diff options
Diffstat (limited to 'templates/net/mikrotik/mikrotik_CCR2004-16G-2S+_snmp/README.md')
| -rw-r--r-- | templates/net/mikrotik/mikrotik_CCR2004-16G-2S+_snmp/README.md | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/templates/net/mikrotik/mikrotik_CCR2004-16G-2S+_snmp/README.md b/templates/net/mikrotik/mikrotik_CCR2004-16G-2S+_snmp/README.md index 4ffbb79c7bc..a608853a0a2 100644 --- a/templates/net/mikrotik/mikrotik_CCR2004-16G-2S+_snmp/README.md +++ b/templates/net/mikrotik/mikrotik_CCR2004-16G-2S+_snmp/README.md @@ -71,7 +71,7 @@ There are no template links in this template. |Network interfaces discovery |<p>Discovering interfaces from IF-MIB.</p> |SNMP |net.if.discovery<p>**Filter**:</p>AND <p>- {#IFADMINSTATUS} MATCHES_REGEX `{$NET.IF.IFADMINSTATUS.MATCHES}`</p><p>- {#IFADMINSTATUS} NOT_MATCHES_REGEX `{$NET.IF.IFADMINSTATUS.NOT_MATCHES}`</p><p>- {#IFOPERSTATUS} MATCHES_REGEX `{$NET.IF.IFOPERSTATUS.MATCHES}`</p><p>- {#IFOPERSTATUS} NOT_MATCHES_REGEX `{$NET.IF.IFOPERSTATUS.NOT_MATCHES}`</p><p>- {#IFNAME} MATCHES_REGEX `{$NET.IF.IFNAME.MATCHES}`</p><p>- {#IFNAME} NOT_MATCHES_REGEX `{$NET.IF.IFNAME.NOT_MATCHES}`</p><p>- {#IFDESCR} MATCHES_REGEX `{$NET.IF.IFDESCR.MATCHES}`</p><p>- {#IFDESCR} NOT_MATCHES_REGEX `{$NET.IF.IFDESCR.NOT_MATCHES}`</p><p>- {#IFALIAS} MATCHES_REGEX `{$NET.IF.IFALIAS.MATCHES}`</p><p>- {#IFALIAS} NOT_MATCHES_REGEX `{$NET.IF.IFALIAS.NOT_MATCHES}`</p><p>- {#IFTYPE} MATCHES_REGEX `{$NET.IF.IFTYPE.MATCHES}`</p><p>- {#IFTYPE} NOT_MATCHES_REGEX `{$NET.IF.IFTYPE.NOT_MATCHES}`</p> | |Storage discovery |<p>HOST-RESOURCES-MIB::hrStorage discovery with storage filter</p> |SNMP |storage.discovery<p>**Filter**:</p>OR <p>- {#STORAGE_TYPE} MATCHES_REGEX `.+4$`</p><p>- {#STORAGE_TYPE} MATCHES_REGEX `.+hrStorageFixedDisk`</p> | |Temperature CPU discovery |<p>MIKROTIK-MIB::mtxrHlProcessorTemperature</p><p>Since temperature of CPU is not available on all Mikrotik hardware, this is done to avoid unsupported items.</p> |SNMP |mtxrHlProcessorTemperature.discovery | -|Temperature sensor discovery |<p>MIKROTIK-MIB::mtxrHlTemperature</p><p>Since temperature sensor is not available on all Mikrotik hardware,</p><p>this is done to avoid unsupported items.</p> |SNMP |mtxrHlTemperature.discovery | +|Temperature sensor discovery |<p>MIKROTIK-MIB::mtxrHlTemperature</p><p>Since temperature sensor is not available on all Mikrotik hardware, this is done to avoid unsupported items.</p> |SNMP |mtxrHlTemperature.discovery | ## Items collected @@ -137,14 +137,14 @@ There are no template links in this template. |Interface {#IFNAME}({#IFALIAS}): Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.</p><p>3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`{$IFCONTROL:"{#IFNAME}"}=1 and last(/MikroTik CCR2004-16G-2S SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/MikroTik CCR2004-16G-2S SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/MikroTik CCR2004-16G-2S SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))`<p>Recovery expression:</p>`last(/MikroTik CCR2004-16G-2S SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2 or {$IFCONTROL:"{#IFNAME}"}=0` |AVERAGE |<p>Manual close: YES</p> | |Interface {#IFNAME}({#IFALIAS}): High bandwidth usage (>{$IF.UTIL.MAX:"{#IFNAME}"}%) |<p>The network interface utilization is close to its estimated maximum bandwidth.</p> |`(avg(/MikroTik CCR2004-16G-2S SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/MikroTik CCR2004-16G-2S SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0`<p>Recovery expression:</p>`avg(/MikroTik CCR2004-16G-2S SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) and avg(/MikroTik CCR2004-16G-2S SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | |Interface {#IFNAME}({#IFALIAS}): High error rate (>{$IF.ERRORS.WARN:"{#IFNAME}"} for 5m) |<p>Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold</p> |`min(/MikroTik CCR2004-16G-2S SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/MikroTik CCR2004-16G-2S SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}`<p>Recovery expression:</p>`max(/MikroTik CCR2004-16G-2S SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 and max(/MikroTik CCR2004-16G-2S SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | -|Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before |<p>This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.</p> |`change(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/MikroTik CCR2004-16G-2S SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) `<p>Recovery expression:</p>`(change(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/MikroTik CCR2004-16G-2S SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2) ` |INFO |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | +|Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before |<p>This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.</p> |`change(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/MikroTik CCR2004-16G-2S SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/MikroTik CCR2004-16G-2S SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)`<p>Recovery expression:</p>`(change(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/MikroTik CCR2004-16G-2S SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/MikroTik CCR2004-16G-2S SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)` |INFO |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Interface {#IFNAME}({#IFALIAS}): Link down</p> | |{HOST.NAME} has been restarted (uptime < 10m) |<p>Uptime is less than 10 minutes</p> |`last(/MikroTik CCR2004-16G-2S SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | |No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/MikroTik CCR2004-16G-2S SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |Unavailable by ICMP ping |<p>Last three attempts returned timeout. Please check device connectivity.</p> |`max(/MikroTik CCR2004-16G-2S SNMP/icmpping,#3)=0` |HIGH | | |High ICMP ping loss |<p>-</p> |`min(/MikroTik CCR2004-16G-2S SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/MikroTik CCR2004-16G-2S SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |High ICMP ping response time |<p>-</p> |`avg(/MikroTik CCR2004-16G-2S SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}` |WARNING |<p>**Depends on**:</p><p>- High ICMP ping loss</p><p>- Unavailable by ICMP ping</p> | -|Disk-{#SNMPINDEX}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 5G.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"} and ((last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.used[hrStorageSize.{#SNMPINDEX}]))<5G or timeleft(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}],1h,100)<1d) ` |AVERAGE |<p>Manual close: YES</p> | -|Disk-{#SNMPINDEX}: Disk space is low (used > {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 10G.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"} and ((last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.used[hrStorageSize.{#SNMPINDEX}]))<10G or timeleft(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}],1h,100)<1d) ` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Disk-{#SNMPINDEX}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}%)</p> | +|Disk-{#SNMPINDEX}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 5G.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"} and ((last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.used[hrStorageSize.{#SNMPINDEX}]))<5G or timeleft(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}],1h,100)<1d)` |AVERAGE |<p>Manual close: YES</p> | +|Disk-{#SNMPINDEX}: Disk space is low (used > {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}%) |<p>Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}.</p><p> Second condition should be one of the following:</p><p> - The disk free space is less than 10G.</p><p> - The disk will be full in less than 24 hours.</p> |`last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"} and ((last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.used[hrStorageSize.{#SNMPINDEX}]))<10G or timeleft(/MikroTik CCR2004-16G-2S SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}],1h,100)<1d)` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- Disk-{#SNMPINDEX}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}%)</p> | |CPU: Temperature is above warning threshold: >{$TEMP_WARN:"CPU"} |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/MikroTik CCR2004-16G-2S SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"CPU"}`<p>Recovery expression:</p>`max(/MikroTik CCR2004-16G-2S SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)<{$TEMP_WARN:"CPU"}-3` |WARNING |<p>**Depends on**:</p><p>- CPU: Temperature is above critical threshold: >{$TEMP_CRIT:"CPU"}</p> | |CPU: Temperature is above critical threshold: >{$TEMP_CRIT:"CPU"} |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/MikroTik CCR2004-16G-2S SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"CPU"}`<p>Recovery expression:</p>`max(/MikroTik CCR2004-16G-2S SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT:"CPU"}-3` |HIGH | | |CPU: Temperature is too low: <{$TEMP_CRIT_LOW:"CPU"} |<p>-</p> |`avg(/MikroTik CCR2004-16G-2S SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"CPU"}`<p>Recovery expression:</p>`min(/MikroTik CCR2004-16G-2S SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:"CPU"}+3` |AVERAGE | | |