path: root/templates/power/apc/apc_ups_symmetra_rx_snmp/template_power_apc_ups_symmetra_rx_snmp.yaml

zabbix_export:
  version: '5.4'
  date: '2021-05-09T00:00:00Z'
  groups:
    -
      name: Templates/Power
  templates:
    -
      template: 'APC UPS Symmetra RX SNMP'
      name: 'APC UPS Symmetra RX SNMP'
      description: |
        Template Power APC UPS Symmetra RX
        
        MIBs used:
        PowerNet-MIB
        SNMPv2-MIB
        
        You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/420730-discussion-thread-for-official-zabbix-template-apc-ups
        
        Template tooling version used: 0.38
      groups:
        -
          name: Templates/Power
      items:
        -
          name: 'Battery capacity'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.3.1.0
          key: 'battery.capacity[upsHighPrecBatteryCapacity]'
          history: 7d
          value_type: FLOAT
          units: '%'
          description: |
            MIB: PowerNet-MIB
            The remaining battery capacity expressed as
             percentage of full capacity.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.1'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/battery.capacity[upsHighPrecBatteryCapacity]) < {$BATTERY.CAPACITY.MIN.WARN}'
              name: 'Battery has low capacity (below {$BATTERY.CAPACITY.MIN.WARN}%)'
              opdata: 'Current capacity: {ITEM.LASTVALUE1}'
              priority: HIGH
        -
          name: 'External battery packs count'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.2.5.0
          key: 'battery.external_packs_count[upsAdvBatteryNumOfBattPacks]'
          delay: 1h
          history: 7d
          description: |
            MIB: PowerNet-MIB
            The number of external battery packs connected to the UPS. If
             the UPS does not use smart cells then the agent reports
             ERROR_NO_SUCH_NAME.
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
        -
          name: 'Battery last replace date'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.1.3.0
          key: 'battery.last_replace_date[upsBasicBatteryLastReplaceDate]'
          delay: 1h
          history: 7d
          trends: '0'
          value_type: CHAR
          description: |
            MIB: PowerNet-MIB
            The date when the UPS system's batteries were last replaced
             in mm/dd/yy (or yyyy) format. For Smart-UPS models, this value
             is originally set at the factory. When the UPS batteries
             are replaced, this value should be reset by the administrator.
             For Symmetra PX 250/500 this OID is read-only and is configurable in the local display only.
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
        -
          name: 'Battery replace indicator'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.2.4.0
          key: 'battery.replace_indicator[upsAdvBatteryReplaceIndicator]'
          history: 7d
          description: |
            MIB: PowerNet-MIB
            Indicates whether the UPS batteries need replacement.
          valuemap:
            name: 'PowerNet-MIB::upsAdvBatteryReplaceIndicator'
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/battery.replace_indicator[upsAdvBatteryReplaceIndicator])=2'
              name: 'Battery needs replacement'
              priority: HIGH
              description: 'A battery installed has an internal error condition.'
        -
          name: 'Battery runtime remaining'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.2.3.0
          key: 'battery.runtime_remaining[upsAdvBatteryRunTimeRemaining]'
          history: 7d
          value_type: FLOAT
          units: s
          description: |
            MIB: PowerNet-MIB
            The UPS battery run time remaining before battery
             exhaustion.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.01'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
        -
          name: 'Battery status'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.1.1.0
          key: 'battery.status[upsBasicBatteryStatus]'
          history: 7d
          description: |
            MIB: PowerNet-MIB
            The status of the UPS batteries. A batteryLow(3) value
             indicates the UPS will be unable to sustain the current
             load, and its services will be lost if power is not restored.
             The amount of run time in reserve at the time of low battery
             can be configured by the upsAdvConfigLowBatteryRunTime.
             A batteryInFaultCondition(4)value indicates that a battery
             installed has an internal error condition.
          valuemap:
            name: 'PowerNet-MIB::upsBasicBatteryStatus'
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/battery.status[upsBasicBatteryStatus])=4'
              name: 'Battery has an internal error condition'
              priority: AVERAGE
              description: 'A battery installed has an internal error condition.'
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/battery.status[upsBasicBatteryStatus])=3'
              name: 'Battery is Low'
              priority: AVERAGE
              description: 'The UPS will be unable to sustain the current load, and its services will be lost if power is not restored.'
        -
          name: 'Battery temperature'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.3.2.0
          key: 'battery.temperature[upsHighPrecBatteryTemperature]'
          history: 7d
          value_type: FLOAT
          units: ℃
          description: |
            MIB: PowerNet-MIB
            The current internal UPS temperature in Celsius.
             Temperatures below zero read as 0.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.1'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'min(/APC UPS Symmetra RX SNMP/battery.temperature[upsHighPrecBatteryTemperature],{$TIME.PERIOD}) > {$BATTERY.TEMP.MAX.WARN}'
              name: 'Battery has high temperature (over {$BATTERY.TEMP.MAX.WARN}℃ for {$TIME.PERIOD})'
              opdata: 'Current temperature: {ITEM.LASTVALUE1}'
              priority: HIGH
        -
          name: 'Battery voltage'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.3.4.0
          key: 'battery.voltage[upsHighPrecBatteryActualVoltage]'
          history: 7d
          value_type: FLOAT
          units: V
          description: |
            MIB: PowerNet-MIB
            The actual battery bus voltage in Volts.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.1'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
        -
          name: 'Input fail cause'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.3.2.5.0
          key: 'input.fail[upsAdvInputLineFailCause]'
          history: 7d
          description: |
            MIB: PowerNet-MIB
            The reason for the occurrence of the last transfer to UPS
            battery power.  The variable is set to:
            - noTransfer(1) -- if there is no transfer yet.
            - highLineVoltage(2) -- if the transfer to battery is caused
            by an over voltage greater than the high transfer voltage.
            - brownout(3) -- if the duration of the outage is greater than
            five seconds and the line voltage is between 40% of the
            rated output voltage and the low transfer voltage.
            - blackout(4) -- if the duration of the outage is greater than five
            seconds and the line voltage is between 40% of the rated
            output voltage and ground.
            - smallMomentarySag(5) -- if the duration of the outage is less
            than five seconds and the line voltage is between 40% of the
            rated output voltage and the low transfer voltage.
            - deepMomentarySag(6) -- if the duration of the outage is less
            than five seconds and the line voltage is between 40% of the
            rated output voltage and ground.  The variable is set to
            - smallMomentarySpike(7) -- if the line failure is caused by a
            rate of change of input voltage less than ten volts per cycle.
            - largeMomentarySpike(8) -- if the line failure is caused by
            a rate of change of input voltage greater than ten volts per cycle.
            - selfTest(9) -- if the UPS was commanded to do a self test.
            - rateOfVoltageChange(10) -- if the failure is due to the rate of change of
            the line voltage.
          valuemap:
            name: 'PowerNet-MIB::upsAdvInputLineFailCause'
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
        -
          name: 'Input frequency'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.3.3.4.0
          key: 'input.frequency[upsHighPrecInputFrequency]'
          history: 7d
          value_type: FLOAT
          units: Hz
          description: |
            MIB: PowerNet-MIB
            The current input frequency to the UPS system in Hz.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.1'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'min(/APC UPS Symmetra RX SNMP/input.frequency[upsHighPrecInputFrequency],{$TIME.PERIOD}) > 0 and (min(/APC UPS Symmetra RX SNMP/input.frequency[upsHighPrecInputFrequency],{$TIME.PERIOD}) > {$UPS.INPUT_FREQ.MAX.WARN} or max(/APC UPS Symmetra RX SNMP/input.frequency[upsHighPrecInputFrequency],{$TIME.PERIOD}) < {$UPS.INPUT_FREQ.MIN.WARN})'
              name: 'Unacceptable input frequency (out of range {$UPS.INPUT_FREQ.MIN.WARN}-{$UPS.INPUT_FREQ.MAX.WARN}Hz for {$TIME.PERIOD})'
              opdata: 'Current frequency: {ITEM.LASTVALUE1}'
              priority: HIGH
        -
          name: 'Input voltage'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.3.3.1.0
          key: 'input.voltage[upsHighPrecInputLineVoltage]'
          history: 7d
          value_type: FLOAT
          units: V
          description: |
            MIB: PowerNet-MIB
            The current utility line voltage in VAC.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.1'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'min(/APC UPS Symmetra RX SNMP/input.voltage[upsHighPrecInputLineVoltage],{$TIME.PERIOD}) > 0 and (min(/APC UPS Symmetra RX SNMP/input.voltage[upsHighPrecInputLineVoltage],{$TIME.PERIOD}) > {$UPS.INPUT_VOLT.MAX.WARN} or max(/APC UPS Symmetra RX SNMP/input.voltage[upsHighPrecInputLineVoltage],{$TIME.PERIOD}) < {$UPS.INPUT_VOLT.MIN.WARN})'
              name: 'Unacceptable input voltage (out of range {$UPS.INPUT_VOLT.MIN.WARN}-{$UPS.INPUT_VOLT.MAX.WARN}V for {$TIME.PERIOD})'
              opdata: 'Current voltage: {ITEM.LASTVALUE1}'
              priority: HIGH
        -
          name: 'Output current'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.4.3.4.0
          key: 'output.current[upsHighPrecOutputCurrent]'
          history: 7d
          value_type: FLOAT
          units: A
          description: |
            MIB: PowerNet-MIB
            The current in amperes drawn by the load on the UPS.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.1'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
        -
          name: 'Output load'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.4.3.3.0
          key: 'output.load[upsHighPrecOutputLoad]'
          history: 7d
          value_type: FLOAT
          units: '%'
          description: |
            MIB: PowerNet-MIB
            The current UPS load expressed as percentage
            of rated capacity.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.1'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'min(/APC UPS Symmetra RX SNMP/output.load[upsHighPrecOutputLoad],{$TIME.PERIOD}) > {$UPS.OUTPUT.MAX.WARN}'
              name: 'Output load is high (over {$UPS.OUTPUT.MAX.WARN}% for {$TIME.PERIOD})'
              opdata: 'Current load: {ITEM.LASTVALUE1}'
              priority: HIGH
              description: 'A battery installed has an internal error condition.'
        -
          name: 'Output status'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.4.1.1.0
          key: 'output.status[upsBasicOutputStatus]'
          history: 7d
          description: |
            MIB: PowerNet-MIB
            The current state of the UPS. If the UPS is unable to
             determine the state of the UPS this variable is set
             to unknown(1).
            During self-test most UPSes report onBattery(3) but
             some that support it will report onBatteryTest(15).
             To determine self-test status across all UPSes, refer
             to the upsBasicStateOutputState OID.
          valuemap:
            name: 'PowerNet-MIB::upsBasicOutputStatus'
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=16'
              name: 'UPS is Emergency Static Bypass'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=10'
              name: 'UPS is Hardware Failure Bypass'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=7'
              name: 'UPS is Off'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=3'
              name: 'UPS is on battery'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=4'
              name: 'UPS is on Smart Boost'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=12'
              name: 'UPS is On Smart Trim'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=8'
              name: 'UPS is Rebooting'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=11'
              name: 'UPS is Sleeping Until Power Return'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=6'
              name: 'UPS is Software Bypass'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=9'
              name: 'UPS is Switched Bypass'
              priority: AVERAGE
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/output.status[upsBasicOutputStatus])=5'
              name: 'UPS is Timed Sleeping'
              priority: AVERAGE
        -
          name: 'Output voltage'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.4.3.1.0
          key: 'output.voltage[upsHighPrecOutputVoltage]'
          history: 7d
          value_type: FLOAT
          units: V
          description: |
            MIB: PowerNet-MIB
            The output voltage of the UPS system in VAC.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.1'
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
        -
          name: 'SNMP traps (fallback)'
          type: SNMP_TRAP
          key: snmptrap.fallback
          history: 2w
          trends: '0'
          value_type: LOG
          description: 'Item is used to collect all SNMP traps unmatched by other snmptrap items'
          logtimefmt: 'hh:mm:sszyyyy/MM/dd'
          tags:
            -
              tag: General
        -
          name: 'System contact details'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.2.1.1.4.0
          key: 'system.contact[sysContact.0]'
          delay: 1h
          history: 2w
          trends: '0'
          value_type: CHAR
          description: |
            MIB: SNMPv2-MIB
            The textual identification of the contact person for this managed
            node, together with information on how to contact this person.  If no contact
            information is known, the value is the zero-length string.
          inventory_link: CONTACT
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 1d
          tags:
            -
              tag: General
        -
          name: 'System description'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.2.1.1.1.0
          key: 'system.descr[sysDescr.0]'
          delay: 1h
          history: 2w
          trends: '0'
          value_type: CHAR
          description: |
            MIB: SNMPv2-MIB
            A textual description of the entity. This value should
            include the full name and version identification of the system's hardware type, software operating-system, and
            networking software.
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 1d
          tags:
            -
              tag: General
        -
          name: 'System location'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.2.1.1.6.0
          key: 'system.location[sysLocation.0]'
          delay: 15m
          history: 2w
          trends: '0'
          value_type: CHAR
          description: |
            MIB: SNMPv2-MIB
            The physical location of this node (e.g., `telephone closet,
            3rd floor').  If the location is unknown, the value is the zero-length string.
          inventory_link: LOCATION
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: General
        -
          name: Model
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.1.1.1.0
          key: 'system.model[upsBasicIdentModel]'
          delay: 15m
          history: 7d
          trends: '0'
          value_type: CHAR
          description: |
            MIB: PowerNet-MIB
            The UPS model name (e.g. 'APC Smart-UPS 600').
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: General
        -
          name: 'System name'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.2.1.1.5.0
          key: 'system.name[sysName.0]'
          delay: 15m
          history: 2w
          trends: '0'
          value_type: CHAR
          description: |
            MIB: SNMPv2-MIB
            An administratively-assigned name for this managed node.By
            convention, this is the node's fully-qualified domain name.  If the name is unknown,
            the value is the zero-length string.
          inventory_link: NAME
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: General
          triggers:
            -
              expression: '(last(/APC UPS Symmetra RX SNMP/system.name[sysName.0],#1)<>last(/APC UPS Symmetra RX SNMP/system.name[sysName.0],#2))=1 and length(last(/APC UPS Symmetra RX SNMP/system.name[sysName.0]))>0'
              name: 'System name has changed (new name: {ITEM.VALUE})'
              priority: INFO
              description: 'System name has changed. Ack to close.'
              manual_close: 'YES'
        -
          name: 'System object ID'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.2.1.1.2.0
          key: 'system.objectid[sysObjectID.0]'
          delay: 15m
          history: 2w
          trends: '0'
          value_type: CHAR
          description: |
            MIB: SNMPv2-MIB
            The vendor's authoritative identification of the network management
            subsystem contained in the entity.  This value is allocated within the SMI enterprises
            subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what
            kind of box' is being managed.  For example, if vendor`Flintstones, Inc.' was
            assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1
            to its `Fred Router'.
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: General
        -
          name: 'Serial number'
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.4.1.318.1.1.1.1.2.3.0
          key: 'system.sn[upsAdvIdentSerialNumber]'
          delay: 15m
          history: 7d
          trends: '0'
          value_type: CHAR
          description: |
            MIB: PowerNet-MIB
            An 8-character string identifying the serial number of
             the UPS internal microprocessor.  This number is set at
             the factory.  NOTE: This number does NOT correspond to
             the serial number on the rear of the UPS.
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: General
        -
          name: Uptime
          type: SNMP_AGENT
          snmp_oid: 1.3.6.1.2.1.1.3.0
          key: 'system.uptime[sysUpTime.0]'
          delay: 30s
          history: 2w
          trends: 0d
          units: uptime
          description: |
            MIB: SNMPv2-MIB
            The time (in hundredths of a second) since the network management
            portion of the system was last re-initialized.
          preprocessing:
            -
              type: MULTIPLIER
              parameters:
                - '0.01'
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'last(/APC UPS Symmetra RX SNMP/system.uptime[sysUpTime.0])<10m'
              name: '{HOST.NAME} has been restarted (uptime < 10m)'
              priority: WARNING
              description: 'Uptime is less than 10 minutes'
              manual_close: 'YES'
              dependencies:
                -
                  name: 'No SNMP data collection'
                  expression: 'max(/APC UPS Symmetra RX SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0'
        -
          name: 'SNMP agent availability'
          type: INTERNAL
          key: 'zabbix[host,snmp,available]'
          history: 7d
          valuemap:
            name: zabbix.host.available
          preprocessing:
            -
              type: DISCARD_UNCHANGED_HEARTBEAT
              parameters:
                - 6h
          tags:
            -
              tag: Status
          triggers:
            -
              expression: 'max(/APC UPS Symmetra RX SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0'
              name: 'No SNMP data collection'
              opdata: 'Current state: {ITEM.LASTVALUE1}'
              priority: WARNING
              description: 'SNMP is not available for polling. Please check device connectivity and SNMP settings.'
      discovery_rules:
        -
          name: 'External bad battery packs discovery'
          type: SNMP_AGENT
          snmp_oid: 'discovery[{#EXTERNAL_PACKS},1.3.6.1.4.1.318.1.1.1.2.2.6]'
          key: battery.packs.bad.discovery
          delay: 1h
          description: 'Discovery of the number of external defective battery packs.'
          item_prototypes:
            -
              name: '{#SNMPINDEX}: External battery packs bad'
              type: SNMP_AGENT
              snmp_oid: 1.3.6.1.4.1.318.1.1.1.2.2.6.0
              key: 'battery.external_packs_bad[upsAdvBatteryNumOfBadBattPacks.{#SNMPINDEX}]'
              delay: 15m
              history: 7d
              description: |
                MIB: PowerNet-MIB
                The number of external battery packs connected to the UPS that
                are defective. If the UPS does not use smart cells then the
                agent reports ERROR_NO_SUCH_NAME.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
        -
          name: 'External battery packs discovery'
          type: SNMP_AGENT
          snmp_oid: 'discovery[{#CARTRIDGE_STATUS},1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.7,{#BATTERY_PACK},1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.1,{#CARTRIDGE_INDEX},1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.2]'
          key: battery.packs.discovery
          delay: 1h
          filter:
            evaltype: AND
            conditions:
              -
                macro: '{#CARTRIDGE_STATUS}'
                value: ^$
                operator: NOT_MATCHES_REGEX
                formulaid: A
          item_prototypes:
            -
              name: '{#BATTERY_PACK}.{#CARTRIDGE_INDEX}: Battery estimated replace date'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.8.{#SNMPINDEX}'
              key: 'battery.estimated_replace_date[upsHighPrecBatteryPackCartridgeReplaceDate.{#BATTERY_PACK}.{#CARTRIDGE_INDEX}]'
              delay: 1h
              history: 7d
              trends: '0'
              value_type: CHAR
              description: |
                MIB: PowerNet-MIB
                The battery cartridge estimated battery replace date.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
            -
              name: '{#BATTERY_PACK}.{#CARTRIDGE_INDEX}: Battery pack cartridge health'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.7.{#SNMPINDEX}'
              key: 'battery.pack.cartridge_health[upsHighPrecBatteryPackCartridgeHealth.{#BATTERY_PACK}.{#CARTRIDGE_INDEX}]'
              history: 7d
              trends: '0'
              value_type: CHAR
              description: |
                MIB: PowerNet-MIB
                The battery cartridge health.
                  bit 0 Battery lifetime okay
                  bit 1 Battery lifetime near end, order replacement cartridge
                  bit 2 Battery lifetime exceeded, replace battery
                  bit 3 Battery lifetime near end acknowledged, order replacement cartridge
                  bit 4 Battery lifetime exceeded acknowledged, replace battery
                  bit 5 Battery measured lifetime near end, order replacement cartridge
                  bit 6 Battery measured lifetime near end acknowledged, order replacement cartridge
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
              trigger_prototypes:
                -
                  expression: 'find(/APC UPS Symmetra RX SNMP/battery.pack.cartridge_health[upsHighPrecBatteryPackCartridgeHealth.{#BATTERY_PACK}.{#CARTRIDGE_INDEX}],,"regexp","^(0)[0|1]{15}$")=1'
                  name: '{#BATTERY_PACK}.{#CARTRIDGE_INDEX}: Battery lifetime is not okay'
                  opdata: 'Current bit set: {ITEM.LASTVALUE1}'
                  priority: WARNING
                  description: |
                    The battery cartridge health.
                      bit 0 Battery lifetime okay
                      bit 1 Battery lifetime near end, order replacement cartridge
                      bit 2 Battery lifetime exceeded, replace battery
                      bit 3 Battery lifetime near end acknowledged, order replacement cartridge
                      bit 4 Battery lifetime exceeded acknowledged, replace battery
                      bit 5 Battery measured lifetime near end, order replacement cartridge
                      bit 6 Battery measured lifetime near end acknowledged, order replacement cartridge
            -
              name: '{#BATTERY_PACK}.{#CARTRIDGE_INDEX}: Battery status'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.10.{#SNMPINDEX}'
              key: 'battery.pack.status[upsHighPrecBatteryPackCartridgeStatus.{#BATTERY_PACK}.{#CARTRIDGE_INDEX}]'
              history: 7d
              trends: '0'
              value_type: CHAR
              description: |
                MIB: PowerNet-MIB
                The battery cartridge status.
                bit 0 Disconnected
                bit 1 Overvoltage
                bit 2 NeedsReplacement
                bit 3 OvertemperatureCritical
                bit 4 Charger
                bit 5 TemperatureSensor
                bit 6 BusSoftStart
                bit 7 OvertemperatureWarning
                bit 8 GeneralError
                bit 9 Communication
                bit 10 DisconnectedFrame
                bit 11 FirmwareMismatch
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
              trigger_prototypes:
                -
                  expression: 'find(/APC UPS Symmetra RX SNMP/battery.pack.status[upsHighPrecBatteryPackCartridgeStatus.{#BATTERY_PACK}.{#CARTRIDGE_INDEX}],,"regexp","^(0{16})$")=0'
                  name: '{#BATTERY_PACK}.{#CARTRIDGE_INDEX}: Battery status is not okay'
                  opdata: 'Current bit set: {ITEM.LASTVALUE1}'
                  priority: WARNING
                  description: |
                    The battery cartridge status:
                    bit 0 Disconnected
                    bit 1 Overvoltage
                    bit 2 NeedsReplacement
                    bit 3 OvertemperatureCritical
                    bit 4 Charger
                    bit 5 TemperatureSensor
                    bit 6 BusSoftStart
                    bit 7 OvertemperatureWarning
                    bit 8 GeneralError
                    bit 9 Communication
                    bit 10 DisconnectedFrame
                    bit 11 FirmwareMismatch
            -
              name: '{#BATTERY_PACK}.{#CARTRIDGE_INDEX}: Battery temperature'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.5.{#SNMPINDEX}'
              key: 'battery.temperature[upsHighPrecBatteryPackTemperature.{#BATTERY_PACK}.{#CARTRIDGE_INDEX}]'
              history: 7d
              value_type: FLOAT
              units: ℃
              description: |
                MIB: PowerNet-MIB
                The battery pack temperature in Celsius.
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '0.1'
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
              trigger_prototypes:
                -
                  expression: 'min(/APC UPS Symmetra RX SNMP/battery.temperature[upsHighPrecBatteryPackTemperature.{#BATTERY_PACK}.{#CARTRIDGE_INDEX}],{$TIME.PERIOD}) > {$BATTERY.TEMP.MAX.WARN}'
                  name: '{#BATTERY_PACK}.{#CARTRIDGE_INDEX}: Battery has high temperature (over {$BATTERY.TEMP.MAX.WARN}℃ for {$TIME.PERIOD})'
                  opdata: 'Current temperature: {ITEM.LASTVALUE1}'
                  priority: HIGH
            -
              name: '{#BATTERY_PACK}.{#CARTRIDGE_INDEX}: Serial number'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.2.3.10.2.1.4.{#SNMPINDEX}'
              key: 'system.sn[upsHighPrecBatteryPackSerialNumber.{#BATTERY_PACK}.{#CARTRIDGE_INDEX}]'
              delay: 15m
              history: 7d
              trends: '0'
              value_type: CHAR
              description: |
                MIB: PowerNet-MIB
                The battery pack serial number.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: General
        -
          name: 'External sensor port 1 discovery'
          type: SNMP_AGENT
          snmp_oid: 'discovery[{#EXTERNAL_SENSOR1_NAME},1.3.6.1.4.1.318.1.1.25.1.2.1.3]'
          key: external.sensor1.discovery
          delay: 1h
          description: uioSensorStatusTable
          item_prototypes:
            -
              name: '{#EXTERNAL_SENSOR1_NAME}: Humidity sensor'
              type: SNMP_AGENT
              snmp_oid: 1.3.6.1.4.1.318.1.1.25.1.2.1.7.1.1
              key: 'external.sensor.humidity[uioSensorStatusHumidity.1.{#SNMPINDEX}]'
              history: 7d
              value_type: FLOAT
              units: '%'
              description: |
                MIB: PowerNet-MIB
                The sensor's current humidity reading - a relative humidity
                 percentage. -1 indicates an invalid reading due to either a
                 sensor that doesn't read humidity or lost communications.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
            -
              name: '{#EXTERNAL_SENSOR1_NAME}: Sensor alarm status'
              type: SNMP_AGENT
              snmp_oid: 1.3.6.1.4.1.318.1.1.25.1.2.1.9.1.1
              key: 'external.sensor.status[uioSensorStatusAlarmStatus.1.{#SNMPINDEX}]'
              history: 7d
              description: |
                MIB: PowerNet-MIB
                The alarm status of the sensor. Possible values:
                uioNormal                 (1),
                uioWarning                (2),
                uioCritical               (3),
                sensorStatusNotApplicable (4)
              valuemap:
                name: 'PowerNet-MIB::uioSensorStatusAlarmStatus'
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
              trigger_prototypes:
                -
                  expression: 'last(/APC UPS Symmetra RX SNMP/external.sensor.status[uioSensorStatusAlarmStatus.1.{#SNMPINDEX}])=3'
                  name: '{#EXTERNAL_SENSOR1_NAME}: Sensor has status Critical'
                  priority: HIGH
                  description: 'The external sensor has returned a value greater than the critical threshold.'
                -
                  expression: 'last(/APC UPS Symmetra RX SNMP/external.sensor.status[uioSensorStatusAlarmStatus.1.{#SNMPINDEX}])=4'
                  name: '{#EXTERNAL_SENSOR1_NAME}: Sensor has status Not Applicable'
                  priority: INFO
                  description: 'The external sensor does not work or is not connected.'
                -
                  expression: 'last(/APC UPS Symmetra RX SNMP/external.sensor.status[uioSensorStatusAlarmStatus.1.{#SNMPINDEX}])=2'
                  name: '{#EXTERNAL_SENSOR1_NAME}: Sensor has status Warning'
                  priority: AVERAGE
                  description: 'The external sensor has returned a value greater than the warning threshold.'
            -
              name: '{#EXTERNAL_SENSOR1_NAME}: Temperature sensor'
              type: SNMP_AGENT
              snmp_oid: 1.3.6.1.4.1.318.1.1.25.1.2.1.6.1.1
              key: 'external.sensor.temperature[uioSensorStatusTemperatureDegC.1.{#SNMPINDEX}]'
              history: 7d
              value_type: FLOAT
              units: ℃
              description: |
                MIB: PowerNet-MIB
                The sensor's current temperature reading in Celsius.
                 -1 indicates an invalid reading due to lost communications.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
          overrides:
            -
              name: Temp
              step: '1'
              filter:
                conditions:
                  -
                    macro: '{#EXTERNAL_SENSOR1_NAME}'
                    value: Temp
                    formulaid: A
              operations:
                -
                  operationobject: ITEM_PROTOTYPE
                  operator: LIKE
                  value: Humidity
                  status: ENABLED
                  discover: NO_DISCOVER
        -
          name: 'External sensor port 2 discovery'
          type: SNMP_AGENT
          snmp_oid: 'discovery[{#EXTERNAL_SENSOR2_NAME},1.3.6.1.4.1.318.1.1.25.1.2.2.3]'
          key: external.sensor2.discovery
          delay: 1h
          description: uioSensorStatusTable
          item_prototypes:
            -
              name: '{#EXTERNAL_SENSOR2_NAME}: Humidity sensor'
              type: SNMP_AGENT
              snmp_oid: 1.3.6.1.4.1.318.1.1.25.1.2.2.7.1.1
              key: 'external.sensor.humidity[uioSensorStatusHumidity.2.{#SNMPINDEX}]'
              history: 7d
              value_type: FLOAT
              units: '%'
              description: |
                MIB: PowerNet-MIB
                The sensor's current humidity reading - a relative humidity
                 percentage. -1 indicates an invalid reading due to either a
                 sensor that doesn't read humidity or lost communications.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
            -
              name: '{#EXTERNAL_SENSOR2_NAME}: Sensor alarm status'
              type: SNMP_AGENT
              snmp_oid: 1.3.6.1.4.1.318.1.1.25.1.2.2.9.1.1
              key: 'external.sensor.status[uioSensorStatusAlarmStatus.2.{#SNMPINDEX}]'
              history: 7d
              description: |
                MIB: PowerNet-MIB
                The alarm status of the sensor. Possible values:
                uioNormal                 (1),
                uioWarning                (2),
                uioCritical               (3),
                sensorStatusNotApplicable (4)
              valuemap:
                name: 'PowerNet-MIB::uioSensorStatusAlarmStatus'
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
              trigger_prototypes:
                -
                  expression: 'last(/APC UPS Symmetra RX SNMP/external.sensor.status[uioSensorStatusAlarmStatus.2.{#SNMPINDEX}])=3'
                  name: '{#EXTERNAL_SENSOR2_NAME}: Sensor has status Critical'
                  priority: HIGH
                  description: 'The external sensor has returned a value greater than the critical threshold.'
                -
                  expression: 'last(/APC UPS Symmetra RX SNMP/external.sensor.status[uioSensorStatusAlarmStatus.2.{#SNMPINDEX}])=4'
                  name: '{#EXTERNAL_SENSOR2_NAME}: Sensor has status Not Applicable'
                  priority: INFO
                  description: 'The external sensor does not work or is not connected.'
                -
                  expression: 'last(/APC UPS Symmetra RX SNMP/external.sensor.status[uioSensorStatusAlarmStatus.2.{#SNMPINDEX}])=2'
                  name: '{#EXTERNAL_SENSOR2_NAME}: Sensor has status Warning'
                  priority: AVERAGE
                  description: 'The external sensor has returned a value greater than the warning threshold.'
            -
              name: '{#EXTERNAL_SENSOR2_NAME}: Temperature sensor'
              type: SNMP_AGENT
              snmp_oid: 1.3.6.1.4.1.318.1.1.25.1.2.2.6.1.1
              key: 'external.sensor.temperature[uioSensorStatusTemperatureDegC.2.{#SNMPINDEX}]'
              history: 7d
              value_type: FLOAT
              units: ℃
              description: |
                MIB: PowerNet-MIB
                The sensor's current temperature reading in Celsius.
                 -1 indicates an invalid reading due to lost communications.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
          overrides:
            -
              name: Temp
              step: '1'
              filter:
                conditions:
                  -
                    macro: '{#EXTERNAL_SENSOR2_NAME}'
                    value: Temp
                    formulaid: A
              operations:
                -
                  operationobject: ITEM_PROTOTYPE
                  operator: LIKE
                  value: Humidity
                  status: ENABLED
                  discover: NO_DISCOVER
        -
          name: 'Input phases discovery'
          type: SNMP_AGENT
          snmp_oid: 'discovery[{#PHASEINDEX},1.3.6.1.4.1.318.1.1.1.9.2.3.1.2.1.1]'
          key: input.phases.discovery
          delay: 1h
          description: 'The input phase identifier. OID upsPhaseInputPhaseIndex.1.1'
          item_prototypes:
            -
              name: '{#PHASEINDEX}: Phase input current'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.9.2.3.1.6.1.1.{#PHASEINDEX}'
              key: 'phase.input.current[upsPhaseInputCurrent.1.1.{#PHASEINDEX}]'
              history: 7d
              value_type: FLOAT
              units: A
              description: |
                MIB: PowerNet-MIB
                The input current in 0.1 amperes, or -0.1 if it's
                 unsupported by this UPS.
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '0.1'
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
            -
              name: '{#PHASEINDEX}: Phase input voltage'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.9.2.3.1.3.1.1.{#PHASEINDEX}'
              key: 'phase.input.voltage[upsPhaseInputVoltage.1.1.{#PHASEINDEX}]'
              history: 7d
              value_type: FLOAT
              units: V
              description: |
                MIB: PowerNet-MIB
                The input voltage in VAC, or -1 if it's unsupported
                 by this UPS.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
              trigger_prototypes:
                -
                  expression: 'min(/APC UPS Symmetra RX SNMP/phase.input.voltage[upsPhaseInputVoltage.1.1.{#PHASEINDEX}],{$TIME.PERIOD}) > {$UPS.INPUT_VOLT.MAX.WARN} or max(/APC UPS Symmetra RX SNMP/phase.input.voltage[upsPhaseInputVoltage.1.1.{#PHASEINDEX}],{$TIME.PERIOD}) < {$UPS.INPUT_VOLT.MIN.WARN}'
                  name: '{#PHASEINDEX}: Unacceptable phase {#PHASEINDEX} input voltage (out of range {$UPS.INPUT_VOLT.MIN.WARN}-{$UPS.INPUT_VOLT.MAX.WARN}V for {$TIME.PERIOD})'
                  opdata: 'Current phase {#PHASEINDEX} voltage: {ITEM.LASTVALUE1}'
                  priority: HIGH
        -
          name: 'Output phases discovery'
          type: SNMP_AGENT
          snmp_oid: 'discovery[{#PHASEINDEX},1.3.6.1.4.1.318.1.1.1.9.3.3.1.2.1.1]'
          key: output.phases.discovery
          delay: 1h
          description: 'The output phase identifier. OID upsPhaseOutputPhaseIndex.1.1'
          item_prototypes:
            -
              name: '{#PHASEINDEX}: Phase output current'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.9.3.3.1.4.1.1.{#PHASEINDEX}'
              key: 'phase.output.current[upsPhaseOutputCurrent.1.1.{#PHASEINDEX}]'
              history: 7d
              value_type: FLOAT
              units: A
              description: |
                MIB: PowerNet-MIB
                The output current in 0.1 amperes drawn
                 by the load on the UPS, or -1 if it's unsupported
                 by this UPS.
              preprocessing:
                -
                  type: MULTIPLIER
                  parameters:
                    - '0.1'
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
            -
              name: '{#PHASEINDEX}: Phase output load, %'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.9.3.3.1.10.1.1.{#PHASEINDEX}'
              key: 'phase.output.load.percent[upsPhaseOutputPercentLoad.1.1.{#PHASEINDEX}]'
              history: 7d
              value_type: FLOAT
              units: '%'
              description: |
                MIB: PowerNet-MIB
                The percentage of the UPS load capacity in VA at
                 redundancy @ (n + x) presently being used on this
                 output phase, or -1 if it's unsupported by this UPS.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
            -
              name: '{#PHASEINDEX}: Phase output voltage'
              type: SNMP_AGENT
              snmp_oid: '1.3.6.1.4.1.318.1.1.1.9.3.3.1.3.1.1.{#PHASEINDEX}'
              key: 'phase.output.voltage[upsPhaseOutputVoltage.1.1.{#PHASEINDEX}]'
              history: 7d
              value_type: FLOAT
              units: V
              description: |
                MIB: PowerNet-MIB
                The output voltage in VAC, or -1 if it's unsupported
                 by this UPS.
              preprocessing:
                -
                  type: DISCARD_UNCHANGED_HEARTBEAT
                  parameters:
                    - 6h
              tags:
                -
                  tag: Status
              trigger_prototypes:
                -
                  expression: 'min(/APC UPS Symmetra RX SNMP/phase.output.voltage[upsPhaseOutputVoltage.1.1.{#PHASEINDEX}],{$TIME.PERIOD}) > {$UPS.INPUT_VOLT.MAX.WARN} or max(/APC UPS Symmetra RX SNMP/phase.output.voltage[upsPhaseOutputVoltage.1.1.{#PHASEINDEX}],{$TIME.PERIOD}) < {$UPS.INPUT_VOLT.MIN.WARN}'
                  name: '{#PHASEINDEX}: Unacceptable phase {#PHASEINDEX} output voltage (out of range {$UPS.INPUT_VOLT.MIN.WARN}-{$UPS.INPUT_VOLT.MAX.WARN}V for {$TIME.PERIOD})'
                  opdata: 'Current phase {#PHASEINDEX} voltage: {ITEM.LASTVALUE1}'
                  priority: HIGH
      macros:
        -
          macro: '{$BATTERY.CAPACITY.MIN.WARN}'
          value: '50'
          description: 'Minimum battery capacity percentage for trigger expression.'
        -
          macro: '{$BATTERY.TEMP.MAX.WARN}'
          value: '55'
          description: 'Maximum battery temperature for trigger expression.'
        -
          macro: '{$SNMP.TIMEOUT}'
          value: 5m
          description: 'The time interval for SNMP agent availability trigger expression.'
        -
          macro: '{$TIME.PERIOD}'
          value: 15m
          description: 'Time period for trigger expression.'
        -
          macro: '{$UPS.INPUT_FREQ.MAX.WARN}'
          value: '50.3'
          description: 'Maximum input frequency for trigger expression.'
        -
          macro: '{$UPS.INPUT_FREQ.MIN.WARN}'
          value: '49.7'
          description: 'Minimum input frequency for trigger expression.'
        -
          macro: '{$UPS.INPUT_VOLT.MAX.WARN}'
          value: '243'
          description: 'Maximum input voltage for trigger expression.'
        -
          macro: '{$UPS.INPUT_VOLT.MIN.WARN}'
          value: '197'
          description: 'Minimum input voltage for trigger expression.'
        -
          macro: '{$UPS.OUTPUT.MAX.WARN}'
          value: '80'
          description: 'Maximum output load in % for trigger expression.'
      valuemaps:
        -
          name: 'PowerNet-MIB::uioSensorStatusAlarmStatus'
          mappings:
            -
              value: '1'
              newvalue: Normal
            -
              value: '2'
              newvalue: Warning
            -
              value: '3'
              newvalue: Critical
            -
              value: '4'
              newvalue: 'Not applicable'
        -
          name: 'PowerNet-MIB::upsAdvBatteryReplaceIndicator'
          mappings:
            -
              value: '1'
              newvalue: 'no Battery Needs Replacing'
            -
              value: '2'
              newvalue: 'battery Needs Replacing'
        -
          name: 'PowerNet-MIB::upsAdvInputLineFailCause'
          mappings:
            -
              value: '1'
              newvalue: 'no Transfer'
            -
              value: '2'
              newvalue: 'High Line Voltage'
            -
              value: '3'
              newvalue: Brownout
            -
              value: '4'
              newvalue: Blackout
            -
              value: '5'
              newvalue: 'Small Momentary Sag'
            -
              value: '6'
              newvalue: 'Deep Momentary Sag'
            -
              value: '7'
              newvalue: 'Small Momentary Spike'
            -
              value: '8'
              newvalue: 'Large Momentary Spike'
            -
              value: '9'
              newvalue: 'Self Test'
            -
              value: '10'
              newvalue: 'Rate of Voltage Change'
        -
          name: 'PowerNet-MIB::upsBasicBatteryStatus'
          mappings:
            -
              value: '1'
              newvalue: Unknown
            -
              value: '2'
              newvalue: Normal
            -
              value: '3'
              newvalue: Low
            -
              value: '4'
              newvalue: 'In Fault Condition'
        -
          name: 'PowerNet-MIB::upsBasicOutputStatus'
          mappings:
            -
              value: '1'
              newvalue: Unknown
            -
              value: '2'
              newvalue: Online
            -
              value: '3'
              newvalue: 'On Battery'
            -
              value: '4'
              newvalue: 'On Smart Boost'
            -
              value: '5'
              newvalue: 'Timed Sleeping'
            -
              value: '6'
              newvalue: 'Software Bypass'
            -
              value: '7'
              newvalue: 'Off'
            -
              value: '8'
              newvalue: Rebooting
            -
              value: '9'
              newvalue: 'Switched Bypass'
            -
              value: '10'
              newvalue: 'Hardware Failure Bypass'
            -
              value: '11'
              newvalue: 'Sleeping Until Power Return'
            -
              value: '12'
              newvalue: 'On Smart Trim'
            -
              value: '13'
              newvalue: 'Eco Mode'
            -
              value: '14'
              newvalue: 'Hot Standby'
            -
              value: '15'
              newvalue: 'On Battery Test'
            -
              value: '16'
              newvalue: 'Emergency Static Bypass'
            -
              value: '17'
              newvalue: 'Static Bypass Standby'
            -
              value: '18'
              newvalue: 'Power Saving Mode'
            -
              value: '19'
              newvalue: 'Spot Mode'
            -
              value: '20'
              newvalue: E-Conversion
            -
              value: '21'
              newvalue: 'Charger Spotmode'
            -
              value: '22'
              newvalue: 'Inverter Spotmode'
            -
              value: '23'
              newvalue: 'Active Load'
            -
              value: '24'
              newvalue: 'Battery Discharge Spotmode'
            -
              value: '25'
              newvalue: 'Inverter Standby'
            -
              value: '26'
              newvalue: 'Charger Only'
        -
          name: zabbix.host.available
          mappings:
            -
              value: '0'
              newvalue: 'not available'
            -
              value: '1'
              newvalue: available
            -
              value: '2'
              newvalue: unknown
  graphs:
    -
      name: 'Capacity of the UPS batteries'
      type: PIE
      graph_items:
        -
          color: 1A7C11
          item:
            host: 'APC UPS Symmetra RX SNMP'
            key: 'battery.capacity[upsHighPrecBatteryCapacity]'
    -
      name: Output
      graph_items:
        -
          color: 1A7C11
          item:
            host: 'APC UPS Symmetra RX SNMP'
            key: 'output.current[upsHighPrecOutputCurrent]'
        -
          sortorder: '1'
          color: 2774A4
          item:
            host: 'APC UPS Symmetra RX SNMP'
            key: 'output.load[upsHighPrecOutputLoad]'
    -
      name: Voltage
      graph_items:
        -
          color: 1A7C11
          item:
            host: 'APC UPS Symmetra RX SNMP'
            key: 'input.voltage[upsHighPrecInputLineVoltage]'
        -
          sortorder: '1'
          color: 2774A4
          item:
            host: 'APC UPS Symmetra RX SNMP'
            key: 'output.voltage[upsHighPrecOutputVoltage]'