/** @mainpage
Library SimpleIni
File SimpleIni.h
Author Brodie Thiesfield [code at jellycan dot com]
Source https://github.com/brofield/simpleini
Version 4.17
Jump to the @link CSimpleIniTempl CSimpleIni @endlink interface documentation. @section intro INTRODUCTION This component allows an INI-style configuration file to be used on both Windows and Linux/Unix. It is fast, simple and source code using this component will compile unchanged on either OS. @section features FEATURES - MIT Licence allows free use in all software (including GPL and commercial) - multi-platform (Windows 95/98/ME/NT/2K/XP/2003, Windows CE, Linux, Unix) - loading and saving of INI-style configuration files - configuration files can have any newline format on all platforms - liberal acceptance of file format - key/values with no section - removal of whitespace around sections, keys and values - support for multi-line values (values with embedded newline characters) - optional support for multiple keys with the same name - optional case-insensitive sections and keys (for ASCII characters only) - saves files with sections and keys in the same order as they were loaded - preserves comments on the file, section and keys where possible. - supports both char or wchar_t programming interfaces - supports both MBCS (system locale) and UTF-8 file encodings - system locale does not need to be UTF-8 on Linux/Unix to load UTF-8 file - support for non-ASCII characters in section, keys, values and comments - support for non-standard character types or file encodings via user-written converter classes - support for adding/modifying values programmatically - compiles cleanly in the following compilers: - Windows/VC6 (warning level 3) - Windows/VC.NET 2003 (warning level 4) - Windows/VC 2005 (warning level 4) - Linux/gcc (-Wall) @section usage USAGE SUMMARY -# Define the appropriate symbol for the converter you wish to use and include the SimpleIni.h header file. If no specific converter is defined then the default converter is used. The default conversion mode uses SI_CONVERT_WIN32 on Windows and SI_CONVERT_GENERIC on all other platforms. If you are using ICU then SI_CONVERT_ICU is supported on all platforms. -# Declare an instance the appropriate class. Note that the following definitions are just shortcuts for commonly used types. Other types (PRUnichar, unsigned short, unsigned char) are also possible.
Interface Case-sensitive Load UTF-8 Load MBCS Typedef
SI_CONVERT_GENERIC
char No Yes Yes #1 CSimpleIniA
char Yes Yes Yes CSimpleIniCaseA
wchar_t No Yes Yes CSimpleIniW
wchar_t Yes Yes Yes CSimpleIniCaseW
SI_CONVERT_WIN32
char No No #2 Yes CSimpleIniA
char Yes Yes Yes CSimpleIniCaseA
wchar_t No Yes Yes CSimpleIniW
wchar_t Yes Yes Yes CSimpleIniCaseW
SI_CONVERT_ICU
char No Yes Yes CSimpleIniA
char Yes Yes Yes CSimpleIniCaseA
UChar No Yes Yes CSimpleIniW
UChar Yes Yes Yes CSimpleIniCaseW
#1 On Windows you are better to use CSimpleIniA with SI_CONVERT_WIN32.
#2 Only affects Windows. On Windows this uses MBCS functions and so may fold case incorrectly leading to uncertain results. -# Call LoadData() or LoadFile() to load and parse the INI configuration file -# Access and modify the data of the file using the following functions
GetAllSections Return all section names
GetAllKeys Return all key names within a section
GetAllValues Return all values within a section & key
GetSection Return all key names and values in a section
GetSectionSize Return the number of keys in a section
GetValue Return a value for a section & key
SetValue Add or update a value for a section & key
Delete Remove a section, or a key from a section
-# Call Save() or SaveFile() to save the INI configuration data @section iostreams IO STREAMS SimpleIni supports reading from and writing to STL IO streams. Enable this by defining SI_SUPPORT_IOSTREAMS before including the SimpleIni.h header file. Ensure that if the streams are backed by a file (e.g. ifstream or ofstream) then the flag ios_base::binary has been used when the file was opened. @section multiline MULTI-LINE VALUES Values that span multiple lines are created using the following format.
        key = <<

    Note the following:
    - The text used for ENDTAG can be anything and is used to find
      where the multi-line text ends.
    - The newline after ENDTAG in the start tag, and the newline
      before ENDTAG in the end tag is not included in the data value.
    - The ending tag must be on it's own line with no whitespace before
      or after it.
    - The multi-line value is modified at load so that each line in the value
      is delimited by a single '\\n' character on all platforms. At save time
      it will be converted into the newline format used by the current
      platform.

    @section comments COMMENTS

    Comments are preserved in the file within the following restrictions:
    - Every file may have a single "file comment". It must start with the
      first character in the file, and will end with the first non-comment
      line in the file.
    - Every section may have a single "section comment". It will start
      with the first comment line following the file comment, or the last
      data entry. It ends at the beginning of the section.
    - Every key may have a single "key comment". This comment will start
      with the first comment line following the section start, or the file
      comment if there is no section name.
    - Comments are set at the time that the file, section or key is first
      created. The only way to modify a comment on a section or a key is to
      delete that entry and recreate it with the new comment. There is no
      way to change the file comment.

    @section save SAVE ORDER

    The sections and keys are written out in the same order as they were
    read in from the file. Sections and keys added to the data after the
    file has been loaded will be added to the end of the file when it is
    written. There is no way to specify the location of a section or key
    other than in first-created, first-saved order.

    @section notes NOTES

    - To load UTF-8 data on Windows 95, you need to use Microsoft Layer for
      Unicode, or SI_CONVERT_GENERIC, or SI_CONVERT_ICU.
    - When using SI_CONVERT_GENERIC, ConvertUTF.c must be compiled and linked.
    - When using SI_CONVERT_ICU, ICU header files must be on the include
      path and icuuc.lib must be linked in.
    - To load a UTF-8 file on Windows AND expose it with SI_CHAR == char,
      you should use SI_CONVERT_GENERIC.
    - The collation (sorting) order used for sections and keys returned from
      iterators is NOT DEFINED. If collation order of the text is important
      then it should be done yourself by either supplying a replacement
      SI_STRLESS class, or by sorting the strings external to this library.
    - Usage of the  header on Windows can be disabled by defining
      SI_NO_MBCS. This is defined automatically on Windows CE platforms.

    @section contrib CONTRIBUTIONS
    
    - 2010/05/03: Tobias Gehrig: added GetDoubleValue()

    @section licence MIT LICENCE

    The licence text below is the boilerplate "MIT Licence" used from:
    http://www.opensource.org/licenses/mit-license.php

    Copyright (c) 2006-2012, Brodie Thiesfield

    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is furnished
    to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
    FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
    COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
    IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
    CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

#ifndef INCLUDED_SimpleIni_h
#define INCLUDED_SimpleIni_h

#if defined(_MSC_VER) && (_MSC_VER >= 1020)
# pragma once
#endif

// Disable these warnings in MSVC:
//  4127 "conditional expression is constant" as the conversion classes trigger
//  it with the statement if (sizeof(SI_CHAR) == sizeof(char)). This test will
//  be optimized away in a release build.
//  4503 'insert' : decorated name length exceeded, name was truncated
//  4702 "unreachable code" as the MS STL header causes it in release mode.
//  Again, the code causing the warning will be cleaned up by the compiler.
//  4786 "identifier truncated to 256 characters" as this is thrown hundreds
//  of times VC6 as soon as STL is used.
#ifdef _MSC_VER
# pragma warning (push)
# pragma warning (disable: 4127 4503 4702 4786)
#endif

#include 
#include 
#include 
#include 
#include 
#include 

#ifdef SI_SUPPORT_IOSTREAMS
# include 
#endif // SI_SUPPORT_IOSTREAMS

#ifdef _DEBUG
# ifndef assert
#  include 
# endif
# define SI_ASSERT(x)   assert(x)
#else
# define SI_ASSERT(x)
#endif

enum SI_Error {
    SI_OK       =  0,   //!< No error
    SI_UPDATED  =  1,   //!< An existing value was updated
    SI_INSERTED =  2,   //!< A new value was inserted

    // note: test for any error with (retval < 0)
    SI_FAIL     = -1,   //!< Generic failure
    SI_NOMEM    = -2,   //!< Out of memory error
    SI_FILE     = -3    //!< File error (see errno for detail error)
};

#define SI_UTF8_SIGNATURE     "\xEF\xBB\xBF"

#ifdef _WIN32
# define SI_NEWLINE_A   "\r\n"
# define SI_NEWLINE_W   L"\r\n"
#else // !_WIN32
# define SI_NEWLINE_A   "\n"
# define SI_NEWLINE_W   L"\n"
#endif // _WIN32

#if defined(SI_CONVERT_ICU)
# include 
#endif

#if defined(_WIN32)
# define SI_HAS_WIDE_FILE
# define SI_WCHAR_T     wchar_t
#elif defined(SI_CONVERT_ICU)
# define SI_HAS_WIDE_FILE
# define SI_WCHAR_T     UChar
#endif


// ---------------------------------------------------------------------------
//                              MAIN TEMPLATE CLASS
// ---------------------------------------------------------------------------

/** Simple INI file reader.

    This can be instantiated with the choice of unicode or native characterset,
    and case sensitive or insensitive comparisons of section and key names.
    The supported combinations are pre-defined with the following typedefs:

    
Interface Case-sensitive Typedef
char No CSimpleIniA
char Yes CSimpleIniCaseA
wchar_t No CSimpleIniW
wchar_t Yes CSimpleIniCaseW
Note that using other types for the SI_CHAR is supported. For instance, unsigned char, unsigned short, etc. Note that where the alternative type is a different size to char/wchar_t you may need to supply new helper classes for SI_STRLESS and SI_CONVERTER. */ template class CSimpleIniTempl { public: typedef SI_CHAR SI_CHAR_T; /** key entry */ struct Entry { const SI_CHAR * pItem; const SI_CHAR * pComment; int nOrder; Entry(const SI_CHAR * a_pszItem = NULL, int a_nOrder = 0) : pItem(a_pszItem) , pComment(NULL) , nOrder(a_nOrder) { } Entry(const SI_CHAR * a_pszItem, const SI_CHAR * a_pszComment, int a_nOrder) : pItem(a_pszItem) , pComment(a_pszComment) , nOrder(a_nOrder) { } Entry(const Entry & rhs) { operator=(rhs); } Entry & operator=(const Entry & rhs) { pItem = rhs.pItem; pComment = rhs.pComment; nOrder = rhs.nOrder; return *this; } #if defined(_MSC_VER) && _MSC_VER <= 1200 /** STL of VC6 doesn't allow me to specify my own comparator for list::sort() */ bool operator<(const Entry & rhs) const { return LoadOrder()(*this, rhs); } bool operator>(const Entry & rhs) const { return LoadOrder()(rhs, *this); } #endif /** Strict less ordering by name of key only */ struct KeyOrder : std::binary_function { bool operator()(const Entry & lhs, const Entry & rhs) const { const static SI_STRLESS isLess = SI_STRLESS(); return isLess(lhs.pItem, rhs.pItem); } }; /** Strict less ordering by order, and then name of key */ struct LoadOrder : std::binary_function { bool operator()(const Entry & lhs, const Entry & rhs) const { if (lhs.nOrder != rhs.nOrder) { return lhs.nOrder < rhs.nOrder; } return KeyOrder()(lhs.pItem, rhs.pItem); } }; }; /** map keys to values */ typedef std::multimap TKeyVal; /** map sections to key/value map */ typedef std::map TSection; /** set of dependent string pointers. Note that these pointers are dependent on memory owned by CSimpleIni. */ typedef std::list TNamesDepend; /** interface definition for the OutputWriter object to pass to Save() in order to output the INI file data. */ class OutputWriter { public: OutputWriter() { } virtual ~OutputWriter() { } virtual void Write(const char * a_pBuf) = 0; private: OutputWriter(const OutputWriter &); // disable OutputWriter & operator=(const OutputWriter &); // disable }; /** OutputWriter class to write the INI data to a file */ class FileWriter : public OutputWriter { FILE * m_file; public: FileWriter(FILE * a_file) : m_file(a_file) { } void Write(const char * a_pBuf) { fputs(a_pBuf, m_file); } private: FileWriter(const FileWriter &); // disable FileWriter & operator=(const FileWriter &); // disable }; /** OutputWriter class to write the INI data to a string */ class StringWriter : public OutputWriter { std::string & m_string; public: StringWriter(std::string & a_string) : m_string(a_string) { } void Write(const char * a_pBuf) { m_string.append(a_pBuf); } private: StringWriter(const StringWriter &); // disable StringWriter & operator=(const StringWriter &); // disable }; #ifdef SI_SUPPORT_IOSTREAMS /** OutputWriter class to write the INI data to an ostream */ class StreamWriter : public OutputWriter { std::ostream & m_ostream; public: StreamWriter(std::ostream & a_ostream) : m_ostream(a_ostream) { } void Write(const char * a_pBuf) { m_ostream << a_pBuf; } private: StreamWriter(const StreamWriter &); // disable StreamWriter & operator=(const StreamWriter &); // disable }; #endif // SI_SUPPORT_IOSTREAMS /** Characterset conversion utility class to convert strings to the same format as is used for the storage. */ class Converter : private SI_CONVERTER { public: using SI_CONVERTER::SizeToStore; Converter(bool a_bStoreIsUtf8) : SI_CONVERTER(a_bStoreIsUtf8) { m_scratch.resize(1024); } Converter(const Converter & rhs) { operator=(rhs); } Converter & operator=(const Converter & rhs) { m_scratch = rhs.m_scratch; return *this; } bool ConvertToStore(const SI_CHAR * a_pszString) { size_t uLen = SizeToStore(a_pszString); if (uLen == (size_t)(-1)) { return false; } while (uLen > m_scratch.size()) { m_scratch.resize(m_scratch.size() * 2); } return SI_CONVERTER::ConvertToStore( a_pszString, const_cast(m_scratch.data()), m_scratch.size()); } const char * Data() { return m_scratch.data(); } private: std::string m_scratch; }; public: /*-----------------------------------------------------------------------*/ /** Default constructor. @param a_bIsUtf8 See the method SetUnicode() for details. @param a_bMultiKey See the method SetMultiKey() for details. @param a_bMultiLine See the method SetMultiLine() for details. */ CSimpleIniTempl( bool a_bIsUtf8 = false, bool a_bMultiKey = false, bool a_bMultiLine = false ); /** Destructor */ ~CSimpleIniTempl(); /** Deallocate all memory stored by this object */ void Reset(); /** Has any data been loaded */ bool IsEmpty() const { return m_data.empty(); } /*-----------------------------------------------------------------------*/ /** @{ @name Settings */ /** Set the storage format of the INI data. This affects both the loading and saving of the INI data using all of the Load/Save API functions. This value cannot be changed after any INI data has been loaded. If the file is not set to Unicode (UTF-8), then the data encoding is assumed to be the OS native encoding. This encoding is the system locale on Linux/Unix and the legacy MBCS encoding on Windows NT/2K/XP. If the storage format is set to Unicode then the file will be loaded as UTF-8 encoded data regardless of the native file encoding. If SI_CHAR == char then all of the char* parameters take and return UTF-8 encoded data regardless of the system locale. \param a_bIsUtf8 Assume UTF-8 encoding for the source? */ void SetUnicode(bool a_bIsUtf8 = true) { if (!m_pData) m_bStoreIsUtf8 = a_bIsUtf8; } /** Get the storage format of the INI data. */ bool IsUnicode() const { return m_bStoreIsUtf8; } /** Should multiple identical keys be permitted in the file. If set to false then the last value encountered will be used as the value of the key. If set to true, then all values will be available to be queried. For example, with the following input:
        [section]
        test=value1
        test=value2
        
Then with SetMultiKey(true), both of the values "value1" and "value2" will be returned for the key test. If SetMultiKey(false) is used, then the value for "test" will only be "value2". This value may be changed at any time. \param a_bAllowMultiKey Allow multi-keys in the source? */ void SetMultiKey(bool a_bAllowMultiKey = true) { m_bAllowMultiKey = a_bAllowMultiKey; } /** Get the storage format of the INI data. */ bool IsMultiKey() const { return m_bAllowMultiKey; } /** Should data values be permitted to span multiple lines in the file. If set to false then the multi-line construct << SI_CHAR FORMAT char same format as when loaded (MBCS or UTF-8) wchar_t UTF-8 other UTF-8 Note that comments from the original data is preserved as per the documentation on comments. The order of the sections and values from the original file will be preserved. Any data prepended or appended to the output device must use the the same format (MBCS or UTF-8). You may use the GetConverter() method to convert text to the correct format regardless of the output format being used by SimpleIni. To add a BOM to UTF-8 data, write it out manually at the very beginning like is done in SaveFile when a_bUseBOM is true. @param a_oOutput Output writer to write the data to. @param a_bAddSignature Prepend the UTF-8 BOM if the output data is in UTF-8 format. If it is not UTF-8 then this value is ignored. Do not set this to true if anything has already been written to the OutputWriter. @return SI_Error See error definitions */ SI_Error Save( OutputWriter & a_oOutput, bool a_bAddSignature = false ) const; #ifdef SI_SUPPORT_IOSTREAMS /** Save the INI data to an ostream. See Save() for details. @param a_ostream String to have the INI data appended to. @param a_bAddSignature Prepend the UTF-8 BOM if the output data is in UTF-8 format. If it is not UTF-8 then this value is ignored. Do not set this to true if anything has already been written to the stream. @return SI_Error See error definitions */ SI_Error Save( std::ostream & a_ostream, bool a_bAddSignature = false ) const { StreamWriter writer(a_ostream); return Save(writer, a_bAddSignature); } #endif // SI_SUPPORT_IOSTREAMS /** Append the INI data to a string. See Save() for details. @param a_sBuffer String to have the INI data appended to. @param a_bAddSignature Prepend the UTF-8 BOM if the output data is in UTF-8 format. If it is not UTF-8 then this value is ignored. Do not set this to true if anything has already been written to the string. @return SI_Error See error definitions */ SI_Error Save( std::string & a_sBuffer, bool a_bAddSignature = false ) const { StringWriter writer(a_sBuffer); return Save(writer, a_bAddSignature); } /*-----------------------------------------------------------------------*/ /** @} @{ @name Accessing INI Data */ /** Retrieve all section names. The list is returned as an STL vector of names and can be iterated or searched as necessary. Note that the sort order of the returned strings is NOT DEFINED. You can sort the names into the load order if desired. Search this file for ".sort" for an example. NOTE! This structure contains only pointers to strings. The actual string data is stored in memory owned by CSimpleIni. Ensure that the CSimpleIni object is not destroyed or Reset() while these pointers are in use! @param a_names Vector that will receive all of the section names. See note above! */ void GetAllSections( TNamesDepend & a_names ) const; /** Retrieve all unique key names in a section. The sort order of the returned strings is NOT DEFINED. You can sort the names into the load order if desired. Search this file for ".sort" for an example. Only unique key names are returned. NOTE! This structure contains only pointers to strings. The actual string data is stored in memory owned by CSimpleIni. Ensure that the CSimpleIni object is not destroyed or Reset() while these strings are in use! @param a_pSection Section to request data for @param a_names List that will receive all of the key names. See note above! @return true Section was found. @return false Matching section was not found. */ bool GetAllKeys( const SI_CHAR * a_pSection, TNamesDepend & a_names ) const; /** Retrieve all values for a specific key. This method can be used when multiple keys are both enabled and disabled. Note that the sort order of the returned strings is NOT DEFINED. You can sort the names into the load order if desired. Search this file for ".sort" for an example. NOTE! The returned values are pointers to string data stored in memory owned by CSimpleIni. Ensure that the CSimpleIni object is not destroyed or Reset while you are using this pointer! @param a_pSection Section to search @param a_pKey Key to search for @param a_values List to return if the key is not found @return true Key was found. @return false Matching section/key was not found. */ bool GetAllValues( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, TNamesDepend & a_values ) const; /** Query the number of keys in a specific section. Note that if multiple keys are enabled, then this value may be different to the number of keys returned by GetAllKeys. @param a_pSection Section to request data for @return -1 Section does not exist in the file @return >=0 Number of keys in the section */ int GetSectionSize( const SI_CHAR * a_pSection ) const; /** Retrieve all key and value pairs for a section. The data is returned as a pointer to an STL map and can be iterated or searched as desired. Note that multiple entries for the same key may exist when multiple keys have been enabled. NOTE! This structure contains only pointers to strings. The actual string data is stored in memory owned by CSimpleIni. Ensure that the CSimpleIni object is not destroyed or Reset() while these strings are in use! @param a_pSection Name of the section to return @return boolean Was a section matching the supplied name found. */ const TKeyVal * GetSection( const SI_CHAR * a_pSection ) const; /** Retrieve the value for a specific key. If multiple keys are enabled (see SetMultiKey) then only the first value associated with that key will be returned, see GetAllValues for getting all values with multikey. NOTE! The returned value is a pointer to string data stored in memory owned by CSimpleIni. Ensure that the CSimpleIni object is not destroyed or Reset while you are using this pointer! @param a_pSection Section to search @param a_pKey Key to search for @param a_pDefault Value to return if the key is not found @param a_pHasMultiple Optionally receive notification of if there are multiple entries for this key. @return a_pDefault Key was not found in the section @return other Value of the key */ const SI_CHAR * GetValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, const SI_CHAR * a_pDefault = NULL, bool * a_pHasMultiple = NULL ) const; /** Retrieve a numeric value for a specific key. If multiple keys are enabled (see SetMultiKey) then only the first value associated with that key will be returned, see GetAllValues for getting all values with multikey. @param a_pSection Section to search @param a_pKey Key to search for @param a_nDefault Value to return if the key is not found @param a_pHasMultiple Optionally receive notification of if there are multiple entries for this key. @return a_nDefault Key was not found in the section @return other Value of the key */ long GetLongValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, long a_nDefault = 0, bool * a_pHasMultiple = NULL ) const; /** Retrieve a numeric value for a specific key. If multiple keys are enabled (see SetMultiKey) then only the first value associated with that key will be returned, see GetAllValues for getting all values with multikey. @param a_pSection Section to search @param a_pKey Key to search for @param a_nDefault Value to return if the key is not found @param a_pHasMultiple Optionally receive notification of if there are multiple entries for this key. @return a_nDefault Key was not found in the section @return other Value of the key */ double GetDoubleValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, double a_nDefault = 0, bool * a_pHasMultiple = NULL ) const; /** Retrieve a boolean value for a specific key. If multiple keys are enabled (see SetMultiKey) then only the first value associated with that key will be returned, see GetAllValues for getting all values with multikey. Strings starting with "t", "y", "on" or "1" are returned as logically true. Strings starting with "f", "n", "of" or "0" are returned as logically false. For all other values the default is returned. Character comparisons are case-insensitive. @param a_pSection Section to search @param a_pKey Key to search for @param a_bDefault Value to return if the key is not found @param a_pHasMultiple Optionally receive notification of if there are multiple entries for this key. @return a_nDefault Key was not found in the section @return other Value of the key */ bool GetBoolValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, bool a_bDefault = false, bool * a_pHasMultiple = NULL ) const; /** Add or update a section or value. This will always insert when multiple keys are enabled. @param a_pSection Section to add or update @param a_pKey Key to add or update. Set to NULL to create an empty section. @param a_pValue Value to set. Set to NULL to create an empty section. @param a_pComment Comment to be associated with the section or the key. If a_pKey is NULL then it will be associated with the section, otherwise the key. Note that a comment may be set ONLY when the section or key is first created (i.e. when this function returns the value SI_INSERTED). If you wish to create a section with a comment then you need to create the section separately to the key. The comment string must be in full comment form already (have a comment character starting every line). @param a_bForceReplace Should all existing values in a multi-key INI file be replaced with this entry. This option has no effect if not using multi-key files. The difference between Delete/SetValue and SetValue with a_bForceReplace = true, is that the load order and comment will be preserved this way. @return SI_Error See error definitions @return SI_UPDATED Value was updated @return SI_INSERTED Value was inserted */ SI_Error SetValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, const SI_CHAR * a_pValue, const SI_CHAR * a_pComment = NULL, bool a_bForceReplace = false ) { return AddEntry(a_pSection, a_pKey, a_pValue, a_pComment, a_bForceReplace, true); } /** Add or update a numeric value. This will always insert when multiple keys are enabled. @param a_pSection Section to add or update @param a_pKey Key to add or update. @param a_nValue Value to set. @param a_pComment Comment to be associated with the key. See the notes on SetValue() for comments. @param a_bUseHex By default the value will be written to the file in decimal format. Set this to true to write it as hexadecimal. @param a_bForceReplace Should all existing values in a multi-key INI file be replaced with this entry. This option has no effect if not using multi-key files. The difference between Delete/SetLongValue and SetLongValue with a_bForceReplace = true, is that the load order and comment will be preserved this way. @return SI_Error See error definitions @return SI_UPDATED Value was updated @return SI_INSERTED Value was inserted */ SI_Error SetLongValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, long a_nValue, const SI_CHAR * a_pComment = NULL, bool a_bUseHex = false, bool a_bForceReplace = false ); /** Add or update a double value. This will always insert when multiple keys are enabled. @param a_pSection Section to add or update @param a_pKey Key to add or update. @param a_nValue Value to set. @param a_pComment Comment to be associated with the key. See the notes on SetValue() for comments. @param a_bForceReplace Should all existing values in a multi-key INI file be replaced with this entry. This option has no effect if not using multi-key files. The difference between Delete/SetDoubleValue and SetDoubleValue with a_bForceReplace = true, is that the load order and comment will be preserved this way. @return SI_Error See error definitions @return SI_UPDATED Value was updated @return SI_INSERTED Value was inserted */ SI_Error SetDoubleValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, double a_nValue, const SI_CHAR * a_pComment = NULL, bool a_bForceReplace = false ); /** Add or update a boolean value. This will always insert when multiple keys are enabled. @param a_pSection Section to add or update @param a_pKey Key to add or update. @param a_bValue Value to set. @param a_pComment Comment to be associated with the key. See the notes on SetValue() for comments. @param a_bForceReplace Should all existing values in a multi-key INI file be replaced with this entry. This option has no effect if not using multi-key files. The difference between Delete/SetBoolValue and SetBoolValue with a_bForceReplace = true, is that the load order and comment will be preserved this way. @return SI_Error See error definitions @return SI_UPDATED Value was updated @return SI_INSERTED Value was inserted */ SI_Error SetBoolValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, bool a_bValue, const SI_CHAR * a_pComment = NULL, bool a_bForceReplace = false ); /** Delete an entire section, or a key from a section. Note that the data returned by GetSection is invalid and must not be used after anything has been deleted from that section using this method. Note when multiple keys is enabled, this will delete all keys with that name; there is no way to selectively delete individual key/values in this situation. @param a_pSection Section to delete key from, or if a_pKey is NULL, the section to remove. @param a_pKey Key to remove from the section. Set to NULL to remove the entire section. @param a_bRemoveEmpty If the section is empty after this key has been deleted, should the empty section be removed? @return true Key or section was deleted. @return false Key or section was not found. */ bool Delete( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, bool a_bRemoveEmpty = false ); /*-----------------------------------------------------------------------*/ /** @} @{ @name Converter */ /** Return a conversion object to convert text to the same encoding as is used by the Save(), SaveFile() and SaveString() functions. Use this to prepare the strings that you wish to append or prepend to the output INI data. */ Converter GetConverter() const { return Converter(m_bStoreIsUtf8); } /*-----------------------------------------------------------------------*/ /** @} */ private: // copying is not permitted CSimpleIniTempl(const CSimpleIniTempl &); // disabled CSimpleIniTempl & operator=(const CSimpleIniTempl &); // disabled /** Parse the data looking for a file comment and store it if found. */ SI_Error FindFileComment( SI_CHAR *& a_pData, bool a_bCopyStrings ); /** Parse the data looking for the next valid entry. The memory pointed to by a_pData is modified by inserting NULL characters. The pointer is updated to the current location in the block of text. */ bool FindEntry( SI_CHAR *& a_pData, const SI_CHAR *& a_pSection, const SI_CHAR *& a_pKey, const SI_CHAR *& a_pVal, const SI_CHAR *& a_pComment ) const; /** Add the section/key/value to our data. @param a_pSection Section name. Sections will be created if they don't already exist. @param a_pKey Key name. May be NULL to create an empty section. Existing entries will be updated. New entries will be created. @param a_pValue Value for the key. @param a_pComment Comment to be associated with the section or the key. If a_pKey is NULL then it will be associated with the section, otherwise the key. This must be a string in full comment form already (have a comment character starting every line). @param a_bForceReplace Should all existing values in a multi-key INI file be replaced with this entry. This option has no effect if not using multi-key files. The difference between Delete/AddEntry and AddEntry with a_bForceReplace = true, is that the load order and comment will be preserved this way. @param a_bCopyStrings Should copies of the strings be made or not. If false then the pointers will be used as is. */ SI_Error AddEntry( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, const SI_CHAR * a_pValue, const SI_CHAR * a_pComment, bool a_bForceReplace, bool a_bCopyStrings ); /** Is the supplied character a whitespace character? */ inline bool IsSpace(SI_CHAR ch) const { return (ch == ' ' || ch == '\t' || ch == '\r' || ch == '\n'); } /** Does the supplied character start a comment line? */ inline bool IsComment(SI_CHAR ch) const { return (ch == ';' || ch == '#'); } /** Skip over a newline character (or characters) for either DOS or UNIX */ inline void SkipNewLine(SI_CHAR *& a_pData) const { a_pData += (*a_pData == '\r' && *(a_pData+1) == '\n') ? 2 : 1; } /** Make a copy of the supplied string, replacing the original pointer */ SI_Error CopyString(const SI_CHAR *& a_pString); /** Delete a string from the copied strings buffer if necessary */ void DeleteString(const SI_CHAR * a_pString); /** Internal use of our string comparison function */ bool IsLess(const SI_CHAR * a_pLeft, const SI_CHAR * a_pRight) const { const static SI_STRLESS isLess = SI_STRLESS(); return isLess(a_pLeft, a_pRight); } bool IsMultiLineTag(const SI_CHAR * a_pData) const; bool IsMultiLineData(const SI_CHAR * a_pData) const; bool LoadMultiLineText( SI_CHAR *& a_pData, const SI_CHAR *& a_pVal, const SI_CHAR * a_pTagName, bool a_bAllowBlankLinesInComment = false ) const; bool IsNewLineChar(SI_CHAR a_c) const; bool OutputMultiLineText( OutputWriter & a_oOutput, Converter & a_oConverter, const SI_CHAR * a_pText ) const; private: /** Copy of the INI file data in our character format. This will be modified when parsed to have NULL characters added after all interesting string entries. All of the string pointers to sections, keys and values point into this block of memory. */ SI_CHAR * m_pData; /** Length of the data that we have stored. Used when deleting strings to determine if the string is stored here or in the allocated string buffer. */ size_t m_uDataLen; /** File comment for this data, if one exists. */ const SI_CHAR * m_pFileComment; /** Parsed INI data. Section -> (Key -> Value). */ TSection m_data; /** This vector stores allocated memory for copies of strings that have been supplied after the file load. It will be empty unless SetValue() has been called. */ TNamesDepend m_strings; /** Is the format of our datafile UTF-8 or MBCS? */ bool m_bStoreIsUtf8; /** Are multiple values permitted for the same key? */ bool m_bAllowMultiKey; /** Are data values permitted to span multiple lines? */ bool m_bAllowMultiLine; /** Should spaces be written out surrounding the equals sign? */ bool m_bSpaces; /** Next order value, used to ensure sections and keys are output in the same order that they are loaded/added. */ int m_nOrder; }; // --------------------------------------------------------------------------- // IMPLEMENTATION // --------------------------------------------------------------------------- template CSimpleIniTempl::CSimpleIniTempl( bool a_bIsUtf8, bool a_bAllowMultiKey, bool a_bAllowMultiLine ) : m_pData(0) , m_uDataLen(0) , m_pFileComment(NULL) , m_bStoreIsUtf8(a_bIsUtf8) , m_bAllowMultiKey(a_bAllowMultiKey) , m_bAllowMultiLine(a_bAllowMultiLine) , m_bSpaces(true) , m_nOrder(0) { } template CSimpleIniTempl::~CSimpleIniTempl() { Reset(); } template void CSimpleIniTempl::Reset() { // remove all data delete[] m_pData; m_pData = NULL; m_uDataLen = 0; m_pFileComment = NULL; if (!m_data.empty()) { m_data.erase(m_data.begin(), m_data.end()); } // remove all strings if (!m_strings.empty()) { typename TNamesDepend::iterator i = m_strings.begin(); for (; i != m_strings.end(); ++i) { delete[] const_cast(i->pItem); } m_strings.erase(m_strings.begin(), m_strings.end()); } } template SI_Error CSimpleIniTempl::LoadFile( const char * a_pszFile ) { FILE * fp = NULL; #if __STDC_WANT_SECURE_LIB__ && !_WIN32_WCE fopen_s(&fp, a_pszFile, "rb"); #else // !__STDC_WANT_SECURE_LIB__ fp = fopen(a_pszFile, "rb"); #endif // __STDC_WANT_SECURE_LIB__ if (!fp) { return SI_FILE; } SI_Error rc = LoadFile(fp); fclose(fp); return rc; } #ifdef SI_HAS_WIDE_FILE template SI_Error CSimpleIniTempl::LoadFile( const SI_WCHAR_T * a_pwszFile ) { #ifdef _WIN32 FILE * fp = NULL; #if __STDC_WANT_SECURE_LIB__ && !_WIN32_WCE _wfopen_s(&fp, a_pwszFile, L"rb"); #else // !__STDC_WANT_SECURE_LIB__ fp = _wfopen(a_pwszFile, L"rb"); #endif // __STDC_WANT_SECURE_LIB__ if (!fp) return SI_FILE; SI_Error rc = LoadFile(fp); fclose(fp); return rc; #else // !_WIN32 (therefore SI_CONVERT_ICU) char szFile[256]; u_austrncpy(szFile, a_pwszFile, sizeof(szFile)); return LoadFile(szFile); #endif // _WIN32 } #endif // SI_HAS_WIDE_FILE template SI_Error CSimpleIniTempl::LoadFile( FILE * a_fpFile ) { // load the raw file data int retval = fseek(a_fpFile, 0, SEEK_END); if (retval != 0) { return SI_FILE; } long lSize = ftell(a_fpFile); if (lSize < 0) { return SI_FILE; } if (lSize == 0) { return SI_OK; } // allocate and ensure NULL terminated char * pData = new char[lSize+1]; if (!pData) { return SI_NOMEM; } pData[lSize] = 0; // load data into buffer fseek(a_fpFile, 0, SEEK_SET); size_t uRead = fread(pData, sizeof(char), lSize, a_fpFile); if (uRead != (size_t) lSize) { delete[] pData; return SI_FILE; } // convert the raw data to unicode SI_Error rc = LoadData(pData, uRead); delete[] pData; return rc; } template SI_Error CSimpleIniTempl::LoadData( const char * a_pData, size_t a_uDataLen ) { SI_CONVERTER converter(m_bStoreIsUtf8); if (a_uDataLen == 0) { return SI_OK; } // consume the UTF-8 BOM if it exists if (m_bStoreIsUtf8 && a_uDataLen >= 3) { if (memcmp(a_pData, SI_UTF8_SIGNATURE, 3) == 0) { a_pData += 3; a_uDataLen -= 3; } } // determine the length of the converted data size_t uLen = converter.SizeFromStore(a_pData, a_uDataLen); if (uLen == (size_t)(-1)) { return SI_FAIL; } // allocate memory for the data, ensure that there is a NULL // terminator wherever the converted data ends SI_CHAR * pData = new SI_CHAR[uLen+1]; if (!pData) { return SI_NOMEM; } memset(pData, 0, sizeof(SI_CHAR)*(uLen+1)); // convert the data if (!converter.ConvertFromStore(a_pData, a_uDataLen, pData, uLen)) { delete[] pData; return SI_FAIL; } // parse it const static SI_CHAR empty = 0; SI_CHAR * pWork = pData; const SI_CHAR * pSection = ∅ const SI_CHAR * pItem = NULL; const SI_CHAR * pVal = NULL; const SI_CHAR * pComment = NULL; // We copy the strings if we are loading data into this class when we // already have stored some. bool bCopyStrings = (m_pData != NULL); // find a file comment if it exists, this is a comment that starts at the // beginning of the file and continues until the first blank line. SI_Error rc = FindFileComment(pWork, bCopyStrings); if (rc < 0) return rc; // add every entry in the file to the data table while (FindEntry(pWork, pSection, pItem, pVal, pComment)) { rc = AddEntry(pSection, pItem, pVal, pComment, false, bCopyStrings); if (rc < 0) return rc; } // store these strings if we didn't copy them if (bCopyStrings) { delete[] pData; } else { m_pData = pData; m_uDataLen = uLen+1; } return SI_OK; } #ifdef SI_SUPPORT_IOSTREAMS template SI_Error CSimpleIniTempl::LoadData( std::istream & a_istream ) { std::string strData; char szBuf[512]; do { a_istream.get(szBuf, sizeof(szBuf), '\0'); strData.append(szBuf); } while (a_istream.good()); return LoadData(strData); } #endif // SI_SUPPORT_IOSTREAMS template SI_Error CSimpleIniTempl::FindFileComment( SI_CHAR *& a_pData, bool a_bCopyStrings ) { // there can only be a single file comment if (m_pFileComment) { return SI_OK; } // Load the file comment as multi-line text, this will modify all of // the newline characters to be single \n chars if (!LoadMultiLineText(a_pData, m_pFileComment, NULL, false)) { return SI_OK; } // copy the string if necessary if (a_bCopyStrings) { SI_Error rc = CopyString(m_pFileComment); if (rc < 0) return rc; } return SI_OK; } template bool CSimpleIniTempl::FindEntry( SI_CHAR *& a_pData, const SI_CHAR *& a_pSection, const SI_CHAR *& a_pKey, const SI_CHAR *& a_pVal, const SI_CHAR *& a_pComment ) const { a_pComment = NULL; SI_CHAR * pTrail = NULL; while (*a_pData) { // skip spaces and empty lines while (*a_pData && IsSpace(*a_pData)) { ++a_pData; } if (!*a_pData) { break; } // skip processing of comment lines but keep a pointer to // the start of the comment. if (IsComment(*a_pData)) { LoadMultiLineText(a_pData, a_pComment, NULL, true); continue; } // process section names if (*a_pData == '[') { // skip leading spaces ++a_pData; while (*a_pData && IsSpace(*a_pData)) { ++a_pData; } // find the end of the section name (it may contain spaces) // and convert it to lowercase as necessary a_pSection = a_pData; while (*a_pData && *a_pData != ']' && !IsNewLineChar(*a_pData)) { ++a_pData; } // if it's an invalid line, just skip it if (*a_pData != ']') { continue; } // remove trailing spaces from the section pTrail = a_pData - 1; while (pTrail >= a_pSection && IsSpace(*pTrail)) { --pTrail; } ++pTrail; *pTrail = 0; // skip to the end of the line ++a_pData; // safe as checked that it == ']' above while (*a_pData && !IsNewLineChar(*a_pData)) { ++a_pData; } a_pKey = NULL; a_pVal = NULL; return true; } // find the end of the key name (it may contain spaces) // and convert it to lowercase as necessary a_pKey = a_pData; while (*a_pData && *a_pData != '=' && !IsNewLineChar(*a_pData)) { ++a_pData; } // if it's an invalid line, just skip it if (*a_pData != '=') { continue; } // empty keys are invalid if (a_pKey == a_pData) { while (*a_pData && !IsNewLineChar(*a_pData)) { ++a_pData; } continue; } // remove trailing spaces from the key pTrail = a_pData - 1; while (pTrail >= a_pKey && IsSpace(*pTrail)) { --pTrail; } ++pTrail; *pTrail = 0; // skip leading whitespace on the value ++a_pData; // safe as checked that it == '=' above while (*a_pData && !IsNewLineChar(*a_pData) && IsSpace(*a_pData)) { ++a_pData; } // find the end of the value which is the end of this line a_pVal = a_pData; while (*a_pData && !IsNewLineChar(*a_pData)) { ++a_pData; } // remove trailing spaces from the value pTrail = a_pData - 1; if (*a_pData) { // prepare for the next round SkipNewLine(a_pData); } while (pTrail >= a_pVal && IsSpace(*pTrail)) { --pTrail; } ++pTrail; *pTrail = 0; // check for multi-line entries if (m_bAllowMultiLine && IsMultiLineTag(a_pVal)) { // skip the "<<<" to get the tag that will end the multiline const SI_CHAR * pTagName = a_pVal + 3; return LoadMultiLineText(a_pData, a_pVal, pTagName); } // return the standard entry return true; } return false; } template bool CSimpleIniTempl::IsMultiLineTag( const SI_CHAR * a_pVal ) const { // check for the "<<<" prefix for a multi-line entry if (*a_pVal++ != '<') return false; if (*a_pVal++ != '<') return false; if (*a_pVal++ != '<') return false; return true; } template bool CSimpleIniTempl::IsMultiLineData( const SI_CHAR * a_pData ) const { // data is multi-line if it has any of the following features: // * whitespace prefix // * embedded newlines // * whitespace suffix // empty string if (!*a_pData) { return false; } // check for prefix if (IsSpace(*a_pData)) { return true; } // embedded newlines while (*a_pData) { if (IsNewLineChar(*a_pData)) { return true; } ++a_pData; } // check for suffix if (IsSpace(*--a_pData)) { return true; } return false; } template bool CSimpleIniTempl::IsNewLineChar( SI_CHAR a_c ) const { return (a_c == '\n' || a_c == '\r'); } template bool CSimpleIniTempl::LoadMultiLineText( SI_CHAR *& a_pData, const SI_CHAR *& a_pVal, const SI_CHAR * a_pTagName, bool a_bAllowBlankLinesInComment ) const { // we modify this data to strip all newlines down to a single '\n' // character. This means that on Windows we need to strip out some // characters which will make the data shorter. // i.e. LINE1-LINE1\r\nLINE2-LINE2\0 will become // LINE1-LINE1\nLINE2-LINE2\0 // The pDataLine entry is the pointer to the location in memory that // the current line needs to start to run following the existing one. // This may be the same as pCurrLine in which case no move is needed. SI_CHAR * pDataLine = a_pData; SI_CHAR * pCurrLine; // value starts at the current line a_pVal = a_pData; // find the end tag. This tag must start in column 1 and be // followed by a newline. No whitespace removal is done while // searching for this tag. SI_CHAR cEndOfLineChar = *a_pData; for(;;) { // if we are loading comments then we need a comment character as // the first character on every line if (!a_pTagName && !IsComment(*a_pData)) { // if we aren't allowing blank lines then we're done if (!a_bAllowBlankLinesInComment) { break; } // if we are allowing blank lines then we only include them // in this comment if another comment follows, so read ahead // to find out. SI_CHAR * pCurr = a_pData; int nNewLines = 0; while (IsSpace(*pCurr)) { if (IsNewLineChar(*pCurr)) { ++nNewLines; SkipNewLine(pCurr); } else { ++pCurr; } } // we have a comment, add the blank lines to the output // and continue processing from here if (IsComment(*pCurr)) { for (; nNewLines > 0; --nNewLines) *pDataLine++ = '\n'; a_pData = pCurr; continue; } // the comment ends here break; } // find the end of this line pCurrLine = a_pData; while (*a_pData && !IsNewLineChar(*a_pData)) ++a_pData; // move this line down to the location that it should be if necessary if (pDataLine < pCurrLine) { size_t nLen = (size_t) (a_pData - pCurrLine); memmove(pDataLine, pCurrLine, nLen * sizeof(SI_CHAR)); pDataLine[nLen] = '\0'; } // end the line with a NULL cEndOfLineChar = *a_pData; *a_pData = 0; // if are looking for a tag then do the check now. This is done before // checking for end of the data, so that if we have the tag at the end // of the data then the tag is removed correctly. if (a_pTagName && (!IsLess(pDataLine, a_pTagName) && !IsLess(a_pTagName, pDataLine))) { break; } // if we are at the end of the data then we just automatically end // this entry and return the current data. if (!cEndOfLineChar) { return true; } // otherwise we need to process this newline to ensure that it consists // of just a single \n character. pDataLine += (a_pData - pCurrLine); *a_pData = cEndOfLineChar; SkipNewLine(a_pData); *pDataLine++ = '\n'; } // if we didn't find a comment at all then return false if (a_pVal == a_pData) { a_pVal = NULL; return false; } // the data (which ends at the end of the last line) needs to be // null-terminated BEFORE before the newline character(s). If the // user wants a new line in the multi-line data then they need to // add an empty line before the tag. *--pDataLine = '\0'; // if looking for a tag and if we aren't at the end of the data, // then move a_pData to the start of the next line. if (a_pTagName && cEndOfLineChar) { SI_ASSERT(IsNewLineChar(cEndOfLineChar)); *a_pData = cEndOfLineChar; SkipNewLine(a_pData); } return true; } template SI_Error CSimpleIniTempl::CopyString( const SI_CHAR *& a_pString ) { size_t uLen = 0; if (sizeof(SI_CHAR) == sizeof(char)) { uLen = strlen((const char *)a_pString); } else if (sizeof(SI_CHAR) == sizeof(wchar_t)) { uLen = wcslen((const wchar_t *)a_pString); } else { for ( ; a_pString[uLen]; ++uLen) /*loop*/ ; } ++uLen; // NULL character SI_CHAR * pCopy = new SI_CHAR[uLen]; if (!pCopy) { return SI_NOMEM; } memcpy(pCopy, a_pString, sizeof(SI_CHAR)*uLen); m_strings.push_back(pCopy); a_pString = pCopy; return SI_OK; } template SI_Error CSimpleIniTempl::AddEntry( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, const SI_CHAR * a_pValue, const SI_CHAR * a_pComment, bool a_bForceReplace, bool a_bCopyStrings ) { SI_Error rc; bool bInserted = false; SI_ASSERT(!a_pComment || IsComment(*a_pComment)); // if we are copying strings then make a copy of the comment now // because we will need it when we add the entry. if (a_bCopyStrings && a_pComment) { rc = CopyString(a_pComment); if (rc < 0) return rc; } // create the section entry if necessary typename TSection::iterator iSection = m_data.find(a_pSection); if (iSection == m_data.end()) { // if the section doesn't exist then we need a copy as the // string needs to last beyond the end of this function if (a_bCopyStrings) { rc = CopyString(a_pSection); if (rc < 0) return rc; } // only set the comment if this is a section only entry Entry oSection(a_pSection, ++m_nOrder); if (a_pComment && (!a_pKey || !a_pValue)) { oSection.pComment = a_pComment; } typename TSection::value_type oEntry(oSection, TKeyVal()); typedef typename TSection::iterator SectionIterator; std::pair i = m_data.insert(oEntry); iSection = i.first; bInserted = true; } if (!a_pKey || !a_pValue) { // section only entries are specified with pItem and pVal as NULL return bInserted ? SI_INSERTED : SI_UPDATED; } // check for existence of the key TKeyVal & keyval = iSection->second; typename TKeyVal::iterator iKey = keyval.find(a_pKey); // remove all existing entries but save the load order and // comment of the first entry int nLoadOrder = ++m_nOrder; if (iKey != keyval.end() && m_bAllowMultiKey && a_bForceReplace) { const SI_CHAR * pComment = NULL; while (iKey != keyval.end() && !IsLess(a_pKey, iKey->first.pItem)) { if (iKey->first.nOrder < nLoadOrder) { nLoadOrder = iKey->first.nOrder; pComment = iKey->first.pComment; } ++iKey; } if (pComment) { DeleteString(a_pComment); a_pComment = pComment; CopyString(a_pComment); } Delete(a_pSection, a_pKey); iKey = keyval.end(); } // make string copies if necessary bool bForceCreateNewKey = m_bAllowMultiKey && !a_bForceReplace; if (a_bCopyStrings) { if (bForceCreateNewKey || iKey == keyval.end()) { // if the key doesn't exist then we need a copy as the // string needs to last beyond the end of this function // because we will be inserting the key next rc = CopyString(a_pKey); if (rc < 0) return rc; } // we always need a copy of the value rc = CopyString(a_pValue); if (rc < 0) return rc; } // create the key entry if (iKey == keyval.end() || bForceCreateNewKey) { Entry oKey(a_pKey, nLoadOrder); if (a_pComment) { oKey.pComment = a_pComment; } typename TKeyVal::value_type oEntry(oKey, static_cast(NULL)); iKey = keyval.insert(oEntry); bInserted = true; } iKey->second = a_pValue; return bInserted ? SI_INSERTED : SI_UPDATED; } template const SI_CHAR * CSimpleIniTempl::GetValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, const SI_CHAR * a_pDefault, bool * a_pHasMultiple ) const { if (a_pHasMultiple) { *a_pHasMultiple = false; } if (!a_pSection || !a_pKey) { return a_pDefault; } typename TSection::const_iterator iSection = m_data.find(a_pSection); if (iSection == m_data.end()) { return a_pDefault; } typename TKeyVal::const_iterator iKeyVal = iSection->second.find(a_pKey); if (iKeyVal == iSection->second.end()) { return a_pDefault; } // check for multiple entries with the same key if (m_bAllowMultiKey && a_pHasMultiple) { typename TKeyVal::const_iterator iTemp = iKeyVal; if (++iTemp != iSection->second.end()) { if (!IsLess(a_pKey, iTemp->first.pItem)) { *a_pHasMultiple = true; } } } return iKeyVal->second; } template long CSimpleIniTempl::GetLongValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, long a_nDefault, bool * a_pHasMultiple ) const { // return the default if we don't have a value const SI_CHAR * pszValue = GetValue(a_pSection, a_pKey, NULL, a_pHasMultiple); if (!pszValue || !*pszValue) return a_nDefault; // convert to UTF-8/MBCS which for a numeric value will be the same as ASCII char szValue[64] = { 0 }; SI_CONVERTER c(m_bStoreIsUtf8); if (!c.ConvertToStore(pszValue, szValue, sizeof(szValue))) { return a_nDefault; } // handle the value as hex if prefaced with "0x" long nValue = a_nDefault; char * pszSuffix = szValue; if (szValue[0] == '0' && (szValue[1] == 'x' || szValue[1] == 'X')) { if (!szValue[2]) return a_nDefault; nValue = strtol(&szValue[2], &pszSuffix, 16); } else { nValue = strtol(szValue, &pszSuffix, 10); } // any invalid strings will return the default value if (*pszSuffix) { return a_nDefault; } return nValue; } template SI_Error CSimpleIniTempl::SetLongValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, long a_nValue, const SI_CHAR * a_pComment, bool a_bUseHex, bool a_bForceReplace ) { // use SetValue to create sections if (!a_pSection || !a_pKey) return SI_FAIL; // convert to an ASCII string char szInput[64]; #if __STDC_WANT_SECURE_LIB__ && !_WIN32_WCE sprintf_s(szInput, a_bUseHex ? "0x%lx" : "%ld", a_nValue); #else // !__STDC_WANT_SECURE_LIB__ sprintf(szInput, a_bUseHex ? "0x%lx" : "%ld", a_nValue); #endif // __STDC_WANT_SECURE_LIB__ // convert to output text SI_CHAR szOutput[64]; SI_CONVERTER c(m_bStoreIsUtf8); c.ConvertFromStore(szInput, strlen(szInput) + 1, szOutput, sizeof(szOutput) / sizeof(SI_CHAR)); // actually add it return AddEntry(a_pSection, a_pKey, szOutput, a_pComment, a_bForceReplace, true); } template double CSimpleIniTempl::GetDoubleValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, double a_nDefault, bool * a_pHasMultiple ) const { // return the default if we don't have a value const SI_CHAR * pszValue = GetValue(a_pSection, a_pKey, NULL, a_pHasMultiple); if (!pszValue || !*pszValue) return a_nDefault; // convert to UTF-8/MBCS which for a numeric value will be the same as ASCII char szValue[64] = { 0 }; SI_CONVERTER c(m_bStoreIsUtf8); if (!c.ConvertToStore(pszValue, szValue, sizeof(szValue))) { return a_nDefault; } char * pszSuffix = NULL; double nValue = strtod(szValue, &pszSuffix); // any invalid strings will return the default value if (!pszSuffix || *pszSuffix) { return a_nDefault; } return nValue; } template SI_Error CSimpleIniTempl::SetDoubleValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, double a_nValue, const SI_CHAR * a_pComment, bool a_bForceReplace ) { // use SetValue to create sections if (!a_pSection || !a_pKey) return SI_FAIL; // convert to an ASCII string char szInput[64]; #if __STDC_WANT_SECURE_LIB__ && !_WIN32_WCE sprintf_s(szInput, "%f", a_nValue); #else // !__STDC_WANT_SECURE_LIB__ sprintf(szInput, "%f", a_nValue); #endif // __STDC_WANT_SECURE_LIB__ // convert to output text SI_CHAR szOutput[64]; SI_CONVERTER c(m_bStoreIsUtf8); c.ConvertFromStore(szInput, strlen(szInput) + 1, szOutput, sizeof(szOutput) / sizeof(SI_CHAR)); // actually add it return AddEntry(a_pSection, a_pKey, szOutput, a_pComment, a_bForceReplace, true); } template bool CSimpleIniTempl::GetBoolValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, bool a_bDefault, bool * a_pHasMultiple ) const { // return the default if we don't have a value const SI_CHAR * pszValue = GetValue(a_pSection, a_pKey, NULL, a_pHasMultiple); if (!pszValue || !*pszValue) return a_bDefault; // we only look at the minimum number of characters switch (pszValue[0]) { case 't': case 'T': // true case 'y': case 'Y': // yes case '1': // 1 (one) return true; case 'f': case 'F': // false case 'n': case 'N': // no case '0': // 0 (zero) return false; case 'o': case 'O': if (pszValue[1] == 'n' || pszValue[1] == 'N') return true; // on if (pszValue[1] == 'f' || pszValue[1] == 'F') return false; // off break; } // no recognized value, return the default return a_bDefault; } template SI_Error CSimpleIniTempl::SetBoolValue( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, bool a_bValue, const SI_CHAR * a_pComment, bool a_bForceReplace ) { // use SetValue to create sections if (!a_pSection || !a_pKey) return SI_FAIL; // convert to an ASCII string const char * pszInput = a_bValue ? "true" : "false"; // convert to output text SI_CHAR szOutput[64]; SI_CONVERTER c(m_bStoreIsUtf8); c.ConvertFromStore(pszInput, strlen(pszInput) + 1, szOutput, sizeof(szOutput) / sizeof(SI_CHAR)); // actually add it return AddEntry(a_pSection, a_pKey, szOutput, a_pComment, a_bForceReplace, true); } template bool CSimpleIniTempl::GetAllValues( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, TNamesDepend & a_values ) const { a_values.clear(); if (!a_pSection || !a_pKey) { return false; } typename TSection::const_iterator iSection = m_data.find(a_pSection); if (iSection == m_data.end()) { return false; } typename TKeyVal::const_iterator iKeyVal = iSection->second.find(a_pKey); if (iKeyVal == iSection->second.end()) { return false; } // insert all values for this key a_values.push_back(Entry(iKeyVal->second, iKeyVal->first.pComment, iKeyVal->first.nOrder)); if (m_bAllowMultiKey) { ++iKeyVal; while (iKeyVal != iSection->second.end() && !IsLess(a_pKey, iKeyVal->first.pItem)) { a_values.push_back(Entry(iKeyVal->second, iKeyVal->first.pComment, iKeyVal->first.nOrder)); ++iKeyVal; } } return true; } template int CSimpleIniTempl::GetSectionSize( const SI_CHAR * a_pSection ) const { if (!a_pSection) { return -1; } typename TSection::const_iterator iSection = m_data.find(a_pSection); if (iSection == m_data.end()) { return -1; } const TKeyVal & section = iSection->second; // if multi-key isn't permitted then the section size is // the number of keys that we have. if (!m_bAllowMultiKey || section.empty()) { return (int) section.size(); } // otherwise we need to count them int nCount = 0; const SI_CHAR * pLastKey = NULL; typename TKeyVal::const_iterator iKeyVal = section.begin(); for (int n = 0; iKeyVal != section.end(); ++iKeyVal, ++n) { if (!pLastKey || IsLess(pLastKey, iKeyVal->first.pItem)) { ++nCount; pLastKey = iKeyVal->first.pItem; } } return nCount; } template const typename CSimpleIniTempl::TKeyVal * CSimpleIniTempl::GetSection( const SI_CHAR * a_pSection ) const { if (a_pSection) { typename TSection::const_iterator i = m_data.find(a_pSection); if (i != m_data.end()) { return &(i->second); } } return 0; } template void CSimpleIniTempl::GetAllSections( TNamesDepend & a_names ) const { a_names.clear(); typename TSection::const_iterator i = m_data.begin(); for (int n = 0; i != m_data.end(); ++i, ++n ) { a_names.push_back(i->first); } } template bool CSimpleIniTempl::GetAllKeys( const SI_CHAR * a_pSection, TNamesDepend & a_names ) const { a_names.clear(); if (!a_pSection) { return false; } typename TSection::const_iterator iSection = m_data.find(a_pSection); if (iSection == m_data.end()) { return false; } const TKeyVal & section = iSection->second; const SI_CHAR * pLastKey = NULL; typename TKeyVal::const_iterator iKeyVal = section.begin(); for (int n = 0; iKeyVal != section.end(); ++iKeyVal, ++n ) { if (!pLastKey || IsLess(pLastKey, iKeyVal->first.pItem)) { a_names.push_back(iKeyVal->first); pLastKey = iKeyVal->first.pItem; } } return true; } template SI_Error CSimpleIniTempl::SaveFile( const char * a_pszFile, bool a_bAddSignature ) const { FILE * fp = NULL; #if __STDC_WANT_SECURE_LIB__ && !_WIN32_WCE fopen_s(&fp, a_pszFile, "wb"); #else // !__STDC_WANT_SECURE_LIB__ fp = fopen(a_pszFile, "wb"); #endif // __STDC_WANT_SECURE_LIB__ if (!fp) return SI_FILE; SI_Error rc = SaveFile(fp, a_bAddSignature); fclose(fp); return rc; } #ifdef SI_HAS_WIDE_FILE template SI_Error CSimpleIniTempl::SaveFile( const SI_WCHAR_T * a_pwszFile, bool a_bAddSignature ) const { #ifdef _WIN32 FILE * fp = NULL; #if __STDC_WANT_SECURE_LIB__ && !_WIN32_WCE _wfopen_s(&fp, a_pwszFile, L"wb"); #else // !__STDC_WANT_SECURE_LIB__ fp = _wfopen(a_pwszFile, L"wb"); #endif // __STDC_WANT_SECURE_LIB__ if (!fp) return SI_FILE; SI_Error rc = SaveFile(fp, a_bAddSignature); fclose(fp); return rc; #else // !_WIN32 (therefore SI_CONVERT_ICU) char szFile[256]; u_austrncpy(szFile, a_pwszFile, sizeof(szFile)); return SaveFile(szFile, a_bAddSignature); #endif // _WIN32 } #endif // SI_HAS_WIDE_FILE template SI_Error CSimpleIniTempl::SaveFile( FILE * a_pFile, bool a_bAddSignature ) const { FileWriter writer(a_pFile); return Save(writer, a_bAddSignature); } template SI_Error CSimpleIniTempl::Save( OutputWriter & a_oOutput, bool a_bAddSignature ) const { Converter convert(m_bStoreIsUtf8); // add the UTF-8 signature if it is desired if (m_bStoreIsUtf8 && a_bAddSignature) { a_oOutput.Write(SI_UTF8_SIGNATURE); } // get all of the sections sorted in load order TNamesDepend oSections; GetAllSections(oSections); #if defined(_MSC_VER) && _MSC_VER <= 1200 oSections.sort(); #elif defined(__BORLANDC__) oSections.sort(Entry::LoadOrder()); #else oSections.sort(typename Entry::LoadOrder()); #endif // write the file comment if we have one bool bNeedNewLine = false; if (m_pFileComment) { if (!OutputMultiLineText(a_oOutput, convert, m_pFileComment)) { return SI_FAIL; } bNeedNewLine = true; } // iterate through our sections and output the data typename TNamesDepend::const_iterator iSection = oSections.begin(); for ( ; iSection != oSections.end(); ++iSection ) { // write out the comment if there is one if (iSection->pComment) { if (bNeedNewLine) { a_oOutput.Write(SI_NEWLINE_A); a_oOutput.Write(SI_NEWLINE_A); } if (!OutputMultiLineText(a_oOutput, convert, iSection->pComment)) { return SI_FAIL; } bNeedNewLine = false; } if (bNeedNewLine) { a_oOutput.Write(SI_NEWLINE_A); a_oOutput.Write(SI_NEWLINE_A); bNeedNewLine = false; } // write the section (unless there is no section name) if (*iSection->pItem) { if (!convert.ConvertToStore(iSection->pItem)) { return SI_FAIL; } a_oOutput.Write("["); a_oOutput.Write(convert.Data()); a_oOutput.Write("]"); a_oOutput.Write(SI_NEWLINE_A); } // get all of the keys sorted in load order TNamesDepend oKeys; GetAllKeys(iSection->pItem, oKeys); #if defined(_MSC_VER) && _MSC_VER <= 1200 oKeys.sort(); #elif defined(__BORLANDC__) oKeys.sort(Entry::LoadOrder()); #else oKeys.sort(typename Entry::LoadOrder()); #endif // write all keys and values typename TNamesDepend::const_iterator iKey = oKeys.begin(); for ( ; iKey != oKeys.end(); ++iKey) { // get all values for this key TNamesDepend oValues; GetAllValues(iSection->pItem, iKey->pItem, oValues); typename TNamesDepend::const_iterator iValue = oValues.begin(); for ( ; iValue != oValues.end(); ++iValue) { // write out the comment if there is one if (iValue->pComment) { a_oOutput.Write(SI_NEWLINE_A); if (!OutputMultiLineText(a_oOutput, convert, iValue->pComment)) { return SI_FAIL; } } // write the key if (!convert.ConvertToStore(iKey->pItem)) { return SI_FAIL; } a_oOutput.Write(convert.Data()); // write the value if (!convert.ConvertToStore(iValue->pItem)) { return SI_FAIL; } a_oOutput.Write(m_bSpaces ? " = " : "="); if (m_bAllowMultiLine && IsMultiLineData(iValue->pItem)) { // multi-line data needs to be processed specially to ensure // that we use the correct newline format for the current system a_oOutput.Write("<<pItem)) { return SI_FAIL; } a_oOutput.Write("END_OF_TEXT"); } else { a_oOutput.Write(convert.Data()); } a_oOutput.Write(SI_NEWLINE_A); } } bNeedNewLine = true; } return SI_OK; } template bool CSimpleIniTempl::OutputMultiLineText( OutputWriter & a_oOutput, Converter & a_oConverter, const SI_CHAR * a_pText ) const { const SI_CHAR * pEndOfLine; SI_CHAR cEndOfLineChar = *a_pText; while (cEndOfLineChar) { // find the end of this line pEndOfLine = a_pText; for (; *pEndOfLine && *pEndOfLine != '\n'; ++pEndOfLine) /*loop*/ ; cEndOfLineChar = *pEndOfLine; // temporarily null terminate, convert and output the line *const_cast(pEndOfLine) = 0; if (!a_oConverter.ConvertToStore(a_pText)) { return false; } *const_cast(pEndOfLine) = cEndOfLineChar; a_pText += (pEndOfLine - a_pText) + 1; a_oOutput.Write(a_oConverter.Data()); a_oOutput.Write(SI_NEWLINE_A); } return true; } template bool CSimpleIniTempl::Delete( const SI_CHAR * a_pSection, const SI_CHAR * a_pKey, bool a_bRemoveEmpty ) { if (!a_pSection) { return false; } typename TSection::iterator iSection = m_data.find(a_pSection); if (iSection == m_data.end()) { return false; } // remove a single key if we have a keyname if (a_pKey) { typename TKeyVal::iterator iKeyVal = iSection->second.find(a_pKey); if (iKeyVal == iSection->second.end()) { return false; } // remove any copied strings and then the key typename TKeyVal::iterator iDelete; do { iDelete = iKeyVal++; DeleteString(iDelete->first.pItem); DeleteString(iDelete->second); iSection->second.erase(iDelete); } while (iKeyVal != iSection->second.end() && !IsLess(a_pKey, iKeyVal->first.pItem)); // done now if the section is not empty or we are not pruning away // the empty sections. Otherwise let it fall through into the section // deletion code if (!a_bRemoveEmpty || !iSection->second.empty()) { return true; } } else { // delete all copied strings from this section. The actual // entries will be removed when the section is removed. typename TKeyVal::iterator iKeyVal = iSection->second.begin(); for ( ; iKeyVal != iSection->second.end(); ++iKeyVal) { DeleteString(iKeyVal->first.pItem); DeleteString(iKeyVal->second); } } // delete the section itself DeleteString(iSection->first.pItem); m_data.erase(iSection); return true; } template void CSimpleIniTempl::DeleteString( const SI_CHAR * a_pString ) { // strings may exist either inside the data block, or they will be // individually allocated and stored in m_strings. We only physically // delete those stored in m_strings. if (a_pString < m_pData || a_pString >= m_pData + m_uDataLen) { typename TNamesDepend::iterator i = m_strings.begin(); for (;i != m_strings.end(); ++i) { if (a_pString == i->pItem) { delete[] const_cast(i->pItem); m_strings.erase(i); break; } } } } // --------------------------------------------------------------------------- // CONVERSION FUNCTIONS // --------------------------------------------------------------------------- // Defines the conversion classes for different libraries. Before including // SimpleIni.h, set the converter that you wish you use by defining one of the // following symbols. // // SI_CONVERT_GENERIC Use the Unicode reference conversion library in // the accompanying files ConvertUTF.h/c // SI_CONVERT_ICU Use the IBM ICU conversion library. Requires // ICU headers on include path and icuuc.lib // SI_CONVERT_WIN32 Use the Win32 API functions for conversion. #if !defined(SI_CONVERT_GENERIC) && !defined(SI_CONVERT_WIN32) && !defined(SI_CONVERT_ICU) # ifdef _WIN32 # define SI_CONVERT_WIN32 # else # define SI_CONVERT_GENERIC # endif #endif /** * Generic case-sensitive less than comparison. This class returns numerically * ordered ASCII case-sensitive text for all possible sizes and types of * SI_CHAR. */ template struct SI_GenericCase { bool operator()(const SI_CHAR * pLeft, const SI_CHAR * pRight) const { long cmp; for ( ;*pLeft && *pRight; ++pLeft, ++pRight) { cmp = (long) *pLeft - (long) *pRight; if (cmp != 0) { return cmp < 0; } } return *pRight != 0; } }; /** * Generic ASCII case-insensitive less than comparison. This class returns * numerically ordered ASCII case-insensitive text for all possible sizes * and types of SI_CHAR. It is not safe for MBCS text comparison where * ASCII A-Z characters are used in the encoding of multi-byte characters. */ template struct SI_GenericNoCase { inline SI_CHAR locase(SI_CHAR ch) const { return (ch < 'A' || ch > 'Z') ? ch : (ch - 'A' + 'a'); } bool operator()(const SI_CHAR * pLeft, const SI_CHAR * pRight) const { long cmp; for ( ;*pLeft && *pRight; ++pLeft, ++pRight) { cmp = (long) locase(*pLeft) - (long) locase(*pRight); if (cmp != 0) { return cmp < 0; } } return *pRight != 0; } }; /** * Null conversion class for MBCS/UTF-8 to char (or equivalent). */ template class SI_ConvertA { bool m_bStoreIsUtf8; protected: SI_ConvertA() { } public: SI_ConvertA(bool a_bStoreIsUtf8) : m_bStoreIsUtf8(a_bStoreIsUtf8) { } /* copy and assignment */ SI_ConvertA(const SI_ConvertA & rhs) { operator=(rhs); } SI_ConvertA & operator=(const SI_ConvertA & rhs) { m_bStoreIsUtf8 = rhs.m_bStoreIsUtf8; return *this; } /** Calculate the number of SI_CHAR required for converting the input * from the storage format. The storage format is always UTF-8 or MBCS. * * @param a_pInputData Data in storage format to be converted to SI_CHAR. * @param a_uInputDataLen Length of storage format data in bytes. This * must be the actual length of the data, including * NULL byte if NULL terminated string is required. * @return Number of SI_CHAR required by the string when * converted. If there are embedded NULL bytes in the * input data, only the string up and not including * the NULL byte will be converted. * @return -1 cast to size_t on a conversion error. */ size_t SizeFromStore( const char * a_pInputData, size_t a_uInputDataLen) { (void)a_pInputData; SI_ASSERT(a_uInputDataLen != (size_t) -1); // ASCII/MBCS/UTF-8 needs no conversion return a_uInputDataLen; } /** Convert the input string from the storage format to SI_CHAR. * The storage format is always UTF-8 or MBCS. * * @param a_pInputData Data in storage format to be converted to SI_CHAR. * @param a_uInputDataLen Length of storage format data in bytes. This * must be the actual length of the data, including * NULL byte if NULL terminated string is required. * @param a_pOutputData Pointer to the output buffer to received the * converted data. * @param a_uOutputDataSize Size of the output buffer in SI_CHAR. * @return true if all of the input data was successfully * converted. */ bool ConvertFromStore( const char * a_pInputData, size_t a_uInputDataLen, SI_CHAR * a_pOutputData, size_t a_uOutputDataSize) { // ASCII/MBCS/UTF-8 needs no conversion if (a_uInputDataLen > a_uOutputDataSize) { return false; } memcpy(a_pOutputData, a_pInputData, a_uInputDataLen); return true; } /** Calculate the number of char required by the storage format of this * data. The storage format is always UTF-8 or MBCS. * * @param a_pInputData NULL terminated string to calculate the number of * bytes required to be converted to storage format. * @return Number of bytes required by the string when * converted to storage format. This size always * includes space for the terminating NULL character. * @return -1 cast to size_t on a conversion error. */ size_t SizeToStore( const SI_CHAR * a_pInputData) { // ASCII/MBCS/UTF-8 needs no conversion return strlen((const char *)a_pInputData) + 1; } /** Convert the input string to the storage format of this data. * The storage format is always UTF-8 or MBCS. * * @param a_pInputData NULL terminated source string to convert. All of * the data will be converted including the * terminating NULL character. * @param a_pOutputData Pointer to the buffer to receive the converted * string. * @param a_uOutputDataSize Size of the output buffer in char. * @return true if all of the input data, including the * terminating NULL character was successfully * converted. */ bool ConvertToStore( const SI_CHAR * a_pInputData, char * a_pOutputData, size_t a_uOutputDataSize) { // calc input string length (SI_CHAR type and size independent) size_t uInputLen = strlen((const char *)a_pInputData) + 1; if (uInputLen > a_uOutputDataSize) { return false; } // ascii/UTF-8 needs no conversion memcpy(a_pOutputData, a_pInputData, uInputLen); return true; } }; // --------------------------------------------------------------------------- // SI_CONVERT_GENERIC // --------------------------------------------------------------------------- #ifdef SI_CONVERT_GENERIC #define SI_Case SI_GenericCase #define SI_NoCase SI_GenericNoCase #include #include "ConvertUTF.h" /** * Converts UTF-8 to a wchar_t (or equivalent) using the Unicode reference * library functions. This can be used on all platforms. */ template class SI_ConvertW { bool m_bStoreIsUtf8; protected: SI_ConvertW() { } public: SI_ConvertW(bool a_bStoreIsUtf8) : m_bStoreIsUtf8(a_bStoreIsUtf8) { } /* copy and assignment */ SI_ConvertW(const SI_ConvertW & rhs) { operator=(rhs); } SI_ConvertW & operator=(const SI_ConvertW & rhs) { m_bStoreIsUtf8 = rhs.m_bStoreIsUtf8; return *this; } /** Calculate the number of SI_CHAR required for converting the input * from the storage format. The storage format is always UTF-8 or MBCS. * * @param a_pInputData Data in storage format to be converted to SI_CHAR. * @param a_uInputDataLen Length of storage format data in bytes. This * must be the actual length of the data, including * NULL byte if NULL terminated string is required. * @return Number of SI_CHAR required by the string when * converted. If there are embedded NULL bytes in the * input data, only the string up and not including * the NULL byte will be converted. * @return -1 cast to size_t on a conversion error. */ size_t SizeFromStore( const char * a_pInputData, size_t a_uInputDataLen) { SI_ASSERT(a_uInputDataLen != (size_t) -1); if (m_bStoreIsUtf8) { // worst case scenario for UTF-8 to wchar_t is 1 char -> 1 wchar_t // so we just return the same number of characters required as for // the source text. return a_uInputDataLen; } #if defined(SI_NO_MBSTOWCS_NULL) || (!defined(_MSC_VER) && !defined(_linux)) // fall back processing for platforms that don't support a NULL dest to mbstowcs // worst case scenario is 1:1, this will be a sufficient buffer size (void)a_pInputData; return a_uInputDataLen; #else // get the actual required buffer size return mbstowcs(NULL, a_pInputData, a_uInputDataLen); #endif } /** Convert the input string from the storage format to SI_CHAR. * The storage format is always UTF-8 or MBCS. * * @param a_pInputData Data in storage format to be converted to SI_CHAR. * @param a_uInputDataLen Length of storage format data in bytes. This * must be the actual length of the data, including * NULL byte if NULL terminated string is required. * @param a_pOutputData Pointer to the output buffer to received the * converted data. * @param a_uOutputDataSize Size of the output buffer in SI_CHAR. * @return true if all of the input data was successfully * converted. */ bool ConvertFromStore( const char * a_pInputData, size_t a_uInputDataLen, SI_CHAR * a_pOutputData, size_t a_uOutputDataSize) { if (m_bStoreIsUtf8) { // This uses the Unicode reference implementation to do the // conversion from UTF-8 to wchar_t. The required files are // ConvertUTF.h and ConvertUTF.c which should be included in // the distribution but are publically available from unicode.org // at http://www.unicode.org/Public/PROGRAMS/CVTUTF/ ConversionResult retval; const UTF8 * pUtf8 = (const UTF8 *) a_pInputData; if (sizeof(wchar_t) == sizeof(UTF32)) { UTF32 * pUtf32 = (UTF32 *) a_pOutputData; retval = ConvertUTF8toUTF32( &pUtf8, pUtf8 + a_uInputDataLen, &pUtf32, pUtf32 + a_uOutputDataSize, lenientConversion); } else if (sizeof(wchar_t) == sizeof(UTF16)) { UTF16 * pUtf16 = (UTF16 *) a_pOutputData; retval = ConvertUTF8toUTF16( &pUtf8, pUtf8 + a_uInputDataLen, &pUtf16, pUtf16 + a_uOutputDataSize, lenientConversion); } return retval == conversionOK; } // convert to wchar_t size_t retval = mbstowcs(a_pOutputData, a_pInputData, a_uOutputDataSize); return retval != (size_t)(-1); } /** Calculate the number of char required by the storage format of this * data. The storage format is always UTF-8 or MBCS. * * @param a_pInputData NULL terminated string to calculate the number of * bytes required to be converted to storage format. * @return Number of bytes required by the string when * converted to storage format. This size always * includes space for the terminating NULL character. * @return -1 cast to size_t on a conversion error. */ size_t SizeToStore( const SI_CHAR * a_pInputData) { if (m_bStoreIsUtf8) { // worst case scenario for wchar_t to UTF-8 is 1 wchar_t -> 6 char size_t uLen = 0; while (a_pInputData[uLen]) { ++uLen; } return (6 * uLen) + 1; } else { size_t uLen = wcstombs(NULL, a_pInputData, 0); if (uLen == (size_t)(-1)) { return uLen; } return uLen + 1; // include NULL terminator } } /** Convert the input string to the storage format of this data. * The storage format is always UTF-8 or MBCS. * * @param a_pInputData NULL terminated source string to convert. All of * the data will be converted including the * terminating NULL character. * @param a_pOutputData Pointer to the buffer to receive the converted * string. * @param a_uOutputDataSize Size of the output buffer in char. * @return true if all of the input data, including the * terminating NULL character was successfully * converted. */ bool ConvertToStore( const SI_CHAR * a_pInputData, char * a_pOutputData, size_t a_uOutputDataSize ) { if (m_bStoreIsUtf8) { // calc input string length (SI_CHAR type and size independent) size_t uInputLen = 0; while (a_pInputData[uInputLen]) { ++uInputLen; } ++uInputLen; // include the NULL char // This uses the Unicode reference implementation to do the // conversion from wchar_t to UTF-8. The required files are // ConvertUTF.h and ConvertUTF.c which should be included in // the distribution but are publically available from unicode.org // at http://www.unicode.org/Public/PROGRAMS/CVTUTF/ ConversionResult retval; UTF8 * pUtf8 = (UTF8 *) a_pOutputData; if (sizeof(wchar_t) == sizeof(UTF32)) { const UTF32 * pUtf32 = (const UTF32 *) a_pInputData; retval = ConvertUTF32toUTF8( &pUtf32, pUtf32 + uInputLen, &pUtf8, pUtf8 + a_uOutputDataSize, lenientConversion); } else if (sizeof(wchar_t) == sizeof(UTF16)) { const UTF16 * pUtf16 = (const UTF16 *) a_pInputData; retval = ConvertUTF16toUTF8( &pUtf16, pUtf16 + uInputLen, &pUtf8, pUtf8 + a_uOutputDataSize, lenientConversion); } return retval == conversionOK; } else { size_t retval = wcstombs(a_pOutputData, a_pInputData, a_uOutputDataSize); return retval != (size_t) -1; } } }; #endif // SI_CONVERT_GENERIC // --------------------------------------------------------------------------- // SI_CONVERT_ICU // --------------------------------------------------------------------------- #ifdef SI_CONVERT_ICU #define SI_Case SI_GenericCase #define SI_NoCase SI_GenericNoCase #include /** * Converts MBCS/UTF-8 to UChar using ICU. This can be used on all platforms. */ template class SI_ConvertW { const char * m_pEncoding; UConverter * m_pConverter; protected: SI_ConvertW() : m_pEncoding(NULL), m_pConverter(NULL) { } public: SI_ConvertW(bool a_bStoreIsUtf8) : m_pConverter(NULL) { m_pEncoding = a_bStoreIsUtf8 ? "UTF-8" : NULL; } /* copy and assignment */ SI_ConvertW(const SI_ConvertW & rhs) { operator=(rhs); } SI_ConvertW & operator=(const SI_ConvertW & rhs) { m_pEncoding = rhs.m_pEncoding; m_pConverter = NULL; return *this; } ~SI_ConvertW() { if (m_pConverter) ucnv_close(m_pConverter); } /** Calculate the number of UChar required for converting the input * from the storage format. The storage format is always UTF-8 or MBCS. * * @param a_pInputData Data in storage format to be converted to UChar. * @param a_uInputDataLen Length of storage format data in bytes. This * must be the actual length of the data, including * NULL byte if NULL terminated string is required. * @return Number of UChar required by the string when * converted. If there are embedded NULL bytes in the * input data, only the string up and not including * the NULL byte will be converted. * @return -1 cast to size_t on a conversion error. */ size_t SizeFromStore( const char * a_pInputData, size_t a_uInputDataLen) { SI_ASSERT(a_uInputDataLen != (size_t) -1); UErrorCode nError; if (!m_pConverter) { nError = U_ZERO_ERROR; m_pConverter = ucnv_open(m_pEncoding, &nError); if (U_FAILURE(nError)) { return (size_t) -1; } } nError = U_ZERO_ERROR; int32_t nLen = ucnv_toUChars(m_pConverter, NULL, 0, a_pInputData, (int32_t) a_uInputDataLen, &nError); if (U_FAILURE(nError) && nError != U_BUFFER_OVERFLOW_ERROR) { return (size_t) -1; } return (size_t) nLen; } /** Convert the input string from the storage format to UChar. * The storage format is always UTF-8 or MBCS. * * @param a_pInputData Data in storage format to be converted to UChar. * @param a_uInputDataLen Length of storage format data in bytes. This * must be the actual length of the data, including * NULL byte if NULL terminated string is required. * @param a_pOutputData Pointer to the output buffer to received the * converted data. * @param a_uOutputDataSize Size of the output buffer in UChar. * @return true if all of the input data was successfully * converted. */ bool ConvertFromStore( const char * a_pInputData, size_t a_uInputDataLen, UChar * a_pOutputData, size_t a_uOutputDataSize) { UErrorCode nError; if (!m_pConverter) { nError = U_ZERO_ERROR; m_pConverter = ucnv_open(m_pEncoding, &nError); if (U_FAILURE(nError)) { return false; } } nError = U_ZERO_ERROR; ucnv_toUChars(m_pConverter, a_pOutputData, (int32_t) a_uOutputDataSize, a_pInputData, (int32_t) a_uInputDataLen, &nError); if (U_FAILURE(nError)) { return false; } return true; } /** Calculate the number of char required by the storage format of this * data. The storage format is always UTF-8 or MBCS. * * @param a_pInputData NULL terminated string to calculate the number of * bytes required to be converted to storage format. * @return Number of bytes required by the string when * converted to storage format. This size always * includes space for the terminating NULL character. * @return -1 cast to size_t on a conversion error. */ size_t SizeToStore( const UChar * a_pInputData) { UErrorCode nError; if (!m_pConverter) { nError = U_ZERO_ERROR; m_pConverter = ucnv_open(m_pEncoding, &nError); if (U_FAILURE(nError)) { return (size_t) -1; } } nError = U_ZERO_ERROR; int32_t nLen = ucnv_fromUChars(m_pConverter, NULL, 0, a_pInputData, -1, &nError); if (U_FAILURE(nError) && nError != U_BUFFER_OVERFLOW_ERROR) { return (size_t) -1; } return (size_t) nLen + 1; } /** Convert the input string to the storage format of this data. * The storage format is always UTF-8 or MBCS. * * @param a_pInputData NULL terminated source string to convert. All of * the data will be converted including the * terminating NULL character. * @param a_pOutputData Pointer to the buffer to receive the converted * string. * @param a_pOutputDataSize Size of the output buffer in char. * @return true if all of the input data, including the * terminating NULL character was successfully * converted. */ bool ConvertToStore( const UChar * a_pInputData, char * a_pOutputData, size_t a_uOutputDataSize) { UErrorCode nError; if (!m_pConverter) { nError = U_ZERO_ERROR; m_pConverter = ucnv_open(m_pEncoding, &nError); if (U_FAILURE(nError)) { return false; } } nError = U_ZERO_ERROR; ucnv_fromUChars(m_pConverter, a_pOutputData, (int32_t) a_uOutputDataSize, a_pInputData, -1, &nError); if (U_FAILURE(nError)) { return false; } return true; } }; #endif // SI_CONVERT_ICU // --------------------------------------------------------------------------- // SI_CONVERT_WIN32 // --------------------------------------------------------------------------- #ifdef SI_CONVERT_WIN32 #define SI_Case SI_GenericCase // Windows CE doesn't have errno or MBCS libraries #ifdef _WIN32_WCE # ifndef SI_NO_MBCS # define SI_NO_MBCS # endif #endif #include #ifdef SI_NO_MBCS # define SI_NoCase SI_GenericNoCase #else // !SI_NO_MBCS /** * Case-insensitive comparison class using Win32 MBCS functions. This class * returns a case-insensitive semi-collation order for MBCS text. It may not * be safe for UTF-8 text returned in char format as we don't know what * characters will be folded by the function! Therefore, if you are using * SI_CHAR == char and SetUnicode(true), then you need to use the generic * SI_NoCase class instead. */ #include template struct SI_NoCase { bool operator()(const SI_CHAR * pLeft, const SI_CHAR * pRight) const { if (sizeof(SI_CHAR) == sizeof(char)) { return _mbsicmp((const unsigned char *)pLeft, (const unsigned char *)pRight) < 0; } if (sizeof(SI_CHAR) == sizeof(wchar_t)) { return _wcsicmp((const wchar_t *)pLeft, (const wchar_t *)pRight) < 0; } return SI_GenericNoCase()(pLeft, pRight); } }; #endif // SI_NO_MBCS /** * Converts MBCS and UTF-8 to a wchar_t (or equivalent) on Windows. This uses * only the Win32 functions and doesn't require the external Unicode UTF-8 * conversion library. It will not work on Windows 95 without using Microsoft * Layer for Unicode in your application. */ template class SI_ConvertW { UINT m_uCodePage; protected: SI_ConvertW() { } public: SI_ConvertW(bool a_bStoreIsUtf8) { m_uCodePage = a_bStoreIsUtf8 ? CP_UTF8 : CP_ACP; } /* copy and assignment */ SI_ConvertW(const SI_ConvertW & rhs) { operator=(rhs); } SI_ConvertW & operator=(const SI_ConvertW & rhs) { m_uCodePage = rhs.m_uCodePage; return *this; } /** Calculate the number of SI_CHAR required for converting the input * from the storage format. The storage format is always UTF-8 or MBCS. * * @param a_pInputData Data in storage format to be converted to SI_CHAR. * @param a_uInputDataLen Length of storage format data in bytes. This * must be the actual length of the data, including * NULL byte if NULL terminated string is required. * @return Number of SI_CHAR required by the string when * converted. If there are embedded NULL bytes in the * input data, only the string up and not including * the NULL byte will be converted. * @return -1 cast to size_t on a conversion error. */ size_t SizeFromStore( const char * a_pInputData, size_t a_uInputDataLen) { SI_ASSERT(a_uInputDataLen != (size_t) -1); int retval = MultiByteToWideChar( m_uCodePage, 0, a_pInputData, (int) a_uInputDataLen, 0, 0); return (size_t)(retval > 0 ? retval : -1); } /** Convert the input string from the storage format to SI_CHAR. * The storage format is always UTF-8 or MBCS. * * @param a_pInputData Data in storage format to be converted to SI_CHAR. * @param a_uInputDataLen Length of storage format data in bytes. This * must be the actual length of the data, including * NULL byte if NULL terminated string is required. * @param a_pOutputData Pointer to the output buffer to received the * converted data. * @param a_uOutputDataSize Size of the output buffer in SI_CHAR. * @return true if all of the input data was successfully * converted. */ bool ConvertFromStore( const char * a_pInputData, size_t a_uInputDataLen, SI_CHAR * a_pOutputData, size_t a_uOutputDataSize) { int nSize = MultiByteToWideChar( m_uCodePage, 0, a_pInputData, (int) a_uInputDataLen, (wchar_t *) a_pOutputData, (int) a_uOutputDataSize); return (nSize > 0); } /** Calculate the number of char required by the storage format of this * data. The storage format is always UTF-8. * * @param a_pInputData NULL terminated string to calculate the number of * bytes required to be converted to storage format. * @return Number of bytes required by the string when * converted to storage format. This size always * includes space for the terminating NULL character. * @return -1 cast to size_t on a conversion error. */ size_t SizeToStore( const SI_CHAR * a_pInputData) { int retval = WideCharToMultiByte( m_uCodePage, 0, (const wchar_t *) a_pInputData, -1, 0, 0, 0, 0); return (size_t) (retval > 0 ? retval : -1); } /** Convert the input string to the storage format of this data. * The storage format is always UTF-8 or MBCS. * * @param a_pInputData NULL terminated source string to convert. All of * the data will be converted including the * terminating NULL character. * @param a_pOutputData Pointer to the buffer to receive the converted * string. * @param a_pOutputDataSize Size of the output buffer in char. * @return true if all of the input data, including the * terminating NULL character was successfully * converted. */ bool ConvertToStore( const SI_CHAR * a_pInputData, char * a_pOutputData, size_t a_uOutputDataSize) { int retval = WideCharToMultiByte( m_uCodePage, 0, (const wchar_t *) a_pInputData, -1, a_pOutputData, (int) a_uOutputDataSize, 0, 0); return retval > 0; } }; #endif // SI_CONVERT_WIN32 // --------------------------------------------------------------------------- // TYPE DEFINITIONS // --------------------------------------------------------------------------- typedef CSimpleIniTempl,SI_ConvertA > CSimpleIniA; typedef CSimpleIniTempl,SI_ConvertA > CSimpleIniCaseA; #if defined(SI_CONVERT_ICU) typedef CSimpleIniTempl,SI_ConvertW > CSimpleIniW; typedef CSimpleIniTempl,SI_ConvertW > CSimpleIniCaseW; #else typedef CSimpleIniTempl,SI_ConvertW > CSimpleIniW; typedef CSimpleIniTempl,SI_ConvertW > CSimpleIniCaseW; #endif #ifdef _UNICODE # define CSimpleIni CSimpleIniW # define CSimpleIniCase CSimpleIniCaseW # define SI_NEWLINE SI_NEWLINE_W #else // !_UNICODE # define CSimpleIni CSimpleIniA # define CSimpleIniCase CSimpleIniCaseA # define SI_NEWLINE SI_NEWLINE_A #endif // _UNICODE #ifdef _MSC_VER # pragma warning (pop) #endif #endif // INCLUDED_SimpleIni_h