diff options
author | Marcel Amirault <ravlen@gmail.com> | 2019-05-05 15:04:54 +0300 |
---|---|---|
committer | Achilleas Pipinellis <axil@gitlab.com> | 2019-05-05 15:04:54 +0300 |
commit | 66b25804bcecefc5ee2147e426dfd5bb1e6e74ad (patch) | |
tree | 9cd9729c5acf199c58c0bd895e88d6a32c7195de /doc/integration/kerberos.md | |
parent | 0ca245317aa8fda8fc3dbab8042f5d42a41a649c (diff) |
Docs: Merge EE doc/integration to CE
Diffstat (limited to 'doc/integration/kerberos.md')
-rw-r--r-- | doc/integration/kerberos.md | 315 |
1 files changed, 315 insertions, 0 deletions
diff --git a/doc/integration/kerberos.md b/doc/integration/kerberos.md new file mode 100644 index 00000000000..44117755b83 --- /dev/null +++ b/doc/integration/kerberos.md @@ -0,0 +1,315 @@ +# Kerberos integration **[STARTER ONLY]** + +GitLab can integrate with [Kerberos][kerb] as an authentication mechanism. + +## Overview + +[Kerberos][kerb] is a secure method for authenticating a request for a service in a +computer network. Kerberos was developed in the Athena Project at the +[Massachusetts Institute of Technology (MIT)][mit]. The name is taken from Greek +mythology; Kerberos was a three-headed dog who guarded the gates of Hades. + +## Use-cases + +- GitLab can be configured to allow your users to sign with their Kerberos credentials. +- You can use Kerberos to [prevent][why-kerb] anyone from intercepting or eavesdropping on the transmitted password. + +## Configuration + +For GitLab to offer Kerberos token-based authentication, perform the +following prerequisites. You still need to configure your system for +Kerberos usage, such as specifying realms. GitLab will make use of the +system's Kerberos settings. + +### GitLab keytab + +1. Create a Kerberos Service Principal for the HTTP service on your GitLab server. + If your GitLab server is `gitlab.example.com` and your Kerberos realm + `EXAMPLE.COM`, create a Service Principal `HTTP/gitlab.example.com@EXAMPLE.COM` + in your Kerberos database. +1. Create a keytab on the GitLab server for the above Service Principal, e.g. + `/etc/http.keytab`. + +The keytab is a sensitive file and must be readable by the GitLab user. Set +ownership and protect the file appropriately: + +``` +sudo chown git /etc/http.keytab +sudo chmod 0600 /etc/http.keytab +``` + +### Configure GitLab + +**Installations from source** + +>**Note:** +For source installations, make sure the `kerberos` gem group +[has been installed](../install/installation.md#install-gems). + +1. Edit the kerberos section of [gitlab.yml] to enable Kerberos ticket-based + authentication. In most cases, you only need to enable Kerberos and specify + the location of the keytab: + + ```yaml + omniauth: + enabled: true + allow_single_sign_on: ['kerberos'] + + kerberos: + # Allow the HTTP Negotiate authentication method for Git clients + enabled: true + + # Kerberos 5 keytab file. The keytab file must be readable by the GitLab user, + # and should be different from other keytabs in the system. + # (default: use default keytab from Krb5 config) + keytab: /etc/http.keytab + ``` + +1. [Restart GitLab] for the changes to take effect. + +--- + +**Omnibus package installations** + +1. Edit `/etc/gitlab/gitlab.rb`: + + ```ruby + gitlab_rails['omniauth_enabled'] = true + gitlab_rails['omniauth_allow_single_sign_on'] = ['kerberos'] + + gitlab_rails['kerberos_enabled'] = true + gitlab_rails['kerberos_keytab'] = "/etc/http.keytab" + ``` + +1. [Reconfigure GitLab] for the changes to take effect. + +--- + +GitLab will now offer the `negotiate` authentication method for signing in and +HTTP Git access, enabling Git clients that support this authentication protocol +to authenticate with Kerberos tokens. + +## Creating and linking Kerberos accounts + +The Administrative user can navigate to **Admin > Users > Example User > Identities** +and attach a Kerberos account. Existing GitLab users can go to **Profile > Account** +and attach a Kerberos account. If you want to allow users without a GitLab +account to login, you should enable the option `allow_single_sign_on` as +described in the [Configure GitLab](#configure-gitlab) section. Then, the first +time a user signs in with Kerberos credentials, GitLab will create a new GitLab +user associated with the email, which is built from the Kerberos username and +realm. User accounts will be created automatically when authentication was +successful. + +## Linking Kerberos and LDAP accounts together + +If your users log in with Kerberos, but you also have [LDAP integration](../administration/auth/ldap.md) +enabled, then your users will be automatically linked to their LDAP accounts on +first login. For this to work, some prerequisites must be met: + +The Kerberos username must match the LDAP user's UID. You can choose which LDAP +attribute is used as the UID in GitLab's [LDAP configuration](../administration/auth/ldap.md#configuration) +but for Active Directory, this should be `sAMAccountName`. + +The Kerberos realm must match the domain part of the LDAP user's Distinguished +Name. For instance, if the Kerberos realm is `AD.EXAMPLE.COM`, then the LDAP +user's Distinguished Name should end in `dc=ad,dc=example,dc=com`. + +Taken together, these rules mean that linking will only work if your users' +Kerberos usernames are of the form `foo@AD.EXAMPLE.COM` and their +LDAP Distinguished Names look like `sAMAccountName=foo,dc=ad,dc=example,dc=com`. + +## HTTP Git access + +A linked Kerberos account enables you to `git pull` and `git push` using your +Kerberos account, as well as your standard GitLab credentials. + +GitLab users with a linked Kerberos account can also `git pull` and `git push` +using Kerberos tokens, i.e., without having to send their password with each +operation. + +### HTTP Git access with Kerberos token (passwordless authentication) + +#### Support for Git before 2.4 + +Until Git version 2.4, the `git` command uses only the `negotiate` authentication +method if the HTTP server offers it, even if this method fails (such as when +the client does not have a Kerberos token). It is thus not possible to fall back +to username/password (also known as `basic`) authentication if Kerberos +authentication fails. + +For GitLab users to be able to use either `basic` or `negotiate` authentication +with older Git versions, it is possible to offer Kerberos ticket-based +authentication on a different port (e.g. 8443) while the standard port will +keep offering only `basic` authentication. + +**For source installations with HTTPS** + +1. Edit the NGINX configuration file for GitLab + (e.g., `/etc/nginx/sites-available/gitlab-ssl`) and configure NGINX to + listen to port `8443` in addition to the standard HTTPS port: + + ```conf + server { + listen 0.0.0.0:443 ssl; + listen [::]:443 ipv6only=on ssl default_server; + listen 0.0.0.0:8443 ssl; + listen [::]:8443 ipv6only=on ssl; + ``` + +1. Update the Kerberos section of [gitlab.yml]: + + ```yaml + kerberos: + # Dedicated port: Git before 2.4 does not fall back to Basic authentication if Negotiate fails. + # To support both Basic and Negotiate methods with older versions of Git, configure + # nginx to proxy GitLab on an extra port (e.g. 8443) and uncomment the following lines + # to dedicate this port to Kerberos authentication. (default: false) + use_dedicated_port: true + port: 8443 + https: true + ``` + +1. [Restart GitLab] and NGINX for the changes to take effect. + +--- + +**For Omnibus package installations** + +1. Edit `/etc/gitlab/gitlab.rb`: + + ```ruby + gitlab_rails['kerberos_use_dedicated_port'] = true + gitlab_rails['kerberos_port'] = 8443 + gitlab_rails['kerberos_https'] = true + ``` + +1. [Reconfigure GitLab] for the changes to take effect. + +--- + +After this change, all Git remote URLs will have to be updated to +`https://gitlab.example.com:8443/mygroup/myproject.git` in order to use +Kerberos ticket-based authentication. + +## Upgrading from password-based to ticket-based Kerberos sign-ins + +Prior to GitLab 8.10 Enterprise Edition, users had to submit their +Kerberos username and password to GitLab when signing in. We will +remove support for password-based Kerberos sign-ins in a future +release, so we recommend that you upgrade to ticket-based sign-ins. + +Depending on your existing GitLab configuration, the 'Sign in with: +Kerberos Spnego' button may already be visible on your GitLab sign-in +page. If not, then add the settings [described above](#configuration). + +Once you have verified that the 'Kerberos Spnego' button works +without entering any passwords, you can proceed to disable +password-based Kerberos sign-ins. To do this you need only need to +remove the OmniAuth provider named `kerberos` from your `gitlab.yml` / +`gitlab.rb` file. + +**For installations from source** + +1. Edit [gitlab.yml] and remove the `- { name: 'kerberos' }` line under omniauth + providers: + + ```yaml + omniauth: + # ... + providers: + - { name: 'kerberos' } # <-- remove this line + ``` + +1. [Restart GitLab] for the changes to take effect. + +--- + +**For Omnibus installations** + +1. Edit `/etc/gitlab/gitlab.rb` and remove the `{ "name" => "kerberos" }` line + under `gitlab_rails['omniauth_providers']`: + + ```ruby + gitlab_rails['omniauth_providers'] = [ + { "name" => "kerberos" } # <-- remove this entry + ] + ``` + +1. [Reconfigure GitLab] for the changes to take effect. + +## Support for Active Directory Kerberos environments + +When using Kerberos ticket-based authentication in an Active Directory domain, +it may be necessary to increase the maximum header size allowed by NGINX, +as extensions to the Kerberos protocol may result in HTTP authentication headers +larger than the default size of 8kB. Configure `large_client_header_buffers` +to a larger value in [the NGINX configuration][nginx]. + +## Troubleshooting + +### Unsupported GSSAPI mechanism + +With Kerberos SPNEGO authentication, the browser is expected to send a list of +mechanisms it supports to GitLab. If it doesn't support any of the mechanisms +GitLab supports, authentication will fail with a message like this in the log: + +``` +OmniauthKerberosSpnegoController: failed to process Negotiate/Kerberos authentication: gss_accept_sec_context did not return GSS_S_COMPLETE: An unsupported mechanism was requested Unknown error +``` + +This is usually seen when the browser is unable to contact the Kerberos server +directly. It will fall back to an unsupported mechanism known as +[`IAKERB`](https://k5wiki.kerberos.org/wiki/Projects/IAKERB), which tries to use +the GitLab server as an intermediary to the Kerberos server. + +If you're experiencing this error, ensure there is connectivity between the +client machine and the Kerberos server - this is a prerequisite! Traffic may be +blocked by a firewall, or the DNS records may be incorrect. + +Another failure mode occurs when the forward and reverse DNS records for the +GitLab server do not match. Often, Windows clients will work in this case, while +Linux clients will fail. They use reverse DNS while detecting the Kerberos +realm. If they get the wrong realm, then ordinary Kerberos mechanisms will fail, +so the client will fall back to attempting to negotiate `IAKERB`, leading to the +above error message. + +To fix this, ensure that the forward and reverse DNS for your GitLab server +match. So for instance, if you acces GitLab as `gitlab.example.com`, resolving +to IP address `1.2.3.4`, then `4.3.2.1.in-addr.arpa` must be a PTR record for +`gitlab.example.com`. + +Finally, it's possible that the browser or client machine lack Kerberos support +completely. Ensure that the Kerberos libraries are installed and that you can +authenticate to other Kerberos services. + +### HTTP Basic: Access denied when cloning + +```sh +remote: HTTP Basic: Access denied +fatal: Authentication failed for '<KRB5 path>' +``` + +If you are using Git v2.11 or newer and see the above error when cloning, you can +set the `http.emptyAuth` Git option to `true` to fix this: + +``` +git config --global http.emptyAuth true +``` + +See also: [Git v2.11 release notes](https://github.com/git/git/blob/master/Documentation/RelNotes/2.11.0.txt#L482-L486) + +## Helpful links + +- <https://help.ubuntu.com/community/Kerberos> +- <http://blog.manula.org/2012/04/setting-up-kerberos-server-with-debian.html> +- <http://www.roguelynn.com/words/explain-like-im-5-kerberos/> + +[gitlab.yml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/gitlab.yml.example +[restart gitlab]: ../administration/restart_gitlab.md#installations-from-source +[reconfigure gitlab]: ../administration/restart_gitlab.md#omnibus-gitlab-reconfigure +[nginx]: http://nginx.org/en/docs/http/ngx_http_core_module.html#large_client_header_buffers +[kerb]: https://web.mit.edu/kerberos/ +[mit]: http://web.mit.edu/ +[why-kerb]: http://web.mit.edu/sipb/doc/working/guide/guide/node20.html +[ee]: https://about.gitlab.com/pricing/ |