diff options
Diffstat (limited to 'templates/san/netapp_fas3220_snmp/README.md')
| -rw-r--r-- | templates/san/netapp_fas3220_snmp/README.md | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/templates/san/netapp_fas3220_snmp/README.md b/templates/san/netapp_fas3220_snmp/README.md index 2823afc614c..1e8bf8ffbc0 100644 --- a/templates/san/netapp_fas3220_snmp/README.md +++ b/templates/san/netapp_fas3220_snmp/README.md @@ -126,7 +126,7 @@ There are no template links in this template. |Node {#NODE.NAME}: High CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/NetApp FAS3220 SNMP/fas3220.cpu[cDOTCpuBusyTimePerCent, "{#NODE.NAME}"],5m)>{$CPU.UTIL.CRIT}` |WARNING | | |System name has changed |<p>System name has changed. Ack to close.</p> |`last(/NetApp FAS3220 SNMP/system.name,#1)<>last(/NetApp FAS3220 SNMP/system.name,#2) and length(last(/NetApp FAS3220 SNMP/system.name))>0` |INFO |<p>Manual close: YES</p> | |NetApp FAS3220: Number of failed disks has changed |<p>{{ITEM.LASTVALUE2}.regsub("(.*)", \1)}</p> |`last(/NetApp FAS3220 SNMP/fas3220.disk[diskFailedCount])>0 and last(/NetApp FAS3220 SNMP/fas3220.disk[diskFailedMessage],#1)<>last(/NetApp FAS3220 SNMP/fas3220.disk[diskFailedMessage],#2)`<p>Recovery expression:</p>`last(/NetApp FAS3220 SNMP/fas3220.disk[diskFailedCount])=0` |WARNING | | -|Node {#NODE.NAME}: has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/NetApp FAS3220 SNMP/fas3220.cluster[nodeUptime, "{#NODE.NAME}"])<10m` |INFO |<p>Manual close: YES</p> | +|Node {#NODE.NAME}: has been restarted |<p>Uptime is less than 10 minutes.</p> |`last(/NetApp FAS3220 SNMP/fas3220.cluster[nodeUptime, "{#NODE.NAME}"])<10m` |INFO |<p>Manual close: YES</p> | |Node {#NODE.NAME}: Node can not communicate with the cluster |<p>-</p> |`last(/NetApp FAS3220 SNMP/fas3220.cluster[nodeHealth, "{#NODE.NAME}"])=0` |HIGH |<p>Manual close: YES</p> | |Node {#NODE.NAME}: NVRAM battery status is not OK |<p>-</p> |`last(/NetApp FAS3220 SNMP/fas3220.cluster[nodeNvramBatteryStatus, "{#NODE.NAME}"])<>1` |AVERAGE |<p>Manual close: YES</p> | |Node {#NODE.NAME}: Temperature is over than recommended |<p>The hardware will shutdown if the temperature exceeds critical thresholds.</p> |`last(/NetApp FAS3220 SNMP/fas3220.cluster[nodeEnvOverTemperature, "{#NODE.NAME}"])=2` |HIGH | | @@ -140,7 +140,7 @@ There are no template links in this template. |Node {#NODE}: port {#IFNAME} ({#TYPE}): Link down |<p>Link state is not UP and the port status is set 'UP' by an administrator.</p> |`last(/NetApp FAS3220 SNMP/fas3220.net.port[netportLinkState, "{#NODE}", "{#IFNAME}"])<>2 and last(/NetApp FAS3220 SNMP/fas3220.net.port[netportUpAdmin, "{#NODE}", "{#IFNAME}"])=1` |AVERAGE |<p>Manual close: YES</p> | |Node {#NODE}: port {#IFNAME} ({#TYPE}): Port is not healthy |<p>{{ITEM.LASTVALUE2}.regsub("(.*)", \1)}</p> |`last(/NetApp FAS3220 SNMP/fas3220.net.port[netportHealthStatus, "{#NODE}", "{#IFNAME}"])<>0 and length(last(/NetApp FAS3220 SNMP/fas3220.net.port[netportDegradedReason, "{#NODE}", "{#IFNAME}"]))>0` |INFO | | |Node {#NODE}: port {#IFNAME} ({#TYPE}): High error rate |<p>Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold</p> |`min(/NetApp FAS3220 SNMP/fas3220.net.if[if64InErrors, "{#NODE}", "{#IFNAME}"],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/NetApp FAS3220 SNMP/fas3220.net.if[if64OutErrors, "{#NODE}", "{#IFNAME}"],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} `<p>Recovery expression:</p>`max(/NetApp FAS3220 SNMP/fas3220.net.if[if64InErrors, "{#NODE}", "{#IFNAME}"],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 and max(/NetApp FAS3220 SNMP/fas3220.net.if[if64OutErrors, "{#NODE}", "{#IFNAME}"],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 ` |WARNING |<p>Manual close: YES</p> | -|has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/NetApp FAS3220 SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | +|has been restarted |<p>Uptime is less than 10 minutes.</p> |`last(/NetApp FAS3220 SNMP/system.uptime[sysUpTime.0])<10m` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> | |No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/NetApp FAS3220 SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |Unavailable by ICMP ping |<p>Last three attempts returned timeout. Please check device connectivity.</p> |`max(/NetApp FAS3220 SNMP/icmpping,#3)=0` |HIGH | | |High ICMP ping loss |<p>-</p> |`min(/NetApp FAS3220 SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/NetApp FAS3220 SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> | |