machine:
* Nuvia's DC-SCM BMC
- Enable AST2600 GFX, the BMC-driven graphics device
- Add a bunch of devices for the AST2600 EVB
- Updates to the AST2600 Bletchley machine
- Backwards compatible changes to support the new spi-mem based SPI NOR
driver
* tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: ast2600-evb: Enable GFX device
ARM: dts: aspeed: Add GFX node to AST2600
ARM: dts: aspeed: ast2600-evb: Enable virtual hub
ARM: dts: aspeed: ast2600-evb: Enable video engine
ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO
ARM: dts: aspeed: Add Nuvia DC-SCM BMC
ARM: dts: aspeed: bletchley: add sample averaging for ADM1278
ARM: dts: aspeed: bletchley: add eeprom node on each sled
ARM: dts: aspeed: bletchley: add pca9536 node on each sled
ARM: dts: aspeed: bletchley: update gpio0 line names
ARM: dts: aspeed: bletchley: Enable mdio0 bus
ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc
ARM: dts: aspeed: bletchley: enable ehci0 device node
ARM: dts: aspeed: Add USB2.0 device controller node
ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
ARM: dts: aspeed: Enable Dual SPI RX transfers
ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1
Link: https://lore.kernel.org/r/CACPK8XfUmFxU8Y6C+aZ2+=dT7=fCfs2=2_aYqyRjoXCoeQaUWQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Harden hv_sock driver (Andrea Parri)
- Harden Hyper-V PCI driver (Andrea Parri)
- Fix multi-MSI for Hyper-V PCI driver (Jeffrey Hugo)
- Fix Hyper-V PCI to reduce boot time (Dexuan Cui)
- Remove code for long EOL'ed Hyper-V versions (Michael Kelley, Saurabh
Sengar)
- Fix balloon driver error handling (Shradha Gupta)
- Fix a typo in vmbus driver (Julia Lawall)
- Ignore vmbus IMC device (Michael Kelley)
- Add a new error message to Hyper-V DRM driver (Saurabh Sengar)
* tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (28 commits)
hv_balloon: Fix balloon_probe() and balloon_remove() error handling
scsi: storvsc: Removing Pre Win8 related logic
Drivers: hv: vmbus: fix typo in comment
PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit()
PCI: hv: Add validation for untrusted Hyper-V values
PCI: hv: Fix interrupt mapping for multi-MSI
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7
video: hyperv_fb: Remove support for Hyper-V 2008 and 2008R2/Win7
scsi: storvsc: Remove support for Hyper-V 2008 and 2008R2/Win7
Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7
x86/hyperv: Disable hardlockup detector by default in Hyper-V guests
drm/hyperv: Add error message for fb size greater than allocated
PCI: hv: Do not set PCI_COMMAND_MEMORY to reduce VM boot time
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
Drivers: hv: vmbus: Refactor the ring-buffer iterator functions
Drivers: hv: vmbus: Accept hv_sock offers in isolated guests
hv_sock: Add validation for untrusted Hyper-V values
hv_sock: Copy packets sent by Hyper-V out of the ring buffer
hv_sock: Check hv_pkt_iter_first_raw()'s return value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Pretty big this time. Mostly due to (nice) Renesas refactorings.
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting
both GPIO and pin control, improving a bunch of drivers in the
process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and
started to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas
drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into
proper sub-drivers"
* tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits)
pinctrl: apple: Use a raw spinlock for the regmap
pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs
pinctrl: intel: Fix kernel doc format, i.e. add return sections
dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'
pinctrl: starfive: Make the irqchip immutable
pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10
dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings
pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation
dt-bindings: pinctrl: rockchip: increase max amount of device functions
dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'
dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names
dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config
dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU
pinctrl: qcom: spmi-gpio: Add pm6125 compatible
dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible
pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl
pinctrl: intel: make irq_chip immutable
pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
...
|
|
If an unused weak function was traced, it's call to fentry will still
exist, which gets added into the __mcount_loc table. Ftrace will use
kallsyms to retrieve the name for each location in __mcount_loc to display
it in the available_filter_functions and used to enable functions via the
name matching in set_ftrace_filter/notrace. Enabling these functions do
nothing but enable an unused call to ftrace_caller. If a traced weak
function is overridden, the symbol of the function would be used for it,
which will either created duplicate names, or if the previous function was
not traced, it would be incorrectly be listed in available_filter_functions
as a function that can be traced.
This became an issue with BPF[1] as there are tooling that enables the
direct callers via ftrace but then checks to see if the functions were
actually enabled. The case of one function that was marked notrace, but
was followed by an unused weak function that was traced. The unused
function's call to fentry was added to the __mcount_loc section, and
kallsyms retrieved the untraced function's symbol as the weak function was
overridden. Since the untraced function would not get traced, the BPF
check would detect this and fail.
The real fix would be to fix kallsyms to not show addresses of weak
functions as the function before it. But that would require adding code in
the build to add function size to kallsyms so that it can know when the
function ends instead of just using the start of the next known symbol.
In the mean time, this is a work around. Add a FTRACE_MCOUNT_MAX_OFFSET
macro that if defined, ftrace will ignore any function that has its call
to fentry/mcount that has an offset from the symbol that is greater than
FTRACE_MCOUNT_MAX_OFFSET.
If CONFIG_HAVE_FENTRY is defined for x86, define FTRACE_MCOUNT_MAX_OFFSET
to zero (unless IBT is enabled), which will have ftrace ignore all locations
that are not at the start of the function (or one after the ENDBR
instruction).
A worker thread is added at boot up to scan all the ftrace record entries,
and will mark any that fail the FTRACE_MCOUNT_MAX_OFFSET test as disabled.
They will still appear in the available_filter_functions file as:
__ftrace_invalid_address___<invalid-offset>
(showing the offset that caused it to be invalid).
This is required for tools that use libtracefs (like trace-cmd does) that
scan the available_filter_functions and enable set_ftrace_filter and
set_ftrace_notrace using indexes of the function listed in the file (this
is a speedup, as enabling thousands of files via names is an O(n^2)
operation and can take minutes to complete, where the indexing takes less
than a second).
The invalid functions cannot be removed from available_filter_functions as
the names there correspond to the ftrace records in the array that manages
them (and the indexing depends on this).
[1] https://lore.kernel.org/all/20220412094923.0abe90955e5db486b7bca279@kernel.org/
Link: https://lkml.kernel.org/r/20220526141912.794c2786@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)
- Log E820 clipping better (Bjorn Helgaas)
- Add kernel cmdline options to enable/disable E820 clipping (Hans de
Goede)
- Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
usable address space for touchpads, Thunderbolt devices, etc (Hans
de Goede)
- Disable E820 clipping by default starting in 2023 (Hans de Goede)
PCI device hotplug:
- Include files to remove implicit dependencies (Christophe Leroy)
- Only put Root Ports in D3 if they can signal and wake from D3 so
AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)
Power management:
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
it's unused otherwise (Krzysztof Kozlowski)
- Power up devices completely, including anything platform firmware
needs to do, during runtime resume (Rafael J. Wysocki)
- Move pci_resume_bus() to PM callbacks so we observe the required
bridge power-up delays (Rafael J. Wysocki)
- Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)
- Split pci_raw_set_power_state() between pci_power_up() and a new
pci_set_low_power_state() (Rafael J. Wysocki)
- Set current_state to D3cold if config read returns ~0, indicating
the device is not accessible (Rafael J. Wysocki)
- Do not call pci_update_current_state() from pci_power_up() so BARs
and ASPM config are restored correctly (Rafael J. Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split pci_power_up() to pci_set_full_power_state() to avoid some
redundant operations (Rafael J. Wysocki)
- Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)
- Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)
- Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
Wysocki)
Virtualization:
- Acquire device lock before config space access lock to avoid AB/BA
deadlock with sriov_numvfs_store() (Yicong Yang)
Error handling:
- Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
leave permanently set (Kuppuswamy Sathyanarayanan)
Peer-to-peer DMA:
- Whitelist Intel Skylake-E Root Ports regardless of which devfn they
are (Shlomo Pongratz)
ASPM:
- Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
can be enabled (Mika Westerberg)
Cadence PCIe controller driver:
- Set up device-specific register to allow PTM Responder to be
enabled by the normal architected bit (Christian Gmeiner)
- Override advertised FLR support since the controller doesn't
implement FLR correctly (Parshuram Thombare)
Cadence PCIe endpoint driver:
- Correct bitmap size for the ob_region_map of outbound window usage
(Dan Carpenter)
Freescale i.MX6 PCIe controller driver:
- Fix PERST# assertion/deassertion so we observe the required delays
before accessing device (Francesco Dolcini)
Freescale Layerscape PCIe controller driver:
- Add "big-endian" DT property (Hou Zhiqiang)
- Update SCFG DT property (Hou Zhiqiang)
- Add "aer", "pme", "intr" DT properties (Li Yang)
- Add DT compatible strings for ls1028a (Xiaowei Bao)
Intel VMD host bridge driver:
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
Marvell MVEBU PCIe controller driver:
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali
Rohár)
MediaTek PCIe controller driver:
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
MediaTek PCIe Gen3 controller driver:
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
and mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
NVIDIA Tegra194 PCIe controller driver:
- Drop tegra194 MSI register save/restore, which is unnecessary since
the DWC core does it (Jisheng Zhang)
Qualcomm PCIe controller driver:
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for
MSM8996/APQ8096 platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry
Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding
(Dmitry Baryshkov)
Rockchip PCIe controller driver:
- Fix bitmap size when searching for free outbound region (Dan
Carpenter)
Rockchip DesignWare PCIe controller driver:
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
because it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
Synopsys DesignWare PCIe controller driver:
- Return error instead of success if DMA mapping of MSI area fails
(Jiantao Zhang)
Miscellaneous:
- Change pci_set_dma_mask() documentation references to
dma_set_mask() (Alex Williamson)"
* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
x86/PCI: Disable E820 reserved region clipping starting in 2023
x86/PCI: Disable E820 reserved region clipping via quirks
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
PCI: microchip: Fix potential race in interrupt handling
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
PCI: vmd: Assign VMD IRQ domain before enumeration
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
PCI: rockchip-dwc: Add legacy interrupt support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/late
Clock properties for cru nodes to match the yaml-converted bindings
and renaming of Quartz-A bluetooth pin nodename to not conflict with
Yaml constraints.
* tag 'v5.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
Link: https://lore.kernel.org/r/7695907.Sb9uPGUboI@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/late
Amba and clock fixes to conform better to actual dt-bindings.
* tag 'v5.19-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
Link: https://lore.kernel.org/r/4798587.jE0xQCEvom@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Six hotfixes.
The page_table_check one from Miaohe Lin is considered a minor thing
so it isn't marked for -stable. The remainder address pre-5.19 issues
and are cc:stable"
* tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_table_check: fix accessing unmapped ptep
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
mm/page_alloc: always attempt to allocate at least one page during bulk allocation
hugetlb: fix huge_pmd_unshare address update
zsmalloc: fix races between asynchronous zspage free and page migration
Revert "mm/cma.c: remove redundant cma_mutex lock"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
|
|
Fix the arm64 build error which was caused by commit ae07562909f3 ("mm:
change huge_ptep_clear_flush() to return the original pte") interacting
with commit fb396bb459c1 ("arm64/hugetlb: Drop TLB flush from
get_clear_flush()"):
arch/arm64/mm/hugetlbpage.c: In function ‘huge_ptep_clear_flush’:
arch/arm64/mm/hugetlbpage.c:515:9: error: implicit declaration of function ‘get_clear_flush’; did you mean ‘ptep_clear_flush’? [-Werror=implicit-function-declaration]
515 | return get_clear_flush(vma->vm_mm, addr, ptep, pgsize, ncontig);
| ^~~~~~~~~~~~~~~
| ptep_clear_flush
Due to the new get_clear_contig() has dropped TLB flush, we should add
an explicit TLB flush in huge_ptep_clear_flush() to keep original
semantics when changing to use new get_clear_contig().
Fixes: fb396bb459c1 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()").
Fixes: ae07562909f3 ("mm: change huge_ptep_clear_flush() to return the original pte")
Reported-and-tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The bluetooth binding for the Quartz64 Model A has incorrectly named
host-wakeup and device-wakeup gpios. Rename them to clear some dtbs_check
warnings.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220511150117.113070-4-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks and clock-names because the device has to have
at least one input clock.
Also in case someone wants to add properties that start with
assign-xxx to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329180550.31043-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks and clock-names to the rk3308 cru node, because
the device has to have at least one input clock.
Also in case someone wants to add properties that start with
assign-xxx to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
With the addition of new properties also sort the node properties
a little bit.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329184339.1134-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The rk356x cru requires a 24m clock input to function. Add the clocks
properties to the cru to clear some dtbs_check warnings.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220511150117.113070-3-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks and clock-names to the rk3228 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330121923.24240-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks and clock-names to the rk3036 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330114847.18633-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks property to rk3066a/rk3188 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329111323.3569-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks property to rk3288 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329113657.4567-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful
purpose, and certainly bear no relation at all to the actual underlying
interconnect topology. They appear to be cargo-cult copying from a
design misstep in the very early days of FDT adoption on ARM, which was
righted with the "arm,primecell" compatible, and the last trace of the
idea finally purged by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop
"arm,amba-bus" in favor of "simple-bus"").
As such, they can simply be removed and the DMA-330 nodes fitted into
the normal sort order.
The node names should be generic, so rename it to "dma-controller".
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330131608.30040-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clocks and clock-names to the rv1108 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330131608.30040-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.
Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1
[akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h]
Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The '#dma-channels' property was deprecated in favor of one defined by
generic dma-common DT bindings. Add new property while keeping old one
for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/20220516142857.6419-4-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The '#dma-channels' property was deprecated in favor of one defined by
generic dma-common DT bindings. Add new property while keeping old one
for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220516142857.6419-3-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The '#dma-channels' and '#dma-requests' properties were deprecated in
favor of these defined by generic dma-common DT bindings. Add new
properties while keeping old ones for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220516142857.6419-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
