diff options
Diffstat (limited to 'templates/net/arista_snmp/README.md')
| -rw-r--r-- | templates/net/arista_snmp/README.md | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/templates/net/arista_snmp/README.md b/templates/net/arista_snmp/README.md index 06b3268f8f1..f4398f1f4a5 100644 --- a/templates/net/arista_snmp/README.md +++ b/templates/net/arista_snmp/README.md @@ -47,6 +47,8 @@ No specific Zabbix configuration is required. |{$NET.IF.IFTYPE.NOT_MATCHES} |<p>-</p> |`CHANGE_IF_NEEDED` | |{$PSU_CRIT_STATUS} |<p>-</p> |`2` | |{$SNMP.TIMEOUT} |<p>-</p> |`5m` | +|{$VFS.FS.FREE.MIN.CRIT} |<p>The critical threshold of the filesystem utilization.</p> |`5G` | +|{$VFS.FS.FREE.MIN.WARN} |<p>The warning threshold of the filesystem utilization.</p> |`10G` | |{$VFS.FS.FSNAME.MATCHES} |<p>This macro is used in filesystems discovery. Can be overridden on the host or linked template level.</p> |`.+` | |{$VFS.FS.FSNAME.NOT_MATCHES} |<p>This macro is used in filesystems discovery. Can be overridden on the host or linked template level.</p> |`^(/dev|/sys|/run|/proc|.+/shm$)` | |{$VFS.FS.FSTYPE.MATCHES} |<p>This macro is used in filesystems discovery. Can be overridden on the host or linked template level.</p> |`.*(\.4|\.9|hrStorageFixedDisk|hrStorageFlashMemory)$` | @@ -89,7 +91,7 @@ There are no template links in this template. |Inventory |{#ENT_NAME}: Hardware serial number |<p>MIB: ENTITY-MIB</p> |SNMP |system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | |Memory |{#MEMNAME}: Used memory |<p>MIB: HOST-RESOURCES-MIB</p><p>The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.</p> |SNMP |vm.memory.used[hrStorageUsed.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `{#ALLOC_UNITS}`</p> | |Memory |{#MEMNAME}: Total memory |<p>MIB: HOST-RESOURCES-MIB</p><p>The size of the storage represented by this entry, in units of hrStorageAllocationUnits.</p><p>This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.</p><p>For example, the amount of main memory allocated to a buffer pool might be modified or the amount of disk space allocated to virtual memory might be modified.</p> |SNMP |vm.memory.total[hrStorageSize.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `{#ALLOC_UNITS}`</p> | -|Memory |{#MEMNAME}: Memory utilization |<p>Memory utilization in %</p> |CALCULATED |vm.memory.util[memoryUsedPercentage.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[hrStorageUsed.{#SNMPINDEX}])/last(//vm.memory.total[hrStorageSize.{#SNMPINDEX}])*100` | +|Memory |{#MEMNAME}: Memory utilization |<p>Memory utilization in %.</p> |CALCULATED |vm.memory.util[memoryUsedPercentage.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[hrStorageUsed.{#SNMPINDEX}])/last(//vm.memory.total[hrStorageSize.{#SNMPINDEX}])*100` | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Duplex status |<p>MIB: EtherLike-MIB</p><p>The current mode of operation of the MAC</p><p>entity. 'unknown' indicates that the current</p><p>duplex mode could not be determined.</p><p>Management control of the duplex mode is</p><p>accomplished through the MAU MIB. When</p><p>an interface does not support autonegotiation,</p><p>or when autonegotiation is not enabled, the</p><p>duplex mode is controlled using</p><p>ifMauDefaultType. When autonegotiation is</p><p>supported and enabled, duplex mode is controlled</p><p>using ifMauAutoNegAdvertisedBits. In either</p><p>case, the currently operating duplex mode is</p><p>reflected both in this object and in ifMauType.</p><p>Note that this object provides redundant</p><p>information with ifMauType. Normally, redundant</p><p>objects are discouraged. However, in this</p><p>instance, it allows a management application to</p><p>determine the duplex status of an interface</p><p>without having to know every possible value of</p><p>ifMauType. This was felt to be sufficiently</p><p>valuable to justify the redundancy.</p><p>Reference: [IEEE 802.3 Std.], 30.3.1.1.32,aDuplexStatus.</p> |SNMP |net.if.duplex[dot3StatsDuplexStatus.{#SNMPINDEX}] | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Operational status |<p>MIB: IF-MIB</p><p>The current operational state of the interface.</p><p>- The testing(3) state indicates that no operational packet scan be passed</p><p>- If ifAdminStatus is down(2) then ifOperStatus should be down(2)</p><p>- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic</p><p>- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)</p><p>- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state</p><p>- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.</p> |SNMP |net.if.status[ifOperStatus.{#SNMPINDEX}] | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Bits received |<p>MIB: IF-MIB</p><p>The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.</p> |SNMP |net.if.in[ifHCInOctets.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND</p><p>- MULTIPLIER: `8`</p> | @@ -133,13 +135,13 @@ There are no template links in this template. |Interface {#IFNAME}({#IFALIAS}): High error rate (>{$IF.ERRORS.WARN:"{#IFNAME}"} for 5m) |<p>Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold</p> |`min(/Arista SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Arista SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}`<p>Recovery expression:</p>`max(/Arista SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 and max(/Arista SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | |Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before |<p>This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.</p> |`change(/Arista SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Arista SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Arista SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Arista SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Arista SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Arista SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Arista SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Arista SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Arista SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)`<p>Recovery expression:</p>`(change(/Arista SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Arista SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Arista SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)` |INFO |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | |{#ENT_NAME}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Arista SNMP/sensor.psu.status[entStateOper.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS}")=1` |AVERAGE | | -|{HOST.NAME} has been restarted (uptime < 10m) |<p>Uptime is less than 10 minutes</p> |`last(/Arista SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | +|{HOST.NAME} has been restarted (uptime < 10m) |<p>Uptime is less than 10 minutes.</p> |`last(/Arista SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | |No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/Arista SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |Unavailable by ICMP ping |<p>Last three attempts returned timeout. Please check device connectivity.</p> |`max(/Arista SNMP/icmpping,#3)=0` |HIGH | | |High ICMP ping loss |<p>-</p> |`min(/Arista SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Arista SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |High ICMP ping response time |<p>-</p> |`avg(/Arista SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}` |WARNING |<p>**Depends on**:</p><p>- High ICMP ping loss</p><p>- Unavailable by ICMP ping</p> | -|{#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 5G.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/Arista SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"} and ((last(/Arista SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/Arista SNMP/vfs.fs.used[hrStorageUsed.{#SNMPINDEX}]))<5G or timeleft(/Arista SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}],1h,100)<1d) ` |AVERAGE |<p>Manual close: YES</p> | -|{#FSNAME}: Disk space is low (used > {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 10G.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/Arista SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"} and ((last(/Arista SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/Arista SNMP/vfs.fs.used[hrStorageUsed.{#SNMPINDEX}]))<10G or timeleft(/Arista SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}],1h,100)<1d) ` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- {#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%)</p> | +|{#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"{#FSNAME}"}.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/Arista SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"} and ((last(/Arista SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/Arista SNMP/vfs.fs.used[hrStorageUsed.{#SNMPINDEX}]))<{$VFS.FS.FREE.MIN.CRIT:"{#FSNAME}"} or timeleft(/Arista SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}],1h,100)<1d) ` |AVERAGE |<p>Manual close: YES</p> | +|{#FSNAME}: Disk space is low (used > {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"{#FSNAME}"}.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/Arista SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"} and ((last(/Arista SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/Arista SNMP/vfs.fs.used[hrStorageUsed.{#SNMPINDEX}]))<{$VFS.FS.FREE.MIN.WARN:"{#FSNAME}"} or timeleft(/Arista SNMP/vfs.fs.pused[storageUsedPercentage.{#SNMPINDEX}],1h,100)<1d) ` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- {#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%)</p> | |{#SENSOR_INFO}: Temperature is below the warning threshold of {#THRESHOLD_LO_WARN}°C for 5m |<p>This trigger uses temperature sensor values defined in the device.</p> |`max(/Arista SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m) < {#THRESHOLD_LO_WARN}` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is below the critical threshold of {#THRESHOLD_LO_CRIT}°C for 5m</p> | |{#SENSOR_INFO}: Temperature is below the critical threshold of {#THRESHOLD_LO_CRIT}°C for 5m |<p>This trigger uses temperature sensor values defined in the device.</p> |`max(/Arista SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m) < {#THRESHOLD_LO_CRIT}` |HIGH | | |{#SENSOR_INFO}: Temperature is above the warning threshold of {#THRESHOLD_HI_WARN}°C for 5m |<p>This trigger uses temperature sensor values defined in the device.</p> |`min(/Arista SNMP/sensor.temp.value[entPhySensorValue.{#SNMPINDEX}],5m) > {#THRESHOLD_HI_WARN}` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is above the critical threshold of {#THRESHOLD_HI_CRIT}°C for 5m</p> | |