Age | Commit message (Collapse) | Author |
|
With FEAT_ECV and the 1GHz counter, it is pretty likely that the
event stream divider doesn't fit in the field that holds the
divider value (we only have 4 bits to describe counter bits [15:0]
Thankfully, FEAT_ECV also provides a scaling mechanism to switch
the field to cover counter bits [23:8] instead.
Enable this on arm64 when ECV is available (32bit doesn't have
any detection infrastructure and is unlikely to be run on an
ARMv8.6 system anyway).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220203170502.2694422-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
erratum_set_next_event_generic()
With some specific kernel configuration and Clang, the kernel fails
to like with something like:
ld.lld: error: undefined symbol: __compiletime_assert_200
>>> referenced by arch_timer.h:156 (./arch/arm64/include/asm/arch_timer.h:156)
>>> clocksource/arm_arch_timer.o:(erratum_set_next_event_generic) in archive drivers/built-in.a
ld.lld: error: undefined symbol: __compiletime_assert_197
>>> referenced by arch_timer.h:133 (./arch/arm64/include/asm/arch_timer.h:133)
>>> clocksource/arm_arch_timer.o:(erratum_set_next_event_generic) in archive drivers/built-in.a
make: *** [Makefile:1161: vmlinux] Error 1
These are due to the BUILD_BUG() macros contained in the low-level
accessors (arch_timer_reg_{write,read}_cp15) being emitted, as the
access type wasn't known at compile time.
Fix this by making erratum_set_next_event_generic() __force_inline,
resulting in the 'access' parameter to be resolved at compile time,
similarly to what is already done for set_next_event().
Fixes: 4775bc63f880 ("Add build-time guards for unhandled register accesses")
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211117113532.3895208-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Unfortunately, the architecture provides no means to determine the bit
width of the system counter. However, we do know the following from the
specification:
- the system counter is at least 56 bits wide
- Roll-over time of not less than 40 years
To date, the arch timer driver has depended on the first property,
assuming any system counter to be 56 bits wide and masking off the rest.
However, combining a narrow clocksource mask with a high frequency
counter could result in prematurely wrapping the system counter by a
significant margin. For example, a 56 bit wide, 1GHz system counter
would wrap in a mere 2.28 years!
This is a problem for two reasons: v8.6+ implementations are required to
provide a 64 bit, 1GHz system counter. Furthermore, before v8.6,
implementers may select a counter frequency of their choosing.
Fix the issue by deriving a valid clock mask based on the second
property from above. Set the floor at 56 bits, since we know no system
counter is narrower than that.
[maz: fixed width computation not to lose the last bit, added
max delta generation for the timer]
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210807191428.3488948-1-oupton@google.com
Link: https://lore.kernel.org/r/20211017124225.3018098-13-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
interface
TVAL usage is now long gone, get rid of the leftovers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-11-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Applied Micro XGene-1 SoC has a busted implementation of the
CVAL register: it looks like it is based on TVAL instead of the
other way around. The net effect of this implementation blunder
is that the maximum deadline you can program in the timer is
32bit wide.
Use a MIDR check to notice the broken CPU, and reduce the width
of the timer to 32bit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-10-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Proudly tell the code code that we have a timer able to handle
56 bits deltas.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-9-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Similarily to the sysreg-based timer, move the MMIO over to using
the CVAL registers instead of TVAL. Note that there is no warranty
that the 64bit MMIO access will be atomic, but the timer is always
disabled at the point where we program CVAL.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-8-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
ordering issue
The MMIO timer base address gets published after we have registered
the callbacks and the interrupt handler, which is... a bit dangerous.
Fix this by moving the base address publication to the point where
we register the timer, and expose a pointer to the timer structure
itself rather than a naked value.
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-7-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The '_tval' name in the erratum handling function names doesn't
make much sense anymore (and they were using CVAL the first place).
Drop the _tval tag.
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-6-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
over to CVAL
In order to cope better with high frequency counters, move the
programming of the timers from the countdown timer (TVAL) over
to the comparator (CVAL).
The programming model is slightly different, as we now need to
read the current counter value to have an absolute deadline
instead of a relative one.
There is a small overhead to this change, which we will address
in the following patches.
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-5-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
accessors to u64
The various accessors for the timer sysreg and MMIO registers are
currently hardwired to 32bit. However, we are about to introduce
the use of the CVAL registers, which require a 64bit access.
Upgrade the write side of the accessors to take a 64bit value
(the read side is left untouched as we don't plan to ever read
back any of these registers).
No functional change expected.
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-4-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The arch timer driver never reads the various TVAL registers, only
writes to them. It is thus pointless to provide accessors
for them and to implement errata workarounds.
Drop these read-side accessors, and add a couple of BUG() statements
for the time being. These statements will be removed further down
the line.
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-3-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
accesses
As we are about to change the registers that are used by the driver,
start by adding build-time checks to ensure that we always handle
all registers and access modes.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-2-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Bad counter reads are experienced sometimes when bit 10 or greater rolls
over. Originally, testing showed that at least 10 lower bits would be
set to the same value during these bad reads. However, some users still
reported time skips.
Wider testing revealed that on some chips, occasionally only the lowest
9 bits would read as the anomalous value. During these reads (which
still happen only when bit 10), bit 9 would read as the correct value.
Reduce the mask by one bit to cover these cases as well.
Cc: stable@vger.kernel.org
Fixes: c950ca8c35ee ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org
|
|
This variable is added by my mistake, it's not used at all.
Fixes: e2bf384d4329 ("clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210511154856.6afbcb65@xhacker.debian
|
|
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Apple M1 platform support from Arnd Bergmann:
"The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the commit message of
commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
AsahiLinux wiki"
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
asm-generic/io.h: Unbork ioremap_np() declaration
arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
dt-bindings: display: Add apple,simple-framebuffer
arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
irqchip/apple-aic: Add support for the Apple Interrupt Controller
dt-bindings: interrupt-controller: Add DT bindings for apple-aic
arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
of/address: Add infrastructure to declare MMIO as non-posted
asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
arm64: Implement ioremap_np() to map MMIO as nGnRnE
docs: driver-api: device-io: Document ioremap() variants & access funcs
docs: driver-api: device-io: Document I/O access functions
asm-generic/io.h: Add a non-posted variant of ioremap()
arm64: arch_timer: Implement support for interrupt-names
dt-bindings: timer: arm,arch_timer: Add interrupt-names support
arm64: cputype: Add CPU implementor & types for the Apple M1 cores
dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
dt-bindings: arm: apple: Add bindings for Apple ARM platforms
dt-bindings: vendor-prefixes: Add apple prefix
|
|
Some functions are not needed after booting, so mark them as __init
to move them to the .init section.
Some global variables are never modified after init, so can be
__ro_after_init.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210330140444.4fb2a7cb@xhacker.debian
|
|
This allows the devicetree to correctly represent the available set of
timers, which varies from device to device, without the need for fake
dummy interrupts for unavailable slots.
Also add the hyp-virt timer/PPI, which is not currently used, but worth
representing.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Currently, there is no mechanism to keep time sync between guest and host
in arm/arm64 virtualization environment. Time in guest will drift compared
with host after boot up as they may both use third party time sources
to correct their time respectively. The time deviation will be in order
of milliseconds. But in some scenarios,like in cloud environment, we ask
for higher time precision.
kvm ptp clock, which chooses the host clock source as a reference
clock to sync time between guest and host, has been adopted by x86
which takes the time sync order from milliseconds to nanoseconds.
This patch enables kvm ptp clock for arm/arm64 and improves clock sync precision
significantly.
Test result comparisons between with kvm ptp clock and without it in arm/arm64
are as follows. This test derived from the result of command 'chronyc
sources'. we should take more care of the last sample column which shows
the offset between the local clock and the source at the last measurement.
no kvm ptp in guest:
MS Name/IP address Stratum Poll Reach LastRx Last sample
========================================================================
^* dns1.synet.edu.cn 2 6 377 13 +1040us[+1581us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 21 +1040us[+1581us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 29 +1040us[+1581us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 37 +1040us[+1581us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 45 +1040us[+1581us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 53 +1040us[+1581us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 61 +1040us[+1581us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 4 -130us[ +796us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 12 -130us[ +796us] +/- 21ms
^* dns1.synet.edu.cn 2 6 377 20 -130us[ +796us] +/- 21ms
in host:
MS Name/IP address Stratum Poll Reach LastRx Last sample
========================================================================
^* 120.25.115.20 2 7 377 72 -470us[ -603us] +/- 18ms
^* 120.25.115.20 2 7 377 92 -470us[ -603us] +/- 18ms
^* 120.25.115.20 2 7 377 112 -470us[ -603us] +/- 18ms
^* 120.25.115.20 2 7 377 2 +872ns[-6808ns] +/- 17ms
^* 120.25.115.20 2 7 377 22 +872ns[-6808ns] +/- 17ms
^* 120.25.115.20 2 7 377 43 +872ns[-6808ns] +/- 17ms
^* 120.25.115.20 2 7 377 63 +872ns[-6808ns] +/- 17ms
^* 120.25.115.20 2 7 377 83 +872ns[-6808ns] +/- 17ms
^* 120.25.115.20 2 7 377 103 +872ns[-6808ns] +/- 17ms
^* 120.25.115.20 2 7 377 123 +872ns[-6808ns] +/- 17ms
The dns1.synet.edu.cn is the network reference clock for guest and
120.25.115.20 is the network reference clock for host. we can't get the
clock error between guest and host directly, but a roughly estimated value
will be in order of hundreds of us to ms.
with kvm ptp in guest:
chrony has been disabled in host to remove the disturb by network clock.
MS Name/IP address Stratum Poll Reach LastRx Last sample
========================================================================
* PHC0 0 3 377 8 -7ns[ +1ns] +/- 3ns
* PHC0 0 3 377 8 +1ns[ +16ns] +/- 3ns
* PHC0 0 3 377 6 -4ns[ -0ns] +/- 6ns
* PHC0 0 3 377 6 -8ns[ -12ns] +/- 5ns
* PHC0 0 3 377 5 +2ns[ +4ns] +/- 4ns
* PHC0 0 3 377 13 +2ns[ +4ns] +/- 4ns
* PHC0 0 3 377 12 -4ns[ -6ns] +/- 4ns
* PHC0 0 3 377 11 -8ns[ -11ns] +/- 6ns
* PHC0 0 3 377 10 -14ns[ -20ns] +/- 4ns
* PHC0 0 3 377 8 +4ns[ +5ns] +/- 4ns
The PHC0 is the ptp clock which choose the host clock as its source
clock. So we can see that the clock difference between host and guest
is in order of ns.
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-8-jianyong.wu@arm.com
|
|
Add clocksource id to the ARM generic counter so that it can be easily
identified from callers such as ptp_kvm.
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-6-jianyong.wu@arm.com
|
|
CNTKCTL_EL1.EVNTI
ARM virtual counter supports event stream, it can only trigger an event
when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes,
so the actual period of event stream is 2^(cntkctl_evnti + 1). For example,
when the trigger bit is 0, then virtual counter trigger an event for every
two cycles.
While we're at it, rework the way we compute the trigger bit position
by making it more obvious that when bits [n:n-1] are both set (with n
being the most significant bit), we pick bit (n + 1).
Fixes: 037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201204073126.6920-3-zhukeqian1@huawei.com
|
|
In commit 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter
to access stable counters"), we separate stable and normal count reader to omit
unnecessary overhead on systems that have no timer erratum.
However, in erratum_set_next_event_tval_generic(), count reader becomes normal
reader. This converts it to stable reader.
Fixes: 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201204073126.6920-2-zhukeqian1@huawei.com
|
|
ARM64_WORKAROUND_1418040
ARM64_WORKAROUND_1418040 requires that AArch32 EL0 accesses to
the virtual counter register are trapped and emulated by the kernel.
This makes the vdso pretty pointless, and in some cases livelock
prone.
Provide a workaround entry that limits the vdso to 64bit tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As we are about to disable the vdso for compat tasks in some circumstances,
let's allow a workaround descriptor to express exactly that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
|
|
The function acpi_gtdt_init() prints a message in case of
error. Remove the error message after testing if the function fails,
otherwise it is a duplicate message.
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200429153559.21189-1-zhengdejin5@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
|
|
Using an arch timer with a frequency of less than 1MHz can potentially
result in incorrect functionality in systems that assume a reasonable
rate of the arch timer of 1 to 50MHz, described as typical in the
architecture specification.
Therefore, warn if the arch timer rate is below 1MHz, which is
considered atypical and worth emphasizing.
Suggested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The arm_arch_timer requires VDSO_CLOCKMODE_ARCHTIMER to be defined to
compile correctly. On ARM the vDSO can be disabled and when this is the
case the compilation ends prematurely with an error:
$ make ARCH=arm multi_v7_defconfig
$ ./scripts/config -d VDSO
$ make
drivers/clocksource/arm_arch_timer.c:73:44: error:
‘VDSO_CLOCKMODE_ARCHTIMER’ undeclared here (not in a function)
static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_ARCHTIMER;
Make the usage of VDSO_CLOCKMODE_ARCHTIMER depend on the VDSO enablement
and initialize the vdso clockmode variable with VDSO_CLOCKMODE_NONE
otherwise.
[ tglx: Match changelog and patch content. ]
Fixes: 5e3c6a312a09 ("ARM/arm64: vdso: Use common vdso clock mode storage")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200224151552.57274-1-vincenzo.frascino@arm.com
|
|
Convert ARM/ARM64 to the generic VDSO clock mode storage. This needs to
happen in one go as they share the clocksource driver.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lkml.kernel.org/r/20200207124403.363235229@linutronix.de
|
|
so the hyper-v clocksource update can be applied.
|
|
Different mechanisms are used to test and set elf_hwcaps between ARM
and ARM64, this results in the use of ifdeferry in this file when
setting/testing for the EVTSTRM hwcap.
Let's improve readability by extracting this to an arch helper.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With v5.2-rc1, The ftrace functions_graph tracer locks up whenever it is
enabled on arm64.
Since commit 0ea415390cd3 ("clocksource/arm_arch_timer: Use
arch_timer_read_counter to access stable counters") a function pointer
is consistently used to read the counter instead of potentially
referencing an inlinable function.
The graph tracers relies on accessing the timer counters to compute the
time spent in functions which causes the lockup when attempting to trace
these code paths.
Annotate the arm arch timer counter accessors as notrace.
Fixes: 0ea415390cd3 ("clocksource/arm_arch_timer: Use
arch_timer_read_counter to access stable counters")
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via
sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user
handlers
- Non-critical fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
Documentation: Add ARM64 to kernel-parameters.rst
arm64/speculation: Support 'mitigations=' cmdline option
arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
arm64: enable generic CPU vulnerabilites support
arm64: add sysfs vulnerability show for speculative store bypass
arm64: Fix size of __early_cpu_boot_status
clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
clocksource/arm_arch_timer: Remove use of workaround static key
clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
clocksource/arm_arch_timer: Direcly assign set_next_event workaround
arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
ARM: vdso: Remove dependency with the arch_timer driver internals
arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
arm64: Add part number for Neoverse N1
arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
arm64: mm: Remove pte_unmap_nested()
arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
arm64: compat: Reduce address limit for 64K pages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into for-next/core
Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/arch_timer.h
|
|
counters
Instead of always going via arch_counter_get_cntvct_stable to access the
counter workaround, let's have arch_timer_read_counter point to the
right method.
For that, we need to track whether any CPU in the system has a
workaround for the counter. This is done by having an atomic variable
tracking this.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The use of a static key in a hotplug path has proved to be a real
nightmare, and makes it impossible to have scream-free lockdep
kernel.
Let's remove the static key altogether, and focus on something saner.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When a given timer is affected by an erratum and requires an
alternative implementation of set_next_event, we do a rather
complicated dance to detect and call the workaround on each
set_next_event call.
This is clearly idiotic, as we can perfectly detect whether
this CPU requires a workaround while setting up the clock event
device.
This only requires the CPU-specific detection to be done a bit
earlier, and we can then safely override the set_next_event pointer
if we have a workaround associated to that CPU.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by; Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
We currently deal with ARM64_ERRATUM_1188873 by always trapping EL0
accesses for both instruction sets. Although nothing wrong comes out
of that, people trying to squeeze the last drop of performance from
buggy HW find this over the top. Oh well.
Let's change the mitigation by flipping the counter enable bit
on return to userspace. Non-broken HW gets an extra branch on
the fast path, which is hopefully not the end of the world.
The arch timer workaround is also removed.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
As we will exhaust the first 32 bits of AT_HWCAP let's start
exposing AT_HWCAP2 to userspace to give us up to 64 caps.
Whilst it's possible to use the remaining 32 bits of AT_HWCAP, we
prefer to expand into AT_HWCAP2 in order to provide a consistent
view to userspace between ILP32 and LP64. However internal to the
kernel we prefer to continue to use the full space of elf_hwcap.
To reduce complexity and allow for future expansion, we now
represent hwcaps in the kernel as ordinals and use a
KERNEL_HWCAP_ prefix. This allows us to support automatic feature
based module loading for all our hwcaps.
We introduce cpu_set_feature to set hwcaps which complements the
existing cpu_have_feature helper. These helpers allow us to clean
up existing direct uses of elf_hwcap and reduce any future effort
required to move beyond 64 caps.
For convenience we also introduce cpu_{have,set}_named_feature which
makes use of the cpu_feature macro to allow providing a hwcap name
without a {KERNEL_}HWCAP_ prefix.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
[will: use const_ilog2() and tweak documentation]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
After this commit ded24019b6b6f(clocksource: arm_arch_timer: clean up
printk usage), the previous macro is redundant, so delete it.
And move the new macro to the previous position.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
|
|
The Allwinner A64 SoC is known[1] to have an unstable architectural
timer, which manifests itself most obviously in the time jumping forward
a multiple of 95 years[2][3]. This coincides with 2^56 cycles at a
timer frequency of 24 MHz, implying that the time went slightly backward
(and this was interpreted by the kernel as it jumping forward and
wrapping around past the epoch).
Investigation revealed instability in the low bits of CNTVCT at the
point a high bit rolls over. This leads to power-of-two cycle forward
and backward jumps. (Testing shows that forward jumps are about twice as
likely as backward jumps.) Since the counter value returns to normal
after an indeterminate read, each "jump" really consists of both a
forward and backward jump from the software perspective.
Unless the kernel is trapping CNTVCT reads, a userspace program is able
to read the register in a loop faster than it changes. A test program
running on all 4 CPU cores that reported jumps larger than 100 ms was
run for 13.6 hours and reported the following:
Count | Event
-------+---------------------------
9940 | jumped backward 699ms
268 | jumped backward 1398ms
1 | jumped backward 2097ms
16020 | jumped forward 175ms
6443 | jumped forward 699ms
2976 | jumped forward 1398ms
9 | jumped forward 356516ms
9 | jumped forward 357215ms
4 | jumped forward 714430ms
1 | jumped forward 3578440ms
This works out to a jump larger than 100 ms about every 5.5 seconds on
each CPU core.
The largest jump (almost an hour!) was the following sequence of reads:
0x0000007fffffffff → 0x00000093feffffff → 0x0000008000000000
Note that the middle bits don't necessarily all read as all zeroes or
all ones during the anomalous behavior; however the low 10 bits checked
by the function in this patch have never been observed with any other
value.
Also note that smaller jumps are much more common, with backward jumps
of 2048 (2^11) cycles observed over 400 times per second on each core.
(Of course, this is partially explained by lower bits rolling over more
frequently.) Any one of these could have caused the 95 year time skip.
Similar anomalies were observed while reading CNTPCT (after patching the
kernel to allow reads from userspace). However, the CNTPCT jumps are
much less frequent, and only small jumps were observed. The same program
as before (except now reading CNTPCT) observed after 72 hours:
Count | Event
-------+---------------------------
17 | jumped backward 699ms
52 | jumped forward 175ms
2831 | jumped forward 699ms
5 | jumped forward 1398ms
Further investigation showed that the instability in CNTPCT/CNTVCT also
affected the respective timer's TVAL register. The following values were
observed immediately after writing CNVT_TVAL to 0x10000000:
CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error
--------------------+------------+--------------------+-----------------
0x000000d4a2d8bfff | 0x10003fff | 0x000000d4b2d8bfff | +0x00004000
0x000000d4a2d94000 | 0x0fffffff | 0x000000d4b2d97fff | -0x00004000
0x000000d4a2d97fff | 0x10003fff | 0x000000d4b2d97fff | +0x00004000
0x000000d4a2d9c000 | 0x0fffffff | 0x000000d4b2d9ffff | -0x00004000
The pattern of errors in CNTV_TVAL seemed to depend on exactly which
value was written to it. For example, after writing 0x10101010:
CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error
--------------------+------------+--------------------+-----------------
0x000001ac3effffff | 0x1110100f | 0x000001ac4f10100f | +0x1000000
0x000001ac40000000 | 0x1010100f | 0x000001ac5110100f | -0x1000000
0x000001ac58ffffff | 0x1110100f | 0x000001ac6910100f | +0x1000000
0x000001ac66000000 | 0x1010100f | 0x000001ac7710100f | -0x1000000
0x000001ac6affffff | 0x1110100f | 0x000001ac7b10100f | +0x1000000
0x000001ac6e000000 | 0x1010100f | 0x000001ac7f10100f | -0x1000000
I was also twice able to reproduce the issue covered by Allwinner's
workaround[4], that writing to TVAL sometimes fails, and both CVAL and
TVAL are left with entirely bogus values. One was the following values:
CNTVCT | CNTV_TVAL | CNTV_CVAL
--------------------+------------+--------------------------------------
0x000000d4a2d6014c | 0x8fbd5721 | 0x000000d132935fff (615s in the past)
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
========================================================================
Because the CPU can read the CNTPCT/CNTVCT registers faster than they
change, performing two reads of the register and comparing the high bits
(like other workarounds) is not a workable solution. And because the
timer can jump both forward and backward, no pair of reads can
distinguish a good value from a bad one. The only way to guarantee a
good value from consecutive reads would be to read _three_ times, and
take the middle value only if the three values are 1) each unique and
2) increasing. This takes at minimum 3 counter cycles (125 ns), or more
if an anomaly is detected.
However, since there is a distinct pattern to the bad values, we can
optimize the common case (1022/1024 of the time) to a single read by
simply ignoring values that match the error pattern. This still takes no
more than 3 cycles in the worst case, and requires much less code. As an
additional safety check, we still limit the loop iteration to the number
of max-frequency (1.2 GHz) CPU cycles in three 24 MHz counter periods.
For the TVAL registers, the simple solution is to not use them. Instead,
read or write the CVAL and calculate the TVAL value in software.
Although the manufacturer is aware of at least part of the erratum[4],
there is no official name for it. For now, use the kernel-internal name
"UNKNOWN1".
[1]: https://github.com/armbian/build/commit/a08cd6fe7ae9
[2]: https://forum.armbian.com/topic/3458-a64-datetime-clock-issue/
[3]: https://irclog.whitequark.org/linux-sunxi/2018-01-26
[4]: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/drivers/clocksource/arm_arch_timer.c#L272
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
A host running in VHE mode gets the EL2 physical timer as its time
source (accessed using the EL1 sysreg accessors, which get re-directed
to the EL2 sysregs by VHE).
The EL1 physical timer remains unused by the host kernel, allowing us to
pass that on directly to a KVM guest and saves us from emulating this
timer for the guest on VHE systems.
Store the EL1 Physical Timer's IRQ number in
struct arch_timer_kvm_info on VHE systems to allow KVM to use it.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
|
|
When running on Cortex-A76, a timer access from an AArch32 EL0
task may end up with a corrupted value or register. The workaround for
this is to trap these accesses at EL1/EL2 and execute them there.
This only affects versions r0p0, r1p0 and r2p0 of the CPU.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently, arch_mem_timer cpumask is set to cpu_all_mask which should be
fine. However, cpu_possible_mask is more accurate and if there are other
clockevent source in the system which are set to cpu_possible_mask, then
having cpu_all_mask may result in issue.
E.g. on a platform with arm,sp804 timer with rating 300 and
cpu_possible_mask and this arch_mem_timer timer with rating 400 and
cpu_all_mask, tick_check_preferred may choose both preferred as the
cpumasks are not equal though they must be.
This issue was root caused incorrectly initially and a fix was merged as
commit 1332a9055801 ("tick: Prefer a lower rating device only if it's CPU
local device").
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/1531151136-18297-2-git-send-email-sudeep.holla@arm.com
|
|
Pull KVM updates from Radim Krčmář:
"First batch of KVM changes for 4.15
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
and after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups"
* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
KVM: s390: provide a capability for AIS state migration
KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
KVM: s390: abstract conversion between isc and enum irq_types
KVM: s390: vsie: use common code functions for pinning
KVM: s390: SIE considerations for AP Queue virtualization
KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
KVM: arm/arm64: fix the incompatible matching for external abort
KVM: arm/arm64: Unify 32bit fault injection
KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
KVM: arm/arm64: vgic-its: New helper functions to free the caches
KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
arm/arm64: KVM: Load the timer state when enabling the timer
KVM: arm/arm64: Rework kvm_timer_should_fire
KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
KVM: arm/arm64: Move phys_timer_emulate function
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The big highlight is support for the Scalable Vector Extension (SVE)
which required extensive ABI work to ensure we don't break existing
applications by blowing away their signal stack with the rather large
new vector context (<= 2 kbit per vector register). There's further
work to be done optimising things like exception return, but the ABI
is solid now.
Much of the line count comes from some new PMU drivers we have, but
they're pretty self-contained and I suspect we'll have more of them in
future.
Plenty of acronym soup here:
- initial support for the Scalable Vector Extension (SVE)
- improved handling for SError interrupts (required to handle RAS
events)
- enable GCC support for 128-bit integer types
- remove kernel text addresses from backtraces and register dumps
- use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- perf PMU driver for the Statistical Profiling Extension (SPE)
- perf PMU driver for Hisilicon's system PMUs
- misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
arm64: Make ARMV8_DEPRECATED depend on SYSCTL
arm64: Implement __lshrti3 library function
arm64: support __int128 on gcc 5+
arm64/sve: Add documentation
arm64/sve: Detect SVE and activate runtime support
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: Add sysctl to set the default vector length for new processes
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: ptrace and ELF coredump support
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Backend logic for setting the vector length
arm64/sve: Signal handling support
arm64/sve: Support vector length resetting for new processes
arm64/sve: Core task context handling
arm64/sve: Low-level CPU setup
...
|