diff options
Diffstat (limited to 'templates/net/cisco/cisco_snmp/README.md')
| -rw-r--r-- | templates/net/cisco/cisco_snmp/README.md | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/templates/net/cisco/cisco_snmp/README.md b/templates/net/cisco/cisco_snmp/README.md index 870a5bdb321..b1d2afde8fd 100644 --- a/templates/net/cisco/cisco_snmp/README.md +++ b/templates/net/cisco/cisco_snmp/README.md @@ -89,7 +89,7 @@ There are no template links in this template. |Inventory |{#ENT_NAME}: Hardware serial number |<p>MIB: ENTITY-MIB</p> |SNMP |system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1d`</p> | |Memory |{#SNMPVALUE}: Used memory |<p>MIB: CISCO-MEMORY-POOL-MIB</p><p>Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p><p>Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15216-contiguous-memory.html</p> |SNMP |vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}] | |Memory |{#SNMPVALUE}: Free memory |<p>MIB: CISCO-MEMORY-POOL-MIB</p><p>Indicates the number of bytes from the memory pool that are currently unused on the managed device. Note that the sum of ciscoMemoryPoolUsed and ciscoMemoryPoolFree is the total amount of memory in the pool</p><p>Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15216-contiguous-memory.html</p> |SNMP |vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}] | -|Memory |{#SNMPVALUE}: Memory utilization |<p>Memory utilization in %</p> |CALCULATED |vm.memory.util[vm.memory.util.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}])/(last(//vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}])+last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}]))*100` | +|Memory |{#SNMPVALUE}: Memory utilization |<p>Memory utilization in %.</p> |CALCULATED |vm.memory.util[vm.memory.util.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}])/(last(//vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}])+last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}]))*100` | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Duplex status |<p>MIB: EtherLike-MIB</p><p>The current mode of operation of the MAC</p><p>entity. 'unknown' indicates that the current</p><p>duplex mode could not be determined.</p><p>Management control of the duplex mode is</p><p>accomplished through the MAU MIB. When</p><p>an interface does not support autonegotiation,</p><p>or when autonegotiation is not enabled, the</p><p>duplex mode is controlled using</p><p>ifMauDefaultType. When autonegotiation is</p><p>supported and enabled, duplex mode is controlled</p><p>using ifMauAutoNegAdvertisedBits. In either</p><p>case, the currently operating duplex mode is</p><p>reflected both in this object and in ifMauType.</p><p>Note that this object provides redundant</p><p>information with ifMauType. Normally, redundant</p><p>objects are discouraged. However, in this</p><p>instance, it allows a management application to</p><p>determine the duplex status of an interface</p><p>without having to know every possible value of</p><p>ifMauType. This was felt to be sufficiently</p><p>valuable to justify the redundancy.</p><p>Reference: [IEEE 802.3 Std.], 30.3.1.1.32,aDuplexStatus.</p> |SNMP |net.if.duplex[dot3StatsDuplexStatus.{#SNMPINDEX}] | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Operational status |<p>MIB: IF-MIB</p><p>The current operational state of the interface.</p><p>- The testing(3) state indicates that no operational packet scan be passed</p><p>- If ifAdminStatus is down(2) then ifOperStatus should be down(2)</p><p>- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic</p><p>- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)</p><p>- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state</p><p>- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.</p> |SNMP |net.if.status[ifOperStatus.{#SNMPINDEX}] | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Bits received |<p>MIB: IF-MIB</p><p>The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.</p> |SNMP |net.if.in[ifHCInOctets.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND</p><p>- MULTIPLIER: `8`</p> | @@ -128,7 +128,7 @@ There are no template links in this template. |Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before |<p>This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.</p> |`change(/Cisco IOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Cisco IOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Cisco IOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Cisco IOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Cisco IOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Cisco IOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Cisco IOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Cisco IOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Cisco IOS SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)`<p>Recovery expression:</p>`(change(/Cisco IOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Cisco IOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Cisco IOS SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)` |INFO |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | |{#SENSOR_INFO}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Cisco IOS SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"critical\"}")=1 or count(/Cisco IOS SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"shutdown\"}")=1` |AVERAGE | | |{#SENSOR_INFO}: Power supply is in warning state |<p>Please check the power supply unit for errors</p> |`count(/Cisco IOS SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"warning\"}")=1 or count(/Cisco IOS SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"notFunctioning\"}")=1` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Power supply is in critical state</p> | -|has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/Cisco IOS SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | +|has been restarted |<p>Uptime is less than 10 minutes.</p> |`last(/Cisco IOS SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | |No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/Cisco IOS SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |Unavailable by ICMP ping |<p>Last three attempts returned timeout. Please check device connectivity.</p> |`max(/Cisco IOS SNMP/icmpping,#3)=0` |HIGH | | |High ICMP ping loss |<p>-</p> |`min(/Cisco IOS SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Cisco IOS SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | @@ -236,7 +236,7 @@ There are no template links in this template. |Inventory |{#ENT_NAME}: Hardware serial number |<p>MIB: ENTITY-MIB</p> |SNMP |system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1d`</p> | |Memory |{#SNMPVALUE}: Used memory |<p>MIB: CISCO-MEMORY-POOL-MIB</p><p>Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p><p>Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15216-contiguous-memory.html</p> |SNMP |vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}] | |Memory |{#SNMPVALUE}: Free memory |<p>MIB: CISCO-MEMORY-POOL-MIB</p><p>Indicates the number of bytes from the memory pool that are currently unused on the managed device. Note that the sum of ciscoMemoryPoolUsed and ciscoMemoryPoolFree is the total amount of memory in the pool</p><p>Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15216-contiguous-memory.html</p> |SNMP |vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}] | -|Memory |{#SNMPVALUE}: Memory utilization |<p>Memory utilization in %</p> |CALCULATED |vm.memory.util[vm.memory.util.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}])/(last(//vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}])+last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}]))*100` | +|Memory |{#SNMPVALUE}: Memory utilization |<p>Memory utilization in %.</p> |CALCULATED |vm.memory.util[vm.memory.util.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}])/(last(//vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}])+last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}]))*100` | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Operational status |<p>MIB: IF-MIB</p><p>The current operational state of the interface.</p><p>- The testing(3) state indicates that no operational packet scan be passed</p><p>- If ifAdminStatus is down(2) then ifOperStatus should be down(2)</p><p>- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic</p><p>- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)</p><p>- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state</p><p>- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.</p> |SNMP |net.if.status[ifOperStatus.{#SNMPINDEX}] | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Bits received |<p>MIB: IF-MIB</p><p>The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.</p> |SNMP |net.if.in[ifHCInOctets.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND</p><p>- MULTIPLIER: `8`</p> | |Network interfaces |Interface {#IFNAME}({#IFALIAS}): Bits sent |<p>MIB: IF-MIB</p><p>The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.</p> |SNMP |net.if.out[ifHCOutOctets.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND</p><p>- MULTIPLIER: `8`</p> | @@ -273,7 +273,7 @@ There are no template links in this template. |Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before |<p>This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.</p> |`change(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)`<p>Recovery expression:</p>`(change(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)` |INFO |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | |{#SENSOR_INFO}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"critical\"}")=1 or count(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"shutdown\"}")=1` |AVERAGE | | |{#SENSOR_INFO}: Power supply is in warning state |<p>Please check the power supply unit for errors</p> |`count(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"warning\"}")=1 or count(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"notFunctioning\"}")=1` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Power supply is in critical state</p> | -|has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | +|has been restarted |<p>Uptime is less than 10 minutes.</p> |`last(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | |No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |Unavailable by ICMP ping |<p>Last three attempts returned timeout. Please check device connectivity.</p> |`max(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/icmpping,#3)=0` |HIGH | | |High ICMP ping loss |<p>-</p> |`min(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Cisco IOS versions 12.0_3_T-12.2_3.5 SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | @@ -358,7 +358,7 @@ There are no template links in this template. |Inventory |{#ENT_NAME}: Hardware serial number |<p>MIB: ENTITY-MIB</p> |SNMP |system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1d`</p> | |Memory |{#SNMPVALUE}: Used memory |<p>MIB: CISCO-MEMORY-POOL-MIB</p><p>Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.</p><p>Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15216-contiguous-memory.html</p> |SNMP |vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}] | |Memory |{#SNMPVALUE}: Free memory |<p>MIB: CISCO-MEMORY-POOL-MIB</p><p>Indicates the number of bytes from the memory pool that are currently unused on the managed device. Note that the sum of ciscoMemoryPoolUsed and ciscoMemoryPoolFree is the total amount of memory in the pool</p><p>Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15216-contiguous-memory.html</p> |SNMP |vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}] | -|Memory |{#SNMPVALUE}: Memory utilization |<p>Memory utilization in %</p> |CALCULATED |vm.memory.util[vm.memory.util.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}])/(last(//vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}])+last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}]))*100` | +|Memory |{#SNMPVALUE}: Memory utilization |<p>Memory utilization in %.</p> |CALCULATED |vm.memory.util[vm.memory.util.{#SNMPINDEX}]<p>**Expression**:</p>`last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}])/(last(//vm.memory.free[ciscoMemoryPoolFree.{#SNMPINDEX}])+last(//vm.memory.used[ciscoMemoryPoolUsed.{#SNMPINDEX}]))*100` | |Power supply |{#SENSOR_INFO}: Power supply status |<p>MIB: CISCO-ENVMON-MIB</p> |SNMP |sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}] | |Status |Uptime |<p>MIB: SNMPv2-MIB</p><p>The time (in hundredths of a second) since the network management portion of the system was last re-initialized.</p> |SNMP |system.uptime[sysUpTime.0]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.01`</p> | |Status |SNMP agent availability |<p>Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.</p><p>Possible value:</p><p>0 - not available</p><p>1 - available</p><p>2 - unknown</p> |INTERNAL |zabbix[host,snmp,available] | @@ -382,7 +382,7 @@ There are no template links in this template. |{#SNMPVALUE}: High memory utilization |<p>The system is running out of free memory.</p> |`min(/Cisco IOS prior to 12.0_3_T SNMP/vm.memory.util[vm.memory.util.{#SNMPINDEX}],5m)>{$MEMORY.UTIL.MAX}` |AVERAGE | | |{#SENSOR_INFO}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Cisco IOS prior to 12.0_3_T SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"critical\"}")=1 or count(/Cisco IOS prior to 12.0_3_T SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"shutdown\"}")=1` |AVERAGE | | |{#SENSOR_INFO}: Power supply is in warning state |<p>Please check the power supply unit for errors</p> |`count(/Cisco IOS prior to 12.0_3_T SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"warning\"}")=1 or count(/Cisco IOS prior to 12.0_3_T SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"notFunctioning\"}")=1` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Power supply is in critical state</p> | -|has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/Cisco IOS prior to 12.0_3_T SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | +|has been restarted |<p>Uptime is less than 10 minutes.</p> |`last(/Cisco IOS prior to 12.0_3_T SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | |No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/Cisco IOS prior to 12.0_3_T SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |Unavailable by ICMP ping |<p>Last three attempts returned timeout. Please check device connectivity.</p> |`max(/Cisco IOS prior to 12.0_3_T SNMP/icmpping,#3)=0` |HIGH | | |High ICMP ping loss |<p>-</p> |`min(/Cisco IOS prior to 12.0_3_T SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Cisco IOS prior to 12.0_3_T SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |