diff options
Diffstat (limited to 'doc')
-rw-r--r-- | doc/install/installation.md | 10 | ||||
-rw-r--r-- | doc/update/6.x-or-7.x-to-7.5.md (renamed from doc/update/6.x-or-7.x-to-7.4.md) | 28 | ||||
-rw-r--r-- | doc/update/7.4-to-7.5.md | 187 |
3 files changed, 206 insertions, 19 deletions
diff --git a/doc/install/installation.md b/doc/install/installation.md index 459a21ae821..5dd9388eece 100644 --- a/doc/install/installation.md +++ b/doc/install/installation.md @@ -101,8 +101,8 @@ Remove the old Ruby 1.8 if present Download Ruby and compile it: mkdir /tmp/ruby && cd /tmp/ruby - curl -L --progress ftp://ftp.ruby-lang.org/pub/ruby/2.1/ruby-2.1.2.tar.gz | tar xz - cd ruby-2.1.2 + curl -L --progress http://cache.ruby-lang.org/pub/ruby/2.1/ruby-2.1.5.tar.gz | tar xz + cd ruby-2.1.5 ./configure --disable-install-rdoc make sudo make install @@ -181,9 +181,9 @@ We recommend using a PostgreSQL database. For MySQL check [MySQL setup guide](da ### Clone the Source # Clone GitLab repository - sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-ce.git -b 7-4-stable gitlab + sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-ce.git -b 7-5-stable gitlab -**Note:** You can change `7-4-stable` to `master` if you want the *bleeding edge* version, but never install master on a production server! +**Note:** You can change `7-5-stable` to `master` if you want the *bleeding edge* version, but never install master on a production server! ### Configure It @@ -278,7 +278,7 @@ We recommend using a PostgreSQL database. For MySQL check [MySQL setup guide](da GitLab Shell is an SSH access and repository management software developed specially for GitLab. # Run the installation task for gitlab-shell (replace `REDIS_URL` if needed): - sudo -u git -H bundle exec rake gitlab:shell:install[v2.0.1] REDIS_URL=unix:/var/run/redis/redis.sock RAILS_ENV=production + sudo -u git -H bundle exec rake gitlab:shell:install[v2.2.0] REDIS_URL=unix:/var/run/redis/redis.sock RAILS_ENV=production # By default, the gitlab-shell config is generated from your main GitLab config. # You can review (and modify) the gitlab-shell config as follows: diff --git a/doc/update/6.x-or-7.x-to-7.4.md b/doc/update/6.x-or-7.x-to-7.5.md index dd90ae3bf3d..c9b95c62611 100644 --- a/doc/update/6.x-or-7.x-to-7.4.md +++ b/doc/update/6.x-or-7.x-to-7.5.md @@ -1,6 +1,6 @@ -# From 6.x or 7.x to 7.4 +# From 6.x or 7.x to 7.5 -This allows you to upgrade any version of GitLab from 6.0 and up (including 7.0 and up) to 7.4. +This allows you to upgrade any version of GitLab from 6.0 and up (including 7.0 and up) to 7.5. ## Global issue numbers @@ -34,7 +34,7 @@ You can check which version you are running with `ruby -v`. If you are you running Ruby 2.0.x, you do not need to upgrade ruby, but can consider doing so for performance reasons. -If you are running Ruby 2.1.1 consider upgrading to 2.1.2, because of the high memory usage of Ruby 2.1.1. +If you are running Ruby 2.1.1 consider upgrading to 2.1.5, because of the high memory usage of Ruby 2.1.1. Install, update dependencies: @@ -46,8 +46,8 @@ Download and compile Ruby: ```bash mkdir /tmp/ruby && cd /tmp/ruby -curl --progress ftp://ftp.ruby-lang.org/pub/ruby/2.1/ruby-2.1.2.tar.gz | tar xz -cd ruby-2.1.2 +curl --progress http://cache.ruby-lang.org/pub/ruby/2.1/ruby-2.1.5.tar.gz | tar xz +cd ruby-2.1.5 ./configure --disable-install-rdoc make sudo make install @@ -70,7 +70,7 @@ sudo -u git -H git checkout -- db/schema.rb # local changes will be restored aut For GitLab Community Edition: ```bash -sudo -u git -H git checkout 7-4-stable +sudo -u git -H git checkout 7-5-stable ``` OR @@ -78,7 +78,7 @@ OR For GitLab Enterprise Edition: ```bash -sudo -u git -H git checkout 7-4-stable-ee +sudo -u git -H git checkout 7-5-stable-ee ``` ## 4. Install additional packages @@ -119,7 +119,7 @@ sudo apt-get install pkg-config cmake ```bash cd /home/git/gitlab-shell sudo -u git -H git fetch -sudo -u git -H git checkout v2.0.1 +sudo -u git -H git checkout v2.2.0 ``` ## 7. Install libs, migrations, etc. @@ -154,14 +154,14 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab TIP: to see what changed in `gitlab.yml.example` in this release use next command: ``` -git diff 6-0-stable:config/gitlab.yml.example 7-4-stable:config/gitlab.yml.example +git diff 6-0-stable:config/gitlab.yml.example 7-5-stable:config/gitlab.yml.example ``` -* Make `/home/git/gitlab/config/gitlab.yml` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/config/gitlab.yml.example but with your settings. -* Make `/home/git/gitlab/config/unicorn.rb` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/config/unicorn.rb.example but with your settings. -* Make `/home/git/gitlab-shell/config.yml` the same as https://gitlab.com/gitlab-org/gitlab-shell/blob/v2.0.1/config.yml.example but with your settings. -* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/lib/support/nginx/gitlab but with your settings. -* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/lib/support/nginx/gitlab-ssl but with your settings. +* Make `/home/git/gitlab/config/gitlab.yml` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/config/gitlab.yml.example but with your settings. +* Make `/home/git/gitlab/config/unicorn.rb` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/config/unicorn.rb.example but with your settings. +* Make `/home/git/gitlab-shell/config.yml` the same as https://gitlab.com/gitlab-org/gitlab-shell/blob/v2.2.0/config.yml.example but with your settings. +* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/lib/support/nginx/gitlab but with your settings. +* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/lib/support/nginx/gitlab-ssl but with your settings. * Copy rack attack middleware config ```bash diff --git a/doc/update/7.4-to-7.5.md b/doc/update/7.4-to-7.5.md new file mode 100644 index 00000000000..737aeb9c1ab --- /dev/null +++ b/doc/update/7.4-to-7.5.md @@ -0,0 +1,187 @@ +# From 7.4 to 7.5 + +### 0. Stop server + + sudo service gitlab stop + +### 1. Backup + +```bash +cd /home/git/gitlab +sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production +``` + +### 2. Get latest code + +```bash +sudo -u git -H git fetch --all +sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically +``` + +For GitLab Community Edition: + +```bash +sudo -u git -H git checkout 7-5-stable +``` + +OR + +For GitLab Enterprise Edition: + +```bash +sudo -u git -H git checkout 7-5-stable-ee +``` + +### 3. Install libs, migrations, etc. + +```bash +cd /home/git/gitlab + +# MySQL installations (note: the line below states '--without ... postgres') +sudo -u git -H bundle install --without development test postgres --deployment + +# PostgreSQL installations (note: the line below states '--without ... mysql') +sudo -u git -H bundle install --without development test mysql --deployment + +# Run database migrations +sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production + +# Clean up assets and cache +sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS_ENV=production + +# Update init.d script +sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab +``` + +### 4. Update config files + +#### New configuration options for gitlab.yml + +There are new configuration options available for gitlab.yml. View them with the command below and apply them to your current gitlab.yml. + +``` +git diff origin/7-4-stable:config/gitlab.yml.example origin/7-5-stable:config/gitlab.yml.example +``` + +#### Change timeout for unicorn + +``` +# set timeout to 60 +sudo -u git -H editor config/unicorn.rb +``` + +#### Change nginx https settings + +* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/lib/support/nginx/gitlab-ssl but with your setting + +#### MySQL Databases: Update database.yml config file + +* Add `collation: utf8_general_ci` to config/database.yml as seen in [config/database.yml.mysql](config/database.yml.mysql) + + +### 5. Start application + + sudo service gitlab start + sudo service nginx restart + +### 6. Check application status + +Check if GitLab and its environment are configured correctly: + + sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production + +To make sure you didn't miss anything run a more thorough check with: + + sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production + +If all items are green, then congratulations upgrade is complete! + + +### 7. Optional optimizations for GitLab setups with MySQL databases + +Only applies if running MySQL database created with GitLab 6.7 or earlier. If you are not experiencing any issues you may not need the following instructions however following them will bring your database in line with the latest recommended installation configuration and help avoid future issues. Be sure to follow these directions exactly. These directions should be safe for any MySQL instance but to be sure make a current MySQL database backup beforehand. + +``` +# Stop GitLab +sudo service gitlab stop + +# Secure your MySQL installation (added in GitLab 6.2) +sudo mysql_secure_installation + +# Login to MySQL +mysql -u root -p + +# do not type the 'mysql>', this is part of the prompt + +# Convert all tables to use the InnoDB storage engine (added in GitLab 6.8) +SELECT CONCAT('ALTER TABLE gitlabhq_production.', table_name, ' ENGINE=InnoDB;') AS 'Copy & run these SQL statements:' FROM information_schema.tables WHERE table_schema = 'gitlabhq_production' AND `ENGINE` <> 'InnoDB' AND `TABLE_TYPE` = 'BASE TABLE'; + +# If previous query returned results, copy & run all outputed SQL statements + +# Convert all tables to correct character set +SET foreign_key_checks = 0; +SELECT CONCAT('ALTER TABLE gitlabhq_production.', table_name, ' CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci;') AS 'Copy & run these SQL statements:' FROM information_schema.tables WHERE table_schema = 'gitlabhq_production' AND `TABLE_COLLATION` <> 'utf8_unicode_ci' AND `TABLE_TYPE` = 'BASE TABLE'; + +# If previous query returned results, copy & run all outputed SQL statements + +# turn foreign key checks back on +SET foreign_key_checks = 1; + +# Find MySQL users +mysql> SELECT user FROM mysql.user WHERE user LIKE '%git%'; + +# If git user exists and gitlab user does not exist +# you are done with the database cleanup tasks +mysql> \q + +# If both users exist skip to Delete gitlab user + +# Create new user for GitLab (changed in GitLab 6.4) +# change $password in the command below to a real password you pick +mysql> CREATE USER 'git'@'localhost' IDENTIFIED BY '$password'; + +# Grant the git user necessary permissions on the database +mysql> GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, INDEX, ALTER, LOCK TABLES ON `gitlabhq_production`.* TO 'git'@'localhost'; + +# Delete the old gitlab user +mysql> DELETE FROM mysql.user WHERE user='gitlab'; + +# Quit the database session +mysql> \q + +# Try connecting to the new database with the new user +sudo -u git -H mysql -u git -p -D gitlabhq_production + +# Type the password you replaced $password with earlier + +# You should now see a 'mysql>' prompt + +# Quit the database session +mysql> \q + +# Update database configuration details +# See config/database.yml.mysql for latest recommended configuration details +# Remove the reaping_frequency setting line if it exists (removed in GitLab 6.8) +# Set production -> pool: 10 (updated in GitLab 5.3) +# Set production -> username: git +# Set production -> password: the password your replaced $password with earlier +sudo -u git -H editor /home/git/gitlab/config/database.yml + +# Run thorough check +sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production +``` + + +## Things went south? Revert to previous version (7.4) + +### 1. Revert the code to the previous version +Follow the [upgrade guide from 7.3 to 7.4](7.3-to-7.4.md), except for the database migration +(The backup is already migrated to the previous version) + +### 2. Restore from the backup: + +```bash +cd /home/git/gitlab +sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production +``` +If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above. |