From e740b019d7c6b4de38f57a26d4cf1b15125bdcbf Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 21 May 2018 16:39:55 +0300 Subject: xhci: xhci-hub: use new port structures to get port address instead of port array Use the new port structures for functions in xhci-hub.c to get port mmio address of portsc register instead of the port array xhci_get_port_io_addr() is no longer needeed and is removed. Plan is to get rid of the mmio port array completely. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 140 ++++++++++++++++++++++++-------------------- 1 file changed, 78 insertions(+), 62 deletions(-) (limited to 'drivers/usb/host/xhci-hub.c') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index b6fd26fa7faf..0796f08934fb 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -189,9 +189,10 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; u32 portsc; unsigned int i; + struct xhci_hub *rhub; - ports = xhci->num_usb2_ports; - + rhub = &xhci->usb2_rhub; + ports = rhub->num_ports; xhci_common_hub_descriptor(xhci, desc, ports); desc->bDescriptorType = USB_DT_HUB; temp = 1 + (ports / 8); @@ -202,7 +203,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, */ memset(port_removable, 0, sizeof(port_removable)); for (i = 0; i < ports; i++) { - portsc = readl(xhci->usb2_ports[i]); + portsc = readl(rhub->ports[i]->addr); /* If a device is removable, PORTSC reports a 0, same as in the * hub descriptor DeviceRemovable bits. */ @@ -241,8 +242,10 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, u16 port_removable; u32 portsc; unsigned int i; + struct xhci_hub *rhub; - ports = xhci->num_usb3_ports; + rhub = &xhci->usb3_rhub; + ports = rhub->num_ports; xhci_common_hub_descriptor(xhci, desc, ports); desc->bDescriptorType = USB_DT_SS_HUB; desc->bDescLength = USB_DT_SS_HUB_SIZE; @@ -256,7 +259,7 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, port_removable = 0; /* bit 0 is reserved, bit 1 is for port 1, etc. */ for (i = 0; i < ports; i++) { - portsc = readl(xhci->usb3_ports[i]); + portsc = readl(rhub->ports[i]->addr); if (portsc & PORT_DEV_REMOVE) port_removable |= 1 << (i + 1); } @@ -563,14 +566,6 @@ struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) return &xhci->usb2_rhub; } -static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) -{ - __le32 __iomem **port_array; - - xhci_get_ports(hcd, &port_array); - return port_array[index]; -} - /* * xhci_set_port_power() must be called with xhci->lock held. * It will release and re-aquire the lock while calling ACPI @@ -579,21 +574,23 @@ static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) { - __le32 __iomem *addr; + struct xhci_hub *rhub; + struct xhci_port *port; u32 temp; - addr = xhci_get_port_io_addr(hcd, index); - temp = readl(addr); + rhub = xhci_get_rhub(hcd); + port = rhub->ports[index]; + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); if (on) { /* Power on */ - writel(temp | PORT_POWER, addr); - temp = readl(addr); + writel(temp | PORT_POWER, port->addr); + temp = readl(port->addr); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", index, temp); } else { /* Power off */ - writel(temp & ~PORT_POWER, addr); + writel(temp & ~PORT_POWER, port->addr); } spin_unlock_irqrestore(&xhci->lock, *flags); @@ -609,13 +606,13 @@ static void xhci_port_set_test_mode(struct xhci_hcd *xhci, u16 test_mode, u16 wIndex) { u32 temp; - __le32 __iomem *addr; + struct xhci_port *port; - /* xhci only supports test mode for usb2 ports, i.e. xhci->main_hcd */ - addr = xhci_get_port_io_addr(xhci->main_hcd, wIndex); - temp = readl(addr + PORTPMSC); + /* xhci only supports test mode for usb2 ports */ + port = xhci->usb2_rhub.ports[wIndex]; + temp = readl(port->addr + PORTPMSC); temp |= test_mode << PORT_TEST_MODE_SHIFT; - writel(temp, addr + PORTPMSC); + writel(temp, port->addr + PORTPMSC); xhci->test_mode = test_mode; if (test_mode == TEST_FORCE_EN) xhci_start(xhci); @@ -642,10 +639,10 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci, /* Put all ports to the Disable state by clear PP */ xhci_dbg(xhci, "Disable all port (PP = 0)\n"); /* Power off USB3 ports*/ - for (i = 0; i < xhci->num_usb3_ports; i++) + for (i = 0; i < xhci->usb3_rhub.num_ports; i++) xhci_set_port_power(xhci, xhci->shared_hcd, i, false, flags); /* Power off USB2 ports*/ - for (i = 0; i < xhci->num_usb2_ports; i++) + for (i = 0; i < xhci->usb2_rhub.num_ports; i++) xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags); /* Stop the controller */ xhci_dbg(xhci, "Stop controller\n"); @@ -803,7 +800,7 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) { - u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1); bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) @@ -858,6 +855,11 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; int slot_id; + struct xhci_hub *rhub; + struct xhci_port *port; + + rhub = xhci_get_rhub(hcd); + port = rhub->ports[wIndex]; /* wPortChange bits */ if (raw_port_status & PORT_CSC) @@ -949,7 +951,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } xhci_ring_device(xhci, slot_id); } else { - int port_status = readl(port_array[wIndex]); + int port_status = readl(port->addr); xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", XHCI_MAX_REXIT_TIMEOUT, port_status); @@ -1040,7 +1042,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wake_mask = 0; u16 timeout = 0; u16 test_mode = 0; + struct xhci_hub *rhub; + struct xhci_port **ports; + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -1079,7 +1085,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1105,7 +1111,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, retval = -EINVAL; break; } - port_li = readl(port_array[wIndex] + PORTLI); + port_li = readl(ports[wIndex]->addr + PORTLI); status = xhci_get_ext_port_status(temp, port_li); put_unaligned_le32(cpu_to_le32(status), &buf[4]); } @@ -1123,7 +1129,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1133,7 +1139,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* FIXME: What new port features do we need to support? */ switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if ((temp & PORT_PLS_MASK) != XDEV_U0) { /* Resume the port to U0 first */ xhci_set_link_state(xhci, port_array, wIndex, @@ -1146,7 +1152,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * a port unless the port reports that it is in the * enabled (PED = ‘1’,PLS < ‘3’) state. */ - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) || (temp & PORT_PLS_MASK) >= XDEV_U3) { xhci_warn(xhci, "USB core suspending device not in U0/U1/U2.\n"); @@ -1170,12 +1176,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, msleep(10); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); bus_state->suspended_ports |= 1 << wIndex; break; case USB_PORT_FEAT_LINK_STATE: - temp = readl(port_array[wIndex]); - + temp = readl(ports[wIndex]->addr); /* Disable port */ if (link_state == USB_SS_PORT_LS_SS_DISABLED) { xhci_dbg(xhci, "Disable port %d\n", wIndex); @@ -1187,8 +1192,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp |= PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | PORT_RC | PORT_PLC | PORT_CEC; - writel(temp | PORT_PE, port_array[wIndex]); - temp = readl(port_array[wIndex]); + writel(temp | PORT_PE, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); break; } @@ -1197,7 +1202,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "Enable port %d\n", wIndex); xhci_set_link_state(xhci, port_array, wIndex, link_state); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); break; } @@ -1230,7 +1235,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, wIndex); xhci_set_link_state(xhci, port_array, wIndex, link_state); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); break; } /* Port must be enabled */ @@ -1264,7 +1269,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, msleep(20); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (link_state == USB_SS_PORT_LS_U3) bus_state->suspended_ports |= 1 << wIndex; break; @@ -1279,40 +1284,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); - writel(temp, port_array[wIndex]); + writel(temp, ports[wIndex]->addr); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_REMOTE_WAKE_MASK: xhci_set_remote_wake_mask(xhci, port_array, wIndex, wake_mask); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "set port remote wake mask, " "actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_BH_PORT_RESET: temp |= PORT_WR; - writel(temp, port_array[wIndex]); - - temp = readl(port_array[wIndex]); + writel(temp, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); break; case USB_PORT_FEAT_U1_TIMEOUT: if (hcd->speed < HCD_USB3) goto error; - temp = readl(port_array[wIndex] + PORTPMSC); + temp = readl(ports[wIndex]->addr + PORTPMSC); temp &= ~PORT_U1_TIMEOUT_MASK; temp |= PORT_U1_TIMEOUT(timeout); - writel(temp, port_array[wIndex] + PORTPMSC); + writel(temp, ports[wIndex]->addr + PORTPMSC); break; case USB_PORT_FEAT_U2_TIMEOUT: if (hcd->speed < HCD_USB3) goto error; - temp = readl(port_array[wIndex] + PORTPMSC); + temp = readl(ports[wIndex]->addr + PORTPMSC); temp &= ~PORT_U2_TIMEOUT_MASK; temp |= PORT_U2_TIMEOUT(timeout); - writel(temp, port_array[wIndex] + PORTPMSC); + writel(temp, ports[wIndex]->addr + PORTPMSC); break; case USB_PORT_FEAT_TEST: /* 4.19.6 Port Test Modes (USB2 Test Mode) */ @@ -1327,13 +1331,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } /* unblock any posted writes */ - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); break; case ClearPortFeature: if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1343,7 +1347,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) @@ -1383,11 +1387,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_C_PORT_LINK_STATE: case USB_PORT_FEAT_C_PORT_CONFIG_ERROR: xhci_clear_port_change_bit(xhci, wValue, wIndex, - port_array[wIndex], temp); + ports[wIndex]->addr, temp); break; case USB_PORT_FEAT_ENABLE: xhci_disable_port(hcd, xhci, wIndex, - port_array[wIndex], temp); + ports[wIndex]->addr, temp); break; case USB_PORT_FEAT_POWER: xhci_set_port_power(xhci, hcd, wIndex, false, &flags); @@ -1427,7 +1431,11 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) __le32 __iomem **port_array; struct xhci_bus_state *bus_state; bool reset_change = false; + struct xhci_hub *rhub; + struct xhci_port **ports; + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -1446,7 +1454,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < max_ports; i++) { - temp = readl(port_array[i]); + temp = readl(ports[i]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1481,7 +1489,11 @@ int xhci_bus_suspend(struct usb_hcd *hcd) __le32 __iomem **port_array; struct xhci_bus_state *bus_state; unsigned long flags; + struct xhci_hub *rhub; + struct xhci_port **ports; + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -1503,7 +1515,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) u32 t1, t2; int slot_id; - t1 = readl(port_array[port_index]); + t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { @@ -1543,7 +1555,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - writel(t2, port_array[port_index]); + writel(t2, ports[port_index]->addr); } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); @@ -1591,7 +1603,11 @@ int xhci_bus_resume(struct usb_hcd *hcd) int sret; u32 next_state; u32 temp, portsc; + struct xhci_hub *rhub; + struct xhci_port **ports; + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -1617,7 +1633,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) port_index = max_ports; while (port_index--) { - portsc = readl(port_array[port_index]); + portsc = readl(ports[port_index]->addr); /* warm reset CAS limited ports stuck in polling/compliance */ if ((xhci->quirks & XHCI_MISSING_CAS) && @@ -1646,7 +1662,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) } /* disable wake for all ports, write new link state if needed */ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); - writel(portsc, port_array[port_index]); + writel(portsc, ports[port_index]->addr); } /* USB2 specific resume signaling delay and U0 link state transition */ @@ -1668,7 +1684,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) /* poll for U0 link state complete, both USB2 and USB3 */ for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { - sret = xhci_handshake(port_array[port_index], PORT_PLC, + sret = xhci_handshake(ports[port_index]->addr, PORT_PLC, PORT_PLC, 10 * 1000); if (sret) { xhci_warn(xhci, "port %d resume PLC timeout\n", -- cgit v1.2.3