From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/parport/parport_cs.c | 397 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 397 insertions(+) create mode 100644 drivers/parport/parport_cs.c (limited to 'drivers/parport/parport_cs.c') diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c new file mode 100644 index 000000000000..a3fa8185af2a --- /dev/null +++ b/drivers/parport/parport_cs.c @@ -0,0 +1,397 @@ +/*====================================================================== + + A driver for PCMCIA parallel port adapters + + (specifically, for the Quatech SPP-100 EPP card: other cards will + probably require driver tweaks) + + parport_cs.c 1.29 2002/10/11 06:57:41 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + . Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in + which case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +/*====================================================================*/ + +/* Module parameters */ + +MODULE_AUTHOR("David Hinds "); +MODULE_DESCRIPTION("PCMCIA parallel port card driver"); +MODULE_LICENSE("Dual MPL/GPL"); + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) + +INT_MODULE_PARM(epp_mode, 1); + +#ifdef PCMCIA_DEBUG +INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG); +#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) +static char *version = +"parport_cs.c 1.29 2002/10/11 06:57:41 (David Hinds)"; +#else +#define DEBUG(n, args...) +#endif + +/*====================================================================*/ + +#define FORCE_EPP_MODE 0x08 + +typedef struct parport_info_t { + dev_link_t link; + int ndev; + dev_node_t node; + struct parport *port; +} parport_info_t; + +static dev_link_t *parport_attach(void); +static void parport_detach(dev_link_t *); +static void parport_config(dev_link_t *link); +static void parport_cs_release(dev_link_t *); +static int parport_event(event_t event, int priority, + event_callback_args_t *args); + +static dev_info_t dev_info = "parport_cs"; +static dev_link_t *dev_list = NULL; + +/*====================================================================== + + parport_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. + +======================================================================*/ + +static dev_link_t *parport_attach(void) +{ + parport_info_t *info; + dev_link_t *link; + client_reg_t client_reg; + int ret; + + DEBUG(0, "parport_attach()\n"); + + /* Create new parport device */ + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) return NULL; + memset(info, 0, sizeof(*info)); + link = &info->link; link->priv = info; + + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->conf.Attributes = CONF_ENABLE_IRQ; + link->conf.Vcc = 50; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &parport_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + parport_detach(link); + return NULL; + } + + return link; +} /* parport_attach */ + +/*====================================================================== + + This deletes a driver "instance". The device is de-registered + with Card Services. If it has been released, all local data + structures are freed. Otherwise, the structures will be freed + when the device is released. + +======================================================================*/ + +static void parport_detach(dev_link_t *link) +{ + dev_link_t **linkp; + int ret; + + DEBUG(0, "parport_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) break; + if (*linkp == NULL) + return; + + if (link->state & DEV_CONFIG) + parport_cs_release(link); + + if (link->handle) { + ret = pcmcia_deregister_client(link->handle); + if (ret != CS_SUCCESS) + cs_error(link->handle, DeregisterClient, ret); + } + + /* Unlink, free device structure */ + *linkp = link->next; + kfree(link->priv); + +} /* parport_detach */ + +/*====================================================================== + + parport_config() is scheduled to run after a CARD_INSERTION event + is received, to configure the PCMCIA socket, and to make the + parport device available to the system. + +======================================================================*/ + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +void parport_config(dev_link_t *link) +{ + client_handle_t handle = link->handle; + parport_info_t *info = link->priv; + tuple_t tuple; + u_short buf[128]; + cisparse_t parse; + config_info_t conf; + cistpl_cftable_entry_t *cfg = &parse.cftable_entry; + cistpl_cftable_entry_t dflt = { 0 }; + struct parport *p; + int last_ret, last_fn; + + DEBUG(0, "parport_config(0x%p)\n", link); + + tuple.TupleData = (cisdata_t *)buf; + tuple.TupleOffset = 0; tuple.TupleDataMax = 255; + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CONFIG; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Not sure if this is right... look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf)); + + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + tuple.Attributes = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + if (pcmcia_get_tuple_data(handle, &tuple) != 0 || + pcmcia_parse_tuple(handle, &tuple, &parse) != 0) + goto next_entry; + + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + link->conf.ConfigIndex = cfg->index; + if (epp_mode) + link->conf.ConfigIndex |= FORCE_EPP_MODE; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (io->nwin == 2) { + link->io.BasePort2 = io->win[1].base; + link->io.NumPorts2 = io->win[1].len; + } + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + /* If we've got this far, we're done */ + break; + } + + next_entry: + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; + CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple)); + } + + CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq)); + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf)); + + release_region(link->io.BasePort1, link->io.NumPorts1); + if (link->io.NumPorts2) + release_region(link->io.BasePort2, link->io.NumPorts2); + p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2, + link->irq.AssignedIRQ, PARPORT_DMA_NONE, + NULL); + if (p == NULL) { + printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at " + "0x%3x, irq %u failed\n", link->io.BasePort1, + link->irq.AssignedIRQ); + goto failed; + } + + p->modes |= PARPORT_MODE_PCSPP; + if (epp_mode) + p->modes |= PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP; + info->ndev = 1; + info->node.major = LP_MAJOR; + info->node.minor = p->number; + info->port = p; + strcpy(info->node.dev_name, p->name); + link->dev = &info->node; + + link->state &= ~DEV_CONFIG_PENDING; + return; + +cs_failed: + cs_error(link->handle, last_fn, last_ret); +failed: + parport_cs_release(link); + link->state &= ~DEV_CONFIG_PENDING; + +} /* parport_config */ + +/*====================================================================== + + After a card is removed, parport_cs_release() will unregister the + device, and release the PCMCIA configuration. If the device is + still open, this will be postponed until it is closed. + +======================================================================*/ + +void parport_cs_release(dev_link_t *link) +{ + parport_info_t *info = link->priv; + + DEBUG(0, "parport_release(0x%p)\n", link); + + if (info->ndev) { + struct parport *p = info->port; + parport_pc_unregister_port(p); + request_region(link->io.BasePort1, link->io.NumPorts1, + info->node.dev_name); + if (link->io.NumPorts2) + request_region(link->io.BasePort2, link->io.NumPorts2, + info->node.dev_name); + } + info->ndev = 0; + link->dev = NULL; + + pcmcia_release_configuration(link->handle); + pcmcia_release_io(link->handle, &link->io); + pcmcia_release_irq(link->handle, &link->irq); + + link->state &= ~DEV_CONFIG; + +} /* parport_cs_release */ + +/*====================================================================== + + The card status event handler. Mostly, this schedules other + stuff to run after an event is received. + +======================================================================*/ + +int parport_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + + DEBUG(1, "parport_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) + parport_cs_release(link); + break; + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + parport_config(link); + break; + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) + pcmcia_release_configuration(link->handle); + break; + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (DEV_OK(link)) + pcmcia_request_configuration(link->handle, &link->conf); + break; + } + return 0; +} /* parport_event */ + +static struct pcmcia_driver parport_cs_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "parport_cs", + }, + .attach = parport_attach, + .detach = parport_detach, +}; + +static int __init init_parport_cs(void) +{ + return pcmcia_register_driver(&parport_cs_driver); +} + +static void __exit exit_parport_cs(void) +{ + pcmcia_unregister_driver(&parport_cs_driver); + BUG_ON(dev_list != NULL); +} + +module_init(init_parport_cs); +module_exit(exit_parport_cs); -- cgit v1.2.3