.........T [ZBX-15984] added hardware uptime in SNMP templates

1 files changed, 3 insertions, 2 deletions

diff --git a/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md b/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md
index fe1c824687e..e0791361e20 100644
--- a/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md
+++ b/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md
@@ -75,7 +75,8 @@ There are no template links in this template.
 |Network interfaces |ZYXEL IES1248-51: Port {#SNMPINDEX}: ATUR output power |<p>MIB: ADSL-LINE-MIB</p><p>Measured total output power transmitted by this ATU.</p><p>The Info Atur fields show data acquired from the ATUR (ADSL Termination Unit – Remote), in this case the subscriber's ADSL modem or router, during negotiation/provisioning message interchanges.</p> |SNMP |zyxel.ies1248.net.adsl.atur.outpwr[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.1`</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> |
 |Power supply |ZYXEL IES1248-51: Nominal "{#ZYXEL.VOLT.NOMINAL}" |<p>MIB: ZYXEL-IESCOMMON-MIB</p><p>The current voltage reading.</p> |SNMP |zyxel.ies1248.volt[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.001`</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> |
 |Status |ZYXEL IES1248-51: SNMP agent availability |<p>-</p> |INTERNAL |zabbix[host,snmp,available]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> |
-|Status |ZYXEL IES1248-51: Uptime |<p>MIB: RFC1213-MIB</p><p>The time (in hundredths of a second) since the</p><p>network management portion of the system was last</p><p>re-initialized.</p> |SNMP |zyxel.ies1248.uptime<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.01`</p> |
+|Status |ZYXEL IES1248-51: Uptime (network) |<p>MIB: RFC1213-MIB</p><p>The time (in hundredths of a second) since the</p><p>network management portion of the system was last</p><p>re-initialized.</p> |SNMP |zyxel.ies1248.net.uptime<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.01`</p> |
+|Status |ZYXEL IES1248-51: Uptime (hardware) |<p>MIB: HOST-RESOURCES-MIB</p><p>The amount of time since this host was last initialized.</p><p>Note that this is different from sysUpTime in the SNMPv2-MIB</p><p>[RFC1907] because sysUpTime is the uptime of the</p><p>network management portion of the system.</p> |SNMP |zyxel.ies1248.hw.uptime<p>**Preprocessing**:</p><p>- CHECK_NOT_SUPPORTED</p><p>⛔️ON_FAIL: `CUSTOM_VALUE -> 0`</p><p>- MULTIPLIER: `0.01`</p> |
 |Status |ZYXEL IES1248-51: Alarm status |<p>MIB: ZYXEL-IESCOMMON-MIB</p><p>This variable indicates the alarm status of the module.</p><p>It is a bit map represented a sum, therefore, it can represent</p><p>multiple defects simultaneously. The moduleNoDefect should be set</p><p>if and only if no other flag is set.</p><p>The various bit positions are:</p><p>1   moduleNoDefect</p><p>2   moduleOverHeat</p><p>3   moduleFanRpmLow</p><p>4   moduleVoltageLow</p><p>5   moduleThermalSensorFailure</p><p>6   modulePullOut</p><p>7   powerDC48VAFailure</p><p>8   powerDC48VBFailure</p><p>9   extAlarmInputTrigger</p><p>10   moduleDown</p><p>11   mscSwitchOverOK</p><p>12   networkTopologyChange</p><p>13   macSpoof</p><p>14   cpuHigh</p><p>15   memoryUsageHigh</p><p>16   packetBufferUsageHigh</p><p>17   loopguardOccurence</p> |SNMP |zyxel.ies1248.slot.alarm<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p> |
 |Temperature |ZYXEL IES1248-51: Temperature "{#ZYXEL.TEMP.ID}" |<p>MIB: ZYXEL-IESCOMMON-MIB</p><p>The current temperature measured at this sensor</p> |SNMP |zyxel.ies1248.temp[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> |
 
@@ -95,7 +96,7 @@ There are no template links in this template.
 |ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | |
 |ZYXEL IES1248-51: Voltage {#ZYXEL.VOLT.NOMINAL} is in critical state |<p>Please check the power supply</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW}` |AVERAGE | |
 |ZYXEL IES1248-51: No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/ZYXEL IES1248-51 SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING | |
-|ZYXEL IES1248-51: has been restarted |<p>Uptime is less than 10 minutes.</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.uptime)<10m` |INFO |<p>Manual close: YES</p> |
+|ZYXEL IES1248-51: Host has been restarted |<p>Uptime is less than 10 minutes.</p> |`(last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.hw.uptime)>0 and last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.hw.uptime)<10m) or (last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.hw.uptime)=0 and last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.uptime)<10m)` |INFO |<p>Manual close: YES</p> |
 |ZYXEL IES1248-51: Port {#SNMPINDEX} alarm |<p>The slot reported an error.</p> |`find(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.slot.alarm,,"like","moduleNoDefect")=0` |AVERAGE | |
 |ZYXEL IES1248-51: Temperature {#ZYXEL.TEMP.ID} is in critical state |<p>Please check the temperature</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH}` |AVERAGE | |