| Age | Commit message (Collapse) | Author |
|---|
|
When kernel handles the vm-exit caused by external interrupts and NMI,
it always sets kvm_intr_type to tell if it's dealing an IRQ or NMI. For
the PMI scenario, it could be IRQ or NMI.
However, intel_pt PMIs are only generated for HARDWARE perf events, and
HARDWARE events are always configured to generate NMIs. Use
kvm_handling_nmi_from_guest() to precisely identify if the intel_pt PMI
came from the guest; this avoids false positives if an intel_pt PMI/NMI
arrives while the host is handling an unrelated IRQ VM-Exit.
Fixes: db215756ae59 ("KVM: x86: More precisely identify NMI from guest when handling PMI")
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Message-Id: <20220523140821.1345605-1-yanfei.xu@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit ddd7ed842627 ("x86/kvm: Alloc dummy async #PF token outside of
raw spinlock") leads to the following Smatch static checker warning:
arch/x86/kernel/kvm.c:212 kvm_async_pf_task_wake()
warn: sleeping in atomic context
arch/x86/kernel/kvm.c
202 raw_spin_lock(&b->lock);
203 n = _find_apf_task(b, token);
204 if (!n) {
205 /*
206 * Async #PF not yet handled, add a dummy entry for the token.
207 * Allocating the token must be down outside of the raw lock
208 * as the allocator is preemptible on PREEMPT_RT kernels.
209 */
210 if (!dummy) {
211 raw_spin_unlock(&b->lock);
--> 212 dummy = kzalloc(sizeof(*dummy), GFP_KERNEL);
^^^^^^^^^^
Smatch thinks the caller has preempt disabled. The `smdb.py preempt
kvm_async_pf_task_wake` output call tree is:
sysvec_kvm_asyncpf_interrupt() <- disables preempt
-> __sysvec_kvm_asyncpf_interrupt()
-> kvm_async_pf_task_wake()
The caller is this:
arch/x86/kernel/kvm.c
290 DEFINE_IDTENTRY_SYSVEC(sysvec_kvm_asyncpf_interrupt)
291 {
292 struct pt_regs *old_regs = set_irq_regs(regs);
293 u32 token;
294
295 ack_APIC_irq();
296
297 inc_irq_stat(irq_hv_callback_count);
298
299 if (__this_cpu_read(apf_reason.enabled)) {
300 token = __this_cpu_read(apf_reason.token);
301 kvm_async_pf_task_wake(token);
302 __this_cpu_write(apf_reason.token, 0);
303 wrmsrl(MSR_KVM_ASYNC_PF_ACK, 1);
304 }
305
306 set_irq_regs(old_regs);
307 }
The DEFINE_IDTENTRY_SYSVEC() is a wrapper that calls this function
from the call_on_irqstack_cond(). It's inside the call_on_irqstack_cond()
where preempt is disabled (unless it's already disabled). The
irq_enter/exit_rcu() functions disable/enable preempt.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The timer is disarmed when switching between TSC deadline and other modes;
however, the pending timer is still in-flight, so let's accurately remove
any traces of the previous mode.
Fixes: 4427593258 ("KVM: x86: thoroughly disarm LAPIC timer around TSC deadline switch")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop the raw spinlock in kvm_async_pf_task_wake() before allocating the
the dummy async #PF token, the allocator is preemptible on PREEMPT_RT
kernels and must not be called from truly atomic contexts.
Opportunistically document why it's ok to loop on allocation failure,
i.e. why the function won't get stuck in an infinite loop.
Reported-by: Yajun Deng <yajun.deng@linux.dev>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Whenever x86_decode_emulated_instruction() detects a breakpoint, it
returns the value that kvm_vcpu_check_breakpoint() writes into its
pass-by-reference second argument. Unfortunately this is completely
bogus because the expected outcome of x86_decode_emulated_instruction
is an EMULATION_* value.
Then, if kvm_vcpu_check_breakpoint() does "*r = 0" (corresponding to
a KVM_EXIT_DEBUG userspace exit), it is misunderstood as EMULATION_OK
and x86_emulate_instruction() is called without having decoded the
instruction. This causes various havoc from running with a stale
emulation context.
The fix is to move the call to kvm_vcpu_check_breakpoint() where it was
before commit 4aa2691dcbd3 ("KVM: x86: Factor out x86 instruction
emulation with decoding") introduced x86_decode_emulated_instruction().
The other caller of the function does not need breakpoint checks,
because it is invoked as part of a vmexit and the processor has already
checked those before executing the instruction that #GP'd.
This fixes CVE-2022-1852.
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Fixes: 4aa2691dcbd3 ("KVM: x86: Factor out x86 instruction emulation with decoding")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311032801.3467418-2-seanjc@google.com>
[Rewrote commit message according to Qiuhao's report, since a patch
already existed to fix the bug. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For some sev ioctl interfaces, the length parameter that is passed maybe
less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data
that PSP firmware returns. In this case, kmalloc will allocate memory
that is the size of the input rather than the size of the data.
Since PSP firmware doesn't fully overwrite the allocated buffer, these
sev ioctl interface may return uninitialized kernel slab memory.
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Peter Gonda <pgonda@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: eaf78265a4ab3 ("KVM: SVM: Move SEV code to separate file")
Fixes: 2c07ded06427d ("KVM: SVM: add support for SEV attestation command")
Fixes: 4cfdd47d6d95a ("KVM: SVM: Add KVM_SEV SEND_START command")
Fixes: d3d1af85e2c75 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Fixes: eba04b20e4861 ("KVM: x86: Account a variety of miscellaneous allocations")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220516154310.3685678-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave',
i.e. to KVM's historical uABI size. When saving FPU state for usersapce,
KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if
the host doesn't support XSAVE. Setting the XSAVE header allows the VM
to be migrated to a host that does support XSAVE without the new host
having to handle FPU state that may or may not be compatible with XSAVE.
Setting the uABI size to the host's default size results in out-of-bounds
writes (setting the FP+SSE bits) and data corruption (that is thankfully
caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs.
WARN if the default size is larger than KVM's historical uABI size; all
features that can push the FPU size beyond the historical size must be
opt-in.
==================================================================
BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130
Read of size 8 at addr ffff888011e33a00 by task qemu-build/681
CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1
Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x45
print_report.cold+0x45/0x575
kasan_report+0x9b/0xd0
fpu_copy_uabi_to_guest_fpstate+0x86/0x130
kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm]
kvm_vcpu_ioctl+0x47f/0x7b0 [kvm]
__x64_sys_ioctl+0x5de/0xc90
do_syscall_64+0x31/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Allocated by task 0:
(stack is not available)
The buggy address belongs to the object at ffff888011e33800
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes to the right of
512-byte region [ffff888011e33800, ffff888011e33a00)
The buggy address belongs to the physical page:
page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30
head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=1)
raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
Fixes: be50b2065dfa ("kvm: x86: Add support for getting/setting expanded xstate buffer")
Fixes: c60427dd50ba ("x86/fpu: Add uabi_size to guest_fpu")
Reported-by: Zdenek Kaspar <zkaspar82@gmail.com>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Zdenek Kaspar <zkaspar82@gmail.com>
Message-Id: <20220504001219.983513-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix and feature for 5.19
- ultravisor communication device driver
- fix TEID on terminating storage key ops
|
|
KVM/riscv changes for 5.19
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
|
|
In commit ec0671d5684a ("KVM: LAPIC: Delay trace_kvm_wait_lapic_expire
tracepoint to after vmexit", 2019-06-04), trace_kvm_wait_lapic_expire
was moved after guest_exit_irqoff() because invoking tracepoints within
kvm_guest_enter/kvm_guest_exit caused a lockdep splat.
These days this is not necessary, because commit 87fa7f3e98a1 ("x86/kvm:
Move context tracking where it belongs", 2020-07-09) restricted
the RCU extended quiescent state to be closer to vmentry/vmexit.
Moving the tracepoint back to __kvm_wait_lapic_expire is more accurate,
because it will be reported even if vcpu_enter_guest causes multiple
vmentries via the IPI/Timer fast paths, and it allows the removal of
advance_expire_delta.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1650961551-38390-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If user space uses a memop to emulate an instruction and that
memop fails, the execution of the instruction ends.
Instruction execution can end in different ways, one of which is
suppression, which requires that the instruction execute like a no-op.
A writing memop that spans multiple pages and fails due to key
protection may have modified guest memory, as a result, the likely
correct ending is termination. Therefore, do not indicate a
suppressing instruction ending in this case.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512131019.2594948-2-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
This patch adds a new miscdevice to expose some Ultravisor functions
to userspace. Userspace can send IOCTLs to the uvdevice that will then
emit a corresponding Ultravisor Call and hands the result over to
userspace. The uvdevice is available if the Ultravisor Call facility is
present.
Userspace can call the Retrieve Attestation Measurement
Ultravisor Call using IOCTLs on the uvdevice.
The uvdevice will do some sanity checks first.
Then, copy the request data to kernel space, build the UVCB,
perform the UV call, and copy the result back to userspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/
Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> (whitespace and tristate fixes, pick)
|
|
Currently, there is no provision for vmm (qemu-kvm or kvmtool) to
query about multiple-letter ISA extensions. The config register
is only used for base single letter ISA extensions.
A new ISA extension register is added that will allow the vmm
to query about any ISA extension one at a time. It is enabled for
both single letter or multi-letter ISA extensions. The ISA extension
register is useful to if the vmm requires to retrieve/set single
extension while the config register should be used if all the base
ISA extension required to retrieve or set.
For any multi-letter ISA extensions, the new register interface
must be used.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
On RISC-V platforms with hardware VMID support, we share same
VMID for all VCPUs of a particular Guest/VM. This means we might
have stale G-stage TLB entries on the current Host CPU due to
some other VCPU of the same Guest which ran previously on the
current Host CPU.
To cleanup stale TLB entries, we simply flush all G-stage TLB
entries by VMID whenever underlying Host CPU changes for a VCPU.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The generic KVM has support for VCPU requests which can be used
to do arch-specific work in the run-loop. We introduce remote
HFENCE functions which will internally use VCPU requests instead
of host SBI calls.
Advantages of doing remote HFENCEs as VCPU requests are:
1) Multiple VCPUs of a Guest may be running on different Host CPUs
so it is not always possible to determine the Host CPU mask for
doing Host SBI call. For example, when VCPU X wants to do HFENCE
on VCPU Y, it is possible that VCPU Y is blocked or in user-space
(i.e. vcpu->cpu < 0).
2) To support nested virtualization, we will be having a separate
shadow G-stage for each VCPU and a common host G-stage for the
entire Guest/VM. The VCPU requests based remote HFENCEs helps
us easily synchronize the common host G-stage and shadow G-stage
of each VCPU without any additional IPI calls.
This is also a preparatory patch for upcoming nested virtualization
support where we will be having a shadow G-stage page table for
each Guest VCPU.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently, the KVM_MAX_VCPUS value is 16384 for RV64 and 128
for RV32.
The KVM_MAX_VCPUS value is too high for RV64 and too low for
RV32 compared to other architectures (e.g. x86 sets it to 1024
and ARM64 sets it to 512). The too high value of KVM_MAX_VCPUS
on RV64 also leads to VCPU mask on stack consuming 2KB.
We set KVM_MAX_VCPUS to 1024 for both RV64 and RV32 to be
aligned other architectures.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Various __kvm_riscv_hfence_xyz() functions implemented in the
kvm/tlb.S are equivalent to corresponding HFENCE.GVMA instructions
and we don't have range based local HFENCE functions.
This patch provides complete set of local HFENCE functions which
supports range based TLB invalidation and supports HFENCE.VVMA
based functions. This is also a preparatory patch for upcoming
Svinval support in KVM RISC-V.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We should treat SBI HFENCE calls as NOPs until nested virtualization
is supported by KVM RISC-V. This will help us test booting a hypervisor
under KVM RISC-V.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Latest QEMU supports G-stage Sv57x4 mode so this patch extends KVM
RISC-V G-stage handling to detect and use Sv57x4 mode when available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The two-stage address translation defined by the RISC-V privileged
specification defines: VS-stage (guest virtual address to guest
physical address) programmed by the Guest OS and G-stage (guest
physical addree to host physical address) programmed by the
hypervisor.
To align with above terminology, we replace "stage2" with "gstage"
and "Stage2" with "G-stage" name everywhere in KVM RISC-V sources.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
* kvm-arm64/its-save-restore-fixes-5.19:
: .
: Tighten the ITS save/restore infrastructure to fail early rather
: than late. Patches courtesy of Rocardo Koller.
: .
KVM: arm64: vgic: Undo work in failed ITS restores
KVM: arm64: vgic: Do not ignore vgic_its_restore_cte failures
KVM: arm64: vgic: Add more checks when restoring ITS tables
KVM: arm64: vgic: Check that new ITEs could be saved in guest memory
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/misc-5.19:
: .
: Misc fixes and general improvements for KVMM/arm64:
:
: - Better handle out of sequence sysregs in the global tables
:
: - Remove a couple of unnecessary loads from constant pool
:
: - Drop unnecessary pKVM checks
:
: - Add all known M1 implementations to the SEIS workaround
:
: - Cleanup kerneldoc warnings
: .
KVM: arm64: vgic-v3: List M1 Pro/Max as requiring the SEIS workaround
KVM: arm64: pkvm: Don't mask already zeroed FEAT_SVE
KVM: arm64: pkvm: Drop unnecessary FP/SIMD trap handler
KVM: arm64: nvhe: Eliminate kernel-doc warnings
KVM: arm64: Avoid unnecessary absolute addressing via literals
KVM: arm64: Print emulated register table name when it is unsorted
KVM: arm64: Don't BUG_ON() if emulated register table is unsorted
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/per-vcpu-host-pmu-data:
: .
: Pass the host PMU state in the vcpu to avoid the use of additional
: shared memory between EL1 and EL2 (this obviously only applies
: to nVHE and Protected setups).
:
: Patches courtesy of Fuad Tabba.
: .
KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selected
KVM: arm64: Reenable pmu in Protected Mode
KVM: arm64: Pass pmu events to hyp via vcpu
KVM: arm64: Repack struct kvm_pmu to reduce size
KVM: arm64: Wrapper for getting pmu_events
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/vgic-invlpir:
: .
: Implement MMIO-based LPI invalidation for vGICv3.
: .
KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision
KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidation
KVM: arm64: vgic-v3: Expose GICR_CTLR.RWP when disabling LPIs
irqchip/gic-v3: Exposes bit values for GICR_CTLR.{IR, CES}
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/psci-suspend:
: .
: Add support for PSCI SYSTEM_SUSPEND and allow userspace to
: filter the wake-up events.
:
: Patches courtesy of Oliver.
: .
Documentation: KVM: Fix title level for PSCI_SUSPEND
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We generally want to disallow hypercall bitmaps being changed
once vcpus have already run. But we must allow the write if
the written value is unchanged so that userspace can rewrite
the register file on reboot, for example.
Without this, a QEMU-based VM will fail to reboot correctly.
The original code was correct, and it is me that introduced
the regression.
Fixes: 05714cab7d63 ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Failed ITS restores should clean up all state restored until the
failure. There is some cleanup already present when failing to restore
some tables, but it's not complete. Add the missing cleanup.
Note that this changes the behavior in case of a failed restore of the
device tables.
restore ioctl:
1. restore collection tables
2. restore device tables
With this commit, failures in 2. clean up everything created so far,
including state created by 1.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510001633.552496-5-ricarkol@google.com
|
|
Restoring a corrupted collection entry (like an out of range ID) is
being ignored and treated as success. More specifically, a
vgic_its_restore_cte failure is treated as success by
vgic_its_restore_collection_table. vgic_its_restore_cte uses positive
and negative numbers to return error, and +1 to return success. The
caller then uses "ret > 0" to check for success.
Fix this by having vgic_its_restore_cte only return negative numbers on
error. Do this by changing alloc_collection return codes to only return
negative numbers on error.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510001633.552496-4-ricarkol@google.com
|
|
Try to improve the predictability of ITS save/restores (and debuggability
of failed ITS saves) by failing early on restore when trying to read
corrupted tables.
Restoring the ITS tables does some checks for corrupted tables, but not as
many as in a save: an overflowing device ID will be detected on save but
not on restore. The consequence is that restoring a corrupted table won't
be detected until the next save; including the ITS not working as expected
after the restore. As an example, if the guest sets tables overlapping
each other, which would most likely result in some corrupted table, this is
what we would see from the host point of view:
guest sets base addresses that overlap each other
save ioctl
restore ioctl
save ioctl (fails)
Ideally, we would like the first save to fail, but overlapping tables could
actually be intended by the guest. So, let's at least fail on the restore
with some checks: like checking that device and event IDs don't overflow
their tables.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510001633.552496-3-ricarkol@google.com
|
|
Try to improve the predictability of ITS save/restores by failing
commands that would lead to failed saves. More specifically, fail any
command that adds an entry into an ITS table that is not in guest
memory, which would otherwise lead to a failed ITS save ioctl. There
are already checks for collection and device entries, but not for
ITEs. Add the corresponding check for the ITT when adding ITEs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510001633.552496-2-ricarkol@google.com
|
|
Moving kvm_pmu_events into the vcpu (and refering to it) broke the
somewhat unusual case where the kernel has no support for a PMU
at all.
In order to solve this, move things around a bit so that we can
easily avoid refering to the pmu structure outside of PMU-aware
code. As a bonus, pmu.c isn't compiled in when HW_PERF_EVENTS
isn't selected.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/202205161814.KQHpOzsJ-lkp@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.
Thanks to: Alexander Graf, and Matt Evans.
* tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the handling of unpopulated sub-pmd spaces.
The copy & pasta from the corresponding s390 code screwed up the
address calculation for marking the sub-pmd ranges via memset by
omitting the ALIGN_DOWN() to calculate the proper start address.
It's a mystery why this code is not generic and shared because there
is nothing architecture specific in there, but that's too intrusive
for a backportable fix"
* tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix marking of unused sub-pmd ranges
|
|
These constants will change over time, and userspace has no
business knowing about them. Hide them behind __KERNEL__.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that the pmu code does not access hyp data, reenable it in
protected mode.
Once fully supported, protected VMs will not have pmu support,
since that could leak information. However, non-protected VMs in
protected mode should have pmu support if available.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-5-tabba@google.com
|
|
Instead of the host accessing hyp data directly, pass the pmu
events of the current cpu to hyp via the vcpu.
This adds 64 bits (in two fields) to the vcpu that need to be
synced before every vcpu run in nvhe and protected modes.
However, it isolates the hypervisor from the host, which allows
us to use pmu in protected mode in a subsequent patch.
No visible side effects in behavior intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-4-tabba@google.com
|
|
Eases migrating away from using hyp data and simplifies the code.
No functional change intended.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-2-tabba@google.com
|
|
Unsusprisingly, Apple M1 Pro/Max have the exact same defect as the
original M1 and generate random SErrors in the host when a guest
tickles the GICv3 CPU interface the wrong way.
Add the part numbers for both the CPU types found in these two
new implementations, and add them to the hall of shame. This also
applies to the Ultra version, as it is composed of 2 Max SoCs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220514102524.3188730-1-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Seven MM fixes, three of which address issues added in the most recent
merge window, four of which are cc:stable.
Three non-MM fixes, none very serious"
[ And yes, that's a real pull request from Andrew, not me creating a
branch from emailed patches. Woo-hoo! ]
* tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add a mailing list for DAMON development
selftests: vm: Makefile: rename TARGETS to VMTARGETS
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
mailmap: add entry for martyna.szapar-mudlaw@intel.com
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
procfs: prevent unprivileged processes accessing fdinfo dir
mm: mremap: fix sign for EFAULT error return value
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
mm/huge_memory: do not overkill when splitting huge_zero_page
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- TLB invalidation workaround for Qualcomm Kryo-4xx "gold" CPUs
- Fix broken dependency in the vDSO Makefile
- Fix pointer authentication overrides in ISAR2 ID register
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs
arm64: cpufeature: remove duplicate ID_AA64ISAR2_EL1 entry
arm64: vdso: fix makefile dependency on vdso.so
|
|
The unused part precedes the new range spanned by the start, end parameters
of vmemmap_use_new_sub_pmd(). This means it actually goes from
ALIGN_DOWN(start, PMD_SIZE) up to start.
Use the correct address when applying the mark using memset.
Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220509090637.24152-2-ken@codelabs.ch
|
|
Avoid calling handlers on empty rmap entries and skip to the next non
empty rmap entry.
Empty rmap entries are noop in handlers.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220502220347.174664-1-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Intel MKTME KeyID bits (including Intel TDX private KeyID bits) should
never be set to SPTE. Set shadow_me_value to 0 and shadow_me_mask to
include all MKTME KeyID bits to include them to shadow_zero_check.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <27bc10e97a3c0b58a4105ff9107448c190328239.1650363789.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Intel Multi-Key Total Memory Encryption (MKTME) repurposes couple of
high bits of physical address bits as 'KeyID' bits. Intel Trust Domain
Extentions (TDX) further steals part of MKTME KeyID bits as TDX private
KeyID bits. TDX private KeyID bits cannot be set in any mapping in the
host kernel since they can only be accessed by software running inside a
new CPU isolated mode. And unlike to AMD's SME, host kernel doesn't set
any legacy MKTME KeyID bits to any mapping either. Therefore, it's not
legitimate for KVM to set any KeyID bits in SPTE which maps guest
memory.
KVM maintains shadow_zero_check bits to represent which bits must be
zero for SPTE which maps guest memory. MKTME KeyID bits should be set
to shadow_zero_check. Currently, shadow_me_mask is used by AMD to set
the sme_me_mask to SPTE, and shadow_me_shadow is excluded from
shadow_zero_check. So initializing shadow_me_mask to represent all
MKTME keyID bits doesn't work for VMX (as oppositely, they must be set
to shadow_zero_check).
Introduce a new 'shadow_me_value' to replace existing shadow_me_mask,
and repurpose shadow_me_mask as 'all possible memory encryption bits'.
The new schematic of them will be:
- shadow_me_value: the memory encryption bit(s) that will be set to the
SPTE (the original shadow_me_mask).
- shadow_me_mask: all possible memory encryption bits (which is a super
set of shadow_me_value).
- For now, shadow_me_value is supposed to be set by SVM and VMX
respectively, and it is a constant during KVM's life time. This
perhaps doesn't fit MKTME but for now host kernel doesn't support it
(and perhaps will never do).
- Bits in shadow_me_mask are set to shadow_zero_check, except the bits
in shadow_me_value.
Introduce a new helper kvm_mmu_set_me_spte_mask() to initialize them.
Replace shadow_me_mask with shadow_me_value in almost all code paths,
except the one in PT64_PERM_MASK, which is used by need_remote_flush()
to determine whether remote TLB flush is needed. This should still use
shadow_me_mask as any encryption bit change should need a TLB flush.
And for AMD, move initializing shadow_me_value/shadow_me_mask from
kvm_mmu_reset_all_pte_masks() to svm_hardware_setup().
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <f90964b93a3398b1cf1c56f510f3281e0709e2ab.1650363789.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename reset_rsvds_bits_mask() to reset_guest_rsvds_bits_mask() to make
it clearer that it resets the reserved bits check for guest's page table
entries.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <efdc174b85d55598880064b8bf09245d3791031d.1650363789.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Expand and clean up the page fault stats. The current stats are at best
incomplete, and at worst misleading. Differentiate between faults that
are actually fixed vs those that result in an MMIO SPTE being created,
track faults that are spurious, faults that trigger emulation, faults
that that are fixed in the fast path, and last but not least, track the
number of faults that are taken.
Note, the number of faults that require emulation for write-protected
shadow pages can roughly be calculated by subtracting the number of MMIO
SPTEs created from the overall number of faults that trigger emulation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220423034752.1161007-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use IS_ENABLED() instead of an #ifdef to activate the anti-RETPOLINE fast
path for TDP page faults. The generated code is identical, and the #ifdef
makes it dangerously difficult to extend the logic (guess who forgot to
add an "else" inside the #ifdef and ran through the page fault handler
twice).
No functional or binary change intented.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220423034752.1161007-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
