diff options
author | Achilleas Pipinellis <axilleas@axilleas.me> | 2016-11-15 18:08:53 +0300 |
---|---|---|
committer | Achilleas Pipinellis <axilleas@axilleas.me> | 2016-11-16 00:06:32 +0300 |
commit | 9b70c09d07d180229501799f2d440191853aba57 (patch) | |
tree | 17980a2e5ea6877d93032645f525d67de486ece2 /doc | |
parent | 39a9af1594bf2365ba0da6457efef238d7e42e24 (diff) |
Refactor Redis HA docs
[ci skip]
Diffstat (limited to 'doc')
-rw-r--r-- | doc/administration/high_availability/redis.md | 547 |
1 files changed, 314 insertions, 233 deletions
diff --git a/doc/administration/high_availability/redis.md b/doc/administration/high_availability/redis.md index bb46de65e3c..6de92ae3741 100644 --- a/doc/administration/high_availability/redis.md +++ b/doc/administration/high_availability/redis.md @@ -17,10 +17,11 @@ Omnibus GitLab packages. before configuring Redis HA with GitLab to fully understand the topology and architecture. - This is the documentation for the Omnibus GitLab packages. For installations - from source, follow the [Redis HA source install](redis_source.md) guide. + from source, follow the [Redis HA source installation](redis_source.md) guide. - Redis Sentinel daemon is bundled with Omnibus GitLab Enterprise Edition only. - For the Omnibus Community Edition and installations from source, follow the - [Redis HA source install](redis_source.md) guide. + For configuring Sentinel with the Omnibus GitLab Community Edition and + installations from source, follow the + [Redis HA source installation](redis_source.md) guide. <!-- START doctoc generated TOC please keep comment here to allow auto update --> <!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE --> @@ -31,16 +32,15 @@ Omnibus GitLab packages. - [High Availability with Sentinel](#high-availability-with-sentinel) - [Recommended setup](#recommended-setup) - [Available configuration setups](#available-configuration-setups) - - [Using a non-Omnibus external Redis server](#using-a-non-omnibus-external-redis-server) - [Redis setup overview](#redis-setup-overview) - [Sentinel setup overview](#sentinel-setup-overview) -- [Redis HA configuration](#redis-ha-configuration) - - [Configuring the Master Redis instance](#configuring-the-master-redis-instance) - - [Configuring the Slave Redis instances](#configuring-the-slave-redis-instances) - - [Configuring the Sentinel instances](#configuring-the-sentinel-instances) - - [Configuring the GitLab application](#configuring-the-gitlab-application) +- [Configuring Redis HA](#configuring-redis-ha) + - [Step 1. Configuring the Master Redis instance](#step-1-configuring-the-master-redis-instance) + - [Step 2. Configuring the Slave Redis instances](#step-2-configuring-the-slave-redis-instances) + - [Step 3. Configuring the Redis Sentinel instances](#step-3-configuring-the-redis-sentinel-instances) + - [Step 4. Configuring the GitLab application](#step-4-configuring-the-gitlab-application) - [Switching from an existing single-machine installation to Redis HA](#switching-from-an-existing-single-machine-installation-to-redis-ha) -- [Minimal example configuration with 1 master, 2 slaves and 3 sentinels](#minimal-example-configuration-with-1-master-2-slaves-and-3-sentinels) +- [Example of a minimal configuration with 1 master, 2 slaves and 3 sentinels](#example-of-a-minimal-configuration-with-1-master-2-slaves-and-3-sentinels) - [Configuration for Redis master](#configuration-for-redis-master) - [Configuration for Redis slaves](#configuration-for-redis-slaves) - [Configuration for Sentinels](#configuration-for-sentinels) @@ -50,6 +50,7 @@ Omnibus GitLab packages. - [Troubleshooting Redis replication](#troubleshooting-redis-replication) - [Troubleshooting Sentinel](#troubleshooting-sentinel) - [Changelog](#changelog) + - [Experimental Redis Sentinel support](#experimental-redis-sentinel-support) <!-- END doctoc generated TOC please keep comment here to allow auto update --> @@ -59,8 +60,6 @@ Before diving into the details of setting up Redis and Redis Sentinel for HA, make sure you read this Overview section to better understand how the components are tied together. -### Prerequisites - You need at least `3` independent machines: physical, or VMs running into distinct physical machines. It is essential that all master and slaves Redis instances run in different machines. If you fail to provision the machines in @@ -84,16 +83,16 @@ components below. - Starting with GitLab `8.11`, you can configure a list of Redis Sentinel servers that will monitor a group of Redis servers to provide failover support. - Starting with GitLab `8.14`, the Omnibus GitLab Enterprise Edition package - comes with Redis sentinel daemon support. + comes with Redis Sentinel daemon support. High Availability with Redis requires a few things: - Multiple Redis instances -- Run Redis in a **Master** x **Slave** topology -- Multiple Sentinel instances + - Run Redis in a **Master** x **Slave** topology + - Multiple Sentinel instances - Application support and visibility to all Sentinel and Redis instances -Redis Sentinel can handle the most important tasks in a HA environment and that's +Redis Sentinel can handle the most important tasks in an HA environment and that's to help keep servers online with minimal to no downtime. Redis Sentinel: - Monitors **Master** and **Slaves** instances to see if they are available @@ -120,7 +119,8 @@ For a minimal setup, you will install the Omnibus GitLab package in `3` - Redis Slave + Sentinel If you are not sure or don't understand why and where the amount of nodes come -from, read [Redis Setup](#redis-setup) and [Sentinel Setup](#sentinel-setup). +from, read [Redis setup overview](#redis-setup-overview) and +[Sentinel setup overview](#sentinel-setup-overview). For a recommended setup that can resist more failures, you will install the Omnibus GitLab package in `5` **independent** machines, both with @@ -149,24 +149,9 @@ Pick the one that suits your needs. are bundled, so you can use the EE package to setup the whole Redis HA infrastructure (master, slave and Sentinel). -Note that if you have installed GitLab using the Omnibus GitLab packages (both -CE and EE), you can also use an [external Redis server](#using-a-non-omnibus-external-redis-server). - -### Using a non-Omnibus external Redis server - -If you're hosting GitLab on a cloud provider, you can optionally use a -managed service for Redis. For example, AWS offers a managed ElastiCache service -that runs Redis. - -Managed services can provide High Availability using their own proprietary -technology and provide a transparent proxy (which means that GitLab doesn't -need any additional change) or they will use Sentinel and manage it for you. - -If your provider uses Sentinel, see [GitLab Setup](#gitlab-setup) -to understand where you need to provide the list of servers and credentials. - -If you want to setup Redis by yourself, without using Omnibus, you can -read the documentation on [configuring Redis HA for source installs](redis_source.md). +Note that even if you have installed GitLab using the Omnibus GitLab packages +(both CE and EE), you can still use an +[external Redis server](#using-a-non-omnibus-external-redis-server). ### Redis setup overview @@ -197,13 +182,13 @@ each other over the network. ### Sentinel setup overview -Sentinels watch both other sentinels and Redis nodes. Whenever a Sentinel +Sentinels watch both other Sentinels and Redis nodes. Whenever a Sentinel detects that a Redis node is not responding, it will announce that to the -other sentinels. They have to reach the **quorum**, the minimum amount of -sentinels that agrees that a node is down, to be able to start a failover. +other Sentinels. They have to reach the **quorum**, that is the minimum amount +of Sentinels that agrees a node is down, in order to be able to start a failover. -Whenever the **quorum** is met, you need the **majority** of all known -Sentinel nodes to be available and reachable, to elect the Sentinel **leader** +Whenever the **quorum** is met, the **majority** of all known Sentinel nodes +need to be available and reachable, so that they can elect the Sentinel **leader** who will take all the decisions to restore the service availability by: - Promoting a new **Master** @@ -212,7 +197,8 @@ who will take all the decisions to restore the service availability by: - Reconfigure the old **Master** and demote to **Slave** when it comes back online You must have at least `3` Redis Sentinel servers, and they need to -be each in a independent machine (that are believed to fail independently). +be each in a independent machine (that are believed to fail independently), +ideally in different geographical areas. You can configure them in the same machines where you've configured the other Redis servers, but understand that if a whole node goes down, you loose both @@ -230,7 +216,7 @@ Here are some examples: - With `5` or `6` sentinels, a maximum of `2` can go down for a failover begin. - With `7` sentinels, a maximum of `3` nodes can go down. -The **Leader** election can sometimes fail the voting round when **consensus**, +The **Leader** election can sometimes fail the voting round when **consensus** is not achieved (see the odd number of nodes requirement above). In that case, a new attempt will be made after the amount of time defined in `sentinel['failover_timeout']` (in milliseconds). @@ -238,7 +224,7 @@ a new attempt will be made after the amount of time defined in >**Note:** We will see where `sentinel['failover_timeout']` is defined later. -The `failover_timeout` variable has a lot of different use cases, according to +The `failover_timeout` variable has a lot of different use cases. According to the official documentation: - The time needed to re-start a failover after a previous failover was @@ -259,7 +245,7 @@ the official documentation: the slaves will be reconfigured by the Sentinels anyway, but not with the exact parallel-syncs progression as specified. -## Redis HA configuration +## Configuring Redis HA This is the section where we install and setup the new Redis instances. @@ -271,95 +257,138 @@ This is the section where we install and setup the new Redis instances. `redis['password']`. At any time during a failover the Sentinels can reconfigure a node and change its status from master to slave and vice versa. -A summary of what are we going to do: +### Prerequisites -1. Provision the required number of instances specified previously: - - You can opt to install Redis and Sentinel in the same machine or each in - independent ones. - - Don't install Redis and Sentinel in the same machines your GitLab application - is running on. - - All machines must be able to talk to each other and accept incoming - connections over Redis (`6379`) and Sentinel (`26379`) ports (unless you - change the default ports). - - GitLab machines must be able to access these machines and with the same - permissions. - - Protect them from access from external networks (Internet), - to harden the security. +The prerequisites for a HA Redis setup are the following: -1. Download/install Omnibus GitLab using **steps 1 and 2** from - [GitLab downloads](https://about.gitlab.com/downloads) in each node. - - Do not complete other steps on the download page. - - Make sure you select the correct Omnibus package, with the same version - and type (Community, Enterprise editions) of your current install. +1. Provision the minimum required number of instances as specified in the + [recommended setup](#recommended-setup) section. +1. **Do NOT** install Redis or Redis Sentinel in the same machines your + GitLab application is running on. You can however opt in to install Redis + and Sentinel in the same machine (each in independent ones is recommended + though). +1. All Redis nodes must be able to talk to each other and accept incoming + connections over Redis (`6379`) and Sentinel (`26379`) ports (unless you + change the default ones). +1. The server that hosts the GitLab application must be able to access the + Redis nodes. +1. Protect the nodes from access from external networks (Internet), using + firewall. -1. Run `touch /etc/gitlab/skip-auto-migrations` to prevent database migrations - from running on upgrade. Only the primary GitLab application server should - handle migrations. +### Step 1. Configuring the master Redis instance -1. Edit `/etc/gitlab/gitlab.rb` and make the changes based on the - [Example Configurations](#example-configurations). +1. SSH into the **master** Redis server and login as root: -### Configuring the Master Redis instance + ``` + sudo -i + ``` -You will need to configure the following in `/etc/gitlab/gitlab.rb`: +1. [Download/install](https://about.gitlab.com/installation) the Omnibus GitLab + package using **steps 1 and 2** from the GitLab downloads page. + - Make sure you select the correct Omnibus package, with the same version + and type (Community, Enterprise editions) of your current install. + - Do not complete any other steps on the download page. -1. Define `redis_master_role['enable']` to `true`, to disable other services - in the machine (you can still enable Sentinel) +1. Edit `/etc/gitlab/gitlab.rb` and add the contents: -1. Define a `redis['bind']` address pointing to a local IP that your other machines - can reach you. - - If you really need to bind to an external accessible IP, make - sure you add extra firewall rules to prevent unauthorized access. - - You can also set bind to `0.0.0.0` which listen in all interfaces. + ```ruby + # Enable the master role and disable all other services in the machine + # (you can still enable Sentinel). + redis_master_role['enable'] = true + + # IP address pointing to a local IP that the other machines can reach to. + # You can also set bind to '0.0.0.0' which listen in all interfaces. + # If you really need to bind to an external accessible IP, make + # sure you add extra firewall rules to prevent unauthorized access. + redis['bind'] = '10.0.0.1' + + # Define a port so Redis can listen for TCP requests which will allow other + # machines to connect to it. + redis['port'] = 6379 + + # Set up password authentication for Redis (use the same password in all nodes). + redis['password'] = 'redis-password-goes-here' + ``` + +1. To prevent database migrations from running on upgrade, run: + + ``` + touch /etc/gitlab/skip-auto-migrations + ``` -1. Define a `redis['port']` so redis can listen for TCP requests which will - allow other machines to connect to it. + Only the primary GitLab application server should handle migrations. -1. Set up a password authentication with `redis['password']` and - `redis['master_password']` (use the same password in all nodes). +1. [Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. -1. [Reconfigure Omnibus GitLab][reocnfigure] for the changes to take effect. +### Step 2. Configuring the slave Redis instances -### Configuring the Slave Redis instances +1. SSH into the **slave** Redis server and login as root: -You will need to configure the following in `/etc/gitlab/gitlab.rb`: + ``` + sudo -i + ``` -1. Define `redis_slaves_role['enable']` to `true`, to disable other services - in the machine (you can still enable Sentinel) - - This will also set automatically `redis['master'] = false`. +1. [Download/install](https://about.gitlab.com/installation) the Omnibus GitLab + package using **steps 1 and 2** from the GitLab downloads page. + - Make sure you select the correct Omnibus package, with the same version + and type (Community, Enterprise editions) of your current install. + - Do not complete any other steps on the download page. -1. Define a `redis['bind']` address pointing to a local IP that your other machines - can reach you. - - If you really need to bind to an external accessible IP, make - sure you add extra firewall rules to prevent unauthorized access. - - You can also set bind to `0.0.0.0` which listen in all interfaces. +1. Edit `/etc/gitlab/gitlab.rb` and add the contents: + + ```ruby + # Enable the slave role and disable all other services in the machine + # (you can still enable Sentinel). This will also set automatically + # `redis['master'] = false`. + redis_slave_role['enable'] = true -1. Define a `redis['port']` so redis can listen for TCP requests which will - allow other machines to connect to it. + # IP address pointing to a local IP that the other machines can reach to. + # You can also set bind to '0.0.0.0' which listen in all interfaces. + # If you really need to bind to an external accessible IP, make + # sure you add extra firewall rules to prevent unauthorized access. + redis['bind'] = '10.0.0.2' -1. Set up a password authentication with `redis['password']` and - `redis['master_password']` (use the same password in all nodes). -1. Define `redis['master_ip']` with the IP of the **Master** Redis. + # Define a port so Redis can listen for TCP requests which will allow other + # machines to connect to it. + redis['port'] = 6379 -1. Define `redis['master_port']` with the port of the **Master** Redis (default to `6379`). + # The same password for Redeis authentication you set up for the master node. + redis['password'] = 'redis-password-goes-here' -Initial **Slave** nodes require `redis['master']` defined to `false` and -`redis['master_ip']` pointing to the initial **Master**. If you use the -simplified configuration by enabling `redis_slave_role['enable']`, you -just need to fill in the `redis['master_ip']`. + # The IP of the master Redis node. + redis['master_ip'] = '10.0.0.1' -This values don't have to be changed again in `/etc/gitlab/gitlab.rb` after + # Port of master Redis server, uncomment to change to non default. Defaults + # to `6379`. + #redis['master_port'] = 6379 + ``` + +1. To prevent database migrations from running on upgrade, run: + + ``` + touch /etc/gitlab/skip-auto-migrations + ``` + + Only the primary GitLab application server should handle migrations. + +1. [Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. +1. Go through the steps again for all the other slave nodes. + +--- + +These values don't have to be changed again in `/etc/gitlab/gitlab.rb` after a failover, as the nodes will be managed by the Sentinels, and even after a `gitlab-ctl reconfigure`, they will get their configuration restored by the same Sentinels. -### Configuring the Redis Sentinel instances +### Step 3. Configuring the Redis Sentinel instances >**Note:** -- Redis Sentinel is bundled with Omnibus GitLab Enterprise Edition only. For the - Omnibus Community Edition and installations from source, follow the - [Redis HA source install](redis_source.md) guide. +Redis Sentinel is bundled with Omnibus GitLab Enterprise Edition only. The +following section assumes you are using Omnibus GitLab Enterprise Edition. +For the Omnibus Community Edition and installations from source, follow the +[Redis HA source install](redis_source.md) guide. Now that the Redis servers are all set up, let's configure the Sentinel servers. @@ -369,15 +398,112 @@ correctly, please read the [Troubleshooting Replication](#troubleshooting-replic and fix it before proceeding with Sentinel setup. You must have at least `3` Redis Sentinel servers, and they need to -be each in a independent machine. You can configure them in the same +be each in an independent machine. You can configure them in the same machines where you've configured the other Redis servers. -With GitLab Enterprise Edition, you can use the Omnibus package to setup multiple -machines with the Sentinel daemon. +With GitLab Enterprise Edition, you can use the Omnibus package to setup +multiple machines with the Sentinel daemon. + +--- + +1. SSH into the server that will host Redis Sentinel and login as root: + + ``` + sudo -i + ``` + +1. **You can omit this step if the Sentinels will be hosted in the same node as + the other Redis instances.** + + [Download/install](https://about.gitlab.com/downloads-ee) the + Omnibus GitLab Enterprise Edition package using **steps 1 and 2** from the + GitLab downloads page. + - Make sure you select the correct Omnibus package, with the same version + the GitLab application is running. + - Do not complete any other steps on the download page. -See [example configuration](#configuration-for-sentinel-ee-only) below. +1. Edit `/etc/gitlab/gitlab.rb` and add the contents (if you are installing the + Sentinels in the same node as the other Redis instances, some values might + be duplicate below): -### Configuring the GitLab application + + ```ruby + redis_sentinel_role['enable'] = true + + # Must be the same in every sentinel node + redis['master_name'] = 'gitlab-redis' + + # The same password for Redis authentication you set up for the master node. + redis['password'] = 'redis-password-goes-here' + + # The IP of the master Redis node. + redis['master_ip'] = '10.0.0.1' + + # Define a port so Redis can listen for TCP requests which will allow other + # machines to connect to it. + redis['port'] = 6379 + + # Port of master Redis server, uncomment to change to non default. Defaults + # to `6379`. + #redis['master_port'] = 6379 + + ## Configure Sentinel + sentinel['bind'] = '10.0.0.1' + + # Port that Sentinel listens on, uncomment to change to non default. Defaults + # to `26379`. + # sentinel['port'] = 26379 + + ## Quorum must reflect the amount of voting sentinels it take to start a failover. + ## Value must NOT be greater then the amount of sentinels. + ## + ## The quorum can be used to tune Sentinel in two ways: + ## 1. If a the quorum is set to a value smaller than the majority of Sentinels + ## we deploy, we are basically making Sentinel more sensible to master failures, + ## triggering a failover as soon as even just a minority of Sentinels is no longer + ## able to talk with the master. + ## 1. If a quorum is set to a value greater than the majority of Sentinels, we are + ## making Sentinel able to failover only when there are a very large number (larger + ## than majority) of well connected Sentinels which agree about the master being down.s + sentinel['quorum'] = 2 + + ## Consider unresponsive server down after x amount of ms. + # sentinel['down_after_milliseconds'] = 10000 + + ## Specifies the failover timeout in milliseconds. It is used in many ways: + ## + ## - The time needed to re-start a failover after a previous failover was + ## already tried against the same master by a given Sentinel, is two + ## times the failover timeout. + ## + ## - The time needed for a slave replicating to a wrong master according + ## to a Sentinel current configuration, to be forced to replicate + ## with the right master, is exactly the failover timeout (counting since + ## the moment a Sentinel detected the misconfiguration). + ## + ## - The time needed to cancel a failover that is already in progress but + ## did not produced any configuration change (SLAVEOF NO ONE yet not + ## acknowledged by the promoted slave). + ## + ## - The maximum time a failover in progress waits for all the slaves to be + ## reconfigured as slaves of the new master. However even after this time + ## the slaves will be reconfigured by the Sentinels anyway, but not with + ## the exact parallel-syncs progression as specified. + # sentinel['failover_timeout'] = 60000 + ``` + +1. To prevent database migrations from running on upgrade, run: + + ``` + touch /etc/gitlab/skip-auto-migrations + ``` + + Only the primary GitLab application server should handle migrations. + +1. [Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. +1. Go through the steps again for all the other Sentinel nodes. + +### Step 4. Configuring the GitLab application The final part is to inform the main GitLab application server of the Redis Sentinels servers and authentication credentials. @@ -395,14 +521,23 @@ which ideally should not have Redis or Sentinels on it for a HA setup. 1. Edit `/etc/gitlab/gitlab.rb` and add/change the following lines: - - `redis['master_name']` - this is the `master-group-name` from sentinel (default: `gitlab-redis`) - - `redis['master_password']` - the same password you've defined before for Redis and Sentinels - - `gitlab_rails['redis_sentinels']` - a list of sentinels with `host` and `port` + ``` + # Must be the same in every sentinel node + redis['master_name'] = 'gitlab-redis' + + # The same password for Redis authentication you set up for the master node. + redis['password'] = 'redis-password-goes-here' + + # A list of sentinels with `host` and `port` + gitlab_rails['redis_sentinels'] = [ + {'host' => '10.0.0.1', 'port' => 26379}, + {'host' => '10.0.0.2', 'port' => 26379}, + {'host' => '10.0.0.3', 'port' => 26379} + ] + ``` 1. [Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. -See [example configuration](#configuration-for-gitlab) below. - ## Switching from an existing single-machine installation to Redis HA If you already have a single-machine GitLab install running, you will need to @@ -436,14 +571,15 @@ unauthorized access from other machines and block traffic from the outside (Internet). We will use the same `3` nodes with **Redis** + **Sentinel** topology -discussed in [Redis Setup](#redis-setup) and [Sentinel Setup](#sentinel-setup) -documentation. +discussed in [Redis setup overview](#redis-setup-overview) and +[Sentinel setup overview](#sentinel-setup-overview) documentation. Here is a list and description of each **machine** and the assigned **IP**: * `10.0.0.1`: Redis Master + Sentinel 1 * `10.0.0.2`: Redis Slave 1 + Sentinel 2 -* `10.0.0.2`: Redis Slave 2 + Sentinel 3 +* `10.0.0.3`: Redis Slave 2 + Sentinel 3 +* `10.0.0.4`: GitLab application Please note that after the initial configuration, if a failover is initiated by the Sentinel nodes, the Redis nodes will be reconfigured and the **Master** @@ -454,7 +590,7 @@ The same thing will happen with `sentinel.conf` that will be overridden after th initial execution, after any new sentinel node starts watching the **Master**, or a failover promotes a different **Master** node. -### Configuration for Redis master +### Example configuration for Redis master **Example configation for Redis Master:** @@ -466,14 +602,13 @@ redis_master_role['enable'] = true redis['bind'] = '10.0.0.1' redis['port'] = 6379 redis['password'] = 'redis-password-goes-here' -redis['master_password'] = 'redis-password-goes-here' ``` [Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. -### Configuration for Redis slaves +### Example configuration for Redis slaves -**Example configation for Slave 1:** +**Example configuration for Slave 1:** In `/etc/gitlab/gitlab.rb`: @@ -489,9 +624,9 @@ redis['master_ip'] = '10.0.0.1' # IP of master Redis server #redis['master_port'] = 6379 # Port of master Redis server, uncomment to change to non default ``` -Reconfigure Omnibus GitLab for the changes to take effect: `sudo gitlab-ctl reconfigure` +[Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. -**Example configation for Slave 2:** +**Example configuration for Slave 2:** In `/etc/gitlab/gitlab.rb`: @@ -509,7 +644,7 @@ redis['master_ip'] = '10.0.0.1' # IP of master Redis server [Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. -### Configuration for Sentinels +### Example configuration for Sentinels >**Note:** Redis Sentinel is bundled with Omnibus GitLab Enterprise Edition only. For the @@ -519,7 +654,7 @@ Omnibus Community Edition and installations from source, follow the Please note that some of the variables are already configured previously as they are required for Redis replication. -**Example configation for Sentinel 1:** +**Example configuration for Sentinel 1:** In `/etc/gitlab/gitlab.rb`: @@ -534,46 +669,17 @@ redis['master_ip'] = '10.0.0.1' # ip of the initial master redis instance ## Configure Sentinel sentinel['bind'] = '10.0.0.1' # sentinel['port'] = 26379 # uncomment to change default port - -## Quorum must reflect the amount of voting sentinels it take to start a failover. -## Value must NOT be greater then the ammount of sentinels. -## -## The quorum can be used to tune Sentinel in two ways: -## 1. If a the quorum is set to a value smaller than the majority of Sentinels -## we deploy, we are basically making Sentinel more sensible to master failures, -## triggering a failover as soon as even just a minority of Sentinels is no longer -## able to talk with the master. -## 1. If a quorum is set to a value greater than the majority of Sentinels, we are -## making Sentinel able to failover only when there are a very large number (larger -## than majority) of well connected Sentinels which agree about the master being down.s sentinel['quorum'] = 2 ## Consider unresponsive server down after x amount of ms. # sentinel['down_after_milliseconds'] = 10000 -## Specifies the failover timeout in milliseconds. It is used in many ways: -## -## - The time needed to re-start a failover after a previous failover was -## already tried against the same master by a given Sentinel, is two -## times the failover timeout. -## -## - The time needed for a slave replicating to a wrong master according -## to a Sentinel current configuration, to be forced to replicate -## with the right master, is exactly the failover timeout (counting since -## the moment a Sentinel detected the misconfiguration). -## -## - The time needed to cancel a failover that is already in progress but -## did not produced any configuration change (SLAVEOF NO ONE yet not -## acknowledged by the promoted slave). -## -## - The maximum time a failover in progress waits for all the slaves to be -## reconfigured as slaves of the new master. However even after this time -## the slaves will be reconfigured by the Sentinels anyway, but not with -## the exact parallel-syncs progression as specified. # sentinel['failover_timeout'] = 60000 ``` -**Example configation for Sentinel 2:** +[Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. + +**Example configuration for Sentinel 2:** In `/etc/gitlab/gitlab.rb`: @@ -589,45 +695,17 @@ redis['master_ip'] = '10.0.0.1' # ip of the initial master redis instance sentinel['bind'] = '10.0.0.2' # sentinel['port'] = 26379 # uncomment to change default port -## Quorum must reflect the amount of voting sentinels it take to start a failover. -## Value must NOT be greater then the ammount of sentinels. -## -## The quorum can be used to tune Sentinel in two ways: -## 1. If a the quorum is set to a value smaller than the majority of Sentinels -## we deploy, we are basically making Sentinel more sensible to master failures, -## triggering a failover as soon as even just a minority of Sentinels is no longer -## able to talk with the master. -## 1. If a quorum is set to a value greater than the majority of Sentinels, we are -## making Sentinel able to failover only when there are a very large number (larger -## than majority) of well connected Sentinels which agree about the master being down.s sentinel['quorum'] = 2 ## Consider unresponsive server down after x amount of ms. # sentinel['down_after_milliseconds'] = 10000 -## Specifies the failover timeout in milliseconds. It is used in many ways: -## -## - The time needed to re-start a failover after a previous failover was -## already tried against the same master by a given Sentinel, is two -## times the failover timeout. -## -## - The time needed for a slave replicating to a wrong master according -## to a Sentinel current configuration, to be forced to replicate -## with the right master, is exactly the failover timeout (counting since -## the moment a Sentinel detected the misconfiguration). -## -## - The time needed to cancel a failover that is already in progress but -## did not produced any configuration change (SLAVEOF NO ONE yet not -## acknowledged by the promoted slave). -## -## - The maximum time a failover in progress waits for all the slaves to be -## reconfigured as slaves of the new master. However even after this time -## the slaves will be reconfigured by the Sentinels anyway, but not with -## the exact parallel-syncs progression as specified. # sentinel['failover_timeout'] = 60000 ``` -**Example configation for Sentinel 3:** +[Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. + +**Example configuration for Sentinel 3:** In `/etc/gitlab/gitlab.rb`: @@ -643,44 +721,37 @@ redis['master_ip'] = '10.0.0.1' # ip of the initial master redis instance sentinel['bind'] = '10.0.0.3' # sentinel['port'] = 26379 # uncomment to change default port -## Quorum must reflect the amount of voting sentinels it take to start a failover. -## Value must NOT be greater then the ammount of sentinels. -## -## The quorum can be used to tune Sentinel in two ways: -## 1. If a the quorum is set to a value smaller than the majority of Sentinels -## we deploy, we are basically making Sentinel more sensible to master failures, -## triggering a failover as soon as even just a minority of Sentinels is no longer -## able to talk with the master. -## 1. If a quorum is set to a value greater than the majority of Sentinels, we are -## making Sentinel able to failover only when there are a very large number (larger -## than majority) of well connected Sentinels which agree about the master being down.s sentinel['quorum'] = 2 ## Consider unresponsive server down after x amount of ms. # sentinel['down_after_milliseconds'] = 10000 -## Specifies the failover timeout in milliseconds. It is used in many ways: -## -## - The time needed to re-start a failover after a previous failover was -## already tried against the same master by a given Sentinel, is two -## times the failover timeout. -## -## - The time needed for a slave replicating to a wrong master according -## to a Sentinel current configuration, to be forced to replicate -## with the right master, is exactly the failover timeout (counting since -## the moment a Sentinel detected the misconfiguration). -## -## - The time needed to cancel a failover that is already in progress but -## did not produced any configuration change (SLAVEOF NO ONE yet not -## acknowledged by the promoted slave). -## -## - The maximum time a failover in progress waits for all the slaves to be -## reconfigured as slaves of the new master. However even after this time -## the slaves will be reconfigured by the Sentinels anyway, but not with -## the exact parallel-syncs progression as specified. # sentinel['failover_timeout'] = 60000 ``` +[Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. + +### Example configuration for the GitLab application + +In `/etc/gitlab/gitlab.rb`: + +``` +# Must be the same in every sentinel node +redis['master_name'] = 'gitlab-redis' + +# The same password for Redis authentication you set up for the master node. +redis['password'] = 'redis-password-goes-here' + +# A list of sentinels with `host` and `port` +gitlab_rails['redis_sentinels'] = [ + {'host' => '10.0.0.1', 'port' => 26379}, + {'host' => '10.0.0.2', 'port' => 26379}, + {'host' => '10.0.0.3', 'port' => 26379} +] +``` + +[Reconfigure Omnibus GitLab][reconfigure] for the changes to take effect. + ## Advanced configuration Omnibus GitLab configures some things behind the curtains to make the sysadmins' @@ -688,8 +759,8 @@ lives easier. If you want to know what happens underneath keep reading. ### Control running services -In the previous example above we've used `redis_sentinel_role` and -`redis_master_role` which simplify the amount of configuration changes. +In the previous example, we've used `redis_sentinel_role` and +`redis_master_role` which simplifies the amount of configuration changes. If you want more control, here is what each one sets for you automatically when enabled: @@ -698,10 +769,10 @@ when enabled: ## Redis Sentinel Role redis_sentinel_role['enable'] = true -# When Sentinel Role is enabled, the following services are enabled/disabled: +# When Sentinel Role is enabled, the following services are also enabled sentinel['enable'] = true -# This others are disabled: +# The following services are disabled redis['enable'] = false bootstrap['enable'] = false nginx['enable'] = false @@ -709,17 +780,17 @@ postgresql['enable'] = false gitlab_rails['enable'] = false mailroom['enable'] = false -## Redis master/slave Role: +------- + +## Redis master/slave Role redis_master_role['enable'] = true # enable only one of them redis_slave_role['enable'] = true # enable only one of them -# When Redis Master or Slave role are enabled, the following services are enabled/disabled: -# (Note that if redis and sentinel roles are combined both services will be enabled) +# When Redis Master or Slave role are enabled, the following services are +# enabled/disabled. Note that if Redis and Sentinel roles are combined, both +# services will be enabled. -# When Sentinel Role is enabled, the following services are enabled/disabled: -redis['enable'] = true - -# This others are disabled: +# The following services are disabled sentinel['enable'] = false bootstrap['enable'] = false nginx['enable'] = false @@ -727,7 +798,7 @@ postgresql['enable'] = false gitlab_rails['enable'] = false mailroom['enable'] = false -# Redis Slave role also change this setting from default 'true' to 'false': +# For Redis Slave role, also change this setting from default 'true' to 'false': redis['master'] = false ``` @@ -856,6 +927,16 @@ To make sure your configuration is correct: Changes to Redis HA over time. +**8.14** + +- Redis Sentinel support is production-ready and bundled in the Omnibus GitLab + Enterprise Edition package +- Documentation restructure for better readability + +**8.11** + +- Experimental Redis Sentinel support was added + ### Experimental Redis Sentinel support > @@ -880,7 +961,7 @@ Read more on high-availability configuration: [gh-534]: https://github.com/redis/redis-rb/issues/534 [redis]: http://redis.io/ [sentinel]: http://redis.io/topics/sentinel -[omnifile]: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/82b7345b150f072c8673c79738ce893f92d0d652/files/gitlab-cookbooks/gitlab/libraries/gitlab_rails.rb#L134-159 +[omnifile]: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/libraries/gitlab_rails.rb [source]: ../../install/installation.md [ce]: https://about.gitlab.com/downloads [ee]: https://about.gitlab.com/downloads-ee |