diff options
Diffstat (limited to 'doc/user/project/repository/repository_mirroring.md')
-rw-r--r-- | doc/user/project/repository/repository_mirroring.md | 636 |
1 files changed, 5 insertions, 631 deletions
diff --git a/doc/user/project/repository/repository_mirroring.md b/doc/user/project/repository/repository_mirroring.md index 5a02a35fce1..8fbe5aec6a3 100644 --- a/doc/user/project/repository/repository_mirroring.md +++ b/doc/user/project/repository/repository_mirroring.md @@ -1,635 +1,9 @@ --- -stage: Create -group: Source Code -info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments -disqus_identifier: 'https://docs.gitlab.com/ee/workflow/repository_mirroring.html' +redirect_to: 'mirror/index.md' +remove_date: '2022-03-22' --- -# Repository mirroring **(FREE)** +This document was moved to [another location](mirror/index.md). -Repository mirroring allows for the mirroring of repositories to and from external sources. You -can use it to mirror branches, tags, and commits between repositories. It helps you use -a repository outside of GitLab. - -A repository mirror at GitLab updates automatically. You can also manually trigger an update: - -- At most once every five minutes on GitLab.com. -- According to a [limit set by the administrator](../../../administration/instance_limits.md#pull-mirroring-interval) - on self-managed instances. - -There are two kinds of repository mirroring supported by GitLab: - -- [Push](#push-to-a-remote-repository): for mirroring a GitLab repository to another location. -- [Pull](#pull-from-a-remote-repository): for mirroring a repository from another location to GitLab. - -When the mirror repository is updated, all new branches, tags, and commits are visible in the -project's activity feed. - -Users with the [Maintainer role](../../permissions.md) for the project can also force an -immediate update, unless: - -- The mirror is already being updated. -- The [limit for pull mirroring interval seconds](../../../administration/instance_limits.md#pull-mirroring-interval) has not elapsed since its last update. - -For security reasons, the URL to the original repository is only displayed to users with the -[Maintainer role](../../permissions.md) or the [Owner role](../../permissions.md) for the mirrored -project. - -## Use cases - -The following are some possible use cases for repository mirroring: - -- You migrated to GitLab but still need to keep your project in another source. In that case, you - can set it up to mirror to GitLab (pull) and all the essential history of commits, tags, - and branches are available in your GitLab instance. **(PREMIUM)** -- You have old projects in another source that you don't use actively anymore, but don't want to - remove for archiving purposes. In that case, you can create a push mirror so that your active - GitLab repository can push its changes to the old location. -- You are a GitLab self-managed user for privacy reasons and your instance is closed to the public, - but you still have certain software components that you want open sourced. In this case, utilizing - GitLab to be your primary repository which is closed from the public, and using push mirroring to a - GitLab.com repository that's public, allows you to open source specific projects and contribute back - to the open source community. - -## Push to a remote repository - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/40137) in GitLab 13.5: LFS support over HTTPS. - -For an existing project, you can set up push mirroring as follows: - -1. In your project, go to **Settings > Repository**, and then expand the **Mirroring repositories** section. -1. Enter a repository URL. -1. In the **Mirror direction** dropdown, select **Push**. -1. Select an authentication method from the **Authentication method** dropdown. - You can authenticate with either a password or an [SSH key](#ssh-authentication). -1. Select the **Only mirror protected branches** checkbox, if necessary. -1. Select the **Keep divergent refs** checkbox, if desired. -1. Select **Mirror repository** to save the configuration. - -When push mirroring is enabled, only push commits directly to the mirrored repository to prevent the -mirror diverging. - -Unlike [pull mirroring](#how-it-works), the mirrored repository is not periodically auto-synced. -The mirrored repository receives all changes only when: - -- Commits are pushed to GitLab. -- A [forced update](#force-an-update) is initiated. - -Changes pushed to files in the repository are automatically pushed to the remote mirror at least: - -- Within five minutes of being received. -- Within one minute if **Only mirror protected branches** is enabled. - -In the case of a diverged branch, an error displays in the **Mirroring repositories** -section. - -### Configure push mirrors through the API - -You can also create and modify project push mirrors through the -[remote mirrors API](../../../api/remote_mirrors.md). - -### Keep divergent refs - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/208828) in GitLab 13.0. - -By default, if any ref (branch or tag) on the remote mirror has diverged from the local repository, the local differences are forced to the remote. - -For example, if a repository has `main` and `develop` branches that -have been mirrored to a remote, and then a new commit is added to `develop` on -the remote mirror. The next push updates all of the references on the remote mirror to match -the local repository, and the new commit added to the remote `develop` branch is lost. - -With the **Keep divergent refs** option enabled, the `develop` branch is -skipped, causing only `main` to be updated. The mirror status -reflects that `develop` has diverged and was skipped, and be marked as a -failed update. Refs that exist in the mirror repository but not in the local -repository are left untouched. - -NOTE: -After the mirror is created, this option can only be modified via the [API](../../../api/remote_mirrors.md). - -### Set up a push mirror from GitLab to GitHub - -To set up a mirror from GitLab to GitHub, you need to follow these steps: - -1. Create a [GitHub personal access token](https://docs.github.com/en/github/authenticating-to-github/keeping-your-account-and-data-secure/creating-a-personal-access-token) with the `public_repo` box checked. -1. Fill in the **Git repository URL** field using this format: `https://<your_github_username>@github.com/<your_github_group>/<your_github_project>.git`. -1. Fill in **Password** field with your GitHub personal access token. -1. Select **Mirror repository**. - -The mirrored repository is listed. For example, `https://*****:*****@github.com/<your_github_group>/<your_github_project>.git`. - -The repository pushes shortly thereafter. To force a push, select the **Update now** (**{retry}**) button. - -### Set up a push mirror from GitLab to AWS CodeCommit - -AWS CodeCommit push mirroring is the best way to connect GitLab repositories to -AWS CodePipeline, as GitLab isn't yet supported as one of their Source Code Management (SCM) providers. - -Each new AWS CodePipeline needs significant AWS infrastructure setup. It also -requires an individual pipeline per branch. - -If AWS CodeDeploy is the final step of a CodePipeline, you can, instead, leverage -GitLab CI/CD pipelines and use the AWS CLI in the final job in `.gitlab-ci.yml` -to deploy to CodeDeploy. - -NOTE: -GitLab-to-AWS-CodeCommit push mirroring cannot use SSH authentication until [GitLab issue 34014](https://gitlab.com/gitlab-org/gitlab/-/issues/34014) is resolved. - -To set up a mirror from GitLab to AWS CodeCommit: - -1. In the AWS IAM console, create an IAM user. -1. Add the following least privileges permissions for repository mirroring as an "inline policy". - - The Amazon Resource Names (ARNs) must explicitly include the region and account. The IAM policy - below grants privilege for mirroring access to two sample repositories. These permissions have - been tested to be the minimum (least privileged) required for mirroring: - - ```json - { - "Version": "2012-10-17", - "Statement": [ - { - "Sid": "MinimumGitLabPushMirroringPermissions", - "Effect": "Allow", - "Action": [ - "codecommit:GitPull", - "codecommit:GitPush" - ], - "Resource": [ - "arn:aws:codecommit:us-east-1:111111111111:MyDestinationRepo", - "arn:aws:codecommit:us-east-1:111111111111:MyDemo*" - ] - } - ] - } - ``` - -1. After the user was created, select the AWS IAM user name. -1. Select the **Security credentials** tab. -1. Under **HTTPS Git credentials for AWS CodeCommit** select **Generate credentials**. - - NOTE: - This Git user ID and password is specific to communicating with CodeCommit. Do - not confuse it with the IAM user ID or AWS keys of this user. - -1. Copy or download special Git HTTPS user ID and password. -1. In the AWS CodeCommit console, create a new repository to mirror from your GitLab repository. -1. Open your new repository, and then select **Clone URL > Clone HTTPS** (not **Clone HTTPS (GRC)**). -1. In GitLab, open the repository to be push-mirrored. -1. Go to **Settings > Repository**, and then expand **Mirroring repositories**. -1. Fill in the **Git repository URL** field using this format: - - ```plaintext - https://<your_aws_git_userid>@git-codecommit.<aws-region>.amazonaws.com/v1/repos/<your_codecommit_repo> - ``` - - Replace `<your_aws_git_userid>` with the AWS **special HTTPS Git user ID** from the IAM Git - credentials created earlier. Replace `<your_codecommit_repo>` with the name of your repository in CodeCommit. - -1. For **Mirror direction**, select **Push**. -1. For **Authentication method**, select **Password** and fill in the **Password** field with the special IAM Git clone user ID **password** created earlier in AWS. -1. The option **Only mirror protected branches** should be good for CodeCommit as it pushes more - frequently (from every five minutes to every minute). - CodePipeline requires individual pipeline setups for named branches you wish to have a AWS CI setup for. Because feature branches that have dynamic names are unsupported, configuring **Only mirror protected branches** doesn't cause flexibility problems with CodePipeline integration as long as you are also willing to protect all the named branches you want to build CodePipelines for. - -1. Select **Mirror repository**. You should see the mirrored repository appear: - - ```plaintext - https://*****:*****@git-codecommit.<aws-region>.amazonaws.com/v1/repos/<your_codecommit_repo> - ``` - -To test mirroring by forcing a push, select the half-circle arrows button (hover text is **Update now**). -If **Last successful update** shows a date, you have configured mirroring correctly. -If it isn't working correctly, a red `error` tag appears and shows the error message as hover text. - -### Set up a push mirror to another GitLab instance with 2FA activated - -1. On the destination GitLab instance, create a [personal access token](../../profile/personal_access_tokens.md) with `write_repository` scope. -1. On the source GitLab instance: - 1. Fill in the **Git repository URL** field using this format: `https://oauth2@<destination host>/<your_gitlab_group_or_name>/<your_gitlab_project>.git`. - 1. Fill in the **Password** field with the GitLab personal access token created on the destination GitLab instance. - 1. Select **Mirror repository**. - -## Pull from a remote repository **(PREMIUM)** - -> - [Added Git LFS support](https://gitlab.com/gitlab-org/gitlab/-/issues/10871) in GitLab 11.11. -> - Moved to GitLab Premium in 13.9. - -You can set up a repository to automatically have its branches, tags, and commits updated from an -upstream repository. - -If a repository you're interested in is located on a different server, and you want -to browse its content and its activity using the GitLab interface, you can configure -mirror pulling: - -1. If your remote repository is on GitHub and you have - [two-factor authentication (2FA) configured](https://docs.github.com/en/github/authenticating-to-github/securing-your-account-with-two-factor-authentication-2fa), - create a [personal access token for GitHub](https://docs.github.com/en/github/authenticating-to-github/keeping-your-account-and-data-secure/creating-a-personal-access-token). - with the `repo` scope. If 2FA is enabled, this personal access - token serves as your GitHub password. -1. In your project, go to **Settings > Repository**, and then expand the - **Mirroring repositories** section. -1. In the **Git repository URL** field, enter a repository URL. Include the username - in the URL if required: `https://MYUSERNAME@github.com/group/PROJECTNAME.git` -1. In the **Mirror direction** dropdown, select **Pull**. -1. In the **Authentication method** dropdown, select your authentication method. -1. Select from the following checkboxes, if needed: - - **Overwrite diverged branches** - - **Trigger pipelines for mirror updates** - - **Only mirror protected branches** -1. Select **Mirror repository** to save the configuration. - -Because GitLab is now set to pull changes from the upstream repository, you should not push commits -directly to the repository on GitLab. Instead, any commits should be pushed to the remote repository. -Changes pushed to the remote repository are pulled into the GitLab repository, either: - -- Automatically in a certain period of time. -- When a [forced update](#force-an-update) is initiated. - -WARNING: -If you do manually update a branch in the GitLab repository, the branch becomes diverged from -upstream, and GitLab no longer automatically updates this branch to prevent any changes from being lost. -Deleted branches and tags in the upstream repository are not reflected in the GitLab repository. - -### How it works - -After the pull mirroring feature has been enabled for a repository, the repository is added to a queue. - -Once per minute, a Sidekiq cron job schedules repository mirrors to update, based on: - -- The capacity available. This is determined by Sidekiq settings. For GitLab.com, see [GitLab.com Sidekiq settings](../../gitlab_com/index.md#sidekiq). -- The number of repository mirrors already in the queue that are due to be updated. Being due depends on when the repository mirror was last updated and how many times it's been retried. - -Repository mirrors are updated as Sidekiq becomes available to process them. If the process of updating the repository mirror: - -- **Succeeds**: An update is enqueued again with at least a 30 minute wait. -- **Fails**: (For example, a branch diverged from upstream.), The update attempted again later. Mirrors can fail - up to 14 times before they are no longer enqueued for updates. - -### Overwrite diverged branches **(PREMIUM)** - -> Moved to GitLab Premium in 13.9. - -You can choose to always update your local branches with remote versions, even if they have -diverged from the remote. - -WARNING: -For mirrored branches, enabling this option results in the loss of local changes. - -To use this option, check the **Overwrite diverged branches** box when creating a repository mirror. - -### Trigger pipelines for mirror updates **(PREMIUM)** - -> Moved to GitLab Premium in 13.9. - -If this option is enabled, pipelines trigger when branches or tags are -updated from the remote repository. Depending on the activity of the remote -repository, this may greatly increase the load on your CI runners. Only enable -this if you know they can handle the load. CI uses the credentials -assigned when you set up pull mirroring. - -### Hard failure **(PREMIUM)** - -> Moved to GitLab Premium in 13.9. - -After 14 consecutive unsuccessful retries, the mirroring process is marked as a hard failure -and mirroring attempts stop. This failure is visible in either the: - -- Project's main dashboard. -- Pull mirror settings page. - -You can resume the project mirroring again by [forcing an update](#force-an-update). - -### Trigger an update using the API **(PREMIUM)** - -> Moved to GitLab Premium in 13.9. - -Pull mirroring uses polling to detect new branches and commits added upstream, often minutes -afterwards. If you notify GitLab by [API](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project), -updates are pulled immediately. - -For more information, see [Start the pull mirroring process for a Project](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project). - -## Mirror only protected branches **(PREMIUM)** - -> Moved to GitLab Premium in 13.9. - -Based on the mirror direction that you choose, you can opt to mirror only the -[protected branches](../protected_branches.md) in the mirroring project, -either from or to your remote repository. For pull mirroring, non-protected branches in -the mirroring project are not mirrored and can diverge. - -To use this option, check the **Only mirror protected branches** box when -creating a repository mirror. **(PREMIUM)** - -## SSH authentication - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/22982) in GitLab 11.6 for Push mirroring. - -SSH authentication is mutual: - -- You have to prove to the server that you're allowed to access the repository. -- The server also has to prove to *you* that it's who it claims to be. - -You provide your credentials as a password or public key. The server that the -other repository resides on provides its credentials as a "host key", the -fingerprint of which needs to be verified manually. - -If you're mirroring over SSH (using an `ssh://` URL), you can authenticate using: - -- Password-based authentication, just as over HTTPS. -- Public key authentication. This is often more secure than password authentication, - especially when the other repository supports [deploy keys](../deploy_keys/index.md). - -To get started: - -1. In your project, go to **Settings > Repository**, and then expand the **Mirroring repositories** section. -1. Enter an `ssh://` URL for mirroring. - -NOTE: -SCP-style URLs (that is, `git@example.com:group/project.git`) are not supported at this time. - -Entering the URL adds two buttons to the page: - -- **Detect host keys**. -- **Input host keys manually**. - -If you select the: - -- **Detect host keys** button, GitLab fetches the host keys from the server and display the fingerprints. -- **Input host keys manually** button, a field is displayed where you can paste in host keys. - -Assuming you used the former, you now need to verify that the fingerprints are -those you expect. GitLab.com and other code hosting sites publish their -fingerprints in the open for you to check: - -- [AWS CodeCommit](https://docs.aws.amazon.com/codecommit/latest/userguide/regions.html#regions-fingerprints) -- [Bitbucket](https://support.atlassian.com/bitbucket-cloud/docs/configure-ssh-and-two-step-verification/) -- [GitHub](https://docs.github.com/en/github/authenticating-to-github/keeping-your-account-and-data-secure/githubs-ssh-key-fingerprints) -- [GitLab.com](../../gitlab_com/index.md#ssh-host-keys-fingerprints) -- [Launchpad](https://help.launchpad.net/SSHFingerprints) -- [Savannah](http://savannah.gnu.org/maintenance/SshAccess/) -- [SourceForge](https://sourceforge.net/p/forge/documentation/SSH%20Key%20Fingerprints/) - -Other providers vary. If you're running self-managed GitLab, or otherwise -have access to the server for the other repository, you can securely gather the -key fingerprints: - -```shell -$ cat /etc/ssh/ssh_host*pub | ssh-keygen -E md5 -l -f - -256 MD5:f4:28:9f:23:99:15:21:1b:bf:ed:1f:8e:a0:76:b2:9d root@example.com (ECDSA) -256 MD5:e6:eb:45:8a:3c:59:35:5f:e9:5b:80:12:be:7e:22:73 root@example.com (ED25519) -2048 MD5:3f:72:be:3d:62:03:5c:62:83:e8:6e:14:34:3a:85:1d root@example.com (RSA) -``` - -NOTE: -You may need to exclude `-E md5` for some older versions of SSH. - -When mirroring the repository, GitLab checks that at least one of the -stored host keys matches before connecting. This can prevent malicious code from -being injected into your mirror, or your password being stolen. - -### SSH public key authentication - -To use SSH public key authentication, you must also choose that option -from the **Authentication method** dropdown. When the mirror is created, -GitLab generates a 4096-bit RSA key that can be copied by selecting the **Copy SSH public key** button. - -![Repository mirroring copy SSH public key to clipboard button](img/repository_mirroring_copy_ssh_public_key_button.png) - -You then need to add the public SSH key to the other repository's configuration: - -- If the other repository is hosted on GitLab, you should add the public SSH key - as a [deploy key](../../project/deploy_keys/index.md). -- If the other repository is hosted elsewhere, you may need to add the key to - your user's `authorized_keys` file. Paste the entire public SSH key into the - file on its own line and save it. - -If you need to change the key at any time, you can remove and re-add the mirror -to generate a new key. Update the other repository with the new -key to keep the mirror running. - -NOTE: -The generated keys are stored in the GitLab database, not in the file system. Therefore, -SSH public key authentication for mirrors cannot be used in a pre-receive hook. - -## Force an update **(FREE)** - -While mirrors are scheduled to update automatically, you can always force an update by using the -update button which is available on the **Mirroring repositories** section of the **Repository Settings** page. - -![Repository mirroring force update user interface](img/repository_mirroring_force_update.png) - -## Bidirectional mirroring **(PREMIUM)** - -> Moved to GitLab Premium in 13.9. - -WARNING: -Bidirectional mirroring may cause conflicts. - -If you configure a GitLab repository to both pull from, and push to, the same remote source, there -is no guarantee that either repository updates correctly. If you set up a repository for -bidirectional mirroring, you should prepare for the likely conflicts by deciding who resolves -them and how. - -Rewriting any mirrored commit on either remote causes conflicts and mirroring to fail. This can -be prevented by [mirroring only protected branches](#mirror-only-protected-branches). - -You should [protect the branches](../protected_branches.md) you wish to mirror on both -remotes to prevent conflicts caused by rewriting history. - -Bidirectional mirroring also creates a race condition where commits made close together to the same -branch causes conflicts. The race condition can be mitigated by reducing the mirroring delay by using -a [Push event webhook](../integrations/webhooks.md#push-events) to trigger an immediate -pull to GitLab. Push mirroring from GitLab is rate limited to once per minute when only push mirroring -protected branches. - -### Configure a webhook to trigger an immediate pull to GitLab - -Assuming you have already configured the [push](#set-up-a-push-mirror-to-another-gitlab-instance-with-2fa-activated) -and [pull](#pull-from-a-remote-repository) mirrors in the upstream GitLab instance, to trigger an -immediate pull as suggested above, you must configure a [Push Event Web Hook](../integrations/webhooks.md#push-events) -in the downstream instance. - -To do this: - -1. Create a [personal access token](../../profile/personal_access_tokens.md) with `API` scope. -1. In your project, go to **Settings > Webhooks**. -1. Add the webhook URL which (in this case) uses the [Pull Mirror API](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project) - request to trigger an immediate pull after updates to the repository. - - ```plaintext - https://gitlab.example.com/api/v4/projects/:id/mirror/pull?private_token=<your_access_token> - ``` - -1. Ensure the **Push Events** checkbox is selected. -1. Select **Add Webhook** to save the webhook. - -To test the integration, select the **Test** button and confirm GitLab doesn't return an error message. - -### Prevent conflicts using a pre-receive hook - -WARNING: -The solution proposed negatively affects the performance of -Git push operations because they are proxied to the upstream Git -repository. - -A server-side `pre-receive` hook can be used to prevent the race condition -described above by only accepting the push after first pushing the commit to -the upstream Git repository. In this configuration one Git repository acts as -the authoritative upstream, and the other as downstream. The `pre-receive` hook -is installed on the downstream repository. - -Read about [configuring Server hooks](../../../administration/server_hooks.md) on the GitLab server. - -A sample `pre-receive` hook is provided below. - -```shell -#!/usr/bin/env bash - -# --- Assume only one push mirror target -# Push mirroring remotes are named `remote_mirror_<id>`, this finds the first remote and uses that. -TARGET_REPO=$(git remote | grep -m 1 remote_mirror) - -proxy_push() -{ - # --- Arguments - OLDREV=$(git rev-parse $1) - NEWREV=$(git rev-parse $2) - REFNAME="$3" - - # --- Pattern of branches to proxy pushes - allowlist=$(expr "$branch" : "\(master\)") - - case "$refname" in - refs/heads/*) - branch=$(expr "$refname" : "refs/heads/\(.*\)") - - if [ "$allowlist" = "$branch" ]; then - unset GIT_QUARANTINE_PATH # handle https://git-scm.com/docs/git-receive-pack#_quarantine_environment - error="$(git push --quiet $TARGET_REPO $NEWREV:$REFNAME 2>&1)" - fail=$? - - if [ "$fail" != "0" ]; then - echo >&2 "" - echo >&2 " Error: updates were rejected by upstream server" - echo >&2 " This is usually caused by another repository pushing changes" - echo >&2 " to the same ref. You may want to first integrate remote changes" - echo >&2 "" - return - fi - fi - ;; - esac -} - -# Allow dual mode: run from the command line just like the update hook, or -# if no arguments are given then run as a hook script -if [ -n "$1" -a -n "$2" -a -n "$3" ]; then - # Output to the terminal in command line mode - if someone wanted to - # resend an email; they could redirect the output to sendmail - # themselves - PAGER= proxy_push $2 $3 $1 -else - # Push is proxied upstream one ref at a time. Because of this it is possible - # for some refs to succeed, and others to fail. This will result in a failed - # push. - while read oldrev newrev refname - do - proxy_push $oldrev $newrev $refname - done -fi -``` - -Note that this sample has a few limitations: - -- This example may not work verbatim for your use case and might need modification. - - It doesn't regard different types of authentication mechanisms for the mirror. - - It doesn't work with forced updates (rewriting history). - - Only branches that match the `allowlist` patterns are proxy pushed. -- The script circumvents the Git hook quarantine environment because the update of `$TARGET_REPO` - is seen as a ref update, and Git displays warnings about it. - -### Mirror with Perforce Helix via Git Fusion **(PREMIUM)** - -> Moved to GitLab Premium in 13.9. - -WARNING: -Bidirectional mirroring should not be used as a permanent configuration. Refer to -[Migrating from Perforce Helix](../import/perforce.md) for alternative migration approaches. - -[Git Fusion](https://www.perforce.com/manuals/git-fusion/#Git-Fusion/section_avy_hyc_gl.html) provides a Git interface -to [Perforce Helix](https://www.perforce.com/products) which can be used by GitLab to bidirectionally -mirror projects with GitLab. This can help you in some situations when migrating from Perforce Helix -to GitLab where overlapping Perforce Helix workspaces cannot be migrated simultaneously to GitLab. - -If using mirroring with Perforce Helix, you should only mirror protected branches. Perforce Helix -rejects any pushes that rewrite history. Only the fewest number of branches should be mirrored -due to the performance limitations of Git Fusion. - -When configuring mirroring with Perforce Helix via Git Fusion, the following Git Fusion -settings are recommended: - -- `change-pusher` should be disabled. Otherwise, every commit is rewritten as being committed - by the mirroring account, rather than being mapped to existing Perforce Helix users or the `unknown_git` user. -- `unknown_git` user is used as the commit author if the GitLab user doesn't exist in - Perforce Helix. - -Read about [Git Fusion settings on Perforce.com](https://www.perforce.com/manuals/git-fusion/Content/Git-Fusion/section_vss_bdw_w3.html#section_zdp_zz1_3l). - -## Troubleshooting - -Should an error occur during a push, GitLab displays an **Error** highlight for that repository. Details on the error can then be seen by hovering over the highlight text. - -### 13:Received RST_STREAM with error code 2 with GitHub - -If you receive a "13:Received RST_STREAM with error code 2" message while mirroring to a GitHub repository, -your GitHub settings might be set to block pushes that expose your email address used in commits. Either -set your email address on GitHub to be public, or disable the [Block command line pushes that expose my email](https://github.com/settings/emails) setting. - -### 4:Deadline Exceeded - -When upgrading to GitLab 11.11.8 or newer, a change in how usernames are represented means that you -may need to update your mirroring username and password to ensure that `%40` characters are replaced with `@`. - -### Connection blocked because server only allows public key authentication - -As the error indicates, the connection is getting blocked between GitLab and the remote repository. Even if a -[TCP Check](../../../administration/raketasks/maintenance.md#check-tcp-connectivity-to-a-remote-site) is successful, -you must check any networking components in the route from GitLab to the remote Server to ensure there's no blockage. - -For example, we've seen this error when a Firewall was performing a `Deep SSH Inspection` on outgoing packets. - -### Could not read username: terminal prompts disabled - -If you receive this error after creating a new project using -[GitLab CI/CD for external repositories](../../../ci/ci_cd_for_external_repos/): - -```plaintext -"2:fetch remote: "fatal: could not read Username for 'https://bitbucket.org': terminal prompts disabled\n": exit status 128." -``` - -Check if the repository owner is specified in the URL of your mirrored repository: - -1. Go to your project. -1. On the left sidebar, select **Settings > Repository**. -1. Select **Mirroring repositories**. -1. If no repository owner is specified, delete and add the URL again in this format: - - ```plaintext - https://**<repo_owner>**@bitbucket.org/<accountname>/<reponame>.git - ``` - -The repository owner is needed for Bitbucket to connect to the repository for mirroring. - -### Pull mirror is missing LFS files - -In some cases, pull mirroring does not transfer LFS files. This issue occurs when: - -- You use an SSH repository URL. The workaround is to use an HTTPS repository URL instead. - There is [an issue to fix this for SSH URLs](https://gitlab.com/gitlab-org/gitlab/-/issues/11997). -- You're using GitLab 14.0 or older, and the source repository is a public Bitbucket URL. - This was [fixed in GitLab 14.0.6](https://gitlab.com/gitlab-org/gitlab/-/issues/335123). -- You mirror an external repository using object storage. - There is [an issue to fix this](https://gitlab.com/gitlab-org/gitlab/-/issues/335495). +<!-- This redirect file can be deleted after <2022-03-22>. --> +<!-- Before deletion, see: https://docs.gitlab.com/ee/development/documentation/#move-or-rename-a-page -->
\ No newline at end of file |