diff options
Diffstat (limited to 'doc/administration/operations')
-rw-r--r-- | doc/administration/operations/fast_ssh_key_lookup.md | 192 | ||||
-rw-r--r-- | doc/administration/operations/img/write_to_authorized_keys_setting.png | bin | 0 -> 94218 bytes | |||
-rw-r--r-- | doc/administration/operations/index.md | 3 | ||||
-rw-r--r-- | doc/administration/operations/speed_up_ssh.md | 1 |
4 files changed, 195 insertions, 1 deletions
diff --git a/doc/administration/operations/fast_ssh_key_lookup.md b/doc/administration/operations/fast_ssh_key_lookup.md new file mode 100644 index 00000000000..b86168f935a --- /dev/null +++ b/doc/administration/operations/fast_ssh_key_lookup.md @@ -0,0 +1,192 @@ +# Fast lookup of authorized SSH keys in the database + +Regular SSH operations become slow as the number of users grows because OpenSSH +searches for a key to authorize a user via a linear search. In the worst case, +such as when the user is not authorized to access GitLab, OpenSSH will scan the +entire file to search for a key. This can take significant time and disk I/O, +which will delay users attempting to push or pull to a repository. Making +matters worse, if users add or remove keys frequently, the operating system may +not be able to cache the `authorized_keys` file, which causes the disk to be +accessed repeatedly. + +GitLab Shell solves this by providing a way to authorize SSH users via a fast, +indexed lookup in the GitLab database. This page describes how to enable the fast +lookup of authorized SSH keys. + +> **Warning:** OpenSSH version 6.9+ is required because +`AuthorizedKeysCommand` must be able to accept a fingerprint. These +instructions will break installations using older versions of OpenSSH, such as +those included with CentOS 6 as of September 2017. If you want to use this +feature for CentOS 6, follow [the instructions on how to build and install a custom OpenSSH package](#compiling-a-custom-version-of-openssh-for-centos-6) before continuing. + +## Setting up fast lookup via GitLab Shell + +GitLab Shell provides a way to authorize SSH users via a fast, indexed lookup +to the GitLab database. GitLab Shell uses the fingerprint of the SSH key to +check whether the user is authorized to access GitLab. + +Create the directory `/opt/gitlab-shell` first: + +```bash +sudo mkdir -p /opt/gitlab-shell +``` + +Create this file at `/opt/gitlab-shell/authorized_keys`: + +``` +#!/bin/bash + +if [[ "$1" == "git" ]]; then + /opt/gitlab/embedded/service/gitlab-shell/bin/authorized_keys $2 +fi +``` + +Set appropriate ownership and permissions: + +``` +sudo chown root:git /opt/gitlab-shell/authorized_keys +sudo chmod 0650 /opt/gitlab-shell/authorized_keys +``` + +Add the following to `/etc/ssh/sshd_config` or to `/assets/sshd_config` if you +are using Omnibus Docker: + +``` +AuthorizedKeysCommand /opt/gitlab-shell/authorized_keys %u %k +AuthorizedKeysCommandUser git +``` + +Reload OpenSSH: + +```bash +# Debian or Ubuntu installations +sudo service ssh reload + +# CentOS installations +sudo service sshd reload +``` + +Confirm that SSH is working by removing your user's SSH key in the UI, adding a +new one, and attempting to pull a repo. + +> **Warning:** Do not disable writes until SSH is confirmed to be working +perfectly because the file will quickly become out-of-date. + +In the case of lookup failures (which are not uncommon), the `authorized_keys` +file will still be scanned. So git SSH performance will still be slow for many +users as long as a large file exists. + +You can disable any more writes to the `authorized_keys` file by unchecking +`Write to "authorized_keys" file` in the Application Settings of your GitLab +installation. + +![Write to authorized keys setting](img/write_to_authorized_keys_setting.png) + +Again, confirm that SSH is working by removing your user's SSH key in the UI, +adding a new one, and attempting to pull a repo. + +Then you can backup and delete your `authorized_keys` file for best performance. + +## How to go back to using the `authorized_keys` file + +This is a brief overview. Please refer to the above instructions for more context. + +1. [Rebuild the `authorized_keys` file](../raketasks/maintenance.md#rebuild-authorized_keys-file) +1. Enable writes to the `authorized_keys` file in Application Settings +1. Remove the `AuthorizedKeysCommand` lines from `/etc/ssh/sshd_config` or from `/assets/sshd_config` if you are using Omnibus Docker. +1. Reload sshd: `sudo service sshd reload` +1. Remove the `/opt/gitlab-shell/authorized_keys` file + +## Compiling a custom version of OpenSSH for CentOS 6 + +Building a custom version of OpenSSH is not necessary for Ubuntu 16.04 users, +since Ubuntu 16.04 ships with OpenSSH 7.2. + +It is also unnecessary for CentOS 7.4 users, as that version ships with +OpenSSH 7.4. If you are using CentOS 7.0 - 7.3, we strongly recommend that you +upgrade to CentOS 7.4 instead of following this procedure. This should be as +simple as running `yum update`. + +CentOS 6 users must build their own OpenSSH package to enable SSH lookups via +the database. The following instructions can be used to build OpenSSH 7.5: + +1. First, download the package and install the required packages: + + ``` + sudo su - + cd /tmp + curl --remote-name https://mirrors.evowise.com/pub/OpenBSD/OpenSSH/portable/openssh-7.5p1.tar.gz + tar xzvf openssh-7.5p1.tar.gz + yum install rpm-build gcc make wget openssl-devel krb5-devel pam-devel libX11-devel xmkmf libXt-devel + ``` + +3. Prepare the build by copying files to the right place: + + ``` + mkdir -p /root/rpmbuild/{SOURCES,SPECS} + cp ./openssh-7.5p1/contrib/redhat/openssh.spec /root/rpmbuild/SPECS/ + cp openssh-7.5p1.tar.gz /root/rpmbuild/SOURCES/ + cd /root/rpmbuild/SPECS + ``` + +3. Next, set the spec settings properly: + + ``` + sed -i -e "s/%define no_gnome_askpass 0/%define no_gnome_askpass 1/g" openssh.spec + sed -i -e "s/%define no_x11_askpass 0/%define no_x11_askpass 1/g" openssh.spec + sed -i -e "s/BuildPreReq/BuildRequires/g" openssh.spec + ``` + +3. Build the RPMs: + + ``` + rpmbuild -bb openssh.spec + ``` + +4. Ensure the RPMs were built: + + ``` + ls -al /root/rpmbuild/RPMS/x86_64/ + ``` + + You should see something as the following: + + ``` + total 1324 + drwxr-xr-x. 2 root root 4096 Jun 20 19:37 . + drwxr-xr-x. 3 root root 19 Jun 20 19:37 .. + -rw-r--r--. 1 root root 470828 Jun 20 19:37 openssh-7.5p1-1.x86_64.rpm + -rw-r--r--. 1 root root 490716 Jun 20 19:37 openssh-clients-7.5p1-1.x86_64.rpm + -rw-r--r--. 1 root root 17020 Jun 20 19:37 openssh-debuginfo-7.5p1-1.x86_64.rpm + -rw-r--r--. 1 root root 367516 Jun 20 19:37 openssh-server-7.5p1-1.x86_64.rpm + ``` + +5. Install the packages. OpenSSH packages will replace `/etc/pam.d/sshd` + with its own version, which may prevent users from logging in, so be sure + that the file is backed up and restored after installation: + + ``` + timestamp=$(date +%s) + cp /etc/pam.d/sshd pam-ssh-conf-$timestamp + rpm -Uvh /root/rpmbuild/RPMS/x86_64/*.rpm + yes | cp pam-ssh-conf-$timestamp /etc/pam.d/sshd + ``` + +6. Verify the installed version. In another window, attempt to login to the server: + + ``` + ssh -v <your-centos-machine> + ``` + + You should see a line that reads: "debug1: Remote protocol version 2.0, remote software version OpenSSH_7.5" + + If not, you may need to restart sshd (e.g. `systemctl restart sshd.service`). + +7. *IMPORTANT!* Open a new SSH session to your server before exiting to make + sure everything is working! If you need to downgrade, simple install the + older package: + + ``` + # Only run this if you run into a problem logging in + yum downgrade openssh-server openssh openssh-clients + ``` diff --git a/doc/administration/operations/img/write_to_authorized_keys_setting.png b/doc/administration/operations/img/write_to_authorized_keys_setting.png Binary files differnew file mode 100644 index 00000000000..232765f1917 --- /dev/null +++ b/doc/administration/operations/img/write_to_authorized_keys_setting.png diff --git a/doc/administration/operations/index.md b/doc/administration/operations/index.md index 320d71a9527..5655b7efec6 100644 --- a/doc/administration/operations/index.md +++ b/doc/administration/operations/index.md @@ -13,4 +13,5 @@ by GitLab to another file system or another server. that to prioritize important jobs. - [Sidekiq MemoryKiller](sidekiq_memory_killer.md): Configure Sidekiq MemoryKiller to restart Sidekiq. -- [Unicorn](unicorn.md): Understand Unicorn and unicorn-worker-killer.
\ No newline at end of file +- [Unicorn](unicorn.md): Understand Unicorn and unicorn-worker-killer. +- [Speed up SSH operations](fast_ssh_key_lookup.md): Authorize SSH users via a fast, indexed lookup to the GitLab database. diff --git a/doc/administration/operations/speed_up_ssh.md b/doc/administration/operations/speed_up_ssh.md new file mode 100644 index 00000000000..89265b3018b --- /dev/null +++ b/doc/administration/operations/speed_up_ssh.md @@ -0,0 +1 @@ +This document was moved to [another location](fast_ssh_key_lookup.md). |