# ZYXEL MES3500-24S SNMP ## Overview For Zabbix version: 6.0 and higher hhttps://service-provider.zyxel.com/emea/en/products/carrier-and-access-switches/access-switches/mes3500-series This template was tested on: - ZYXEL MES3500-24S, version V4.10(ABBR.1)C0_20200309 | 03/09/2020 ## Setup > See [Zabbix template operation](https://www.zabbix.com/documentation/6.0/manual/config/templates_out_of_the_box/network_devices) for basic instructions. Refer to the vendor documentation. ## Zabbix configuration No specific Zabbix configuration is required. ### Macros used |Name|Description|Default| |----|-----------|-------| |{$CPU.UTIL.CRIT} |

|`90` | |{$MEMORY.UTIL.MAX} |

|`90` | |{$SNMP.TIMEOUT} |

The time interval for SNMP agent availability trigger expression.

|`5m` | |{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES} |

Triggers will be created only for interfaces whose description contains the value of this macro

|`CHANGE_IF_NEEDED` | |{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.MATCHES} |

Filter of discoverable link types.

0 - Down link

1 - Cooper link

2 - Fiber link

3 - XFP

4 - CX4

|`1|2|3|4` | |{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.NOT_MATCHES} |

Filter to exclude discovered by link types.

|`CHANGE_IF_NEEDED` | |{$ZYXEL.LLD.FILTER.IF.NAME.MATCHES} |

Filter by discoverable interface names.

|`.*` | |{$ZYXEL.LLD.FILTER.IF.NAME.NOT_MATCHES} |

Filter to exclude discovered interfaces by name.

|`CHANGE_IF_NEEDED` | |{$ZYXEL.LLD.FILTER.SFP.STATUS.MATCHES} |

Filter of discoverable status.

0 - OK with DDM

1 - OK without DDM

2 - nonoperational

|`1|2` | |{$ZYXEL.LLD.FILTER.SFP.STATUS.NOT_MATCHES} |

Filter to exclude discovered by status.

|`CHANGE_IF_NEEDED` | |{$ZYXEL.LLD.FILTER.SFPDDM.DESC.MATCHES} |

Filter by discoverable SFP modules name.

|`.*` | |{$ZYXEL.LLD.FILTER.SFPDDM.DESC.NOT_MATCHES} |

Filter to exclude discovered SFP modules by name.

|`N/A` | |{$ZYXEL.LLD.SFP.UPDATE} |

Receiving data from the SFP module is slow, we do not recommend setting the interval less than 10 minutes.

|`10m` | ## Template links There are no template links in this template. ## Discovery rules |Name|Description|Type|Key and additional info| |----|-----------|----|----| |Fan discovery |

An entry in fanRpmTable.

|SNMP |zyxel.3500_24s.net.if.discovery

**Filter**:

AND

- {#ZYXEL.IF.NAME} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.NAME.MATCHES}`

- {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.NAME.NOT_MATCHES}`

- {#ZYXEL.IF.LINKUPTYPE} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.MATCHES}`

- {#ZYXEL.IF.LINKUPTYPE} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.NOT_MATCHES}`

**Overrides:**

Don't create triggers for matching interface
- {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`
- TRIGGER_PROTOTYPE REGEXP `.*` - NO_DISCOVER

| |SFP with DDM discovery |

SFP DDM module discovery.

|SNMP |zyxel.3500_24s.sfp.ddm.discovery

**Preprocessing**:

- JAVASCRIPT: `The text is too long. Please see the template.`

**Filter**:

AND

- {#ZYXEL.SFP.DESCRIPTION} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.SFPDDM.DESC.MATCHES}`

- {#ZYXEL.SFP.DESCRIPTION} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.SFPDDM.DESC.NOT_MATCHES}`

| |SFP without DDM discovery |

SFP module discovery.

|SNMP |zyxel.3500_24s.sfp.discovery

**Filter**:

AND

- {#ZYXEL.SFP.STATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.SFP.STATUS.MATCHES}`

- {#ZYXEL.SFP.STATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.SFP.STATUS.NOT_MATCHES}`

| |Temperature discovery |

An entry in tempTable.

An entry in voltageTable.

|SNMP |zyxel.3500_24s.volt.discovery

**Preprocessing**:

- JAVASCRIPT: `The text is too long. Please see the template.`

| ## Items collected |Group|Name|Description|Type|Key and additional info| |-----|----|-----------|----|---------------------| |CPU |ZYXEL MES3500-24S: CPU utilization |

MIB: ZYXEL-ES-COMMON

Show device CPU load in %, it's the snapshot of CPU load when

getting the values.

|SNMP |zyxel.3500_24s.cpuusage | |Fans |ZYXEL MES3500-24S: {#ZYXEL.FAN.DESCRIPTION} |

MIB: ZYXEL-HW-MONITOR-MIB

Current speed in Revolutions Per Minute (RPM) on the fan.

|SNMP |zyxel.3500_24s.fan[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Inventory |ZYXEL MES3500-24S: Hardware model name |

MIB: RFC1213-MIB

A textual description of the entity. This value

should include the full name and version

identification of the system's hardware type,

software operating-system, and networking

software. It is mandatory that this only contain

printable ASCII characters.

|SNMP |zyxel.3500_24s.model

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Inventory |ZYXEL MES3500-24S: Contact |

MIB: RFC1213-MIB

The textual identification of the contact person

for this managed node, together with information

on how to contact this person.

|SNMP |zyxel.3500_24s.contact

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Inventory |ZYXEL MES3500-24S: Host name |

MIB: RFC1213-MIB

An administratively-assigned name for this

managed node. By convention, this is the node's

fully-qualified domain name.

|SNMP |zyxel.3500_24s.name

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Inventory |ZYXEL MES3500-24S: Location |

MIB: RFC1213-MIB

The physical location of this node (e.g.,

`telephone closet, 3rd floor').

|SNMP |zyxel.3500_24s.location

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Inventory |ZYXEL MES3500-24S: MAC address |

MIB: IF-MIB

The interface's address at the protocol layer

immediately `below' the network layer in the

protocol stack. For interfaces which do not have

such an address (e.g., a serial line), this object

should contain an octet string of zero length.

|SNMP |zyxel.3500_24s.mac

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Inventory |ZYXEL MES3500-24S: ZyNOS F/W Version |

MIB: ZYXEL-ES-COMMON

|SNMP |zyxel.3500_24s.fwversion

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Inventory |ZYXEL MES3500-24S: Hardware serial number |

MIB: ZYXEL-ES-COMMON

Serial number

|SNMP |zyxel.3500_24s.serialnumber

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Memory |ZYXEL MES3500-24S: Memory utilization |

MIB: ZYXEL-ES-COMMON

Show device memory usage in %.

|SNMP |zyxel.3500_24s.memusage | |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Speed Duplex |

MIB: ZYXEL-PORT-MIB

Select The speed and the duplex mode of the Ethernet connection on this port. Selecting Auto

(auto-negotiation) allows one port to negotiate with a peer port automatically to obtain the

connection speed and duplex mode that both ends support. When auto-negotiation is turned on,

a port on the Switch negotiates with the peer automatically to determine the connection speed

and duplex mode. If the peer port does not support auto-negotiation or turns off this feature,

the Switch determines the connection speed by detecting the signal on the cable and using half

duplex mode. Thus requiring you to make sure that the settings of the peer port are the same in

order to connect.

|SNMP |zyxel.3500_24s.net.if.speed_duplex[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Interface description |

MIB: ZYXEL-PORT-MIB

Descriptive name that identifies this port.

|SNMP |zyxel.3500_24s.net.if.name[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Link type |

MIB: ZYXEL-PORT-MIB

The entry shows the linkUp cable type (copper, fiber, xfp or cx4) for the combo ports.

|SNMP |zyxel.3500_24s.net.if.link_type[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Interface name |

MIB: IF-MIB

A textual string containing information about the interface

|SNMP |zyxel.3500_24s.net.if.descr[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Operational status |

MIB: IF-MIB

The current operational state of the interface.

The testing(3) state indicates that no operational

packets can be passed.

|SNMP |zyxel.3500_24s.net.if.operstatus[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Administrative status |

MIB: IF-MIB

The desired state of the interface. The

testing(3) state indicates that no operational

packets can be passed.

|SNMP |zyxel.3500_24s.net.if.adminstatus[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Incoming traffic |

MIB: IF-MIB

The total number of octets received on the interface,

including framing characters.

|SNMP |zyxel.3500_24s.net.if.in.traffic[{#SNMPINDEX}]

**Preprocessing**:

- MULTIPLIER: `8`

- CHANGE_PER_SECOND

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Incoming unicast packages |

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were not addressed to a multicast

or broadcast address at this sub-layer

|SNMP |zyxel.3500_24s.net.if.in.ucastpkts[{#SNMPINDEX}]

**Preprocessing**:

- CHANGE_PER_SECOND

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Incoming multicast packages |

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer. For a MAC layer protocol, this

includes both Group and Functional addresses.

|SNMP |zyxel.3500_24s.net.if.in.multicastpkts[{#SNMPINDEX}]

**Preprocessing**:

- CHANGE_PER_SECOND

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Incoming broadcast packages |

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

address at this sub-layer.

|SNMP |zyxel.3500_24s.net.if.in.broadcastpkts[{#SNMPINDEX}]

**Preprocessing**:

- CHANGE_PER_SECOND

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Outgoing traffic |

MIB: IF-MIB

The total number of octets transmitted out of the

interface, including framing characters. This object is a

64-bit version of ifOutOctets.

|SNMP |zyxel.3500_24s.net.if.out.traffic[{#SNMPINDEX}]

**Preprocessing**:

- MULTIPLIER: `8`

- CHANGE_PER_SECOND

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Outgoing unicast packages |

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were not addressed to a

multicast or broadcast address at this sub-layer, including

those that were discarded or not sent.

|SNMP |zyxel.3500_24s.net.if.out.ucastpkts[{#SNMPINDEX}]

**Preprocessing**:

- CHANGE_PER_SECOND

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Outgoing multicast packages |

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

multicast address at this sub-layer, including those that

were discarded or not sent. For a MAC layer protocol, this

includes both Group and Functional addresses.

|SNMP |zyxel.3500_24s.net.if.out.multicastpkts[{#SNMPINDEX}]

**Preprocessing**:

- CHANGE_PER_SECOND

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Outgoing broadcast packages |

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

broadcast address at this sub-layer, including those that

were discarded or not sent.

|SNMP |zyxel.3500_24s.net.if.out.broadcastpkts[{#SNMPINDEX}]

**Preprocessing**:

- CHANGE_PER_SECOND

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Link speed |

MIB: IF-MIB

An estimate of the interface's current bandwidth in bits per second

|SNMP |zyxel.3500_24s.net.if.highspeed[{#SNMPINDEX}]

**Preprocessing**:

- MULTIPLIER: `1000000`

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Incoming utilization |

Interface utilization percentage

|CALCULATED |zyxel.3500_24s.net.if.in.util[{#SNMPINDEX}]

**Preprocessing**:

- IN_RANGE: `0 100`

⛔️ON_FAIL: `DISCARD_VALUE -> `

- JAVASCRIPT: `return +parseFloat(value).toFixed(0); `

**Expression**:

`last(//zyxel.3500_24s.net.if.in.traffic[{#SNMPINDEX}]) * (last(//zyxel.3500_24s.net.if.highspeed[{#SNMPINDEX}]) <> 0) / ( last(//zyxel.3500_24s.net.if.highspeed[{#SNMPINDEX}]) + (last(//zyxel.3500_24s.net.if.highspeed[{#SNMPINDEX}]) = 0) ) * 100` | |Network interfaces |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Outgoing utilization |

Interface utilization percentage

|CALCULATED |zyxel.3500_24s.net.if.out.util[{#SNMPINDEX}]

**Preprocessing**:

- IN_RANGE: `0 100`

⛔️ON_FAIL: `DISCARD_VALUE -> `

- JAVASCRIPT: `return +parseFloat(value).toFixed(0); `

**Expression**:

`last(//zyxel.3500_24s.net.if.out.traffic[{#SNMPINDEX}]) * (last(//zyxel.3500_24s.net.if.highspeed[{#SNMPINDEX}]) <> 0) / ( last(//zyxel.3500_24s.net.if.highspeed[{#SNMPINDEX}]) + (last(//zyxel.3500_24s.net.if.highspeed[{#SNMPINDEX}]) = 0) ) * 100` | |Network interfaces |ZYXEL MES3500-24S: SFP {#SNMPINDEX}: Status |

MIB: ZYXEL-TRANSCEIVER-MIB

Transceiver module type.

|SNMP |zyxel.3500_24s.sfp.status[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Network interfaces |ZYXEL MES3500-24S: SFP {#SNMPINDEX}: Vendor |

MIB: ZYXEL-TRANSCEIVER-MIB

Transceiver module vendor name.

|SNMP |zyxel.3500_24s.sfp.vendor[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Network interfaces |ZYXEL MES3500-24S: SFP {#SNMPINDEX}: Part number |

MIB: ZYXEL-TRANSCEIVER-MIB

Part number provided by transceiver module vendor.

|SNMP |zyxel.3500_24s.sfp.part[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Network interfaces |ZYXEL MES3500-24S: SFP {#SNMPINDEX}: Serial number |

MIB: ZYXEL-TRANSCEIVER-MIB

Serial number provided by transceiver module vendor.

|SNMP |zyxel.3500_24s.sfp.serialnumber[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Network interfaces |ZYXEL MES3500-24S: SFP {#SNMPINDEX}: Revision |

MIB: ZYXEL-TRANSCEIVER-MIB

Revision level for part number provided by transceiver module vendor.

|SNMP |zyxel.3500_24s.sfp.revision[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Network interfaces |ZYXEL MES3500-24S: SFP {#SNMPINDEX}: Date code |

MIB: ZYXEL-TRANSCEIVER-MIB

Transceiver module vendor's manufacturing date code.

|SNMP |zyxel.3500_24s.sfp.datecode[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Network interfaces |ZYXEL MES3500-24S: SFP {#SNMPINDEX}: Transceiver |

MIB: ZYXEL-TRANSCEIVER-MIB

Transceiver module type names.

|SNMP |zyxel.3500_24s.sfp.transceiver[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Network interfaces |ZYXEL MES3500-24S: SFP {#ZYXEL.SFP.PORT}: {#ZYXEL.SFP.DESCRIPTION} |

MIB: ZYXEL-TRANSCEIVER-MIB

Transceiver module DDM data ({#ZYXEL.SFP.DESCRIPTION}).

|SNMP |zyxel.3500_24s.sfp.ddm[{#SNMPINDEX}]

**Preprocessing**:

- MULTIPLIER: `0.01`

- DISCARD_UNCHANGED_HEARTBEAT: `6h`

| |Power supply |ZYXEL MES3500-24S: Nominal "{#ZYXEL.DESCRIPTION}" |

MIB: ZYXEL-HW-MONITOR-MIB

The current voltage reading.

|SNMP |zyxel.3500_24s.volt[{#SNMPINDEX}]

**Preprocessing**:

- MULTIPLIER: `0.001`

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Status |ZYXEL MES3500-24S: SNMP agent availability |

|INTERNAL |zabbix[host,snmp,available]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| |Status |ZYXEL MES3500-24S: Uptime |

MIB: RFC1213-MIB

The time (in hundredths of a second) since the

network management portion of the system was last

re-initialized.

|SNMP |zyxel.3500_24s.uptime

**Preprocessing**:

- MULTIPLIER: `0.01`

| |Temperature |ZYXEL MES3500-24S: Temperature "{#ZYXEL.TEMPDESCRIPTION}" |

MIB: ZYXEL-HW-MONITOR-MIB

The current temperature measured at this sensor

|SNMP |zyxel.3500_24s.temp[{#SNMPINDEX}]

**Preprocessing**:

- DISCARD_UNCHANGED_HEARTBEAT: `1h`

| ## Triggers |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| |ZYXEL MES3500-24S: High CPU utilization (over {$CPU.UTIL.CRIT}% for 5m) |

CPU utilization is too high. The system might be slow to respond.

|`min(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.cpuusage,5m)>{$CPU.UTIL.CRIT}` |WARNING | | |ZYXEL MES3500-24S: {#ZYXEL.FAN.DESCRIPTION} is in critical state |

Please check the fan unit

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.fan[{#SNMPINDEX}])<{#ZYXEL.FANRPM.THRESH.LOW}` |AVERAGE | | |ZYXEL MES3500-24S: Template does not match hardware |

This template is for Zyxel MES3500-24S series, but connected to {ITEM.VALUE}

Firmware version has changed. Ack to close

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.fwversion,#1)<>last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.fwversion,#2) and length(last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.fwversion))>0` |INFO |

Manual close: YES

| |ZYXEL MES3500-24S: Device has been replaced (new serial number received) |

Device serial number has changed. Ack to close

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.serialnumber,#1)<>last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.serialnumber,#2) and length(last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.serialnumber))>0` |INFO |

Manual close: YES

| |ZYXEL MES3500-24S: High memory utilization (>{$MEMORY.UTIL.MAX}% for 5m) |

The system is running out of free memory.

|`min(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.memusage,5m)>{$MEMORY.UTIL.MAX}` |AVERAGE | | |ZYXEL MES3500-24S: Port {#SNMPINDEX}: Link down |

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.net.if.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.net.if.operstatus[{#SNMPINDEX}],#2)`

Recovery expression:

`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.net.if.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |

Manual close: YES

| |ZYXEL MES3500-24S: SFP {#SNMPINDEX} has been replaced (new serial number received) |

SFP {#SNMPINDEX} serial number has changed. Ack to close

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.sfp.serialnumber[{#SNMPINDEX}],#1)<>last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.sfp.serialnumber[{#SNMPINDEX}],#2) and length(last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.sfp.serialnumber[{#SNMPINDEX}]))>0` |INFO |

Manual close: YES

| |ZYXEL MES3500-24S: SFP {#ZYXEL.SFP.PORT}: High {#ZYXEL.SFP.DESCRIPTION} (over {#ZYXEL.SFP.WARN.MAX}{#ZYXEL.SFP.UNIT}) |

The upper threshold value of the parameter is exceeded

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.sfp.ddm[{#SNMPINDEX}]) > {#ZYXEL.SFP.WARN.MAX}` |WARNING | | |ZYXEL MES3500-24S: SFP {#ZYXEL.SFP.PORT}: Low {#ZYXEL.SFP.DESCRIPTION} (less than {#ZYXEL.SFP.WARN.MIN}{#ZYXEL.SFP.UNIT}) |

The parameter values are less than the lower threshold

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.sfp.ddm[{#SNMPINDEX}]) < {#ZYXEL.SFP.WARN.MIN}` |WARNING | | |ZYXEL MES3500-24S: Voltage {#ZYXEL.DESCRIPTION} is in critical state |

Please check the power supply

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW}` |AVERAGE | | |ZYXEL MES3500-24S: No SNMP data collection |

SNMP is not available for polling. Please check device connectivity and SNMP settings.

|`max(/ZYXEL MES3500-24S SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING | | |ZYXEL MES3500-24S: has been restarted (uptime < 10m) |

Uptime is less than 10 minutes

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.uptime)<10m` |INFO |

Manual close: YES

| |ZYXEL MES3500-24S: Temperature {#ZYXEL.TEMPDESCRIPTION} is in critical state |

Please check the temperature

|`last(/ZYXEL MES3500-24S SNMP/zyxel.3500_24s.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH}` |AVERAGE | | ## Feedback Please report any issues with the template at https://support.zabbix.com You can also provide feedback, discuss the template or ask for help with it at [ZABBIX forums](https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/422668-discussion-thread-for-official-zabbix-templates-for-zyxel). ## Known Issues - Description: Incorrect handling of SNMP bulk requests. Disable the use of bulk requests in the SNMP interface settings. - Version: all versions firmware - Device: ZYXEL MGS3520-28