From f9f8b33d373056788a60c464dd8eb5b91ba518f8 Mon Sep 17 00:00:00 2001 From: Mike Looijmans Date: Wed, 24 Aug 2016 10:13:27 +0200 Subject: hwmon: (max6650) Add initial rpm target devicetree documentation Add devicetree property for early initialization of the fan controller to prevent overheating, for example when resetting the board while the fan was completely turned off. Signed-off-by: Mike Looijmans Acked-by: Rob Herring Signed-off-by: Guenter Roeck --- Documentation/devicetree/bindings/hwmon/max6650.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/devicetree/bindings/hwmon/max6650.txt') diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt index d6c10e3680cb..f6bd87d8e284 100644 --- a/Documentation/devicetree/bindings/hwmon/max6650.txt +++ b/Documentation/devicetree/bindings/hwmon/max6650.txt @@ -13,6 +13,10 @@ Optional properties, default is to retain the chip's current setting: - maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values allow more fine-grained control of slower fans. Valid: 1, 2, 4, 8, 16. +- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the + driver selects closed-loop mode and the requested speed. + This ensures the fan is already running before userspace + takes over. Example: fan-max6650: max6650@1b { @@ -20,4 +24,5 @@ Example: compatible = "maxim,max6650"; maxim,fan-microvolt = <12000000>; maxim,fan-prescale = <4>; + maxim,fan-target-rpm = <1200>; }; -- cgit v1.2.3