.........T [ZBX-20003] fixed update and discard intervals in generic snmp and some other templates

2 files changed, 153 insertions, 45 deletions

diff --git a/templates/net/mellanox_snmp/README.md b/templates/net/mellanox_snmp/README.md
index 2659e87b378..cd590a3416a 100644
--- a/templates/net/mellanox_snmp/README.md
+++ b/templates/net/mellanox_snmp/README.md
@@ -3,7 +3,7 @@
 
 ## Overview
 
-For Zabbix version: 5.4 and higher  
+For Zabbix version: 6.0 and higher  
 The updated template for monitoring the Mellanox network switches over SNMP agent. All items collected in one template without any linked templates.
 
 ## Setup
@@ -12,7 +12,7 @@ Refer to the vendor documentation.
 
 ## Zabbix configuration
 
-The template uses context macros for the temperature trigger expression. By default, it uses a macro value like {$TEMP.MAX.CRIT}. To adjust the threshold for a certain sensor you can define context macros on the host level, with a value corresponding to your device specifications, for example: {$TEMP.MAX.CRIT:"MGMT/BOARD_MONITOR"}. Please, read https://www.zabbix.com/documentation/6.0/manual/config/macros/user_macros_context for more detailed info on user context macros.
+The template uses context macros for the temperature trigger expression. By default, it uses a macro value like {$TEMP.MAX.CRIT}. To adjust the threshold for a certain sensor you can define context macros on the host level, with a value corresponding to your device specifications, for example: {$TEMP.MAX.CRIT:"MGMT/BOARD_MONITOR"}. Please, read https://www.zabbix.com/documentation/5.4/manual/config/macros/user_macros_context for more detailed info on user context macros.
 
 ### Macros used
 
@@ -78,17 +78,17 @@ There are no template links in this template.
 |CPU |CPU utilization |<p>MIB: HOST-RESOURCES-MIB</p><p>The average, over the last minute, of the percentage of time that processors was not idle.</p><p>Implementations may approximate this one minute smoothing period if necessary.</p> |SNMP |system.cpu.util<p>**Preprocessing**:</p><p>- JSONPATH: `$..['{#CPU.UTIL}'].avg()`</p> |
 |Fans |{#SENSOR_INFO}: Fan speed |<p>MIB: ENTITY-SENSORS-MIB</p><p>The most recent measurement obtained by the agent for this sensor.</p><p>To correctly interpret the value of this object, the associated entPhySensorType,</p><p>entPhySensorScale, and entPhySensorPrecision objects must also be examined.</p> |SNMP |sensor.fan.speed[entPhySensorValue.{#SNMPINDEX}] |
 |Fans |{#SENSOR_INFO}: Fan status |<p>MIB: ENTITY-SENSORS-MIB</p><p>The operational status of the sensor {#SENSOR_INFO}</p> |SNMP |sensor.fan.status[entPhySensorOperStatus.{#SNMPINDEX}] |
-|General |SNMP traps (fallback) |<p>Item is used to collect all SNMP traps unmatched by other snmptrap items</p> |SNMP_TRAP |snmptrap.fallback |
-|General |System location |<p>MIB: SNMPv2-MIB</p><p>The physical location of this node (e.g., `telephone closet, 3rd floor').  If the location is unknown, the value is the zero-length string.</p> |SNMP |system.location[sysLocation.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> |
-|General |System contact details |<p>MIB: SNMPv2-MIB</p><p>The textual identification of the contact person for this managed node, together with information on how to contact this person.  If no contact information is known, the value is the zero-length string.</p> |SNMP |system.contact[sysContact.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1d`</p> |
-|General |System object ID |<p>MIB: SNMPv2-MIB</p><p>The vendor's authoritative identification of the network management subsystem contained in the entity.  This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed.  For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.</p> |SNMP |system.objectid[sysObjectID.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> |
-|General |System name |<p>MIB: SNMPv2-MIB</p><p>An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name.  If the name is unknown, the value is the zero-length string.</p> |SNMP |system.name<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> |
-|General |System description |<p>MIB: SNMPv2-MIB</p><p>A textual description of the entity. This value should</p><p>include the full name and version identification of the system's hardware type, software operating-system, and</p><p>networking software.</p> |SNMP |system.descr[sysDescr.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1d`</p> |
+|General |SNMP traps (fallback) |<p>The item is used to collect all SNMP traps unmatched by other snmptrap items</p> |SNMP_TRAP |snmptrap.fallback |
+|General |System location |<p>MIB: SNMPv2-MIB</p><p>The physical location of this node (e.g., `telephone closet, 3rd floor').  If the location is unknown, the value is the zero-length string.</p> |SNMP |system.location[sysLocation.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
+|General |System contact details |<p>MIB: SNMPv2-MIB</p><p>The textual identification of the contact person for this managed node, together with information on how to contact this person.  If no contact information is known, the value is the zero-length string.</p> |SNMP |system.contact[sysContact.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
+|General |System object ID |<p>MIB: SNMPv2-MIB</p><p>The vendor's authoritative identification of the network management subsystem contained in the entity.  This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed.  For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.</p> |SNMP |system.objectid[sysObjectID.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
+|General |System name |<p>MIB: SNMPv2-MIB</p><p>An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name.  If the name is unknown, the value is the zero-length string.</p> |SNMP |system.name<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
+|General |System description |<p>MIB: SNMPv2-MIB</p><p>A textual description of the entity. This value should</p><p>include the full name and version identification of the system's hardware type, software operating-system, and</p><p>networking software.</p> |SNMP |system.descr[sysDescr.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
 |Inventory |{#ENT_NAME}: Hardware model name |<p>MIB: ENTITY-MIB</p> |SNMP |system.hw.model[entPhysicalModelName.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1d`</p> |
 |Inventory |{#ENT_NAME}: Hardware serial number |<p>MIB: ENTITY-MIB</p> |SNMP |system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1d`</p> |
 |Memory |{#MEMNAME}: Used memory |<p>MIB: HOST-RESOURCES-MIB</p><p>The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.</p> |SNMP |vm.memory.used[hrStorageUsed.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `{#ALLOC_UNITS}`</p> |
 |Memory |{#MEMNAME}: Total memory |<p>MIB: HOST-RESOURCES-MIB</p><p>The size of the storage represented by this entry, in units of hrStorageAllocationUnits.</p><p>This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.</p><p>For example, the amount of main memory allocated to a buffer pool might be modified or the amount of disk space allocated to virtual memory might be modified.</p> |SNMP |vm.memory.total[hrStorageSize.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `{#ALLOC_UNITS}`</p> |
-|Memory |{#MEMNAME}: Memory utilization |<p>Memory utilization in %</p> |CALCULATED |vm.memory.util[memoryUsedPercentage.{#SNMPINDEX}]<p>**Expression**:</p>`last("vm.memory.used[hrStorageUsed.{#SNMPINDEX}]")/last("vm.memory.total[hrStorageSize.{#SNMPINDEX}]")*100` |
+|Memory |{#MEMNAME}: Memory utilization |<p>Memory utilization in %</p> |CALCULATED |vm.memory.util[memoryUsedPercentage.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[hrStorageUsed.{#SNMPINDEX}])/last(//vm.memory.total[hrStorageSize.{#SNMPINDEX}])*100` |
 |Network_interfaces |Interface {#IFNAME}({#IFALIAS}): Operational status |<p>MIB: IF-MIB</p><p>The current operational state of the interface.</p><p>- The testing(3) state indicates that no operational packet scan be passed</p><p>- If ifAdminStatus is down(2) then ifOperStatus should be down(2)</p><p>- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic</p><p>- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)</p><p>- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state</p><p>- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.</p> |SNMP |net.if.status[ifOperStatus.{#SNMPINDEX}] |
 |Network_interfaces |Interface {#IFNAME}({#IFALIAS}): Bits received |<p>MIB: IF-MIB</p><p>The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.</p> |SNMP |net.if.in[ifHCInOctets.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND<p>- MULTIPLIER: `8`</p> |
 |Network_interfaces |Interface {#IFNAME}({#IFALIAS}): Bits sent |<p>MIB: IF-MIB</p><p>The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.</p> |SNMP |net.if.out[ifHCOutOctets.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND<p>- MULTIPLIER: `8`</p> |
@@ -100,13 +100,13 @@ There are no template links in this template.
 |Network_interfaces |Interface {#IFNAME}({#IFALIAS}): Speed |<p>MIB: IF-MIB</p><p>An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to`n+499,999'.  For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.</p> |SNMP |net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `1000000`</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> |
 |Power_supply |{#ENT_NAME}: Power supply status |<p>MIB: ENTITY-STATE-MIB</p> |SNMP |sensor.psu.status[entStateOper.{#SNMPINDEX}] |
 |Status |Uptime |<p>MIB: SNMPv2-MIB</p><p>The time (in hundredths of a second) since the network management portion of the system was last re-initialized.</p> |SNMP |system.uptime[sysUpTime.0]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.01`</p> |
-|Status |SNMP agent availability |<p>-</p> |INTERNAL |zabbix[host,snmp,available] |
+|Status |SNMP agent availability |<p>Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.</p><p>Possible value:</p><p>0 - not available</p><p>1 - available</p><p>2 - unknown</p> |INTERNAL |zabbix[host,snmp,available] |
 |Status |ICMP ping |<p>-</p> |SIMPLE |icmpping |
 |Status |ICMP loss |<p>-</p> |SIMPLE |icmppingloss |
 |Status |ICMP response time |<p>-</p> |SIMPLE |icmppingsec |
 |Storage |{#FSNAME}: Used space |<p>MIB: HOST-RESOURCES-MIB</p><p>The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.</p> |SNMP |vfs.fs.used[hrStorageUsed.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `{#ALLOC_UNITS}`</p> |
 |Storage |{#FSNAME}: Total space |<p>MIB: HOST-RESOURCES-MIB</p><p>The size of the storage represented by this entry, in units of hrStorageAllocationUnits.</p><p>This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.</p><p>For example, the amount of main storage allocated to a buffer pool might be modified or the amount of disk space allocated to virtual storage might be modified.</p> |SNMP |vfs.fs.total[hrStorageSize.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `{#ALLOC_UNITS}`</p> |
-|Storage |{#FSNAME}: Space utilization |<p>Space utilization in % for {#FSNAME}</p> |CALCULATED |vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}]<p>**Expression**:</p>`(last("vfs.fs.used[hrStorageUsed.{#SNMPINDEX}]")/last("vfs.fs.total[hrStorageSize.{#SNMPINDEX}]"))*100` |
+|Storage |{#FSNAME}: Space utilization |<p>Space utilization in % for {#FSNAME}</p> |CALCULATED |vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}]<p>**Expression**:</p>`(last(//vfs.fs.used[hrStorageUsed.{#SNMPINDEX}])/last(//vfs.fs.total[hrStorageSize.{#SNMPINDEX}]))*100` |
 |Temperature |{#SENSOR_INFO}: Temperature |<p>MIB: ENTITY-SENSORS-MIB</p><p>The most recent measurement obtained by the agent for this sensor.</p><p>To correctly interpret the value of this object, the associated entPhySensorType,</p><p>entPhySensorScale, and entPhySensorPrecision objects must also be examined.</p> |SNMP |sensor.temp.value[entPhySensorValue.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.1`</p> |
 |Temperature |{#SENSOR_INFO}: Temperature status |<p>MIB: ENTITY-SENSORS-MIB</p><p>The operational status of the sensor {#SENSOR_INFO}. Possible values:</p><p>- ok(1) indicates that the agent can obtain the sensor value.</p><p>- unavailable(2) indicates that the agent presently cannot obtain the sensor value.</p><p>- nonoperational(3) indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire), or a soft failure such as out-of-range, jittery, or wildly fluctuating readings.</p> |SNMP |sensor.temp.status[entPhySensorOperStatus.{#SNMPINDEX}] |
 
@@ -114,26 +114,26 @@ There are no template links in this template.
 
 |Name|Description|Expression|Severity|Dependencies and additional info|
 |----|-----------|----|----|----|
-|High CPU utilization (over {$CPU.UTIL.CRIT}% for 5m) |<p>CPU utilization is too high. The system might be slow to respond.</p> |`{TEMPLATE_NAME:system.cpu.util.min(5m)}>{$CPU.UTIL.CRIT}` |WARNING | |
-|{#SENSOR_INFO}: Fan is in critical state |<p>Please check the fan unit</p> |`{TEMPLATE_NAME:sensor.fan.status[entPhySensorOperStatus.{#SNMPINDEX}].count(#1,{$FAN.STATUS.CRIT},eq)}=1` |AVERAGE | |
-|System name has changed (new name: {ITEM.VALUE}) |<p>System name has changed. Ack to close.</p> |`{TEMPLATE_NAME:system.name.diff()}=1 and {TEMPLATE_NAME:system.name.strlen()}>0` |INFO |<p>Manual close: YES</p> |
-|{#ENT_NAME}: Device has been replaced (new serial number received) |<p>Device serial number has changed. Ack to close</p> |`{TEMPLATE_NAME:system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}].diff()}=1 and {TEMPLATE_NAME:system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}].strlen()}>0` |INFO |<p>Manual close: YES</p> |
-|{#MEMNAME}: High memory utilization ( >{$MEMORY.UTIL.MAX}% for 5m) |<p>The system is running out of free memory.</p> |`{TEMPLATE_NAME:vm.memory.util[memoryUsedPercentage.{#SNMPINDEX}].min(5m)}>{$MEMORY.UTIL.MAX}` |AVERAGE | |
-|Interface {#IFNAME}({#IFALIAS}): Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.</p><p>3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`{$IFCONTROL:"{#IFNAME}"}=1 and ({TEMPLATE_NAME:net.if.status[ifOperStatus.{#SNMPINDEX}].last()}=2 and {TEMPLATE_NAME:net.if.status[ifOperStatus.{#SNMPINDEX}].diff()}=1)`<p>Recovery expression:</p>`{TEMPLATE_NAME:net.if.status[ifOperStatus.{#SNMPINDEX}].last()}<>2 or {$IFCONTROL:"{#IFNAME}"}=0` |AVERAGE |<p>Manual close: YES</p> |
-|Interface {#IFNAME}({#IFALIAS}): High bandwidth usage ( > {$IF.UTIL.MAX:"{#IFNAME}"}% ) |<p>The network interface utilization is close to its estimated maximum bandwidth.</p> |`({TEMPLATE_NAME:net.if.in[ifHCInOctets.{#SNMPINDEX}].avg(15m)}>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*{Mellanox SNMP:net.if.speed[ifHighSpeed.{#SNMPINDEX}].last()} or {Mellanox SNMP:net.if.out[ifHCOutOctets.{#SNMPINDEX}].avg(15m)}>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*{Mellanox SNMP:net.if.speed[ifHighSpeed.{#SNMPINDEX}].last()}) and {Mellanox SNMP:net.if.speed[ifHighSpeed.{#SNMPINDEX}].last()}>0`<p>Recovery expression:</p>`{TEMPLATE_NAME:net.if.in[ifHCInOctets.{#SNMPINDEX}].avg(15m)}<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*{Mellanox SNMP:net.if.speed[ifHighSpeed.{#SNMPINDEX}].last()} and {Mellanox SNMP:net.if.out[ifHCOutOctets.{#SNMPINDEX}].avg(15m)}<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*{Mellanox SNMP:net.if.speed[ifHighSpeed.{#SNMPINDEX}].last()}` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> |
-|Interface {#IFNAME}({#IFALIAS}): High error rate ( > {$IF.ERRORS.WARN:"{#IFNAME}"} for 5m) |<p>Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold</p> |`{TEMPLATE_NAME:net.if.in.errors[ifInErrors.{#SNMPINDEX}].min(5m)}>{$IF.ERRORS.WARN:"{#IFNAME}"} or {Mellanox SNMP:net.if.out.errors[ifOutErrors.{#SNMPINDEX}].min(5m)}>{$IF.ERRORS.WARN:"{#IFNAME}"}`<p>Recovery expression:</p>`{TEMPLATE_NAME:net.if.in.errors[ifInErrors.{#SNMPINDEX}].max(5m)}<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 and {Mellanox SNMP:net.if.out.errors[ifOutErrors.{#SNMPINDEX}].max(5m)}<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> |
-|Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before |<p>This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.</p> |`{TEMPLATE_NAME:net.if.speed[ifHighSpeed.{#SNMPINDEX}].change()}<0 and {TEMPLATE_NAME:net.if.speed[ifHighSpeed.{#SNMPINDEX}].last()}>0 and ( {Mellanox SNMP:net.if.type[ifType.{#SNMPINDEX}].last()}=6 or {Mellanox SNMP:net.if.type[ifType.{#SNMPINDEX}].last()}=7 or {Mellanox SNMP:net.if.type[ifType.{#SNMPINDEX}].last()}=11 or {Mellanox SNMP:net.if.type[ifType.{#SNMPINDEX}].last()}=62 or {Mellanox SNMP:net.if.type[ifType.{#SNMPINDEX}].last()}=69 or {Mellanox SNMP:net.if.type[ifType.{#SNMPINDEX}].last()}=117 ) and ({Mellanox SNMP:net.if.status[ifOperStatus.{#SNMPINDEX}].last()}<>2)`<p>Recovery expression:</p>`({TEMPLATE_NAME:net.if.speed[ifHighSpeed.{#SNMPINDEX}].change()}>0 and {TEMPLATE_NAME:net.if.speed[ifHighSpeed.{#SNMPINDEX}].prev()}>0) or ({Mellanox SNMP:net.if.status[ifOperStatus.{#SNMPINDEX}].last()}=2)` |INFO |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> |
-|{#ENT_NAME}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`{TEMPLATE_NAME:sensor.psu.status[entStateOper.{#SNMPINDEX}].count(#1,{$PSU.STATUS.CRIT},eq)}=1` |AVERAGE | |
-|{HOST.NAME} has been restarted (uptime < 10m) |<p>Uptime is less than 10 minutes</p> |`{TEMPLATE_NAME:system.uptime[sysUpTime.0].last()}<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> |
-|No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`{TEMPLATE_NAME:zabbix[host,snmp,available].max({$SNMP.TIMEOUT})}=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> |
-|Unavailable by ICMP ping |<p>Last three attempts returned timeout.  Please check device connectivity.</p> |`{TEMPLATE_NAME:icmpping.max(#3)}=0` |HIGH | |
-|High ICMP ping loss |<p>-</p> |`{TEMPLATE_NAME:icmppingloss.min(5m)}>{$ICMP.LOSS.WARN} and {TEMPLATE_NAME:icmppingloss.min(5m)}<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> |
-|High ICMP ping response time |<p>-</p> |`{TEMPLATE_NAME:icmppingsec.avg(5m)}>{$ICMP.RESPONSE_TIME.WARN}` |WARNING |<p>**Depends on**:</p><p>- High ICMP ping loss</p><p>- Unavailable by ICMP ping</p> |
-|{#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 5G.</p><p> - The disk will be full in less than 24 hours.</p> |`{TEMPLATE_NAME:vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}].last()}>{$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"} and (({Mellanox SNMP:vfs.fs.total[hrStorageSize.{#SNMPINDEX}].last()}-{Mellanox SNMP:vfs.fs.used[hrStorageUsed.{#SNMPINDEX}].last()})<5G or {TEMPLATE_NAME:vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}].timeleft(1h,,100)}<1d)` |AVERAGE |<p>Manual close: YES</p> |
-|{#FSNAME}: Disk space is low (used > {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 10G.</p><p> - The disk will be full in less than 24 hours.</p> |`{TEMPLATE_NAME:vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}].last()}>{$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"} and (({Mellanox SNMP:vfs.fs.total[hrStorageSize.{#SNMPINDEX}].last()}-{Mellanox SNMP:vfs.fs.used[hrStorageUsed.{#SNMPINDEX}].last()})<10G or {TEMPLATE_NAME:vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}].timeleft(1h,,100)}<1d)` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- {#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%)</p> |
-|{#SENSOR_INFO}: Temperature is above warning threshold: >{$TEMP.MAX.WARN:"{#SENSOR_INFO}"} |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].avg(5m)}>{$TEMP.MAX.WARN:"{#SENSOR_INFO}"} or {Mellanox SNMP:sensor.temp.status[entPhySensorOperStatus.{#SNMPINDEX}].last()}={$TEMP.STATUS.WARN}`<p>Recovery expression:</p>`{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].max(5m)}<{$TEMP.MAX.WARN:"{#SENSOR_INFO}"}-3` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is above critical threshold: >{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"}</p> |
-|{#SENSOR_INFO}: Temperature is above critical threshold: >{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"} |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].avg(5m)}>{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"}`<p>Recovery expression:</p>`{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].max(5m)}<{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"}-3` |HIGH | |
-|{#SENSOR_INFO}: Temperature is too low: <{$TEMP.MIN.CRIT:"{#SENSOR_INFO}"} |<p>-</p> |`{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].avg(5m)}<{$TEMP.MIN.CRIT:"{#SENSOR_INFO}"}`<p>Recovery expression:</p>`{TEMPLATE_NAME:sensor.temp.value[entPhySensorValue.{#SNMPINDEX}].min(5m)}>{$TEMP.MIN.CRIT:"{#SENSOR_INFO}"}+3` |AVERAGE | |
+|High CPU utilization (over {$CPU.UTIL.CRIT}% for 5m) |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/Mellanox SNMP/system.cpu.util,5m)>{$CPU.UTIL.CRIT}` |WARNING | |
+|{#SENSOR_INFO}: Fan is in critical state |<p>Please check the fan unit</p> |`count(/Mellanox SNMP/sensor.fan.status[entPhySensorOperStatus.{#SNMPINDEX}],#1,"eq","{$FAN.STATUS.CRIT}")=1` |AVERAGE | |
+|System name has changed (new name: {ITEM.VALUE}) |<p>System name has changed. Ack to close.</p> |`last(/Mellanox SNMP/system.name,#1)<>last(/Mellanox SNMP/system.name,#2) and length(last(/Mellanox SNMP/system.name))>0` |INFO |<p>Manual close: YES</p> |
+|{#ENT_NAME}: Device has been replaced (new serial number received) |<p>Device serial number has changed. Ack to close</p> |`last(/Mellanox SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}],#1)<>last(/Mellanox SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}],#2) and length(last(/Mellanox SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> |
+|{#MEMNAME}: High memory utilization (>{$MEMORY.UTIL.MAX}% for 5m) |<p>The system is running out of free memory.</p> |`min(/Mellanox SNMP/vm.memory.util[memoryUsedPercentage.{#SNMPINDEX}],5m)>{$MEMORY.UTIL.MAX}` |AVERAGE | |
+|Interface {#IFNAME}({#IFALIAS}): Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.</p><p>3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`{$IFCONTROL:"{#IFNAME}"}=1 and last(/Mellanox SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Mellanox SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Mellanox SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))`<p>Recovery expression:</p>`last(/Mellanox SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2 or {$IFCONTROL:"{#IFNAME}"}=0` |AVERAGE |<p>Manual close: YES</p> |
+|Interface {#IFNAME}({#IFALIAS}): High bandwidth usage (>{$IF.UTIL.MAX:"{#IFNAME}"}%) |<p>The network interface utilization is close to its estimated maximum bandwidth.</p> |`(avg(/Mellanox SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Mellanox SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 `<p>Recovery expression:</p>`avg(/Mellanox SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) and avg(/Mellanox SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) ` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> |
+|Interface {#IFNAME}({#IFALIAS}): High error rate (>{$IF.ERRORS.WARN:"{#IFNAME}"} for 5m) |<p>Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold</p> |`min(/Mellanox SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Mellanox SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} `<p>Recovery expression:</p>`max(/Mellanox SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 and max(/Mellanox SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 ` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> |
+|Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before |<p>This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.</p> |`change(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Mellanox SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Mellanox SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Mellanox SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Mellanox SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Mellanox SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Mellanox SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Mellanox SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) `<p>Recovery expression:</p>`(change(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Mellanox SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2) ` |INFO |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> |
+|{#ENT_NAME}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Mellanox SNMP/sensor.psu.status[entStateOper.{#SNMPINDEX}],#1,"eq","{$PSU.STATUS.CRIT}")=1` |AVERAGE | |
+|{HOST.NAME} has been restarted (uptime < 10m) |<p>Uptime is less than 10 minutes</p> |`last(/Mellanox SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> |
+|No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/Mellanox SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> |
+|Unavailable by ICMP ping |<p>Last three attempts returned timeout.  Please check device connectivity.</p> |`max(/Mellanox SNMP/icmpping,#3)=0` |HIGH | |
+|High ICMP ping loss |<p>-</p> |`min(/Mellanox SNMP/icmppingloss,5m)>{$ICMP.LOSS.WARN} and min(/Mellanox SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> |
+|High ICMP ping response time |<p>-</p> |`avg(/Mellanox SNMP/icmppingsec,5m)>{$ICMP.RESPONSE_TIME.WARN}` |WARNING |<p>**Depends on**:</p><p>- High ICMP ping loss</p><p>- Unavailable by ICMP ping</p> |
+|{#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 5G.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/Mellanox SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"} and ((last(/Mellanox SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/Mellanox SNMP/vfs.fs.used[hrStorageUsed.{#SNMPINDEX}]))<5G or timeleft(/Mellanox SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}],1h,100)<1d) ` |AVERAGE |<p>Manual close: YES</p> |
+|{#FSNAME}: Disk space is low (used > {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 10G.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/Mellanox SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"} and ((last(/Mellanox SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/Mellanox SNMP/vfs.fs.used[hrStorageUsed.{#SNMPINDEX}]))<10G or timeleft(/Mellanox SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}],1h,100)<1d) ` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- {#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%)</p> |
+|{#SENSOR_INFO}: Temperature is above warning threshold: >{$TEMP.MAX.WARN:"{#SENSOR_INFO}"} |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Mellanox SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m)>{$TEMP.MAX.WARN:"{#SENSOR_INFO}"} or last(/Mellanox SNMP/sensor.temp.status[entPhySensorOperStatus.{#SNMPINDEX}])={$TEMP.STATUS.WARN} `<p>Recovery expression:</p>`max(/Mellanox SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m)<{$TEMP.MAX.WARN:"{#SENSOR_INFO}"}-3` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is above critical threshold: >{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"}</p> |
+|{#SENSOR_INFO}: Temperature is above critical threshold: >{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"} |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Mellanox SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m)>{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"}`<p>Recovery expression:</p>`max(/Mellanox SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m)<{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"}-3` |HIGH | |
+|{#SENSOR_INFO}: Temperature is too low: <{$TEMP.MIN.CRIT:"{#SENSOR_INFO}"} |<p>-</p> |`avg(/Mellanox SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m)<{$TEMP.MIN.CRIT:"{#SENSOR_INFO}"}`<p>Recovery expression:</p>`min(/Mellanox SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m)>{$TEMP.MIN.CRIT:"{#SENSOR_INFO}"}+3` |AVERAGE | |
 
 ## Feedback
 
diff --git a/templates/net/mellanox_snmp/template_net_mellanox_snmp.yaml b/templates/net/mellanox_snmp/template_net_mellanox_snmp.yaml
index 5581f8b01e5..cfd58f4e779 100644
--- a/templates/net/mellanox_snmp/template_net_mellanox_snmp.yaml
+++ b/templates/net/mellanox_snmp/template_net_mellanox_snmp.yaml
@@ -1,6 +1,6 @@
 zabbix_export:
-  version: '5.4'
-  date: '2021-05-11T08:05:08Z'
+  version: '6.0'
+  date: '2021-10-27T15:19:05Z'
   groups:
     -
       uuid: 36bff6c29af64692839d077febfc7079
@@ -21,7 +21,7 @@ zabbix_export:
         ENTITY-MIB
         IF-MIB
         
-        Template tooling version used: 0.38
+        Template tooling version used: 0.39
       groups:
         -
           name: 'Templates/Network devices'
@@ -102,7 +102,7 @@ zabbix_export:
           history: 2w
           trends: '0'
           value_type: LOG
-          description: 'Item is used to collect all SNMP traps unmatched by other snmptrap items'
+          description: 'The item is used to collect all SNMP traps unmatched by other snmptrap items'
           logtimefmt: 'hh:mm:sszyyyy/MM/dd'
           tags:
             -
@@ -114,7 +114,7 @@ zabbix_export:
           type: SNMP_AGENT
           snmp_oid: 1.3.6.1.2.1.1.4.0
           key: 'system.contact[sysContact.0]'
-          delay: 1h
+          delay: 15m
           history: 2w
           trends: '0'
           value_type: CHAR
@@ -126,7 +126,7 @@ zabbix_export:
             -
               type: DISCARD_UNCHANGED_HEARTBEAT
               parameters:
-                - 1d
+                - 12h
           tags:
             -
               tag: Application
@@ -167,7 +167,7 @@ zabbix_export:
           type: SNMP_AGENT
           snmp_oid: 1.3.6.1.2.1.1.1.0
           key: 'system.descr[sysDescr.0]'
-          delay: 1h
+          delay: 15m
           history: 2w
           trends: '0'
           value_type: CHAR
@@ -180,7 +180,7 @@ zabbix_export:
             -
               type: DISCARD_UNCHANGED_HEARTBEAT
               parameters:
-                - 1d
+                - 12h
           tags:
             -
               tag: Application
@@ -203,7 +203,7 @@ zabbix_export:
             -
               type: DISCARD_UNCHANGED_HEARTBEAT
               parameters:
-                - 1h
+                - 12h
           tags:
             -
               tag: Application
@@ -226,7 +226,7 @@ zabbix_export:
             -
               type: DISCARD_UNCHANGED_HEARTBEAT
               parameters:
-                - 1h
+                - 12h
           tags:
             -
               tag: Application
@@ -256,7 +256,7 @@ zabbix_export:
             -
               type: DISCARD_UNCHANGED_HEARTBEAT
               parameters:
-                - 1h
+                - 12h
           tags:
             -
               tag: Application
@@ -301,6 +301,12 @@ zabbix_export:
           type: INTERNAL
           key: 'zabbix[host,snmp,available]'
           history: 7d
+          description: |
+            Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.
+            Possible value:
+            0 - not available
+            1 - available
+            2 - unknown
           valuemap:
             name: zabbix.host.available
           tags:
@@ -793,7 +799,7 @@ zabbix_export:
               recovery_expression: |
                 avg(/Mellanox SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) and
                 avg(/Mellanox SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/Mellanox SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])
-              name: 'Interface {#IFNAME}({#IFALIAS}): High bandwidth usage ( > {$IF.UTIL.MAX:"{#IFNAME}"}% )'
+              name: 'Interface {#IFNAME}({#IFALIAS}): High bandwidth usage (>{$IF.UTIL.MAX:"{#IFNAME}"}%)'
               opdata: 'In: {ITEM.LASTVALUE1}, out: {ITEM.LASTVALUE3}, speed: {ITEM.LASTVALUE2}'
               priority: WARNING
               description: 'The network interface utilization is close to its estimated maximum bandwidth.'
@@ -812,7 +818,7 @@ zabbix_export:
               recovery_expression: |
                 max(/Mellanox SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8
                 and max(/Mellanox SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8
-              name: 'Interface {#IFNAME}({#IFALIAS}): High error rate ( > {$IF.ERRORS.WARN:"{#IFNAME}"} for 5m)'
+              name: 'Interface {#IFNAME}({#IFALIAS}): High error rate (>{$IF.ERRORS.WARN:"{#IFNAME}"} for 5m)'
               opdata: 'errors in: {ITEM.LASTVALUE1}, errors out: {ITEM.LASTVALUE2}'
               priority: WARNING
               description: 'Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold'
@@ -1269,7 +1275,7 @@ zabbix_export:
                 -
                   uuid: 912430a103414c6eb9c8e55c45246f48
                   expression: 'min(/Mellanox SNMP/vm.memory.util[memoryUsedPercentage.{#SNMPINDEX}],5m)>{$MEMORY.UTIL.MAX}'
-                  name: '{#MEMNAME}: High memory utilization ( >{$MEMORY.UTIL.MAX}% for 5m)'
+                  name: '{#MEMNAME}: High memory utilization (>{$MEMORY.UTIL.MAX}% for 5m)'
                   priority: AVERAGE
                   description: 'The system is running out of free memory.'
           graph_prototypes:
@@ -1419,6 +1425,105 @@ zabbix_export:
         -
           macro: '{$VFS.FS.PUSED.MAX.WARN}'
           value: '80'
+      dashboards:
+        -
+          uuid: 5d189179d9144198b020fce10f645872
+          name: 'Network interfaces'
+          pages:
+            -
+              widgets:
+                -
+                  type: GRAPH_PROTOTYPE
+                  width: '24'
+                  height: '5'
+                  fields:
+                    -
+                      type: INTEGER
+                      name: source_type
+                      value: '2'
+                    -
+                      type: INTEGER
+                      name: columns
+                      value: '1'
+                    -
+                      type: INTEGER
+                      name: rows
+                      value: '1'
+                    -
+                      type: GRAPH_PROTOTYPE
+                      name: graphid
+                      value:
+                        name: 'Interface {#IFNAME}({#IFALIAS}): Network traffic'
+                        host: 'Mellanox SNMP'
+        -
+          uuid: e41382f2a3394e52b885bb6a70df35ff
+          name: 'System performance'
+          pages:
+            -
+              widgets:
+                -
+                  type: GRAPH_CLASSIC
+                  width: '12'
+                  height: '5'
+                  fields:
+                    -
+                      type: INTEGER
+                      name: source_type
+                      value: '0'
+                    -
+                      type: GRAPH
+                      name: graphid
+                      value:
+                        name: 'CPU utilization'
+                        host: 'Mellanox SNMP'
+                -
+                  type: GRAPH_PROTOTYPE
+                  'y': '5'
+                  width: '12'
+                  height: '5'
+                  fields:
+                    -
+                      type: INTEGER
+                      name: source_type
+                      value: '2'
+                    -
+                      type: INTEGER
+                      name: columns
+                      value: '1'
+                    -
+                      type: INTEGER
+                      name: rows
+                      value: '1'
+                    -
+                      type: GRAPH_PROTOTYPE
+                      name: graphid
+                      value:
+                        name: '{#MEMNAME}: Memory utilization'
+                        host: 'Mellanox SNMP'
+                -
+                  type: GRAPH_PROTOTYPE
+                  'y': '10'
+                  width: '12'
+                  height: '5'
+                  fields:
+                    -
+                      type: INTEGER
+                      name: source_type
+                      value: '2'
+                    -
+                      type: INTEGER
+                      name: columns
+                      value: '1'
+                    -
+                      type: INTEGER
+                      name: rows
+                      value: '1'
+                    -
+                      type: GRAPH_PROTOTYPE
+                      name: graphid
+                      value:
+                        name: '{#FSNAME}: Disk space usage'
+                        host: 'Mellanox SNMP'
       valuemaps:
         -
           uuid: d42214398aea4362b4fc61a090f188e1
@@ -1460,6 +1565,9 @@ zabbix_export:
               value: '2'
               newvalue: down
             -
+              value: '3'
+              newvalue: testing
+            -
               value: '4'
               newvalue: unknown
             -