.........T [ZBXNEXT-7582] moved threshold information from trigger name to the event name

1 files changed, 6 insertions, 6 deletions

diff --git a/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md b/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md
index 91e3060c95b..d3edc7fef16 100644
--- a/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md
+++ b/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md
@@ -86,16 +86,16 @@ There are no template links in this template.
 |ZYXEL IES1248-51: FAN{#SNMPINDEX} is in critical state |<p>Please check the fan unit</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.fan[{#SNMPINDEX}])<{#ZYXEL.FANRPM.THRESH.LOW}` |AVERAGE | |
 |ZYXEL IES1248-51: Template does not match hardware |<p>This template is for Zyxel IES1248-51, but connected to {ITEM.VALUE}</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.model)<>"IES1248-51"` |INFO | |
 |ZYXEL IES1248-51: Firmware has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.fwversion,#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.fwversion,#2) and length(last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.fwversion))>0` |INFO |<p>Manual close: YES</p> |
-|ZYXEL IES1248-51: Device has been replaced (new serial number received) |<p>Device serial number has changed. Ack to close</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber,#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber,#2) and length(last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber))>0` |INFO |<p>Manual close: YES</p> |
+|ZYXEL IES1248-51: Device has been replaced |<p>Device serial number has changed. Ack to close</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber,#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber,#2) and length(last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber))>0` |INFO |<p>Manual close: YES</p> |
 |ZYXEL IES1248-51: Port {#ZYXEL.IF.NAME}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}],#2)`<p>Recovery expression:</p>`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> |
 |ZYXEL IES1248-51: Port {#SNMPINDEX}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}],#2)`<p>Recovery expression:</p>`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> |
-|ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} (<{$ZYXEL.ADSL.SNR.MIN}dB for 5m) |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atuc.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | |
-|ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} (>{$ZYXEL.ADSL.ATN.MAX}dB for 5m) |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atuc.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | |
-|ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} (<{$ZYXEL.ADSL.SNR.MIN}dB for 5m) |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atur.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | |
-|ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} (>{$ZYXEL.ADSL.ATN.MAX}dB for 5m) |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | |
+|ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atuc.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | |
+|ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atuc.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | |
+|ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atur.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | |
+|ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | |
 |ZYXEL IES1248-51: Voltage {#ZYXEL.VOLT.NOMINAL} is in critical state |<p>Please check the power supply</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW}` |AVERAGE | |
 |ZYXEL IES1248-51: No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/ZYXEL IES1248-51 SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING | |
-|ZYXEL IES1248-51: has been restarted (uptime < 10m) |<p>Uptime is less than 10 minutes</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.uptime)<10m` |INFO |<p>Manual close: YES</p> |
+|ZYXEL IES1248-51: has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.uptime)<10m` |INFO |<p>Manual close: YES</p> |
 |ZYXEL IES1248-51: Port {#SNMPINDEX} alarm |<p>The slot reported an error.</p> |`find(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.slot.alarm,,"like","moduleNoDefect")=0` |AVERAGE | |
 |ZYXEL IES1248-51: Temperature {#ZYXEL.TEMP.ID} is in critical state |<p>Please check the temperature</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH}` |AVERAGE | |