diff options
author | Gabriel Mazetto <gabriel@gitlab.com> | 2016-10-15 06:40:15 +0300 |
---|---|---|
committer | Gabriel Mazetto <gabriel@gitlab.com> | 2016-11-08 08:38:29 +0300 |
commit | c4d3c0de1f489639e1e2f1a12b7b4d88384d3e06 (patch) | |
tree | abe1fe56ac4344055cc07220177ce1cad125d6f2 /doc | |
parent | f54d60b41df3d30181a371d3799fa8b9451d4c5b (diff) |
Improved documentation on HA sentinel part and Redis replication troubleshooting.
Diffstat (limited to 'doc')
-rw-r--r-- | doc/administration/high_availability/redis.md | 316 |
1 files changed, 256 insertions, 60 deletions
diff --git a/doc/administration/high_availability/redis.md b/doc/administration/high_availability/redis.md index 9fca7bfb8b4..840f5896bd7 100644 --- a/doc/administration/high_availability/redis.md +++ b/doc/administration/high_availability/redis.md @@ -8,6 +8,27 @@ that comes bundled with GitLab Omnibus packages. information. We recommend using a combination of a Redis password and tight firewall rules to secure your Redis service. +<!-- START doctoc generated TOC please keep comment here to allow auto update --> +<!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE --> +**Table of Contents** + +- [Configure your own Redis server](#configure-your-own-redis-server) +- [Configure Redis using Omnibus](#configure-redis-using-omnibus) +- [Experimental Redis Sentinel support](#experimental-redis-sentinel-support) + - [Redis setup](#redis-setup) + - [Source install](#source-install) + - [Omnibus Install](#omnibus-install) + - [Troubleshooting Replication](#troubleshooting-replication) + - [Sentinel](#sentinel) + - [Sentinel setup (Community Edition)](#sentinel-setup-community-edition) + - [Sentinel setup (EE Only)](#sentinel-setup-ee-only) + - [GitLab setup](#gitlab-setup) + - [Sentinel troubleshooting](#sentinel-troubleshooting) + - [Omnibus install](#omnibus-install) + - [Source install](#source-install-1) + +<!-- END doctoc generated TOC please keep comment here to allow auto update --> + ## Configure your own Redis server If you're hosting GitLab on a cloud provider, you can optionally use a @@ -37,6 +58,7 @@ Redis. unicorn['enable'] = false sidekiq['enable'] = false postgresql['enable'] = false + gitlab_rails['enable'] = false gitlab_workhorse['enable'] = false mailroom['enable'] = false @@ -59,120 +81,294 @@ Redis. ## Experimental Redis Sentinel support -> [Introduced][ce-1877] in GitLab 8.11. +> [Introduced][ce-1877] in GitLab 8.11, improved in 8.13. Since GitLab 8.11, you can configure a list of Redis Sentinel servers that will monitor a group of Redis servers to provide you with a standard failover support. -There is currently one exception to the Sentinel support: `mail_room`, the -component that processes incoming emails. It doesn't support Sentinel yet, but -we hope to integrate a future release that does support it. - To get a better understanding on how to correctly setup Sentinel, please read the [Redis Sentinel documentation](http://redis.io/topics/sentinel) first, as failing to configure it correctly can lead to data loss. +Redis Sentinel can handle the most important tasks in a HA environment to help +keep servers online with minimal to no downtime: + +- Monitors master and slave instances to see if they are available +- Promote a slave to master when the master fails. +- Demote a master to slave when failed master comes back online (to prevent + data-partitioning). +- Can be queried by clients to always connect to the correct master server. + +There is currently one exception to the Sentinel support: `mail_room`, the +component that processes incoming emails. It doesn't support Sentinel yet, but +we hope to integrate a future release that does support it soon. + The configuration consists of three parts: -- Redis setup -- Sentinel setup -- GitLab setup +- Setup Redis Master and Slave nodes +- Setup Sentinel nodes +- Setup GitLab + +> **IMPORTANT**: You need at least 3 independent machines: physical, or VMs +running into distinct physical machines. If you fail to provision the +machines in that specific way, any issue with the shared environment can +bring your entire setup down. Read carefully how to configure those components below. ### Redis setup -You must have at least 2 Redis servers: 1 Master, 1 or more Slaves. +You must have at least `3` Redis servers: `1` Master, `2` Slaves, and they need to +be each in a independent machine (see explanation above). + They should be configured the same way and with similar server specs, as -in a failover situation, any Slave can be elected as the new Master by +in a failover situation, any `Slave` can be elected as the new `Master` by the Sentinel servers. -In a minimal setup, the only required change for the slaves in `redis.conf` -is the addition of a `slaveof` line pointing to the initial master. -You can increase the security by defining a `requirepass` configuration in -the master, and `masterauth` in slaves. +With Sentinel, you must define a password to protect the access as both +Sentinel instances and other redis instances should be able to talk to +each other over the network. ---- +You'll need to define both `requirepass` and `masterauth` in all +nodes because they can be re-configured at any time by the Sentinels +during a failover, and change it's status as `Master` or `Slave`. -**Configuring your own Redis server** +Initial `Slave` nodes will have in `redis.conf` an additional `slaveof` line +pointing to the initial `Master`. -1. Add to the slaves' `redis.conf`: +#### Source install - ```conf - # IP and port of the master Redis server - slaveof 10.10.10.10 6379 - ``` +**Master Redis instance** -1. Optionally, set up password authentication for increased security. - Add the following to master's `redis.conf`: +You need to make the following changes in `redis.conf`: - ```conf - # Optional password authentication for increased security - requirepass "<password>" - ``` +1. Define a `bind` address pointing to a local IP that your other machines + can reach you. If you really need to bind to an external acessible IP, make + sure you add extra firewall rules to prevent unauthorized access: -1. Then add this line to all the slave servers' `redis.conf`: + ```conf + # By default, if no "bind" configuration directive is specified, Redis listens + # for connections from all the network interfaces available on the server. + # It is possible to listen to just one or multiple selected interfaces using + # the "bind" configuration directive, followed by one or more IP addresses. + # + # Examples: + # + # bind 192.168.1.100 10.0.0.1 + # bind 127.0.0.1 ::1 + bind 0.0.0.0 # This will bind to all interfaces + ``` + +1. Define a `port` to force redis to listin on TCP so other machines can + connect to it: + + ```conf + # Accept connections on the specified port, default is 6379 (IANA #815344). + # If port 0 is specified Redis will not listen on a TCP socket. + port 6379 + ``` + +1. Set up password authentication (use the same password in all nodes) ```conf - masterauth "<password>" + requirepass "redis-password-goes-here" + masterauth "redis-password-goes-here" ``` 1. Restart the Redis services for the changes to take effect. ---- +**Slave Redis instance** -**Using Redis via Omnibus** +1. Follow same instructions from master with the extra change in `redis.conf`: -1. Edit `/etc/gitlab/gitlab.rb` of a master Redis machine (usualy a single machine): + ```conf + # IP and port of the master Redis server + slaveof 10.10.10.10 6379 + ``` - ```ruby - ## Redis TCP support (will disable UNIX socket transport) - redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one - redis['port'] = 6379 +1. Restart the Redis services for the changes to take effect. - ## Master redis instance - redis['password'] = 'redis-password-goes-here' - ``` +#### Omnibus Install -1. Edit `/etc/gitlab/gitlab.rb` of a slave Redis machine (should be one or more machines): +You need to install the omnibus package in 3 different and independent machines. +We will elect one as the initial `Master` and the other 2 as `Slaves`. - ```ruby - ## Redis TCP support (will disable UNIX socket transport) - redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one - redis['port'] = 6379 +If you are migrating from a single machine install, you may want to setup the +machines as Slaves, pointing to the original machine as `Master`, to migrate +the data first, and than switch to this setup. - ## Slave redis instance - redis['master'] = false - redis['master_ip'] = '10.10.10.10' # IP of master Redis server - redis['master_port'] = 6379 # Port of master Redis server - redis['master_password'] = "redis-password-goes-here" - ``` +To disable redis in the single install, edit `/etc/gitlab/gitlab.rb`: + +```ruby +redis['enable'] = false +``` + +**Master Redis instances** + +You need to make the following changes in `/etc/gitlab/gitlab.rb`: + +1. Define a `redis['bind']` address pointing to a local IP that your other machines + can reach you. If you really need to bind to an external acessible IP, make + sure you add extra firewall rules to prevent unauthorized access. +1. Define a `redis['port']` to force redis to listin on TCP so other machines can + connect to it. +1. Set up password authentication with `redis['master_password']` (use the same + password in all nodes). -1. Reconfigure the GitLab for the changes to take effect: `sudo gitlab-ctl reconfigure` +```ruby +## Redis TCP support (will disable UNIX socket transport) +redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one +redis['port'] = 6379 +redis['requirepass'] = 'redis-password-goes-here' +redis['master_password'] = 'redis-password-goes-here' +``` + +Reconfigure GitLab Omnibus for the changes to take effect: `sudo gitlab-ctl reconfigure` + +**Slave Redis instances** + +You need to make the same changes listed for the `Master` instance, +with an additional `Slave` section as in the example below: + +```ruby +## Redis TCP support (will disable UNIX socket transport) +redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one +redis['port'] = 6379 +redis['requirepass'] = 'redis-password-goes-here' +redis['master_password'] = 'redis-password-goes-here' + +## Slave redis instance +redis['master'] = false +redis['master_ip'] = '10.10.10.10' # IP of master Redis server +redis['master_port'] = 6379 # Port of master Redis server +``` + +Reconfigure GitLab Omnibus for the changes to take effect: `sudo gitlab-ctl reconfigure` + +#### Troubleshooting Replication + +You can check if everything is correct by connecting to each server using +`redis-cli` application, and sending the `INFO` command. + +If authentication was correctly defined, it should fail with: +`NOAUTH Authentication required` error. Try to authenticate with the +previous defined password with `AUTH redis-password-goes-here` and +try the `INFO` command again. + +Look for the `# Replication` section where you should see some important +information like the `role` of the server. + +When connected to a `master` redis, you will see the number of connected +`slaves`, and a list of each with connection details. + +When it's a `slave`, you will see details of the master connection and if +its `up` or `down`. --- Now that the Redis servers are all set up, let's configure the Sentinel servers. -### Sentinel setup +If you are not sure if your Redis servers are working and replicating +correctly, please read the [Troubleshooting Replication](#troubleshooting-replication) +and fix it before proceeding with Sentinel setup. + +### Sentinel + +You must have at least `3` Redis Sentinel servers, and they need to +be each in a independent machine. You can install them in the same +machines you installed the other `3` Redis servers. + +This number is required for the consensus algorithm to be effective +in the case of a failure. You should always have and `odd` number +of Sentinel nodes provisioned. -We provide an automated way to setup and run the Sentinel daemon -with GitLab EE. +Here is a simple explanation on how Sentinel handles a failover: -See the instructions below how to setup it by yourself. +When a number of Sentinels (`quorum` value) agree the fact the `master` is +not reachable, the **majority** of the sentinels must elect a temporary +Sentinel `leader`, that will be responsible to start the failover proceedings. -Here is an example configuration file (`sentinel.conf`) for a Sentinel node: +As an example, for a cluster of `3` Sentinels, at least `2` must agree on a +`leader`. If you have total of `5` at least `3` must agree on the leader. + +The `quorum` is only used to detect failure, not to elect the `leader`. + +Official [Sentinel documentation](http://redis.io/topics/sentinel#example-sentinel-deployments) +also lists different network topologies and warns againts situations like +network partition and how it can affect the state of the HA solution. Make +sure you read it carefully and understand the implications in your current +setup. + +To make Sentinel setup easier, ee provide an [automated way to setup and run](#sentinel-setup-ee-only) +the Sentinel daemon with GitLab EE. + +#### Sentinel setup (Community Edition) + +For GitLab CE, you need to install, configure, execute and monitor Sentinel +by yourself. + +Here is an example configuration file (`sentinel.conf`) for a minimal Sentinel +node: ```conf -port 26379 -sentinel monitor gitlab-redis 10.0.0.1 6379 1 +bind 0.0.0.0 # bind to all interfaces or change to a specific IP +port 26379 # default sentinel port +sentinel auth-pass gitlab-redis redis-password-goes-here +sentinel monitor gitlab-redis 10.0.0.1 6379 2 sentinel down-after-milliseconds gitlab-redis 10000 sentinel config-epoch gitlab-redis 0 sentinel leader-epoch gitlab-redis 0 ``` +#### Sentinel setup (EE Only) + +To setup sentinel, you must edit `/etc/gitlab/gitlab.rb` file. +This is a minimal configuration required to run the daemon: + +```ruby +redis['master_name'] = 'gitlab-redis' # must be the same in every sentinel node +redis['master_ip'] = '10.0.0.1' # ip of the initial master redis instance +redis['master_port'] = 6379 # port of the initial master redis instance +redis['master_password'] = 'your-secure-password-here' # the same value defined in redis['password'] in the master instance + +sentinel['enable'] = true +# sentinel['port'] = 26379 + +## Quorum must reflect the amount of voting sentinels it take to start a failover. +sentinel['quorum'] = 2 + +## Consider unresponsive server down after x amount of ms. +# sentinel['down_after_milliseconds'] = 10000 + +# sentinel['failover_timeout'] = 60000 +``` + +When you install Sentinel in a separate machine, you need to control which +other services will be running in it. Take a look at the following variables +and enable or disable whenever it fits your strategy: + +```ruby +# Enabled Redis and Sentinel services +redis['enable'] = true +sentinel['enable'] = true + +# Disabled all other services +redis['enable'] = false +bootstrap['enable'] = false +nginx['enable'] = false +unicorn['enable'] = false +sidekiq['enable'] = false +postgresql['enable'] = false +gitlab_workhorse['enable'] = false +gitlab_rails['enable'] = false +mailroom['enable'] = false +``` + +Remember that enabling a new service may also require additional configuration +params (like `redis` for example). + --- The final part is to inform the main GitLab application server of the Redis @@ -243,7 +439,7 @@ or `gitlab-rails['redis_*']` in Omnibus): ```conf # sentinel.conf: -sentinel monitor gitlab-redis 10.10.10.10 6379 1 +sentinel monitor gitlab-redis 10.10.10.10 6379 2 sentinel down-after-milliseconds gitlab-redis 10000 sentinel config-epoch gitlab-redis 0 sentinel leader-epoch gitlab-redis 0 @@ -276,7 +472,7 @@ To make sure your configuration is correct: sudo gitlab-rails console # For source installations - sudo -u git rails console RAILS_ENV=production + sudo -u git rails console production ``` 1. Run in the console: |