Age | Commit message (Collapse) | Author |
|
There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
There's a KASAN warning in raid5_remove_disk when running the LVM
testsuite. We fix this warning by verifying that the "number" variable is
within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.
In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)
When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.
Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().
The out-of-bounds memory accesses was discovered using KASAN.
This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 85e123c27d5c ("dm mirror log: round up region bitmap size to
BITS_PER_LONG") introduced a regression on 64-bit architectures in the
lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation.
If the device is shrunk, we need to clear log bits beyond the end of the
device. The code clears bits up to a 32-bit boundary and then calculates
lc->sync_count by summing set bits up to a 64-bit boundary (the commit
changed that; previously, this boundary was 32-bit too). So, it was using
some non-zeroed bits in the calculation and this caused misbehavior.
Fix this regression by clearing bits up to BITS_PER_LONG boundary.
Fixes: 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG")
Cc: stable@vger.kernel.org
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO
accounting") removed using cloned bio when dm io splitting is needed.
Using bio_trim()+bio_inc_remaining() rather than bio_split()+bio_chain()
causes multiple dm_io instances to share the same original bio, and it
works fine if IOs are completed successfully.
But a regression was caused for the case when BLK_STS_DM_REQUEUE is
returned from any one of DM's cloned bios (whose dm_io share the same
orig_bio). In this BLK_STS_DM_REQUEUE case only the mapped subset of
the original bio for the current exact dm_io needs to be re-submitted.
However, since the original bio is shared among all dm_io instances,
the ->orig_bio actually only represents the last dm_io instance, so
requeue can't work as expected. Also when more than one dm_io is
requeued, the same original bio is requeued from all dm_io's
completion handler, then race is caused.
Fix this issue by still allocating one clone bio for completing io
only, then io accounting can rely on ->orig_bio being unmodified. This
is needed because the dm_io's sector_offset and sectors members are
recorded relative to an unmodified ->orig_bio.
In the future, we can go back to using bio_trim()+bio_inc_remaining()
for dm's io splitting but then delay needing a bio clone only when
handling BLK_STS_DM_REQUEUE, but that approach is a bit complicated
(so it needs a development cycle):
1) bio clone needs to be done in task context
2) a block interface for unwinding bio is required
Fixes: 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting")
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 5291984004edf ("dm: fix bio polling to handle possibile
BLK_STS_AGAIN") inadvertently introduced an early return from
dm_io_complete() without first queueing the bio to DM if BLK_STS_AGAIN
occurs and bio-polling is _not_ being used.
Fix this by only returning early from dm_io_complete() if the bio has
first been properly queued to DM. Otherwise, the bio will never finish
via bio_endio.
Fixes: 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- Quirks, quirks, quirks to work around buggy consumer grade
devices (Keith Bush, Ning Wang, Stefan Reiter, Rasheed Hsueh)
- Better kernel messages for devices that need quirking (Keith
Bush)
- Make a kernel message more useful (Thomas Weißschuh)
- MD pull request from Song, with a few fixes
- blk-mq sysfs locking fixes (Ming)
- BFQ stats fix (Bart)
- blk-mq offline queue fix (Bart)
- blk-mq flush request tag fix (Ming)
* tag 'block-5.19-2022-06-16' of git://git.kernel.dk/linux-block:
block/bfq: Enable I/O statistics
blk-mq: don't clear flush_rq from tags->rqs[]
blk-mq: avoid to touch q->elevator without any protection
blk-mq: protect q->elevator by ->sysfs_lock in blk_mq_elv_switch_none
block: Fix handling of offline queues in blk_mq_alloc_request_hctx()
md/raid5-ppl: Fix argument order in bio_alloc_bioset()
Revert "md: don't unregister sync_thread with reconfig_mutex held"
nvme-pci: disable write zeros support on UMIC and Samsung SSDs
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs
nvme-pci: sk hynix p31 has bogus namespace ids
nvme-pci: smi has bogus namespace ids
nvme-pci: phison e12 has bogus namespace ids
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S50
nvme-pci: add trouble shooting steps for timeouts
nvme: add bug report info for global duplicate id
nvme: add device name to warning in uuid_show()
|
|
The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.
Fix this bug by rounding up bitset_size to BITS_PER_LONG.
This bug was found by running the lvm2 testsuite with kasan.
Fixes: 29121bd0b00e ("[PATCH] dm mirror log: bitset_size fix")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Starting with the commit 63a225c9fd20, device mapper has an optimization
that it will take cheaper table lock (dm_get_live_table_fast instead of
dm_get_live_table) if the bio has REQ_NOWAIT. The bios with REQ_NOWAIT
must not block in the target request routine, if they did, we would be
blocking while holding rcu_read_lock, which is prohibited.
The targets that are suitable for REQ_NOWAIT optimization (and that don't
block in the map routine) have the flag DM_TARGET_NOWAIT set. Device
mapper will test if all the targets and all the devices in a table
support nowait (see the function dm_table_supports_nowait) and it will set
or clear the QUEUE_FLAG_NOWAIT flag on its request queue according to
this check.
There's a test in submit_bio_noacct: "if ((bio->bi_opf & REQ_NOWAIT) &&
!blk_queue_nowait(q)) goto not_supported" - this will make sure that
REQ_NOWAIT bios can't enter a request queue that doesn't support them.
This mechanism works to prevent REQ_NOWAIT bios from reaching dm targets
that don't support the REQ_NOWAIT flag (and that may block in the map
routine) - except that there is a small race condition:
submit_bio_noacct checks if the queue has the QUEUE_FLAG_NOWAIT without
holding any locks. Immediatelly after this check, the device mapper table
may be reloaded with a table that doesn't support REQ_NOWAIT (for example,
if we start moving the logical volume or if we activate a snapshot).
However the REQ_NOWAIT bio that already passed the check in
submit_bio_noacct would be sent to device mapper, where it could be
redirected to a dm target that doesn't support REQ_NOWAIT - the result is
sleeping while we hold rcu_read_lock.
In order to fix this race, we double-check if the target supports
REQ_NOWAIT while we hold the table lock (so that the table can't change
under us).
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
dm_put_live_table_bio is called from the end of dm_submit_bio.
However, at this point, the bio may be already finished and the caller
may have freed the bio. Consequently, dm_put_live_table_bio accesses
the stale "bio" pointer.
Fix this bug by loading the bi_opf value and passing it to
dm_get_live_table_bio and dm_put_live_table_bio instead of the bio.
This bug was found by running the lvm2 testsuite with kasan.
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
bio_alloc_bioset() takes a block device, number of vectors, the
OP flags, the GFP mask and the bio set. However when the prototype
was changed, the callisite in ppl_do_flush() had the OP flags and
the GFP flags reversed. This introduced some sparse error:
drivers/md/raid5-ppl.c:632:57: warning: incorrect type in argument 3
(different base types)
drivers/md/raid5-ppl.c:632:57: expected unsigned int opf
drivers/md/raid5-ppl.c:632:57: got restricted gfp_t [usertype]
drivers/md/raid5-ppl.c:633:61: warning: incorrect type in argument 4
(different base types)
drivers/md/raid5-ppl.c:633:61: expected restricted gfp_t [usertype]
gfp_mask
drivers/md/raid5-ppl.c:633:61: got unsigned long long
The sparse error introduction may not have been reported correctly by
0day due to other work that was cleaning up other sparse errors in this
area.
Fixes: 609be1066731 ("block: pass a block_device and opf to bio_alloc_bioset")
Cc: stable@vger.kernel.org # 5.18+
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
|
|
The 07reshape5intr test is broke because of below path.
md_reap_sync_thread
-> mddev_unlock
-> md_unregister_thread(&mddev->sync_thread)
And md_check_recovery is triggered by,
mddev_unlock -> md_wakeup_thread(mddev->thread)
then mddev->reshape_position is set to MaxSector in raid5_finish_reshape
since MD_RECOVERY_INTR is cleared in md_check_recovery, which means
feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's
reshape_position can't be updated accordingly.
Fixes: 8b48ec23cc51a ("md: don't unregister sync_thread with reconfig_mutex held")
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
|
|
After commit 82f6cdcc3676c ("dm: switch dm_io booleans over to proper
flags") dm_start_io_acct stopped atomically checking and setting
was_accounted, which turned into the DM_IO_ACCOUNTED flag. This opened
the possibility for a race where IO accounting is started twice for
duplicate bios. To remove the race, check the flag while holding the
io->lock.
Fixes: 82f6cdcc3676c ("dm: switch dm_io booleans over to proper flags")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
After the commit ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone"),
clone_endio() only calls dm_zone_endio() when DM targets remap the
clone bio's bdev to something other than the md->disk->part0 default.
However, if a DM target (e.g. dm-crypt) stacked ontop of a dm-zoned
does not remap the clone bio using bio_set_dev() then dm_zone_endio()
is not called at completion of the bios and zone locks are not
properly unlocked. This triggers a hang, in dm_zone_map_bio(), when
blktests block/004 is run for dm-crypt on zoned block devices. To
avoid the hang, simply remove the clone_endio() check that verifies
the target remapped the clone bio to a device other than the default.
Fixes: ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The use of bioset_init_from_src mean that the pre-allocated pools weren't
used for anything except parameter passing, and the integrity pool
creation got completely lost for the actual live mapped_device. Fix that
by assigning the actual preallocated dm_md_mempools to the mapped_device
and using that for I/O instead of creating new mempools.
Fixes: 2a2a4c510b76 ("dm: use bioset_init_from_src() to copy bio_set")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Pull more block driver updates from Jens Axboe:
"A collection of stragglers that were late on sending in their changes
and just followup fixes.
- NVMe fixes pull request via Christoph:
- set controller enable bit in a separate write (Niklas Cassel)
- disable namespace identifiers for the MAXIO MAP1001 (Christoph)
- fix a comment typo (Julia Lawall)"
- MD fixes pull request via Song:
- Remove uses of bdevname (Christoph Hellwig)
- Bug fixes (Guoqing Jiang, and Xiao Ni)
- bcache fixes series (Coly)
- null_blk zoned write fix (Damien)
- nbd fixes (Yu, Zhang)
- Fix for loop partition scanning (Christoph)"
* tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits)
block: null_blk: Fix null_zone_write()
nvmet: fix typo in comment
nvme: set controller enable bit in a separate write
nvme-pci: disable namespace identifiers for the MAXIO MAP1001
bcache: avoid unnecessary soft lockup in kworker update_writeback_rate()
nbd: use pr_err to output error message
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
nbd: fix io hung while disconnecting device
nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed
nbd: fix race between nbd_alloc_config() and module removal
nbd: call genl_unregister_family() first in nbd_cleanup()
md: bcache: check the return value of kzalloc() in detached_dev_do_request()
bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init()
block, loop: support partitions without scanning
bcache: avoid journal no-space deadlock by reserving 1 journal bucket
bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()
bcache: improve multithreaded bch_sectors_dirty_init()
bcache: improve multithreaded bch_btree_check()
md: fix double free of io_acct_set bioset
md: Don't set mddev private to NULL in raid0 pers->free
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core's dm_table_supports_poll to return false if target has no
data devices.
- Fix DM verity target so that it cannot be switched to a different DM
target type (e.g. dm-linear) via DM table reload.
* tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: set DM_TARGET_IMMUTABLE feature flag
dm table: fix dm_table_supports_poll to return false if no data devices
|
|
The device-mapper framework provides a mechanism to mark targets as
immutable (and hence fail table reloads that try to change the target
type). Add the DM_TARGET_IMMUTABLE flag to the dm-verity target's
feature flags to prevent switching the verity target with a different
target type.
Fixes: a4ffc152198e ("dm: add verity target")
Cc: stable@vger.kernel.org
Signed-off-by: Sarthak Kukreti <sarthakkukreti@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
It was reported that the "generic/250" test in xfstests (which uses
the dm-error target) demonstrates a regression where the kernel
crashes in bioset_exit().
Since commit cfc97abcbe0b ("dm: conditionally enable
BIOSET_PERCPU_CACHE for dm_io bioset") the bioset_init() for the dm_io
bioset will setup the bioset's per-cpu alloc cache if all devices have
QUEUE_FLAG_POLL set.
But there was an bug where a target that doesn't have any data devices
(and that doesn't even set the .iterate_devices dm target callback)
will incorrectly return true from dm_table_supports_poll().
Fix this by updating dm_table_supports_poll() to follow dm-table.c's
well-worn pattern for testing that _all_ targets in a DM table do in
fact have underlying devices that set QUEUE_FLAG_POLL.
NOTE: An additional block fix is still needed so that
bio_alloc_cache_destroy() clears the bioset's ->cache member.
Otherwise, a DM device's table reload that transitions the DM device's
bioset from using a per-cpu alloc cache to _not_ using one will result
in bioset_exit() crashing in bio_alloc_cache_destroy() because dm's
dm_io bioset ("io_bs") was left with a stale ->cache member.
Fixes: cfc97abcbe0b ("dm: conditionally enable BIOSET_PERCPU_CACHE for dm_io bioset")
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The kworker routine update_writeback_rate() is schedued to update the
writeback rate in every 5 seconds by default. Before calling
__update_writeback_rate() to do real job, semaphore dc->writeback_lock
should be held by the kworker routine.
At the same time, bcache writeback thread routine bch_writeback_thread()
also needs to hold dc->writeback_lock before flushing dirty data back
into the backing device. If the dirty data set is large, it might be
very long time for bch_writeback_thread() to scan all dirty buckets and
releases dc->writeback_lock. In such case update_writeback_rate() can be
starved for long enough time so that kernel reports a soft lockup warn-
ing started like:
watchdog: BUG: soft lockup - CPU#246 stuck for 23s! [kworker/246:31:179713]
Such soft lockup condition is unnecessary, because after the writeback
thread finishes its job and releases dc->writeback_lock, the kworker
update_writeback_rate() may continue to work and everything is fine
indeed.
This patch avoids the unnecessary soft lockup by the following method,
- Add new member to struct cached_dev
- dc->rate_update_retry (0 by default)
- In update_writeback_rate() call down_read_trylock(&dc->writeback_lock)
firstly, if it fails then lock contention happens.
- If dc->rate_update_retry <= BCH_WBRATE_UPDATE_MAX_SKIPS (15), doesn't
acquire the lock and reschedules the kworker for next try.
- If dc->rate_update_retry > BCH_WBRATE_UPDATE_MAX_SKIPS, no retry
anymore and call down_read(&dc->writeback_lock) to wait for the lock.
By the above method, at worst case update_writeback_rate() may retry for
1+ minutes before blocking on dc->writeback_lock by calling down_read().
For a 4TB cache device with 1TB dirty data, 90%+ of the unnecessary soft
lockup warning message can be avoided.
When retrying to acquire dc->writeback_lock in update_writeback_rate(),
of course the writeback rate cannot be updated. It is fair, because when
the kworker is blocked on the lock contention of dc->writeback_lock, the
writeback rate cannot be updated neither.
This change follows Jens Axboe's suggestion to a more clear and simple
version.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220528124550.32834-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
|
|
The function kzalloc() in detached_dev_do_request() can fail, so its
return value should be checked.
Fixes: bc082a55d25c ("bcache: fix inaccurate io state for detached bcache devices")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220527152818.27545-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bch_sectors_dirty_init()
The local variables check_state (in bch_btree_check()) and state (in
bch_sectors_dirty_init()) should be fully filled by 0, because before
allocating them on stack, they were dynamically allocated by kzalloc().
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220527152818.27545-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Enable DM core bioset's per-cpu bio cache if QUEUE_FLAG_POLL set.
This change improves DM's hipri bio polling (REQ_POLLED) performance
by 7 - 20% depending on the system.
- Update DM core to use jump_labels to further reduce cost of unlikely
branches for zoned block devices, dm-stats and swap_bios throttling.
- Various DM core changes to reduce bio-based DM overhead and simplify
IO accounting.
- Fundamental DM core improvements to dm_io reference counting and the
elimination of using bio_split()+bio_chain() -- instead DM's
bio-based IO accounting is updated to account that a split occurred.
- Improve DM core's abnormal bio processing to do less work.
- Improve DM core's hipri polling support to use a single list rather
than an hlist.
- Update DM core to pass NULL bdev to bio_alloc_clone() so that
initialization that isn't useful for DM can be elided.
- Add cond_resched to DM stats' various loops that loop over all
entries.
- Fix incorrect error code return from DM integrity's constructor.
- Make DM crypt's printing of the key constant-time.
- Update bio-based DM multipath to provide high-resolution timer to the
Historical Service Time (HST) path selector.
* tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm: pass NULL bdev to bio_alloc_clone
dm cache metadata: remove unnecessary variable in __dump_mapping
dm mpath: provide high-resolution timer to HST for bio-based
dm crypt: make printing of the key constant-time
dm integrity: fix error code in dm_integrity_ctr()
dm stats: add cond_resched when looping over entries
dm: improve abnormal bio processing
dm: simplify bio-based IO accounting further
dm: put all polled dm_io instances into a single list
dm: improve dm_io reference counting
dm: don't grab target io reference in dm_zone_map_bio
dm: improve bio splitting and associated IO accounting
dm: switch to bdev based IO accounting interfaces
dm: pass dm_io instance to dm_io_acct directly
dm: don't pass bio to __dm_start_io_acct and dm_end_io_acct
dm: use bio_sectors in dm_aceept_partial_bio
dm: simplify basic targets
dm: conditionally enable branching for less used features
dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio
dm: move hot dm_io members to same cacheline as dm_target_io
...
|
|
The journal no-space deadlock was reported time to time. Such deadlock
can happen in the following situation.
When all journal buckets are fully filled by active jset with heavy
write I/O load, the cache set registration (after a reboot) will load
all active jsets and inserting them into the btree again (which is
called journal replay). If a journaled bkey is inserted into a btree
node and results btree node split, new journal request might be
triggered. For example, the btree grows one more level after the node
split, then the root node record in cache device super block will be
upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no
space in journal buckets, the journal replay has to wait for new journal
bucket to be reclaimed after at least one journal bucket replayed. This
is one example that how the journal no-space deadlock happens.
The solution to avoid the deadlock is to reserve 1 journal bucket in
run time, and only permit the reserved journal bucket to be used during
cache set registration procedure for things like journal replay. Then
the journal space will never be fully filled, there is no chance for
journal no-space deadlock to happen anymore.
This patch adds a new member "bool do_reserve" in struct journal, it is
inititalized to 0 (false) when struct journal is allocated, and set to
1 (true) by bch_journal_space_reserve() when all initialization done in
run_cache_set(). In the run time when journal_reclaim() tries to
allocate a new journal bucket, free_journal_buckets() is called to check
whether there are enough free journal buckets to use. If there is only
1 free journal bucket and journal->do_reserve is 1 (true), the last
bucket is reserved and free_journal_buckets() will return 0 to indicate
no free journal bucket. Then journal_reclaim() will give up, and try
next time to see whetheer there is free journal bucket to allocate. By
this method, there is always 1 jouranl bucket reserved in run time.
During the cache set registration, journal->do_reserve is 0 (false), so
the reserved journal bucket can be used to avoid the no-space deadlock.
Reported-by: Nikhil Kshirsagar <nkshirsagar@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After making bch_sectors_dirty_init() being multithreaded, the existing
incremental dirty sector counting in bch_root_node_dirty_init() doesn't
release btree occupation after iterating 500000 (INIT_KEYS_EACH_TIME)
bkeys. Because a read lock is added on btree root node to prevent the
btree to be split during the dirty sectors counting, other I/O requester
has no chance to gain the write lock even restart bcache_btree().
That is to say, the incremental dirty sectors counting is incompatible
to the multhreaded bch_sectors_dirty_init(). We have to choose one and
drop another one.
In my testing, with 512 bytes random writes, I generate 1.2T dirty data
and a btree with 400K nodes. With single thread and incremental dirty
sectors counting, it takes 30+ minites to register the backing device.
And with multithreaded dirty sectors counting, the backing device
registration can be accomplished within 2 minutes.
The 30+ minutes V.S. 2- minutes difference makes me decide to keep
multithreaded bch_sectors_dirty_init() and drop the incremental dirty
sectors counting. This is what this patch does.
But INIT_KEYS_EACH_TIME is kept, in sectors_dirty_init_fn() the CPU
will be released by cond_resched() after every INIT_KEYS_EACH_TIME keys
iterated. This is to avoid the watchdog reports a bogus soft lockup
warning.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be
multithreaded") makes bch_sectors_dirty_init() to be much faster
when counting dirty sectors by iterating all dirty keys in the btree.
But it isn't in ideal shape yet, still can be improved.
This patch does the following changes to improve current parallel dirty
keys iteration on the btree,
- Add read lock to root node when multiple threads iterating the btree,
to prevent the root node gets split by I/Os from other registered
bcache devices.
- Remove local variable "char name[32]" and generate kernel thread name
string directly when calling kthread_run().
- Allocate "struct bch_dirty_init_state state" directly on stack and
avoid the unnecessary dynamic memory allocation for it.
- Decrease BCH_DIRTY_INIT_THRD_MAX from 64 to 12 which is enough indeed.
- Increase &state->started to count created kernel thread after it
succeeds to create.
- When wait for all dirty key counting threads to finish, use
wait_event() to replace wait_event_interruptible().
With the above changes, the code is more clear, and some potential error
conditions are avoided.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 8e7102273f59 ("bcache: make bch_btree_check() to be
multithreaded") makes bch_btree_check() to be much faster when checking
all btree nodes during cache device registration. But it isn't in ideal
shap yet, still can be improved.
This patch does the following thing to improve current parallel btree
nodes check by multiple threads in bch_btree_check(),
- Add read lock to root node while checking all the btree nodes with
multiple threads. Although currently it is not mandatory but it is
good to have a read lock in code logic.
- Remove local variable 'char name[32]', and generate kernel thread name
string directly when calling kthread_run().
- Allocate local variable "struct btree_check_state check_state" on the
stack and avoid unnecessary dynamic memory allocation for it.
- Reduce BCH_BTR_CHKTHREAD_MAX from 64 to 12 which is enough indeed.
- Increase check_state->started to count created kernel thread after it
succeeds to create.
- When wait for all checking kernel threads to finish, use wait_event()
to replace wait_event_interruptible().
With this change, the code is more clear, and some potential error
conditions are avoided.
Fixes: 8e7102273f59 ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
|
|
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
|
|
Now io_acct_set is alloc and free in personality. Remove the codes that
free io_acct_set in md_free and md_stop.
Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
In normal stop process, it does like this:
do_md_stop
|
__md_stop (pers->free(); mddev->private=NULL)
|
md_free (free mddev)
__md_stop sets mddev->private to NULL after pers->free. The raid device
will be stopped and mddev memory is free. But in reshape, it doesn't
free the mddev and mddev will still be used in new raid.
In reshape, it first sets mddev->private to new_pers and then runs
old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free.
The new raid can't work anymore. It will panic when dereference
mddev->private because of NULL pointer dereference.
It can panic like this:
[63010.814972] kernel BUG at drivers/md/raid10.c:928!
[63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1
[63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020
[63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10]
[63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246
[63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000
[63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800
[63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000
[63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200
[63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003
[63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000
[63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0
[63010.927363] Call Trace:
[63010.929822] ? bio_reset+0xe/0x40
[63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10]
[63010.938629] raid10_sync_request+0x756/0x1610 [raid10]
[63010.943770] md_do_sync.cold+0x3e4/0x94c
[63010.947698] md_thread+0xab/0x160
[63010.951024] ? md_write_inc+0x50/0x50
[63010.954688] kthread+0x149/0x170
[63010.957923] ? set_kthread_struct+0x40/0x40
[63010.962107] ret_from_fork+0x22/0x30
Removing the code that sets mddev->private to NULL in raid0 can fix
problem.
Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Reported-by: Fine Fan <ffan@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Use the %pg format specifier to save on stack consumption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Generally, the md_unregister_thread is called with reconfig_mutex, but
raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread,
so md_unregister_thread can be called simulitaneously from two call sites
in theory.
Then after previous commit which remove the protection of reconfig_mutex
for md_unregister_thread completely, the potential issue could be worse
than before.
Let's take pers_lock at the beginning of function to ensure reentrancy.
Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Unregister sync_thread doesn't need to hold reconfig_mutex since it
doesn't reconfigure array.
And it could cause deadlock problem for raid5 as follows:
1. process A tried to reap sync thread with reconfig_mutex held after echo
idle to sync_action.
2. raid5 sync thread was blocked if there were too many active stripes.
3. SB_CHANGE_PENDING was set (because of write IO comes from upper layer)
which causes the number of active stripes can't be decreased.
4. SB_CHANGE_PENDING can't be cleared since md_check_recovery was not able
to hold reconfig_mutex.
More details in the link:
https://lore.kernel.org/linux-raid/5ed54ffc-ce82-bf66-4eff-390cb23bc1ac@molgen.mpg.de/T/#t
And add one parameter to md_reap_sync_thread since it could be called by
dm-raid which doesn't hold reconfig_mutex.
Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Introduce dax_recovery_write() operation. The function is used to
recover a dax range that contains poison. Typical use case is when
a user process receives a SIGBUS with si_code BUS_MCEERR_AR
indicating poison(s) in a dax range, in response, the user process
issues a pwrite() to the page-aligned dax range, thus clears the
poison and puts valid data in the range.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/20220422224508.440670-6-jane.chu@oracle.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Most DM targets will remap the clone bio passed to their ->map
function using bio_set_bdev(). So this change to pass NULL bdev to
bio_alloc_clone avoids clone-time work that sets up resources for a
bdev association that will not be used in practice (e.g. clone issued
to underlying device will not use DM device's blk-cgroups resources).
But clone->bi_bdev is still initialized following bio_alloc_clone to
preserve DM target expectations that clone->bi_bdev will be set.
Follow-up work is needed to audit DM targets to remove accesses to a
clone->bi_bdev that the target didn't initialize with bio_set_dev().
Depends-on: 7ecc56c62b27 ("block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Fix the following coccicheck warning:
drivers/md/dm-cache-metadata.c:1512:5-6: Unneeded variable: "r".
Return "0" on line 1520.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The precision loss of reading IO start_time with jiffies_to_nsecs
instead of using a high resolution timer degrades HST path prediction
for BIO-based mpath on high load workloads.
Below, I show the utilization percentage of a 10 disk multipath with
asymmetrical disk access cost, while being exercised by a randwrite FIO
benchmark with high submission queue depth (depth=64). It is possible
to see that the HST path selection degrades heavily for high-iops in
BIO-mpath, underutilizing the slower paths way beyond expected. This
seems to be caused by the start_time truncation, which makes some IO to
seem much slower than it actually is. In this scenario ST outperforms
HST for bio-mpath, but not for mq-mpath, which already uses ktime_get_ns().
The third column shows utilization with this patch applied. It is easy
to see that now HST prediction is much closer to the ideal distribution
(calculated considering the real cost of each path).
| | ST | HST (orig) | HST(ktime) | Best |
| sdd | 0.17 | 0.20 | 0.17 | 0.18 |
| sde | 0.17 | 0.20 | 0.17 | 0.18 |
| sdf | 0.17 | 0.20 | 0.17 | 0.18 |
| sdg | 0.06 | 0.00 | 0.06 | 0.04 |
| sdh | 0.03 | 0.00 | 0.03 | 0.02 |
| sdi | 0.03 | 0.00 | 0.03 | 0.02 |
| sdj | 0.02 | 0.00 | 0.01 | 0.01 |
| sdk | 0.02 | 0.00 | 0.01 | 0.01 |
| sdl | 0.17 | 0.20 | 0.17 | 0.18 |
| sdm | 0.17 | 0.20 | 0.17 | 0.18 |
This issue was originally discussed [1] when we first merged HST, and
this patch was left as a low hanging fruit to be solved later.
Regarding the implementation, as suggested by Mike in that mail thread,
in order to avoid the overhead of ktime_get_ns for other selectors, this
patch adds a flag for the selector code to request the high-resolution
timer.
I tested this using the same benchmark used in the original HST submission.
Full test and benchmark scripts are available here:
https://people.collabora.com/~krisman/HST-BIO-MPATH/
[1] https://lore.kernel.org/lkml/85tv0am9de.fsf@collabora.com/T/
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
[snitzer: cleaned up various implementation details]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The device mapper dm-crypt target is using scnprintf("%02x", cc->key[i]) to
report the current key to userspace. However, this is not a constant-time
operation and it may leak information about the key via timing, via cache
access patterns or via the branch predictor.
Change dm-crypt's key printing to use "%c" instead of "%02x". Also
introduce hex2asc() that carefully avoids any branching or memory
accesses when converting a number in the range 0 ... 15 to an ascii
character.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The "r" variable shadows an earlier "r" that has function scope. It
means that we accidentally return success instead of an error code.
Smatch has a warning for this:
drivers/md/dm-integrity.c:4503 dm_integrity_ctr()
warn: missing error code 'r'
Fixes: 7eada909bfd7 ("dm: add integrity target")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
dm-stats can be used with a very large number of entries (it is only
limited by 1/4 of total system memory), so add rescheduling points to
the loops that iterate over the entries.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Read/write/flush are the most common operations, optimize switch in
is_abnormal_io() for those cases. Follows same pattern established in
block perf-wip commit ("block: optimise blk_may_split for normal rw")
Also, push is_abnormal_io() check and blk_queue_split() down from
dm_submit_bio() to dm_split_and_process_bio() and set new
'is_abnormal_io' flag in clone_info. Optimize __split_and_process_bio
and __process_abnormal_io by leveraging ci.is_abnormal_io flag.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Now that io splitting is recorded prior to, or during, ->map IO
accounting can happen immediately rather than defer until after
bio splitting in dm_split_and_process_bio().
Remove the DM_IO_START_ACCT flag and also remove dm_io's map_task
member because there is no longer any need to wait for splitting to
occur before accounting.
Also move dm_io struct's 'flags' member to consolidate struct holes.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Now that bio_split() isn't used by DM's bio splitting, it is a bit
overkill to link dm_io into an hlist given there is only single dm_io
in the list.
Convert to using a single list for holding all dm_io instances
associated with this bio.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Currently each dm_io's reference counter is grabbed before calling
__map_bio(), this way isn't efficient since we can move this grabbing
to initialization time inside alloc_io().
Meantime it becomes typical async io reference counter model: one is
for submission side, the other is for completion side, and the io won't
be completed until both sides are done.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
dm_zone_map_bio() is only called from __map_bio in which the io's
reference is grabbed already, and the reference won't be released
until the bio is submitted, so not necessary to do it dm_zone_map_bio
any more.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The current DM code (ab)uses late assignment of dm_io->orig_bio (after
__map_bio() returns and any bio splitting is complete) to indicate the
FS bio has been processed and can be accounted. This results in
awkward waiting until ->orig_bio is set in dm_submit_bio_remap().
Also the bio splitting was implemented using bio_split()+bio_chain()
-- a well-worn pattern but it requires bio cloning purely for the
benefit of more natural IO accounting. The bio_split() result was
stored in ->orig_bio to represent the mapped part of the original FS
bio.
DM has switched to the bdev based IO accounting interface. DM's IO
accounting can be implemented in terms of the original FS bio (now
stored early in ->orig_bio) via access to its sectors/bio_op. And
if/when splitting is needed, set a new DM_IO_WAS_SPLIT flag and use
new dm_io fields of .sector_offset & .sectors to allow IO accounting
for split bios _without_ needing to clone a new bio to store in
->orig_bio.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|