diff options
| author | Maxim Chudinov <maxim.chudinov@zabbix.com> | 2021-12-18 17:36:41 +0300 |
|---|---|---|
| committer | Maxim Chudinov <maxim.chudinov@zabbix.com> | 2021-12-18 17:36:41 +0300 |
| commit | 385ff06c9cc12861246e37cbce2b15572260586b (patch) | |
| tree | ca83490b630045fc61bf050592691fc8a5384a20 /templates/net/arista_snmp | |
| parent | f513e08c08da0f062d3711de4359869758d67be8 (diff) | |
.........T [DEV-1998] fixed typos and changed README files for Net templates
Diffstat (limited to 'templates/net/arista_snmp')
| -rw-r--r-- | templates/net/arista_snmp/README.md | 98 | ||||
| -rw-r--r-- | templates/net/arista_snmp/template_net_arista_snmp.yaml | 6 |
2 files changed, 52 insertions, 52 deletions
diff --git a/templates/net/arista_snmp/README.md b/templates/net/arista_snmp/README.md index fbb3c36b8c1..67197501166 100644 --- a/templates/net/arista_snmp/README.md +++ b/templates/net/arista_snmp/README.md @@ -3,7 +3,7 @@ ## Overview -For Zabbix version: 5.4 and higher +For Zabbix version: 6.0 and higher This template was tested on: @@ -19,66 +19,66 @@ No specific Zabbix configuration is required. ### Macros used -| Name | Description | Default | -|----------------------------|-----------------------------------------------------------------------------------|------------------| -| {$FAN_CRIT_STATUS} | <p>-</p> | `3` | -| {$MEMORY.NAME.NOT_MATCHES} | <p>Filter is overridden to ignore RAM(Cache) and RAM(Buffers) memory objects.</p> | `(Buffer|Cache)` | -| {$PSU_CRIT_STATUS} | <p>-</p> | `2` | -| {$VFS.FS.PUSED.MAX.CRIT} | <p>-</p> | `95` | -| {$VFS.FS.PUSED.MAX.WARN} | <p>-</p> | `90` | +|Name|Description|Default| +|----|-----------|-------| +|{$FAN_CRIT_STATUS} |<p>-</p> |`3` | +|{$MEMORY.NAME.NOT_MATCHES} |<p>Filter is overridden to ignore RAM(Cache) and RAM(Buffers) memory objects.</p> |`(Buffer|Cache)` | +|{$PSU_CRIT_STATUS} |<p>-</p> |`2` | +|{$VFS.FS.PUSED.MAX.CRIT} |<p>-</p> |`95` | +|{$VFS.FS.PUSED.MAX.WARN} |<p>-</p> |`90` | ## Template links -| Name | -|-------------------------| -| EtherLike-MIB SNMP | -| Generic SNMP | -| HOST-RESOURCES-MIB SNMP | -| Interfaces SNMP | +|Name| +|----| +|HOST-RESOURCES-MIB SNMP | +|EtherLike-MIB SNMP | +|Generic SNMP | +|Interfaces SNMP | ## Discovery rules -| Name | Description | Type | Key and additional info | -|-----------------------|-------------------------------------------------------------------------------|-----------|-----------------------------------------------------------------------------------------------------------------------------------| -| Temperature discovery | <p>ENTITY-SENSORS-MIB::EntitySensorDataType discovery with celsius filter</p> | DEPENDENT | temp.discovery<p>**Filter**:</p>AND <p>- B: {#SENSOR_TYPE} MATCHES_REGEX `8`</p><p>- B: {#SENSOR_PRECISION} MATCHES_REGEX `1`</p> | -| Fan discovery | <p>ENTITY-SENSORS-MIB::EntitySensorDataType discovery with rpm filter</p> | DEPENDENT | fan.discovery<p>**Filter**:</p>OR <p>- B: {#SENSOR_TYPE} MATCHES_REGEX `10`</p> | -| Voltage discovery | <p>ENTITY-SENSORS-MIB::EntitySensorDataType discovery with volts filter</p> | DEPENDENT | voltage.discovery<p>**Filter**:</p>OR <p>- B: {#SENSOR_TYPE} MATCHES_REGEX `3|4`</p> | -| Entity discovery | <p>-</p> | SNMP | entity.discovery<p>**Filter**:</p>AND_OR <p>- A: {#ENT_CLASS} MATCHES_REGEX `3`</p> | -| PSU discovery | <p>-</p> | SNMP | psu.discovery<p>**Filter**:</p>AND_OR <p>- A: {#ENT_CLASS} MATCHES_REGEX `6`</p> | +|Name|Description|Type|Key and additional info| +|----|-----------|----|----| +|Temperature discovery |<p>ENTITY-SENSORS-MIB::EntitySensorDataType discovery with celsius filter</p> |DEPENDENT |temp.discovery<p>**Filter**:</p>AND <p>- {#SENSOR_TYPE} MATCHES_REGEX `8`</p><p>- {#SENSOR_PRECISION} MATCHES_REGEX `1`</p><p>**Overrides:**</p><p>trigger THRESHOLD_LO_WARN<br> - {#THRESHOLD_LO_WARN} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Temperature is below the warning threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_LO_CRIT<br> - {#THRESHOLD_LO_CRIT} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Temperature is below the critical threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_HI_WARN<br> - {#THRESHOLD_HI_WARN} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Temperature is above the warning threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_HI_CRIT<br> - {#THRESHOLD_HI_CRIT} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Temperature is above the critical threshold` - NO_DISCOVER</p> | +|Fan discovery |<p>ENTITY-SENSORS-MIB::EntitySensorDataType discovery with rpm filter</p> |DEPENDENT |fan.discovery<p>**Filter**:</p>OR <p>- {#SENSOR_TYPE} MATCHES_REGEX `10`</p><p>**Overrides:**</p><p>trigger THRESHOLD_LO_WARN<br> - {#THRESHOLD_LO_WARN} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Fan speed is below the warning threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_LO_CRIT<br> - {#THRESHOLD_LO_CRIT} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Fan speed is below the critical threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_HI_WARN<br> - {#THRESHOLD_HI_WARN} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Fan speed is above the warning threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_HI_CRIT<br> - {#THRESHOLD_HI_CRIT} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Fan speed is above the critical threshold` - NO_DISCOVER</p> | +|Voltage discovery |<p>ENTITY-SENSORS-MIB::EntitySensorDataType discovery with volts filter</p> |DEPENDENT |voltage.discovery<p>**Filter**:</p>OR <p>- {#SENSOR_TYPE} MATCHES_REGEX `3|4`</p><p>**Overrides:**</p><p>trigger THRESHOLD_LO_WARN<br> - {#THRESHOLD_LO_WARN} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Voltage is below the warning threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_LO_CRIT<br> - {#THRESHOLD_LO_CRIT} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Voltage is below the critical threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_HI_WARN<br> - {#THRESHOLD_HI_WARN} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Voltage is above the warning threshold` - NO_DISCOVER</p><p>trigger THRESHOLD_HI_CRIT<br> - {#THRESHOLD_HI_CRIT} MATCHES_REGEX `^$`<br> - TRIGGER_PROTOTYPE REGEXP `Voltage is above the critical threshold` - NO_DISCOVER</p> | +|Entity discovery |<p>-</p> |SNMP |entity.discovery<p>**Filter**:</p>AND_OR <p>- {#ENT_CLASS} MATCHES_REGEX `3`</p> | +|PSU discovery |<p>-</p> |SNMP |psu.discovery<p>**Filter**:</p>AND_OR <p>- {#ENT_CLASS} MATCHES_REGEX `6`</p> | ## Items collected -| Group | Name | Description | Type | Key and additional info | -|------------------|-------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------|------------------------------------------------------------------------------------------------------------------------------| -| Fans | {#SENSOR_INFO}: Fan speed | <p>MIB: ENTITY-SENSORS-MIB</p><p>The most recent measurement obtained by the agent for this sensor.</p><p>To correctly interpret the value of this object, the associated entPhySensorType,</p><p>entPhySensorScale, and entPhySensorPrecision objects must also be examined.</p> | SNMP | sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}] | -| Fans | {#SENSOR_INFO}: Fan status | <p>MIB: ENTITY-SENSORS-MIB</p><p>The operational status of the sensor {#SENSOR_INFO}</p> | SNMP | sensor.fan.status[entPhySensorOperStatus.{#SNMPINDEX}] | -| Inventory | {#ENT_NAME}: Hardware model name | <p>MIB: ENTITY-MIB</p> | SNMP | system.hw.model[entPhysicalModelName.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | -| Inventory | {#ENT_NAME}: Hardware serial number | <p>MIB: ENTITY-MIB</p> | SNMP | system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | -| Power_supply | {#ENT_NAME}: Power supply status | <p>MIB: ENTITY-STATE-MIB</p> | SNMP | sensor.psu.status[entStateOper.{#SNMPINDEX}] | -| Temperature | {#SENSOR_INFO}: Temperature | <p>MIB: ENTITY-SENSORS-MIB</p><p>The most recent measurement obtained by the agent for this sensor.</p><p>To correctly interpret the value of this object, the associated entPhySensorType,</p><p>entPhySensorScale, and entPhySensorPrecision objects must also be examined.</p> | SNMP | sensor.temp.value[entPhySensorValue.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.1`</p> | -| Temperature | {#SENSOR_INFO}: Temperature status | <p>MIB: ENTITY-SENSORS-MIB</p><p>The operational status of the sensor {#SENSOR_INFO}</p> | SNMP | sensor.temp.status[entPhySensorOperStatus.{#SNMPINDEX}] | -| Voltage | {#SENSOR_INFO}: Voltage | <p>MIB: ENTITY-SENSORS-MIB</p><p>The most recent measurement obtained by the agent for this sensor.</p><p>To correctly interpret the value of this object, the associated entPhySensorType,</p><p>entPhySensorScale, and entPhySensorPrecision objects must also be examined.</p> | SNMP | sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}] | -| Zabbix_raw_items | Get sensors | <p>Gets sensors with type, description, and thresholds.</p> | SNMP | sensors.get<p>**Preprocessing**:</p><p>- JAVASCRIPT: `Text is too long. Please see the template.`</p> | +|Group|Name|Description|Type|Key and additional info| +|-----|----|-----------|----|---------------------| +|Fans |{#SENSOR_INFO}: Fan speed |<p>MIB: ENTITY-SENSORS-MIB</p><p>The most recent measurement obtained by the agent for this sensor.</p><p>To correctly interpret the value of this object, the associated entPhySensorType,</p><p>entPhySensorScale, and entPhySensorPrecision objects must also be examined.</p> |SNMP |sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}] | +|Fans |{#SENSOR_INFO}: Fan status |<p>MIB: ENTITY-SENSORS-MIB</p><p>The operational status of the sensor {#SENSOR_INFO}</p> |SNMP |sensor.fan.status[entPhySensorOperStatus.{#SNMPINDEX}] | +|Inventory |{#ENT_NAME}: Hardware model name |<p>MIB: ENTITY-MIB</p> |SNMP |system.hw.model[entPhysicalModelName.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Inventory |{#ENT_NAME}: Hardware serial number |<p>MIB: ENTITY-MIB</p> |SNMP |system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Power_supply |{#ENT_NAME}: Power supply status |<p>MIB: ENTITY-STATE-MIB</p> |SNMP |sensor.psu.status[entStateOper.{#SNMPINDEX}] | +|Temperature |{#SENSOR_INFO}: Temperature |<p>MIB: ENTITY-SENSORS-MIB</p><p>The most recent measurement obtained by the agent for this sensor.</p><p>To correctly interpret the value of this object, the associated entPhySensorType,</p><p>entPhySensorScale, and entPhySensorPrecision objects must also be examined.</p> |SNMP |sensor.temp.value[entPhySensorValue.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.1`</p> | +|Temperature |{#SENSOR_INFO}: Temperature status |<p>MIB: ENTITY-SENSORS-MIB</p><p>The operational status of the sensor {#SENSOR_INFO}</p> |SNMP |sensor.temp.status[entPhySensorOperStatus.{#SNMPINDEX}] | +|Voltage |{#SENSOR_INFO}: Voltage |<p>MIB: ENTITY-SENSORS-MIB</p><p>The most recent measurement obtained by the agent for this sensor.</p><p>To correctly interpret the value of this object, the associated entPhySensorType,</p><p>entPhySensorScale, and entPhySensorPrecision objects must also be examined.</p> |SNMP |sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}] | +|Zabbix_raw_items |Get sensors |<p>Gets sensors with type, description, and thresholds.</p> |SNMP |sensors.get<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p> | ## Triggers -| Name | Description | Expression | Severity | Dependencies and additional info | -|----------------------------------------------------------------------------------------------|---------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|----------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------| -| {#SENSOR_INFO}: Fan speed is below the warning threshold of {#THRESHOLD_LO_WARN}rpm for 5m | <p>This trigger uses fan sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}].max(5m)} < {#THRESHOLD_LO_WARN}` | WARNING | <p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p><p>- {#SENSOR_INFO}: Fan speed is below the critical threshold of {#THRESHOLD_LO_CRIT}rpm for 5m</p> | -| {#SENSOR_INFO}: Fan speed is below the critical threshold of {#THRESHOLD_LO_CRIT}rpm for 5m | <p>This trigger uses fan sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}].max(5m)} < {#THRESHOLD_LO_CRIT}` | HIGH | <p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p> | -| {#SENSOR_INFO}: Fan speed is above the warning threshold of {#THRESHOLD_HI_WARN}rpm for 5m | <p>This trigger uses fan sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}].min(5m)} > {#THRESHOLD_HI_WARN}` | WARNING | <p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p><p>- {#SENSOR_INFO}: Fan speed is above the critical threshold of {#THRESHOLD_HI_CRIT}rpm for 5m</p> | -| {#SENSOR_INFO}: Fan speed is above the critical threshold of {#THRESHOLD_HI_CRIT}rpm for 5m | <p>This trigger uses fan sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}].min(5m)} > {#THRESHOLD_HI_CRIT}` | HIGH | <p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p> | -| {#SENSOR_INFO}: Fan is in critical state | <p>Please check the fan unit</p> | `{TEMPLATE_NAME:sensor.fan.status[entPhySensorOperStatus.{#SNMPINDEX}].count(#1,{$FAN_CRIT_STATUS},eq)}=1` | AVERAGE | | -| {#ENT_NAME}: Device has been replaced (new serial number received) | <p>Device serial number has changed. Ack to close</p> | `{TEMPLATE_NAME:system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}].diff()}=1 and {TEMPLATE_NAME:system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}].strlen()}>0` | INFO | <p>Manual close: YES</p> | -| {#ENT_NAME}: Power supply is in critical state | <p>Please check the power supply unit for errors</p> | `{TEMPLATE_NAME:sensor.psu.status[entStateOper.{#SNMPINDEX}].count(#1,{$PSU_CRIT_STATUS},eq)}=1` | AVERAGE | | -| {#SENSOR_INFO}: Temperature is below the warning threshold of {#THRESHOLD_LO_WARN}°C for 5m | <p>This trigger uses temperature sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].max(5m)} < {#THRESHOLD_LO_WARN}` | WARNING | <p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is below the critical threshold of {#THRESHOLD_LO_CRIT}°C for 5m</p> | -| {#SENSOR_INFO}: Temperature is below the critical threshold of {#THRESHOLD_LO_CRIT}°C for 5m | <p>This trigger uses temperature sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].max(5m)} < {#THRESHOLD_LO_CRIT}` | HIGH | | -| {#SENSOR_INFO}: Temperature is above the warning threshold of {#THRESHOLD_HI_WARN}°C for 5m | <p>This trigger uses temperature sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].min(5m)} > {#THRESHOLD_HI_WARN}` | WARNING | <p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is above the critical threshold of {#THRESHOLD_HI_CRIT}°C for 5m</p> | -| {#SENSOR_INFO}: Temperature is above the critical threshold of {#THRESHOLD_HI_CRIT}°C for 5m | <p>This trigger uses temperature sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].min(5m)} > {#THRESHOLD_HI_CRIT}` | HIGH | | -| {#SENSOR_INFO}: Voltage is below the warning threshold of {#THRESHOLD_LO_WARN}V for 5m | <p>This trigger uses voltage sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}].max(5m)} < {#THRESHOLD_LO_WARN}` | WARNING | <p>**Depends on**:</p><p>- {#SENSOR_INFO}: Voltage is below the critical threshold of {#THRESHOLD_LO_CRIT}V for 5m</p> | -| {#SENSOR_INFO}: Voltage is below the critical threshold of {#THRESHOLD_LO_CRIT}V for 5m | <p>This trigger uses voltage sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}].max(5m)} < {#THRESHOLD_LO_CRIT}` | HIGH | | -| {#SENSOR_INFO}: Voltage is above the warning threshold of {#THRESHOLD_HI_WARN}V for 5m | <p>This trigger uses voltage sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}].min(5m)} > {#THRESHOLD_HI_WARN}` | WARNING | <p>**Depends on**:</p><p>- {#SENSOR_INFO}: Voltage is above the critical threshold of {#THRESHOLD_HI_CRIT}V for 5m</p> | -| {#SENSOR_INFO}: Voltage is above the critical threshold of {#THRESHOLD_HI_CRIT}V for 5m | <p>This trigger uses voltage sensor values defined in the device.</p> | `{TEMPLATE_NAME:sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}].min(5m)} > {#THRESHOLD_HI_CRIT}` | HIGH | | +|Name|Description|Expression|Severity|Dependencies and additional info| +|----|-----------|----|----|----| +|{#SENSOR_INFO}: Fan speed is below the warning threshold of {#THRESHOLD_LO_WARN}rpm for 5m |<p>This trigger uses fan sensor values defined in the device.</p> |`max(/Arista SNMP/sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}],5m) < {#THRESHOLD_LO_WARN}` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p><p>- {#SENSOR_INFO}: Fan speed is below the critical threshold of {#THRESHOLD_LO_CRIT}rpm for 5m</p> | +|{#SENSOR_INFO}: Fan speed is below the critical threshold of {#THRESHOLD_LO_CRIT}rpm for 5m |<p>This trigger uses fan sensor values defined in the device.</p> |`max(/Arista SNMP/sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}],5m) < {#THRESHOLD_LO_CRIT}` |HIGH |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p> | +|{#SENSOR_INFO}: Fan speed is above the warning threshold of {#THRESHOLD_HI_WARN}rpm for 5m |<p>This trigger uses fan sensor values defined in the device.</p> |`min(/Arista SNMP/sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}],5m) > {#THRESHOLD_HI_WARN}` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p><p>- {#SENSOR_INFO}: Fan speed is above the critical threshold of {#THRESHOLD_HI_CRIT}rpm for 5m</p> | +|{#SENSOR_INFO}: Fan speed is above the critical threshold of {#THRESHOLD_HI_CRIT}rpm for 5m |<p>This trigger uses fan sensor values defined in the device.</p> |`min(/Arista SNMP/sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}],5m) > {#THRESHOLD_HI_CRIT}` |HIGH |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p> | +|{#SENSOR_INFO}: Fan is in critical state |<p>Please check the fan unit</p> |`count(/Arista SNMP/sensor.fan.status[entPhySensorOperStatus.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS}")=1` |AVERAGE | | +|{#ENT_NAME}: Device has been replaced (new serial number received) |<p>Device serial number has changed. Ack to close</p> |`last(/Arista SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}],#1)<>last(/Arista SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}],#2) and length(last(/Arista SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | +|{#ENT_NAME}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Arista SNMP/sensor.psu.status[entStateOper.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS}")=1` |AVERAGE | | +|{#SENSOR_INFO}: Temperature is below the warning threshold of {#THRESHOLD_LO_WARN}°C for 5m |<p>This trigger uses temperature sensor values defined in the device.</p> |`max(/Arista SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m) < {#THRESHOLD_LO_WARN}` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is below the critical threshold of {#THRESHOLD_LO_CRIT}°C for 5m</p> | +|{#SENSOR_INFO}: Temperature is below the critical threshold of {#THRESHOLD_LO_CRIT}°C for 5m |<p>This trigger uses temperature sensor values defined in the device.</p> |`max(/Arista SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m) < {#THRESHOLD_LO_CRIT}` |HIGH | | +|{#SENSOR_INFO}: Temperature is above the warning threshold of {#THRESHOLD_HI_WARN}°C for 5m |<p>This trigger uses temperature sensor values defined in the device.</p> |`min(/Arista SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m) > {#THRESHOLD_HI_WARN}` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is above the critical threshold of {#THRESHOLD_HI_CRIT}°C for 5m</p> | +|{#SENSOR_INFO}: Temperature is above the critical threshold of {#THRESHOLD_HI_CRIT}°C for 5m |<p>This trigger uses temperature sensor values defined in the device.</p> |`min(/Arista SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m) > {#THRESHOLD_HI_CRIT}` |HIGH | | +|{#SENSOR_INFO}: Voltage is below the warning threshold of {#THRESHOLD_LO_WARN}V for 5m |<p>This trigger uses voltage sensor values defined in the device.</p> |`max(/Arista SNMP/sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}],5m) < {#THRESHOLD_LO_WARN}` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Voltage is below the critical threshold of {#THRESHOLD_LO_CRIT}V for 5m</p> | +|{#SENSOR_INFO}: Voltage is below the critical threshold of {#THRESHOLD_LO_CRIT}V for 5m |<p>This trigger uses voltage sensor values defined in the device.</p> |`max(/Arista SNMP/sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}],5m) < {#THRESHOLD_LO_CRIT}` |HIGH | | +|{#SENSOR_INFO}: Voltage is above the warning threshold of {#THRESHOLD_HI_WARN}V for 5m |<p>This trigger uses voltage sensor values defined in the device.</p> |`min(/Arista SNMP/sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}],5m) > {#THRESHOLD_HI_WARN}` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Voltage is above the critical threshold of {#THRESHOLD_HI_CRIT}V for 5m</p> | +|{#SENSOR_INFO}: Voltage is above the critical threshold of {#THRESHOLD_HI_CRIT}V for 5m |<p>This trigger uses voltage sensor values defined in the device.</p> |`min(/Arista SNMP/sensor.voltage.value[entPhySensorValue.{#SNMPINDEX}],5m) > {#THRESHOLD_HI_CRIT}` |HIGH | | ## Feedback diff --git a/templates/net/arista_snmp/template_net_arista_snmp.yaml b/templates/net/arista_snmp/template_net_arista_snmp.yaml index 2ad49a4cd8c..638a8bd6943 100644 --- a/templates/net/arista_snmp/template_net_arista_snmp.yaml +++ b/templates/net/arista_snmp/template_net_arista_snmp.yaml @@ -1,6 +1,6 @@ zabbix_export: - version: '5.4' - date: '2021-05-11T08:05:14Z' + version: '6.0' + date: '2021-12-17T06:32:37Z' groups: - uuid: 36bff6c29af64692839d077febfc7079 @@ -18,7 +18,7 @@ zabbix_export: ENTITY-STATE-MIB ENTITY-MIB - Template tooling version used: 0.38 + Template tooling version used: 0.40 templates: - name: 'EtherLike-MIB SNMP' |