diff options
Diffstat (limited to 'doc/development')
-rw-r--r-- | doc/development/elasticsearch.md | 8 | ||||
-rw-r--r-- | doc/development/testing_guide/end_to_end/index.md | 55 | ||||
-rw-r--r-- | doc/development/testing_guide/end_to_end/quick_start_guide.md | 17 | ||||
-rw-r--r-- | doc/development/testing_guide/flaky_tests.md | 7 | ||||
-rw-r--r-- | doc/development/testing_guide/review_apps.md | 66 |
5 files changed, 54 insertions, 99 deletions
diff --git a/doc/development/elasticsearch.md b/doc/development/elasticsearch.md index b6f863b8bea..758cecce315 100644 --- a/doc/development/elasticsearch.md +++ b/doc/development/elasticsearch.md @@ -7,13 +7,7 @@ the [Elasticsearch integration documentation](../integration/elasticsearch.md#en ## Deep Dive -In June 2019, Mario de la Ossa hosted a [Deep Dive] on GitLab's [Elasticsearch integration] to share his domain specific knowledge with anyone who may work in this part of the code base in the future. You can find the [recording on YouTube], and the slides on [Google Slides] and in [PDF]. Everything covered in this deep dive was accurate as of GitLab 12.0, and while specific details may have changed since then, it should still serve as a good introduction. - -[Deep Dive]: https://gitlab.com/gitlab-org/create-stage/issues/1 -[Elasticsearch integration]: ../integration/elasticsearch.md -[recording on YouTube]: https://www.youtube.com/watch?v=vrvl-tN2EaA -[Google Slides]: https://docs.google.com/presentation/d/1H-pCzI_LNrgrL5pJAIQgvLX8Ji0-jIKOg1QeJQzChug/edit -[PDF]: https://gitlab.com/gitlab-org/create-stage/uploads/c5aa32b6b07476fa8b597004899ec538/Elasticsearch_Deep_Dive.pdf +In June 2019, Mario de la Ossa hosted a [Deep Dive](https://gitlab.com/gitlab-org/create-stage/issues/1) on GitLab's [Elasticsearch integration](../integration/elasticsearch.md) to share his domain specific knowledge with anyone who may work in this part of the code base in the future. You can find the [recording on YouTube](https://www.youtube.com/watch?v=vrvl-tN2EaA), and the slides on [Google Slides](https://docs.google.com/presentation/d/1H-pCzI_LNrgrL5pJAIQgvLX8Ji0-jIKOg1QeJQzChug/edit) and in [PDF](https://gitlab.com/gitlab-org/create-stage/uploads/c5aa32b6b07476fa8b597004899ec538/Elasticsearch_Deep_Dive.pdf). Everything covered in this deep dive was accurate as of GitLab 12.0, and while specific details may have changed since then, it should still serve as a good introduction. ## Supported Versions diff --git a/doc/development/testing_guide/end_to_end/index.md b/doc/development/testing_guide/end_to_end/index.md index e2622cec6e2..443b7b06a24 100644 --- a/doc/development/testing_guide/end_to_end/index.md +++ b/doc/development/testing_guide/end_to_end/index.md @@ -9,8 +9,8 @@ together. ## How do we test GitLab? -We use [Omnibus GitLab][omnibus-gitlab] to build GitLab packages and then we -test these packages using the [GitLab QA orchestrator][gitlab-qa] tool, which is +We use [Omnibus GitLab](https://gitlab.com/gitlab-org/omnibus-gitlab) to build GitLab packages and then we +test these packages using the [GitLab QA orchestrator](https://gitlab.com/gitlab-org/gitlab-qa) tool, which is a black-box testing framework for the API and the UI. ### Testing nightly builds @@ -38,7 +38,7 @@ available for forks). Omnibus package built from your merge request's changes.** Manual action that starts end-to-end tests is also available in merge requests -in [Omnibus GitLab][omnibus-gitlab]. +in [Omnibus GitLab](https://gitlab.com/gitlab-org/omnibus-gitlab). Below you can read more about how to use it and how does it work. @@ -68,14 +68,15 @@ subgraph "gitlab-qa-mirror pipeline" 1. Developer triggers a manual action, that can be found in CE / EE merge requests. This starts a chain of pipelines in multiple projects. -1. The script being executed triggers a pipeline in [Omnibus GitLab Mirror][omnibus-gitlab-mirror] +1. The script being executed triggers a pipeline in + [Omnibus GitLab Mirror](https://gitlab.com/gitlab-org/omnibus-gitlab-mirror) and waits for the resulting status. We call this a _status attribution_. -1. GitLab packages are being built in the [Omnibus GitLab][omnibus-gitlab] +1. GitLab packages are being built in the [Omnibus GitLab](https://gitlab.com/gitlab-org/omnibus-gitlab) pipeline. Packages are then pushed to its Container Registry. 1. When packages are ready, and available in the registry, a final step in the - [Omnibus GitLab][omnibus-gitlab] pipeline, triggers a new + [Omnibus GitLab](https://gitlab.com/gitlab-org/omnibus-gitlab) pipeline, triggers a new GitLab QA pipeline (those with access can view them at `https://gitlab.com/gitlab-org/gitlab-qa-mirror/pipelines`). It also waits for a resulting status. 1. GitLab QA pulls images from the registry, spins-up containers and runs tests @@ -139,26 +140,23 @@ many of the 10 available jobs that you want to run). On every pipeline during the `test` stage, the `review-qa-smoke` job is automatically started: it runs the QA smoke suite against the -[Review App][review-apps]. +[Review App](../review_apps.md). You can also manually start the `review-qa-all`: it runs the full QA suite -against the [Review App][review-apps]. +against the [Review App](../review_apps.md). **This runs end-to-end tests against a Review App based on [the official GitLab -Helm chart][helm-chart], itself deployed with custom -[Cloud Native components][cng] built from your merge request's changes.** +Helm chart](https://gitlab.com/gitlab-org/charts/gitlab/), itself deployed with custom +[Cloud Native components](https://gitlab.com/gitlab-org/build/CNG) built from your merge request's changes.** -See [Review Apps][review-apps] for more details about Review Apps. - -[helm-chart]: https://gitlab.com/gitlab-org/charts/gitlab/ -[cng]: https://gitlab.com/gitlab-org/build/CNG +See [Review Apps](../review_apps.md) for more details about Review Apps. ## How do I run the tests? If you are not [testing code in a merge request](#testing-code-in-merge-requests), there are two main options for running the tests. If you simply want to run the existing tests against a live GitLab instance or against a pre-built docker image -you can use the [GitLab QA orchestrator][gitlab-qa-readme]. See also [examples +you can use the [GitLab QA orchestrator](https://gitlab.com/gitlab-org/gitlab-qa/tree/master/README.md). See also [examples of the test scenarios you can run via the orchestrator](https://gitlab.com/gitlab-org/gitlab-qa/blob/master/docs/what_tests_can_be_run.md#examples). On the other hand, if you would like to run against a local development GitLab @@ -173,12 +171,12 @@ Learn how to perform [tests that require special setup or consideration to run o ## How do I write tests? In order to write new tests, you first need to learn more about GitLab QA -architecture. See the [documentation about it][gitlab-qa-architecture]. +architecture. See the [documentation about it](https://gitlab.com/gitlab-org/gitlab-qa/blob/master/docs/architecture.md). -Once you decided where to put [test environment orchestration scenarios] and -[instance-level scenarios], take a look at the [GitLab QA README][instance-qa-readme], -the [GitLab QA orchestrator README][gitlab-qa-readme], and [the already existing -instance-level scenarios][instance-level scenarios]. +Once you decided where to put [test environment orchestration scenarios](https://gitlab.com/gitlab-org/gitlab-qa/tree/master/lib/gitlab/qa/scenario) and +[instance-level scenarios](https://gitlab.com/gitlab-org/gitlab-foss/tree/master/qa/qa/specs/features), take a look at the [GitLab QA README](https://gitlab.com/gitlab-org/gitlab/tree/master/qa/README.md), +the [GitLab QA orchestrator README](https://gitlab.com/gitlab-org/gitlab-qa/tree/master/README.md), and [the already existing +instance-level scenarios](https://gitlab.com/gitlab-org/gitlab-foss/tree/master/qa/qa/specs/features). Continued reading: @@ -193,18 +191,5 @@ Continued reading: You can ask question in the `#quality` channel on Slack (GitLab internal) or you can find an issue you would like to work on in -[the `gitlab` issue tracker][gitlab-issues], or -[the `gitlab-qa` issue tracker][gitlab-qa-issues]. - -[omnibus-gitlab]: https://gitlab.com/gitlab-org/omnibus-gitlab -[omnibus-gitlab-mirror]: https://gitlab.com/gitlab-org/omnibus-gitlab-mirror -[gitlab-qa]: https://gitlab.com/gitlab-org/gitlab-qa -[gitlab-qa-readme]: https://gitlab.com/gitlab-org/gitlab-qa/tree/master/README.md -[review-apps]: ../review_apps.md -[gitlab-qa-architecture]: https://gitlab.com/gitlab-org/gitlab-qa/blob/master/docs/architecture.md -[gitlab-qa-issues]: https://gitlab.com/gitlab-org/gitlab-qa/issues?label_name%5B%5D=new+scenario -[gitlab-issues]: https://gitlab.com/gitlab-org/gitlab/issues?label_name[]=QA&label_name[]=test -[test environment orchestration scenarios]: https://gitlab.com/gitlab-org/gitlab-qa/tree/master/lib/gitlab/qa/scenario -[instance-level scenarios]: https://gitlab.com/gitlab-org/gitlab-foss/tree/master/qa/qa/specs/features -[instance-qa-readme]: https://gitlab.com/gitlab-org/gitlab/tree/master/qa/README.md -[instance-qa-examples]: https://gitlab.com/gitlab-org/gitlab-foss/tree/master/qa/qa +[the `gitlab` issue tracker](https://gitlab.com/gitlab-org/gitlab/issues?label_name%5B%5D=QA&label_name%5B%5D=test), or +[the `gitlab-qa` issue tracker](https://gitlab.com/gitlab-org/gitlab-qa/issues?label_name%5B%5D=new+scenario). diff --git a/doc/development/testing_guide/end_to_end/quick_start_guide.md b/doc/development/testing_guide/end_to_end/quick_start_guide.md index c721c934033..0ae3f375284 100644 --- a/doc/development/testing_guide/end_to_end/quick_start_guide.md +++ b/doc/development/testing_guide/end_to_end/quick_start_guide.md @@ -22,10 +22,10 @@ If you don't exactly understand what we mean by **not everything needs to happen - [2.](#2-test-skeleton) Creating the skeleton of the test file (`*_spec.rb`) - [3.](#3-test-cases-mvc) The [MVC](https://about.gitlab.com/handbook/values/#minimum-viable-change-mvc) of the test cases' logic - [4.](#4-extracting-duplicated-code) Extracting duplicated code into methods -- [5.](#5-tests-pre-conditions-using-resources-and-page-objects) Tests' pre-conditions (`before :context` and `before`) using resources and [Page Objects] +- [5.](#5-tests-pre-conditions-using-resources-and-page-objects) Tests' pre-conditions (`before :context` and `before`) using resources and [Page Objects](page_objects.md) - [6.](#6-optimization) Optimizing the test suite - [7.](#7-resources) Using and implementing resources -- [8.](#8-page-objects) Moving element definitions and methods to [Page Objects] +- [8.](#8-page-objects) Moving element definitions and methods to [Page Objects](page_objects.md) ### 0. Are end-to-end tests needed? @@ -126,7 +126,7 @@ end > Notice that the test itself is simple. The most challenging part is the creation of the application state, which will be covered later. > -> The exemplified test case's MVC is not enough for the change to be merged, but it helps to build up the test logic. The reason is that we do not want to use locators directly in the tests, and tests **must** use [Page Objects] before they can be merged. This way we better separate the responsibilities, where the Page Objects encapsulate elements and methods that allow us to interact with pages, while the spec files describe the test cases in more business-related language. +> The exemplified test case's MVC is not enough for the change to be merged, but it helps to build up the test logic. The reason is that we do not want to use locators directly in the tests, and tests **must** use [Page Objects](page_objects.md) before they can be merged. This way we better separate the responsibilities, where the Page Objects encapsulate elements and methods that allow us to interact with pages, while the spec files describe the test cases in more business-related language. Below are the steps that the test covers: @@ -294,7 +294,7 @@ In the `before` block we create all the application state needed for the tests t > A project is created in the background by creating the `issue` resource. > -> When creating the [Resources], notice that when calling the `fabricate_via_api` method, we pass some attribute:values, like `title`, and `labels` for the `issue` resource; and `project` and `title` for the `label` resource. +> When creating the [Resources](resources.md), notice that when calling the `fabricate_via_api` method, we pass some attribute:values, like `title`, and `labels` for the `issue` resource; and `project` and `title` for the `label` resource. > > What's important to understand here is that by creating the application state mostly using the public APIs we save a lot of time in the test suite setup stage. > @@ -358,7 +358,7 @@ To address point 1, we changed the test implementation from two `it` blocks into **Note:** When writing this document, some code that is now merged to master was not implemented yet, but we left them here for the readers to understand the whole process of end-to-end test creation. -You can think of [Resources] as anything that can be created on GitLab CE or EE, either through the GUI, the API, or the CLI. +You can think of [Resources](resources.md) as anything that can be created on GitLab CE or EE, either through the GUI, the API, or the CLI. With that in mind, resources can be a project, an epic, an issue, a label, a commit, etc. @@ -468,7 +468,7 @@ Page Objects are used in end-to-end tests for maintenance reasons, where a page' > Page Objects are auto-loaded in the [`qa/qa.rb`](https://gitlab.com/gitlab-org/gitlab/blob/master/qa/qa.rb) file and available in all the test files (`*_spec.rb`). -Take a look at the [Page Objects] documentation. +Take a look at the [Page Objects](page_objects.md) documentation. Now, let's go back to our example. @@ -571,7 +571,7 @@ The `text_of_labels_block` method is a simple method that returns the `:labels_b #### Updates in the view (*.html.haml) and `dropdowns_helper.rb` files -Now let's change the view and the `dropdowns_helper` files to add the selectors that relate to the [Page Objects]. +Now let's change the view and the `dropdowns_helper` files to add the selectors that relate to the [Page Objects](page_objects.md). In [`app/views/shared/issuable/_sidebar.html.haml:105`](https://gitlab.com/gitlab-org/gitlab/blob/7ca12defc7a965987b162a6ebef302f95dc8867f/app/views/shared/issuable/_sidebar.html.haml#L105), add a `data: { qa_selector: 'edit_link_labels' }` data attribute. @@ -619,6 +619,3 @@ This method receives an element (`name`) and the `keys` that it will send to tha As you might remember, in the Issue Page Object we call this method like this: `send_keys_to_element(:dropdown_input_field, [label, :enter])`. With that, you should be able to start writing end-to-end tests yourself. *Congratulations!* - -[Page Objects]: page_objects.md -[Resources]: resources.md diff --git a/doc/development/testing_guide/flaky_tests.md b/doc/development/testing_guide/flaky_tests.md index a2fb5a2d4ce..1e53e92fad5 100644 --- a/doc/development/testing_guide/flaky_tests.md +++ b/doc/development/testing_guide/flaky_tests.md @@ -40,8 +40,8 @@ Quarantined tests are run on the CI in dedicated jobs that are allowed to fail: ## Automatic retries and flaky tests detection -On our CI, we use [rspec-retry] to automatically retry a failing example a few -times (see [`spec/spec_helper.rb`] for the precise retries count). +On our CI, we use [rspec-retry](https://github.com/NoRedInk/rspec-retry) to automatically retry a failing example a few +times (see [`spec/spec_helper.rb`](https://gitlab.com/gitlab-org/gitlab/blob/master/spec/spec_helper.rb) for the precise retries count). We also use a home-made `RspecFlaky::Listener` listener which records flaky examples in a JSON report file on `master` (`retrieve-tests-metadata` and @@ -52,9 +52,6 @@ This was originally implemented in: <https://gitlab.com/gitlab-org/gitlab-foss/- If you want to enable retries locally, you can use the `RETRIES` env variable. For instance `RETRIES=1 bin/rspec ...` would retry the failing examples once. -[rspec-retry]: https://github.com/NoRedInk/rspec-retry -[`spec/spec_helper.rb`]: https://gitlab.com/gitlab-org/gitlab/blob/master/spec/spec_helper.rb - ## Problems we had in the past at GitLab - [`rspec-retry` is biting us when some API specs fail](https://gitlab.com/gitlab-org/gitlab-foss/issues/29242): <https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/9825> diff --git a/doc/development/testing_guide/review_apps.md b/doc/development/testing_guide/review_apps.md index c84a5466e03..efa58cbeae3 100644 --- a/doc/development/testing_guide/review_apps.md +++ b/doc/development/testing_guide/review_apps.md @@ -44,36 +44,36 @@ subgraph "CNG-mirror pipeline" ### Detailed explanation -1. On every [pipeline][gitlab-pipeline] during the `test` stage, the - [`gitlab:assets:compile`][gitlab:assets:compile pull-cache] job is automatically started. - - Once it's done, it starts the [`review-build-cng`][review-build-cng] - manual job since the [`CNG-mirror`][cng-mirror] pipeline triggered in the +1. On every [pipeline](https://gitlab.com/gitlab-org/gitlab/pipelines/125315730) during the `test` stage, the + [`gitlab:assets:compile`](https://gitlab.com/gitlab-org/gitlab/-/jobs/467724487) job is automatically started. + - Once it's done, it starts the [`review-build-cng`](https://gitlab.com/gitlab-org/gitlab/-/jobs/467724808) + manual job since the [`CNG-mirror`](https://gitlab.com/gitlab-org/build/CNG-mirror) pipeline triggered in the following step depends on it. -1. The [`review-build-cng`][review-build-cng] job [triggers a pipeline][cng-mirror-pipeline] - in the [`CNG-mirror`][cng-mirror] project. - - The [`CNG-mirror`][cng-mirror-pipeline] pipeline creates the Docker images of +1. The [`review-build-cng`](https://gitlab.com/gitlab-org/gitlab/-/jobs/467724808) job [triggers a pipeline](https://gitlab.com/gitlab-org/build/CNG-mirror/pipelines/44364657) + in the [`CNG-mirror`](https://gitlab.com/gitlab-org/build/CNG-mirror) project. + - The [`CNG-mirror`](https://gitlab.com/gitlab-org/build/CNG-mirror/pipelines/44364657) pipeline creates the Docker images of each component (e.g. `gitlab-rails-ee`, `gitlab-shell`, `gitaly` etc.) - based on the commit from the [GitLab pipeline][gitlab-pipeline] and stores - them in its [registry][cng-mirror-registry]. - - We use the [`CNG-mirror`][cng-mirror] project so that the `CNG`, (**C**loud + based on the commit from the [GitLab pipeline](https://gitlab.com/gitlab-org/gitlab/pipelines/125315730) and stores + them in its [registry](https://gitlab.com/gitlab-org/build/CNG-mirror/container_registry). + - We use the [`CNG-mirror`](https://gitlab.com/gitlab-org/build/CNG-mirror) project so that the `CNG`, (**C**loud **N**ative **G**itLab), project's registry is not overloaded with a lot of transient Docker images. - Note that the official CNG images are built by the `cloud-native-image` - job, which runs only for tags, and triggers itself a [`CNG`][cng] pipeline. -1. Once the `test` stage is done, the [`review-deploy`][review-deploy] job - deploys the Review App using [the official GitLab Helm chart][helm-chart] to - the [`review-apps-ce`][review-apps-ce] / [`review-apps-ee`][review-apps-ee] + job, which runs only for tags, and triggers itself a [`CNG`](https://gitlab.com/gitlab-org/build/CNG) pipeline. +1. Once the `test` stage is done, the [`review-deploy`](https://gitlab.com/gitlab-org/gitlab/-/jobs/467724810) job + deploys the Review App using [the official GitLab Helm chart](https://gitlab.com/gitlab-org/charts/gitlab/) to + the [`review-apps-ce`](https://console.cloud.google.com/kubernetes/clusters/details/us-central1-a/review-apps-ce?project=gitlab-review-apps) / [`review-apps-ee`](https://console.cloud.google.com/kubernetes/clusters/details/us-central1-b/review-apps-ee?project=gitlab-review-apps) Kubernetes cluster on GCP. - The actual scripts used to deploy the Review App can be found at - [`scripts/review_apps/review-apps.sh`][review-apps.sh]. + [`scripts/review_apps/review-apps.sh`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/scripts/review_apps/review-apps.sh). - These scripts are basically - [our official Auto DevOps scripts][Auto-DevOps.gitlab-ci.yml] where the + [our official Auto DevOps scripts](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml) where the default CNG images are overridden with the images built and stored in the - [`CNG-mirror` project's registry][cng-mirror-registry]. - - Since we're using [the official GitLab Helm chart][helm-chart], this means + [`CNG-mirror` project's registry](https://gitlab.com/gitlab-org/build/CNG-mirror/container_registry). + - Since we're using [the official GitLab Helm chart](https://gitlab.com/gitlab-org/charts/gitlab/), this means you get a dedicated environment for your branch that's very close to what it would look in production. -1. Once the [`review-deploy`][review-deploy] job succeeds, you should be able to +1. Once the [`review-deploy`](https://gitlab.com/gitlab-org/gitlab/-/jobs/467724810) job succeeds, you should be able to use your Review App thanks to the direct link to it from the MR widget. To log into the Review App, see "Log into my Review App?" below. @@ -95,7 +95,7 @@ subgraph "CNG-mirror pipeline" stop a Review App manually, and is also started by GitLab once a merge request's branch is deleted after being merged. - The Kubernetes cluster is connected to the `gitlab-{ce,ee}` projects using - [GitLab's Kubernetes integration][gitlab-k8s-integration]. This basically + [GitLab's Kubernetes integration](../../user/project/clusters/index.md). This basically allows to have a link to the Review App directly from the merge request widget. @@ -119,7 +119,7 @@ that were not removed along with the Kubernetes resources. ## QA runs -On every [pipeline][gitlab-pipeline] in the `qa` stage (which comes after the +On every [pipeline](https://gitlab.com/gitlab-org/gitlab/pipelines/125315730) in the `qa` stage (which comes after the `review` stage), the `review-qa-smoke` job is automatically started and it runs the QA smoke suite. @@ -127,7 +127,7 @@ You can also manually start the `review-qa-all`: it runs the full QA suite. ## Performance Metrics -On every [pipeline][gitlab-pipeline] in the `qa` stage, the +On every [pipeline](https://gitlab.com/gitlab-org/gitlab/pipelines/125315730) in the `qa` stage, the `review-performance` job is automatically started: this job does basic browser performance testing using a [Sitespeed.io Container](../../user/project/merge_requests/browser_performance_testing.md). @@ -287,7 +287,7 @@ kubectl get cm --sort-by='{.metadata.creationTimestamp}' | grep 'review-' | grep ### Using K9s -[K9s] is a powerful command line dashboard which allows you to filter by labels. This can help identify trends with apps exceeding the [review-app resource requests](https://gitlab.com/gitlab-org/gitlab/-/blob/master/scripts/review_apps/base-config.yaml). Kubernetes will schedule pods to nodes based on resource requests and allow for CPU usage up to the limits. +[K9s](https://github.com/derailed/k9s) is a powerful command line dashboard which allows you to filter by labels. This can help identify trends with apps exceeding the [review-app resource requests](https://gitlab.com/gitlab-org/gitlab/-/blob/master/scripts/review_apps/base-config.yaml). Kubernetes will schedule pods to nodes based on resource requests and allow for CPU usage up to the limits. - In K9s you can sort or add filters by typing the `/` character - `-lrelease=<review-app-slug>` - filters down to all pods for a release. This aids in determining what is having issues in a single deployment @@ -389,27 +389,9 @@ find a way to limit it to only us.** ### Helpful command line tools -- [K9s] - enables CLI dashboard across pods and enabling filtering by labels +- [K9s](https://github.com/derailed/k9s) - enables CLI dashboard across pods and enabling filtering by labels - [Stern](https://github.com/wercker/stern) - enables cross pod log tailing based on label/field selectors -[charts-1068]: https://gitlab.com/gitlab-org/charts/gitlab/issues/1068 -[gitlab-pipeline]: https://gitlab.com/gitlab-org/gitlab/pipelines/125315730 -[gitlab:assets:compile pull-cache]: https://gitlab.com/gitlab-org/gitlab/-/jobs/467724487 -[review-build-cng]: https://gitlab.com/gitlab-org/gitlab/-/jobs/467724808 -[review-deploy]: https://gitlab.com/gitlab-org/gitlab/-/jobs/467724810 -[cng-mirror]: https://gitlab.com/gitlab-org/build/CNG-mirror -[cng]: https://gitlab.com/gitlab-org/build/CNG -[cng-mirror-pipeline]: https://gitlab.com/gitlab-org/build/CNG-mirror/pipelines/44364657 -[cng-mirror-registry]: https://gitlab.com/gitlab-org/build/CNG-mirror/container_registry -[helm-chart]: https://gitlab.com/gitlab-org/charts/gitlab/ -[review-apps-ce]: https://console.cloud.google.com/kubernetes/clusters/details/us-central1-a/review-apps-ce?project=gitlab-review-apps -[review-apps-ee]: https://console.cloud.google.com/kubernetes/clusters/details/us-central1-b/review-apps-ee?project=gitlab-review-apps -[review-apps.sh]: https://gitlab.com/gitlab-org/gitlab/-/blob/master/scripts/review_apps/review-apps.sh -[automated_cleanup.rb]: https://gitlab.com/gitlab-org/gitlab/-/blob/master/scripts/review_apps/automated_cleanup.rb -[Auto-DevOps.gitlab-ci.yml]: https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml -[gitlab-k8s-integration]: ../../user/project/clusters/index.md -[K9s]: https://github.com/derailed/k9s - --- [Return to Testing documentation](index.md) |