diff options
author | Marcel Amirault <mamirault@gitlab.com> | 2019-07-09 10:16:17 +0300 |
---|---|---|
committer | Achilleas Pipinellis <axil@gitlab.com> | 2019-07-09 10:16:17 +0300 |
commit | 5abfc57ec3bf2ff910e524e282f0e9b16112c784 (patch) | |
tree | c1c69bb393dca40f9cb243170ac9217e58cfca0c /doc | |
parent | 84b49ef3a31e93d7f2501d30adb4965c0a18c59b (diff) |
Fix spacing of code blocks
Code blocks should not be spaced 4 times, as this will
prevent the code from being colored. They should
also be spaced the same as the lists they are a part
of, to make reading easier.
Diffstat (limited to 'doc')
25 files changed, 909 insertions, 888 deletions
diff --git a/doc/administration/container_registry.md b/doc/administration/container_registry.md index 2e4b4efa0ac..04f52783d22 100644 --- a/doc/administration/container_registry.md +++ b/doc/administration/container_registry.md @@ -1,7 +1,5 @@ # GitLab Container Registry administration -> **Notes:** -> > - [Introduced][ce-4040] in GitLab 8.8. > - Container Registry manifest `v1` support was added in GitLab 8.9 to support > Docker versions earlier than 1.10. @@ -125,21 +123,21 @@ otherwise you will run into conflicts. 1. Your `/etc/gitlab/gitlab.rb` should contain the Registry URL as well as the path to the existing TLS certificate and key used by GitLab: - ```ruby - registry_external_url 'https://gitlab.example.com:4567' - ``` + ```ruby + registry_external_url 'https://gitlab.example.com:4567' + ``` - Note how the `registry_external_url` is listening on HTTPS under the - existing GitLab URL, but on a different port. + Note how the `registry_external_url` is listening on HTTPS under the + existing GitLab URL, but on a different port. - If your TLS certificate is not in `/etc/gitlab/ssl/gitlab.example.com.crt` - and key not in `/etc/gitlab/ssl/gitlab.example.com.key` uncomment the lines - below: + If your TLS certificate is not in `/etc/gitlab/ssl/gitlab.example.com.crt` + and key not in `/etc/gitlab/ssl/gitlab.example.com.key` uncomment the lines + below: - ```ruby - registry_nginx['ssl_certificate'] = "/path/to/certificate.pem" - registry_nginx['ssl_certificate_key'] = "/path/to/certificate.key" - ``` + ```ruby + registry_nginx['ssl_certificate'] = "/path/to/certificate.pem" + registry_nginx['ssl_certificate_key'] = "/path/to/certificate.key" + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -150,12 +148,12 @@ otherwise you will run into conflicts. 1. Open `/home/git/gitlab/config/gitlab.yml`, find the `registry` entry and configure it with the following settings: - ``` - registry: - enabled: true - host: gitlab.example.com - port: 4567 - ``` + ``` + registry: + enabled: true + host: gitlab.example.com + port: 4567 + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. 1. Make the relevant changes in NGINX as well (domain, port, TLS certificates path). @@ -188,17 +186,17 @@ Let's assume that you want the container Registry to be accessible at `/etc/gitlab/ssl/registry.gitlab.example.com.key` and make sure they have correct permissions: - ```bash - chmod 600 /etc/gitlab/ssl/registry.gitlab.example.com.* - ``` + ```bash + chmod 600 /etc/gitlab/ssl/registry.gitlab.example.com.* + ``` 1. Once the TLS certificate is in place, edit `/etc/gitlab/gitlab.rb` with: - ```ruby - registry_external_url 'https://registry.gitlab.example.com' - ``` + ```ruby + registry_external_url 'https://registry.gitlab.example.com' + ``` - Note how the `registry_external_url` is listening on HTTPS. + Note how the `registry_external_url` is listening on HTTPS. 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -219,11 +217,11 @@ look like: 1. Open `/home/git/gitlab/config/gitlab.yml`, find the `registry` entry and configure it with the following settings: - ``` - registry: - enabled: true - host: registry.gitlab.example.com - ``` + ```yaml + registry: + enabled: true + host: registry.gitlab.example.com + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. 1. Make the relevant changes in NGINX as well (domain, port, TLS certificates path). @@ -248,9 +246,9 @@ Registry application itself. 1. Open `/etc/gitlab/gitlab.rb` and set `registry['enable']` to `false`: - ```ruby - registry['enable'] = false - ``` + ```ruby + registry['enable'] = false + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -261,10 +259,10 @@ Registry application itself. 1. Open `/home/git/gitlab/config/gitlab.yml`, find the `registry` entry and set `enabled` to `false`: - ``` - registry: - enabled: false - ``` + ```yaml + registry: + enabled: false + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -280,9 +278,9 @@ the Container Registry by themselves, follow the steps below. 1. Edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['gitlab_default_projects_features_container_registry'] = false - ``` + ```ruby + gitlab_rails['gitlab_default_projects_features_container_registry'] = false + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -293,16 +291,16 @@ the Container Registry by themselves, follow the steps below. 1. Open `/home/git/gitlab/config/gitlab.yml`, find the `default_projects_features` entry and configure it so that `container_registry` is set to `false`: - ``` - ## Default project features settings - default_projects_features: - issues: true - merge_requests: true - wiki: true - snippets: false - builds: true - container_registry: false - ``` + ```yaml + ## Default project features settings + default_projects_features: + issues: true + merge_requests: true + wiki: true + snippets: false + builds: true + container_registry: false + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -332,9 +330,9 @@ The default location where images are stored in Omnibus, is 1. Edit `/etc/gitlab/gitlab.rb`: - ```ruby - gitlab_rails['registry_path'] = "/path/to/registry/storage" - ``` + ```ruby + gitlab_rails['registry_path'] = "/path/to/registry/storage" + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -348,10 +346,10 @@ The default location where images are stored in source installations, is 1. Open `/home/git/gitlab/config/gitlab.yml`, find the `registry` entry and change the `path` setting: - ``` - registry: - path: shared/registry - ``` + ```yaml + registry: + path: shared/registry + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -393,17 +391,17 @@ To configure the `s3` storage driver in Omnibus: 1. Edit `/etc/gitlab/gitlab.rb`: - ```ruby - registry['storage'] = { - 's3' => { - 'accesskey' => 's3-access-key', - 'secretkey' => 's3-secret-key-for-access-key', - 'bucket' => 'your-s3-bucket', - 'region' => 'your-s3-region', - 'regionendpoint' => 'your-s3-regionendpoint' - } - } - ``` + ```ruby + registry['storage'] = { + 's3' => { + 'accesskey' => 's3-access-key', + 'secretkey' => 's3-secret-key-for-access-key', + 'bucket' => 'your-s3-bucket', + 'region' => 'your-s3-region', + 'regionendpoint' => 'your-s3-regionendpoint' + } + } + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -442,9 +440,9 @@ In the examples below we set the Registry's port to `5001`. 1. Open `/etc/gitlab/gitlab.rb` and set `registry['registry_http_addr']`: - ```ruby - registry['registry_http_addr'] = "localhost:5001" - ``` + ```ruby + registry['registry_http_addr'] = "localhost:5001" + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -455,10 +453,10 @@ In the examples below we set the Registry's port to `5001`. 1. Open the configuration file of your Registry server and edit the [`http:addr`][registry-http-config] value: - ``` - http - addr: localhost:5001 - ``` + ```yaml + http + addr: localhost:5001 + ``` 1. Save the file and restart the Registry server. @@ -476,14 +474,14 @@ You can use GitLab as an auth endpoint and use a non-bundled Container Registry. 1. Open `/etc/gitlab/gitlab.rb` and set necessary configurations: - ```ruby - gitlab_rails['registry_enabled'] = true - gitlab_rails['registry_host'] = "registry.gitlab.example.com" - gitlab_rails['registry_port'] = "5005" - gitlab_rails['registry_api_url'] = "http://localhost:5000" - gitlab_rails['registry_path'] = "/var/opt/gitlab/gitlab-rails/shared/registry" - gitlab_rails['registry_issuer'] = "omnibus-gitlab-issuer" - ``` + ```ruby + gitlab_rails['registry_enabled'] = true + gitlab_rails['registry_host'] = "registry.gitlab.example.com" + gitlab_rails['registry_port'] = "5005" + gitlab_rails['registry_api_url'] = "http://localhost:5000" + gitlab_rails['registry_path'] = "/var/opt/gitlab/gitlab-rails/shared/registry" + gitlab_rails['registry_issuer'] = "omnibus-gitlab-issuer" + ``` 1. A certificate keypair is required for GitLab and the Container Registry to communicate securely. By default omnibus-gitlab will generate one keypair, @@ -492,19 +490,19 @@ You can use GitLab as an auth endpoint and use a non-bundled Container Registry. custom certificate key. To do that, add the following to `/etc/gitlab/gitlab.rb` - ```ruby - gitlab_rails['registry_key_path'] = "/custom/path/to/registry-key.key" - # registry['internal_key'] should contain the contents of the custom key - # file. Line breaks in the key file should be marked using `\n` character - # Example: - registry['internal_key'] = "---BEGIN RSA PRIVATE KEY---\nMIIEpQIBAA\n" - ``` + ```ruby + gitlab_rails['registry_key_path'] = "/custom/path/to/registry-key.key" + # registry['internal_key'] should contain the contents of the custom key + # file. Line breaks in the key file should be marked using `\n` character + # Example: + registry['internal_key'] = "---BEGIN RSA PRIVATE KEY---\nMIIEpQIBAA\n" + ``` - **Note:** The file specified at `registry_key_path` gets populated with the - content specified by `internal_key`, each time reconfigure is executed. If - no file is specified, omnibus-gitlab will default it to - `/var/opt/gitlab/gitlab-rails/etc/gitlab-registry.key` and will populate - it. + **Note:** The file specified at `registry_key_path` gets populated with the + content specified by `internal_key`, each time reconfigure is executed. If + no file is specified, omnibus-gitlab will default it to + `/var/opt/gitlab/gitlab-rails/etc/gitlab-registry.key` and will populate + it. 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -512,18 +510,18 @@ You can use GitLab as an auth endpoint and use a non-bundled Container Registry. 1. Open `/home/git/gitlab/config/gitlab.yml`, and edit the configuration settings under `registry`: - ``` - ## Container Registry + ```yaml + ## Container Registry - registry: - enabled: true - host: "registry.gitlab.example.com" - port: "5005" - api_url: "http://localhost:5000" - path: /var/opt/gitlab/gitlab-rails/shared/registry - key: /var/opt/gitlab/gitlab-rails/certificate.key - issuer: omnibus-gitlab-issuer - ``` + registry: + enabled: true + host: "registry.gitlab.example.com" + port: "5005" + api_url: "http://localhost:5000" + path: /var/opt/gitlab/gitlab-rails/shared/registry + key: /var/opt/gitlab/gitlab-rails/certificate.key + issuer: omnibus-gitlab-issuer + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -550,20 +548,20 @@ To configure a notification endpoint in Omnibus: 1. Edit `/etc/gitlab/gitlab.rb`: - ```ruby - registry['notifications'] = [ - { - 'name' => 'test_endpoint', - 'url' => 'https://gitlab.example.com/notify', - 'timeout' => '500ms', - 'threshold' => 5, - 'backoff' => '1s', - 'headers' => { - "Authorization" => ["AUTHORIZATION_EXAMPLE_TOKEN"] - } - } - ] - ``` + ```ruby + registry['notifications'] = [ + { + 'name' => 'test_endpoint', + 'url' => 'https://gitlab.example.com/notify', + 'timeout' => '500ms', + 'threshold' => 5, + 'backoff' => '1s', + 'headers' => { + "Authorization" => ["AUTHORIZATION_EXAMPLE_TOKEN"] + } + } + ] + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -629,16 +627,16 @@ Start with a value between `25000000` (25MB) and `50000000` (50MB). 1. Edit `/etc/gitlab/gitlab.rb`: - ```ruby - registry['storage'] = { - 's3' => { - 'accesskey' => 'AKIAKIAKI', - 'secretkey' => 'secret123', - 'bucket' => 'gitlab-registry-bucket-AKIAKIAKI', - 'chunksize' => 25000000 - } - } - ``` + ```ruby + registry['storage'] = { + 's3' => { + 'accesskey' => 'AKIAKIAKI', + 'secretkey' => 'secret123', + 'bucket' => 'gitlab-registry-bucket-AKIAKIAKI', + 'chunksize' => 25000000 + } + } + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -648,14 +646,14 @@ Start with a value between `25000000` (25MB) and `50000000` (50MB). 1. Edit `config/gitlab.yml`: - ```yaml - storage: - s3: - accesskey: 'AKIAKIAKI' - secretkey: 'secret123' - bucket: 'gitlab-registry-bucket-AKIAKIAKI' - chunksize: 25000000 - ``` + ```yaml + storage: + s3: + accesskey: 'AKIAKIAKI' + secretkey: 'secret123' + bucket: 'gitlab-registry-bucket-AKIAKIAKI' + chunksize: 25000000 + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -669,9 +667,9 @@ You can add a configuration option for backwards compatibility. 1. Edit `/etc/gitlab/gitlab.rb`: - ```ruby - registry['compatibility_schema1_enabled'] = true - ``` + ```ruby + registry['compatibility_schema1_enabled'] = true + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -681,11 +679,11 @@ You can add a configuration option for backwards compatibility. 1. Edit the YML configuration file you created when you [deployed the registry][registry-deploy]. Add the following snippet: - ```yaml - compatibility: - schema1: - enabled: true - ``` + ```yaml + compatibility: + schema1: + enabled: true + ``` 1. Restart the registry for the changes to take affect. @@ -694,9 +692,9 @@ You can add a configuration option for backwards compatibility. A Docker connection error can occur when there are special characters in either the group, project or branch name. Special characters can include: -* Leading underscore -* Trailing hyphen/dash -* Double hyphen/dash +- Leading underscore +- Trailing hyphen/dash +- Double hyphen/dash To get around this, you can [change the group path](../user/group/index.md#changing-a-groups-path), [change the project path](../user/project/settings/index.md#renaming-a-repository) or change the diff --git a/doc/administration/database_load_balancing.md b/doc/administration/database_load_balancing.md index e76d3b14a40..dc4cc401fca 100644 --- a/doc/administration/database_load_balancing.md +++ b/doc/administration/database_load_balancing.md @@ -74,9 +74,9 @@ the following. This will balance the load between `host1.example.com` and 1. Edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['db_load_balancing'] = { 'hosts' => ['host1.example.com', 'host2.example.com'] } - ``` + ```ruby + gitlab_rails['db_load_balancing'] = { 'hosts' => ['host1.example.com', 'host2.example.com'] } + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -86,16 +86,16 @@ the following. This will balance the load between `host1.example.com` and 1. Edit `/home/git/gitlab/config/database.yml` and add or amend the following lines: - ```yaml - production: - username: gitlab - database: gitlab - encoding: unicode - load_balancing: - hosts: - - host1.example.com - - host2.example.com - ``` + ```yaml + production: + username: gitlab + database: gitlab + encoding: unicode + load_balancing: + hosts: + - host1.example.com + - host2.example.com + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. diff --git a/doc/administration/incoming_email.md b/doc/administration/incoming_email.md index 53a61358670..73a39a6dd35 100644 --- a/doc/administration/incoming_email.md +++ b/doc/administration/incoming_email.md @@ -102,16 +102,16 @@ for a real-world example of this exploit. 1. Reconfigure GitLab for the changes to take effect: - ```sh - sudo gitlab-ctl reconfigure - sudo gitlab-ctl restart - ``` + ```sh + sudo gitlab-ctl reconfigure + sudo gitlab-ctl restart + ``` 1. Verify that everything is configured correctly: - ```sh - sudo gitlab-rake gitlab:incoming_email:check - ``` + ```sh + sudo gitlab-rake gitlab:incoming_email:check + ``` Reply by email should now be working. @@ -119,31 +119,31 @@ Reply by email should now be working. 1. Go to the GitLab installation directory: - ```sh - cd /home/git/gitlab - ``` + ```sh + cd /home/git/gitlab + ``` 1. Find the `incoming_email` section in `config/gitlab.yml`, enable the feature and fill in the details for your specific IMAP server and email account (see [examples](#config-examples) below). 1. Enable `mail_room` in the init script at `/etc/default/gitlab`: - ```sh - sudo mkdir -p /etc/default - echo 'mail_room_enabled=true' | sudo tee -a /etc/default/gitlab - ``` + ```sh + sudo mkdir -p /etc/default + echo 'mail_room_enabled=true' | sudo tee -a /etc/default/gitlab + ``` 1. Restart GitLab: - ```sh - sudo service gitlab restart - ``` + ```sh + sudo service gitlab restart + ``` 1. Verify that everything is configured correctly: - ```sh - sudo -u git -H bundle exec rake gitlab:incoming_email:check RAILS_ENV=production - ``` + ```sh + sudo -u git -H bundle exec rake gitlab:incoming_email:check RAILS_ENV=production + ``` Reply by email should now be working. diff --git a/doc/administration/issue_closing_pattern.md b/doc/administration/issue_closing_pattern.md index f2877c49d05..e1bbabb2878 100644 --- a/doc/administration/issue_closing_pattern.md +++ b/doc/administration/issue_closing_pattern.md @@ -27,9 +27,10 @@ Because Rubular doesn't understand `%{issue_ref}`, you can replace this by 1. Change the value of `gitlab_rails['gitlab_issue_closing_pattern']` to a regular expression of your liking: - ```ruby - gitlab_rails['gitlab_issue_closing_pattern'] = "\b((?:[Cc]los(?:e[sd]|ing)|\b[Ff]ix(?:e[sd]|ing)?) +(?:(?:issues? +)?%{issue_ref}(?:(?:, *| +and +)?))+)" - ``` + ```ruby + gitlab_rails['gitlab_issue_closing_pattern'] = "\b((?:[Cc]los(?:e[sd]|ing)|\b[Ff]ix(?:e[sd]|ing)?) +(?:(?:issues? +)?%{issue_ref}(?:(?:, *| +and +)?))+)" + ``` + 1. [Reconfigure] GitLab for the changes to take effect. **For installations from source** @@ -37,9 +38,9 @@ Because Rubular doesn't understand `%{issue_ref}`, you can replace this by 1. Open `gitlab.yml` with your editor. 1. Change the value of `issue_closing_pattern`: - ```yaml - issue_closing_pattern: "\b((?:[Cc]los(?:e[sd]|ing)|\b[Ff]ix(?:e[sd]|ing)?) +(?:(?:issues? +)?%{issue_ref}(?:(?:, *| +and +)?))+)" - ``` + ```yaml + issue_closing_pattern: "\b((?:[Cc]los(?:e[sd]|ing)|\b[Ff]ix(?:e[sd]|ing)?) +(?:(?:issues? +)?%{issue_ref}(?:(?:, *| +and +)?))+)" + ``` 1. [Restart] GitLab for the changes to take effect. diff --git a/doc/administration/job_artifacts.md b/doc/administration/job_artifacts.md index 05e15fc303b..9df7b2526e2 100644 --- a/doc/administration/job_artifacts.md +++ b/doc/administration/job_artifacts.md @@ -1,7 +1,5 @@ # Jobs artifacts administration -> **Notes:** -> > - Introduced in GitLab 8.2 and GitLab Runner 0.7.0. > - Starting with GitLab 8.4 and GitLab Runner 1.0, the artifacts archive format changed to `ZIP`. > - Starting with GitLab 8.17, builds are renamed to jobs. @@ -21,9 +19,9 @@ To disable artifacts site-wide, follow the steps below. 1. Edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['artifacts_enabled'] = false - ``` + ```ruby + gitlab_rails['artifacts_enabled'] = false + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -33,10 +31,10 @@ To disable artifacts site-wide, follow the steps below. 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - artifacts: - enabled: false - ``` + ```yaml + artifacts: + enabled: false + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -61,9 +59,9 @@ _The artifacts are stored by default in 1. To change the storage path for example to `/mnt/storage/artifacts`, edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['artifacts_path'] = "/mnt/storage/artifacts" - ``` + ```ruby + gitlab_rails['artifacts_path'] = "/mnt/storage/artifacts" + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -77,18 +75,16 @@ _The artifacts are stored by default in 1. To change the storage path for example to `/mnt/storage/artifacts`, edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - artifacts: - enabled: true - path: /mnt/storage/artifacts - ``` + ```yaml + artifacts: + enabled: true + path: /mnt/storage/artifacts + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. ### Using object storage -> **Notes:** -> > - [Introduced](https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/1762) in > [GitLab Premium](https://about.gitlab.com/pricing/) 9.4. > - Since version 9.5, artifacts are [browsable](../user/project/pipelines/job_artifacts.md#browsing-artifacts), @@ -141,35 +137,35 @@ _The artifacts are stored by default in 1. Edit `/etc/gitlab/gitlab.rb` and add the following lines by replacing with the values you want: - ```ruby - gitlab_rails['artifacts_enabled'] = true - gitlab_rails['artifacts_object_store_enabled'] = true - gitlab_rails['artifacts_object_store_remote_directory'] = "artifacts" - gitlab_rails['artifacts_object_store_connection'] = { - 'provider' => 'AWS', - 'region' => 'eu-central-1', - 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', - 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' - } - ``` - - NOTE: For GitLab 9.4+, if you are using AWS IAM profiles, be sure to omit the - AWS access key and secret access key/value pairs. For example: - - ```ruby - gitlab_rails['artifacts_object_store_connection'] = { - 'provider' => 'AWS', - 'region' => 'eu-central-1', - 'use_iam_profile' => true - } - ``` + ```ruby + gitlab_rails['artifacts_enabled'] = true + gitlab_rails['artifacts_object_store_enabled'] = true + gitlab_rails['artifacts_object_store_remote_directory'] = "artifacts" + gitlab_rails['artifacts_object_store_connection'] = { + 'provider' => 'AWS', + 'region' => 'eu-central-1', + 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', + 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' + } + ``` + + NOTE: For GitLab 9.4+, if you are using AWS IAM profiles, be sure to omit the + AWS access key and secret access key/value pairs. For example: + + ```ruby + gitlab_rails['artifacts_object_store_connection'] = { + 'provider' => 'AWS', + 'region' => 'eu-central-1', + 'use_iam_profile' => true + } + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. 1. Migrate any existing local artifacts to the object storage: - ```bash - gitlab-rake gitlab:artifacts:migrate - ``` + ```bash + gitlab-rake gitlab:artifacts:migrate + ``` --- @@ -181,25 +177,25 @@ _The artifacts are stored by default in 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - artifacts: - enabled: true - object_store: - enabled: true - remote_directory: "artifacts" # The bucket name - connection: - provider: AWS # Only AWS supported at the moment - aws_access_key_id: AWS_ACCESS_KEY_ID - aws_secret_access_key: AWS_SECRET_ACCESS_KEY - region: eu-central-1 - ``` + ```yaml + artifacts: + enabled: true + object_store: + enabled: true + remote_directory: "artifacts" # The bucket name + connection: + provider: AWS # Only AWS supported at the moment + aws_access_key_id: AWS_ACCESS_KEY_ID + aws_secret_access_key: AWS_SECRET_ACCESS_KEY + region: eu-central-1 + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. 1. Migrate any existing local artifacts to the object storage: - ```bash - sudo -u git -H bundle exec rake gitlab:artifacts:migrate RAILS_ENV=production - ``` + ```bash + sudo -u git -H bundle exec rake gitlab:artifacts:migrate RAILS_ENV=production + ``` ## Expiring artifacts @@ -217,9 +213,9 @@ steps below. 1. Edit `/etc/gitlab/gitlab.rb` and comment out or add the following line - ```ruby - gitlab_rails['expire_build_artifacts_worker_cron'] = "50 * * * *" - ``` + ```ruby + gitlab_rails['expire_build_artifacts_worker_cron'] = "50 * * * *" + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -230,10 +226,10 @@ steps below. 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - expire_build_artifacts_worker: - cron: "50 * * * *" - ``` + ```yaml + expire_build_artifacts_worker: + cron: "50 * * * *" + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -250,15 +246,15 @@ you can flip the feature flag from a Rails console. 1. Enter the Rails console: - ```sh - sudo gitlab-rails console - ``` + ```sh + sudo gitlab-rails console + ``` 1. Flip the switch and disable it: - ```ruby - Feature.enable('ci_disable_validates_dependencies') - ``` + ```ruby + Feature.enable('ci_disable_validates_dependencies') + ``` --- @@ -266,16 +262,16 @@ you can flip the feature flag from a Rails console. 1. Enter the Rails console: - ```sh - cd /home/git/gitlab - RAILS_ENV=production sudo -u git -H bundle exec rails console - ``` + ```sh + cd /home/git/gitlab + RAILS_ENV=production sudo -u git -H bundle exec rails console + ``` 1. Flip the switch and disable it: - ```ruby - Feature.enable('ci_disable_validates_dependencies') - ``` + ```ruby + Feature.enable('ci_disable_validates_dependencies') + ``` ## Set the maximum file size of the artifacts diff --git a/doc/administration/job_traces.md b/doc/administration/job_traces.md index 6556614723d..957916893d7 100644 --- a/doc/administration/job_traces.md +++ b/doc/administration/job_traces.md @@ -25,11 +25,11 @@ To change the location where the job logs will be stored, follow the steps below **In Omnibus installations:** -1. Edit `/etc/gitlab/gitlab.rb` and add or amend the following line: +1. Edit `/etc/gitlab/gitlab.rb` and add or amend the following line: - ``` - gitlab_ci['builds_directory'] = '/mnt/to/gitlab-ci/builds' - ``` + ```ruby + gitlab_ci['builds_directory'] = '/mnt/to/gitlab-ci/builds' + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -39,12 +39,12 @@ To change the location where the job logs will be stored, follow the steps below 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - gitlab_ci: - # The location where build traces are stored (default: builds/). - # Relative paths are relative to Rails.root. - builds_path: path/to/builds/ - ``` + ```yaml + gitlab_ci: + # The location where build traces are stored (default: builds/). + # Relative paths are relative to Rails.root. + builds_path: path/to/builds/ + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -67,24 +67,24 @@ To archive those legacy job traces, please follow the instruction below. 1. Execute the following command - ```bash - gitlab-rake gitlab:traces:archive - ``` + ```bash + gitlab-rake gitlab:traces:archive + ``` - After you executed this task, GitLab instance queues up Sidekiq jobs (asynchronous processes) - for migrating job trace files from local storage to object storage. - It could take time to complete the all migration jobs. You can check the progress by the following command + After you executed this task, GitLab instance queues up Sidekiq jobs (asynchronous processes) + for migrating job trace files from local storage to object storage. + It could take time to complete the all migration jobs. You can check the progress by the following command - ```bash - sudo gitlab-rails console - ``` + ```bash + sudo gitlab-rails console + ``` - ```bash - [1] pry(main)> Sidekiq::Stats.new.queues['pipeline_background:archive_trace'] - => 100 - ``` + ```bash + [1] pry(main)> Sidekiq::Stats.new.queues['pipeline_background:archive_trace'] + => 100 + ``` - If the count becomes zero, the archiving processes are done + If the count becomes zero, the archiving processes are done ## How to migrate archived job traces to object storage diff --git a/doc/administration/merge_request_diffs.md b/doc/administration/merge_request_diffs.md index c328d4c3aaa..99cd9051778 100644 --- a/doc/administration/merge_request_diffs.md +++ b/doc/administration/merge_request_diffs.md @@ -21,18 +21,18 @@ To enable external storage of merge request diffs, follow the instructions below 1. Edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['external_diffs_enabled'] = true - ``` + ```ruby + gitlab_rails['external_diffs_enabled'] = true + ``` 1. _The external diffs will be stored in in `/var/opt/gitlab/gitlab-rails/shared/external-diffs`._ To change the path, for example, to `/mnt/storage/external-diffs`, edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['external_diffs_storage_path'] = "/mnt/storage/external-diffs" - ``` + ```ruby + gitlab_rails['external_diffs_storage_path'] = "/mnt/storage/external-diffs" + ``` 1. Save the file and [reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. @@ -41,21 +41,21 @@ To enable external storage of merge request diffs, follow the instructions below 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - external_diffs: - enabled: true - ``` + ```yaml + external_diffs: + enabled: true + ``` 1. _The external diffs will be stored in `/home/git/gitlab/shared/external-diffs`._ To change the path, for example, to `/mnt/storage/external-diffs`, edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - external_diffs: - enabled: true - storage_path: /mnt/storage/external-diffs - ``` + ```yaml + external_diffs: + enabled: true + storage_path: /mnt/storage/external-diffs + ``` 1. Save the file and [restart GitLab](restart_gitlab.md#installations-from-source) for the changes to take effect. @@ -101,28 +101,28 @@ The connection settings match those provided by [Fog](https://github.com/fog), a 1. Edit `/etc/gitlab/gitlab.rb` and add the following lines by replacing with the values you want: - ```ruby - gitlab_rails['external_diffs_enabled'] = true - gitlab_rails['external_diffs_object_store_enabled'] = true - gitlab_rails['external_diffs_object_store_remote_directory'] = "external-diffs" - gitlab_rails['external_diffs_object_store_connection'] = { - 'provider' => 'AWS', - 'region' => 'eu-central-1', - 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', - 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' - } - ``` - - Note that, if you are using AWS IAM profiles, be sure to omit the - AWS access key and secret access key/value pairs. For example: - - ```ruby - gitlab_rails['external_diffs_object_store_connection'] = { - 'provider' => 'AWS', - 'region' => 'eu-central-1', - 'use_iam_profile' => true - } - ``` + ```ruby + gitlab_rails['external_diffs_enabled'] = true + gitlab_rails['external_diffs_object_store_enabled'] = true + gitlab_rails['external_diffs_object_store_remote_directory'] = "external-diffs" + gitlab_rails['external_diffs_object_store_connection'] = { + 'provider' => 'AWS', + 'region' => 'eu-central-1', + 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', + 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' + } + ``` + + Note that, if you are using AWS IAM profiles, be sure to omit the + AWS access key and secret access key/value pairs. For example: + + ```ruby + gitlab_rails['external_diffs_object_store_connection'] = { + 'provider' => 'AWS', + 'region' => 'eu-central-1', + 'use_iam_profile' => true + } + ``` 1. Save the file and [reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. @@ -131,18 +131,18 @@ The connection settings match those provided by [Fog](https://github.com/fog), a 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - external_diffs: - enabled: true - object_store: - enabled: true - remote_directory: "external-diffs" # The bucket name - connection: - provider: AWS # Only AWS supported at the moment - aws_access_key_id: AWS_ACCESS_KEY_ID - aws_secret_access_key: AWS_SECRET_ACCESS_KEY - region: eu-central-1 - ``` + ```yaml + external_diffs: + enabled: true + object_store: + enabled: true + remote_directory: "external-diffs" # The bucket name + connection: + provider: AWS # Only AWS supported at the moment + aws_access_key_id: AWS_ACCESS_KEY_ID + aws_secret_access_key: AWS_SECRET_ACCESS_KEY + region: eu-central-1 + ``` 1. Save the file and [restart GitLab](restart_gitlab.md#installations-from-source) for the changes to take effect. @@ -157,11 +157,11 @@ To enable this feature, perform the following steps: **In Omnibus installations:** -1. Edit `/etc/gitlab/gitlab.rb` and add the following line: +1. Edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['external_diffs_when'] = 'outdated' - ``` + ```ruby + gitlab_rails['external_diffs_when'] = 'outdated' + ``` 1. Save the file and [reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. @@ -170,11 +170,11 @@ To enable this feature, perform the following steps: 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - external_diffs: - enabled: true - when: outdated - ``` + ```yaml + external_diffs: + enabled: true + when: outdated + ``` 1. Save the file and [restart GitLab](restart_gitlab.md#installations-from-source) for the changes to take effect. diff --git a/doc/administration/packages.md b/doc/administration/packages.md index 1da8de12188..c0f8777a8c0 100644 --- a/doc/administration/packages.md +++ b/doc/administration/packages.md @@ -28,9 +28,9 @@ To enable the Packages feature: 1. Edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['packages_enabled'] = true - ``` + ```ruby + gitlab_rails['packages_enabled'] = true + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -39,10 +39,11 @@ To enable the Packages feature: 1. After the installation is complete, you will have to configure the `packages` section in `config/gitlab.yml`. Set to `true` to enable it: - ```yaml - packages: - enabled: true - ``` + ```yaml + packages: + enabled: true + ``` + 1. [Restart GitLab] for the changes to take effect. ## Changing the storage path @@ -61,9 +62,9 @@ To change the local storage path: 1. Edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['packages_storage_path'] = "/mnt/packages" - ``` + ```ruby + gitlab_rails['packages_storage_path'] = "/mnt/packages" + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -71,11 +72,12 @@ To change the local storage path: 1. Edit the `packages` section in `config/gitlab.yml`: - ```yaml - packages: - enabled: true - storage_path: shared/packages - ``` + ```yaml + packages: + enabled: true + storage_path: shared/packages + ``` + 1. [Restart GitLab] for the changes to take effect. ### Using object storage @@ -88,31 +90,31 @@ upload packages: 1. Edit `/etc/gitlab/gitlab.rb` and add the following lines (uncomment where necessary): - ```ruby - gitlab_rails['packages_enabled'] = true - gitlab_rails['packages_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/packages" - gitlab_rails['packages_object_store_enabled'] = true - gitlab_rails['packages_object_store_remote_directory'] = "packages" # The bucket name. - gitlab_rails['packages_object_store_direct_upload'] = false # Use Object Storage directly for uploads instead of background uploads if enabled (Default: false). - gitlab_rails['packages_object_store_background_upload'] = true # Temporary option to limit automatic upload (Default: true). - gitlab_rails['packages_object_store_proxy_download'] = false # Passthrough all downloads via GitLab instead of using Redirects to Object Storage. - gitlab_rails['packages_object_store_connection'] = { - ## - ## If the provider is AWS S3, uncomment the following - ## - #'provider' => 'AWS', - #'region' => 'eu-west-1', - #'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', - #'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY', - ## - ## If the provider is other than AWS (an S3-compatible one), uncomment the following - ## - #'host' => 's3.amazonaws.com', - #'aws_signature_version' => 4 # For creation of signed URLs. Set to 2 if provider does not support v4. - #'endpoint' => 'https://s3.amazonaws.com' # Useful for S3-compliant services such as DigitalOcean Spaces. - #'path_style' => false # If true, use 'host/bucket_name/object' instead of 'bucket_name.host/object'. - } - ``` + ```ruby + gitlab_rails['packages_enabled'] = true + gitlab_rails['packages_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/packages" + gitlab_rails['packages_object_store_enabled'] = true + gitlab_rails['packages_object_store_remote_directory'] = "packages" # The bucket name. + gitlab_rails['packages_object_store_direct_upload'] = false # Use Object Storage directly for uploads instead of background uploads if enabled (Default: false). + gitlab_rails['packages_object_store_background_upload'] = true # Temporary option to limit automatic upload (Default: true). + gitlab_rails['packages_object_store_proxy_download'] = false # Passthrough all downloads via GitLab instead of using Redirects to Object Storage. + gitlab_rails['packages_object_store_connection'] = { + ## + ## If the provider is AWS S3, uncomment the following + ## + #'provider' => 'AWS', + #'region' => 'eu-west-1', + #'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', + #'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY', + ## + ## If the provider is other than AWS (an S3-compatible one), uncomment the following + ## + #'host' => 's3.amazonaws.com', + #'aws_signature_version' => 4 # For creation of signed URLs. Set to 2 if provider does not support v4. + #'endpoint' => 'https://s3.amazonaws.com' # Useful for S3-compliant services such as DigitalOcean Spaces. + #'path_style' => false # If true, use 'host/bucket_name/object' instead of 'bucket_name.host/object'. + } + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -120,35 +122,35 @@ upload packages: 1. Edit the `packages` section in `config/gitlab.yml` (uncomment where necessary): - ```yaml - packages: - enabled: true - ## - ## The location where build packages are stored (default: shared/packages). - ## - #storage_path: shared/packages - object_store: - enabled: false - remote_directory: packages # The bucket name. - #direct_upload: false # Use Object Storage directly for uploads instead of background uploads if enabled (Default: false). - #background_upload: true # Temporary option to limit automatic upload (Default: true). - #proxy_download: false # Passthrough all downloads via GitLab instead of using Redirects to Object Storage. - connection: - ## - ## If the provider is AWS S3, uncomment the following - ## - #provider: AWS - #region: us-east-1 - #aws_access_key_id: AWS_ACCESS_KEY_ID - #aws_secret_access_key: AWS_SECRET_ACCESS_KEY - ## - ## If the provider is other than AWS (an S3-compatible one), uncomment the following - ## - #host: 's3.amazonaws.com' # default: s3.amazonaws.com. - #aws_signature_version: 4 # For creation of signed URLs. Set to 2 if provider does not support v4. - #endpoint: 'https://s3.amazonaws.com' # Useful for S3-compliant services such as DigitalOcean Spaces. - #path_style: false # If true, use 'host/bucket_name/object' instead of 'bucket_name.host/object'. - ``` + ```yaml + packages: + enabled: true + ## + ## The location where build packages are stored (default: shared/packages). + ## + #storage_path: shared/packages + object_store: + enabled: false + remote_directory: packages # The bucket name. + #direct_upload: false # Use Object Storage directly for uploads instead of background uploads if enabled (Default: false). + #background_upload: true # Temporary option to limit automatic upload (Default: true). + #proxy_download: false # Passthrough all downloads via GitLab instead of using Redirects to Object Storage. + connection: + ## + ## If the provider is AWS S3, uncomment the following + ## + #provider: AWS + #region: us-east-1 + #aws_access_key_id: AWS_ACCESS_KEY_ID + #aws_secret_access_key: AWS_SECRET_ACCESS_KEY + ## + ## If the provider is other than AWS (an S3-compatible one), uncomment the following + ## + #host: 's3.amazonaws.com' # default: s3.amazonaws.com. + #aws_signature_version: 4 # For creation of signed URLs. Set to 2 if provider does not support v4. + #endpoint: 'https://s3.amazonaws.com' # Useful for S3-compliant services such as DigitalOcean Spaces. + #path_style: false # If true, use 'host/bucket_name/object' instead of 'bucket_name.host/object'. + ``` 1. [Restart GitLab] for the changes to take effect. diff --git a/doc/administration/pseudonymizer.md b/doc/administration/pseudonymizer.md index 3278409d4b5..78b2751da13 100644 --- a/doc/administration/pseudonymizer.md +++ b/doc/administration/pseudonymizer.md @@ -31,27 +31,27 @@ To configure the pseudonymizer, you need to: 1. Edit `/etc/gitlab/gitlab.rb` and add the following lines by replacing with the values you want: - ```ruby - gitlab_rails['pseudonymizer_manifest'] = 'config/pseudonymizer.yml' - gitlab_rails['pseudonymizer_upload_remote_directory'] = 'gitlab-elt' # bucket name - gitlab_rails['pseudonymizer_upload_connection'] = { - 'provider' => 'AWS', - 'region' => 'eu-central-1', - 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', - 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' - } - ``` - - NOTE: **Note:** - If you are using AWS IAM profiles, be sure to omit the AWS access key and secret access key/value pairs. - - ```ruby - gitlab_rails['pseudonymizer_upload_connection'] = { - 'provider' => 'AWS', - 'region' => 'eu-central-1', - 'use_iam_profile' => true - } - ``` + ```ruby + gitlab_rails['pseudonymizer_manifest'] = 'config/pseudonymizer.yml' + gitlab_rails['pseudonymizer_upload_remote_directory'] = 'gitlab-elt' # bucket name + gitlab_rails['pseudonymizer_upload_connection'] = { + 'provider' => 'AWS', + 'region' => 'eu-central-1', + 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', + 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' + } + ``` + + NOTE: **Note:** + If you are using AWS IAM profiles, be sure to omit the AWS access key and secret access key/value pairs. + + ```ruby + gitlab_rails['pseudonymizer_upload_connection'] = { + 'provider' => 'AWS', + 'region' => 'eu-central-1', + 'use_iam_profile' => true + } + ``` 1. Save the file and [reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. @@ -63,17 +63,17 @@ To configure the pseudonymizer, you need to: 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - pseudonymizer: - manifest: config/pseudonymizer.yml - upload: - remote_directory: 'gitlab-elt' # bucket name - connection: - provider: AWS - aws_access_key_id: AWS_ACCESS_KEY_ID - aws_secret_access_key: AWS_SECRET_ACCESS_KEY - region: eu-central-1 - ``` + ```yaml + pseudonymizer: + manifest: config/pseudonymizer.yml + upload: + remote_directory: 'gitlab-elt' # bucket name + connection: + provider: AWS + aws_access_key_id: AWS_ACCESS_KEY_ID + aws_secret_access_key: AWS_SECRET_ACCESS_KEY + region: eu-central-1 + ``` 1. Save the file and [restart GitLab](restart_gitlab.md#installations-from-source) for the changes to take effect. diff --git a/doc/administration/reply_by_email_postfix_setup.md b/doc/administration/reply_by_email_postfix_setup.md index d57fc67c83e..406f7e8a034 100644 --- a/doc/administration/reply_by_email_postfix_setup.md +++ b/doc/administration/reply_by_email_postfix_setup.md @@ -14,109 +14,109 @@ The instructions make the assumption that you will be using the email address `i 1. Install the `postfix` package if it is not installed already: - ```sh - sudo apt-get install postfix - ``` + ```sh + sudo apt-get install postfix + ``` - When asked about the environment, select 'Internet Site'. When asked to confirm the hostname, make sure it matches `gitlab.example.com`. + When asked about the environment, select 'Internet Site'. When asked to confirm the hostname, make sure it matches gitlab.example.com`. 1. Install the `mailutils` package. - ```sh - sudo apt-get install mailutils - ``` + ```sh + sudo apt-get install mailutils + ``` ## Create user 1. Create a user for incoming email. - ```sh - sudo useradd -m -s /bin/bash incoming - ``` + ```sh + sudo useradd -m -s /bin/bash incoming + ``` 1. Set a password for this user. - ```sh - sudo passwd incoming - ``` + ```sh + sudo passwd incoming + ``` - Be sure not to forget this, you'll need it later. + Be sure not to forget this, you'll need it later. ## Test the out-of-the-box setup 1. Connect to the local SMTP server: - ```sh - telnet localhost 25 - ``` + ```sh + telnet localhost 25 + ``` - You should see a prompt like this: + You should see a prompt like this: - ```sh - Trying 127.0.0.1... - Connected to localhost. - Escape character is '^]'. - 220 gitlab.example.com ESMTP Postfix (Ubuntu) - ``` + ```sh + Trying 127.0.0.1... + Connected to localhost. + Escape character is '^]'. + 220 gitlab.example.com ESMTP Postfix (Ubuntu) + ``` - If you get a `Connection refused` error instead, verify that `postfix` is running: + If you get a `Connection refused` error instead, verify that `postfix` is running: - ```sh - sudo postfix status - ``` + ```sh + sudo postfix status + ``` - If it is not, start it: + If it is not, start it: - ```sh - sudo postfix start - ``` + ```sh + sudo postfix start + ``` 1. Send the new `incoming` user a dummy email to test SMTP, by entering the following into the SMTP prompt: - ``` - ehlo localhost - mail from: root@localhost - rcpt to: incoming@localhost - data - Subject: Re: Some issue + ``` + ehlo localhost + mail from: root@localhost + rcpt to: incoming@localhost + data + Subject: Re: Some issue - Sounds good! - . - quit - ``` + Sounds good! + . + quit + ``` - _**Note:** The `.` is a literal period on its own line._ + _**Note:** The `.` is a literal period on its own line._ - _**Note:** If you receive an error after entering `rcpt to: incoming@localhost` - then your Postfix `my_network` configuration is not correct. The error will - say 'Temporary lookup failure'. See - [Configure Postfix to receive email from the Internet](#configure-postfix-to-receive-email-from-the-internet)._ + _**Note:** If you receive an error after entering `rcpt to: incoming@localhost` + then your Postfix `my_network` configuration is not correct. The error will + say 'Temporary lookup failure'. See + [Configure Postfix to receive email from the Internet](#configure-postfix-to-receive-email-from-the-internet)._ 1. Check if the `incoming` user received the email: - ```sh - su - incoming - mail - ``` + ```sh + su - incoming + mail + ``` - You should see output like this: + You should see output like this: - ``` - "/var/mail/incoming": 1 message 1 unread - >U 1 root@localhost 59/2842 Re: Some issue - ``` + ``` + "/var/mail/incoming": 1 message 1 unread + >U 1 root@localhost 59/2842 Re: Some issue + ``` - Quit the mail app: + Quit the mail app: - ```sh - q - ``` + ```sh + q + ``` 1. Log out of the `incoming` account and go back to being `root`: - ```sh - logout - ``` + ```sh + logout + ``` ## Configure Postfix to use Maildir-style mailboxes @@ -124,208 +124,212 @@ Courier, which we will install later to add IMAP authentication, requires mailbo 1. Configure Postfix to use Maildir-style mailboxes: - ```sh - sudo postconf -e "home_mailbox = Maildir/" - ``` + ```sh + sudo postconf -e "home_mailbox = Maildir/" + ``` 1. Restart Postfix: - ```sh - sudo /etc/init.d/postfix restart - ``` + ```sh + sudo /etc/init.d/postfix restart + ``` 1. Test the new setup: - 1. Follow steps 1 and 2 of _[Test the out-of-the-box setup](#test-the-out-of-the-box-setup)_. - 1. Check if the `incoming` user received the email: + 1. Follow steps 1 and 2 of _[Test the out-of-the-box setup](#test-the-out-of-the-box-setup)_. + 1. Check if the `incoming` user received the email: - ```sh - su - incoming - MAIL=/home/incoming/Maildir - mail - ``` + ```sh + su - incoming + MAIL=/home/incoming/Maildir + mail + ``` - You should see output like this: + You should see output like this: - ``` - "/home/incoming/Maildir": 1 message 1 unread - >U 1 root@localhost 59/2842 Re: Some issue - ``` + ``` + "/home/incoming/Maildir": 1 message 1 unread + >U 1 root@localhost 59/2842 Re: Some issue + ``` - Quit the mail app: + Quit the mail app: - ```sh - q - ``` + ```sh + q + ``` - _**Note:** If `mail` returns an error `Maildir: Is a directory` then your - version of `mail` doesn't support Maildir style mailboxes. Install - `heirloom-mailx` by running `sudo apt-get install heirloom-mailx`. Then, - try the above steps again, substituting `heirloom-mailx` for the `mail` - command._ + _**Note:** If `mail` returns an error `Maildir: Is a directory` then your + version of `mail` doesn't support Maildir style mailboxes. Install + `heirloom-mailx` by running `sudo apt-get install heirloom-mailx`. Then, + try the above steps again, substituting `heirloom-mailx` for the `mail` + command._ 1. Log out of the `incoming` account and go back to being `root`: - ```sh - logout - ``` + ```sh + logout + ``` ## Install the Courier IMAP server 1. Install the `courier-imap` package: - ```sh - sudo apt-get install courier-imap - ``` + ```sh + sudo apt-get install courier-imap + ``` - And start `imapd`: - ```sh - imapd start - ``` + And start `imapd`: + + ```sh + imapd start + ``` 1. The courier-authdaemon isn't started after installation. Without it, imap authentication will fail: - ```sh - sudo service courier-authdaemon start - ``` - You can also configure courier-authdaemon to start on boot: - ```sh - sudo systemctl enable courier-authdaemon - ``` + + ```sh + sudo service courier-authdaemon start + ``` + + You can also configure courier-authdaemon to start on boot: + + ```sh + sudo systemctl enable courier-authdaemon + ``` ## Configure Postfix to receive email from the internet 1. Let Postfix know about the domains that it should consider local: - ```sh - sudo postconf -e "mydestination = gitlab.example.com, localhost.localdomain, localhost" - ``` + ```sh + sudo postconf -e "mydestination = gitlab.example.com, localhost.localdomain, localhost" + ``` 1. Let Postfix know about the IPs that it should consider part of the LAN: - We'll assume `192.168.1.0/24` is your local LAN. You can safely skip this step if you don't have other machines in the same local network. + We'll assume `192.168.1.0/24` is your local LAN. You can safely skip this step if you don't have other machines in the same local network. - ```sh - sudo postconf -e "mynetworks = 127.0.0.0/8, 192.168.1.0/24" - ``` + ```sh + sudo postconf -e "mynetworks = 127.0.0.0/8, 192.168.1.0/24" + ``` 1. Configure Postfix to receive mail on all interfaces, which includes the internet: - ```sh - sudo postconf -e "inet_interfaces = all" - ``` + ```sh + sudo postconf -e "inet_interfaces = all" + ``` 1. Configure Postfix to use the `+` delimiter for sub-addressing: - ```sh - sudo postconf -e "recipient_delimiter = +" - ``` + ```sh + sudo postconf -e "recipient_delimiter = +" + ``` 1. Restart Postfix: - ```sh - sudo service postfix restart - ``` + ```sh + sudo service postfix restart + ``` ## Test the final setup 1. Test SMTP under the new setup: - 1. Connect to the SMTP server: + 1. Connect to the SMTP server: - ```sh - telnet gitlab.example.com 25 - ``` + ```sh + telnet gitlab.example.com 25 + ``` - You should see a prompt like this: + You should see a prompt like this: - ```sh - Trying 123.123.123.123... - Connected to gitlab.example.com. - Escape character is '^]'. - 220 gitlab.example.com ESMTP Postfix (Ubuntu) - ``` + ```sh + Trying 123.123.123.123... + Connected to gitlab.example.com. + Escape character is '^]'. + 220 gitlab.example.com ESMTP Postfix (Ubuntu) + ``` - If you get a `Connection refused` error instead, make sure your firewall is set up to allow inbound traffic on port 25. + If you get a `Connection refused` error instead, make sure your firewall is set up to allow inbound traffic on port 25. - 1. Send the `incoming` user a dummy email to test SMTP, by entering the following into the SMTP prompt: + 1. Send the `incoming` user a dummy email to test SMTP, by entering the following into the SMTP prompt: - ``` - ehlo gitlab.example.com - mail from: root@gitlab.example.com - rcpt to: incoming@gitlab.example.com - data - Subject: Re: Some issue + ``` + ehlo gitlab.example.com + mail from: root@gitlab.example.com + rcpt to: incoming@gitlab.example.com + data + Subject: Re: Some issue - Sounds good! - . - quit - ``` + Sounds good! + . + quit + ``` - (Note: The `.` is a literal period on its own line) + (Note: The `.` is a literal period on its own line) - 1. Check if the `incoming` user received the email: + 1. Check if the `incoming` user received the email: - ```sh - su - incoming - MAIL=/home/incoming/Maildir - mail - ``` + ```sh + su - incoming + MAIL=/home/incoming/Maildir + mail + ``` - You should see output like this: + You should see output like this: - ``` - "/home/incoming/Maildir": 1 message 1 unread - >U 1 root@gitlab.example.com 59/2842 Re: Some issue - ``` + ``` + "/home/incoming/Maildir": 1 message 1 unread + >U 1 root@gitlab.example.com 59/2842 Re: Some issue + ``` - Quit the mail app: + Quit the mail app: - ```sh - q - ``` + ```sh + q + ``` - 1. Log out of the `incoming` account and go back to being `root`: + 1. Log out of the `incoming` account and go back to being `root`: - ```sh - logout - ``` + ```sh + logout + ``` 1. Test IMAP under the new setup: - 1. Connect to the IMAP server: + 1. Connect to the IMAP server: - ```sh - telnet gitlab.example.com 143 - ``` + ```sh + telnet gitlab.example.com 143 + ``` - You should see a prompt like this: + You should see a prompt like this: - ```sh - Trying 123.123.123.123... - Connected to mail.example.gitlab.com. - Escape character is '^]'. - - OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION] Courier-IMAP ready. Copyright 1998-2011 Double Precision, Inc. See COPYING for distribution information. - ``` + ```sh + Trying 123.123.123.123... + Connected to mail.example.gitlab.com. + Escape character is '^]'. + - OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION] Courier-IMAP ready. Copyright 1998-2011 Double Precision, Inc. See COPYING for distribution information. + ``` - 1. Sign in as the `incoming` user to test IMAP, by entering the following into the IMAP prompt: + 1. Sign in as the `incoming` user to test IMAP, by entering the following into the IMAP prompt: - ``` - a login incoming PASSWORD - ``` + ``` + a login incoming PASSWORD + ``` - Replace PASSWORD with the password you set on the `incoming` user earlier. + Replace PASSWORD with the password you set on the `incoming` user earlier. - You should see output like this: + You should see output like this: - ``` - a OK LOGIN Ok. - ``` + ``` + a OK LOGIN Ok. + ``` - 1. Disconnect from the IMAP server: + 1. Disconnect from the IMAP server: - ```sh - a logout - ``` + ```sh + a logout + ``` ## Done! diff --git a/doc/administration/repository_storage_paths.md b/doc/administration/repository_storage_paths.md index 4aafc06cfdc..3de860f9240 100644 --- a/doc/administration/repository_storage_paths.md +++ b/doc/administration/repository_storage_paths.md @@ -68,18 +68,18 @@ NOTE: **Note:** This example uses NFS and CephFS. We do not recommend using EFS 1. Edit `gitlab.yml` and add the storage paths: - ```yaml - repositories: - # Paths where repositories can be stored. Give the canonicalized absolute pathname. - # NOTE: REPOS PATHS MUST NOT CONTAIN ANY SYMLINK!!! - storages: # You must have at least a 'default' storage path. - default: - path: /home/git/repositories - nfs: - path: /mnt/nfs/repositories - cephfs: - path: /mnt/cephfs/repositories - ``` + ```yaml + repositories: + # Paths where repositories can be stored. Give the canonicalized absolute pathname. + # NOTE: REPOS PATHS MUST NOT CONTAIN ANY SYMLINK!!! + storages: # You must have at least a 'default' storage path. + default: + path: /home/git/repositories + nfs: + path: /mnt/nfs/repositories + cephfs: + path: /mnt/cephfs/repositories + ``` 1. [Restart GitLab][restart-gitlab] for the changes to take effect. @@ -97,16 +97,16 @@ working, you can remove the `repos_path` line. 1. Edit `/etc/gitlab/gitlab.rb` by appending the rest of the paths to the default one: - ```ruby - git_data_dirs({ - "default" => { "path" => "/var/opt/gitlab/git-data" }, - "nfs" => { "path" => "/mnt/nfs/git-data" }, - "cephfs" => { "path" => "/mnt/cephfs/git-data" } - }) - ``` + ```ruby + git_data_dirs({ + "default" => { "path" => "/var/opt/gitlab/git-data" }, + "nfs" => { "path" => "/mnt/nfs/git-data" }, + "cephfs" => { "path" => "/mnt/cephfs/git-data" } + }) + ``` - Note that Omnibus stores the repositories in a `repositories` subdirectory - of the `git-data` directory. + Note that Omnibus stores the repositories in a `repositories` subdirectory + of the `git-data` directory. ## Choose where new project repositories will be stored diff --git a/doc/administration/uploads.md b/doc/administration/uploads.md index c6103a28204..c6529812ec3 100644 --- a/doc/administration/uploads.md +++ b/doc/administration/uploads.md @@ -23,10 +23,10 @@ _The uploads are stored by default in `/var/opt/gitlab/gitlab-rails/uploads`._ 1. To change the storage path for example to `/mnt/storage/uploads`, edit `/etc/gitlab/gitlab.rb` and add the following line: - ```ruby - gitlab_rails['uploads_storage_path'] = "/mnt/storage/" - gitlab_rails['uploads_base_dir'] = "uploads" - ``` + ```ruby + gitlab_rails['uploads_storage_path'] = "/mnt/storage/" + gitlab_rails['uploads_base_dir'] = "uploads" + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. @@ -40,11 +40,11 @@ _The uploads are stored by default in 1. To change the storage path for example to `/mnt/storage/uploads`, edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - uploads: - storage_path: /mnt/storage - base_dir: uploads - ``` + ```yaml + uploads: + storage_path: /mnt/storage + base_dir: uploads + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. @@ -97,27 +97,27 @@ _The uploads are stored by default in 1. Edit `/etc/gitlab/gitlab.rb` and add the following lines by replacing with the values you want: - ```ruby - gitlab_rails['uploads_object_store_enabled'] = true - gitlab_rails['uploads_object_store_remote_directory'] = "uploads" - gitlab_rails['uploads_object_store_connection'] = { - 'provider' => 'AWS', - 'region' => 'eu-central-1', - 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', - 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' - } - ``` - - >**Note:** - If you are using AWS IAM profiles, be sure to omit the AWS access key and secret access key/value pairs. - - ```ruby - gitlab_rails['uploads_object_store_connection'] = { - 'provider' => 'AWS', - 'region' => 'eu-central-1', - 'use_iam_profile' => true - } - ``` + ```ruby + gitlab_rails['uploads_object_store_enabled'] = true + gitlab_rails['uploads_object_store_remote_directory'] = "uploads" + gitlab_rails['uploads_object_store_connection'] = { + 'provider' => 'AWS', + 'region' => 'eu-central-1', + 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', + 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' + } + ``` + + >**Note:** + >If you are using AWS IAM profiles, be sure to omit the AWS access key and secret access key/value pairs. + + ```ruby + gitlab_rails['uploads_object_store_connection'] = { + 'provider' => 'AWS', + 'region' => 'eu-central-1', + 'use_iam_profile' => true + } + ``` 1. Save the file and [reconfigure GitLab][] for the changes to take effect. 1. Migrate any existing local uploads to the object storage using [`gitlab:uploads:migrate` rake task](raketasks/uploads/migrate.md). @@ -132,17 +132,17 @@ _The uploads are stored by default in 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: - ```yaml - uploads: - object_store: - enabled: true - remote_directory: "uploads" # The bucket name - connection: - provider: AWS # Only AWS supported at the moment - aws_access_key_id: AWS_ACESS_KEY_ID - aws_secret_access_key: AWS_SECRET_ACCESS_KEY - region: eu-central-1 - ``` + ```yaml + uploads: + object_store: + enabled: true + remote_directory: "uploads" # The bucket name + connection: + provider: AWS # Only AWS supported at the moment + aws_access_key_id: AWS_ACESS_KEY_ID + aws_secret_access_key: AWS_SECRET_ACCESS_KEY + region: eu-central-1 + ``` 1. Save the file and [restart GitLab][] for the changes to take effect. 1. Migrate any existing local uploads to the object storage using [`gitlab:uploads:migrate` rake task](raketasks/uploads/migrate.md). diff --git a/doc/api/README.md b/doc/api/README.md index 6284bc82e27..3ded230370c 100644 --- a/doc/api/README.md +++ b/doc/api/README.md @@ -311,9 +311,9 @@ By default, impersonation is enabled. To disable impersonation: 1. Edit `/etc/gitlab/gitlab.rb`: - ```ruby - gitlab_rails['impersonation_enabled'] = false - ``` + ```ruby + gitlab_rails['impersonation_enabled'] = false + ``` 1. Save the file and [reconfigure](../administration/restart_gitlab.md#omnibus-gitlab-reconfigure) GitLab for the changes to take effect. @@ -326,10 +326,10 @@ To re-enable impersonation, remove this configuration and reconfigure GitLab. 1. Edit `config/gitlab.yml`: - ```yaml - gitlab: - impersonation_enabled: false - ``` + ```yaml + gitlab: + impersonation_enabled: false + ``` 1. Save the file and [restart](../administration/restart_gitlab.md#installations-from-source) GitLab for the changes to take effect. diff --git a/doc/api/lint.md b/doc/api/lint.md index 71c09d35b8c..b9b49f3df27 100644 --- a/doc/api/lint.md +++ b/doc/api/lint.md @@ -22,30 +22,30 @@ Example responses: - Valid content: - ```json - { - "status": "valid", - "errors": [] - } - ``` + ```json + { + "status": "valid", + "errors": [] + } + ``` - Invalid content: - ```json - { - "status": "invalid", - "errors": [ - "variables config should be a hash of key value pairs" - ] - } - ``` + ```json + { + "status": "invalid", + "errors": [ + "variables config should be a hash of key value pairs" + ] + } + ``` - Without the content attribute: - ```json - { - "error": "content is missing" - } - ``` + ```json + { + "error": "content is missing" + } + ``` [ce-5953]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/5953 diff --git a/doc/api/repositories.md b/doc/api/repositories.md index 681dc72c934..ffae5c17310 100644 --- a/doc/api/repositories.md +++ b/doc/api/repositories.md @@ -121,9 +121,9 @@ Parameters: - `id` (required) - The ID or [URL-encoded path of the project](README.md#namespaced-path-encoding) owned by the authenticated user - `sha` (optional) - The commit SHA to download. A tag, branch reference, or SHA can be used. This defaults to the tip of the default branch if not specified. For example: - ```sh - curl --header "PRIVATE-TOKEN: <your_access_token>" https://gitlab.com/api/v4/projects/<project_id>/repository/archive?sha=<commit_sha> - ``` +```sh +curl --header "PRIVATE-TOKEN: <your_access_token>" https://gitlab.com/api/v4/projects/<project_id>/repository/archive?sha=<commit_sha> +``` ## Compare branches, tags or commits diff --git a/doc/api/runners.md b/doc/api/runners.md index 1318b9ca828..e6962d17a98 100644 --- a/doc/api/runners.md +++ b/doc/api/runners.md @@ -20,10 +20,10 @@ Here's an example of how the two tokens are used in Runner registration: 1. You use that authentication token and add it to the [Runner's configuration file](https://docs.gitlab.com/runner/commands/#configuration-file): - ```toml - [[runners]] - token = "<authentication_token>" - ``` + ```toml + [[runners]] + token = "<authentication_token>" + ``` GitLab and Runner are then connected. diff --git a/doc/ci/git_submodules.md b/doc/ci/git_submodules.md index 551044dd76f..1354a26d6e2 100644 --- a/doc/ci/git_submodules.md +++ b/doc/ci/git_submodules.md @@ -79,14 +79,14 @@ correctly with your CI jobs: 1. If you are using an older version of `gitlab-runner`, then use `git submodule sync/update` in `before_script`: - ```yaml - before_script: - - git submodule sync --recursive - - git submodule update --init --recursive - ``` - - `--recursive` should be used in either both or none (`sync/update`) depending on - whether you have recursive submodules. + ```yaml + before_script: + - git submodule sync --recursive + - git submodule update --init --recursive + ``` + + `--recursive` should be used in either both or none (`sync/update`) depending on + whether you have recursive submodules. The rationale to set the `sync` and `update` in `before_script` is because of the way Git submodules work. On a fresh Runner workspace, Git will set the diff --git a/doc/development/architecture.md b/doc/development/architecture.md index 8319603fea2..b645a72567c 100644 --- a/doc/development/architecture.md +++ b/doc/development/architecture.md @@ -484,9 +484,11 @@ When making a request to an HTTP Endpoint (think `/users/sign_in`) the request w Below we describe the different pathing that HTTP vs. SSH Git requests will take. There is some overlap with the Web Request Cycle but also some differences. ### Web Request (80/443) + TODO ### SSH Request (22) + TODO ## System Layout @@ -505,7 +507,9 @@ To summarize here's the [directory structure of the `git` user home directory](. ### Processes - ps aux | grep '^git' +```sh +ps aux | grep '^git' +``` GitLab has several components to operate. As a system user (i.e. any user that is not the `git` user) it requires a persistent database (MySQL/PostreSQL) and redis database. It also uses Apache httpd or Nginx to proxypass Unicorn. As the `git` user it starts Sidekiq and Unicorn (a simple ruby HTTP server running on port `8080` by default). Under the GitLab user there are normally 4 processes: `unicorn_rails master` (1 process), `unicorn_rails worker` (2 processes), `sidekiq` (1 process). diff --git a/doc/development/ee_features.md b/doc/development/ee_features.md index dc17b59a9a0..7131b717353 100644 --- a/doc/development/ee_features.md +++ b/doc/development/ee_features.md @@ -182,52 +182,52 @@ There are a few gotchas with it: pattern](https://en.wikipedia.org/wiki/Template_method_pattern). For example, given this base: - ```ruby - class Base - def execute - return unless enabled? + ```ruby + class Base + def execute + return unless enabled? - # ... - # ... - end + # ... + # ... end - ``` + end + ``` - Instead of just overriding `Base#execute`, we should update it and extract - the behaviour into another method: + Instead of just overriding `Base#execute`, we should update it and extract + the behaviour into another method: - ```ruby - class Base - def execute - return unless enabled? + ```ruby + class Base + def execute + return unless enabled? - do_something - end + do_something + end - private + private - def do_something - # ... - # ... - end + def do_something + # ... + # ... end - ``` + end + ``` - Then we're free to override that `do_something` without worrying about the - guards: + Then we're free to override that `do_something` without worrying about the + guards: - ```ruby - module EE::Base - extend ::Gitlab::Utils::Override + ```ruby + module EE::Base + extend ::Gitlab::Utils::Override - override :do_something - def do_something - # Follow the above pattern to call super and extend it - end + override :do_something + def do_something + # Follow the above pattern to call super and extend it end - ``` + end + ``` - This would require updating CE first, or make sure this is back ported to CE. + This would require updating CE first, or make sure this is back ported to CE. When prepending, place them in the `ee/` specific sub-directory, and wrap class or module in `module EE` to avoid naming conflicts. @@ -1038,8 +1038,8 @@ to avoid conflicts during CE to EE merge. Until the work completed to merge the ce and ee codebases, which is tracked on [epic &802](https://gitlab.com/groups/gitlab-org/-/epics/802), there exists times in which some changes for EE require specific changes to the CE code base. Examples of backports include the following: -* Features intended or originally built for EE that are later decided to move to CE -* Sometimes some code in CE may impact the EE feature +- Features intended or originally built for EE that are later decided to move to CE +- Sometimes some code in CE may impact the EE feature Here is a workflow to make sure those changes end up backported safely into CE too. diff --git a/doc/development/emails.md b/doc/development/emails.md index 1fd4139c91e..e6af075a282 100644 --- a/doc/development/emails.md +++ b/doc/development/emails.md @@ -26,51 +26,51 @@ See the [Rails guides] for more info. feature and fill in the details for your specific IMAP server and email account: - Configuration for Gmail / Google Apps, assumes mailbox gitlab-incoming@gmail.com - - ```yaml - incoming_email: - enabled: true - - # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to. - # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`). - address: "gitlab-incoming+%{key}@gmail.com" - - # Email account username - # With third party providers, this is usually the full email address. - # With self-hosted email servers, this is usually the user part of the email address. - user: "gitlab-incoming@gmail.com" - # Email account password - password: "[REDACTED]" - - # IMAP server host - host: "imap.gmail.com" - # IMAP server port - port: 993 - # Whether the IMAP server uses SSL - ssl: true - # Whether the IMAP server uses StartTLS - start_tls: false - - # The mailbox where incoming mail will end up. Usually "inbox". - mailbox: "inbox" - # The IDLE command timeout. - idle_timeout: 60 - ``` - - As mentioned, the part after `+` is ignored, and this will end up in the mailbox for `gitlab-incoming@gmail.com`. + Configuration for Gmail / Google Apps, assumes mailbox `gitlab-incoming@gmail.com`: + + ```yaml + incoming_email: + enabled: true + + # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to. + # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`). + address: "gitlab-incoming+%{key}@gmail.com" + + # Email account username + # With third party providers, this is usually the full email address. + # With self-hosted email servers, this is usually the user part of the email address. + user: "gitlab-incoming@gmail.com" + # Email account password + password: "[REDACTED]" + + # IMAP server host + host: "imap.gmail.com" + # IMAP server port + port: 993 + # Whether the IMAP server uses SSL + ssl: true + # Whether the IMAP server uses StartTLS + start_tls: false + + # The mailbox where incoming mail will end up. Usually "inbox". + mailbox: "inbox" + # The IDLE command timeout. + idle_timeout: 60 + ``` + + As mentioned, the part after `+` is ignored, and this will end up in the mailbox for `gitlab-incoming@gmail.com`. 1. Run this command in the GitLab root directory to launch `mail_room`: - ```sh - bundle exec mail_room -q -c config/mail_room.yml - ``` + ```sh + bundle exec mail_room -q -c config/mail_room.yml + ``` 1. Verify that everything is configured correctly: - ```sh - bundle exec rake gitlab:incoming_email:check RAILS_ENV=development - ``` + ```sh + bundle exec rake gitlab:incoming_email:check RAILS_ENV=development + ``` 1. Reply by email should now be working. @@ -91,10 +91,10 @@ for the format of the email key: Examples of valid email keys: - - `gitlab-org-gitlab-ce-20-Author_Token12345678-issue` (create a new issue) - - `gitlab-org-gitlab-ce-20-Author_Token12345678-merge-request` (create a new merge request) - - `1234567890abcdef1234567890abcdef-unsubscribe` (unsubscribe from a conversation) - - `1234567890abcdef1234567890abcdef` (reply to a conversation) +- `gitlab-org-gitlab-ce-20-Author_Token12345678-issue` (create a new issue) +- `gitlab-org-gitlab-ce-20-Author_Token12345678-merge-request` (create a new merge request) +- `1234567890abcdef1234567890abcdef-unsubscribe` (unsubscribe from a conversation) +- `1234567890abcdef1234567890abcdef` (reply to a conversation) Please note that the action `-issue-` is used in GitLab Premium as the handler for the Service Desk feature. @@ -103,10 +103,10 @@ Please note that the action `-issue-` is used in GitLab Premium as the handler f Although we continue to support the older legacy format, no new features should use a legacy format. These are the only valid legacy formats for an email handler: - - `path/to/project+namespace` - - `path/to/project+namespace+action` - - `namespace` - - `namespace+action` +- `path/to/project+namespace` +- `path/to/project+namespace+action` +- `namespace` +- `namespace+action` Please note that `path/to/project` is used in GitLab Premium as handler for the Service Desk feature. diff --git a/doc/development/gotchas.md b/doc/development/gotchas.md index 1b9ebb50c29..13dda17bb7d 100644 --- a/doc/development/gotchas.md +++ b/doc/development/gotchas.md @@ -101,10 +101,10 @@ end in a prepended module, which is very likely the case in EE. We could see error like this: - ``` - 1.1) Failure/Error: expect_any_instance_of(ApplicationSetting).to receive_messages(messages) - Using `any_instance` to stub a method (elasticsearch_indexing) that has been defined on a prepended module (EE::ApplicationSetting) is not supported. - ``` + ``` + 1.1) Failure/Error: expect_any_instance_of(ApplicationSetting).to receive_messages(messages) + Using `any_instance` to stub a method (elasticsearch_indexing) that has been defined on a prepended module (EE::ApplicationSetting) is not supported. + ``` ### Alternative: `expect_next_instance_of` diff --git a/doc/development/logging.md b/doc/development/logging.md index d61441813b2..4f63c84fc0e 100644 --- a/doc/development/logging.md +++ b/doc/development/logging.md @@ -30,8 +30,8 @@ Completed 200 OK in 166ms (Views: 117.4ms | ActiveRecord: 27.2ms) These logs suffer from a number of problems: 1. They often lack timestamps or other contextual information (e.g. project ID, user) -2. They may span multiple lines, which make them hard to find via Elasticsearch. -3. They lack a common structure, which make them hard to parse by log +1. They may span multiple lines, which make them hard to find via Elasticsearch. +1. They lack a common structure, which make them hard to parse by log forwarders, such as Logstash or Fluentd. This also makes them hard to search. @@ -67,46 +67,46 @@ importer progresses. Here's what to do: make it easy for people to search pertinent logs in one place. For example, `geo.log` contains all logs pertaining to GitLab Geo. To create a new file: - 1. Choose a filename (e.g. `importer_json.log`). - 1. Create a new subclass of `Gitlab::JsonLogger`: - - ```ruby - module Gitlab - module Import - class Logger < ::Gitlab::JsonLogger - def self.file_name_noext - 'importer' - end + 1. Choose a filename (e.g. `importer_json.log`). + 1. Create a new subclass of `Gitlab::JsonLogger`: + + ```ruby + module Gitlab + module Import + class Logger < ::Gitlab::JsonLogger + def self.file_name_noext + 'importer' end - end - end - ``` + end + end + end + ``` - 1. In your class where you want to log, you might initialize the logger as an instance variable: + 1. In your class where you want to log, you might initialize the logger as an instance variable: - ```ruby - attr_accessor :logger + ```ruby + attr_accessor :logger - def initialize - @logger = Gitlab::Import::Logger.build - end - ``` + def initialize + @logger = Gitlab::Import::Logger.build + end + ``` - Note that it's useful to memoize this because creating a new logger - each time you log will open a file, adding unnecessary overhead. + Note that it's useful to memoize this because creating a new logger + each time you log will open a file, adding unnecessary overhead. 1. Now insert log messages into your code. When adding logs, make sure to include all the context as key-value pairs: - ```ruby - # BAD - logger.info("Unable to create project #{project.id}") - ``` + ```ruby + # BAD + logger.info("Unable to create project #{project.id}") + ``` - ```ruby - # GOOD - logger.info(message: "Unable to create project", project_id: project.id) - ``` + ```ruby + # GOOD + logger.info(message: "Unable to create project", project_id: project.id) + ``` 1. Be sure to create a common base structure of your log messages. For example, all messages might have `current_user_id` and `project_id` to make it easier @@ -116,16 +116,16 @@ importer progresses. Here's what to do: logs properly if you [mix integer and string types](https://www.elastic.co/guide/en/elasticsearch/guide/current/mapping.html#_avoiding_type_gotchas): - ```ruby - # BAD - logger.info(message: "Import error", error: 1) - logger.info(message: "Import error", error: "I/O failure") - ``` + ```ruby + # BAD + logger.info(message: "Import error", error: 1) + logger.info(message: "Import error", error: "I/O failure") + ``` - ```ruby - # GOOD - logger.info(message: "Import error", error_code: 1, error: "I/O failure") - ``` + ```ruby + # GOOD + logger.info(message: "Import error", error_code: 1, error: "I/O failure") + ``` ## Additional steps with new log files diff --git a/doc/development/profiling.md b/doc/development/profiling.md index 795523b82aa..e1d1d2e33fa 100644 --- a/doc/development/profiling.md +++ b/doc/development/profiling.md @@ -95,7 +95,9 @@ Sherlock is a custom profiling tool built into GitLab. Sherlock is _only_ available when running GitLab in development mode _and_ when setting the environment variable `ENABLE_SHERLOCK` to a non empty value. For example: - ENABLE_SHERLOCK=1 bundle exec rails s +```sh +ENABLE_SHERLOCK=1 bundle exec rails s +``` Recorded transactions can be found by navigating to `/sherlock/transactions`. @@ -106,7 +108,9 @@ Bullet adds quite a bit of logging noise it's disabled by default. To enable Bullet, set the environment variable `ENABLE_BULLET` to a non-empty value before starting GitLab. For example: - ENABLE_BULLET=true bundle exec rails s +```sh +ENABLE_BULLET=true bundle exec rails s +``` Bullet will log query problems to both the Rails log as well as the Chrome console. diff --git a/doc/development/routing.md b/doc/development/routing.md index e9c0ad8d4e8..a25eb48b73c 100644 --- a/doc/development/routing.md +++ b/doc/development/routing.md @@ -7,11 +7,15 @@ support subgroups, GitLab project and group routes use the wildcard character to match project and group routes. For example, we might have a path such as: - /gitlab-com/customer-success/north-america/west/customerA +``` +/gitlab-com/customer-success/north-america/west/customerA +``` However, paths can be ambiguous. Consider the following example: - /gitlab-com/edit +``` +/gitlab-com/edit +``` It's ambiguous whether there is a subgroup named `edit` or whether this is a special endpoint to edit the `gitlab-com` group. @@ -25,8 +29,10 @@ number of [reserved names](../user/reserved_names.md). We have a number of global routes. For example: - /-/health - /-/metrics +``` +/-/health +/-/metrics +``` ## Group routes @@ -34,10 +40,12 @@ Every group route must be under the `/-/` scope. Examples: - gitlab-org/-/edit - gitlab-org/-/activity - gitlab-org/-/security/dashboard - gitlab-org/serverless/-/activity +``` +gitlab-org/-/edit +gitlab-org/-/activity +gitlab-org/-/security/dashboard +gitlab-org/serverless/-/activity +``` To achieve that, use the `scope '-'` method. @@ -48,10 +56,12 @@ client or other software requires something different. Examples: - gitlab-org/gitlab-ce/-/activity - gitlab-org/gitlab-ce/-/jobs/123 - gitlab-org/gitlab-ce/-/settings/repository - gitlab-org/serverless/runtimes/-/settings/repository +``` +gitlab-org/gitlab-ce/-/activity +gitlab-org/gitlab-ce/-/jobs/123 +gitlab-org/gitlab-ce/-/settings/repository +gitlab-org/serverless/runtimes/-/settings/repository +``` Currently, only some project routes are placed under the `/-/` scope. However, you can help us migrate more of them! To migrate project routes: diff --git a/doc/development/sql.md b/doc/development/sql.md index edeca7fb298..a256fd46c09 100644 --- a/doc/development/sql.md +++ b/doc/development/sql.md @@ -94,7 +94,9 @@ on the amount of data indexed). To keep naming of these indexes consistent please use the following naming pattern: - index_TABLE_on_COLUMN_trigram +``` +index_TABLE_on_COLUMN_trigram +``` For example, a GIN/trigram index for `issues.title` would be called `index_issues_on_title_trigram`. |