diff options
Diffstat (limited to 'vendor/golang.org/x/net/http2/server.go')
-rw-r--r-- | vendor/golang.org/x/net/http2/server.go | 2890 |
1 files changed, 0 insertions, 2890 deletions
diff --git a/vendor/golang.org/x/net/http2/server.go b/vendor/golang.org/x/net/http2/server.go deleted file mode 100644 index 174c89b7f..000000000 --- a/vendor/golang.org/x/net/http2/server.go +++ /dev/null @@ -1,2890 +0,0 @@ -// Copyright 2014 The Go Authors. All rights reserved. -// Use of this source code is governed by a BSD-style -// license that can be found in the LICENSE file. - -// TODO: turn off the serve goroutine when idle, so -// an idle conn only has the readFrames goroutine active. (which could -// also be optimized probably to pin less memory in crypto/tls). This -// would involve tracking when the serve goroutine is active (atomic -// int32 read/CAS probably?) and starting it up when frames arrive, -// and shutting it down when all handlers exit. the occasional PING -// packets could use time.AfterFunc to call sc.wakeStartServeLoop() -// (which is a no-op if already running) and then queue the PING write -// as normal. The serve loop would then exit in most cases (if no -// Handlers running) and not be woken up again until the PING packet -// returns. - -// TODO (maybe): add a mechanism for Handlers to going into -// half-closed-local mode (rw.(io.Closer) test?) but not exit their -// handler, and continue to be able to read from the -// Request.Body. This would be a somewhat semantic change from HTTP/1 -// (or at least what we expose in net/http), so I'd probably want to -// add it there too. For now, this package says that returning from -// the Handler ServeHTTP function means you're both done reading and -// done writing, without a way to stop just one or the other. - -package http2 - -import ( - "bufio" - "bytes" - "crypto/tls" - "errors" - "fmt" - "io" - "log" - "math" - "net" - "net/http" - "net/textproto" - "net/url" - "os" - "reflect" - "runtime" - "strconv" - "strings" - "sync" - "time" - - "golang.org/x/net/http/httpguts" - "golang.org/x/net/http2/hpack" -) - -const ( - prefaceTimeout = 10 * time.Second - firstSettingsTimeout = 2 * time.Second // should be in-flight with preface anyway - handlerChunkWriteSize = 4 << 10 - defaultMaxStreams = 250 // TODO: make this 100 as the GFE seems to? -) - -var ( - errClientDisconnected = errors.New("client disconnected") - errClosedBody = errors.New("body closed by handler") - errHandlerComplete = errors.New("http2: request body closed due to handler exiting") - errStreamClosed = errors.New("http2: stream closed") -) - -var responseWriterStatePool = sync.Pool{ - New: func() interface{} { - rws := &responseWriterState{} - rws.bw = bufio.NewWriterSize(chunkWriter{rws}, handlerChunkWriteSize) - return rws - }, -} - -// Test hooks. -var ( - testHookOnConn func() - testHookGetServerConn func(*serverConn) - testHookOnPanicMu *sync.Mutex // nil except in tests - testHookOnPanic func(sc *serverConn, panicVal interface{}) (rePanic bool) -) - -// Server is an HTTP/2 server. -type Server struct { - // MaxHandlers limits the number of http.Handler ServeHTTP goroutines - // which may run at a time over all connections. - // Negative or zero no limit. - // TODO: implement - MaxHandlers int - - // MaxConcurrentStreams optionally specifies the number of - // concurrent streams that each client may have open at a - // time. This is unrelated to the number of http.Handler goroutines - // which may be active globally, which is MaxHandlers. - // If zero, MaxConcurrentStreams defaults to at least 100, per - // the HTTP/2 spec's recommendations. - MaxConcurrentStreams uint32 - - // MaxReadFrameSize optionally specifies the largest frame - // this server is willing to read. A valid value is between - // 16k and 16M, inclusive. If zero or otherwise invalid, a - // default value is used. - MaxReadFrameSize uint32 - - // PermitProhibitedCipherSuites, if true, permits the use of - // cipher suites prohibited by the HTTP/2 spec. - PermitProhibitedCipherSuites bool - - // IdleTimeout specifies how long until idle clients should be - // closed with a GOAWAY frame. PING frames are not considered - // activity for the purposes of IdleTimeout. - IdleTimeout time.Duration - - // MaxUploadBufferPerConnection is the size of the initial flow - // control window for each connections. The HTTP/2 spec does not - // allow this to be smaller than 65535 or larger than 2^32-1. - // If the value is outside this range, a default value will be - // used instead. - MaxUploadBufferPerConnection int32 - - // MaxUploadBufferPerStream is the size of the initial flow control - // window for each stream. The HTTP/2 spec does not allow this to - // be larger than 2^32-1. If the value is zero or larger than the - // maximum, a default value will be used instead. - MaxUploadBufferPerStream int32 - - // NewWriteScheduler constructs a write scheduler for a connection. - // If nil, a default scheduler is chosen. - NewWriteScheduler func() WriteScheduler - - // Internal state. This is a pointer (rather than embedded directly) - // so that we don't embed a Mutex in this struct, which will make the - // struct non-copyable, which might break some callers. - state *serverInternalState -} - -func (s *Server) initialConnRecvWindowSize() int32 { - if s.MaxUploadBufferPerConnection > initialWindowSize { - return s.MaxUploadBufferPerConnection - } - return 1 << 20 -} - -func (s *Server) initialStreamRecvWindowSize() int32 { - if s.MaxUploadBufferPerStream > 0 { - return s.MaxUploadBufferPerStream - } - return 1 << 20 -} - -func (s *Server) maxReadFrameSize() uint32 { - if v := s.MaxReadFrameSize; v >= minMaxFrameSize && v <= maxFrameSize { - return v - } - return defaultMaxReadFrameSize -} - -func (s *Server) maxConcurrentStreams() uint32 { - if v := s.MaxConcurrentStreams; v > 0 { - return v - } - return defaultMaxStreams -} - -type serverInternalState struct { - mu sync.Mutex - activeConns map[*serverConn]struct{} -} - -func (s *serverInternalState) registerConn(sc *serverConn) { - if s == nil { - return // if the Server was used without calling ConfigureServer - } - s.mu.Lock() - s.activeConns[sc] = struct{}{} - s.mu.Unlock() -} - -func (s *serverInternalState) unregisterConn(sc *serverConn) { - if s == nil { - return // if the Server was used without calling ConfigureServer - } - s.mu.Lock() - delete(s.activeConns, sc) - s.mu.Unlock() -} - -func (s *serverInternalState) startGracefulShutdown() { - if s == nil { - return // if the Server was used without calling ConfigureServer - } - s.mu.Lock() - for sc := range s.activeConns { - sc.startGracefulShutdown() - } - s.mu.Unlock() -} - -// ConfigureServer adds HTTP/2 support to a net/http Server. -// -// The configuration conf may be nil. -// -// ConfigureServer must be called before s begins serving. -func ConfigureServer(s *http.Server, conf *Server) error { - if s == nil { - panic("nil *http.Server") - } - if conf == nil { - conf = new(Server) - } - conf.state = &serverInternalState{activeConns: make(map[*serverConn]struct{})} - if err := configureServer18(s, conf); err != nil { - return err - } - if err := configureServer19(s, conf); err != nil { - return err - } - - if s.TLSConfig == nil { - s.TLSConfig = new(tls.Config) - } else if s.TLSConfig.CipherSuites != nil { - // If they already provided a CipherSuite list, return - // an error if it has a bad order or is missing - // ECDHE_RSA_WITH_AES_128_GCM_SHA256 or ECDHE_ECDSA_WITH_AES_128_GCM_SHA256. - haveRequired := false - sawBad := false - for i, cs := range s.TLSConfig.CipherSuites { - switch cs { - case tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, - // Alternative MTI cipher to not discourage ECDSA-only servers. - // See http://golang.org/cl/30721 for further information. - tls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256: - haveRequired = true - } - if isBadCipher(cs) { - sawBad = true - } else if sawBad { - return fmt.Errorf("http2: TLSConfig.CipherSuites index %d contains an HTTP/2-approved cipher suite (%#04x), but it comes after unapproved cipher suites. With this configuration, clients that don't support previous, approved cipher suites may be given an unapproved one and reject the connection.", i, cs) - } - } - if !haveRequired { - return fmt.Errorf("http2: TLSConfig.CipherSuites is missing an HTTP/2-required AES_128_GCM_SHA256 cipher.") - } - } - - // Note: not setting MinVersion to tls.VersionTLS12, - // as we don't want to interfere with HTTP/1.1 traffic - // on the user's server. We enforce TLS 1.2 later once - // we accept a connection. Ideally this should be done - // during next-proto selection, but using TLS <1.2 with - // HTTP/2 is still the client's bug. - - s.TLSConfig.PreferServerCipherSuites = true - - haveNPN := false - for _, p := range s.TLSConfig.NextProtos { - if p == NextProtoTLS { - haveNPN = true - break - } - } - if !haveNPN { - s.TLSConfig.NextProtos = append(s.TLSConfig.NextProtos, NextProtoTLS) - } - - if s.TLSNextProto == nil { - s.TLSNextProto = map[string]func(*http.Server, *tls.Conn, http.Handler){} - } - protoHandler := func(hs *http.Server, c *tls.Conn, h http.Handler) { - if testHookOnConn != nil { - testHookOnConn() - } - conf.ServeConn(c, &ServeConnOpts{ - Handler: h, - BaseConfig: hs, - }) - } - s.TLSNextProto[NextProtoTLS] = protoHandler - return nil -} - -// ServeConnOpts are options for the Server.ServeConn method. -type ServeConnOpts struct { - // BaseConfig optionally sets the base configuration - // for values. If nil, defaults are used. - BaseConfig *http.Server - - // Handler specifies which handler to use for processing - // requests. If nil, BaseConfig.Handler is used. If BaseConfig - // or BaseConfig.Handler is nil, http.DefaultServeMux is used. - Handler http.Handler -} - -func (o *ServeConnOpts) baseConfig() *http.Server { - if o != nil && o.BaseConfig != nil { - return o.BaseConfig - } - return new(http.Server) -} - -func (o *ServeConnOpts) handler() http.Handler { - if o != nil { - if o.Handler != nil { - return o.Handler - } - if o.BaseConfig != nil && o.BaseConfig.Handler != nil { - return o.BaseConfig.Handler - } - } - return http.DefaultServeMux -} - -// ServeConn serves HTTP/2 requests on the provided connection and -// blocks until the connection is no longer readable. -// -// ServeConn starts speaking HTTP/2 assuming that c has not had any -// reads or writes. It writes its initial settings frame and expects -// to be able to read the preface and settings frame from the -// client. If c has a ConnectionState method like a *tls.Conn, the -// ConnectionState is used to verify the TLS ciphersuite and to set -// the Request.TLS field in Handlers. -// -// ServeConn does not support h2c by itself. Any h2c support must be -// implemented in terms of providing a suitably-behaving net.Conn. -// -// The opts parameter is optional. If nil, default values are used. -func (s *Server) ServeConn(c net.Conn, opts *ServeConnOpts) { - baseCtx, cancel := serverConnBaseContext(c, opts) - defer cancel() - - sc := &serverConn{ - srv: s, - hs: opts.baseConfig(), - conn: c, - baseCtx: baseCtx, - remoteAddrStr: c.RemoteAddr().String(), - bw: newBufferedWriter(c), - handler: opts.handler(), - streams: make(map[uint32]*stream), - readFrameCh: make(chan readFrameResult), - wantWriteFrameCh: make(chan FrameWriteRequest, 8), - serveMsgCh: make(chan interface{}, 8), - wroteFrameCh: make(chan frameWriteResult, 1), // buffered; one send in writeFrameAsync - bodyReadCh: make(chan bodyReadMsg), // buffering doesn't matter either way - doneServing: make(chan struct{}), - clientMaxStreams: math.MaxUint32, // Section 6.5.2: "Initially, there is no limit to this value" - advMaxStreams: s.maxConcurrentStreams(), - initialStreamSendWindowSize: initialWindowSize, - maxFrameSize: initialMaxFrameSize, - headerTableSize: initialHeaderTableSize, - serveG: newGoroutineLock(), - pushEnabled: true, - } - - s.state.registerConn(sc) - defer s.state.unregisterConn(sc) - - // The net/http package sets the write deadline from the - // http.Server.WriteTimeout during the TLS handshake, but then - // passes the connection off to us with the deadline already set. - // Write deadlines are set per stream in serverConn.newStream. - // Disarm the net.Conn write deadline here. - if sc.hs.WriteTimeout != 0 { - sc.conn.SetWriteDeadline(time.Time{}) - } - - if s.NewWriteScheduler != nil { - sc.writeSched = s.NewWriteScheduler() - } else { - sc.writeSched = NewRandomWriteScheduler() - } - - // These start at the RFC-specified defaults. If there is a higher - // configured value for inflow, that will be updated when we send a - // WINDOW_UPDATE shortly after sending SETTINGS. - sc.flow.add(initialWindowSize) - sc.inflow.add(initialWindowSize) - sc.hpackEncoder = hpack.NewEncoder(&sc.headerWriteBuf) - - fr := NewFramer(sc.bw, c) - fr.ReadMetaHeaders = hpack.NewDecoder(initialHeaderTableSize, nil) - fr.MaxHeaderListSize = sc.maxHeaderListSize() - fr.SetMaxReadFrameSize(s.maxReadFrameSize()) - sc.framer = fr - - if tc, ok := c.(connectionStater); ok { - sc.tlsState = new(tls.ConnectionState) - *sc.tlsState = tc.ConnectionState() - // 9.2 Use of TLS Features - // An implementation of HTTP/2 over TLS MUST use TLS - // 1.2 or higher with the restrictions on feature set - // and cipher suite described in this section. Due to - // implementation limitations, it might not be - // possible to fail TLS negotiation. An endpoint MUST - // immediately terminate an HTTP/2 connection that - // does not meet the TLS requirements described in - // this section with a connection error (Section - // 5.4.1) of type INADEQUATE_SECURITY. - if sc.tlsState.Version < tls.VersionTLS12 { - sc.rejectConn(ErrCodeInadequateSecurity, "TLS version too low") - return - } - - if sc.tlsState.ServerName == "" { - // Client must use SNI, but we don't enforce that anymore, - // since it was causing problems when connecting to bare IP - // addresses during development. - // - // TODO: optionally enforce? Or enforce at the time we receive - // a new request, and verify the ServerName matches the :authority? - // But that precludes proxy situations, perhaps. - // - // So for now, do nothing here again. - } - - if !s.PermitProhibitedCipherSuites && isBadCipher(sc.tlsState.CipherSuite) { - // "Endpoints MAY choose to generate a connection error - // (Section 5.4.1) of type INADEQUATE_SECURITY if one of - // the prohibited cipher suites are negotiated." - // - // We choose that. In my opinion, the spec is weak - // here. It also says both parties must support at least - // TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 so there's no - // excuses here. If we really must, we could allow an - // "AllowInsecureWeakCiphers" option on the server later. - // Let's see how it plays out first. - sc.rejectConn(ErrCodeInadequateSecurity, fmt.Sprintf("Prohibited TLS 1.2 Cipher Suite: %x", sc.tlsState.CipherSuite)) - return - } - } - - if hook := testHookGetServerConn; hook != nil { - hook(sc) - } - sc.serve() -} - -func (sc *serverConn) rejectConn(err ErrCode, debug string) { - sc.vlogf("http2: server rejecting conn: %v, %s", err, debug) - // ignoring errors. hanging up anyway. - sc.framer.WriteGoAway(0, err, []byte(debug)) - sc.bw.Flush() - sc.conn.Close() -} - -type serverConn struct { - // Immutable: - srv *Server - hs *http.Server - conn net.Conn - bw *bufferedWriter // writing to conn - handler http.Handler - baseCtx contextContext - framer *Framer - doneServing chan struct{} // closed when serverConn.serve ends - readFrameCh chan readFrameResult // written by serverConn.readFrames - wantWriteFrameCh chan FrameWriteRequest // from handlers -> serve - wroteFrameCh chan frameWriteResult // from writeFrameAsync -> serve, tickles more frame writes - bodyReadCh chan bodyReadMsg // from handlers -> serve - serveMsgCh chan interface{} // misc messages & code to send to / run on the serve loop - flow flow // conn-wide (not stream-specific) outbound flow control - inflow flow // conn-wide inbound flow control - tlsState *tls.ConnectionState // shared by all handlers, like net/http - remoteAddrStr string - writeSched WriteScheduler - - // Everything following is owned by the serve loop; use serveG.check(): - serveG goroutineLock // used to verify funcs are on serve() - pushEnabled bool - sawFirstSettings bool // got the initial SETTINGS frame after the preface - needToSendSettingsAck bool - unackedSettings int // how many SETTINGS have we sent without ACKs? - clientMaxStreams uint32 // SETTINGS_MAX_CONCURRENT_STREAMS from client (our PUSH_PROMISE limit) - advMaxStreams uint32 // our SETTINGS_MAX_CONCURRENT_STREAMS advertised the client - curClientStreams uint32 // number of open streams initiated by the client - curPushedStreams uint32 // number of open streams initiated by server push - maxClientStreamID uint32 // max ever seen from client (odd), or 0 if there have been no client requests - maxPushPromiseID uint32 // ID of the last push promise (even), or 0 if there have been no pushes - streams map[uint32]*stream - initialStreamSendWindowSize int32 - maxFrameSize int32 - headerTableSize uint32 - peerMaxHeaderListSize uint32 // zero means unknown (default) - canonHeader map[string]string // http2-lower-case -> Go-Canonical-Case - writingFrame bool // started writing a frame (on serve goroutine or separate) - writingFrameAsync bool // started a frame on its own goroutine but haven't heard back on wroteFrameCh - needsFrameFlush bool // last frame write wasn't a flush - inGoAway bool // we've started to or sent GOAWAY - inFrameScheduleLoop bool // whether we're in the scheduleFrameWrite loop - needToSendGoAway bool // we need to schedule a GOAWAY frame write - goAwayCode ErrCode - shutdownTimer *time.Timer // nil until used - idleTimer *time.Timer // nil if unused - - // Owned by the writeFrameAsync goroutine: - headerWriteBuf bytes.Buffer - hpackEncoder *hpack.Encoder - - // Used by startGracefulShutdown. - shutdownOnce sync.Once -} - -func (sc *serverConn) maxHeaderListSize() uint32 { - n := sc.hs.MaxHeaderBytes - if n <= 0 { - n = http.DefaultMaxHeaderBytes - } - // http2's count is in a slightly different unit and includes 32 bytes per pair. - // So, take the net/http.Server value and pad it up a bit, assuming 10 headers. - const perFieldOverhead = 32 // per http2 spec - const typicalHeaders = 10 // conservative - return uint32(n + typicalHeaders*perFieldOverhead) -} - -func (sc *serverConn) curOpenStreams() uint32 { - sc.serveG.check() - return sc.curClientStreams + sc.curPushedStreams -} - -// stream represents a stream. This is the minimal metadata needed by -// the serve goroutine. Most of the actual stream state is owned by -// the http.Handler's goroutine in the responseWriter. Because the -// responseWriter's responseWriterState is recycled at the end of a -// handler, this struct intentionally has no pointer to the -// *responseWriter{,State} itself, as the Handler ending nils out the -// responseWriter's state field. -type stream struct { - // immutable: - sc *serverConn - id uint32 - body *pipe // non-nil if expecting DATA frames - cw closeWaiter // closed wait stream transitions to closed state - ctx contextContext - cancelCtx func() - - // owned by serverConn's serve loop: - bodyBytes int64 // body bytes seen so far - declBodyBytes int64 // or -1 if undeclared - flow flow // limits writing from Handler to client - inflow flow // what the client is allowed to POST/etc to us - parent *stream // or nil - numTrailerValues int64 - weight uint8 - state streamState - resetQueued bool // RST_STREAM queued for write; set by sc.resetStream - gotTrailerHeader bool // HEADER frame for trailers was seen - wroteHeaders bool // whether we wrote headers (not status 100) - writeDeadline *time.Timer // nil if unused - - trailer http.Header // accumulated trailers - reqTrailer http.Header // handler's Request.Trailer -} - -func (sc *serverConn) Framer() *Framer { return sc.framer } -func (sc *serverConn) CloseConn() error { return sc.conn.Close() } -func (sc *serverConn) Flush() error { return sc.bw.Flush() } -func (sc *serverConn) HeaderEncoder() (*hpack.Encoder, *bytes.Buffer) { - return sc.hpackEncoder, &sc.headerWriteBuf -} - -func (sc *serverConn) state(streamID uint32) (streamState, *stream) { - sc.serveG.check() - // http://tools.ietf.org/html/rfc7540#section-5.1 - if st, ok := sc.streams[streamID]; ok { - return st.state, st - } - // "The first use of a new stream identifier implicitly closes all - // streams in the "idle" state that might have been initiated by - // that peer with a lower-valued stream identifier. For example, if - // a client sends a HEADERS frame on stream 7 without ever sending a - // frame on stream 5, then stream 5 transitions to the "closed" - // state when the first frame for stream 7 is sent or received." - if streamID%2 == 1 { - if streamID <= sc.maxClientStreamID { - return stateClosed, nil - } - } else { - if streamID <= sc.maxPushPromiseID { - return stateClosed, nil - } - } - return stateIdle, nil -} - -// setConnState calls the net/http ConnState hook for this connection, if configured. -// Note that the net/http package does StateNew and StateClosed for us. -// There is currently no plan for StateHijacked or hijacking HTTP/2 connections. -func (sc *serverConn) setConnState(state http.ConnState) { - if sc.hs.ConnState != nil { - sc.hs.ConnState(sc.conn, state) - } -} - -func (sc *serverConn) vlogf(format string, args ...interface{}) { - if VerboseLogs { - sc.logf(format, args...) - } -} - -func (sc *serverConn) logf(format string, args ...interface{}) { - if lg := sc.hs.ErrorLog; lg != nil { - lg.Printf(format, args...) - } else { - log.Printf(format, args...) - } -} - -// errno returns v's underlying uintptr, else 0. -// -// TODO: remove this helper function once http2 can use build -// tags. See comment in isClosedConnError. -func errno(v error) uintptr { - if rv := reflect.ValueOf(v); rv.Kind() == reflect.Uintptr { - return uintptr(rv.Uint()) - } - return 0 -} - -// isClosedConnError reports whether err is an error from use of a closed -// network connection. -func isClosedConnError(err error) bool { - if err == nil { - return false - } - - // TODO: remove this string search and be more like the Windows - // case below. That might involve modifying the standard library - // to return better error types. - str := err.Error() - if strings.Contains(str, "use of closed network connection") { - return true - } - - // TODO(bradfitz): x/tools/cmd/bundle doesn't really support - // build tags, so I can't make an http2_windows.go file with - // Windows-specific stuff. Fix that and move this, once we - // have a way to bundle this into std's net/http somehow. - if runtime.GOOS == "windows" { - if oe, ok := err.(*net.OpError); ok && oe.Op == "read" { - if se, ok := oe.Err.(*os.SyscallError); ok && se.Syscall == "wsarecv" { - const WSAECONNABORTED = 10053 - const WSAECONNRESET = 10054 - if n := errno(se.Err); n == WSAECONNRESET || n == WSAECONNABORTED { - return true - } - } - } - } - return false -} - -func (sc *serverConn) condlogf(err error, format string, args ...interface{}) { - if err == nil { - return - } - if err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err) || err == errPrefaceTimeout { - // Boring, expected errors. - sc.vlogf(format, args...) - } else { - sc.logf(format, args...) - } -} - -func (sc *serverConn) canonicalHeader(v string) string { - sc.serveG.check() - buildCommonHeaderMapsOnce() - cv, ok := commonCanonHeader[v] - if ok { - return cv - } - cv, ok = sc.canonHeader[v] - if ok { - return cv - } - if sc.canonHeader == nil { - sc.canonHeader = make(map[string]string) - } - cv = http.CanonicalHeaderKey(v) - sc.canonHeader[v] = cv - return cv -} - -type readFrameResult struct { - f Frame // valid until readMore is called - err error - - // readMore should be called once the consumer no longer needs or - // retains f. After readMore, f is invalid and more frames can be - // read. - readMore func() -} - -// readFrames is the loop that reads incoming frames. -// It takes care to only read one frame at a time, blocking until the -// consumer is done with the frame. -// It's run on its own goroutine. -func (sc *serverConn) readFrames() { - gate := make(gate) - gateDone := gate.Done - for { - f, err := sc.framer.ReadFrame() - select { - case sc.readFrameCh <- readFrameResult{f, err, gateDone}: - case <-sc.doneServing: - return - } - select { - case <-gate: - case <-sc.doneServing: - return - } - if terminalReadFrameError(err) { - return - } - } -} - -// frameWriteResult is the message passed from writeFrameAsync to the serve goroutine. -type frameWriteResult struct { - wr FrameWriteRequest // what was written (or attempted) - err error // result of the writeFrame call -} - -// writeFrameAsync runs in its own goroutine and writes a single frame -// and then reports when it's done. -// At most one goroutine can be running writeFrameAsync at a time per -// serverConn. -func (sc *serverConn) writeFrameAsync(wr FrameWriteRequest) { - err := wr.write.writeFrame(sc) - sc.wroteFrameCh <- frameWriteResult{wr, err} -} - -func (sc *serverConn) closeAllStreamsOnConnClose() { - sc.serveG.check() - for _, st := range sc.streams { - sc.closeStream(st, errClientDisconnected) - } -} - -func (sc *serverConn) stopShutdownTimer() { - sc.serveG.check() - if t := sc.shutdownTimer; t != nil { - t.Stop() - } -} - -func (sc *serverConn) notePanic() { - // Note: this is for serverConn.serve panicking, not http.Handler code. - if testHookOnPanicMu != nil { - testHookOnPanicMu.Lock() - defer testHookOnPanicMu.Unlock() - } - if testHookOnPanic != nil { - if e := recover(); e != nil { - if testHookOnPanic(sc, e) { - panic(e) - } - } - } -} - -func (sc *serverConn) serve() { - sc.serveG.check() - defer sc.notePanic() - defer sc.conn.Close() - defer sc.closeAllStreamsOnConnClose() - defer sc.stopShutdownTimer() - defer close(sc.doneServing) // unblocks handlers trying to send - - if VerboseLogs { - sc.vlogf("http2: server connection from %v on %p", sc.conn.RemoteAddr(), sc.hs) - } - - sc.writeFrame(FrameWriteRequest{ - write: writeSettings{ - {SettingMaxFrameSize, sc.srv.maxReadFrameSize()}, - {SettingMaxConcurrentStreams, sc.advMaxStreams}, - {SettingMaxHeaderListSize, sc.maxHeaderListSize()}, - {SettingInitialWindowSize, uint32(sc.srv.initialStreamRecvWindowSize())}, - }, - }) - sc.unackedSettings++ - - // Each connection starts with intialWindowSize inflow tokens. - // If a higher value is configured, we add more tokens. - if diff := sc.srv.initialConnRecvWindowSize() - initialWindowSize; diff > 0 { - sc.sendWindowUpdate(nil, int(diff)) - } - - if err := sc.readPreface(); err != nil { - sc.condlogf(err, "http2: server: error reading preface from client %v: %v", sc.conn.RemoteAddr(), err) - return - } - // Now that we've got the preface, get us out of the - // "StateNew" state. We can't go directly to idle, though. - // Active means we read some data and anticipate a request. We'll - // do another Active when we get a HEADERS frame. - sc.setConnState(http.StateActive) - sc.setConnState(http.StateIdle) - - if sc.srv.IdleTimeout != 0 { - sc.idleTimer = time.AfterFunc(sc.srv.IdleTimeout, sc.onIdleTimer) - defer sc.idleTimer.Stop() - } - - go sc.readFrames() // closed by defer sc.conn.Close above - - settingsTimer := time.AfterFunc(firstSettingsTimeout, sc.onSettingsTimer) - defer settingsTimer.Stop() - - loopNum := 0 - for { - loopNum++ - select { - case wr := <-sc.wantWriteFrameCh: - if se, ok := wr.write.(StreamError); ok { - sc.resetStream(se) - break - } - sc.writeFrame(wr) - case res := <-sc.wroteFrameCh: - sc.wroteFrame(res) - case res := <-sc.readFrameCh: - if !sc.processFrameFromReader(res) { - return - } - res.readMore() - if settingsTimer != nil { - settingsTimer.Stop() - settingsTimer = nil - } - case m := <-sc.bodyReadCh: - sc.noteBodyRead(m.st, m.n) - case msg := <-sc.serveMsgCh: - switch v := msg.(type) { - case func(int): - v(loopNum) // for testing - case *serverMessage: - switch v { - case settingsTimerMsg: - sc.logf("timeout waiting for SETTINGS frames from %v", sc.conn.RemoteAddr()) - return - case idleTimerMsg: - sc.vlogf("connection is idle") - sc.goAway(ErrCodeNo) - case shutdownTimerMsg: - sc.vlogf("GOAWAY close timer fired; closing conn from %v", sc.conn.RemoteAddr()) - return - case gracefulShutdownMsg: - sc.startGracefulShutdownInternal() - default: - panic("unknown timer") - } - case *startPushRequest: - sc.startPush(v) - default: - panic(fmt.Sprintf("unexpected type %T", v)) - } - } - - // Start the shutdown timer after sending a GOAWAY. When sending GOAWAY - // with no error code (graceful shutdown), don't start the timer until - // all open streams have been completed. - sentGoAway := sc.inGoAway && !sc.needToSendGoAway && !sc.writingFrame - gracefulShutdownComplete := sc.goAwayCode == ErrCodeNo && sc.curOpenStreams() == 0 - if sentGoAway && sc.shutdownTimer == nil && (sc.goAwayCode != ErrCodeNo || gracefulShutdownComplete) { - sc.shutDownIn(goAwayTimeout) - } - } -} - -func (sc *serverConn) awaitGracefulShutdown(sharedCh <-chan struct{}, privateCh chan struct{}) { - select { - case <-sc.doneServing: - case <-sharedCh: - close(privateCh) - } -} - -type serverMessage int - -// Message values sent to serveMsgCh. -var ( - settingsTimerMsg = new(serverMessage) - idleTimerMsg = new(serverMessage) - shutdownTimerMsg = new(serverMessage) - gracefulShutdownMsg = new(serverMessage) -) - -func (sc *serverConn) onSettingsTimer() { sc.sendServeMsg(settingsTimerMsg) } -func (sc *serverConn) onIdleTimer() { sc.sendServeMsg(idleTimerMsg) } -func (sc *serverConn) onShutdownTimer() { sc.sendServeMsg(shutdownTimerMsg) } - -func (sc *serverConn) sendServeMsg(msg interface{}) { - sc.serveG.checkNotOn() // NOT - select { - case sc.serveMsgCh <- msg: - case <-sc.doneServing: - } -} - -var errPrefaceTimeout = errors.New("timeout waiting for client preface") - -// readPreface reads the ClientPreface greeting from the peer or -// returns errPrefaceTimeout on timeout, or an error if the greeting -// is invalid. -func (sc *serverConn) readPreface() error { - errc := make(chan error, 1) - go func() { - // Read the client preface - buf := make([]byte, len(ClientPreface)) - if _, err := io.ReadFull(sc.conn, buf); err != nil { - errc <- err - } else if !bytes.Equal(buf, clientPreface) { - errc <- fmt.Errorf("bogus greeting %q", buf) - } else { - errc <- nil - } - }() - timer := time.NewTimer(prefaceTimeout) // TODO: configurable on *Server? - defer timer.Stop() - select { - case <-timer.C: - return errPrefaceTimeout - case err := <-errc: - if err == nil { - if VerboseLogs { - sc.vlogf("http2: server: client %v said hello", sc.conn.RemoteAddr()) - } - } - return err - } -} - -var errChanPool = sync.Pool{ - New: func() interface{} { return make(chan error, 1) }, -} - -var writeDataPool = sync.Pool{ - New: func() interface{} { return new(writeData) }, -} - -// writeDataFromHandler writes DATA response frames from a handler on -// the given stream. -func (sc *serverConn) writeDataFromHandler(stream *stream, data []byte, endStream bool) error { - ch := errChanPool.Get().(chan error) - writeArg := writeDataPool.Get().(*writeData) - *writeArg = writeData{stream.id, data, endStream} - err := sc.writeFrameFromHandler(FrameWriteRequest{ - write: writeArg, - stream: stream, - done: ch, - }) - if err != nil { - return err - } - var frameWriteDone bool // the frame write is done (successfully or not) - select { - case err = <-ch: - frameWriteDone = true - case <-sc.doneServing: - return errClientDisconnected - case <-stream.cw: - // If both ch and stream.cw were ready (as might - // happen on the final Write after an http.Handler - // ends), prefer the write result. Otherwise this - // might just be us successfully closing the stream. - // The writeFrameAsync and serve goroutines guarantee - // that the ch send will happen before the stream.cw - // close. - select { - case err = <-ch: - frameWriteDone = true - default: - return errStreamClosed - } - } - errChanPool.Put(ch) - if frameWriteDone { - writeDataPool.Put(writeArg) - } - return err -} - -// writeFrameFromHandler sends wr to sc.wantWriteFrameCh, but aborts -// if the connection has gone away. -// -// This must not be run from the serve goroutine itself, else it might -// deadlock writing to sc.wantWriteFrameCh (which is only mildly -// buffered and is read by serve itself). If you're on the serve -// goroutine, call writeFrame instead. -func (sc *serverConn) writeFrameFromHandler(wr FrameWriteRequest) error { - sc.serveG.checkNotOn() // NOT - select { - case sc.wantWriteFrameCh <- wr: - return nil - case <-sc.doneServing: - // Serve loop is gone. - // Client has closed their connection to the server. - return errClientDisconnected - } -} - -// writeFrame schedules a frame to write and sends it if there's nothing -// already being written. -// -// There is no pushback here (the serve goroutine never blocks). It's -// the http.Handlers that block, waiting for their previous frames to -// make it onto the wire -// -// If you're not on the serve goroutine, use writeFrameFromHandler instead. -func (sc *serverConn) writeFrame(wr FrameWriteRequest) { - sc.serveG.check() - - // If true, wr will not be written and wr.done will not be signaled. - var ignoreWrite bool - - // We are not allowed to write frames on closed streams. RFC 7540 Section - // 5.1.1 says: "An endpoint MUST NOT send frames other than PRIORITY on - // a closed stream." Our server never sends PRIORITY, so that exception - // does not apply. - // - // The serverConn might close an open stream while the stream's handler - // is still running. For example, the server might close a stream when it - // receives bad data from the client. If this happens, the handler might - // attempt to write a frame after the stream has been closed (since the - // handler hasn't yet been notified of the close). In this case, we simply - // ignore the frame. The handler will notice that the stream is closed when - // it waits for the frame to be written. - // - // As an exception to this rule, we allow sending RST_STREAM after close. - // This allows us to immediately reject new streams without tracking any - // state for those streams (except for the queued RST_STREAM frame). This - // may result in duplicate RST_STREAMs in some cases, but the client should - // ignore those. - if wr.StreamID() != 0 { - _, isReset := wr.write.(StreamError) - if state, _ := sc.state(wr.StreamID()); state == stateClosed && !isReset { - ignoreWrite = true - } - } - - // Don't send a 100-continue response if we've already sent headers. - // See golang.org/issue/14030. - switch wr.write.(type) { - case *writeResHeaders: - wr.stream.wroteHeaders = true - case write100ContinueHeadersFrame: - if wr.stream.wroteHeaders { - // We do not need to notify wr.done because this frame is - // never written with wr.done != nil. - if wr.done != nil { - panic("wr.done != nil for write100ContinueHeadersFrame") - } - ignoreWrite = true - } - } - - if !ignoreWrite { - sc.writeSched.Push(wr) - } - sc.scheduleFrameWrite() -} - -// startFrameWrite starts a goroutine to write wr (in a separate -// goroutine since that might block on the network), and updates the -// serve goroutine's state about the world, updated from info in wr. -func (sc *serverConn) startFrameWrite(wr FrameWriteRequest) { - sc.serveG.check() - if sc.writingFrame { - panic("internal error: can only be writing one frame at a time") - } - - st := wr.stream - if st != nil { - switch st.state { - case stateHalfClosedLocal: - switch wr.write.(type) { - case StreamError, handlerPanicRST, writeWindowUpdate: - // RFC 7540 Section 5.1 allows sending RST_STREAM, PRIORITY, and WINDOW_UPDATE - // in this state. (We never send PRIORITY from the server, so that is not checked.) - default: - panic(fmt.Sprintf("internal error: attempt to send frame on a half-closed-local stream: %v", wr)) - } - case stateClosed: - panic(fmt.Sprintf("internal error: attempt to send frame on a closed stream: %v", wr)) - } - } - if wpp, ok := wr.write.(*writePushPromise); ok { - var err error - wpp.promisedID, err = wpp.allocatePromisedID() - if err != nil { - sc.writingFrameAsync = false - wr.replyToWriter(err) - return - } - } - - sc.writingFrame = true - sc.needsFrameFlush = true - if wr.write.staysWithinBuffer(sc.bw.Available()) { - sc.writingFrameAsync = false - err := wr.write.writeFrame(sc) - sc.wroteFrame(frameWriteResult{wr, err}) - } else { - sc.writingFrameAsync = true - go sc.writeFrameAsync(wr) - } -} - -// errHandlerPanicked is the error given to any callers blocked in a read from -// Request.Body when the main goroutine panics. Since most handlers read in the -// main ServeHTTP goroutine, this will show up rarely. -var errHandlerPanicked = errors.New("http2: handler panicked") - -// wroteFrame is called on the serve goroutine with the result of -// whatever happened on writeFrameAsync. -func (sc *serverConn) wroteFrame(res frameWriteResult) { - sc.serveG.check() - if !sc.writingFrame { - panic("internal error: expected to be already writing a frame") - } - sc.writingFrame = false - sc.writingFrameAsync = false - - wr := res.wr - - if writeEndsStream(wr.write) { - st := wr.stream - if st == nil { - panic("internal error: expecting non-nil stream") - } - switch st.state { - case stateOpen: - // Here we would go to stateHalfClosedLocal in - // theory, but since our handler is done and - // the net/http package provides no mechanism - // for closing a ResponseWriter while still - // reading data (see possible TODO at top of - // this file), we go into closed state here - // anyway, after telling the peer we're - // hanging up on them. We'll transition to - // stateClosed after the RST_STREAM frame is - // written. - st.state = stateHalfClosedLocal - // Section 8.1: a server MAY request that the client abort - // transmission of a request without error by sending a - // RST_STREAM with an error code of NO_ERROR after sending - // a complete response. - sc.resetStream(streamError(st.id, ErrCodeNo)) - case stateHalfClosedRemote: - sc.closeStream(st, errHandlerComplete) - } - } else { - switch v := wr.write.(type) { - case StreamError: - // st may be unknown if the RST_STREAM was generated to reject bad input. - if st, ok := sc.streams[v.StreamID]; ok { - sc.closeStream(st, v) - } - case handlerPanicRST: - sc.closeStream(wr.stream, errHandlerPanicked) - } - } - - // Reply (if requested) to unblock the ServeHTTP goroutine. - wr.replyToWriter(res.err) - - sc.scheduleFrameWrite() -} - -// scheduleFrameWrite tickles the frame writing scheduler. -// -// If a frame is already being written, nothing happens. This will be called again -// when the frame is done being written. -// -// If a frame isn't being written we need to send one, the best frame -// to send is selected, preferring first things that aren't -// stream-specific (e.g. ACKing settings), and then finding the -// highest priority stream. -// -// If a frame isn't being written and there's nothing else to send, we -// flush the write buffer. -func (sc *serverConn) scheduleFrameWrite() { - sc.serveG.check() - if sc.writingFrame || sc.inFrameScheduleLoop { - return - } - sc.inFrameScheduleLoop = true - for !sc.writingFrameAsync { - if sc.needToSendGoAway { - sc.needToSendGoAway = false - sc.startFrameWrite(FrameWriteRequest{ - write: &writeGoAway{ - maxStreamID: sc.maxClientStreamID, - code: sc.goAwayCode, - }, - }) - continue - } - if sc.needToSendSettingsAck { - sc.needToSendSettingsAck = false - sc.startFrameWrite(FrameWriteRequest{write: writeSettingsAck{}}) - continue - } - if !sc.inGoAway || sc.goAwayCode == ErrCodeNo { - if wr, ok := sc.writeSched.Pop(); ok { - sc.startFrameWrite(wr) - continue - } - } - if sc.needsFrameFlush { - sc.startFrameWrite(FrameWriteRequest{write: flushFrameWriter{}}) - sc.needsFrameFlush = false // after startFrameWrite, since it sets this true - continue - } - break - } - sc.inFrameScheduleLoop = false -} - -// startGracefulShutdown gracefully shuts down a connection. This -// sends GOAWAY with ErrCodeNo to tell the client we're gracefully -// shutting down. The connection isn't closed until all current -// streams are done. -// -// startGracefulShutdown returns immediately; it does not wait until -// the connection has shut down. -func (sc *serverConn) startGracefulShutdown() { - sc.serveG.checkNotOn() // NOT - sc.shutdownOnce.Do(func() { sc.sendServeMsg(gracefulShutdownMsg) }) -} - -// After sending GOAWAY, the connection will close after goAwayTimeout. -// If we close the connection immediately after sending GOAWAY, there may -// be unsent data in our kernel receive buffer, which will cause the kernel -// to send a TCP RST on close() instead of a FIN. This RST will abort the -// connection immediately, whether or not the client had received the GOAWAY. -// -// Ideally we should delay for at least 1 RTT + epsilon so the client has -// a chance to read the GOAWAY and stop sending messages. Measuring RTT -// is hard, so we approximate with 1 second. See golang.org/issue/18701. -// -// This is a var so it can be shorter in tests, where all requests uses the -// loopback interface making the expected RTT very small. -// -// TODO: configurable? -var goAwayTimeout = 1 * time.Second - -func (sc *serverConn) startGracefulShutdownInternal() { - sc.goAway(ErrCodeNo) -} - -func (sc *serverConn) goAway(code ErrCode) { - sc.serveG.check() - if sc.inGoAway { - return - } - sc.inGoAway = true - sc.needToSendGoAway = true - sc.goAwayCode = code - sc.scheduleFrameWrite() -} - -func (sc *serverConn) shutDownIn(d time.Duration) { - sc.serveG.check() - sc.shutdownTimer = time.AfterFunc(d, sc.onShutdownTimer) -} - -func (sc *serverConn) resetStream(se StreamError) { - sc.serveG.check() - sc.writeFrame(FrameWriteRequest{write: se}) - if st, ok := sc.streams[se.StreamID]; ok { - st.resetQueued = true - } -} - -// processFrameFromReader processes the serve loop's read from readFrameCh from the -// frame-reading goroutine. -// processFrameFromReader returns whether the connection should be kept open. -func (sc *serverConn) processFrameFromReader(res readFrameResult) bool { - sc.serveG.check() - err := res.err - if err != nil { - if err == ErrFrameTooLarge { - sc.goAway(ErrCodeFrameSize) - return true // goAway will close the loop - } - clientGone := err == io.EOF || err == io.ErrUnexpectedEOF || isClosedConnError(err) - if clientGone { - // TODO: could we also get into this state if - // the peer does a half close - // (e.g. CloseWrite) because they're done - // sending frames but they're still wanting - // our open replies? Investigate. - // TODO: add CloseWrite to crypto/tls.Conn first - // so we have a way to test this? I suppose - // just for testing we could have a non-TLS mode. - return false - } - } else { - f := res.f - if VerboseLogs { - sc.vlogf("http2: server read frame %v", summarizeFrame(f)) - } - err = sc.processFrame(f) - if err == nil { - return true - } - } - - switch ev := err.(type) { - case StreamError: - sc.resetStream(ev) - return true - case goAwayFlowError: - sc.goAway(ErrCodeFlowControl) - return true - case ConnectionError: - sc.logf("http2: server connection error from %v: %v", sc.conn.RemoteAddr(), ev) - sc.goAway(ErrCode(ev)) - return true // goAway will handle shutdown - default: - if res.err != nil { - sc.vlogf("http2: server closing client connection; error reading frame from client %s: %v", sc.conn.RemoteAddr(), err) - } else { - sc.logf("http2: server closing client connection: %v", err) - } - return false - } -} - -func (sc *serverConn) processFrame(f Frame) error { - sc.serveG.check() - - // First frame received must be SETTINGS. - if !sc.sawFirstSettings { - if _, ok := f.(*SettingsFrame); !ok { - return ConnectionError(ErrCodeProtocol) - } - sc.sawFirstSettings = true - } - - switch f := f.(type) { - case *SettingsFrame: - return sc.processSettings(f) - case *MetaHeadersFrame: - return sc.processHeaders(f) - case *WindowUpdateFrame: - return sc.processWindowUpdate(f) - case *PingFrame: - return sc.processPing(f) - case *DataFrame: - return sc.processData(f) - case *RSTStreamFrame: - return sc.processResetStream(f) - case *PriorityFrame: - return sc.processPriority(f) - case *GoAwayFrame: - return sc.processGoAway(f) - case *PushPromiseFrame: - // A client cannot push. Thus, servers MUST treat the receipt of a PUSH_PROMISE - // frame as a connection error (Section 5.4.1) of type PROTOCOL_ERROR. - return ConnectionError(ErrCodeProtocol) - default: - sc.vlogf("http2: server ignoring frame: %v", f.Header()) - return nil - } -} - -func (sc *serverConn) processPing(f *PingFrame) error { - sc.serveG.check() - if f.IsAck() { - // 6.7 PING: " An endpoint MUST NOT respond to PING frames - // containing this flag." - return nil - } - if f.StreamID != 0 { - // "PING frames are not associated with any individual - // stream. If a PING frame is received with a stream - // identifier field value other than 0x0, the recipient MUST - // respond with a connection error (Section 5.4.1) of type - // PROTOCOL_ERROR." - return ConnectionError(ErrCodeProtocol) - } - if sc.inGoAway && sc.goAwayCode != ErrCodeNo { - return nil - } - sc.writeFrame(FrameWriteRequest{write: writePingAck{f}}) - return nil -} - -func (sc *serverConn) processWindowUpdate(f *WindowUpdateFrame) error { - sc.serveG.check() - switch { - case f.StreamID != 0: // stream-level flow control - state, st := sc.state(f.StreamID) - if state == stateIdle { - // Section 5.1: "Receiving any frame other than HEADERS - // or PRIORITY on a stream in this state MUST be - // treated as a connection error (Section 5.4.1) of - // type PROTOCOL_ERROR." - return ConnectionError(ErrCodeProtocol) - } - if st == nil { - // "WINDOW_UPDATE can be sent by a peer that has sent a - // frame bearing the END_STREAM flag. This means that a - // receiver could receive a WINDOW_UPDATE frame on a "half - // closed (remote)" or "closed" stream. A receiver MUST - // NOT treat this as an error, see Section 5.1." - return nil - } - if !st.flow.add(int32(f.Increment)) { - return streamError(f.StreamID, ErrCodeFlowControl) - } - default: // connection-level flow control - if !sc.flow.add(int32(f.Increment)) { - return goAwayFlowError{} - } - } - sc.scheduleFrameWrite() - return nil -} - -func (sc *serverConn) processResetStream(f *RSTStreamFrame) error { - sc.serveG.check() - - state, st := sc.state(f.StreamID) - if state == stateIdle { - // 6.4 "RST_STREAM frames MUST NOT be sent for a - // stream in the "idle" state. If a RST_STREAM frame - // identifying an idle stream is received, the - // recipient MUST treat this as a connection error - // (Section 5.4.1) of type PROTOCOL_ERROR. - return ConnectionError(ErrCodeProtocol) - } - if st != nil { - st.cancelCtx() - sc.closeStream(st, streamError(f.StreamID, f.ErrCode)) - } - return nil -} - -func (sc *serverConn) closeStream(st *stream, err error) { - sc.serveG.check() - if st.state == stateIdle || st.state == stateClosed { - panic(fmt.Sprintf("invariant; can't close stream in state %v", st.state)) - } - st.state = stateClosed - if st.writeDeadline != nil { - st.writeDeadline.Stop() - } - if st.isPushed() { - sc.curPushedStreams-- - } else { - sc.curClientStreams-- - } - delete(sc.streams, st.id) - if len(sc.streams) == 0 { - sc.setConnState(http.StateIdle) - if sc.srv.IdleTimeout != 0 { - sc.idleTimer.Reset(sc.srv.IdleTimeout) - } - if h1ServerKeepAlivesDisabled(sc.hs) { - sc.startGracefulShutdownInternal() - } - } - if p := st.body; p != nil { - // Return any buffered unread bytes worth of conn-level flow control. - // See golang.org/issue/16481 - sc.sendWindowUpdate(nil, p.Len()) - - p.CloseWithError(err) - } - st.cw.Close() // signals Handler's CloseNotifier, unblocks writes, etc - sc.writeSched.CloseStream(st.id) -} - -func (sc *serverConn) processSettings(f *SettingsFrame) error { - sc.serveG.check() - if f.IsAck() { - sc.unackedSettings-- - if sc.unackedSettings < 0 { - // Why is the peer ACKing settings we never sent? - // The spec doesn't mention this case, but - // hang up on them anyway. - return ConnectionError(ErrCodeProtocol) - } - return nil - } - if f.NumSettings() > 100 || f.HasDuplicates() { - // This isn't actually in the spec, but hang up on - // suspiciously large settings frames or those with - // duplicate entries. - return ConnectionError(ErrCodeProtocol) - } - if err := f.ForeachSetting(sc.processSetting); err != nil { - return err - } - sc.needToSendSettingsAck = true - sc.scheduleFrameWrite() - return nil -} - -func (sc *serverConn) processSetting(s Setting) error { - sc.serveG.check() - if err := s.Valid(); err != nil { - return err - } - if VerboseLogs { - sc.vlogf("http2: server processing setting %v", s) - } - switch s.ID { - case SettingHeaderTableSize: - sc.headerTableSize = s.Val - sc.hpackEncoder.SetMaxDynamicTableSize(s.Val) - case SettingEnablePush: - sc.pushEnabled = s.Val != 0 - case SettingMaxConcurrentStreams: - sc.clientMaxStreams = s.Val - case SettingInitialWindowSize: - return sc.processSettingInitialWindowSize(s.Val) - case SettingMaxFrameSize: - sc.maxFrameSize = int32(s.Val) // the maximum valid s.Val is < 2^31 - case SettingMaxHeaderListSize: - sc.peerMaxHeaderListSize = s.Val - default: - // Unknown setting: "An endpoint that receives a SETTINGS - // frame with any unknown or unsupported identifier MUST - // ignore that setting." - if VerboseLogs { - sc.vlogf("http2: server ignoring unknown setting %v", s) - } - } - return nil -} - -func (sc *serverConn) processSettingInitialWindowSize(val uint32) error { - sc.serveG.check() - // Note: val already validated to be within range by - // processSetting's Valid call. - - // "A SETTINGS frame can alter the initial flow control window - // size for all current streams. When the value of - // SETTINGS_INITIAL_WINDOW_SIZE changes, a receiver MUST - // adjust the size of all stream flow control windows that it - // maintains by the difference between the new value and the - // old value." - old := sc.initialStreamSendWindowSize - sc.initialStreamSendWindowSize = int32(val) - growth := int32(val) - old // may be negative - for _, st := range sc.streams { - if !st.flow.add(growth) { - // 6.9.2 Initial Flow Control Window Size - // "An endpoint MUST treat a change to - // SETTINGS_INITIAL_WINDOW_SIZE that causes any flow - // control window to exceed the maximum size as a - // connection error (Section 5.4.1) of type - // FLOW_CONTROL_ERROR." - return ConnectionError(ErrCodeFlowControl) - } - } - return nil -} - -func (sc *serverConn) processData(f *DataFrame) error { - sc.serveG.check() - if sc.inGoAway && sc.goAwayCode != ErrCodeNo { - return nil - } - data := f.Data() - - // "If a DATA frame is received whose stream is not in "open" - // or "half closed (local)" state, the recipient MUST respond - // with a stream error (Section 5.4.2) of type STREAM_CLOSED." - id := f.Header().StreamID - state, st := sc.state(id) - if id == 0 || state == stateIdle { - // Section 5.1: "Receiving any frame other than HEADERS - // or PRIORITY on a stream in this state MUST be - // treated as a connection error (Section 5.4.1) of - // type PROTOCOL_ERROR." - return ConnectionError(ErrCodeProtocol) - } - // RFC 7540, sec 6.1: If a DATA frame is received whose stream is not in - // "open" or "half-closed (local)" state, the recipient MUST respond with a - // stream error (Section 5.4.2) of type STREAM_CLOSED. - if state == stateClosed { - return streamError(id, ErrCodeStreamClosed) - } - if st == nil || state != stateOpen || st.gotTrailerHeader || st.resetQueued { - // This includes sending a RST_STREAM if the stream is - // in stateHalfClosedLocal (which currently means that - // the http.Handler returned, so it's done reading & - // done writing). Try to stop the client from sending - // more DATA. - - // But still enforce their connection-level flow control, - // and return any flow control bytes since we're not going - // to consume them. - if sc.inflow.available() < int32(f.Length) { - return streamError(id, ErrCodeFlowControl) - } - // Deduct the flow control from inflow, since we're - // going to immediately add it back in - // sendWindowUpdate, which also schedules sending the - // frames. - sc.inflow.take(int32(f.Length)) - sc.sendWindowUpdate(nil, int(f.Length)) // conn-level - - if st != nil && st.resetQueued { - // Already have a stream error in flight. Don't send another. - return nil - } - return streamError(id, ErrCodeStreamClosed) - } - if st.body == nil { - panic("internal error: should have a body in this state") - } - - // Sender sending more than they'd declared? - if st.declBodyBytes != -1 && st.bodyBytes+int64(len(data)) > st.declBodyBytes { - st.body.CloseWithError(fmt.Errorf("sender tried to send more than declared Content-Length of %d bytes", st.declBodyBytes)) - // RFC 7540, sec 8.1.2.6: A request or response is also malformed if the - // value of a content-length header field does not equal the sum of the - // DATA frame payload lengths that form the body. - return streamError(id, ErrCodeProtocol) - } - if f.Length > 0 { - // Check whether the client has flow control quota. - if st.inflow.available() < int32(f.Length) { - return streamError(id, ErrCodeFlowControl) - } - st.inflow.take(int32(f.Length)) - - if len(data) > 0 { - wrote, err := st.body.Write(data) - if err != nil { - return streamError(id, ErrCodeStreamClosed) - } - if wrote != len(data) { - panic("internal error: bad Writer") - } - st.bodyBytes += int64(len(data)) - } - - // Return any padded flow control now, since we won't - // refund it later on body reads. - if pad := int32(f.Length) - int32(len(data)); pad > 0 { - sc.sendWindowUpdate32(nil, pad) - sc.sendWindowUpdate32(st, pad) - } - } - if f.StreamEnded() { - st.endStream() - } - return nil -} - -func (sc *serverConn) processGoAway(f *GoAwayFrame) error { - sc.serveG.check() - if f.ErrCode != ErrCodeNo { - sc.logf("http2: received GOAWAY %+v, starting graceful shutdown", f) - } else { - sc.vlogf("http2: received GOAWAY %+v, starting graceful shutdown", f) - } - sc.startGracefulShutdownInternal() - // http://tools.ietf.org/html/rfc7540#section-6.8 - // We should not create any new streams, which means we should disable push. - sc.pushEnabled = false - return nil -} - -// isPushed reports whether the stream is server-initiated. -func (st *stream) isPushed() bool { - return st.id%2 == 0 -} - -// endStream closes a Request.Body's pipe. It is called when a DATA -// frame says a request body is over (or after trailers). -func (st *stream) endStream() { - sc := st.sc - sc.serveG.check() - - if st.declBodyBytes != -1 && st.declBodyBytes != st.bodyBytes { - st.body.CloseWithError(fmt.Errorf("request declared a Content-Length of %d but only wrote %d bytes", - st.declBodyBytes, st.bodyBytes)) - } else { - st.body.closeWithErrorAndCode(io.EOF, st.copyTrailersToHandlerRequest) - st.body.CloseWithError(io.EOF) - } - st.state = stateHalfClosedRemote -} - -// copyTrailersToHandlerRequest is run in the Handler's goroutine in -// its Request.Body.Read just before it gets io.EOF. -func (st *stream) copyTrailersToHandlerRequest() { - for k, vv := range st.trailer { - if _, ok := st.reqTrailer[k]; ok { - // Only copy it over it was pre-declared. - st.reqTrailer[k] = vv - } - } -} - -// onWriteTimeout is run on its own goroutine (from time.AfterFunc) -// when the stream's WriteTimeout has fired. -func (st *stream) onWriteTimeout() { - st.sc.writeFrameFromHandler(FrameWriteRequest{write: streamError(st.id, ErrCodeInternal)}) -} - -func (sc *serverConn) processHeaders(f *MetaHeadersFrame) error { - sc.serveG.check() - id := f.StreamID - if sc.inGoAway { - // Ignore. - return nil - } - // http://tools.ietf.org/html/rfc7540#section-5.1.1 - // Streams initiated by a client MUST use odd-numbered stream - // identifiers. [...] An endpoint that receives an unexpected - // stream identifier MUST respond with a connection error - // (Section 5.4.1) of type PROTOCOL_ERROR. - if id%2 != 1 { - return ConnectionError(ErrCodeProtocol) - } - // A HEADERS frame can be used to create a new stream or - // send a trailer for an open one. If we already have a stream - // open, let it process its own HEADERS frame (trailers at this - // point, if it's valid). - if st := sc.streams[f.StreamID]; st != nil { - if st.resetQueued { - // We're sending RST_STREAM to close the stream, so don't bother - // processing this frame. - return nil - } - // RFC 7540, sec 5.1: If an endpoint receives additional frames, other than - // WINDOW_UPDATE, PRIORITY, or RST_STREAM, for a stream that is in - // this state, it MUST respond with a stream error (Section 5.4.2) of - // type STREAM_CLOSED. - if st.state == stateHalfClosedRemote { - return streamError(id, ErrCodeStreamClosed) - } - return st.processTrailerHeaders(f) - } - - // [...] The identifier of a newly established stream MUST be - // numerically greater than all streams that the initiating - // endpoint has opened or reserved. [...] An endpoint that - // receives an unexpected stream identifier MUST respond with - // a connection error (Section 5.4.1) of type PROTOCOL_ERROR. - if id <= sc.maxClientStreamID { - return ConnectionError(ErrCodeProtocol) - } - sc.maxClientStreamID = id - - if sc.idleTimer != nil { - sc.idleTimer.Stop() - } - - // http://tools.ietf.org/html/rfc7540#section-5.1.2 - // [...] Endpoints MUST NOT exceed the limit set by their peer. An - // endpoint that receives a HEADERS frame that causes their - // advertised concurrent stream limit to be exceeded MUST treat - // this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR - // or REFUSED_STREAM. - if sc.curClientStreams+1 > sc.advMaxStreams { - if sc.unackedSettings == 0 { - // They should know better. - return streamError(id, ErrCodeProtocol) - } - // Assume it's a network race, where they just haven't - // received our last SETTINGS update. But actually - // this can't happen yet, because we don't yet provide - // a way for users to adjust server parameters at - // runtime. - return streamError(id, ErrCodeRefusedStream) - } - - initialState := stateOpen - if f.StreamEnded() { - initialState = stateHalfClosedRemote - } - st := sc.newStream(id, 0, initialState) - - if f.HasPriority() { - if err := checkPriority(f.StreamID, f.Priority); err != nil { - return err - } - sc.writeSched.AdjustStream(st.id, f.Priority) - } - - rw, req, err := sc.newWriterAndRequest(st, f) - if err != nil { - return err - } - st.reqTrailer = req.Trailer - if st.reqTrailer != nil { - st.trailer = make(http.Header) - } - st.body = req.Body.(*requestBody).pipe // may be nil - st.declBodyBytes = req.ContentLength - - handler := sc.handler.ServeHTTP - if f.Truncated { - // Their header list was too long. Send a 431 error. - handler = handleHeaderListTooLong - } else if err := checkValidHTTP2RequestHeaders(req.Header); err != nil { - handler = new400Handler(err) - } - - // The net/http package sets the read deadline from the - // http.Server.ReadTimeout during the TLS handshake, but then - // passes the connection off to us with the deadline already - // set. Disarm it here after the request headers are read, - // similar to how the http1 server works. Here it's - // technically more like the http1 Server's ReadHeaderTimeout - // (in Go 1.8), though. That's a more sane option anyway. - if sc.hs.ReadTimeout != 0 { - sc.conn.SetReadDeadline(time.Time{}) - } - - go sc.runHandler(rw, req, handler) - return nil -} - -func (st *stream) processTrailerHeaders(f *MetaHeadersFrame) error { - sc := st.sc - sc.serveG.check() - if st.gotTrailerHeader { - return ConnectionError(ErrCodeProtocol) - } - st.gotTrailerHeader = true - if !f.StreamEnded() { - return streamError(st.id, ErrCodeProtocol) - } - - if len(f.PseudoFields()) > 0 { - return streamError(st.id, ErrCodeProtocol) - } - if st.trailer != nil { - for _, hf := range f.RegularFields() { - key := sc.canonicalHeader(hf.Name) - if !httpguts.ValidTrailerHeader(key) { - // TODO: send more details to the peer somehow. But http2 has - // no way to send debug data at a stream level. Discuss with - // HTTP folk. - return streamError(st.id, ErrCodeProtocol) - } - st.trailer[key] = append(st.trailer[key], hf.Value) - } - } - st.endStream() - return nil -} - -func checkPriority(streamID uint32, p PriorityParam) error { - if streamID == p.StreamDep { - // Section 5.3.1: "A stream cannot depend on itself. An endpoint MUST treat - // this as a stream error (Section 5.4.2) of type PROTOCOL_ERROR." - // Section 5.3.3 says that a stream can depend on one of its dependencies, - // so it's only self-dependencies that are forbidden. - return streamError(streamID, ErrCodeProtocol) - } - return nil -} - -func (sc *serverConn) processPriority(f *PriorityFrame) error { - if sc.inGoAway { - return nil - } - if err := checkPriority(f.StreamID, f.PriorityParam); err != nil { - return err - } - sc.writeSched.AdjustStream(f.StreamID, f.PriorityParam) - return nil -} - -func (sc *serverConn) newStream(id, pusherID uint32, state streamState) *stream { - sc.serveG.check() - if id == 0 { - panic("internal error: cannot create stream with id 0") - } - - ctx, cancelCtx := contextWithCancel(sc.baseCtx) - st := &stream{ - sc: sc, - id: id, - state: state, - ctx: ctx, - cancelCtx: cancelCtx, - } - st.cw.Init() - st.flow.conn = &sc.flow // link to conn-level counter - st.flow.add(sc.initialStreamSendWindowSize) - st.inflow.conn = &sc.inflow // link to conn-level counter - st.inflow.add(sc.srv.initialStreamRecvWindowSize()) - if sc.hs.WriteTimeout != 0 { - st.writeDeadline = time.AfterFunc(sc.hs.WriteTimeout, st.onWriteTimeout) - } - - sc.streams[id] = st - sc.writeSched.OpenStream(st.id, OpenStreamOptions{PusherID: pusherID}) - if st.isPushed() { - sc.curPushedStreams++ - } else { - sc.curClientStreams++ - } - if sc.curOpenStreams() == 1 { - sc.setConnState(http.StateActive) - } - - return st -} - -func (sc *serverConn) newWriterAndRequest(st *stream, f *MetaHeadersFrame) (*responseWriter, *http.Request, error) { - sc.serveG.check() - - rp := requestParam{ - method: f.PseudoValue("method"), - scheme: f.PseudoValue("scheme"), - authority: f.PseudoValue("authority"), - path: f.PseudoValue("path"), - } - - isConnect := rp.method == "CONNECT" - if isConnect { - if rp.path != "" || rp.scheme != "" || rp.authority == "" { - return nil, nil, streamError(f.StreamID, ErrCodeProtocol) - } - } else if rp.method == "" || rp.path == "" || (rp.scheme != "https" && rp.scheme != "http") { - // See 8.1.2.6 Malformed Requests and Responses: - // - // Malformed requests or responses that are detected - // MUST be treated as a stream error (Section 5.4.2) - // of type PROTOCOL_ERROR." - // - // 8.1.2.3 Request Pseudo-Header Fields - // "All HTTP/2 requests MUST include exactly one valid - // value for the :method, :scheme, and :path - // pseudo-header fields" - return nil, nil, streamError(f.StreamID, ErrCodeProtocol) - } - - bodyOpen := !f.StreamEnded() - if rp.method == "HEAD" && bodyOpen { - // HEAD requests can't have bodies - return nil, nil, streamError(f.StreamID, ErrCodeProtocol) - } - - rp.header = make(http.Header) - for _, hf := range f.RegularFields() { - rp.header.Add(sc.canonicalHeader(hf.Name), hf.Value) - } - if rp.authority == "" { - rp.authority = rp.header.Get("Host") - } - - rw, req, err := sc.newWriterAndRequestNoBody(st, rp) - if err != nil { - return nil, nil, err - } - if bodyOpen { - if vv, ok := rp.header["Content-Length"]; ok { - req.ContentLength, _ = strconv.ParseInt(vv[0], 10, 64) - } else { - req.ContentLength = -1 - } - req.Body.(*requestBody).pipe = &pipe{ - b: &dataBuffer{expected: req.ContentLength}, - } - } - return rw, req, nil -} - -type requestParam struct { - method string - scheme, authority, path string - header http.Header -} - -func (sc *serverConn) newWriterAndRequestNoBody(st *stream, rp requestParam) (*responseWriter, *http.Request, error) { - sc.serveG.check() - - var tlsState *tls.ConnectionState // nil if not scheme https - if rp.scheme == "https" { - tlsState = sc.tlsState - } - - needsContinue := rp.header.Get("Expect") == "100-continue" - if needsContinue { - rp.header.Del("Expect") - } - // Merge Cookie headers into one "; "-delimited value. - if cookies := rp.header["Cookie"]; len(cookies) > 1 { - rp.header.Set("Cookie", strings.Join(cookies, "; ")) - } - - // Setup Trailers - var trailer http.Header - for _, v := range rp.header["Trailer"] { - for _, key := range strings.Split(v, ",") { - key = http.CanonicalHeaderKey(strings.TrimSpace(key)) - switch key { - case "Transfer-Encoding", "Trailer", "Content-Length": - // Bogus. (copy of http1 rules) - // Ignore. - default: - if trailer == nil { - trailer = make(http.Header) - } - trailer[key] = nil - } - } - } - delete(rp.header, "Trailer") - - var url_ *url.URL - var requestURI string - if rp.method == "CONNECT" { - url_ = &url.URL{Host: rp.authority} - requestURI = rp.authority // mimic HTTP/1 server behavior - } else { - var err error - url_, err = url.ParseRequestURI(rp.path) - if err != nil { - return nil, nil, streamError(st.id, ErrCodeProtocol) - } - requestURI = rp.path - } - - body := &requestBody{ - conn: sc, - stream: st, - needsContinue: needsContinue, - } - req := &http.Request{ - Method: rp.method, - URL: url_, - RemoteAddr: sc.remoteAddrStr, - Header: rp.header, - RequestURI: requestURI, - Proto: "HTTP/2.0", - ProtoMajor: 2, - ProtoMinor: 0, - TLS: tlsState, - Host: rp.authority, - Body: body, - Trailer: trailer, - } - req = requestWithContext(req, st.ctx) - - rws := responseWriterStatePool.Get().(*responseWriterState) - bwSave := rws.bw - *rws = responseWriterState{} // zero all the fields - rws.conn = sc - rws.bw = bwSave - rws.bw.Reset(chunkWriter{rws}) - rws.stream = st - rws.req = req - rws.body = body - - rw := &responseWriter{rws: rws} - return rw, req, nil -} - -// Run on its own goroutine. -func (sc *serverConn) runHandler(rw *responseWriter, req *http.Request, handler func(http.ResponseWriter, *http.Request)) { - didPanic := true - defer func() { - rw.rws.stream.cancelCtx() - if didPanic { - e := recover() - sc.writeFrameFromHandler(FrameWriteRequest{ - write: handlerPanicRST{rw.rws.stream.id}, - stream: rw.rws.stream, - }) - // Same as net/http: - if shouldLogPanic(e) { - const size = 64 << 10 - buf := make([]byte, size) - buf = buf[:runtime.Stack(buf, false)] - sc.logf("http2: panic serving %v: %v\n%s", sc.conn.RemoteAddr(), e, buf) - } - return - } - rw.handlerDone() - }() - handler(rw, req) - didPanic = false -} - -func handleHeaderListTooLong(w http.ResponseWriter, r *http.Request) { - // 10.5.1 Limits on Header Block Size: - // .. "A server that receives a larger header block than it is - // willing to handle can send an HTTP 431 (Request Header Fields Too - // Large) status code" - const statusRequestHeaderFieldsTooLarge = 431 // only in Go 1.6+ - w.WriteHeader(statusRequestHeaderFieldsTooLarge) - io.WriteString(w, "<h1>HTTP Error 431</h1><p>Request Header Field(s) Too Large</p>") -} - -// called from handler goroutines. -// h may be nil. -func (sc *serverConn) writeHeaders(st *stream, headerData *writeResHeaders) error { - sc.serveG.checkNotOn() // NOT on - var errc chan error - if headerData.h != nil { - // If there's a header map (which we don't own), so we have to block on - // waiting for this frame to be written, so an http.Flush mid-handler - // writes out the correct value of keys, before a handler later potentially - // mutates it. - errc = errChanPool.Get().(chan error) - } - if err := sc.writeFrameFromHandler(FrameWriteRequest{ - write: headerData, - stream: st, - done: errc, - }); err != nil { - return err - } - if errc != nil { - select { - case err := <-errc: - errChanPool.Put(errc) - return err - case <-sc.doneServing: - return errClientDisconnected - case <-st.cw: - return errStreamClosed - } - } - return nil -} - -// called from handler goroutines. -func (sc *serverConn) write100ContinueHeaders(st *stream) { - sc.writeFrameFromHandler(FrameWriteRequest{ - write: write100ContinueHeadersFrame{st.id}, - stream: st, - }) -} - -// A bodyReadMsg tells the server loop that the http.Handler read n -// bytes of the DATA from the client on the given stream. -type bodyReadMsg struct { - st *stream - n int -} - -// called from handler goroutines. -// Notes that the handler for the given stream ID read n bytes of its body -// and schedules flow control tokens to be sent. -func (sc *serverConn) noteBodyReadFromHandler(st *stream, n int, err error) { - sc.serveG.checkNotOn() // NOT on - if n > 0 { - select { - case sc.bodyReadCh <- bodyReadMsg{st, n}: - case <-sc.doneServing: - } - } -} - -func (sc *serverConn) noteBodyRead(st *stream, n int) { - sc.serveG.check() - sc.sendWindowUpdate(nil, n) // conn-level - if st.state != stateHalfClosedRemote && st.state != stateClosed { - // Don't send this WINDOW_UPDATE if the stream is closed - // remotely. - sc.sendWindowUpdate(st, n) - } -} - -// st may be nil for conn-level -func (sc *serverConn) sendWindowUpdate(st *stream, n int) { - sc.serveG.check() - // "The legal range for the increment to the flow control - // window is 1 to 2^31-1 (2,147,483,647) octets." - // A Go Read call on 64-bit machines could in theory read - // a larger Read than this. Very unlikely, but we handle it here - // rather than elsewhere for now. - const maxUint31 = 1<<31 - 1 - for n >= maxUint31 { - sc.sendWindowUpdate32(st, maxUint31) - n -= maxUint31 - } - sc.sendWindowUpdate32(st, int32(n)) -} - -// st may be nil for conn-level -func (sc *serverConn) sendWindowUpdate32(st *stream, n int32) { - sc.serveG.check() - if n == 0 { - return - } - if n < 0 { - panic("negative update") - } - var streamID uint32 - if st != nil { - streamID = st.id - } - sc.writeFrame(FrameWriteRequest{ - write: writeWindowUpdate{streamID: streamID, n: uint32(n)}, - stream: st, - }) - var ok bool - if st == nil { - ok = sc.inflow.add(n) - } else { - ok = st.inflow.add(n) - } - if !ok { - panic("internal error; sent too many window updates without decrements?") - } -} - -// requestBody is the Handler's Request.Body type. -// Read and Close may be called concurrently. -type requestBody struct { - stream *stream - conn *serverConn - closed bool // for use by Close only - sawEOF bool // for use by Read only - pipe *pipe // non-nil if we have a HTTP entity message body - needsContinue bool // need to send a 100-continue -} - -func (b *requestBody) Close() error { - if b.pipe != nil && !b.closed { - b.pipe.BreakWithError(errClosedBody) - } - b.closed = true - return nil -} - -func (b *requestBody) Read(p []byte) (n int, err error) { - if b.needsContinue { - b.needsContinue = false - b.conn.write100ContinueHeaders(b.stream) - } - if b.pipe == nil || b.sawEOF { - return 0, io.EOF - } - n, err = b.pipe.Read(p) - if err == io.EOF { - b.sawEOF = true - } - if b.conn == nil && inTests { - return - } - b.conn.noteBodyReadFromHandler(b.stream, n, err) - return -} - -// responseWriter is the http.ResponseWriter implementation. It's -// intentionally small (1 pointer wide) to minimize garbage. The -// responseWriterState pointer inside is zeroed at the end of a -// request (in handlerDone) and calls on the responseWriter thereafter -// simply crash (caller's mistake), but the much larger responseWriterState -// and buffers are reused between multiple requests. -type responseWriter struct { - rws *responseWriterState -} - -// Optional http.ResponseWriter interfaces implemented. -var ( - _ http.CloseNotifier = (*responseWriter)(nil) - _ http.Flusher = (*responseWriter)(nil) - _ stringWriter = (*responseWriter)(nil) -) - -type responseWriterState struct { - // immutable within a request: - stream *stream - req *http.Request - body *requestBody // to close at end of request, if DATA frames didn't - conn *serverConn - - // TODO: adjust buffer writing sizes based on server config, frame size updates from peer, etc - bw *bufio.Writer // writing to a chunkWriter{this *responseWriterState} - - // mutated by http.Handler goroutine: - handlerHeader http.Header // nil until called - snapHeader http.Header // snapshot of handlerHeader at WriteHeader time - trailers []string // set in writeChunk - status int // status code passed to WriteHeader - wroteHeader bool // WriteHeader called (explicitly or implicitly). Not necessarily sent to user yet. - sentHeader bool // have we sent the header frame? - handlerDone bool // handler has finished - dirty bool // a Write failed; don't reuse this responseWriterState - - sentContentLen int64 // non-zero if handler set a Content-Length header - wroteBytes int64 - - closeNotifierMu sync.Mutex // guards closeNotifierCh - closeNotifierCh chan bool // nil until first used -} - -type chunkWriter struct{ rws *responseWriterState } - -func (cw chunkWriter) Write(p []byte) (n int, err error) { return cw.rws.writeChunk(p) } - -func (rws *responseWriterState) hasTrailers() bool { return len(rws.trailers) != 0 } - -// declareTrailer is called for each Trailer header when the -// response header is written. It notes that a header will need to be -// written in the trailers at the end of the response. -func (rws *responseWriterState) declareTrailer(k string) { - k = http.CanonicalHeaderKey(k) - if !httpguts.ValidTrailerHeader(k) { - // Forbidden by RFC 7230, section 4.1.2. - rws.conn.logf("ignoring invalid trailer %q", k) - return - } - if !strSliceContains(rws.trailers, k) { - rws.trailers = append(rws.trailers, k) - } -} - -// writeChunk writes chunks from the bufio.Writer. But because -// bufio.Writer may bypass its chunking, sometimes p may be -// arbitrarily large. -// -// writeChunk is also responsible (on the first chunk) for sending the -// HEADER response. -func (rws *responseWriterState) writeChunk(p []byte) (n int, err error) { - if !rws.wroteHeader { - rws.writeHeader(200) - } - - isHeadResp := rws.req.Method == "HEAD" - if !rws.sentHeader { - rws.sentHeader = true - var ctype, clen string - if clen = rws.snapHeader.Get("Content-Length"); clen != "" { - rws.snapHeader.Del("Content-Length") - clen64, err := strconv.ParseInt(clen, 10, 64) - if err == nil && clen64 >= 0 { - rws.sentContentLen = clen64 - } else { - clen = "" - } - } - if clen == "" && rws.handlerDone && bodyAllowedForStatus(rws.status) && (len(p) > 0 || !isHeadResp) { - clen = strconv.Itoa(len(p)) - } - _, hasContentType := rws.snapHeader["Content-Type"] - if !hasContentType && bodyAllowedForStatus(rws.status) && len(p) > 0 { - ctype = http.DetectContentType(p) - } - var date string - if _, ok := rws.snapHeader["Date"]; !ok { - // TODO(bradfitz): be faster here, like net/http? measure. - date = time.Now().UTC().Format(http.TimeFormat) - } - - for _, v := range rws.snapHeader["Trailer"] { - foreachHeaderElement(v, rws.declareTrailer) - } - - // "Connection" headers aren't allowed in HTTP/2 (RFC 7540, 8.1.2.2), - // but respect "Connection" == "close" to mean sending a GOAWAY and tearing - // down the TCP connection when idle, like we do for HTTP/1. - // TODO: remove more Connection-specific header fields here, in addition - // to "Connection". - if _, ok := rws.snapHeader["Connection"]; ok { - v := rws.snapHeader.Get("Connection") - delete(rws.snapHeader, "Connection") - if v == "close" { - rws.conn.startGracefulShutdown() - } - } - - endStream := (rws.handlerDone && !rws.hasTrailers() && len(p) == 0) || isHeadResp - err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{ - streamID: rws.stream.id, - httpResCode: rws.status, - h: rws.snapHeader, - endStream: endStream, - contentType: ctype, - contentLength: clen, - date: date, - }) - if err != nil { - rws.dirty = true - return 0, err - } - if endStream { - return 0, nil - } - } - if isHeadResp { - return len(p), nil - } - if len(p) == 0 && !rws.handlerDone { - return 0, nil - } - - if rws.handlerDone { - rws.promoteUndeclaredTrailers() - } - - endStream := rws.handlerDone && !rws.hasTrailers() - if len(p) > 0 || endStream { - // only send a 0 byte DATA frame if we're ending the stream. - if err := rws.conn.writeDataFromHandler(rws.stream, p, endStream); err != nil { - rws.dirty = true - return 0, err - } - } - - if rws.handlerDone && rws.hasTrailers() { - err = rws.conn.writeHeaders(rws.stream, &writeResHeaders{ - streamID: rws.stream.id, - h: rws.handlerHeader, - trailers: rws.trailers, - endStream: true, - }) - if err != nil { - rws.dirty = true - } - return len(p), err - } - return len(p), nil -} - -// TrailerPrefix is a magic prefix for ResponseWriter.Header map keys -// that, if present, signals that the map entry is actually for -// the response trailers, and not the response headers. The prefix -// is stripped after the ServeHTTP call finishes and the values are -// sent in the trailers. -// -// This mechanism is intended only for trailers that are not known -// prior to the headers being written. If the set of trailers is fixed -// or known before the header is written, the normal Go trailers mechanism -// is preferred: -// https://golang.org/pkg/net/http/#ResponseWriter -// https://golang.org/pkg/net/http/#example_ResponseWriter_trailers -const TrailerPrefix = "Trailer:" - -// promoteUndeclaredTrailers permits http.Handlers to set trailers -// after the header has already been flushed. Because the Go -// ResponseWriter interface has no way to set Trailers (only the -// Header), and because we didn't want to expand the ResponseWriter -// interface, and because nobody used trailers, and because RFC 7230 -// says you SHOULD (but not must) predeclare any trailers in the -// header, the official ResponseWriter rules said trailers in Go must -// be predeclared, and then we reuse the same ResponseWriter.Header() -// map to mean both Headers and Trailers. When it's time to write the -// Trailers, we pick out the fields of Headers that were declared as -// trailers. That worked for a while, until we found the first major -// user of Trailers in the wild: gRPC (using them only over http2), -// and gRPC libraries permit setting trailers mid-stream without -// predeclarnig them. So: change of plans. We still permit the old -// way, but we also permit this hack: if a Header() key begins with -// "Trailer:", the suffix of that key is a Trailer. Because ':' is an -// invalid token byte anyway, there is no ambiguity. (And it's already -// filtered out) It's mildly hacky, but not terrible. -// -// This method runs after the Handler is done and promotes any Header -// fields to be trailers. -func (rws *responseWriterState) promoteUndeclaredTrailers() { - for k, vv := range rws.handlerHeader { - if !strings.HasPrefix(k, TrailerPrefix) { - continue - } - trailerKey := strings.TrimPrefix(k, TrailerPrefix) - rws.declareTrailer(trailerKey) - rws.handlerHeader[http.CanonicalHeaderKey(trailerKey)] = vv - } - - if len(rws.trailers) > 1 { - sorter := sorterPool.Get().(*sorter) - sorter.SortStrings(rws.trailers) - sorterPool.Put(sorter) - } -} - -func (w *responseWriter) Flush() { - rws := w.rws - if rws == nil { - panic("Header called after Handler finished") - } - if rws.bw.Buffered() > 0 { - if err := rws.bw.Flush(); err != nil { - // Ignore the error. The frame writer already knows. - return - } - } else { - // The bufio.Writer won't call chunkWriter.Write - // (writeChunk with zero bytes, so we have to do it - // ourselves to force the HTTP response header and/or - // final DATA frame (with END_STREAM) to be sent. - rws.writeChunk(nil) - } -} - -func (w *responseWriter) CloseNotify() <-chan bool { - rws := w.rws - if rws == nil { - panic("CloseNotify called after Handler finished") - } - rws.closeNotifierMu.Lock() - ch := rws.closeNotifierCh - if ch == nil { - ch = make(chan bool, 1) - rws.closeNotifierCh = ch - cw := rws.stream.cw - go func() { - cw.Wait() // wait for close - ch <- true - }() - } - rws.closeNotifierMu.Unlock() - return ch -} - -func (w *responseWriter) Header() http.Header { - rws := w.rws - if rws == nil { - panic("Header called after Handler finished") - } - if rws.handlerHeader == nil { - rws.handlerHeader = make(http.Header) - } - return rws.handlerHeader -} - -// checkWriteHeaderCode is a copy of net/http's checkWriteHeaderCode. -func checkWriteHeaderCode(code int) { - // Issue 22880: require valid WriteHeader status codes. - // For now we only enforce that it's three digits. - // In the future we might block things over 599 (600 and above aren't defined - // at http://httpwg.org/specs/rfc7231.html#status.codes) - // and we might block under 200 (once we have more mature 1xx support). - // But for now any three digits. - // - // We used to send "HTTP/1.1 000 0" on the wire in responses but there's - // no equivalent bogus thing we can realistically send in HTTP/2, - // so we'll consistently panic instead and help people find their bugs - // early. (We can't return an error from WriteHeader even if we wanted to.) - if code < 100 || code > 999 { - panic(fmt.Sprintf("invalid WriteHeader code %v", code)) - } -} - -func (w *responseWriter) WriteHeader(code int) { - rws := w.rws - if rws == nil { - panic("WriteHeader called after Handler finished") - } - rws.writeHeader(code) -} - -func (rws *responseWriterState) writeHeader(code int) { - if !rws.wroteHeader { - checkWriteHeaderCode(code) - rws.wroteHeader = true - rws.status = code - if len(rws.handlerHeader) > 0 { - rws.snapHeader = cloneHeader(rws.handlerHeader) - } - } -} - -func cloneHeader(h http.Header) http.Header { - h2 := make(http.Header, len(h)) - for k, vv := range h { - vv2 := make([]string, len(vv)) - copy(vv2, vv) - h2[k] = vv2 - } - return h2 -} - -// The Life Of A Write is like this: -// -// * Handler calls w.Write or w.WriteString -> -// * -> rws.bw (*bufio.Writer) -> -// * (Handler might call Flush) -// * -> chunkWriter{rws} -// * -> responseWriterState.writeChunk(p []byte) -// * -> responseWriterState.writeChunk (most of the magic; see comment there) -func (w *responseWriter) Write(p []byte) (n int, err error) { - return w.write(len(p), p, "") -} - -func (w *responseWriter) WriteString(s string) (n int, err error) { - return w.write(len(s), nil, s) -} - -// either dataB or dataS is non-zero. -func (w *responseWriter) write(lenData int, dataB []byte, dataS string) (n int, err error) { - rws := w.rws - if rws == nil { - panic("Write called after Handler finished") - } - if !rws.wroteHeader { - w.WriteHeader(200) - } - if !bodyAllowedForStatus(rws.status) { - return 0, http.ErrBodyNotAllowed - } - rws.wroteBytes += int64(len(dataB)) + int64(len(dataS)) // only one can be set - if rws.sentContentLen != 0 && rws.wroteBytes > rws.sentContentLen { - // TODO: send a RST_STREAM - return 0, errors.New("http2: handler wrote more than declared Content-Length") - } - - if dataB != nil { - return rws.bw.Write(dataB) - } else { - return rws.bw.WriteString(dataS) - } -} - -func (w *responseWriter) handlerDone() { - rws := w.rws - dirty := rws.dirty - rws.handlerDone = true - w.Flush() - w.rws = nil - if !dirty { - // Only recycle the pool if all prior Write calls to - // the serverConn goroutine completed successfully. If - // they returned earlier due to resets from the peer - // there might still be write goroutines outstanding - // from the serverConn referencing the rws memory. See - // issue 20704. - responseWriterStatePool.Put(rws) - } -} - -// Push errors. -var ( - ErrRecursivePush = errors.New("http2: recursive push not allowed") - ErrPushLimitReached = errors.New("http2: push would exceed peer's SETTINGS_MAX_CONCURRENT_STREAMS") -) - -// pushOptions is the internal version of http.PushOptions, which we -// cannot include here because it's only defined in Go 1.8 and later. -type pushOptions struct { - Method string - Header http.Header -} - -func (w *responseWriter) push(target string, opts pushOptions) error { - st := w.rws.stream - sc := st.sc - sc.serveG.checkNotOn() - - // No recursive pushes: "PUSH_PROMISE frames MUST only be sent on a peer-initiated stream." - // http://tools.ietf.org/html/rfc7540#section-6.6 - if st.isPushed() { - return ErrRecursivePush - } - - // Default options. - if opts.Method == "" { - opts.Method = "GET" - } - if opts.Header == nil { - opts.Header = http.Header{} - } - wantScheme := "http" - if w.rws.req.TLS != nil { - wantScheme = "https" - } - - // Validate the request. - u, err := url.Parse(target) - if err != nil { - return err - } - if u.Scheme == "" { - if !strings.HasPrefix(target, "/") { - return fmt.Errorf("target must be an absolute URL or an absolute path: %q", target) - } - u.Scheme = wantScheme - u.Host = w.rws.req.Host - } else { - if u.Scheme != wantScheme { - return fmt.Errorf("cannot push URL with scheme %q from request with scheme %q", u.Scheme, wantScheme) - } - if u.Host == "" { - return errors.New("URL must have a host") - } - } - for k := range opts.Header { - if strings.HasPrefix(k, ":") { - return fmt.Errorf("promised request headers cannot include pseudo header %q", k) - } - // These headers are meaningful only if the request has a body, - // but PUSH_PROMISE requests cannot have a body. - // http://tools.ietf.org/html/rfc7540#section-8.2 - // Also disallow Host, since the promised URL must be absolute. - switch strings.ToLower(k) { - case "content-length", "content-encoding", "trailer", "te", "expect", "host": - return fmt.Errorf("promised request headers cannot include %q", k) - } - } - if err := checkValidHTTP2RequestHeaders(opts.Header); err != nil { - return err - } - - // The RFC effectively limits promised requests to GET and HEAD: - // "Promised requests MUST be cacheable [GET, HEAD, or POST], and MUST be safe [GET or HEAD]" - // http://tools.ietf.org/html/rfc7540#section-8.2 - if opts.Method != "GET" && opts.Method != "HEAD" { - return fmt.Errorf("method %q must be GET or HEAD", opts.Method) - } - - msg := &startPushRequest{ - parent: st, - method: opts.Method, - url: u, - header: cloneHeader(opts.Header), - done: errChanPool.Get().(chan error), - } - - select { - case <-sc.doneServing: - return errClientDisconnected - case <-st.cw: - return errStreamClosed - case sc.serveMsgCh <- msg: - } - - select { - case <-sc.doneServing: - return errClientDisconnected - case <-st.cw: - return errStreamClosed - case err := <-msg.done: - errChanPool.Put(msg.done) - return err - } -} - -type startPushRequest struct { - parent *stream - method string - url *url.URL - header http.Header - done chan error -} - -func (sc *serverConn) startPush(msg *startPushRequest) { - sc.serveG.check() - - // http://tools.ietf.org/html/rfc7540#section-6.6. - // PUSH_PROMISE frames MUST only be sent on a peer-initiated stream that - // is in either the "open" or "half-closed (remote)" state. - if msg.parent.state != stateOpen && msg.parent.state != stateHalfClosedRemote { - // responseWriter.Push checks that the stream is peer-initiaed. - msg.done <- errStreamClosed - return - } - - // http://tools.ietf.org/html/rfc7540#section-6.6. - if !sc.pushEnabled { - msg.done <- http.ErrNotSupported - return - } - - // PUSH_PROMISE frames must be sent in increasing order by stream ID, so - // we allocate an ID for the promised stream lazily, when the PUSH_PROMISE - // is written. Once the ID is allocated, we start the request handler. - allocatePromisedID := func() (uint32, error) { - sc.serveG.check() - - // Check this again, just in case. Technically, we might have received - // an updated SETTINGS by the time we got around to writing this frame. - if !sc.pushEnabled { - return 0, http.ErrNotSupported - } - // http://tools.ietf.org/html/rfc7540#section-6.5.2. - if sc.curPushedStreams+1 > sc.clientMaxStreams { - return 0, ErrPushLimitReached - } - - // http://tools.ietf.org/html/rfc7540#section-5.1.1. - // Streams initiated by the server MUST use even-numbered identifiers. - // A server that is unable to establish a new stream identifier can send a GOAWAY - // frame so that the client is forced to open a new connection for new streams. - if sc.maxPushPromiseID+2 >= 1<<31 { - sc.startGracefulShutdownInternal() - return 0, ErrPushLimitReached - } - sc.maxPushPromiseID += 2 - promisedID := sc.maxPushPromiseID - - // http://tools.ietf.org/html/rfc7540#section-8.2. - // Strictly speaking, the new stream should start in "reserved (local)", then - // transition to "half closed (remote)" after sending the initial HEADERS, but - // we start in "half closed (remote)" for simplicity. - // See further comments at the definition of stateHalfClosedRemote. - promised := sc.newStream(promisedID, msg.parent.id, stateHalfClosedRemote) - rw, req, err := sc.newWriterAndRequestNoBody(promised, requestParam{ - method: msg.method, - scheme: msg.url.Scheme, - authority: msg.url.Host, - path: msg.url.RequestURI(), - header: cloneHeader(msg.header), // clone since handler runs concurrently with writing the PUSH_PROMISE - }) - if err != nil { - // Should not happen, since we've already validated msg.url. - panic(fmt.Sprintf("newWriterAndRequestNoBody(%+v): %v", msg.url, err)) - } - - go sc.runHandler(rw, req, sc.handler.ServeHTTP) - return promisedID, nil - } - - sc.writeFrame(FrameWriteRequest{ - write: &writePushPromise{ - streamID: msg.parent.id, - method: msg.method, - url: msg.url, - h: msg.header, - allocatePromisedID: allocatePromisedID, - }, - stream: msg.parent, - done: msg.done, - }) -} - -// foreachHeaderElement splits v according to the "#rule" construction -// in RFC 7230 section 7 and calls fn for each non-empty element. -func foreachHeaderElement(v string, fn func(string)) { - v = textproto.TrimString(v) - if v == "" { - return - } - if !strings.Contains(v, ",") { - fn(v) - return - } - for _, f := range strings.Split(v, ",") { - if f = textproto.TrimString(f); f != "" { - fn(f) - } - } -} - -// From http://httpwg.org/specs/rfc7540.html#rfc.section.8.1.2.2 -var connHeaders = []string{ - "Connection", - "Keep-Alive", - "Proxy-Connection", - "Transfer-Encoding", - "Upgrade", -} - -// checkValidHTTP2RequestHeaders checks whether h is a valid HTTP/2 request, -// per RFC 7540 Section 8.1.2.2. -// The returned error is reported to users. -func checkValidHTTP2RequestHeaders(h http.Header) error { - for _, k := range connHeaders { - if _, ok := h[k]; ok { - return fmt.Errorf("request header %q is not valid in HTTP/2", k) - } - } - te := h["Te"] - if len(te) > 0 && (len(te) > 1 || (te[0] != "trailers" && te[0] != "")) { - return errors.New(`request header "TE" may only be "trailers" in HTTP/2`) - } - return nil -} - -func new400Handler(err error) http.HandlerFunc { - return func(w http.ResponseWriter, r *http.Request) { - http.Error(w, err.Error(), http.StatusBadRequest) - } -} - -// h1ServerKeepAlivesDisabled reports whether hs has its keep-alives -// disabled. See comments on h1ServerShutdownChan above for why -// the code is written this way. -func h1ServerKeepAlivesDisabled(hs *http.Server) bool { - var x interface{} = hs - type I interface { - doKeepAlives() bool - } - if hs, ok := x.(I); ok { - return !hs.doKeepAlives() - } - return false -} |