From 0af7af7da6510f12595b81ba98bb15dd7ffed1f3 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 17 Apr 2018 16:29:54 +0200 Subject: spi: spi-s3c64xx: Allow higher transfer lengths in polling IO mode Some variants of the SPI controller have no DMA support, in such case SPI transfers longer than the FIFO length are not currently properly handled by the driver. Fix it by doing multiple transfers in the s3c64xx_spi_transfer_one() function if the SPI transfer length exceeds the FIFO size. Signed-off-by: Sylwester Nawrocki Reviewed-by: Andi Shyti Signed-off-by: Mark Brown --- drivers/spi/spi-s3c64xx.c | 99 +++++++++++++++++++++++++++++++---------------- 1 file changed, 66 insertions(+), 33 deletions(-) (limited to 'drivers/spi/spi-s3c64xx.c') diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 27cd8c59eabf..755ab2dc6969 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -635,11 +635,14 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master, { struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); const unsigned int fifo_len = (FIFO_LVL_MASK(sdd) >> 1) + 1; + const void *tx_buf = NULL; + void *rx_buf = NULL; + int target_len = 0, origin_len = 0; + int use_dma = 0; int status; u32 speed; u8 bpw; unsigned long flags; - int use_dma; reinit_completion(&sdd->xfer_completion); @@ -654,47 +657,77 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master, s3c64xx_spi_config(sdd); } - /* Polling method for xfers not bigger than FIFO capacity */ - use_dma = 0; if (!is_polling(sdd) && (xfer->len > fifo_len) && - sdd->rx_dma.ch && sdd->tx_dma.ch) + sdd->rx_dma.ch && sdd->tx_dma.ch) { use_dma = 1; - spin_lock_irqsave(&sdd->lock, flags); + } else if (is_polling(sdd) && xfer->len > fifo_len) { + tx_buf = xfer->tx_buf; + rx_buf = xfer->rx_buf; + origin_len = xfer->len; - /* Pending only which is to be done */ - sdd->state &= ~RXBUSY; - sdd->state &= ~TXBUSY; + target_len = xfer->len; + if (xfer->len > fifo_len) + xfer->len = fifo_len; + } + + do { + spin_lock_irqsave(&sdd->lock, flags); - s3c64xx_enable_datapath(sdd, xfer, use_dma); + /* Pending only which is to be done */ + sdd->state &= ~RXBUSY; + sdd->state &= ~TXBUSY; - /* Start the signals */ - s3c64xx_spi_set_cs(spi, true); + s3c64xx_enable_datapath(sdd, xfer, use_dma); - spin_unlock_irqrestore(&sdd->lock, flags); + /* Start the signals */ + s3c64xx_spi_set_cs(spi, true); - if (use_dma) - status = s3c64xx_wait_for_dma(sdd, xfer); - else - status = s3c64xx_wait_for_pio(sdd, xfer); - - if (status) { - dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n", - xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, - (sdd->state & RXBUSY) ? 'f' : 'p', - (sdd->state & TXBUSY) ? 'f' : 'p', - xfer->len); - - if (use_dma) { - if (xfer->tx_buf != NULL - && (sdd->state & TXBUSY)) - dmaengine_terminate_all(sdd->tx_dma.ch); - if (xfer->rx_buf != NULL - && (sdd->state & RXBUSY)) - dmaengine_terminate_all(sdd->rx_dma.ch); + spin_unlock_irqrestore(&sdd->lock, flags); + + if (use_dma) + status = s3c64xx_wait_for_dma(sdd, xfer); + else + status = s3c64xx_wait_for_pio(sdd, xfer); + + if (status) { + dev_err(&spi->dev, + "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, + (sdd->state & RXBUSY) ? 'f' : 'p', + (sdd->state & TXBUSY) ? 'f' : 'p', + xfer->len); + + if (use_dma) { + if (xfer->tx_buf && (sdd->state & TXBUSY)) + dmaengine_terminate_all(sdd->tx_dma.ch); + if (xfer->rx_buf && (sdd->state & RXBUSY)) + dmaengine_terminate_all(sdd->rx_dma.ch); + } + } else { + s3c64xx_flush_fifo(sdd); } - } else { - s3c64xx_flush_fifo(sdd); + if (target_len > 0) { + target_len -= xfer->len; + + if (xfer->tx_buf) + xfer->tx_buf += xfer->len; + + if (xfer->rx_buf) + xfer->rx_buf += xfer->len; + + if (target_len > fifo_len) + xfer->len = fifo_len; + else + xfer->len = target_len; + } + } while (target_len > 0); + + if (origin_len) { + /* Restore original xfer buffers and length */ + xfer->tx_buf = tx_buf; + xfer->rx_buf = rx_buf; + xfer->len = origin_len; } return status; -- cgit v1.2.3