diff options
Diffstat (limited to 'templates/net/zyxel_snmp/zyxel_mgs-3712f_snmp/README.md')
| -rw-r--r-- | templates/net/zyxel_snmp/zyxel_mgs-3712f_snmp/README.md | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/templates/net/zyxel_snmp/zyxel_mgs-3712f_snmp/README.md b/templates/net/zyxel_snmp/zyxel_mgs-3712f_snmp/README.md new file mode 100644 index 00000000000..400f305e067 --- /dev/null +++ b/templates/net/zyxel_snmp/zyxel_mgs-3712f_snmp/README.md @@ -0,0 +1,127 @@ + +# MGS-3712F SNMP + +## Overview + +For Zabbix version: 6.0 and higher +https://service-provider.zyxel.com/global/en/products/carrier-and-access-switches/access-switches/mgs-3712f + +This template was tested on: + +- ZYXEL MGS-3712F, version V3.90(BBB.5)_2019.9.23 + +## Setup + +> See [Zabbix template operation](https://www.zabbix.com/documentation/6.0/manual/config/templates_out_of_the_box/network_devices) for basic instructions. + +Refer to the vendor documentation. + +## Zabbix configuration + +No specific Zabbix configuration is required. + +### Macros used + +|Name|Description|Default| +|----|-----------|-------| +|{$CPU.UTIL.CRIT} |<p>-</p> |`90` | +|{$SNMP.TIMEOUT} |<p>The time interval for SNMP agent availability trigger expression.</p> |`5m` | +|{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES} |<p>Triggers will be created only for interfaces whose description contains the value of this macro</p> |`NEED TRIGGERS` | +|{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.MATCHES} |<p>Filter of discoverable link types.</p><p>0 - Down link</p><p>1 - Cooper link</p><p>2 - Fiber link</p> |`1|2` | +|{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.NOT_MATCHES} |<p>Filter to exclude discovered by link types.</p> |`CHANGE_IF_NEEDED` | +|{$ZYXEL.LLD.FILTER.IF.NAME.MATCHES} |<p>Filter by discoverable interface names.</p> |`.*` | +|{$ZYXEL.LLD.FILTER.IF.NAME.NOT_MATCHES} |<p>Filter to exclude discovered interfaces by name.</p> |`CHANGE_IF_NEEDED` | +|{$ZYXEL.LLD.FILTER.SFP.STATUS.MATCHES} |<p>Filter of discoverable status.</p><p>0 - OK with DDM</p><p>1 - OK without DDM</p><p>2 - nonoperational</p> |`1|2` | +|{$ZYXEL.LLD.FILTER.SFP.STATUS.NOT_MATCHES} |<p>Filter to exclude discovered by status.</p> |`CHANGE_IF_NEEDED` | +|{$ZYXEL.LLD.FILTER.SFPDDM.DESC.MATCHES} |<p>Filter by discoverable SFP modules name.</p> |`.*` | +|{$ZYXEL.LLD.FILTER.SFPDDM.DESC.NOT_MATCHES} |<p>Filter to exclude discovered SFP modules by name.</p> |`N/A` | +|{$ZYXEL.LLD.SFP.UPDATE} |<p>Receiving data from the SFP module is slow, we do not recommend setting the interval less than 10 minutes.</p> |`10m` | + +## Template links + +There are no template links in this template. + +## Discovery rules + +|Name|Description|Type|Key and additional info| +|----|-----------|----|----| +|Fan discovery |<p>An entry in fanRpmTable.</p> |SNMP |zyxel.3712f.fan.discovery | +|Temperature discovery |<p>An entry in tempTable.</p><p>Index of temperature unit. 1:MAC, 2:CPU, 3:PHY</p> |SNMP |zyxel.3712f.temp.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p> | +|Voltage discovery |<p>An entry in voltageTable.</p> |SNMP |zyxel.3712f.volt.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p> | +|Interface discovery |<p>An entry in fanRpmTable.</p> |SNMP |zyxel.3712f.net.if.discovery<p>**Filter**:</p>AND <p>- A: {#ZYXEL.IF.NAME} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.NAME.MATCHES}`</p><p>- B: {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.NAME.NOT_MATCHES}`</p><p>- C: {#ZYXEL.IF.LINKUPTYPE} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.MATCHES}`</p><p>- D: {#ZYXEL.IF.LINKUPTYPE} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.NOT_MATCHES}`</p> | +|SFP without DDM discovery |<p>SFP module discovery.</p> |SNMP |zyxel.3712f.sfp.discovery<p>**Filter**:</p>AND <p>- A: {#ZYXEL.SFP.STATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.SFP.STATUS.MATCHES}`</p><p>- B: {#ZYXEL.SFP.STATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.SFP.STATUS.NOT_MATCHES}`</p> | +|SFP with DDM discovery |<p>SFP DDM module discovery.</p> |SNMP |zyxel.3712f.sfp.ddm.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p><p>**Filter**:</p>AND <p>- A: {#ZYXEL.SFP.DESCRIPTION} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.SFPDDM.DESC.MATCHES}`</p><p>- B: {#ZYXEL.SFP.DESCRIPTION} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.SFPDDM.DESC.NOT_MATCHES}`</p> | + +## Items collected + +|Group|Name|Description|Type|Key and additional info| +|-----|----|-----------|----|---------------------| +|CPU |ZYXEL MGS-3712F: CPU utilization |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Show device CPU load in %, it's the snapshot of CPU load when </p><p>getting the values.</p> |SNMP |zyxel.3712f.cpuusage | +|Fans |ZYXEL MGS-3712F: Fan #{#SNMPINDEX} |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Current speed in Revolutions Per Minute (RPM) on the fan.</p> |SNMP |zyxel.3712f.fan[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Inventory |ZYXEL MGS-3712F: Hardware model name |<p>MIB: RFC1213-MIB</p><p>A textual description of the entity. This value</p><p>should include the full name and version</p><p>identification of the system's hardware type,</p><p>software operating-system, and networking</p><p>software. It is mandatory that this only contain</p><p>printable ASCII characters.</p> |SNMP |zyxel.3712f.model<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Inventory |ZYXEL MGS-3712F: Contact |<p>MIB: RFC1213-MIB</p><p>The textual identification of the contact person</p><p>for this managed node, together with information</p><p>on how to contact this person.</p> |SNMP |zyxel.3712f.contact<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Inventory |ZYXEL MGS-3712F: Host name |<p>MIB: RFC1213-MIB</p><p>An administratively-assigned name for this</p><p>managed node. By convention, this is the node's</p><p>fully-qualified domain name.</p> |SNMP |zyxel.3712f.name<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Inventory |ZYXEL MGS-3712F: Location |<p>MIB: RFC1213-MIB</p><p>The physical location of this node (e.g.,</p><p>`telephone closet, 3rd floor').</p> |SNMP |zyxel.3712f.location<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Inventory |ZYXEL MGS-3712F: MAC address |<p>MIB: IF-MIB</p><p>The interface's address at the protocol layer</p><p>immediately `below' the network layer in the</p><p>protocol stack. For interfaces which do not have</p><p>such an address (e.g., a serial line), this object</p><p>should contain an octet string of zero length.</p> |SNMP |zyxel.3712f.mac<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Inventory |ZYXEL MGS-3712F: ZyNOS F/W Version |<p>MIB: ZYXEL-MGS3712F-MIB</p> |SNMP |zyxel.3712f.fwversion<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1d`</p> | +|Inventory |ZYXEL MGS-3712F: Hardware serial number |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Serial number</p> |SNMP |zyxel.3712f.serialnumber<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Speed Duplex |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Transmission mode</p> |SNMP |zyxel.3712f.net.if.speed_duplex[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Interface description |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>A textual string containing information about the interface</p> |SNMP |zyxel.3712f.net.if.name[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Link type |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Physical connection type</p> |SNMP |zyxel.3712f.net.if.link_type[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Interface name |<p>MIB: IF-MIB</p><p>A textual string containing information about the interface</p> |SNMP |zyxel.3712f.net.if.descr[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Operational status |<p>MIB: IF-MIB</p><p>The current operational state of the interface.</p><p>The testing(3) state indicates that no operational</p><p>packets can be passed.</p> |SNMP |zyxel.3712f.net.if.operstatus[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Administrative status |<p>MIB: IF-MIB</p><p>The desired state of the interface. The</p><p>testing(3) state indicates that no operational</p><p>packets can be passed.</p> |SNMP |zyxel.3712f.net.if.adminstatus[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Incoming traffic |<p>MIB: IF-MIB</p><p>The total number of octets received on the interface,</p><p>including framing characters.</p> |SNMP |zyxel.3712f.net.if.in.traffic[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `8`</p><p>- CHANGE_PER_SECOND | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Incoming unicast packages |<p>MIB: IF-MIB</p><p>The number of packets, delivered by this sub-layer to a</p><p>higher (sub-)layer, which were not addressed to a multicast</p><p>or broadcast address at this sub-layer</p> |SNMP |zyxel.3712f.net.if.in.ucastpkts[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Incoming multicast packages |<p>MIB: IF-MIB</p><p>The number of packets, delivered by this sub-layer to a</p><p>higher (sub-)layer, which were addressed to a multicast</p><p>address at this sub-layer. For a MAC layer protocol, this</p><p>includes both Group and Functional addresses.</p> |SNMP |zyxel.3712f.net.if.in.multicastpkts[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Incoming broadcast packages |<p>MIB: IF-MIB</p><p>The number of packets, delivered by this sub-layer to a</p><p>higher (sub-)layer, which were addressed to a broadcast</p><p>address at this sub-layer.</p> |SNMP |zyxel.3712f.net.if.in.broadcastpkts[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Outgoing traffic |<p>MIB: IF-MIB</p><p>The total number of octets transmitted out of the</p><p>interface, including framing characters. This object is a</p><p>64-bit version of ifOutOctets.</p> |SNMP |zyxel.3712f.net.if.out.traffic[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `8`</p><p>- CHANGE_PER_SECOND | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Outgoing unicast packages |<p>MIB: IF-MIB</p><p>The total number of packets that higher-level protocols</p><p>requested be transmitted, and which were not addressed to a</p><p>multicast or broadcast address at this sub-layer, including</p><p>those that were discarded or not sent.</p> |SNMP |zyxel.3712f.net.if.out.ucastpkts[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Outgoing multicast packages |<p>MIB: IF-MIB</p><p>The total number of packets that higher-level protocols</p><p>requested be transmitted, and which were addressed to a</p><p>multicast address at this sub-layer, including those that</p><p>were discarded or not sent. For a MAC layer protocol, this</p><p>includes both Group and Functional addresses.</p> |SNMP |zyxel.3712f.net.if.out.multicastpkts[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Outgoing broadcast packages |<p>MIB: IF-MIB</p><p>The total number of packets that higher-level protocols</p><p>requested be transmitted, and which were addressed to a</p><p>broadcast address at this sub-layer, including those that</p><p>were discarded or not sent.</p> |SNMP |zyxel.3712f.net.if.out.broadcastpkts[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Link speed |<p>MIB: IF-MIB</p><p>An estimate of the interface's current bandwidth in bits per second</p> |SNMP |zyxel.3712f.net.if.highspeed[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `1000000`</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Incoming utilization |<p>Interface utilization percentage</p> |CALCULATED |zyxel.3712f.net.if.in.util[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- IN_RANGE: `0 100`</p><p>⛔️ON_FAIL: `DISCARD_VALUE -> `</p><p>**Expression**:</p>`last(zyxel.3712f.net.if.in.traffic[{#SNMPINDEX}]) * (last(zyxel.3712f.net.if.highspeed[{#SNMPINDEX}]) <> 0) / ( last(zyxel.3712f.net.if.highspeed[{#SNMPINDEX}]) + (last(zyxel.3712f.net.if.highspeed[{#SNMPINDEX}]) = 0) ) * 100 ` | +|Network_interfaces |ZYXEL MGS-3712F: Port {#SNMPINDEX}: Outgoing utilization |<p>Interface utilization percentage</p> |CALCULATED |zyxel.3712f.net.if.out.util[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- IN_RANGE: `0 100`</p><p>⛔️ON_FAIL: `DISCARD_VALUE -> `</p><p>**Expression**:</p>`last(zyxel.3712f.net.if.out.traffic[{#SNMPINDEX}]) * (last(zyxel.3712f.net.if.highspeed[{#SNMPINDEX}]) <> 0) / ( last(zyxel.3712f.net.if.highspeed[{#SNMPINDEX}]) + (last(zyxel.3712f.net.if.highspeed[{#SNMPINDEX}]) = 0) ) * 100 ` | +|Network_interfaces |ZYXEL MGS-3712F: SFP {#SNMPINDEX}: Status |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Transceiver module status.</p> |SNMP |zyxel.3712f.sfp.status[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: SFP {#SNMPINDEX}: Vendor |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Transceiver module vendor name.</p> |SNMP |zyxel.3712f.sfp.vendor[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: SFP {#SNMPINDEX}: Part number |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Part number provided by transceiver module vendor.</p> |SNMP |zyxel.3712f.sfp.part[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: SFP {#SNMPINDEX}: Serial number |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Serial number provided by transceiver module vendor.</p> |SNMP |zyxel.3712f.sfp.serialnumber[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: SFP {#SNMPINDEX}: Revision |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Revision level for part number provided by transceiver module vendor.</p> |SNMP |zyxel.3712f.sfp.revision[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: SFP {#SNMPINDEX}: Date code |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Transceiver module vendor's manufacturing date code.</p> |SNMP |zyxel.3712f.sfp.datecode[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: SFP {#SNMPINDEX}: Transceiver |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Transceiver module type names.</p> |SNMP |zyxel.3712f.sfp.transceiver[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Network_interfaces |ZYXEL MGS-3712F: SFP {#ZYXEL.SFP.PORT}: {#ZYXEL.SFP.DESCRIPTION} |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>Transceiver module DDM data ({#ZYXEL.SFP.DESCRIPTION}).</p> |SNMP |zyxel.3712f.sfp.ddm[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.01`</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> | +|Power_supply |ZYXEL MGS-3712F: Nominal "{#ZYXEL.VOLT.NOMINAL}" |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>The current voltage reading.</p> |SNMP |zyxel.3712f.volt[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.001`</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Status |ZYXEL MGS-3712F: SNMP agent availability |<p>-</p> |INTERNAL |zabbix[host,snmp,available]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | +|Status |ZYXEL MGS-3712F: Uptime |<p>MIB: RFC1213-MIB</p><p>The time (in hundredths of a second) since the</p><p>network management portion of the system was last</p><p>re-initialized.</p> |SNMP |zyxel.3712f.uptime<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.01`</p> | +|Temperature |ZYXEL MGS-3712F: Temperature "{#ZYXEL.TEMP.ID}" |<p>MIB: ZYXEL-MGS3712F-MIB</p><p>The current temperature measured at this sensor</p> |SNMP |zyxel.3712f.temp[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `1h`</p> | + +## Triggers + +|Name|Description|Expression|Severity|Dependencies and additional info| +|----|-----------|----|----|----| +|ZYXEL MGS-3712F: High CPU utilization (over {$CPU.UTIL.CRIT}% for 5m) |<p>CPU utilization is too high. The system might be slow to respond.</p> |`{TEMPLATE_NAME:zyxel.3712f.cpuusage.min(5m)}>{$CPU.UTIL.CRIT}` |WARNING | | +|ZYXEL MGS-3712F: FAN{#SNMPINDEX} is in critical state |<p>Please check the fan unit</p> |`{TEMPLATE_NAME:zyxel.3712f.fan[{#SNMPINDEX}].last()}<{#ZYXEL.FANRPM.THRESH.LOW}` |AVERAGE | | +|ZYXEL MGS-3712F: Template does not match hardware |<p>This template is for Zyxel MGS-3712F, but connected to {ITEM.VALUE}</p> |`{TEMPLATE_NAME:zyxel.3712f.model.last()}<>"MGS-3712F"` |INFO | | +|ZYXEL MGS-3712F: Firmware has changed |<p>Firmware version has changed. Ack to close</p> |`{TEMPLATE_NAME:zyxel.3712f.fwversion.diff()}=1 and {TEMPLATE_NAME:zyxel.3712f.fwversion.strlen()}>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL MGS-3712F: Device has been replaced (new serial number received) |<p>Device serial number has changed. Ack to close</p> |`{TEMPLATE_NAME:zyxel.3712f.serialnumber.diff()}=1 and {TEMPLATE_NAME:zyxel.3712f.serialnumber.strlen()}>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL MGS-3712F: Port {#SNMPINDEX}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`{TEMPLATE_NAME:zyxel.3712f.net.if.operstatus[{#SNMPINDEX}].last()}=2 and {TEMPLATE_NAME:zyxel.3712f.net.if.operstatus[{#SNMPINDEX}].diff()}=1`<p>Recovery expression:</p>`{TEMPLATE_NAME:zyxel.3712f.net.if.operstatus[{#SNMPINDEX}].last()}<>2` |AVERAGE |<p>Manual close: YES</p> | +|ZYXEL MGS-3712F: SFP {#SNMPINDEX} has been replaced (new serial number received) |<p>SFP {#SNMPINDEX} serial number has changed. Ack to close</p> |`{TEMPLATE_NAME:zyxel.3712f.sfp.serialnumber[{#SNMPINDEX}].diff()}=1 and {TEMPLATE_NAME:zyxel.3712f.sfp.serialnumber[{#SNMPINDEX}].strlen()}>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL MGS-3712F: SFP {#ZYXEL.SFP.PORT}: High {#ZYXEL.SFP.DESCRIPTION} (over {#ZYXEL.SFP.WARN.MAX}{#ZYXEL.SFP.UNIT}) |<p>The upper threshold value of the parameter is exceeded</p> |`{TEMPLATE_NAME:zyxel.3712f.sfp.ddm[{#SNMPINDEX}].last()} > {#ZYXEL.SFP.WARN.MAX}` |WARNING | | +|ZYXEL MGS-3712F: SFP {#ZYXEL.SFP.PORT}: Low {#ZYXEL.SFP.DESCRIPTION} (less than {#ZYXEL.SFP.WARN.MIN}{#ZYXEL.SFP.UNIT}) |<p>The parameter values are less than the lower threshold</p> |`{TEMPLATE_NAME:zyxel.3712f.sfp.ddm[{#SNMPINDEX}].last()} < {#ZYXEL.SFP.WARN.MIN}` |WARNING | | +|ZYXEL MGS-3712F: Voltage {#ZYXEL.VOLT.NOMINAL} is in critical state |<p>Please check the power supply</p> |`{TEMPLATE_NAME:zyxel.3712f.volt[{#SNMPINDEX}].last()}<{#ZYXEL.VOLT.THRESH.LOW}` |AVERAGE | | +|ZYXEL MGS-3712F: No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`{TEMPLATE_NAME:zabbix[host,snmp,available].max({$SNMP.TIMEOUT})}=0` |WARNING | | +|ZYXEL MGS-3712F: has been restarted (uptime < 10m) |<p>Uptime is less than 10 minutes</p> |`{TEMPLATE_NAME:zyxel.3712f.uptime.last()}<10m` |INFO |<p>Manual close: YES</p> | +|ZYXEL MGS-3712F: Temperature {#ZYXEL.TEMP.ID} is in critical state |<p>Please check the temperature</p> |`{TEMPLATE_NAME:zyxel.3712f.temp[{#SNMPINDEX}].last()}>{#ZYXEL.TEMP.THRESH.HIGH}` |AVERAGE | | + +## Feedback + +Please report any issues with the template at https://support.zabbix.com + +You can also provide a feedback, discuss the template or ask for help with it at [ZABBIX forums](https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/422668-discussion-thread-for-official-zabbix-templates-for-zyxel). + +## Known Issues + +- Description: Incorrect handling of SNMP bulk requests. Disable the use of bulk requests in the SNMP interface settings. + - Version: all versions firmware + - Device: ZYXEL MGS-3712F + |