diff options
Diffstat (limited to 'templates/net/juniper_snmp/README.md')
| -rw-r--r-- | templates/net/juniper_snmp/README.md | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/templates/net/juniper_snmp/README.md b/templates/net/juniper_snmp/README.md index 52c111ff5c9..35b450081b6 100644 --- a/templates/net/juniper_snmp/README.md +++ b/templates/net/juniper_snmp/README.md @@ -113,14 +113,14 @@ There are no template links in this template. |Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before |<p>This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.</p> |`change(/Juniper SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Juniper SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Juniper SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Juniper SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Juniper SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Juniper SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Juniper SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Juniper SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Juniper SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)`<p>Recovery expression:</p>`(change(/Juniper SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Juniper SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Juniper SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)` |INFO |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | |{#SNMPVALUE}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Juniper SNMP/sensor.psu.status[jnxOperatingState.2.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS}")=1` |AVERAGE | | |System status is in critical state |<p>Please check the device for errors</p> |`count(/Juniper SNMP/system.status[jnxRedAlarmState.0],#1,"eq","{$HEALTH_CRIT_STATUS}")=1` |HIGH | | -|has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/Juniper SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | +|has been restarted |<p>Uptime is less than 10 minutes.</p> |`last(/Juniper SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | |No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/Juniper SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |Unavailable by ICMP ping |<p>Last three attempts returned timeout. Please check device connectivity.</p> |`max(/Juniper SNMP/icmpping,#3)=0` |HIGH | | |High ICMP ping loss |<p>-</p> |`min(/Juniper SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Juniper SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |High ICMP ping response time |<p>-</p> |`avg(/Juniper SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}` |WARNING |<p>**Depends on**:</p><p>- High ICMP ping loss</p><p>- Unavailable by ICMP ping</p> | -|{#SENSOR_INFO}: Temperature is above warning threshold |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)>{$TEMP_WARN:""}`<p>Recovery expression:</p>`max(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)<{$TEMP_WARN:""}-3` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is above critical threshold</p> | -|{#SENSOR_INFO}: Temperature is above critical threshold |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)>{$TEMP_CRIT:""}`<p>Recovery expression:</p>`max(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)<{$TEMP_CRIT:""}-3` |HIGH | | -|{#SENSOR_INFO}: Temperature is too low |<p>-</p> |`avg(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:""}`<p>Recovery expression:</p>`min(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:""}+3` |AVERAGE | | +|{#SENSOR_INFO}: Temperature is above warning threshold |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SENSOR_INFO}"}`<p>Recovery expression:</p>`max(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)<{$TEMP_WARN:"{#SENSOR_INFO}"}-3` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Temperature is above critical threshold</p> | +|{#SENSOR_INFO}: Temperature is above critical threshold |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SENSOR_INFO}"}`<p>Recovery expression:</p>`max(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)<{$TEMP_CRIT:"{#SENSOR_INFO}"}-3` |HIGH | | +|{#SENSOR_INFO}: Temperature is too low |<p>-</p> |`avg(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SENSOR_INFO}"}`<p>Recovery expression:</p>`min(/Juniper SNMP/sensor.temp.value[jnxOperatingTemp.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:"{#SENSOR_INFO}"}+3` |AVERAGE | | ## Feedback |