| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix integer overflow in new mobiveil driver (Dan Carpenter)
- Fix race during NVMe removal/rescan (Hari Vyas)
* tag 'pci-v4.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix is_added/is_busmaster race condition
PCI: mobiveil: Avoid integer overflow in IB_WIN_SIZE
|
|
When a PCI device is detected, pdev->is_added is set to 1 and proc and
sysfs entries are created.
When the device is removed, pdev->is_added is checked for one and then
device is detached with clearing of proc and sys entries and at end,
pdev->is_added is set to 0.
is_added and is_busmaster are bit fields in pci_dev structure sharing same
memory location.
A strange issue was observed with multiple removal and rescan of a PCIe
NVMe device using sysfs commands where is_added flag was observed as zero
instead of one while removing device and proc,sys entries are not cleared.
This causes issue in later device addition with warning message
"proc_dir_entry" already registered.
Debugging revealed a race condition between the PCI core setting the
is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue
setting the is_busmaster bit in pci_set_master(). As these fields are not
handled atomically, that clears the is_added bit.
Move the is_added bit to a separate private flag variable and use atomic
functions to set and retrieve the device addition state. This avoids the
race because is_added no longer shares a memory location with is_busmaster.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283
Signed-off-by: Hari Vyas <hari.vyas@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
IB_WIN_SIZE is larger than INT_MAX so we need to cast it to u64.
Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Fix a use-after-free error in fatal error recovery (Thomas Tai)"
* tag 'pci-v4.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()
|
|
When an fatal error is received by a non-bridge device, the device is
removed, and pci_stop_and_remove_bus_device() deallocates the device
structure. The freed device structure is used by subsequent code to send
uevents and print messages.
Hold a reference on the device until we're finished using it. This is not
an ideal fix because pcie_do_fatal_recovery() should not use the device at
all after removing it, but that's too big a project for right now.
Fixes: 7e9084b36740 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
[bhelgaas: changelog, reduce get/put coverage]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix crashes that happen when PHY drivers are left disabled in the V3
Semiconductor, MediaTek, Faraday, Aardvark, DesignWare, Versatile,
and X-Gene host controller drivers (Sergei Shtylyov)
- Fix a NULL pointer dereference in the endpoint library configfs
support (Kishon Vijay Abraham I)
- Fix a race condition in Hyper-V IRQ handling (Dexuan Cui)
* tag 'pci-v4.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: v3-semi: Fix I/O space page leak
PCI: mediatek: Fix I/O space page leak
PCI: faraday: Fix I/O space page leak
PCI: aardvark: Fix I/O space page leak
PCI: designware: Fix I/O space page leak
PCI: versatile: Fix I/O space page leak
PCI: xgene: Fix I/O space page leak
PCI: OF: Fix I/O space page leak
PCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled
PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg()
|
|
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The V3 Semiconductor PCI driver has the same issue.
Replace devm_pci_remap_iospace() with its devm_ managed version to fix
the bug.
Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The MediaTek PCIe driver has the same issue.
Replace devm_pci_remap_iospace() with its devm_ managed counterpart
to fix the bug.
Fixes: 637cfacae96f ("PCI: mediatek: Add MediaTek PCIe host controller support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When testing the R-Car PCIe driver on the Condor board, if
the PCIe PHY driver was left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The Faraday PCI driver has the same issue. Replace pci_remap_iospace()
with its devm_ managed version to fix the bug.
Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The Aardvark PCI controller driver has the same issue.
Replace pci_remap_iospace() with its devm_ managed version to fix the bug.
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver is left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The DesignWare PCIe controller driver has the same issue.
Replace devm_pci_remap_iospace() with a devm_ managed version to fix the
bug.
Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
|
|
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The Versatile PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version to fix the bug.
Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The X-Gene PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version so that the
pages get unmapped automagically on any probe failure.
Fixes: 5f6b6ccdbe1c ("PCI: xgene: Add APM X-Gene PCIe driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
Introduce the devm_pci_remap_iospace() managed API and replace the
pci_remap_iospace() call with it to fix the bug.
Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: split commit/updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
commit ef1433f717a2 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry") while adding configfs entry for each
pci_epf_device_id table entry introduced a NULL pointer dereference error
when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled.
Fix it here.
Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
uses local_bh_disable()/enable(), because hv_pci_onchannelcallback() can
also run in tasklet context as the channel event callback, so bottom halves
should be disabled to prevent a race condition.
With CONFIG_PROVE_LOCKING=y in the recent mainline, or old kernels that
don't have commit f71b74bca637 ("irq/softirqs: Use lockdep to assert IRQs
are disabled/enabled"), when the upper layer IRQ code calls
hv_compose_msi_msg() with local IRQs disabled, we'll see a warning at the
beginning of __local_bh_enable_ip():
IRQs not enabled as expected
WARNING: CPU: 0 PID: 408 at kernel/softirq.c:162 __local_bh_enable_ip
The warning exposes an issue in de0aa7b2f97d: local_bh_enable() can
potentially call do_softirq(), which is not supposed to run when local IRQs
are disabled. Let's fix this by using local_irq_save()/restore() instead.
Note: hv_pci_onchannelcallback() is not a hot path because it's only called
when the PCI device is hot added and removed, which is infrequent.
Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a use-after-free in the endpoint code (Dan Carpenter)
- Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven)
- Fix an nfp regression caused by a change in how we limit the number
of VFs we can enable (Jakub Kicinski)
- Fix failure path cleanup issues in the new R-Car gen3 PHY support
(Marek Vasut)
- Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc
Guire)
* tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
nfp: stop limiting VFs to 0
PCI/IOV: Reset total_VFs limit after detaching PF driver
PCI: faraday: Add missing of_node_put()
PCI: xilinx-nwl: Add missing of_node_put()
PCI: xilinx: Add missing of_node_put()
PCI: endpoint: Use after free in pci_epf_unregister_driver()
PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
PCI: rcar: Clean up PHY init on failure
PCI: rcar: Shut the PHY down in failpath
|
|
Merge a PCI power management regression fix.
* pm-pci:
PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
|
|
It is reported that commit c62ec4610c40 (PM / core: Fix direct_complete
handling for devices with no callbacks) introduced a system suspend
regression on Samsung 305V4A by allowing a PCI bridge (not a PCIe
port) to stay in D3 over suspend-to-RAM, which is a side effect of
setting power.direct_complete for the children of that bridge that
have no PM callbacks.
On the majority of systems PCI bridges are not allowed to be
runtime-suspended (the power/control sysfs attribute is set to "on"
for them by default), but user space can change that setting and if
it does so and a given bridge has no children with PM callbacks, the
direct_complete optimization will be applied to it and it will stay
in suspend over system suspend. Apparently, that confuses the
platform firmware on the affected machine and that may very well
happen elsewhere, so avoid the direct_complete optimization for
PCI bridges with no drivers (if there is a driver, it should take
care of the PM handling) on suspend-to-RAM altogether (that should
not matter for suspend-to-idle as platform firmware is not involved
in it).
Fixes: c62ec4610c40 (PM / core: Fix direct_complete handling for devices with no callbacks)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199941
Reported-by: n0000b.n000b@gmail.com
Tested-by: n0000b.n000b@gmail.com
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The TotalVFs register in the SR-IOV capability is the hardware limit on the
number of VFs. A PF driver can limit the number of VFs further with
pci_sriov_set_totalvfs(). When the PF driver is removed, reset any VF
limit that was imposed by the driver because that limit may not apply to
other drivers.
Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions", and the nfp driver used that to remove the VF limit when the
driver unloads.
8d85a7a4f2c9 broke that because instead of removing the VF limit,
pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that
limit persists even if another driver is loaded.
We could fix that by making the nfp driver reset the limit when it unloads,
but it seems more robust to do it in the PCI core instead of relying on the
driver.
The regression scenario is:
nfp_pci_probe (driver 1)
...
nfp_pci_remove
pci_sriov_set_totalvfs(pf->pdev, 0) # limits VFs to 0
...
nfp_pci_probe (driver 2)
nfp_rtsym_read_le("nfd_vf_cfg_max_vfs")
# no VF limit from firmware
Now driver 2 is broken because the VF limit is still 0 from driver 1.
Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog, rename functions]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented here in the error
path and after the last usage.
Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The call to of_get_next_child() returns a node pointer with
refcount incremented thus it must be explicitly decremented
here after the last usage.
Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The call to of_get_next_child() returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.
Fixes: 8961def56845 ("PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
[lorenzo.pieralisi@arm.com: reworked commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
We need to use list_for_each_entry_safe() because the
pci_ep_cfs_remove_epf_group() function frees "group".
Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
PCIE_DW_PLAT_HOST does not have any platform dependency, so it should
not default to yes.
Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
|
|
If the Gen3 PHY fails to power up, the code does not undo the
initialization caused by phy_init(). Add the missing failure
handling to the rcar_pcie_phy_init_gen3() function.
Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
|
|
If anything fails past phy_init_fn() and the system is a Gen3 with
a PHY, the PHY will be left on and inited. This is caused by the
phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3()
function, which starts the PHY, yet has no counterpart in the failpath.
Add that counterpart.
Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
|
|
Commit 51bc085d6454 ("PCI: Improve host drivers compile test coverage")
added configuration options to allow PCI host controller drivers to be
compile tested on all architectures.
Some host controller drivers (eg PCIE_ALTERA) config entries select the
PCI_DOMAINS config option to enable PCI domains management in the kernel.
Now that host controller drivers can be compiled on all architectures, this
triggers build regressions on arches that do not implement the PCI_DOMAINS
required API (ie pci_domain_nr()):
drivers/ata/pata_ali.c: In function 'ali_init_chipset':
drivers/ata/pata_ali.c:469:38: error: implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?
Furthemore, some software configurations (ie Jailhouse) require a
PCI_DOMAINS enabled kernel to configure multiple host controllers without
having an explicit dependency on the ARM platform on which they run.
Make PCI_DOMAINS a visible configuration option on ARM so that software
configurations that need it can manually select it and move the PCI_DOMAINS
selection from PCI controllers configuration file to ARM sub-arch config
entries that currently require it, fixing the issue.
Fixes: 51bc085d6454 ("PCI: Improve host drivers compile test coverage")
Link: https://lkml.kernel.org/r/20180612170229.GA10141@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
|
|
The endpoint library must be initialized before its users, which are in
drivers/pci/controllers. The endpoint initialization currently depends on
link order.
This corrects a kernel crash when loading the Cadence EP driver, since it
calls devm_pci_epc_create() and this is only valid once the endpoint
library has been initialized.
Fixes: 6e0832fa432e ("PCI: Collect all native drivers under drivers/pci/controller/")
Signed-off-by: Alan Douglas <adouglas@cadence.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
An SHPC can be operated either by platform firmware or by the OS. The OS
uses a host bridge ACPI _OSC method to negotiate for control of SHPC. If
firmware wants to prevent an OS from operating an SHPC, it must supply an
_OSC method that declines to grant SHPC ownership to the OS.
If acpi_pci_find_root() returns NULL, it means there's no ACPI host bridge
device (PNP0A03 or PNP0A08) and hence no _OSC method, so the OS is always
allowed to manage the SHPC.
Fix a NULL pointer dereference when CONFIG_ACPI=y but the current
hardware/firmware platform doesn't support ACPI. In that case,
acpi_get_hp_hw_control_from_firmware() is implemented but
acpi_pci_find_root() returns NULL.
Fixes: 90cc0c3cc709 ("PCI: shpchp: Add shpchp_is_native()")
Link: https://lkml.kernel.org/r/20180621164715.28160-1-marc.zyngier@arm.com
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
|
|
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:
devm_kzalloc(handle, a * b, gfp)
with:
devm_kcalloc(handle, a * b, gfp)
as well as handling cases of:
devm_kzalloc(handle, a * b * c, gfp)
with:
devm_kzalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
devm_kcalloc(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
devm_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
devm_kzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
devm_kzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
devm_kzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE,
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * E2
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * (E2)
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
- squash AER directory into drivers/pci/pcie/aer.c (Bjorn Helgaas)
* pci/aer-squash:
PCI/AER: Use "PCI Express" consistently in Kconfig text
PCI/AER: Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/
PCI/AER: Squash Kconfig.debug into Kconfig
PCI/AER: Move private AER things to aerdrv.c
PCI/AER: Move aer_irq() declaration to portdrv.h
PCI/AER: Move pcie_aer_get_firmware_first() to portdrv.h
PCI/AER: Remove duplicate pcie_port_bus_type declaration
PCI/AER: Squash ecrc.c into aerdrv.c
PCI/AER: Squash aerdrv_acpi.c into aerdrv.c
PCI/AER: Squash aerdrv_errprint.c into aerdrv.c
PCI/AER: Squash aerdrv_core.c into aerdrv.c
PCI/AER: Reorder code to group probe/remove stuff together
PCI/AER: Remove forward declarations
|
|
Use "PCI Express" consistently in Kconfig text. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/ so they're next to
other PCIe service drivers. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Squash Kconfig.debug into Kconfig. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Most of the things in aerdrv.h are only used in aerdrv.c, so move them
there. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
The aer_irq() declaration is the only thing needed by aer_inject.c. Move
it to portdrv.h so we eventually get rid of aerdrv.h completely. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Move pcie_aer_get_firmware_first() to portdrv.h, where it can be more
easily shared between AER and DPC. Then DPC no longer needs to include
aer/aerdrv.h. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
pcie_port_bus_type is already declared in portdrv.h, so remove the
unnecessary duplicate declaration in aerdrv.h. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Squash ecrc.c into aerdrv.c. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Squash aerdrv_acpi.c into aerdrv.c. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Squash aerdrv_errprint.c into aerdrv.c. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Squash aerdrv_core.c into aerdrv.c. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Reorder code to group probe/remove stuff together. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Reorder code to remove forward declarations. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
Native PCI drivers for root complex devices were originally all in
drivers/pci/host/. Some of these devices can also be operated in endpoint
mode. Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.
These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.
No functional change intended.
Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- unify AER decoding for native and ACPI CPER sources (Alexandru
Gagniuc)
- add TLP header info to AER tracepoint (Thomas Tai)
- add generic pcie_wait_for_link() interface (Oza Pawandeep)
- handle AER ERR_FATAL by removing and re-enumerating devices, as
Downstream Port Containment does (Oza Pawandeep)
- factor out common code between AER and DPC recovery (Oza Pawandeep)
- stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)
- share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)
- disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)
- respect platform ownership of LTR (Bjorn Helgaas)
- clear interrupt status in top half to avoid interrupt storm (Oza
Pawandeep)
- neaten pci=earlydump output (Andy Shevchenko)
- avoid errors when extended config space inaccessible (Gilles Buloz)
- prevent sysfs disable of device while driver attached (Christoph
Hellwig)
- use core interface to report PCIe link properties in bnx2x, bnxt_en,
cxgb4, ixgbe (Bjorn Helgaas)
- remove unused pcie_get_minimum_link() (Bjorn Helgaas)
- fix use-before-set error in ibmphp (Dan Carpenter)
- fix pciehp timeouts caused by Command Completed errata (Bjorn
Helgaas)
- fix refcounting in pnv_php hotplug (Julia Lawall)
- clear pciehp Presence Detect and Data Link Layer Status Changed on
resume so we don't miss hotplug events (Mika Westerberg)
- only request pciehp control if we support it, so platform can use
ACPI hotplug otherwise (Mika Westerberg)
- convert SHPC to be builtin only (Mika Westerberg)
- request SHPC control via _OSC if we support it (Mika Westerberg)
- simplify SHPC handoff from firmware (Mika Westerberg)
- fix an SHPC quirk that mistakenly included *all* AMD bridges as well
as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)
- assign a bus number even to non-native hotplug bridges to leave
space for acpiphp additions, to fix a common Thunderbolt xHCI
hot-add failure (Mika Westerberg)
- keep acpiphp from scanning native hotplug bridges, to fix common
Thunderbolt hot-add failures (Mika Westerberg)
- improve "partially hidden behind bridge" messages from core (Mika
Westerberg)
- add macros for PCIe Link Control 2 register (Frederick Lawler)
- replace IB/hfi1 custom macros with PCI core versions (Frederick
Lawler)
- remove dead microblaze and xtensa code (Bjorn Helgaas)
- use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)
- remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
Helgaas)
- add managed interface to get PCI host bridge resources from OF (Jan
Kiszka)
- add support for unbinding generic PCI host controller (Jan Kiszka)
- fix memory leaks when unbinding generic PCI host controller (Jan
Kiszka)
- request legacy VGA framebuffer only for VGA devices to avoid false
device conflicts (Bjorn Helgaas)
- turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)
- add generic enable function for simple SR-IOV hardware (Alexander
Duyck)
- use generic SR-IOV enable for ena, nvme (Alexander Duyck)
- add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)
- add ACS quirk for Intel 300 series (Mika Westerberg)
- enable register clock for Armada 7K/8K (Gregory CLEMENT)
- reduce Keystone "link already up" log level (Fabio Estevam)
- move private DT functions to drivers/pci/ (Rob Herring)
- factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)
- add DesignWare support to the endpoint test driver (Gustavo
Pimentel)
- add DesignWare support for endpoint mode (Gustavo Pimentel)
- use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
artpec6 (Gustavo Pimentel)
- fix Qualcomm bitwise NOT issue (Dan Carpenter)
- add Qualcomm runtime PM support (Srinivas Kandagatla)
- fix DesignWare enumeration below bridges (Koen Vandeputte)
- use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)
- add configfs entries for pci_epf_driver device IDs (Kishon Vijay
Abraham I)
- clean up pci_endpoint_test driver (Gustavo Pimentel)
- update Layerscape maintainer email addresses (Minghuan Lian)
- add COMPILE_TEST to improve build test coverage (Rob Herring)
- fix Hyper-V bus registration failure caused by domain/serial number
confusion (Sridhar Pitchai)
- improve Hyper-V refcounting and coding style (Stephen Hemminger)
- avoid potential Hyper-V hang waiting for a response that will never
come (Dexuan Cui)
- implement Mediatek chained IRQ handling (Honghui Zhang)
- fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)
- add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)
- add Mobiveil MSI support (Subrahmanya Lingappa)
- clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
(Marek Vasut)
- poll more frequently (5us vs 5ms) while waiting for R-Car data link
active (Marek Vasut)
- use generic OF parsing interface in R-Car (Vladimir Zapolskiy)
- add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)
- add R-Car gen3 PHY support (Sergei Shtylyov)
- improve R-Car PHYRDY polling (Sergei Shtylyov)
- clean up R-Car macros (Marek Vasut)
- use runtime PM for R-Car controller clock (Dien Pham)
- update arm64 defconfig for Rockchip (Shawn Lin)
- refactor Rockchip code to facilitate both root port and endpoint
mode (Shawn Lin)
- add Rockchip endpoint mode driver (Shawn Lin)
- support VMD "membar shadow" feature (Jon Derrick)
- support VMD bus number offsets (Jon Derrick)
- add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)
- remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
selections (Bjorn Helgaas)
- clean up quirks.c organization and whitespace (Bjorn Helgaas)
* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
PCI/AER: Replace struct pcie_device with pci_dev
PCI/AER: Remove unused parameters
PCI: qcom: Include gpio/consumer.h
PCI: Improve "partially hidden behind bridge" log message
PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
PCI: Move resource distribution for single bridge outside loop
PCI: Account for all bridges on bus when distributing bus numbers
ACPI / hotplug / PCI: Drop unnecessary parentheses
ACPI / hotplug / PCI: Mark stale PCI devices disconnected
ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
PCI: hotplug: Add hotplug_is_native()
PCI: shpchp: Add shpchp_is_native()
PCI: shpchp: Fix AMD POGO identification
PCI: mobiveil: Add MSI support
PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
PCI/AER: Decode Error Source Requester ID
PCI/AER: Remove aer_recover_work_func() forward declaration
PCI/DPC: Use the generic pcie_do_fatal_recovery() path
PCI/AER: Pass service type to pcie_do_fatal_recovery()
PCI/DPC: Disable ERR_NONFATAL handling by DPC
...
|
|
- clean up quirks.c organization and whitespace (Bjorn Helgaas)
* pci/trivial:
PCI: Clean up whitespace in quirks.c
PCI: Reorder quirks infrastructure code
|
