diff options
Diffstat (limited to 'doc/administration/high_availability')
-rw-r--r-- | doc/administration/high_availability/redis.md | 1007 | ||||
-rw-r--r-- | doc/administration/high_availability/redis_source.md | 370 |
2 files changed, 4 insertions, 1373 deletions
diff --git a/doc/administration/high_availability/redis.md b/doc/administration/high_availability/redis.md index bad50f7ca74..2b5771f49f2 100644 --- a/doc/administration/high_availability/redis.md +++ b/doc/administration/high_availability/redis.md @@ -1,1008 +1,5 @@ --- -type: reference +redirect_to: ../redis/index.md --- -# Configuring Redis for Scaling and High Availability - -## Provide your own Redis instance **(CORE ONLY)** - -The following are the requirements for providing your own Redis instance: - -- Redis version 5.0 or higher is recommended, as this is what ships with - Omnibus GitLab packages starting with GitLab 12.7. -- Support for Redis 3.2 is deprecated with GitLab 12.10 and will be completely - removed in GitLab 13.0. -- GitLab 12.0 and later requires Redis version 3.2 or higher. Older Redis - versions do not support an optional count argument to SPOP which is now - required for [Merge Trains](../../ci/merge_request_pipelines/pipelines_for_merged_results/merge_trains/index.md). -- In addition, if Redis 4 or later is available, GitLab makes use of certain - commands like `UNLINK` and `USAGE` which were introduced only in Redis 4. -- Standalone Redis or Redis high availability with Sentinel are supported. Redis - Cluster is not supported. -- Managed Redis from cloud providers such as AWS ElastiCache will work. If these - services support high availability, be sure it is not the Redis Cluster type. - -Note the Redis node's IP address or hostname, port, and password (if required). -These will be necessary when configuring the GitLab application servers later. - -## Redis in a Scaled and Highly Available Environment - -This section is relevant for [scalable and highly available setups](../reference_architectures/index.md). - -### Provide your own Redis instance **(CORE ONLY)** - -If you want to use your own deployed Redis instance(s), -see [Provide your own Redis instance](#provide-your-own-redis-instance-core-only) -for more details. However, you can use the Omnibus GitLab package to easily -deploy the bundled Redis. - -### Standalone Redis using Omnibus GitLab **(CORE ONLY)** - -The Omnibus GitLab package can be used to configure a standalone Redis server. -In this configuration Redis is not highly available, and represents a single -point of failure. However, in a scaled environment the objective is to allow -the environment to handle more users or to increase throughput. Redis itself -is generally stable and can handle many requests so it is an acceptable -trade off to have only a single instance. See the [reference architectures](../reference_architectures/index.md) -page for an overview of GitLab scaling and high availability options. - -The steps below are the minimum necessary to configure a Redis server with -Omnibus: - -1. SSH into the Redis server. -1. [Download/install](https://about.gitlab.com/install/) the Omnibus GitLab - package you want using **steps 1 and 2** from the GitLab downloads page. - - Do not complete any other steps on the download page. - -1. Edit `/etc/gitlab/gitlab.rb` and add the contents: - - ```ruby - ## Enable Redis - redis['enable'] = true - - ## Disable all other services - sidekiq['enable'] = false - gitlab_workhorse['enable'] = false - puma['enable'] = false - postgresql['enable'] = false - nginx['enable'] = false - prometheus['enable'] = false - alertmanager['enable'] = false - pgbouncer_exporter['enable'] = false - gitlab_exporter['enable'] = false - gitaly['enable'] = false - - redis['bind'] = '0.0.0.0' - redis['port'] = 6379 - redis['password'] = 'SECRET_PASSWORD_HERE' - - gitlab_rails['enable'] = false - ``` - -1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. -1. Note the Redis node's IP address or hostname, port, and - Redis password. These will be necessary when configuring the GitLab - application servers later. -1. [Enable Monitoring](#enable-monitoring) - -Advanced configuration options are supported and can be added if -needed. - -Continue configuration of other components by going back to the -[reference architectures](../reference_architectures/index.md#configure-gitlab-to-scale) page. - -### High Availability with Omnibus GitLab **(PREMIUM ONLY)** - -> Experimental Redis Sentinel support was [introduced in GitLab 8.11](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/1877). -Starting with 8.14, Redis Sentinel is no longer experimental. -If you've used it with versions `< 8.14` before, please check the updated -documentation here. - -High Availability with [Redis](https://redis.io/) is possible using a **Master** x **Replica** -topology with a [Redis Sentinel](https://redis.io/topics/sentinel) service to watch and automatically -start the failover procedure. - -You can choose to install and manage Redis and Sentinel yourself, use -a hosted cloud solution or you can use the one that comes bundled with -Omnibus GitLab packages. - -> **Notes:** -> -> - Redis requires authentication for High Availability. See -> [Redis Security](https://redis.io/topics/security) documentation for more -> information. We recommend using a combination of a Redis password and tight -> firewall rules to secure your Redis service. -> - You are highly encouraged to read the [Redis Sentinel](https://redis.io/topics/sentinel) documentation -> before configuring Redis HA with GitLab to fully understand the topology and -> architecture. -> - This is the documentation for the Omnibus GitLab packages. For installations -> from source, follow the [Redis HA source installation](redis_source.md) guide. -> - Redis Sentinel daemon is bundled with Omnibus GitLab Enterprise Edition only. -> For configuring Sentinel with the Omnibus GitLab Community Edition and -> installations from source, read the -> [Available configuration setups](#available-configuration-setups) section -> below. - -## Overview - -Before diving into the details of setting up Redis and Redis Sentinel for HA, -make sure you read this Overview section to better understand how the components -are tied together. - -You need at least `3` independent machines: physical, or VMs running into -distinct physical machines. It is essential that all master and replica Redis -instances run in different machines. If you fail to provision the machines in -that specific way, any issue with the shared environment can bring your entire -setup down. - -It is OK to run a Sentinel alongside of a master or replica Redis instance. -There should be no more than one Sentinel on the same machine though. - -You also need to take into consideration the underlying network topology, -making sure you have redundant connectivity between Redis / Sentinel and -GitLab instances, otherwise the networks will become a single point of -failure. - -Make sure that you read this document once as a whole before configuring the -components below. - -> **Notes:** -> -> - Starting with GitLab `8.11`, you can configure a list of Redis Sentinel -> servers that will monitor a group of Redis servers to provide failover support. -> - Starting with GitLab `8.14`, the Omnibus GitLab Enterprise Edition package -> comes with Redis Sentinel daemon built-in. - -High Availability with Redis requires a few things: - -- Multiple Redis instances -- Run Redis in a **Master** x **Replica** topology -- Multiple Sentinel instances -- Application support and visibility to all Sentinel and Redis instances - -Redis Sentinel can handle the most important tasks in an HA environment and that's -to help keep servers online with minimal to no downtime. Redis Sentinel: - -- Monitors **Master** and **Replicas** instances to see if they are available -- Promotes a **Replica** to **Master** when the **Master** fails -- Demotes a **Master** to **Replica** when the failed **Master** comes back online - (to prevent data-partitioning) -- Can be queried by the application to always connect to the current **Master** - server - -When a **Master** fails to respond, it's the application's responsibility -(in our case GitLab) to handle timeout and reconnect (querying a **Sentinel** -for a new **Master**). - -To get a better understanding on how to correctly set up Sentinel, please read -the [Redis Sentinel documentation](https://redis.io/topics/sentinel) first, as -failing to configure it correctly can lead to data loss or can bring your -whole cluster down, invalidating the failover effort. - -### Recommended setup - -For a minimal setup, you will install the Omnibus GitLab package in `3` -**independent** machines, both with **Redis** and **Sentinel**: - -- Redis Master + Sentinel -- Redis Replica + Sentinel -- Redis Replica + Sentinel - -If you are not sure or don't understand why and where the amount of nodes come -from, read [Redis setup overview](#redis-setup-overview) and -[Sentinel setup overview](#sentinel-setup-overview). - -For a recommended setup that can resist more failures, you will install -the Omnibus GitLab package in `5` **independent** machines, both with -**Redis** and **Sentinel**: - -- Redis Master + Sentinel -- Redis Replica + Sentinel -- Redis Replica + Sentinel -- Redis Replica + Sentinel -- Redis Replica + Sentinel - -### Redis setup overview - -You must have at least `3` Redis servers: `1` Master, `2` Replicas, and they -need to each be on independent machines (see explanation above). - -You can have additional Redis nodes, that will help survive a situation -where more nodes goes down. Whenever there is only `2` nodes online, a failover -will not be initiated. - -As an example, if you have `6` Redis nodes, a maximum of `3` can be -simultaneously down. - -Please note that there are different requirements for Sentinel nodes. -If you host them in the same Redis machines, you may need to take -that restrictions into consideration when calculating the amount of -nodes to be provisioned. See [Sentinel setup overview](#sentinel-setup-overview) -documentation for more information. - -All Redis nodes should be configured the same way and with similar server specs, as -in a failover situation, any **Replica** can be promoted as the new **Master** by -the Sentinel servers. - -The replication requires authentication, so you need to define a password to -protect all Redis nodes and the Sentinels. They will all share the same -password, and all instances must be able to talk to -each other over the network. - -### Sentinel setup overview - -Sentinels watch both other Sentinels and Redis nodes. Whenever a Sentinel -detects that a Redis node is not responding, it will announce that to the -other Sentinels. They have to reach the **quorum**, that is the minimum amount -of Sentinels that agrees a node is down, in order to be able to start a failover. - -Whenever the **quorum** is met, the **majority** of all known Sentinel nodes -need to be available and reachable, so that they can elect the Sentinel **leader** -who will take all the decisions to restore the service availability by: - -- Promoting a new **Master** -- Reconfiguring the other **Replicas** and make them point to the new **Master** -- Announce the new **Master** to every other Sentinel peer -- Reconfigure the old **Master** and demote to **Replica** when it comes back online - -You must have at least `3` Redis Sentinel servers, and they need to -be each in an independent machine (that are believed to fail independently), -ideally in different geographical areas. - -You can configure them in the same machines where you've configured the other -Redis servers, but understand that if a whole node goes down, you loose both -a Sentinel and a Redis instance. - -The number of sentinels should ideally always be an **odd** number, for the -consensus algorithm to be effective in the case of a failure. - -In a `3` nodes topology, you can only afford `1` Sentinel node going down. -Whenever the **majority** of the Sentinels goes down, the network partition -protection prevents destructive actions and a failover **will not be started**. - -Here are some examples: - -- With `5` or `6` sentinels, a maximum of `2` can go down for a failover begin. -- With `7` sentinels, a maximum of `3` nodes can go down. - -The **Leader** election can sometimes fail the voting round when **consensus** -is not achieved (see the odd number of nodes requirement above). In that case, -a new attempt will be made after the amount of time defined in -`sentinel['failover_timeout']` (in milliseconds). - ->**Note:** -We will see where `sentinel['failover_timeout']` is defined later. - -The `failover_timeout` variable has a lot of different use cases. According to -the official documentation: - -- The time needed to re-start a failover after a previous failover was - already tried against the same master by a given Sentinel, is two - times the failover timeout. - -- The time needed for a replica replicating to a wrong master according - to a Sentinel current configuration, to be forced to replicate - with the right master, is exactly the failover timeout (counting since - the moment a Sentinel detected the misconfiguration). - -- The time needed to cancel a failover that is already in progress but - did not produced any configuration change (REPLICAOF NO ONE yet not - acknowledged by the promoted replica). - -- The maximum time a failover in progress waits for all the replicas to be - reconfigured as replicas of the new master. However even after this time - the replicas will be reconfigured by the Sentinels anyway, but not with - the exact parallel-syncs progression as specified. - -### Available configuration setups - -Based on your infrastructure setup and how you have installed GitLab, there are -multiple ways to configure Redis HA. Omnibus GitLab packages have Redis and/or -Redis Sentinel bundled with them so you only need to focus on configuration. -Pick the one that suits your needs. - -- [Installations from source](../../install/installation.md): You need to install Redis and Sentinel - yourself. Use the [Redis HA installation from source](redis_source.md) - documentation. -- [Omnibus GitLab **Community Edition** (CE) package](https://about.gitlab.com/install/?version=ce): Redis is bundled, so you - can use the package with only the Redis service enabled as described in steps - 1 and 2 of this document (works for both master and replica setups). To install - and configure Sentinel, jump directly to the Sentinel section in the - [Redis HA installation from source](redis_source.md#step-3-configuring-the-redis-sentinel-instances) documentation. -- [Omnibus GitLab **Enterprise Edition** (EE) package](https://about.gitlab.com/install/?version=ee): Both Redis and Sentinel - are bundled in the package, so you can use the EE package to set up the whole - Redis HA infrastructure (master, replica and Sentinel) which is described in - this document. -- If you have installed GitLab using the Omnibus GitLab packages (CE or EE), - but you want to use your own external Redis server, follow steps 1-3 in the - [Redis HA installation from source](redis_source.md) documentation, then go - straight to step 4 in this guide to - [set up the GitLab application](#step-4-configuring-the-gitlab-application). - -## Configuring Redis HA - -This is the section where we install and set up the new Redis instances. - -> **Notes:** -> -> - We assume that you have installed GitLab and all HA components from scratch. If you -> already have it installed and running, read how to -> [switch from a single-machine installation to Redis HA](#switching-from-an-existing-single-machine-installation-to-redis-ha). -> - Redis nodes (both master and replica) will need the same password defined in -> `redis['password']`. At any time during a failover the Sentinels can -> reconfigure a node and change its status from master to replica and vice versa. - -### Prerequisites - -The prerequisites for a HA Redis setup are the following: - -1. Provision the minimum required number of instances as specified in the - [recommended setup](#recommended-setup) section. -1. We **Do not** recommend installing Redis or Redis Sentinel in the same machines your - GitLab application is running on as this weakens your HA configuration. You can however opt in to install Redis - and Sentinel in the same machine. -1. All Redis nodes must be able to talk to each other and accept incoming - connections over Redis (`6379`) and Sentinel (`26379`) ports (unless you - change the default ones). -1. The server that hosts the GitLab application must be able to access the - Redis nodes. -1. Protect the nodes from access from external networks ([Internet](https://gitlab.com/gitlab-org/gitlab-foss/uploads/c4cc8cd353604bd80315f9384035ff9e/The_Internet_IT_Crowd.png)), using - firewall. - -### Step 1. Configuring the master Redis instance - -1. SSH into the **master** Redis server. -1. [Download/install](https://about.gitlab.com/install/) the Omnibus GitLab - package you want using **steps 1 and 2** from the GitLab downloads page. - - Make sure you select the correct Omnibus package, with the same version - and type (Community, Enterprise editions) of your current install. - - Do not complete any other steps on the download page. - -1. Edit `/etc/gitlab/gitlab.rb` and add the contents: - - ```ruby - # Specify server role as 'redis_master_role' - roles ['redis_master_role'] - - # IP address pointing to a local IP that the other machines can reach to. - # You can also set bind to '0.0.0.0' which listen in all interfaces. - # If you really need to bind to an external accessible IP, make - # sure you add extra firewall rules to prevent unauthorized access. - redis['bind'] = '10.0.0.1' - - # Define a port so Redis can listen for TCP requests which will allow other - # machines to connect to it. - redis['port'] = 6379 - - # Set up password authentication for Redis (use the same password in all nodes). - redis['password'] = 'redis-password-goes-here' - ``` - -1. Only the primary GitLab application server should handle migrations. To - prevent database migrations from running on upgrade, add the following - configuration to your `/etc/gitlab/gitlab.rb` file: - - ```ruby - gitlab_rails['auto_migrate'] = false - ``` - -1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. - -> Note: You can specify multiple roles like sentinel and Redis as: -> `roles ['redis_sentinel_role', 'redis_master_role']`. Read more about high -> availability roles at <https://docs.gitlab.com/omnibus/roles/>. - -### Step 2. Configuring the replica Redis instances - -1. SSH into the **replica** Redis server. -1. [Download/install](https://about.gitlab.com/install/) the Omnibus GitLab - package you want using **steps 1 and 2** from the GitLab downloads page. - - Make sure you select the correct Omnibus package, with the same version - and type (Community, Enterprise editions) of your current install. - - Do not complete any other steps on the download page. - -1. Edit `/etc/gitlab/gitlab.rb` and add the contents: - - ```ruby - # Specify server role as 'redis_replica_role' - roles ['redis_replica_role'] - - # IP address pointing to a local IP that the other machines can reach to. - # You can also set bind to '0.0.0.0' which listen in all interfaces. - # If you really need to bind to an external accessible IP, make - # sure you add extra firewall rules to prevent unauthorized access. - redis['bind'] = '10.0.0.2' - - # Define a port so Redis can listen for TCP requests which will allow other - # machines to connect to it. - redis['port'] = 6379 - - # The same password for Redis authentication you set up for the master node. - redis['password'] = 'redis-password-goes-here' - - # The IP of the master Redis node. - redis['master_ip'] = '10.0.0.1' - - # Port of master Redis server, uncomment to change to non default. Defaults - # to `6379`. - #redis['master_port'] = 6379 - ``` - -1. To prevent reconfigure from running automatically on upgrade, run: - - ```shell - sudo touch /etc/gitlab/skip-auto-reconfigure - ``` - -1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. -1. Go through the steps again for all the other replica nodes. - -> Note: You can specify multiple roles like sentinel and Redis as: -> `roles ['redis_sentinel_role', 'redis_replica_role']`. Read more about high -> availability roles at <https://docs.gitlab.com/omnibus/roles/>. - ---- - -These values don't have to be changed again in `/etc/gitlab/gitlab.rb` after -a failover, as the nodes will be managed by the Sentinels, and even after a -`gitlab-ctl reconfigure`, they will get their configuration restored by -the same Sentinels. - -### Step 3. Configuring the Redis Sentinel instances - ->**Note:** -Redis Sentinel is bundled with Omnibus GitLab Enterprise Edition only. The -following section assumes you are using Omnibus GitLab Enterprise Edition. -For the Omnibus Community Edition and installations from source, follow the -[Redis HA source install](redis_source.md) guide. - -NOTE: **Note:** If you are using an external Redis Sentinel instance, be sure -to exclude the `requirepass` parameter from the Sentinel -configuration. This parameter will cause clients to report `NOAUTH -Authentication required.`. [Redis Sentinel 3.2.x does not support -password authentication](https://github.com/antirez/redis/issues/3279). - -Now that the Redis servers are all set up, let's configure the Sentinel -servers. - -If you are not sure if your Redis servers are working and replicating -correctly, please read the [Troubleshooting Replication](#troubleshooting-redis-replication) -and fix it before proceeding with Sentinel setup. - -You must have at least `3` Redis Sentinel servers, and they need to -be each in an independent machine. You can configure them in the same -machines where you've configured the other Redis servers. - -With GitLab Enterprise Edition, you can use the Omnibus package to set up -multiple machines with the Sentinel daemon. - ---- - -1. SSH into the server that will host Redis Sentinel. -1. **You can omit this step if the Sentinels will be hosted in the same node as - the other Redis instances.** - - [Download/install](https://about.gitlab.com/install/) the - Omnibus GitLab Enterprise Edition package using **steps 1 and 2** from the - GitLab downloads page. - - Make sure you select the correct Omnibus package, with the same version - the GitLab application is running. - - Do not complete any other steps on the download page. - -1. Edit `/etc/gitlab/gitlab.rb` and add the contents (if you are installing the - Sentinels in the same node as the other Redis instances, some values might - be duplicate below): - - ```ruby - roles ['redis_sentinel_role'] - - # Must be the same in every sentinel node - redis['master_name'] = 'gitlab-redis' - - # The same password for Redis authentication you set up for the master node. - redis['master_password'] = 'redis-password-goes-here' - - # The IP of the master Redis node. - redis['master_ip'] = '10.0.0.1' - - # Define a port so Redis can listen for TCP requests which will allow other - # machines to connect to it. - redis['port'] = 6379 - - # Port of master Redis server, uncomment to change to non default. Defaults - # to `6379`. - #redis['master_port'] = 6379 - - ## Configure Sentinel - sentinel['bind'] = '10.0.0.1' - - # Port that Sentinel listens on, uncomment to change to non default. Defaults - # to `26379`. - # sentinel['port'] = 26379 - - ## Quorum must reflect the amount of voting sentinels it take to start a failover. - ## Value must NOT be greater then the amount of sentinels. - ## - ## The quorum can be used to tune Sentinel in two ways: - ## 1. If a the quorum is set to a value smaller than the majority of Sentinels - ## we deploy, we are basically making Sentinel more sensible to master failures, - ## triggering a failover as soon as even just a minority of Sentinels is no longer - ## able to talk with the master. - ## 1. If a quorum is set to a value greater than the majority of Sentinels, we are - ## making Sentinel able to failover only when there are a very large number (larger - ## than majority) of well connected Sentinels which agree about the master being down.s - sentinel['quorum'] = 2 - - ## Consider unresponsive server down after x amount of ms. - # sentinel['down_after_milliseconds'] = 10000 - - ## Specifies the failover timeout in milliseconds. It is used in many ways: - ## - ## - The time needed to re-start a failover after a previous failover was - ## already tried against the same master by a given Sentinel, is two - ## times the failover timeout. - ## - ## - The time needed for a replica replicating to a wrong master according - ## to a Sentinel current configuration, to be forced to replicate - ## with the right master, is exactly the failover timeout (counting since - ## the moment a Sentinel detected the misconfiguration). - ## - ## - The time needed to cancel a failover that is already in progress but - ## did not produced any configuration change (REPLICAOF NO ONE yet not - ## acknowledged by the promoted replica). - ## - ## - The maximum time a failover in progress waits for all the replica to be - ## reconfigured as replicas of the new master. However even after this time - ## the replicas will be reconfigured by the Sentinels anyway, but not with - ## the exact parallel-syncs progression as specified. - # sentinel['failover_timeout'] = 60000 - ``` - -1. To prevent database migrations from running on upgrade, run: - - ```shell - sudo touch /etc/gitlab/skip-auto-reconfigure - ``` - - Only the primary GitLab application server should handle migrations. - -1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. -1. Go through the steps again for all the other Sentinel nodes. - -### Step 4. Configuring the GitLab application - -The final part is to inform the main GitLab application server of the Redis -Sentinels servers and authentication credentials. - -You can enable or disable Sentinel support at any time in new or existing -installations. From the GitLab application perspective, all it requires is -the correct credentials for the Sentinel nodes. - -While it doesn't require a list of all Sentinel nodes, in case of a failure, -it needs to access at least one of the listed. - ->**Note:** -The following steps should be performed in the [GitLab application server](gitlab.md) -which ideally should not have Redis or Sentinels on it for a HA setup. - -1. SSH into the server where the GitLab application is installed. -1. Edit `/etc/gitlab/gitlab.rb` and add/change the following lines: - - ```ruby - ## Must be the same in every sentinel node - redis['master_name'] = 'gitlab-redis' - - ## The same password for Redis authentication you set up for the master node. - redis['master_password'] = 'redis-password-goes-here' - - ## A list of sentinels with `host` and `port` - gitlab_rails['redis_sentinels'] = [ - {'host' => '10.0.0.1', 'port' => 26379}, - {'host' => '10.0.0.2', 'port' => 26379}, - {'host' => '10.0.0.3', 'port' => 26379} - ] - ``` - -1. [Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. - -## Switching from an existing single-machine installation to Redis HA - -If you already have a single-machine GitLab install running, you will need to -replicate from this machine first, before de-activating the Redis instance -inside it. - -Your single-machine install will be the initial **Master**, and the `3` others -should be configured as **Replica** pointing to this machine. - -After replication catches up, you will need to stop services in the -single-machine install, to rotate the **Master** to one of the new nodes. - -Make the required changes in configuration and restart the new nodes again. - -To disable Redis in the single install, edit `/etc/gitlab/gitlab.rb`: - -```ruby -redis['enable'] = false -``` - -If you fail to replicate first, you may loose data (unprocessed background jobs). - -## Example of a minimal configuration with 1 master, 2 replicas and 3 Sentinels - ->**Note:** -Redis Sentinel is bundled with Omnibus GitLab Enterprise Edition only. For -different setups, read the -[available configuration setups](#available-configuration-setups) section. - -In this example we consider that all servers have an internal network -interface with IPs in the `10.0.0.x` range, and that they can connect -to each other using these IPs. - -In a real world usage, you would also set up firewall rules to prevent -unauthorized access from other machines and block traffic from the -outside (Internet). - -We will use the same `3` nodes with **Redis** + **Sentinel** topology -discussed in [Redis setup overview](#redis-setup-overview) and -[Sentinel setup overview](#sentinel-setup-overview) documentation. - -Here is a list and description of each **machine** and the assigned **IP**: - -- `10.0.0.1`: Redis Master + Sentinel 1 -- `10.0.0.2`: Redis Replica 1 + Sentinel 2 -- `10.0.0.3`: Redis Replica 2 + Sentinel 3 -- `10.0.0.4`: GitLab application - -Please note that after the initial configuration, if a failover is initiated -by the Sentinel nodes, the Redis nodes will be reconfigured and the **Master** -will change permanently (including in `redis.conf`) from one node to the other, -until a new failover is initiated again. - -The same thing will happen with `sentinel.conf` that will be overridden after the -initial execution, after any new sentinel node starts watching the **Master**, -or a failover promotes a different **Master** node. - -### Example configuration for Redis master and Sentinel 1 - -In `/etc/gitlab/gitlab.rb`: - -```ruby -roles ['redis_sentinel_role', 'redis_master_role'] -redis['bind'] = '10.0.0.1' -redis['port'] = 6379 -redis['password'] = 'redis-password-goes-here' -redis['master_name'] = 'gitlab-redis' # must be the same in every sentinel node -redis['master_password'] = 'redis-password-goes-here' # the same value defined in redis['password'] in the master instance -redis['master_ip'] = '10.0.0.1' # ip of the initial master redis instance -#redis['master_port'] = 6379 # port of the initial master redis instance, uncomment to change to non default -sentinel['bind'] = '10.0.0.1' -# sentinel['port'] = 26379 # uncomment to change default port -sentinel['quorum'] = 2 -# sentinel['down_after_milliseconds'] = 10000 -# sentinel['failover_timeout'] = 60000 -``` - -[Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. - -### Example configuration for Redis replica 1 and Sentinel 2 - -In `/etc/gitlab/gitlab.rb`: - -```ruby -roles ['redis_sentinel_role', 'redis_replica_role'] -redis['bind'] = '10.0.0.2' -redis['port'] = 6379 -redis['password'] = 'redis-password-goes-here' -redis['master_password'] = 'redis-password-goes-here' -redis['master_ip'] = '10.0.0.1' # IP of master Redis server -#redis['master_port'] = 6379 # Port of master Redis server, uncomment to change to non default -redis['master_name'] = 'gitlab-redis' # must be the same in every sentinel node -sentinel['bind'] = '10.0.0.2' -# sentinel['port'] = 26379 # uncomment to change default port -sentinel['quorum'] = 2 -# sentinel['down_after_milliseconds'] = 10000 -# sentinel['failover_timeout'] = 60000 -``` - -[Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. - -### Example configuration for Redis replica 2 and Sentinel 3 - -In `/etc/gitlab/gitlab.rb`: - -```ruby -roles ['redis_sentinel_role', 'redis_replica_role'] -redis['bind'] = '10.0.0.3' -redis['port'] = 6379 -redis['password'] = 'redis-password-goes-here' -redis['master_password'] = 'redis-password-goes-here' -redis['master_ip'] = '10.0.0.1' # IP of master Redis server -#redis['master_port'] = 6379 # Port of master Redis server, uncomment to change to non default -redis['master_name'] = 'gitlab-redis' # must be the same in every sentinel node -sentinel['bind'] = '10.0.0.3' -# sentinel['port'] = 26379 # uncomment to change default port -sentinel['quorum'] = 2 -# sentinel['down_after_milliseconds'] = 10000 -# sentinel['failover_timeout'] = 60000 -``` - -[Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. - -### Example configuration for the GitLab application - -In `/etc/gitlab/gitlab.rb`: - -```ruby -redis['master_name'] = 'gitlab-redis' -redis['master_password'] = 'redis-password-goes-here' -gitlab_rails['redis_sentinels'] = [ - {'host' => '10.0.0.1', 'port' => 26379}, - {'host' => '10.0.0.2', 'port' => 26379}, - {'host' => '10.0.0.3', 'port' => 26379} -] -``` - -[Reconfigure Omnibus GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. - -## Enable Monitoring - -> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3786) in GitLab 12.0. - -If you enable Monitoring, it must be enabled on **all** Redis servers. - -1. Make sure to collect [`CONSUL_SERVER_NODES`](../postgresql/replication_and_failover.md#consul-information), which are the IP addresses or DNS records of the Consul server nodes, for the next step. Note they are presented as `Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z` - -1. Create/edit `/etc/gitlab/gitlab.rb` and add the following configuration: - - ```ruby - # Enable service discovery for Prometheus - consul['enable'] = true - consul['monitoring_service_discovery'] = true - - # Replace placeholders - # Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z - # with the addresses of the Consul server nodes - consul['configuration'] = { - retry_join: %w(Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z), - } - - # Set the network addresses that the exporters will listen on - node_exporter['listen_address'] = '0.0.0.0:9100' - redis_exporter['listen_address'] = '0.0.0.0:9121' - ``` - -1. Run `sudo gitlab-ctl reconfigure` to compile the configuration. - -## Advanced configuration - -Omnibus GitLab configures some things behind the curtains to make the sysadmins' -lives easier. If you want to know what happens underneath keep reading. - -### Running multiple Redis clusters - -GitLab supports running [separate Redis clusters for different persistent -classes](https://docs.gitlab.com/omnibus/settings/redis.html#running-with-multiple-redis-instances): -cache, queues, and shared_state. To make this work with Sentinel: - -1. Set the appropriate variable in `/etc/gitlab/gitlab.rb` for each instance you are using: - - ```ruby - gitlab_rails['redis_cache_instance'] = REDIS_CACHE_URL - gitlab_rails['redis_queues_instance'] = REDIS_QUEUES_URL - gitlab_rails['redis_shared_state_instance'] = REDIS_SHARED_STATE_URL - ``` - - **Note**: Redis URLs should be in the format: `redis://:PASSWORD@SENTINEL_MASTER_NAME` - - 1. PASSWORD is the plaintext password for the Redis instance - 1. SENTINEL_MASTER_NAME is the Sentinel master name (e.g. `gitlab-redis-cache`) - -1. Include an array of hashes with host/port combinations, such as the following: - - ```ruby - gitlab_rails['redis_cache_sentinels'] = [ - { host: REDIS_CACHE_SENTINEL_HOST, port: PORT1 }, - { host: REDIS_CACHE_SENTINEL_HOST2, port: PORT2 } - ] - gitlab_rails['redis_queues_sentinels'] = [ - { host: REDIS_QUEUES_SENTINEL_HOST, port: PORT1 }, - { host: REDIS_QUEUES_SENTINEL_HOST2, port: PORT2 } - ] - gitlab_rails['redis_shared_state_sentinels'] = [ - { host: SHARED_STATE_SENTINEL_HOST, port: PORT1 }, - { host: SHARED_STATE_SENTINEL_HOST2, port: PORT2 } - ] - ``` - -1. Note that for each persistence class, GitLab will default to using the - configuration specified in `gitlab_rails['redis_sentinels']` unless - overridden by the settings above. -1. Be sure to include BOTH configuration options for each persistent classes. For example, - if you choose to configure a cache instance, you must specify both `gitlab_rails['redis_cache_instance']` - and `gitlab_rails['redis_cache_sentinels']` for GitLab to generate the proper configuration files. -1. Run `gitlab-ctl reconfigure` - -### Control running services - -In the previous example, we've used `redis_sentinel_role` and -`redis_master_role` which simplifies the amount of configuration changes. - -If you want more control, here is what each one sets for you automatically -when enabled: - -```ruby -## Redis Sentinel Role -redis_sentinel_role['enable'] = true - -# When Sentinel Role is enabled, the following services are also enabled -sentinel['enable'] = true - -# The following services are disabled -redis['enable'] = false -bootstrap['enable'] = false -nginx['enable'] = false -postgresql['enable'] = false -gitlab_rails['enable'] = false -mailroom['enable'] = false - -------- - -## Redis master/replica Role -redis_master_role['enable'] = true # enable only one of them -redis_replica_role['enable'] = true # enable only one of them - -# When Redis Master or Replica role are enabled, the following services are -# enabled/disabled. Note that if Redis and Sentinel roles are combined, both -# services will be enabled. - -# The following services are disabled -sentinel['enable'] = false -bootstrap['enable'] = false -nginx['enable'] = false -postgresql['enable'] = false -gitlab_rails['enable'] = false -mailroom['enable'] = false - -# For Redis Replica role, also change this setting from default 'true' to 'false': -redis['master'] = false -``` - -You can find the relevant attributes defined in [`gitlab_rails.rb`](https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/files/gitlab-cookbooks/gitlab/libraries/gitlab_rails.rb). - -## Troubleshooting - -There are a lot of moving parts that needs to be taken care carefully -in order for the HA setup to work as expected. - -Before proceeding with the troubleshooting below, check your firewall rules: - -- Redis machines - - Accept TCP connection in `6379` - - Connect to the other Redis machines via TCP in `6379` -- Sentinel machines - - Accept TCP connection in `26379` - - Connect to other Sentinel machines via TCP in `26379` - - Connect to the Redis machines via TCP in `6379` - -### Troubleshooting Redis replication - -You can check if everything is correct by connecting to each server using -`redis-cli` application, and sending the `info replication` command as below. - -```shell -/opt/gitlab/embedded/bin/redis-cli -h <redis-host-or-ip> -a '<redis-password>' info replication -``` - -When connected to a `master` Redis, you will see the number of connected -`replicas`, and a list of each with connection details: - -```plaintext -# Replication -role:master -connected_replicas:1 -replica0:ip=10.133.5.21,port=6379,state=online,offset=208037514,lag=1 -master_repl_offset:208037658 -repl_backlog_active:1 -repl_backlog_size:1048576 -repl_backlog_first_byte_offset:206989083 -repl_backlog_histlen:1048576 -``` - -When it's a `replica`, you will see details of the master connection and if -its `up` or `down`: - -```plaintext -# Replication -role:replica -master_host:10.133.1.58 -master_port:6379 -master_link_status:up -master_last_io_seconds_ago:1 -master_sync_in_progress:0 -replica_repl_offset:208096498 -replica_priority:100 -replica_read_only:1 -connected_replicas:0 -master_repl_offset:0 -repl_backlog_active:0 -repl_backlog_size:1048576 -repl_backlog_first_byte_offset:0 -repl_backlog_histlen:0 -``` - -### Troubleshooting Sentinel - -If you get an error like: `Redis::CannotConnectError: No sentinels available.`, -there may be something wrong with your configuration files or it can be related -to [this issue](https://github.com/redis/redis-rb/issues/531). - -You must make sure you are defining the same value in `redis['master_name']` -and `redis['master_pasword']` as you defined for your sentinel node. - -The way the Redis connector `redis-rb` works with sentinel is a bit -non-intuitive. We try to hide the complexity in omnibus, but it still requires -a few extra configurations. - ---- - -To make sure your configuration is correct: - -1. SSH into your GitLab application server -1. Enter the Rails console: - - ```shell - # For Omnibus installations - sudo gitlab-rails console - - # For source installations - sudo -u git rails console -e production - ``` - -1. Run in the console: - - ```ruby - redis = Redis.new(Gitlab::Redis::SharedState.params) - redis.info - ``` - - Keep this screen open and try to simulate a failover below. - -1. To simulate a failover on master Redis, SSH into the Redis server and run: - - ```shell - # port must match your master redis port, and the sleep time must be a few seconds bigger than defined one - redis-cli -h localhost -p 6379 DEBUG sleep 20 - ``` - -1. Then back in the Rails console from the first step, run: - - ```ruby - redis.info - ``` - - You should see a different port after a few seconds delay - (the failover/reconnect time). - -## Changelog - -Changes to Redis HA over time. - -**8.14** - -- Redis Sentinel support is production-ready and bundled in the Omnibus GitLab - Enterprise Edition package -- Documentation restructure for better readability - -**8.11** - -- Experimental Redis Sentinel support was added - -## Further reading - -Read more on High Availability: - -1. [High Availability Overview](README.md) -1. [Configure the database](../postgresql/replication_and_failover.md) -1. [Configure NFS](nfs.md) -1. [Configure the GitLab application servers](gitlab.md) -1. [Configure the load balancers](load_balancer.md) +This document was moved to [another location](../redis/index.md). diff --git a/doc/administration/high_availability/redis_source.md b/doc/administration/high_availability/redis_source.md index 97be480bc3b..75496638979 100644 --- a/doc/administration/high_availability/redis_source.md +++ b/doc/administration/high_availability/redis_source.md @@ -1,371 +1,5 @@ --- -type: reference +redirect_to: ../redis/replication_and_failover_external.md --- -# Configuring non-Omnibus Redis for GitLab HA - -This is the documentation for configuring a Highly Available Redis setup when -you have installed Redis all by yourself and not using the bundled one that -comes with the Omnibus packages. - -Note also that you may elect to override all references to -`/home/git/gitlab/config/resque.yml` in accordance with the advanced Redis -settings outlined in -[Configuration Files Documentation](https://gitlab.com/gitlab-org/gitlab/blob/master/config/README.md). - -We cannot stress enough the importance of reading the -[Overview section](redis.md#overview) of the Omnibus Redis HA as it provides -some invaluable information to the configuration of Redis. Please proceed to -read it before going forward with this guide. - -We also highly recommend that you use the Omnibus GitLab packages, as we -optimize them specifically for GitLab, and we will take care of upgrading Redis -to the latest supported version. - -If you're not sure whether this guide is for you, please refer to -[Available configuration setups](redis.md#available-configuration-setups) in -the Omnibus Redis HA documentation. - -## Configuring your own Redis server - -This is the section where we install and set up the new Redis instances. - -### Prerequisites - -- All Redis servers in this guide must be configured to use a TCP connection - instead of a socket. To configure Redis to use TCP connections you need to - define both `bind` and `port` in the Redis config file. You can bind to all - interfaces (`0.0.0.0`) or specify the IP of the desired interface - (e.g., one from an internal network). -- Since Redis 3.2, you must define a password to receive external connections - (`requirepass`). -- If you are using Redis with Sentinel, you will also need to define the same - password for the replica password definition (`masterauth`) in the same instance. - -In addition, read the prerequisites as described in the -[Omnibus Redis HA document](redis.md#prerequisites) since they provide some -valuable information for the general setup. - -### Step 1. Configuring the master Redis instance - -Assuming that the Redis master instance IP is `10.0.0.1`: - -1. [Install Redis](../../install/installation.md#7-redis). -1. Edit `/etc/redis/redis.conf`: - - ```conf - ## Define a `bind` address pointing to a local IP that your other machines - ## can reach you. If you really need to bind to an external accessible IP, make - ## sure you add extra firewall rules to prevent unauthorized access: - bind 10.0.0.1 - - ## Define a `port` to force redis to listen on TCP so other machines can - ## connect to it (default port is `6379`). - port 6379 - - ## Set up password authentication (use the same password in all nodes). - ## The password should be defined equal for both `requirepass` and `masterauth` - ## when setting up Redis to use with Sentinel. - requirepass redis-password-goes-here - masterauth redis-password-goes-here - ``` - -1. Restart the Redis service for the changes to take effect. - -### Step 2. Configuring the replica Redis instances - -Assuming that the Redis replica instance IP is `10.0.0.2`: - -1. [Install Redis](../../install/installation.md#7-redis). -1. Edit `/etc/redis/redis.conf`: - - ```conf - ## Define a `bind` address pointing to a local IP that your other machines - ## can reach you. If you really need to bind to an external accessible IP, make - ## sure you add extra firewall rules to prevent unauthorized access: - bind 10.0.0.2 - - ## Define a `port` to force redis to listen on TCP so other machines can - ## connect to it (default port is `6379`). - port 6379 - - ## Set up password authentication (use the same password in all nodes). - ## The password should be defined equal for both `requirepass` and `masterauth` - ## when setting up Redis to use with Sentinel. - requirepass redis-password-goes-here - masterauth redis-password-goes-here - - ## Define `replicaof` pointing to the Redis master instance with IP and port. - replicaof 10.0.0.1 6379 - ``` - -1. Restart the Redis service for the changes to take effect. -1. Go through the steps again for all the other replica nodes. - -### Step 3. Configuring the Redis Sentinel instances - -Sentinel is a special type of Redis server. It inherits most of the basic -configuration options you can define in `redis.conf`, with specific ones -starting with `sentinel` prefix. - -Assuming that the Redis Sentinel is installed on the same instance as Redis -master with IP `10.0.0.1` (some settings might overlap with the master): - -1. [Install Redis Sentinel](https://redis.io/topics/sentinel) -1. Edit `/etc/redis/sentinel.conf`: - - ```conf - ## Define a `bind` address pointing to a local IP that your other machines - ## can reach you. If you really need to bind to an external accessible IP, make - ## sure you add extra firewall rules to prevent unauthorized access: - bind 10.0.0.1 - - ## Define a `port` to force Sentinel to listen on TCP so other machines can - ## connect to it (default port is `6379`). - port 26379 - - ## Set up password authentication (use the same password in all nodes). - ## The password should be defined equal for both `requirepass` and `masterauth` - ## when setting up Redis to use with Sentinel. - requirepass redis-password-goes-here - masterauth redis-password-goes-here - - ## Define with `sentinel auth-pass` the same shared password you have - ## defined for both Redis master and replicas instances. - sentinel auth-pass gitlab-redis redis-password-goes-here - - ## Define with `sentinel monitor` the IP and port of the Redis - ## master node, and the quorum required to start a failover. - sentinel monitor gitlab-redis 10.0.0.1 6379 2 - - ## Define with `sentinel down-after-milliseconds` the time in `ms` - ## that an unresponsive server will be considered down. - sentinel down-after-milliseconds gitlab-redis 10000 - - ## Define a value for `sentinel failover_timeout` in `ms`. This has multiple - ## meanings: - ## - ## * The time needed to re-start a failover after a previous failover was - ## already tried against the same master by a given Sentinel, is two - ## times the failover timeout. - ## - ## * The time needed for a replica replicating to a wrong master according - ## to a Sentinel current configuration, to be forced to replicate - ## with the right master, is exactly the failover timeout (counting since - ## the moment a Sentinel detected the misconfiguration). - ## - ## * The time needed to cancel a failover that is already in progress but - ## did not produced any configuration change (REPLICAOF NO ONE yet not - ## acknowledged by the promoted replica). - ## - ## * The maximum time a failover in progress waits for all the replicas to be - ## reconfigured as replicas of the new master. However even after this time - ## the replicas will be reconfigured by the Sentinels anyway, but not with - ## the exact parallel-syncs progression as specified. - sentinel failover_timeout 30000 - ``` - -1. Restart the Redis service for the changes to take effect. -1. Go through the steps again for all the other Sentinel nodes. - -### Step 4. Configuring the GitLab application - -You can enable or disable Sentinel support at any time in new or existing -installations. From the GitLab application perspective, all it requires is -the correct credentials for the Sentinel nodes. - -While it doesn't require a list of all Sentinel nodes, in case of a failure, -it needs to access at least one of listed ones. - -The following steps should be performed in the [GitLab application server](gitlab.md) -which ideally should not have Redis or Sentinels in the same machine for a HA -setup: - -1. Edit `/home/git/gitlab/config/resque.yml` following the example in - [resque.yml.example](https://gitlab.com/gitlab-org/gitlab/blob/master/config/resque.yml.example), and uncomment the Sentinel lines, pointing to - the correct server credentials: - - ```yaml - # resque.yaml - production: - url: redis://:redi-password-goes-here@gitlab-redis/ - sentinels: - - - host: 10.0.0.1 - port: 26379 # point to sentinel, not to redis port - - - host: 10.0.0.2 - port: 26379 # point to sentinel, not to redis port - - - host: 10.0.0.3 - port: 26379 # point to sentinel, not to redis port - ``` - -1. [Restart GitLab](../restart_gitlab.md#installations-from-source) for the changes to take effect. - -## Example of minimal configuration with 1 master, 2 replicas and 3 Sentinels - -In this example we consider that all servers have an internal network -interface with IPs in the `10.0.0.x` range, and that they can connect -to each other using these IPs. - -In a real world usage, you would also set up firewall rules to prevent -unauthorized access from other machines, and block traffic from the -outside ([Internet](https://gitlab.com/gitlab-org/gitlab-foss/uploads/c4cc8cd353604bd80315f9384035ff9e/The_Internet_IT_Crowd.png)). - -For this example, **Sentinel 1** will be configured in the same machine as the -**Redis Master**, **Sentinel 2** and **Sentinel 3** in the same machines as the -**Replica 1** and **Replica 2** respectively. - -Here is a list and description of each **machine** and the assigned **IP**: - -- `10.0.0.1`: Redis Master + Sentinel 1 -- `10.0.0.2`: Redis Replica 1 + Sentinel 2 -- `10.0.0.3`: Redis Replica 2 + Sentinel 3 -- `10.0.0.4`: GitLab application - -Please note that after the initial configuration, if a failover is initiated -by the Sentinel nodes, the Redis nodes will be reconfigured and the **Master** -will change permanently (including in `redis.conf`) from one node to the other, -until a new failover is initiated again. - -The same thing will happen with `sentinel.conf` that will be overridden after the -initial execution, after any new sentinel node starts watching the **Master**, -or a failover promotes a different **Master** node. - -### Example configuration for Redis master and Sentinel 1 - -1. In `/etc/redis/redis.conf`: - - ```conf - bind 10.0.0.1 - port 6379 - requirepass redis-password-goes-here - masterauth redis-password-goes-here - ``` - -1. In `/etc/redis/sentinel.conf`: - - ```conf - bind 10.0.0.1 - port 26379 - sentinel auth-pass gitlab-redis redis-password-goes-here - sentinel monitor gitlab-redis 10.0.0.1 6379 2 - sentinel down-after-milliseconds gitlab-redis 10000 - sentinel failover_timeout 30000 - ``` - -1. Restart the Redis service for the changes to take effect. - -### Example configuration for Redis replica 1 and Sentinel 2 - -1. In `/etc/redis/redis.conf`: - - ```conf - bind 10.0.0.2 - port 6379 - requirepass redis-password-goes-here - masterauth redis-password-goes-here - replicaof 10.0.0.1 6379 - ``` - -1. In `/etc/redis/sentinel.conf`: - - ```conf - bind 10.0.0.2 - port 26379 - sentinel auth-pass gitlab-redis redis-password-goes-here - sentinel monitor gitlab-redis 10.0.0.1 6379 2 - sentinel down-after-milliseconds gitlab-redis 10000 - sentinel failover_timeout 30000 - ``` - -1. Restart the Redis service for the changes to take effect. - -### Example configuration for Redis replica 2 and Sentinel 3 - -1. In `/etc/redis/redis.conf`: - - ```conf - bind 10.0.0.3 - port 6379 - requirepass redis-password-goes-here - masterauth redis-password-goes-here - replicaof 10.0.0.1 6379 - ``` - -1. In `/etc/redis/sentinel.conf`: - - ```conf - bind 10.0.0.3 - port 26379 - sentinel auth-pass gitlab-redis redis-password-goes-here - sentinel monitor gitlab-redis 10.0.0.1 6379 2 - sentinel down-after-milliseconds gitlab-redis 10000 - sentinel failover_timeout 30000 - ``` - -1. Restart the Redis service for the changes to take effect. - -### Example configuration of the GitLab application - -1. Edit `/home/git/gitlab/config/resque.yml`: - - ```yaml - production: - url: redis://:redi-password-goes-here@gitlab-redis/ - sentinels: - - - host: 10.0.0.1 - port: 26379 # point to sentinel, not to redis port - - - host: 10.0.0.2 - port: 26379 # point to sentinel, not to redis port - - - host: 10.0.0.3 - port: 26379 # point to sentinel, not to redis port - ``` - -1. [Restart GitLab](../restart_gitlab.md#installations-from-source) for the changes to take effect. - -## Troubleshooting - -We have a more detailed [Troubleshooting](redis.md#troubleshooting) explained -in the documentation for Omnibus GitLab installations. Here we will list only -the things that are specific to a source installation. - -If you get an error in GitLab like `Redis::CannotConnectError: No sentinels available.`, -there may be something wrong with your configuration files or it can be related -to [this upstream issue](https://github.com/redis/redis-rb/issues/531). - -You must make sure that `resque.yml` and `sentinel.conf` are configured correctly, -otherwise `redis-rb` will not work properly. - -The `master-group-name` (`gitlab-redis`) defined in (`sentinel.conf`) -**must** be used as the hostname in GitLab (`resque.yml`): - -```conf -# sentinel.conf: -sentinel monitor gitlab-redis 10.0.0.1 6379 2 -sentinel down-after-milliseconds gitlab-redis 10000 -sentinel config-epoch gitlab-redis 0 -sentinel leader-epoch gitlab-redis 0 -``` - -```yaml -# resque.yaml -production: - url: redis://:myredispassword@gitlab-redis/ - sentinels: - - - host: 10.0.0.1 - port: 26379 # point to sentinel, not to redis port - - - host: 10.0.0.2 - port: 26379 # point to sentinel, not to redis port - - - host: 10.0.0.3 - port: 26379 # point to sentinel, not to redis port -``` - -When in doubt, please read [Redis Sentinel documentation](https://redis.io/topics/sentinel). +This document was moved to [another location](../redis/replication_and_failover_external.md). |