diff options
Diffstat (limited to 'doc/ci/docker/using_docker_images.md')
-rw-r--r-- | doc/ci/docker/using_docker_images.md | 268 |
1 files changed, 185 insertions, 83 deletions
diff --git a/doc/ci/docker/using_docker_images.md b/doc/ci/docker/using_docker_images.md index 2f0ca19cd0f..6551d47b697 100644 --- a/doc/ci/docker/using_docker_images.md +++ b/doc/ci/docker/using_docker_images.md @@ -1,16 +1,25 @@ # Using Docker Images -GitLab CI can use [Docker Engine](https://www.docker.com/) to build projects. -Docker is an open-source project that allows to use predefined images to run applications -in independent "containers" that are run within a single Linux instance. -[Docker Hub](https://registry.hub.docker.com/) have rich database of built images that can be used to build applications. +GitLab CI can use [Docker Engine](https://www.docker.com/) to build projects. -Docker when used with GitLab CI runs each build in separate and isolated container using predefined image and always from scratch. -It makes it easier to have simple and reproducible build environment that can also be run on your workstation. -This allows you to test all commands from your shell, rather than having to test them on a CI server. +Docker is an open-source project that allows to use predefined images to run +applications in independent "containers" that are run within a single Linux +instance. [Docker Hub][hub] has a rich database of prebuilt images that can be +used to test and build your applications. -### Register Docker runner -To use GitLab Runner with Docker you need to register new runner to use `docker` executor: +Docker, when used with GitLab CI, runs each build in a separate and isolated +container using the predefined image that is set up in `.gitlab-ci.yml`. The +container is always euphemeral which means you get only one container per build. + +This makes it easier to have a simple and reproducible build environment that +can also run on your workstation. The added benefit is that you can test all +the commands that we will explore later from your shell, rather than having to +test them on a CI server. + +### Register docker runner + +To use GitLab Runner with docker you need to register a new runner to use the +`docker` executor: ```bash gitlab-ci-multi-runner register \ @@ -23,45 +32,70 @@ gitlab-ci-multi-runner register \ --docker-mysql latest ``` -**The registered runner will use `ruby:2.1` image and will run two services (`postgres:latest` and `mysql:latest`) that will be accessible for time of the build.** +The registered runner will use the `ruby:2.1` docker image and will run two +services, `postgres:latest` and `mysql:latest`, both of which will be +accessible during the build process. + +### What is image + +The `image` keyword is the name of the docker image that is present in the +local Docker Engine (list all images with `docker images`) or any image that +can be found at [Docker Hub][hub]. For more information about images and Docker +Hub please read the [Docker Fundamentals][] documentation. + +In short, with `image` we refer to the docker image, which will be used to +create a container on which your build will run. + +### What is service -### What is image? -The image is the name of any repository that is present in local Docker Engine or any repository that can be found at [Docker Hub](https://registry.hub.docker.com/). -For more information about the image and Docker Hub please read the [Docker Fundamentals](https://docs.docker.com/introduction/understanding-docker/). +The `service` keyword defines just another docker image that is run during +your build and is linked to the docker image that the `image` keyword defines. +This allows you to access the service image during build time. -### What is service? -Service is just another image that is run for time of your build and is linked to your build. This allows you to access the service image during build time. -The service image can run any application, but most common use case is to run some database container, ie.: `mysql`. -It's easier and faster to use existing image, run it as additional container than install `mysql` every time project is built. +The service image can run any application, but the most common use case is to +run a database container, eg. `mysql`. It's easier and faster to use an +existing image and run it as an additional container than install `mysql` every +time the project is built. -#### How is service linked to the build? -There's good document that describes how Docker linking works: [Linking containers together](https://docs.docker.com/userguide/dockerlinks/). -To summarize: if you add `mysql` as service to your application, the image will be used to create container that is linked to build container. -The service container for MySQL will be accessible under hostname `mysql`. -So, **to access your database service you have to connect to host: `mysql` instead of socket or `localhost`**. +#### How is service linked to the build -### How to use other images as services? -You are not limited to have only database services. -You can add the services to `.gitlab-ci.yml` or hand modify the `config.toml`. -You can use any image as service found at [Docker Hub](https://registry.hub.docker.com/). +To better undestand how the container linking works, read +[Linking containers together](https://docs.docker.com/userguide/dockerlinks/). + +To summarize, if you add `mysql` as service to your application, the image will +then be used to create a container that is linked to the build container. + +The service container for MySQL will be accessible under the hostname `mysql`. +So, in order to access your database service you have to connect to the host +named `mysql` instead of a socket or `localhost`. + +### How to use other images as services + +You are not limited to have only database services. You can add as many +services you need to `.gitlab-ci.yml` or manually modify `config.toml`. +Any image found at [Docker Hub][hub] can be used as a service. ### Define image and services from `.gitlab-ci.yml` -You can simply define image or list services that you want to use for the build time. -``` + +You can simply define an image that will be used for all jobs and a list of +services that you want to use during build time. + +```yaml image: ruby:2.2 services: - postgres:9.3 -before_install: +before_script: - bundle install - + test: script: - bundle exec rake spec ``` -It's possible to define image and service per-job: -``` -before_install: +It is also possible to define different images and services per job: + +```yaml +before_script: - bundle install test:2.1: @@ -80,68 +114,106 @@ test:2.2: ``` ### Define image and services in `config.toml` -Look for `[runners.docker]` section: + +Look for the `[runners.docker]` section: + ``` +... + [runners.docker] image = "ruby:2.1" services = ["mysql:latest", "postgres:latest"] + +... ``` -The image and services defined these way will be added to all builds run by that runner. +The image and services defined this way will be added to all builds run by +that runner. ### Accessing the services -For example you need `wordpress` instance to test some API integration with `Wordpress`. -You can for example use this image: [tutum/wordpress](https://registry.hub.docker.com/u/tutum/wordpress/). -``` -# .gitlab-ci.yml +Let's say that you need a Wordpress instance to test some API integration with +your application. + +You can then use for example the [tutum/wordpress][] image in your +`.gitlab-ci.yml`: + +```yaml +... + services: - tutum/wordpress:latest + +... ``` -Next time when you run your application the `tutum/wordpress` will be started -and you will have access to it from your build container under hostname: `tutum__wordpress`. +When the build is run, `tutum/wordpress` will be started and you will have +access to it from your build container under the hostname `tutum_wordpress`. + +The alias hostname for the service is made from the image name following these +rules: -Alias hostname for the service is made from the image name: -1. Everything after `:` is stripped, -2. '/' is replaced to `__`. +1. Everything after `:` is stripped +2. Backslash (`/`) is replaced with double underscores (`__`) ### Configuring services -Many services accept environment variables, which allow you to easily change database names or set account names depending on the environment. -GitLab Runner 0.5.0 and up passes all YAML-defined variables to created service containers. +Many services accept environment variables which allow you to easily change +database names or set account names depending on the environment. -1. To configure database name for [postgres](https://registry.hub.docker.com/u/library/postgres/) service, -you need to set POSTGRES_DB. +GitLab Runner 0.5.0 and up passes all YAML-defined variables to the created +service containers. - ```yaml - services: - - postgres - - variables: - POSTGRES_DB: gitlab - ``` +For all possible configuration variables check the documentation of each image +provided in their corresponding Docker hub page. -1. To use [mysql](https://registry.hub.docker.com/u/library/mysql/) service with empty password for time of build, -you need to set MYSQL_ALLOW_EMPTY_PASSWORD. +*Note: All variables will be passed to all service containers. It's not designed + to distinguish which variable should go where.* - ```yaml - services: - - mysql - - variables: - MYSQL_ALLOW_EMPTY_PASSWORD: "yes" - ``` +#### PostgreSQL service example -For other possible configuration variables check the -https://registry.hub.docker.com/u/library/mysql/ or https://registry.hub.docker.com/u/library/postgres/ -or README page for any other Docker image. +To configure the database name for [postgres][postgres-hub] service, you need +to set the `POSTGRES_DB` variable: -**Note: All variables will passed to all service containers. It's not designed to distinguish which variable should go where.** +```yaml +... + +services: +- postgres + +variables: + POSTGRES_DB: gitlab + +... +``` + +For a real example visit <https://gitlab.com/gitlab-examples/postgres>. + +#### MySQL service example + +To use the [mysql][mysql-hub] service with an empty password during the time of +build, you need to set the `MYSQL_ALLOW_EMPTY_PASSWORD` variable: + +```yaml +... + +services: +- mysql + +variables: + MYSQL_ALLOW_EMPTY_PASSWORD: "yes" + +... +``` ### How Docker integration works + +Below is a high level overview of the steps performed by docker during build +time. + 1. Create any service container: `mysql`, `postgresql`, `mongodb`, `redis`. -1. Create cache container to store all volumes as defined in `config.toml` and `Dockerfile` of build image (`ruby:2.1` as in above example). +1. Create cache container to store all volumes as defined in `config.toml` and + `Dockerfile` of build image (`ruby:2.1` as in above example). 1. Create build container and link any service container to build container. 1. Start build container and send build script to the container. 1. Run build script. @@ -151,32 +223,62 @@ or README page for any other Docker image. 1. Remove build container and all created service containers. ### How to debug a build locally -1. Create a file with build script: + +*Note: The following commands are run without root privileges. You should be +able to run docker with your regular user account.* + +First start with creating a file named `build script`: + ```bash -$ cat <<EOF > build_script +cat <<EOF > build_script git clone https://gitlab.com/gitlab-org/gitlab-ci-multi-runner.git /builds/gitlab-org/gitlab-ci-multi-runner cd /builds/gitlab-org/gitlab-ci-multi-runner -make <- or any other build step +make EOF ``` -1. Create service containers: +Here we use as an example the GitLab Runner repository which contains a +Makefile, so running `make` will execute the commands defined in the Makefile. +Your mileage may vary, so instead of `make` you could run the command which +is specific to your project. + +Then create some service containers: + ``` -$ docker run -d -n service-mysql mysql:latest -$ docker run -d -n service-postgres postgres:latest +docker run -d -n service-mysql mysql:latest +docker run -d -n service-postgres postgres:latest ``` -This will create two service containers (MySQL and PostgreSQL). -1. Create a build container and execute script in its context: +This will create two service containers, named `service-mysql` and +`service-postgres` which use the latest MySQL and PostgreSQL images +respectively. They will both run in the background (`-d`). + +Finally, create a build container by executing the `build_script` file we +created earlier: + ``` -$ docker run --name build -i --link=service-mysql:mysql --link=service-postgres:postgres ruby:2.1 /bin/bash < build_script +docker run --name build -i --link=service-mysql:mysql --link=service-postgres:postgres ruby:2.1 /bin/bash < build_script ``` -This will create build container that has two service containers linked. -The build_script is piped using STDIN to bash interpreter which executes the build script in container. -1. At the end remove all containers: +The above command will create a container named `build` that is spawned from +the `ruby:2.1` image and has two services linked to it. The `build_script` is +piped using STDIN to the bash interpreter which in turn executes the +`build_script` in the `build` container. + +When you finish testing and no longer need the containers, you can remove them +with: + ``` docker rm -f -v build service-mysql service-postgres ``` -This will forcefully (the `-f` switch) remove build container and service containers -and all volumes (the `-v` switch) that were created with the container creation. + +This will forcefully (`-f`) remove the `build` container, the two service +containers as well as all volumes (`-v`) that were created with the container +creation. + +[Docker Fundamentals]: https://docs.docker.com/engine/introduction/understanding-docker/ +[hub]: https://hub.docker.com/ +[linking-containers]: https://docs.docker.com/engine/userguide/networking/default_network/dockerlinks/ +[tutum/wordpress]: https://registry.hub.docker.com/u/tutum/wordpress/ +[postgres-hub]: https://registry.hub.docker.com/u/library/postgres/ +[mysql-hub]: https://registry.hub.docker.com/u/library/mysql/ |