path: root/src/go/conf/zabbix_agent2.conf

# This is a configuration file for Zabbix agent 2 (Unix)
# To get more information about Zabbix, visit http://www.zabbix.com

############ GENERAL PARAMETERS #################

### Option: PidFile
#	Name of PID file.
#
# Mandatory: no
# Default:
# PidFile=/tmp/zabbix_agent2.pid

### Option: LogType
#	Specifies where log messages are written to:
#		system  - syslog
#		file    - file specified with LogFile parameter
#		console - standard output
#
# Mandatory: no
# Default:
# LogType=file

### Option: LogFile
#	Log file name for LogType 'file' parameter.
#
# Mandatory: yes, if LogType is set to file, otherwise no
# Default:
# LogFile=/tmp/zabbix_agent2.log

### Option: LogFileSize
#	Maximum size of log file in MB.
#	0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
# LogFileSize=1

### Option: DebugLevel
#	Specifies debug level:
#	0 - basic information about starting and stopping of Zabbix processes
#	1 - critical information
#	2 - error information
#	3 - warnings
#	4 - for debugging (produces lots of information)
#	5 - extended debugging (produces even more information)
#
# Mandatory: no
# Range: 0-5
# Default:
# DebugLevel=3

### Option: SourceIP
#	Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=

##### Passive checks related

### Option: Server
#	List of comma delimited IP addresses, optionally in CIDR notation, or DNS names of Zabbix servers and Zabbix proxies.
#	Incoming connections will be accepted only from the hosts listed here.
#	If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally
#	and '::/0' will allow any IPv4 or IPv6 address.
#	'0.0.0.0/0' can be used to allow any IPv4 address.
#	Example: Server=127.0.0.1,192.168.1.0/24,::1,2001:db8::/32,zabbix.example.com
#
# Mandatory: yes, if StartAgents is not explicitly set to 0
# Default:
# Server=

Server=127.0.0.1

### Option: ListenPort
#	Agent will listen on this port for connections from the server.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# ListenPort=10050

### Option: ListenIP
#	List of comma delimited IP addresses that the agent should listen on.
#	First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0

### Option: StatusPort
#	Agent will listen on this port for HTTP status requests.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# StatusPort=

##### Active checks related

### Option: ServerActive
#	List of comma delimited IP:port (or DNS name:port) pairs of Zabbix servers and Zabbix proxies for active checks.
#	If port is not specified, default port is used.
#	IPv6 addresses must be enclosed in square brackets if port for that host is specified.
#	If port is not specified, square brackets for IPv6 addresses are optional.
#	If this parameter is not specified, active checks are disabled.
#	Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
#
# Mandatory: no
# Default:
# ServerActive=

ServerActive=127.0.0.1

### Option: Hostname
#	List of comma delimited unique, case sensitive hostnames.
#	Required for active checks and must match hostnames as configured on the server.
#	Value is acquired from HostnameItem if undefined.
#
# Mandatory: no
# Default:
# Hostname=

Hostname=Zabbix server

### Option: HostnameItem
#	Item used for generating Hostname if it is undefined. Ignored if Hostname is defined.
#	Does not support UserParameters or aliases.
#
# Mandatory: no
# Default:
# HostnameItem=system.hostname

### Option: HostMetadata
#	Optional parameter that defines host metadata.
#	Host metadata is used at host auto-registration process.
#	An agent will issue an error and not start if the value is over limit of 255 characters.
#	If not defined, value will be acquired from HostMetadataItem.
#
# Mandatory: no
# Range: 0-255 characters
# Default:
# HostMetadata=

### Option: HostMetadataItem
#	Optional parameter that defines an item used for getting host metadata.
#	Host metadata is used at host auto-registration process.
#	During an auto-registration request an agent will log a warning message if
#	the value returned by specified item is over limit of 255 characters.
#	This option is only used when HostMetadata is not defined.
#
# Mandatory: no
# Default:
# HostMetadataItem=

### Option: HostInterface
#	Optional parameter that defines host interface.
#	Host interface is used at host auto-registration process.
#	An agent will issue an error and not start if the value is over limit of 255 characters.
#	If not defined, value will be acquired from HostInterfaceItem.
#
# Mandatory: no
# Range: 0-255 characters
# Default:
# HostInterface=

### Option: HostInterfaceItem
#	Optional parameter that defines an item used for getting host interface.
#	Host interface is used at host auto-registration process.
#	During an auto-registration request an agent will log a warning message if
#	the value returned by specified item is over limit of 255 characters.
#	This option is only used when HostInterface is not defined.
#
# Mandatory: no
# Default:
# HostInterfaceItem=

### Option: RefreshActiveChecks
#	How often list of active checks is refreshed, in seconds.
#
# Mandatory: no
# Range: 60-3600
# Default:
# RefreshActiveChecks=120

### Option: BufferSend
#	Do not keep data longer than N seconds in buffer.
#
# Mandatory: no
# Range: 1-3600
# Default:
# BufferSend=5

### Option: BufferSize
#	Maximum number of values in a memory buffer. The agent will send
#	all collected data to Zabbix Server or Proxy if the buffer is full.
#	Option is not valid if EnablePersistentBuffer=1
#
# Mandatory: no
# Range: 2-65535
# Default:
# BufferSize=100

### Option: EnablePersistentBuffer
#	Enable usage of local persistent storage for active items.
#	0 - disabled, in-memory buffer is used (default); 1 - use persistent buffer
# Mandatory: no
# Range: 0-1
# Default:
# EnablePersistentBuffer=0

### Option: PersistentBufferPeriod
#	Zabbix Agent2 will keep data for this time period in case of no
#	connectivity with Zabbix server or proxy. Older data will be lost. Log data will be preserved.
#	Option is valid if EnablePersistentBuffer=1
#
# Mandatory: no
# Range: 1m-365d
# Default:
# PersistentBufferPeriod=1h

### Option: PersistentBufferFile
#	Full filename. Zabbix Agent2 will keep SQLite database in this file.
#	Option is valid if EnablePersistentBuffer=1
#
# Mandatory: no
# Default:
# PersistentBufferFile=

############ ADVANCED PARAMETERS #################

### Option: Alias
#	Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one.
#	Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed.
#	Different Alias keys may reference the same item key.
#	For example, to retrieve the ID of user 'zabbix':
#	Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
#	Now shorthand key zabbix.userid may be used to retrieve data.
#	Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
#
# Mandatory: no
# Range:
# Default:

### Option: Timeout
#	Spend no more than Timeout seconds on processing
#
# Mandatory: no
# Range: 1-30
# Default:
# Timeout=3

### Option: Include
#	You may include individual files or all files in a directory in the configuration file.
#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
# Include=

# Include=/usr/local/etc/zabbix_agentd.userparams.conf
# Include=/usr/local/etc/zabbix_agentd.conf.d/
# Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf

####### USER-DEFINED MONITORED PARAMETERS #######

### Option: UnsafeUserParameters
#	Allow all characters to be passed in arguments to user-defined parameters.
#	The following characters are not allowed:
#	\ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @
#	Additionally, newline characters are not allowed.
#	0 - do not allow
#	1 - allow
#
# Mandatory: no
# Range: 0-1
# Default:
# UnsafeUserParameters=0

### Option: UserParameter
#	User-defined parameter to monitor. There can be several user-defined parameters.
#	Format: UserParameter=<key>,<shell command>
#	See 'zabbix_agentd' directory for examples.
#
# Mandatory: no
# Default:
# UserParameter=

### Option: UserParameterDir
#	Directory to execute UserParameter commands from. Only one entry is allowed.
#	When executing UserParameter commands the agent will change the working directory to the one
#	specified in the UserParameterDir option.
#	This way UserParameter commands can be specified using the relative ./ prefix.
#
# Mandatory: no
# Default:
# UserParameterDir=

### Option: ControlSocket
#	The control socket, used to send runtime commands with '-R' option.
#
# Mandatory: no
# Default:
# ControlSocket=

ControlSocket=/tmp/agent.sock

####### TLS-RELATED PARAMETERS #######

### Option: TLSConnect
#	How the agent should connect to server or proxy. Used for active checks.
#	Only one value can be specified:
#		unencrypted - connect without encryption
#		psk         - connect using TLS and a pre-shared key
#		cert        - connect using TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
# TLSConnect=unencrypted

### Option: TLSAccept
#	What incoming connections to accept.
#	Multiple values can be specified, separated by comma:
#		unencrypted - accept connections without encryption
#		psk         - accept connections secured with TLS and a pre-shared key
#		cert        - accept connections secured with TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
# TLSAccept=unencrypted

### Option: TLSCAFile
#	Full pathname of a file containing the top-level CA(s) certificates for
#	peer certificate verification.
#
# Mandatory: no
# Default:
# TLSCAFile=

### Option: TLSCRLFile
#	Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
# TLSCRLFile=

### Option: TLSServerCertIssuer
#		Allowed server certificate issuer.
#
# Mandatory: no
# Default:
# TLSServerCertIssuer=

### Option: TLSServerCertSubject
#		Allowed server certificate subject.
#
# Mandatory: no
# Default:
# TLSServerCertSubject=

### Option: TLSCertFile
#	Full pathname of a file containing the agent certificate or certificate chain.
#
# Mandatory: no
# Default:
# TLSCertFile=

### Option: TLSKeyFile
#	Full pathname of a file containing the agent private key.
#
# Mandatory: no
# Default:
# TLSKeyFile=

### Option: TLSPSKIdentity
#	Unique, case sensitive string used to identify the pre-shared key.
#
# Mandatory: no
# Default:
# TLSPSKIdentity=

### Option: TLSPSKFile
#	Full pathname of a file containing the pre-shared key.
#
# Mandatory: no
# Default:
# TLSPSKFile=

####### PLUGIN-SPECIFIC PARAMETERS #######

### Option: Plugins
#	A plugin can have one or more plugin specific configuration parameters in format:
#     Plugins.<PluginName>.<Parameter1>=<value1>
#     Plugins.<PluginName>.<Parameter2>=<value2>
#
# Mandatory: no
# Range:
# Default:

### Option: Plugins.Log.MaxLinesPerSecond
#	Maximum number of new lines the agent will send per second to Zabbix Server
#	or Proxy processing 'log' and 'logrt' active checks.
#	The provided value will be overridden by the parameter 'maxlines',
#	provided in 'log' or 'logrt' item keys.
#
# Mandatory: no
# Range: 1-1000
# Default:
# Plugins.Log.MaxLinesPerSecond=20

### Option: AllowKey
#	Allow execution of item keys matching pattern.
#	Multiple keys matching rules may be defined in combination with DenyKey.
#	Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position. It might be used in both key name and key arguments.
#	Parameters are processed one by one according their appearance order.
#	If no AllowKey or DenyKey rules defined, all keys are allowed.
#
# Mandatory: no

### Option: DenyKey
#	Deny execution of items keys matching pattern.
#	Multiple keys matching rules may be defined in combination with AllowKey.
#	Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position. It might be used in both key name and key arguments.
#	Parameters are processed one by one according their appearance order.
#	If no AllowKey or DenyKey rules defined, all keys are allowed.
#       Unless another system.run[*] rule is specified DenyKey=system.run[*] is added by default.
#
# Mandatory: no
# Default:
# DenyKey=system.run[*]

### Option: Plugins.SystemRun.LogRemoteCommands
#	Enable logging of executed shell commands as warnings.
#	0 - disabled
#	1 - enabled
#
# Mandatory: no
# Default:
# Plugins.SystemRun.LogRemoteCommands=0

### Option: Plugins.Docker.Endpoint
#	Docker API endpoint.
#
# Mandatory: no
# Default: unix:///var/run/docker.sock
# Plugins.Docker.Endpoint=unix:///var/run/docker.sock

### Option: Plugins.Ceph.InsecureSkipVerify
#	InsecureSkipVerify controls whether an http client verifies the	server's certificate chain and host name.
#	If InsecureSkipVerify is true, TLS accepts any certificate presented by the server and any host name
#	in that certificate. In this mode, TLS is susceptible to man-in-the-middle attacks.
#	This should be used only for testing.
#
# Mandatory: no
# Range: false | true
# Default:
# Plugins.Ceph.InsecureSkipVerify=false

### Option: Plugins.Ceph.KeepAlive
#	Time in seconds for waiting before unused connections will be closed.
#
# Mandatory: no
# Range: 60-900
# Default:
# Plugins.Ceph.KeepAlive=300

### Option: Plugins.Ceph.Timeout
#	The maximum time in seconds for waiting when a request has to be done.
#	The timeout includes connection time, any redirects, and reading the response body.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Ceph.Timeout=<Global timeout>

### Option: Plugins.Ceph.Sessions.*.ApiKey
#	ApiKey to be used for connectione. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Ceph.Sessions.*.ApiKey=

### Option: Plugins.Ceph.Sessions.*.User
#	Username to be used for connection. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Ceph.Sessions.*.User=

### Option: Plugins.Ceph.Sessions.*.Uri
#	Uri to connect. "*" should be replaced with a session name.
#
# Mandatory: no
# Range:
#   Must matches the URI format.
#   The only supported schema is "https".
#   Embedded credentials will be ignored.
# Default:
# Plugins.Ceph.Sessions.*.Uri=

### Option: Plugins.Docker.Timeout
#	The maximum time (in seconds) for waiting when a request has to be done.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Docker.Timeout=<Global timeout>

### Option: Plugins.Memcached.Timeout
#	The maximum time (in seconds) for waiting when a request has to be done.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Memcached.Timeout=<Global timeout>

### Option: Plugins.Memcached.KeepAlive
#	Time in seconds for waiting before unused connections will be closed.
#
# Mandatory: no
# Range: 60-900
# Default:
# Plugins.Memcached.KeepAlive=300

### Option: Plugins.Memcached.Sessions.*.Uri
#	Uri to connect. "*" should be replaced with a session name.
#
# Mandatory: no
# Range:
#   Must matches the URI format.
#   Supported schemas: "tcp" and "unix".
#   Embedded credentials will be ignored.
# Default:
# Plugins.Memcached.Sessions.*.Uri=

### Option: Plugins.Memcached.Sessions.*.User
#	Username to send to protected Memcached server. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Memcached.Sessions.*.User=

### Option: Plugins.Memcached.Sessions.*.Password
#	Password to send to protected Memcached server. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Memcached.Sessions.*.Password=

### Option: Plugins.Modbus.Timeout
#	The maximum time (in seconds) for connections.
#
# Mandatory: no
# Range: 1-30
# Default: global timeout

### Option: Plugins.Modbus.Sessions.*.Endpoint
#	Endpoint is a connection string consisting of a protocol scheme, a host address and a port or seral port name and attributes.
#
# Mandatory: no

### Option: Plugins.Modbus.Sessions.*.SlaveID
#	Slave ID of modbus devices.
#
# Mandatory: no

### Option: Plugins.Modbus.Sessions.*.Timeout
#	The maximum time (in seconds) for connections.
#
# Mandatory: no
# Range: 1-30
# Default: plugin modbus timeout

### Option: Plugins.Mongo.Timeout
#	Amount of time to wait for a server to respond when first connecting and on
#   follow up operations in the session.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Mongo.Timeout=<Global timeout>

### Option: Plugins.Mongo.KeepAlive
#	Time in seconds for waiting before unused connections will be closed.
#
# Mandatory: no
# Range: 60-900
# Default:
# Plugins.Mongo.KeepAlive=300

### Option: Plugins.Mongo.Sessions.*.Uri
#	Uri to connect. "*" should be replaced with a session name.
#
# Mandatory: no
# Range:
#   Must matches the URI format.
#   The only supported schema is "tcp".
#   Embedded credentials will be ignored.
# Default:
# Plugins.Mongo.Sessions.*.Uri=

### Option: Plugins.Mongo.Sessions.*.User
#	Username to send to protected MongoDB server. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Mongo.Sessions.*.User=

### Option: Plugins.Mongo.Sessions.*.Password
#	Password to send to protected MongoDB server. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Mongo.Sessions.*.Password=

### Option: Plugins.MQTT.Timeout
#	The maximum time (in seconds) for connections, disconnections and subscribtions.
#
# Mandatory: no
# Range: 1-30
# Default: global timeout

### Option: Plugins.Mysql.CallTimeout
#	The maximum time in seconds for waiting when a request has to be done.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Mysql.CallTimeout=<Global timeout>

### Option: Plugins.Mysql.Timeout
#	The maximum time in seconds for waiting when a connection has to be established.
#
# Mandatory: no
# Range: 1-30
# Default: global timeout

### Option: Plugins.Mysql.KeepAlive
#	Time (in seconds) to wait before unused connections will be closed.
#
# Mandatory: no
# Range: 60-900
# Default:
# Plugins.Mysql.KeepAlive=300

### Option: Plugins.Mysql.Sessions.*.Uri
#	Connection string. "*" should be replaced with a session name.
#
# Mandatory: no
# Range: Must matches the URI format.
# Default:
# Plugins.Mysql.Sessions.*.Uri=

### Option: Plugins.Mysql.Sessions.*.User
#	Username to be used for MySQL authentication. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Mysql.Sessions.*.User=

### Option: Plugins.Mysql.Sessions.*.Password
#	Password to be used for MySQL authentication. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Mysql.Sessions.*.Password=

### Option: Plugins.Mysql.Sessions.*.TLSConnect
#	Encryption type for MySQL connection. "*" should be replaced with a session name.
#		tls connection required     - required
#		verifies certificates       - verify_ca
#		verify certificates and ip  - verify_full
#
# Mandatory: no
# Default:
# Plugins.Mysql.Sessions.*.TLSConnect=

### Option: Plugins.Mysql.Sessions.*.TLSCAFile
#	Full pathname of a file containing the top-level CA(s) certificates for mysql
#	peer certificate verification.
#
# Mandatory: no
# Default:
# Plugins.Mysql.Sessions.*.TLSCAFile=

### Option: Plugins.Mysql.Sessions.*.TLSCertFile
#	Full pathname of a file containing the mysql certificate or certificate chain.
#
# Mandatory: no
# Default:
# Plugins.Mysql.Sessions.*.TLSCertFile=

### Option: Plugins.Mysql.Sessions.*.TLSKeyFile
#	Full pathname of a file containing the mysql private key.
#
# Mandatory: no
# Default:
# Plugins.Mysql.Sessions.*.TLSKeyFile=

### Option: Plugins.Oracle.CallTimeout
#	The maximum time in seconds for waiting when a request has to be done.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Oracle.CallTimeout=<Global timeout>

### Option: Plugins.Oracle.ConnectTimeout
#	The maximum time in seconds for waiting when a connection has to be established.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Oracle.ConnectTimeout=<Global timeout>

### Option: Plugins.Oracle.CustomQueriesPath
#	Full pathname of a directory containing *.sql* files with custom queries.
#
# Mandatory: no
# Default:
# Plugins.Oracle.CustomQueriesPath=

### Option: Plugins.Oracle.KeepAlive
#	Time in seconds for waiting before unused connections will be closed.
#
# Mandatory: no
# Range: 60-900
# Default:
# Plugins.Oracle.KeepAlive=300

### Option: Plugins.Oracle.Sessions.*.Uri
#	Uri to connect. "*" should be replaced with a session name.
#
# Mandatory: no
# Range:
#   Must matches the URI format.
#   The only supported schema is "tcp".
#   Embedded credentials will be ignored.
# Default:
# Plugins.Oracle.Sessions.*.Uri=

### Option: Plugins.Oracle.Sessions.*.Service
#	Service name to be used for connection. "*" should be replaced with a session name.
#
# Mandatory: no
# Range: SID is not supported.
# Default:
# Plugins.Oracle.Sessions.*.Service=

### Option: Plugins.Oracle.Sessions.*.User
#	Username to be used for connection. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Oracle.Sessions.*.User=

### Option: Plugins.Oracle.Sessions.*.Password
#	Password to be used for connectione. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Oracle.Sessions.*.Password=

### Option: Plugins.Postgres.CallTimeout
#	The maximum time in seconds for waiting when a request has to be done.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Postgres.CallTimeout=<Global timeout>

### Option: Plugins.Postgres.Timeout
#	The maximum time in seconds for waiting when a connection has to be established.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Postgres.Timeout=<Global timeout>

### Option: Plugins.Postgres.KeepAlive
#   Time in seconds for waiting before unused connections will be closed.
#
# Mandatory: no
# Range: 60-900
# Default:
# Plugins.Postgres.KeepAlive=300

### Option: Plugins.Postgres.CustomQueriesPath
#	Full pathname of a directory containing *.sql* files with custom queries.
#
# Mandatory: no
# Default:
# Plugins.Postgres.CustomQueriesPath=

### Option: Plugins.Postgres.Sessions.*.Uri
#	Uri to connect. "*" should be replaced with a session name.
#
# Mandatory: no
# Range:
#   Must matches the URI format.
#   Supported schemas: "tcp" and "unix".
#   Embedded credentials will be ignored.
# Default:
# Plugins.Postgres.Sessions.*.Uri=

### Option: Plugins.Postgres.Sessions.*.User
#	Username for session connection. "*" should be replaced with a session name.
#
# Mandatory: no
# Range: Must matches PostgreSQL user name.
# Default:
# Plugins.Postgres.Sessions.*.User=

### Option: Plugins.Postgres.Sessions.*.Password
#	Password for session connection. "*" should be replaced with a session name.
#
# Mandatory: no
# Range: Must matches the Password format.
# Default:
# Plugins.Postgres.Sessions.*.Password=

### Option: Plugins.Postgres.Sessions.*.Database
#	Database for session connection. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Postgres.Sessions.*.Database=

### Option: Plugins.Postgres.Sessions.*.TLSConnect
#	Encryption type for Postgres connection. "*" should be replaced with a session name.
#		tls connection required     - required
#		verifies certificates       - verify_ca
#		verify certificates and ip  - verify_full
#
# Mandatory: no
# Default:
# Plugins.Postgres.Sessions.*.TLSConnect=

### Option: Plugins.Postgres.Sessions.*.TLSCAFile
#	Full pathname of a file containing the top-level CA(s) certificate
#	peer certificate verification.
#
# Mandatory: no
# Default:
# Plugins.Postgres.Sessions.*.TLSCAFile=

### Option: Plugins.Postgres.Sessions.*.TLSCertFile
#	Full pathname of a file containing the postgres certificate or certificate chain.
#
# Mandatory: no
# Default:
# Plugins.Postgres.Sessions.*.TLSCertFile=

### Option: Plugins.Postgres.Sessions.*.TLSKeyFile
#	Full pathname of a file containing the postgres private key.
#
# Mandatory: no
# Default:
# Plugins.Postgres.Sessions.*.TLSKeyFile=

### Option: Plugins.Redis.Uri
#	Uri to connect. Can be overwritten by the first parameter of an item's key.
#
# Mandatory: no
# Range:
#   Must matches the URI format.
#   Supported schemas: "tcp" and "unix".
#   Embedded credentials will be ignored.
# Default:
# Plugins.Redis.Uri=tcp://localhost:6379

### Option: Plugins.Redis.Timeout
#	The maximum time (in seconds) for waiting when a request has to be done.
#
# Mandatory: no
# Range: 1-30
# Default:
# Plugins.Redis.Timeout=<Global timeout>

### Option: Plugins.Redis.KeepAlive
#	Time in seconds for waiting before unused connections will be closed.
#
# Mandatory: no
# Range: 60-900
# Default:
# Plugins.Redis.KeepAlive=300

### Option: Plugins.Redis.Sessions.*.Uri
#	Uri to connect. "*" should be replaced with a session name.
#
# Mandatory: no
# Range:
#   Must matches the URI format.
#   Supported schemas: "tcp" and "unix".
#   Embedded credentials will be ignored.
# Default:
# Plugins.Redis.Sessions.*.Uri=

### Option: Plugins.Redis.Sessions.*.Password
#	Password to send to protected Redis server. "*" should be replaced with a session name.
#
# Mandatory: no
# Default:
# Plugins.Redis.Sessions.*.Password=

### Option: Plugins.Smart.Timeout
#	The maximum time in seconds for waiting before smartctl execution is terminated.
#	The timeout is for a single smartctl command line execution.
#
# Mandatory: no
# Range: 1-30
# Default: <Global timeout>
# Plugins.Smart.Timeout=

### Option: Plugins.Smart.Path
#	Path to smartctl executable.
#
# Mandatory: no
# Default: smartctl
# Plugins.Smart.Path=

### Option: ForceActiveChecksOnStart
#	Perform active checks immediately after restart for first received configuration.
#	Also available as per plugin configuration, example: Plugins.Uptime.ForceActiveChecksOnStart=1
#
# Mandatory: no
# Range: 0-1
# Default:
# ForceActiveChecksOnStart=0