--- stage: Systems group: Geo info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments --- # Back up GitLab **(FREE SELF)** The exact procedure for backing up GitLab depends on many factors. Your particular deployment's usage and configuration determine what kind of data exists, where it is located, and how much there is. These factors influence your options for how to perform a back up, how to store it, and how to restore it. ## Simple back up procedure As a rough guideline, if you are using a [1k reference architecture](../reference_architectures/1k_users.md) with less than 100 GB of data, then follow these steps: 1. Run the [backup command](#backup-command). 1. Back up [object storage](#object-storage), if applicable. 1. Manually back up [configuration files](#storing-configuration-files). ## Scaling backups As the volume of GitLab data grows, the [backup command](#backup-command) takes longer to execute. [Backup options](#backup-options) such as [back up Git repositories concurrently](#back-up-git-repositories-concurrently) and [incremental repository backups](#incremental-repository-backups) can help to reduce execution time. At some point, the backup command becomes impractical by itself. For example, it can take 24 hours or more. In some cases, architecture changes may be warranted to allow backups to scale. If you are using a GitLab reference architecture, see [Back up and restore large reference architectures](backup_large_reference_architectures.md). For more information, see [alternative backup strategies](#alternative-backup-strategies). ## What data needs to be backed up? - [PostgreSQL databases](#postgresql-databases) - [Git repositories](#git-repositories) - [Blobs](#blobs) - [Container registry](#container-registry) - [Configuration files](#storing-configuration-files) - [Other data](#other-data) ### PostgreSQL databases In the simplest case, GitLab has one PostgreSQL database in one PostgreSQL server on the same VM as all other GitLab services. But depending on configuration, GitLab may use multiple PostgreSQL databases in multiple PostgreSQL servers. In general, this data is the single source of truth for most user-generated content in the Web interface, such as issue and merge request content, comments, permissions, and credentials. PostgreSQL also holds some cached data like HTML-rendered Markdown, and by default, merge request diffs. However, merge request diffs can also be configured to be offloaded to the file system or object storage, see [Blobs](#blobs). Gitaly Cluster's Praefect service uses a PostgreSQL database as a single source of truth to manage its Gitaly nodes. A common PostgreSQL utility, [`pg_dump`](https://www.postgresql.org/docs/current/app-pgdump.html), produces a backup file which can be used to restore a PostgreSQL database. The [backup command](#backup-command) uses this utility under the hood. Unfortunately, the larger the database, the longer it takes `pg_dump` to execute. Depending on your situation, the duration becomes impractical at some point (days, for example). If your database is over 100 GB, `pg_dump`, and by extension the [backup command](#backup-command), is likely not usable. For more information, see [alternative backup strategies](#alternative-backup-strategies). ### Git repositories A GitLab instance can have one or more repository shards. Each shard is a Gitaly instance or Gitaly Cluster that is responsible for allowing access and operations on the locally stored Git repositories. Gitaly can run on a machine: - With a single disk. - With multiple disks mounted as a single mount-point (like with a RAID array). - Using LVM. Each project can have up to 3 different repositories: - A project repository, where the source code is stored. - A wiki repository, where the wiki content is stored. - A design repository, where design artifacts are indexed (assets are actually in LFS). They all live in the same shard and share the same base name with a `-wiki` and `-design` suffix for Wiki and Design Repository cases. Personal and project snippets, and group wiki content, are stored in Git repositories. Project forks are deduplicated in live a GitLab site using pool repositories. The [backup command](#backup-command) produces a Git bundle for each repository and tars them all up. This duplicates pool repository data into every fork. In [our testing](https://gitlab.com/gitlab-org/gitlab/-/issues/396343), 100 GB of Git repositories took a little over 2 hours to back up and upload to S3. At around 400 GB of Git data, the backup command is likely not viable for regular backups. For more information, see [alternative backup strategies](#alternative-backup-strategies). ### Blobs GitLab stores blobs (or files) such as issue attachments or LFS objects into either: - The file system in a specific location. - An [Object Storage](../object_storage.md) solution. Object Storage solutions can be: - Cloud based like Amazon S3 and Google Cloud Storage. - Hosted by you (like MinIO). - A Storage Appliance that exposes an Object Storage-compatible API. #### Object storage The [backup command](#backup-command) doesn't back up blobs that aren't stored on the file system. If you're using [object storage](../object_storage.md), be sure to enable backups with your object storage provider. For example, see: - [Amazon S3 backups](https://docs.aws.amazon.com/aws-backup/latest/devguide/s3-backups.html) - [Google Cloud Storage Transfer Service](https://cloud.google.com/storage-transfer-service) and [Google Cloud Storage Object Versioning](https://cloud.google.com/storage/docs/object-versioning) ### Container registry [GitLab container registry](../packages/container_registry.md) storage can be configured in either: - The file system in a specific location. - An [Object Storage](../object_storage.md) solution. Object Storage solutions can be: - Cloud based like Amazon S3 and Google Cloud Storage. - Hosted by you (like MinIO). - A Storage Appliance that exposes an Object Storage-compatible API. The backup command backs up registry data when they are stored in the default location on the file system. #### Object storage The [backup command](#backup-command) doesn't back up blobs that aren't stored on the file system. If you're using [object storage](../object_storage.md), be sure to enable backups with your object storage provider. For example, see: - [Amazon S3 backups](https://docs.aws.amazon.com/aws-backup/latest/devguide/s3-backups.html) - [Google Cloud Storage Transfer Service](https://cloud.google.com/storage-transfer-service) and [Google Cloud Storage Object Versioning](https://cloud.google.com/storage/docs/object-versioning) ### Storing configuration files WARNING: The [backup Rake task](#back-up-gitlab) GitLab provides does _not_ store your configuration files. The primary reason for this is that your database contains items including encrypted information for two-factor authentication and the CI/CD _secure variables_. Storing encrypted information in the same location as its key defeats the purpose of using encryption in the first place. For example, the secrets file contains your database encryption key. If you lose it, then the GitLab application will not be able to decrypt any encrypted values in the database. WARNING: The secrets file may change after upgrades. You should back up the configuration directory. At the very **minimum**, you must back up: ::Tabs :::TabTitle Linux package - `/etc/gitlab/gitlab-secrets.json` - `/etc/gitlab/gitlab.rb` For more information, see [Backup and restore Linux package (Omnibus) configuration](https://docs.gitlab.com/omnibus/settings/backups.html#backup-and-restore-omnibus-gitlab-configuration). :::TabTitle Self-compiled - `/home/git/gitlab/config/secrets.yml` - `/home/git/gitlab/config/gitlab.yml` :::TabTitle Docker - Back up the volume where the configuration files are stored. If you created the GitLab container according to the documentation, it should be in the `/srv/gitlab/config` directory. :::TabTitle GitLab Helm chart - Follow the [Back up the secrets](https://docs.gitlab.com/charts/backup-restore/backup.html#back-up-the-secrets) instructions. ::EndTabs You may also want to back up any TLS keys and certificates (`/etc/gitlab/ssl`, `/etc/gitlab/trusted-certs`), and your [SSH host keys](https://superuser.com/questions/532040/copy-ssh-keys-from-one-server-to-another-server/532079#532079) to avoid man-in-the-middle attack warnings if you have to perform a full machine restore. In the unlikely event that the secrets file is lost, see the [troubleshooting section](#when-the-secrets-file-is-lost). ### Other data GitLab uses Redis both as a cache store and to hold persistent data for our background jobs system, Sidekiq. The provided [backup command](#backup-command) does _not_ back up Redis data. This means that in order to take a consistent backup with the [backup command](#backup-command), there must be no pending or running background jobs. It is possible to [manually back up Redis](https://redis.io/docs/management/persistence/#backing-up-redis-data). Elasticsearch is an optional database for advanced search. It can improve search in both source-code level, and user generated content in issues, merge requests, and discussions. The [backup command](#backup-command) does _not_ back up Elasticsearch data. Elasticsearch data can be regenerated from PostgreSQL data after a restore. It is possible to [manually back up Elasticsearch](https://www.elastic.co/guide/en/elasticsearch/reference/current/snapshot-restore.html). ## Command-line interface GitLab provides a command-line interface to back up your entire instance, including: - Database - Attachments - Git repositories data - CI/CD job output logs - CI/CD job artifacts - LFS objects - Terraform states ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/331806) in GitLab 14.7) - Container registry images - GitLab Pages content - Packages ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/332006) in GitLab 14.7) - Snippets - [Group wikis](../../user/project/wiki/group.md) - Project-level Secure Files ([introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/121142) in GitLab 16.1) Backups do not include: - [Mattermost data](https://docs.mattermost.com/administration/config-settings.html#file-storage) - Redis (and thus Sidekiq jobs) - [Object storage](#object-storage) WARNING: GitLab does not back up any configuration files (`/etc/gitlab`), TLS keys and certificates, or system files. You are highly advised to read about [storing configuration files](#storing-configuration-files). ### Requirements To be able to back up and restore, ensure that Rsync is installed on your system. If you installed GitLab: - Using the Linux package, Rsync is already installed. - Using self-compiled, check if `rsync` is installed. If Rsync is not installed, install it. For example: ```shell # Debian/Ubuntu sudo apt-get install rsync # RHEL/CentOS sudo yum install rsync ``` ### Backup command WARNING: The backup command does not back up items in [object storage](#object-storage). WARNING: The backup command requires [additional parameters](#back-up-and-restore-for-installations-using-pgbouncer) when your installation is using PgBouncer, for either performance reasons or when using it with a Patroni cluster. WARNING: Before GitLab 15.5.0, the backup command doesn't verify if another backup is already running, as described in [issue 362593](https://gitlab.com/gitlab-org/gitlab/-/issues/362593). We strongly recommend you make sure that all backups are complete before starting a new one. NOTE: You can only restore a backup to **exactly the same version and type (CE/EE)** of GitLab on which it was created. ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create ``` :::TabTitle Helm chart (Kubernetes) Run the backup task by using `kubectl` to run the `backup-utility` script on the GitLab toolbox pod. For more details, see the [charts backup documentation](https://docs.gitlab.com/charts/backup-restore/backup.html). :::TabTitle Docker Run the backup from the host. - GitLab 12.2 or later: ```shell docker exec -t gitlab-backup create ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production ``` ::EndTabs If your GitLab deployment has multiple nodes, you need to pick a node for running the backup command. You must ensure that the designated node: - is persistent, and not subject to auto-scaling. - has the GitLab Rails application already installed. If Puma or Sidekiq is running, then Rails is installed. - has sufficient storage and memory to produce the backup file. Example output: ```plaintext Dumping database tables: - Dumping table events... [DONE] - Dumping table issues... [DONE] - Dumping table keys... [DONE] - Dumping table merge_requests... [DONE] - Dumping table milestones... [DONE] - Dumping table namespaces... [DONE] - Dumping table notes... [DONE] - Dumping table projects... [DONE] - Dumping table protected_branches... [DONE] - Dumping table schema_migrations... [DONE] - Dumping table services... [DONE] - Dumping table snippets... [DONE] - Dumping table taggings... [DONE] - Dumping table tags... [DONE] - Dumping table users... [DONE] - Dumping table users_projects... [DONE] - Dumping table web_hooks... [DONE] - Dumping table wikis... [DONE] Dumping repositories: - Dumping repository abcd... [DONE] Creating backup archive: _gitlab_backup.tar [DONE] Deleting tmp directories...[DONE] Deleting old backups... [SKIPPING] ``` ### Backup options The command-line tool GitLab provides to back up your instance can accept more options. #### Backup strategy option The default backup strategy is to essentially stream data from the respective data locations to the backup using the Linux command `tar` and `gzip`. This works fine in most cases, but can cause problems when data is rapidly changing. When data changes while `tar` is reading it, the error `file changed as we read it` may occur, and causes the backup process to fail. In that case, you can use the backup strategy called `copy`. The strategy copies data files to a temporary location before calling `tar` and `gzip`, avoiding the error. A side-effect is that the backup process takes up to an additional 1X disk space. The process does its best to clean up the temporary files at each stage so the problem doesn't compound, but it could be a considerable change for large installations. To use the `copy` strategy instead of the default streaming strategy, specify `STRATEGY=copy` in the Rake task command. For example: ```shell sudo gitlab-backup create STRATEGY=copy ``` #### Backup file name WARNING: If you use a custom backup file name, you can't [limit the lifetime of the backups](#limit-backup-lifetime-for-local-files-prune-old-backups). Backup files are created with file names according to [specific defaults](index.md#backup-id). However, you can override the `` portion of the file name by setting the `BACKUP` environment variable. For example: ```shell sudo gitlab-backup create BACKUP=dump ``` The resulting file is named `dump_gitlab_backup.tar`. This is useful for systems that make use of rsync and incremental backups, and results in considerably faster transfer speeds. #### Backup compression By default, Gzip fast compression is applied during backup of: - [PostgreSQL database](#postgresql-databases) dumps. - [blobs](#blobs), for example uploads, job artifacts, external merge request diffs. The default command is `gzip -c -1`. You can override this command with `COMPRESS_CMD`. Similarly, you can override the decompression command with `DECOMPRESS_CMD`. Caveats: - The compression command is used in a pipeline, so your custom command must output to `stdout`. - If you specify a command that is not packaged with GitLab, then you must install it yourself. - The resultant file names will still end in `.gz`. - The default decompression command, used during restore, is `gzip -cd`. Therefore if you override the compression command to use a format that cannot be decompressed by `gzip -cd`, you must override the decompression command during restore. ##### Default compression: Gzip with fastest method ```shell gitlab-backup create ``` ##### Gzip with slowest method ```shell gitlab-backup create COMPRESS_CMD="gzip -c --best" ``` If `gzip` was used for backup, then restore does not require any options: ```shell gitlab-backup restore ``` ##### No compression If your backup destination has built-in automatic compression, then you may wish to skip compression. The `tee` command pipes `stdin` to `stdout`. ```shell gitlab-backup create COMPRESS_CMD=tee ``` And on restore: ```shell gitlab-backup restore DECOMPRESS_CMD=tee ``` ##### Parallel compression with `pigz` WARNING: While we support using `COMPRESS_CMD` and `DECOMPRESS_CMD` to override the default Gzip compression library, we currently only test the default Gzip library with default options on a routine basis. You are responsible for testing and validating the viability of your backups. We strongly recommend this as best practice in general for backups, whether overriding the compression command or not. If you encounter issues with another compression library, you should revert back to the default. Troubleshooting and fixing errors with alternative libraries are a lower priority for GitLab. NOTE: `pigz` is not included in the GitLab Linux package. You must install it yourself. An example of compressing backups with `pigz` using 4 processes: ```shell sudo gitlab-backup create COMPRESS_CMD="pigz --compress --stdout --fast --processes=4" ``` Because `pigz` compresses to the `gzip` format, it is not required to use `pigz` to decompress backups which were compressed by `pigz`. However, it can still have a performance benefit over `gzip`. An example of decompressing backups with `pigz`: ```shell sudo gitlab-backup restore DECOMPRESS_CMD="pigz --decompress --stdout" ``` ##### Parallel compression with `zstd` WARNING: While we support using `COMPRESS_CMD` and `DECOMPRESS_CMD` to override the default Gzip compression library, we currently only test the default Gzip library with default options on a routine basis. You are responsible for testing and validating the viability of your backups. We strongly recommend this as best practice in general for backups, whether overriding the compression command or not. If you encounter issues with another compression library, you should revert back to the default. Troubleshooting and fixing errors with alternative libraries are a lower priority for GitLab. NOTE: `zstd` is not included in the GitLab Linux package. You must install it yourself. An example of compressing backups with `zstd` using 4 threads: ```shell sudo gitlab-backup create COMPRESS_CMD="zstd --compress --stdout --fast --threads=4" ``` An example of decompressing backups with `zstd`: ```shell sudo gitlab-backup restore DECOMPRESS_CMD="zstd --decompress --stdout" ``` #### Confirm archive can be transferred To ensure the generated archive is transferable by rsync, you can set the `GZIP_RSYNCABLE=yes` option. This sets the `--rsyncable` option to `gzip`, which is useful only in combination with setting [the Backup file name option](#backup-file-name). The `--rsyncable` option in `gzip` isn't guaranteed to be available on all distributions. To verify that it's available in your distribution, run `gzip --help` or consult the man pages. ```shell sudo gitlab-backup create BACKUP=dump GZIP_RSYNCABLE=yes ``` #### Excluding specific directories from the backup You can exclude specific directories from the backup by adding the environment variable `SKIP`, whose values are a comma-separated list of the following options: - `db` (database) - `uploads` (attachments) - `builds` (CI job output logs) - `artifacts` (CI job artifacts) - `lfs` (LFS objects) - `terraform_state` (Terraform states) - `registry` (Container registry images) - `pages` (Pages content) - `repositories` (Git repositories data) - `packages` (Packages) - `ci_secure_files` (Project-level Secure Files) NOTE: When [backing up and restoring Helm Charts](https://docs.gitlab.com/charts/architecture/backup-restore.html), there is an additional option `packages`, which refers to any packages managed by the GitLab [package registry](../../user/packages/package_registry/index.md). For more information see [command line arguments](https://docs.gitlab.com/charts/architecture/backup-restore.html#command-line-arguments). All wikis are backed up as part of the `repositories` group. Non-existent wikis are skipped during a backup. ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create SKIP=db,uploads ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create SKIP=db,uploads RAILS_ENV=production ``` ::EndTabs `SKIP=` is also used to: - [Skip creation of the tar file](#skipping-tar-creation) (`SKIP=tar`). - [Skip uploading the backup to remote storage](#skip-uploading-backups-to-remote-storage) (`SKIP=remote`). #### Skipping tar creation NOTE: It is not possible to skip the tar creation when using [object storage](#upload-backups-to-a-remote-cloud-storage) for backups. The last part of creating a backup is generation of a `.tar` file containing all the parts. In some cases, creating a `.tar` file might be wasted effort or even directly harmful, so you can skip this step by adding `tar` to the `SKIP` environment variable. Example use-cases: - When the backup is picked up by other backup software. - To speed up incremental backups by avoiding having to extract the backup every time. (In this case, `PREVIOUS_BACKUP` and `BACKUP` must not be specified, otherwise the specified backup is extracted, but no `.tar` file is generated at the end.) Adding `tar` to the `SKIP` variable leaves the files and directories containing the backup in the directory used for the intermediate files. These files are overwritten when a new backup is created, so you should make sure they are copied elsewhere, because you can only have one backup on the system. ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create SKIP=tar ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create SKIP=tar RAILS_ENV=production ``` ::EndTabs #### Create server-side repository backups > - [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/4941) in GitLab 16.3. > - Server-side support for restoring a specified backup instead of the latest backup [introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/132188) in GitLab 16.6. > - Server-side support for creating incremental backups [introduced](https://gitlab.com/gitlab-org/gitaly/-/merge_requests/6475) in GitLab 16.6. Instead of storing large repository backups in the backup archive, repository backups can be configured so that the Gitaly node that hosts each repository is responsible for creating the backup and streaming it to object storage. This helps reduce the network resources required to create and restore a backup. 1. [Configure a server-side backup destination in Gitaly](../gitaly/configure_gitaly.md#configure-server-side-backups). 1. Create a back up using the `REPOSITORIES_SERVER_SIDE` variable. See the following examples. ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create REPOSITORIES_SERVER_SIDE=true ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create REPOSITORIES_SERVER_SIDE=true ``` ::EndTabs #### Back up Git repositories concurrently > - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/37158) in GitLab 13.3. > - [Concurrent restore introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/69330) in GitLab 14.3 When using [multiple repository storages](../repository_storage_paths.md), repositories can be backed up or restored concurrently to help fully use CPU time. The following variables are available to modify the default behavior of the Rake task: - `GITLAB_BACKUP_MAX_CONCURRENCY`: The maximum number of projects to back up at the same time. Defaults to the number of logical CPUs (in GitLab 14.1 and earlier, defaults to `1`). - `GITLAB_BACKUP_MAX_STORAGE_CONCURRENCY`: The maximum number of projects to back up at the same time on each storage. This allows the repository backups to be spread across storages. Defaults to `2` (in GitLab 14.1 and earlier, defaults to `1`). For example, with 4 repository storages: ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create GITLAB_BACKUP_MAX_CONCURRENCY=4 GITLAB_BACKUP_MAX_STORAGE_CONCURRENCY=1 ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create GITLAB_BACKUP_MAX_CONCURRENCY=4 GITLAB_BACKUP_MAX_STORAGE_CONCURRENCY=1 ``` ::EndTabs #### Incremental repository backups > - Introduced in GitLab 14.9 [with a flag](../feature_flags.md) named `incremental_repository_backup`. Disabled by default. > - [Enabled on self-managed](https://gitlab.com/gitlab-org/gitlab/-/issues/355945) in GitLab 14.10. > - `PREVIOUS_BACKUP` option [introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/4184) in GitLab 15.0. > - Server-side support for creating incremental backups [introduced](https://gitlab.com/gitlab-org/gitaly/-/merge_requests/6475) in GitLab 16.6. FLAG: On self-managed GitLab, by default this feature is available. To hide the feature, an administrator can [disable the feature flag](../feature_flags.md) named `incremental_repository_backup`. On GitLab.com, this feature is not available. NOTE: Only repositories support incremental backups. Therefore, if you use `INCREMENTAL=yes`, the task creates a self-contained backup tar archive. This is because all subtasks except repositories are still creating full backups (they overwrite the existing full backup). See [issue 19256](https://gitlab.com/gitlab-org/gitlab/-/issues/19256) for a feature request to support incremental backups for all subtasks. Incremental repository backups can be faster than full repository backups because they only pack changes since the last backup into the backup bundle for each repository. The incremental backup archives are not linked to each other: each archive is a self-contained backup of the instance. There must be an existing backup to create an incremental backup from: - In GitLab 14.9 and 14.10, use the `BACKUP=` option to choose the backup to use. The chosen previous backup is overwritten. - In GitLab 15.0 and later, use the `PREVIOUS_BACKUP=` option to choose the backup to use. By default, a backup file is created as documented in the [Backup ID](index.md#backup-id) section. You can override the `` portion of the file name by setting the [`BACKUP` environment variable](#backup-file-name). To create an incremental backup, run: - In GitLab 15.0 or later: ```shell sudo gitlab-backup create INCREMENTAL=yes PREVIOUS_BACKUP= ``` - In GitLab 14.9 and 14.10: ```shell sudo gitlab-backup create INCREMENTAL=yes BACKUP= ``` To create an [untarred](#skipping-tar-creation) incremental backup from a tarred backup, use `SKIP=tar`: ```shell sudo gitlab-backup create INCREMENTAL=yes SKIP=tar ``` #### Back up specific repository storages > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/86896) in GitLab 15.0. When using [multiple repository storages](../repository_storage_paths.md), repositories from specific repository storages can be backed up separately using the `REPOSITORIES_STORAGES` option. The option accepts a comma-separated list of storage names. For example: ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create REPOSITORIES_STORAGES=storage1,storage2 ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create REPOSITORIES_STORAGES=storage1,storage2 ``` ::EndTabs #### Back up specific repositories > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/88094) in GitLab 15.1. You can back up specific repositories using the `REPOSITORIES_PATHS` option. Similarly, you can use `SKIP_REPOSITORIES_PATHS` to skip certain repositories. Both options accept a comma-separated list of project or group paths. If you specify a group path, all repositories in all projects in the group and descendent groups are included or skipped, depending on which option you used. For example, to back up all repositories for all projects in **Group A** (`group-a`), the repository for **Project C** in **Group B** (`group-b/project-c`), and skip the **Project D** in **Group A** (`group-a/project-d`): ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create REPOSITORIES_PATHS=group-a,group-b/project-c SKIP_REPOSITORIES_PATHS=group-a/project-d ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create REPOSITORIES_PATHS=group-a,group-b/project-c SKIP_REPOSITORIES_PATHS=group-a/project-d ``` ::EndTabs #### Upload backups to a remote (cloud) storage NOTE: It is not possible to [skip the tar creation](#skipping-tar-creation) when using object storage for backups. You can let the backup script upload (using the [Fog library](https://fog.io/)) the `.tar` file it creates. In the following example, we use Amazon S3 for storage, but Fog also lets you use [other storage providers](https://fog.io/storage/). GitLab also [imports cloud drivers](https://gitlab.com/gitlab-org/gitlab/-/blob/da46c9655962df7d49caef0e2b9f6bbe88462a02/Gemfile#L113) for AWS, Google, and Aliyun. A local driver is [also available](#upload-to-locally-mounted-shares). [Read more about using object storage with GitLab](../object_storage.md). ##### Using Amazon S3 For Linux package (Omnibus): 1. Add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['backup_upload_connection'] = { 'provider' => 'AWS', 'region' => 'eu-west-1', 'aws_access_key_id' => 'AKIAKIAKI', 'aws_secret_access_key' => 'secret123' # If using an IAM Profile, don't configure aws_access_key_id & aws_secret_access_key # 'use_iam_profile' => true } gitlab_rails['backup_upload_remote_directory'] = 'my.s3.bucket' # Consider using multipart uploads when file size reaches 100MB. Enter a number in bytes. # gitlab_rails['backup_multipart_chunk_size'] = 104857600 ``` 1. [Reconfigure GitLab](../restart_gitlab.md#reconfigure-a-linux-package-installation) for the changes to take effect ##### S3 Encrypted Buckets > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/64765) in GitLab 14.3. AWS supports these [modes for server side encryption](https://docs.aws.amazon.com/AmazonS3/latest/userguide/serv-side-encryption.html): - Amazon S3-Managed Keys (SSE-S3) - Customer Master Keys (CMKs) Stored in AWS Key Management Service (SSE-KMS) - Customer-Provided Keys (SSE-C) Use your mode of choice with GitLab. Each mode has similar, but slightly different, configuration methods. ###### SSE-S3 To enable SSE-S3, in the backup storage options set the `server_side_encryption` field to `AES256`. For example, in the Linux package (Omnibus): ```ruby gitlab_rails['backup_upload_storage_options'] = { 'server_side_encryption' => 'AES256' } ``` ###### SSE-KMS To enable SSE-KMS, you need the [KMS key via its Amazon Resource Name (ARN) in the `arn:aws:kms:region:acct-id:key/key-id` format](https://docs.aws.amazon.com/AmazonS3/latest/userguide/UsingKMSEncryption.html). Under the `backup_upload_storage_options` configuration setting, set: - `server_side_encryption` to `aws:kms`. - `server_side_encryption_kms_key_id` to the ARN of the key. For example, in the Linux package (Omnibus): ```ruby gitlab_rails['backup_upload_storage_options'] = { 'server_side_encryption' => 'aws:kms', 'server_side_encryption_kms_key_id' => 'arn:aws::' } ``` ###### SSE-C SSE-C requires you to set these encryption options: - `backup_encryption`: AES256. - `backup_encryption_key`: Unencoded, 32-byte (256 bits) key. The upload fails if this isn't exactly 32 bytes. For example, in the Linux package (Omnibus): ```ruby gitlab_rails['backup_encryption'] = 'AES256' gitlab_rails['backup_encryption_key'] = '' ``` If the key contains binary characters and cannot be encoded in UTF-8, instead, specify the key with the `GITLAB_BACKUP_ENCRYPTION_KEY` environment variable. For example: ```ruby gitlab_rails['env'] = { 'GITLAB_BACKUP_ENCRYPTION_KEY' => "\xDE\xAD\xBE\xEF" * 8 } ``` ##### Digital Ocean Spaces This example can be used for a bucket in Amsterdam (AMS3): 1. Add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['backup_upload_connection'] = { 'provider' => 'AWS', 'region' => 'ams3', 'aws_access_key_id' => 'AKIAKIAKI', 'aws_secret_access_key' => 'secret123', 'endpoint' => 'https://ams3.digitaloceanspaces.com' } gitlab_rails['backup_upload_remote_directory'] = 'my.s3.bucket' ``` 1. [Reconfigure GitLab](../restart_gitlab.md#reconfigure-a-linux-package-installation) for the changes to take effect If you see a `400 Bad Request` error message when using Digital Ocean Spaces, the cause may be the use of backup encryption. Because Digital Ocean Spaces doesn't support encryption, remove or comment the line that contains `gitlab_rails['backup_encryption']`. ##### Other S3 Providers Not all S3 providers are fully compatible with the Fog library. For example, if you see a `411 Length Required` error message after attempting to upload, you may need to downgrade the `aws_signature_version` value from the default value to `2`, [due to this issue](https://github.com/fog/fog-aws/issues/428). For self-compiled installations: 1. Edit `home/git/gitlab/config/gitlab.yml`: ```yaml backup: # snip upload: # Fog storage connection settings, see https://fog.io/storage/ . connection: provider: AWS region: eu-west-1 aws_access_key_id: AKIAKIAKI aws_secret_access_key: 'secret123' # If using an IAM Profile, leave aws_access_key_id & aws_secret_access_key empty # ie. aws_access_key_id: '' # use_iam_profile: 'true' # The remote 'directory' to store your backups. For S3, this would be the bucket name. remote_directory: 'my.s3.bucket' # Specifies Amazon S3 storage class to use for backups, this is optional # storage_class: 'STANDARD' # # Turns on AWS Server-Side Encryption with Amazon Customer-Provided Encryption Keys for backups, this is optional # 'encryption' must be set in order for this to have any effect. # 'encryption_key' should be set to the 256-bit encryption key for Amazon S3 to use to encrypt or decrypt. # To avoid storing the key on disk, the key can also be specified via the `GITLAB_BACKUP_ENCRYPTION_KEY` your data. # encryption: 'AES256' # encryption_key: '' # # # Turns on AWS Server-Side Encryption with Amazon S3-Managed keys (optional) # https://docs.aws.amazon.com/AmazonS3/latest/userguide/serv-side-encryption.html # For SSE-S3, set 'server_side_encryption' to 'AES256'. # For SS3-KMS, set 'server_side_encryption' to 'aws:kms'. Set # 'server_side_encryption_kms_key_id' to the ARN of customer master key. # storage_options: # server_side_encryption: 'aws:kms' # server_side_encryption_kms_key_id: 'arn:aws:kms:YOUR-KEY-ID-HERE' ``` 1. [Restart GitLab](../restart_gitlab.md#self-compiled-installations) for the changes to take effect If you're uploading your backups to S3, you should create a new IAM user with restricted access rights. To give the upload user access only for uploading backups create the following IAM profile, replacing `my.s3.bucket` with the name of your bucket: ```json { "Version": "2012-10-17", "Statement": [ { "Sid": "Stmt1412062044000", "Effect": "Allow", "Action": [ "s3:AbortMultipartUpload", "s3:GetBucketAcl", "s3:GetBucketLocation", "s3:GetObject", "s3:GetObjectAcl", "s3:ListBucketMultipartUploads", "s3:PutObject", "s3:PutObjectAcl" ], "Resource": [ "arn:aws:s3:::my.s3.bucket/*" ] }, { "Sid": "Stmt1412062097000", "Effect": "Allow", "Action": [ "s3:GetBucketLocation", "s3:ListAllMyBuckets" ], "Resource": [ "*" ] }, { "Sid": "Stmt1412062128000", "Effect": "Allow", "Action": [ "s3:ListBucket" ], "Resource": [ "arn:aws:s3:::my.s3.bucket" ] } ] } ``` ##### Using Google Cloud Storage To use Google Cloud Storage to save backups, you must first create an access key from the Google console: 1. Go to the [Google storage settings page](https://console.cloud.google.com/storage/settings). 1. Select **Interoperability**, and then create an access key. 1. Make note of the **Access Key** and **Secret** and replace them in the following configurations. 1. In the buckets advanced settings ensure the Access Control option **Set object-level and bucket-level permissions** is selected. 1. Ensure you have already created a bucket. For the Linux package (Omnibus): 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['backup_upload_connection'] = { 'provider' => 'Google', 'google_storage_access_key_id' => 'Access Key', 'google_storage_secret_access_key' => 'Secret', ## If you have CNAME buckets (foo.example.com), you might run into SSL issues ## when uploading backups ("hostname foo.example.com.storage.googleapis.com ## does not match the server certificate"). In that case, uncomment the following ## setting. See: https://github.com/fog/fog/issues/2834 #'path_style' => true } gitlab_rails['backup_upload_remote_directory'] = 'my.google.bucket' ``` 1. [Reconfigure GitLab](../restart_gitlab.md#reconfigure-a-linux-package-installation) for the changes to take effect For self-compiled installations: 1. Edit `home/git/gitlab/config/gitlab.yml`: ```yaml backup: upload: connection: provider: 'Google' google_storage_access_key_id: 'Access Key' google_storage_secret_access_key: 'Secret' remote_directory: 'my.google.bucket' ``` 1. [Restart GitLab](../restart_gitlab.md#self-compiled-installations) for the changes to take effect ##### Using Azure Blob storage > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/25877) in GitLab 13.4. ::Tabs :::TabTitle Linux package (Omnibus) 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['backup_upload_connection'] = { 'provider' => 'AzureRM', 'azure_storage_account_name' => '', 'azure_storage_access_key' => '', 'azure_storage_domain' => 'blob.core.windows.net', # Optional } gitlab_rails['backup_upload_remote_directory'] = '' ``` 1. [Reconfigure GitLab](../restart_gitlab.md#reconfigure-a-linux-package-installation) for the changes to take effect :::TabTitle Self-compiled 1. Edit `home/git/gitlab/config/gitlab.yml`: ```yaml backup: upload: connection: provider: 'AzureRM' azure_storage_account_name: '' azure_storage_access_key: '' remote_directory: '' ``` 1. [Restart GitLab](../restart_gitlab.md#self-compiled-installations) for the changes to take effect ::EndTabs For more details, see the [table of Azure parameters](../object_storage.md#azure-blob-storage). ##### Specifying a custom directory for backups This option works only for remote storage. If you want to group your backups, you can pass a `DIRECTORY` environment variable: ```shell sudo gitlab-backup create DIRECTORY=daily sudo gitlab-backup create DIRECTORY=weekly ``` #### Skip uploading backups to remote storage If you have configured GitLab to [upload backups in a remote storage](#upload-backups-to-a-remote-cloud-storage), you can use the `SKIP=remote` option to skip uploading your backups to the remote storage. ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create SKIP=remote ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create SKIP=remote RAILS_ENV=production ``` ::EndTabs #### Upload to locally-mounted shares You can send backups to a locally-mounted share (for example, `NFS`,`CIFS`, or `SMB`) using the Fog [`Local`](https://github.com/fog/fog-local#usage) storage provider. To do this, you must set the following configuration keys: - `backup_upload_connection.local_root`: mounted directory that backups are copied to. - `backup_upload_remote_directory`: subdirectory of the `backup_upload_connection.local_root` directory. It is created if it doesn't exist. If you want to copy the tarballs to the root of your mounted directory, use `.`. When mounted, the directory set in the `local_root` key must be owned by either: - The `git` user. So, mounting with the `uid=` of the `git` user for `CIFS` and `SMB`. - The user that you are executing the backup tasks as. For the Linux package (Omnibus), this is the `git` user. Because file system performance may affect overall GitLab performance, [we don't recommend using cloud-based file systems for storage](../nfs.md#avoid-using-cloud-based-file-systems). ##### Avoid conflicting configuration Don't set the following configuration keys to the same path: - `gitlab_rails['backup_path']` (`backup.path` for self-compiled installations). - `gitlab_rails['backup_upload_connection'].local_root` (`backup.upload.connection.local_root` for self-compiled installations). The `backup_path` configuration key sets the local location of the backup file. The `upload` configuration key is intended for use when the backup file is uploaded to a separate server, perhaps for archival purposes. If these configuration keys are set to the same location, the upload feature fails because a backup already exists at the upload location. This failure causes the upload feature to delete the backup because it assumes it's a residual file remaining after the failed upload attempt. ##### Configure uploads to locally-mounted shares ::Tabs :::TabTitle Linux package (Omnibus) 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['backup_upload_connection'] = { :provider => 'Local', :local_root => '/mnt/backups' } # The directory inside the mounted folder to copy backups to # Use '.' to store them in the root directory gitlab_rails['backup_upload_remote_directory'] = 'gitlab_backups' ``` 1. [Reconfigure GitLab](../restart_gitlab.md#reconfigure-a-linux-package-installation) for the changes to take effect. :::TabTitle Self-compiled 1. Edit `home/git/gitlab/config/gitlab.yml`: ```yaml backup: upload: # Fog storage connection settings, see https://fog.io/storage/ . connection: provider: Local local_root: '/mnt/backups' # The directory inside the mounted folder to copy backups to # Use '.' to store them in the root directory remote_directory: 'gitlab_backups' ``` 1. [Restart GitLab](../restart_gitlab.md#self-compiled-installations) for the changes to take effect. ::EndTabs #### Backup archive permissions The backup archives created by GitLab (`1393513186_2014_02_27_gitlab_backup.tar`) have the owner/group `git`/`git` and 0600 permissions by default. This is meant to avoid other system users reading GitLab data. If you need the backup archives to have different permissions, you can use the `archive_permissions` setting. ::Tabs :::TabTitle Linux package (Omnibus) 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['backup_archive_permissions'] = 0644 # Makes the backup archives world-readable ``` 1. [Reconfigure GitLab](../restart_gitlab.md#reconfigure-a-linux-package-installation) for the changes to take effect. :::TabTitle Self-compiled 1. Edit `/home/git/gitlab/config/gitlab.yml`: ```yaml backup: archive_permissions: 0644 # Makes the backup archives world-readable ``` 1. [Restart GitLab](../restart_gitlab.md#self-compiled-installations) for the changes to take effect. ::EndTabs #### Configuring cron to make daily backups WARNING: The following cron jobs do not [back up your GitLab configuration files](#storing-configuration-files) or [SSH host keys](https://superuser.com/questions/532040/copy-ssh-keys-from-one-server-to-another-server/532079#532079). You can schedule a cron job that backs up your repositories and GitLab metadata. ::Tabs :::TabTitle Linux package (Omnibus) 1. Edit the crontab for the `root` user: ```shell sudo su - crontab -e ``` 1. There, add the following line to schedule the backup for everyday at 2 AM: ```plaintext 0 2 * * * /opt/gitlab/bin/gitlab-backup create CRON=1 ``` :::TabTitle Self-compiled 1. Edit the crontab for the `git` user: ```shell sudo -u git crontab -e ``` 1. Add the following lines at the bottom: ```plaintext # Create a full backup of the GitLab repositories and SQL database every day at 2am 0 2 * * * cd /home/git/gitlab && PATH=/usr/local/bin:/usr/bin:/bin bundle exec rake gitlab:backup:create RAILS_ENV=production CRON=1 ``` ::EndTabs The `CRON=1` environment setting directs the backup script to hide all progress output if there aren't any errors. This is recommended to reduce cron spam. When troubleshooting backup problems, however, replace `CRON=1` with `--trace` to log verbosely. #### Limit backup lifetime for local files (prune old backups) WARNING: The process described in this section doesn't work if you used a [custom file name](#backup-file-name) for your backups. To prevent regular backups from using all your disk space, you may want to set a limited lifetime for backups. The next time the backup task runs, backups older than the `backup_keep_time` are pruned. This configuration option manages only local files. GitLab doesn't prune old files stored in a third-party [object storage](#upload-backups-to-a-remote-cloud-storage) because the user may not have permission to list and delete files. It's recommended that you configure the appropriate retention policy for your object storage (for example, [AWS S3](https://docs.aws.amazon.com/AmazonS3/latest/user-guide/create-lifecycle.html)). ::Tabs :::TabTitle Linux package (Omnibus) 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby ## Limit backup lifetime to 7 days - 604800 seconds gitlab_rails['backup_keep_time'] = 604800 ``` 1. [Reconfigure GitLab](../restart_gitlab.md#reconfigure-a-linux-package-installation) for the changes to take effect. :::TabTitle Self-compiled 1. Edit `/home/git/gitlab/config/gitlab.yml`: ```yaml backup: ## Limit backup lifetime to 7 days - 604800 seconds keep_time: 604800 ``` 1. [Restart GitLab](../restart_gitlab.md#self-compiled-installations) for the changes to take effect. ::EndTabs #### Back up and restore for installations using PgBouncer Do not back up or restore GitLab through a PgBouncer connection. These tasks must [bypass PgBouncer and connect directly to the PostgreSQL primary database node](#bypassing-pgbouncer), or they cause a GitLab outage. When the GitLab backup or restore task is used with PgBouncer, the following error message is shown: ```ruby ActiveRecord::StatementInvalid: PG::UndefinedTable ``` Each time the GitLab backup runs, GitLab starts generating 500 errors and errors about missing tables will [be logged by PostgreSQL](../logs/index.md#postgresql-logs): ```plaintext ERROR: relation "tablename" does not exist at character 123 ``` This happens because the task uses `pg_dump`, which [sets a null search path and explicitly includes the schema in every SQL query](https://gitlab.com/gitlab-org/gitlab/-/issues/23211) to address [CVE-2018-1058](https://www.postgresql.org/about/news/postgresql-103-968-9512-9417-and-9322-released-1834/). Because connections are reused with PgBouncer in transaction pooling mode, PostgreSQL fails to search the default `public` schema. As a result, this clearing of the search path causes tables and columns to appear missing. ##### Bypassing PgBouncer There are two ways to fix this: 1. [Use environment variables to override the database settings](#environment-variable-overrides) for the backup task. 1. Reconfigure a node to [connect directly to the PostgreSQL primary database node](../postgresql/pgbouncer.md#procedure-for-bypassing-pgbouncer). ###### Environment variable overrides > Multiple databases support was [introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/133177) in GitLab 16.5. By default, GitLab uses the database configuration stored in a configuration file (`database.yml`). However, you can override the database settings for the backup and restore task by setting environment variables that are prefixed with `GITLAB_BACKUP_`: - `GITLAB_BACKUP_PGHOST` - `GITLAB_BACKUP_PGUSER` - `GITLAB_BACKUP_PGPORT` - `GITLAB_BACKUP_PGPASSWORD` - `GITLAB_BACKUP_PGSSLMODE` - `GITLAB_BACKUP_PGSSLKEY` - `GITLAB_BACKUP_PGSSLCERT` - `GITLAB_BACKUP_PGSSLROOTCERT` - `GITLAB_BACKUP_PGSSLCRL` - `GITLAB_BACKUP_PGSSLCOMPRESSION` For example, to override the database host and port to use 192.168.1.10 and port 5432 with the Linux package (Omnibus): ```shell sudo GITLAB_BACKUP_PGHOST=192.168.1.10 GITLAB_BACKUP_PGPORT=5432 /opt/gitlab/bin/gitlab-backup create ``` If you run GitLab on [multiple databases](../postgresql/multiple_databases.md), you can override database settings by including the database name in the environment variable. For example if your `main` and `ci` databases are hosted on different database servers, you would append their name after the `GITLAB_BACKUP_` prefix, leaving the `PG*` names as is: ```shell sudo GITLAB_BACKUP_MAIN_PGHOST=192.168.1.10 GITLAB_BACKUP_CI_PGHOST=192.168.1.12 /opt/gitlab/bin/gitlab-backup create ``` See the [PostgreSQL documentation](https://www.postgresql.org/docs/12/libpq-envars.html) for more details on what these parameters do. #### `gitaly-backup` for repository backup and restore > - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/333034) in GitLab 14.2. > - [Deployed behind a feature flag](../../user/feature_flags.md), enabled by default. > - [Generally available](https://gitlab.com/gitlab-org/gitlab/-/issues/333034) in GitLab 14.10. [Feature flag `gitaly_backup`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/83254) removed. The `gitaly-backup` binary is used by the backup Rake task to create and restore repository backups from Gitaly. `gitaly-backup` replaces the previous backup method that directly calls RPCs on Gitaly from GitLab. The backup Rake task must be able to find this executable. In most cases, you don't need to change the path to the binary as it should work fine with the default path `/opt/gitlab/embedded/bin/gitaly-backup`. If you have a specific reason to change the path, it can be configured in the Linux package (Omnibus): 1. Add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['backup_gitaly_backup_path'] = '/path/to/gitaly-backup' ``` 1. [Reconfigure GitLab](../restart_gitlab.md#reconfigure-a-linux-package-installation) for the changes to take effect. ## Alternative backup strategies Because every deployment may have different capabilities, you should first review [what data needs to be backed up](#what-data-needs-to-be-backed-up) to better understand if, and how, you can leverage them. For example, if you use Amazon RDS, you might choose to use its built-in backup and restore features to handle your GitLab [PostgreSQL data](#postgresql-databases), and [exclude PostgreSQL data](#excluding-specific-directories-from-the-backup) when using the [backup command](#backup-command). In the following cases, consider using file system data transfer or snapshots as part of your backup strategy: - Your GitLab instance contains a lot of Git repository data and the GitLab backup script is too slow. - Your GitLab instance has a lot of forked projects and the regular backup task duplicates the Git data for all of them. - Your GitLab instance has a problem and using the regular backup and import Rake tasks isn't possible. WARNING: Gitaly Cluster [does not support snapshot backups](../gitaly/index.md#snapshot-backup-and-recovery-limitations). When considering using file system data transfer or snapshots: - Don't use these methods to migrate from one operating system to another. The operating systems of the source and destination should be as similar as possible. For example, don't use these methods to migrate from Ubuntu to RHEL. - Data consistency is very important. You should stop GitLab with `sudo gitlab-ctl stop` before taking doing a file system transfer (with `rsync`, for example) or taking a snapshot. Example: Amazon Elastic Block Store (EBS) - A GitLab server using the Linux package (Omnibus) hosted on Amazon AWS. - An EBS drive containing an ext4 file system is mounted at `/var/opt/gitlab`. - In this case you could make an application backup by taking an EBS snapshot. - The backup includes all repositories, uploads and PostgreSQL data. Example: Logical Volume Manager (LVM) snapshots + rsync - A GitLab server using the Linux package (Omnibus), with an LVM logical volume mounted at `/var/opt/gitlab`. - Replicating the `/var/opt/gitlab` directory using rsync would not be reliable because too many files would change while rsync is running. - Instead of rsync-ing `/var/opt/gitlab`, we create a temporary LVM snapshot, which we mount as a read-only file system at `/mnt/gitlab_backup`. - Now we can have a longer running rsync job which creates a consistent replica on the remote server. - The replica includes all repositories, uploads and PostgreSQL data. If you're running GitLab on a virtualized server, you can possibly also create VM snapshots of the entire GitLab server. It's not uncommon however for a VM snapshot to require you to power down the server, which limits this solution's practical use. ### Back up repository data separately First, ensure you back up existing GitLab data while [skipping repositories](#excluding-specific-directories-from-the-backup): ::Tabs :::TabTitle Linux package (Omnibus) ```shell sudo gitlab-backup create SKIP=repositories ``` :::TabTitle Self-compiled ```shell sudo -u git -H bundle exec rake gitlab:backup:create SKIP=repositories RAILS_ENV=production ``` ::EndTabs For manually backing up the Git repository data on disk, there are multiple possible strategies: - Use snapshots, such as the previous examples of Amazon EBS drive snapshots, or LVM snapshots + rsync. - Use [GitLab Geo](../geo/index.md) and rely on the repository data on a Geo secondary site. - [Prevent writes and copy the Git repository data](#prevent-writes-and-copy-the-git-repository-data). - [Create an online backup by marking repositories as read-only (experimental)](#online-backup-through-marking-repositories-as-read-only-experimental). #### Prevent writes and copy the Git repository data Git repositories must be copied in a consistent way. They should not be copied during concurrent write operations, as this can lead to inconsistencies or corruption issues. For more details, [issue #270422](https://gitlab.com/gitlab-org/gitlab/-/issues/270422 "Provide documentation on preferred method of migrating Gitaly servers") has a longer discussion explaining the potential problems. To prevent writes to the Git repository data, there are two possible approaches: - Use [maintenance mode](../maintenance_mode/index.md) to place GitLab in a read-only state. - Create explicit downtime by stopping all Gitaly services before backing up the repositories: ```shell sudo gitlab-ctl stop gitaly # execute git data copy step sudo gitlab-ctl start gitaly ``` You can copy Git repository data using any method, as long as writes are prevented on the data being copied (to prevent inconsistencies and corruption issues). In order of preference and safety, the recommended methods are: 1. Use `rsync` with archive-mode, delete, and checksum options, for example: ```shell rsync -aR --delete --checksum source destination # be extra safe with the order as it will delete existing data if inverted ``` 1. Use a [`tar` pipe to copy the entire repository's directory to another server or location](../operations/moving_repositories.md#tar-pipe-to-another-server). 1. Use `sftp`, `scp`, `cp`, or any other copying method. #### Online backup through marking repositories as read-only (experimental) One way of backing up repositories without requiring instance-wide downtime is to programmatically mark projects as read-only while copying the underlying data. There are a few possible downsides to this: - Repositories are read-only for a period of time that scales with the size of the repository. - Backups take a longer time to complete due to marking each project as read-only, potentially leading to inconsistencies. For example, a possible date discrepancy between the last data available for the first project that gets backed up compared to the last project that gets backed up. - Fork networks should be entirely read-only while the projects inside get backed up to prevent potential changes to the pool repository. There is an **experimental** script that attempts to automate this process in [the Geo team Runbooks project](https://gitlab.com/gitlab-org/geo-team/runbooks/-/tree/main/experimental-online-backup-through-rsync). ## Troubleshooting The following are possible problems you might encounter, along with potential solutions. ### When the secrets file is lost If you didn't [back up the secrets file](#storing-configuration-files), you must complete several steps to get GitLab working properly again. The secrets file is responsible for storing the encryption key for the columns that contain required, sensitive information. If the key is lost, GitLab can't decrypt those columns, preventing access to the following items: - [CI/CD variables](../../ci/variables/index.md) - [Kubernetes / GCP integration](../../user/infrastructure/clusters/index.md) - [Custom Pages domains](../../user/project/pages/custom_domains_ssl_tls_certification/index.md) - [Project error tracking](../../operations/error_tracking.md) - [Runner authentication](../../ci/runners/index.md) - [Project mirroring](../../user/project/repository/mirror/index.md) - [Integrations](../../user/project/integrations/index.md) - [Web hooks](../../user/project/integrations/webhooks.md) In cases like CI/CD variables and runner authentication, you can experience unexpected behaviors, such as: - Stuck jobs. - 500 errors. In this case, you must reset all the tokens for CI/CD variables and runner authentication, which is described in more detail in the following sections. After resetting the tokens, you should be able to visit your project and the jobs begin running again. WARNING: The steps in this section can potentially lead to **data loss** on the above listed items. Consider opening a [Support Request](https://support.gitlab.com/hc/en-us/requests/new) if you're a Premium or Ultimate customer. #### Verify that all values can be decrypted You can determine if your database contains values that can't be decrypted by using a [Rake task](../raketasks/check.md#verify-database-values-can-be-decrypted-using-the-current-secrets). #### Take a backup You must directly modify GitLab data to work around your lost secrets file. WARNING: Be sure to create a full database backup before attempting any changes. #### Disable user two-factor authentication (2FA) Users with 2FA enabled can't sign in to GitLab. In that case, you must [disable 2FA for everyone](../../security/two_factor_authentication.md#for-all-users), after which users must reactivate 2FA. #### Reset CI/CD variables 1. Enter the database console: For the Linux package (Omnibus) GitLab 14.1 and earlier: ```shell sudo gitlab-rails dbconsole ``` For the Linux package (Omnibus) GitLab 14.2 and later: ```shell sudo gitlab-rails dbconsole --database main ``` For self-compiled installations, GitLab 14.1 and earlier: ```shell sudo -u git -H bundle exec rails dbconsole -e production ``` For self-compiled installations, GitLab 14.2 and later: ```shell sudo -u git -H bundle exec rails dbconsole -e production --database main ``` 1. Examine the `ci_group_variables` and `ci_variables` tables: ```sql SELECT * FROM public."ci_group_variables"; SELECT * FROM public."ci_variables"; ``` These are the variables that you need to delete. 1. Delete all variables: ```sql DELETE FROM ci_group_variables; DELETE FROM ci_variables; ``` 1. If you know the specific group or project from which you wish to delete variables, you can include a `WHERE` statement to specify that in your `DELETE`: ```sql DELETE FROM ci_group_variables WHERE group_id = ; DELETE FROM ci_variables WHERE project_id = ; ``` You may need to reconfigure or restart GitLab for the changes to take effect. #### Reset runner registration tokens 1. Enter the database console: For the Linux package (Omnibus) GitLab 14.1 and earlier: ```shell sudo gitlab-rails dbconsole ``` For the Linux package (Omnibus) GitLab 14.2 and later: ```shell sudo gitlab-rails dbconsole --database main ``` For self-compiled installations, GitLab 14.1 and earlier: ```shell sudo -u git -H bundle exec rails dbconsole -e production ``` For self-compiled installations, GitLab 14.2 and later: ```shell sudo -u git -H bundle exec rails dbconsole -e production --database main ``` 1. Clear all tokens for projects, groups, and the entire instance: WARNING: The final `UPDATE` operation stops the runners from being able to pick up new jobs. You must register new runners. ```sql -- Clear project tokens UPDATE projects SET runners_token = null, runners_token_encrypted = null; -- Clear group tokens UPDATE namespaces SET runners_token = null, runners_token_encrypted = null; -- Clear instance tokens UPDATE application_settings SET runners_registration_token_encrypted = null; -- Clear key used for JWT authentication -- This may break the $CI_JWT_TOKEN job variable: -- https://gitlab.com/gitlab-org/gitlab/-/issues/325965 UPDATE application_settings SET encrypted_ci_jwt_signing_key = null; -- Clear runner tokens UPDATE ci_runners SET token = null, token_encrypted = null; ``` #### Reset pending pipeline jobs 1. Enter the database console: For the Linux package (Omnibus) GitLab 14.1 and earlier: ```shell sudo gitlab-rails dbconsole ``` For the Linux package (Omnibus) GitLab 14.2 and later: ```shell sudo gitlab-rails dbconsole --database main ``` For self-compiled installations, GitLab 14.1 and earlier: ```shell sudo -u git -H bundle exec rails dbconsole -e production ``` For self-compiled installations, GitLab 14.2 and later: ```shell sudo -u git -H bundle exec rails dbconsole -e production --database main ``` 1. Clear all the tokens for pending jobs: For GitLab 15.3 and earlier: ```sql -- Clear build tokens UPDATE ci_builds SET token = null, token_encrypted = null; ``` For GitLab 15.4 and later: ```sql -- Clear build tokens UPDATE ci_builds SET token_encrypted = null; ``` A similar strategy can be employed for the remaining features. By removing the data that can't be decrypted, GitLab can be returned to operation, and the lost data can be manually replaced. #### Fix integrations and webhooks If you've lost your secrets, the [integrations settings](../../user/project/integrations/index.md) and [webhooks settings](../../user/project/integrations/webhooks.md) pages might display `500` error messages. Lost secrets might also produce `500` errors when you try to access a repository in a project with a previously configured integration or webhook. The fix is to truncate the affected tables (those containing encrypted columns). This deletes all your configured integrations, webhooks, and related metadata. You should verify that the secrets are the root cause before deleting any data. 1. Enter the database console: For the Linux package (Omnibus) GitLab 14.1 and earlier: ```shell sudo gitlab-rails dbconsole ``` For the Linux package (Omnibus) GitLab 14.2 and later: ```shell sudo gitlab-rails dbconsole --database main ``` For self-compiled installations, GitLab 14.1 and earlier: ```shell sudo -u git -H bundle exec rails dbconsole -e production ``` For self-compiled installations, GitLab 14.2 and later: ```shell sudo -u git -H bundle exec rails dbconsole -e production --database main ``` 1. Truncate the following tables: ```sql -- truncate web_hooks table TRUNCATE integrations, chat_names, issue_tracker_data, jira_tracker_data, slack_integrations, web_hooks, zentao_tracker_data, web_hook_logs CASCADE; ``` ### Container registry push failures after restoring from a backup If you use the [container registry](../../user/packages/container_registry/index.md), pushes to the registry may fail after restoring your backup on a Linux package (Omnibus) instance after restoring the registry data. These failures mention permission issues in the registry logs, similar to: ```plaintext level=error msg="response completed with error" err.code=unknown err.detail="filesystem: mkdir /var/opt/gitlab/gitlab-rails/shared/registry/docker/registry/v2/repositories/...: permission denied" err.message="unknown error" ``` This issue is caused by the restore running as the unprivileged user `git`, which is unable to assign the correct ownership to the registry files during the restore process ([issue #62759](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/62759 "Incorrect permissions on registry filesystem after restore")). To get your registry working again: ```shell sudo chown -R registry:registry /var/opt/gitlab/gitlab-rails/shared/registry/docker ``` If you changed the default file system location for the registry, run `chown` against your custom location, instead of `/var/opt/gitlab/gitlab-rails/shared/registry/docker`. ### Backup fails to complete with Gzip error When running the backup, you may receive a Gzip error message: ```shell sudo /opt/gitlab/bin/gitlab-backup create ... Dumping ... ... gzip: stdout: Input/output error Backup failed ``` If this happens, examine the following: - Confirm there is sufficient disk space for the Gzip operation. It's not uncommon for backups that use the [default strategy](#backup-strategy-option) to require half the instance size in free disk space during backup creation. - If NFS is being used, check if the mount option `timeout` is set. The default is `600`, and changing this to smaller values results in this error. ### Backup fails with `File name too long` error During backup, you can get the `File name too long` error ([issue #354984](https://gitlab.com/gitlab-org/gitlab/-/issues/354984)). For example: ```plaintext Problem: |\r\n]+$'))[1]) > 246; CREATE INDEX ON uploads_with_long_filenames(row_id); SELECT u.id, u.path, -- Current filename (regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1] AS current_filename, -- New filename CONCAT( LEFT(SPLIT_PART((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1], '.', 1), 242), COALESCE(SUBSTRING((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1] FROM '\.(?:.(?!\.))+$')) ) AS new_filename, -- New path CONCAT( COALESCE((regexp_match(u.path, '(.*\/).*'))[1], ''), CONCAT( LEFT(SPLIT_PART((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1], '.', 1), 242), COALESCE(SUBSTRING((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1] FROM '\.(?:.(?!\.))+$')) ) ) AS new_path FROM uploads_with_long_filenames AS u WHERE u.row_id > 0 AND u.row_id <= 10000; ``` Output example: ```postgresql -[ RECORD 1 ]----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- id | 34 path | public/@hashed/loremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisitloremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisit.txt current_filename | loremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisitloremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisit.txt new_filename | loremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisitloremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelits.txt new_path | public/@hashed/loremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisitloremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelits.txt ``` Where: - `current_filename`: a filename that is currently more than 246 characters long. - `new_filename`: a filename that has been truncated to 246 characters maximum. - `new_path`: new path considering the `new_filename` (truncated). After you validate the batch results, you must change the batch size (`row_id`) using the following sequence of numbers (10000 to 20000). Repeat this process until you reach the last record in the `uploads` table. 1. Rename the files found in the `uploads` table from long file names to new truncated file names. The following query rolls back the update so you can check the results safely in a transaction wrapper: ```sql CREATE TEMP TABLE uploads_with_long_filenames AS SELECT ROW_NUMBER() OVER(ORDER BY id) row_id, path, id FROM uploads AS u WHERE LENGTH((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1]) > 246; CREATE INDEX ON uploads_with_long_filenames(row_id); BEGIN; WITH updated_uploads AS ( UPDATE uploads SET path = CONCAT( COALESCE((regexp_match(updatable_uploads.path, '(.*\/).*'))[1], ''), CONCAT( LEFT(SPLIT_PART((regexp_match(updatable_uploads.path, '[^\\/:*?"<>|\r\n]+$'))[1], '.', 1), 242), COALESCE(SUBSTRING((regexp_match(updatable_uploads.path, '[^\\/:*?"<>|\r\n]+$'))[1] FROM '\.(?:.(?!\.))+$')) ) ) FROM uploads_with_long_filenames AS updatable_uploads WHERE uploads.id = updatable_uploads.id AND updatable_uploads.row_id > 0 AND updatable_uploads.row_id <= 10000 RETURNING uploads.* ) SELECT id, path FROM updated_uploads; ROLLBACK; ``` After you validate the batch update results, you must change the batch size (`row_id`) using the following sequence of numbers (10000 to 20000). Repeat this process until you reach the last record in the `uploads` table. 1. Validate that the new file names from the previous query are the expected ones. If you are sure you want to truncate the records found in the previous step to 246 characters, run the following: WARNING: The following action is **irreversible**. ```sql CREATE TEMP TABLE uploads_with_long_filenames AS SELECT ROW_NUMBER() OVER(ORDER BY id) row_id, path, id FROM uploads AS u WHERE LENGTH((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1]) > 246; CREATE INDEX ON uploads_with_long_filenames(row_id); UPDATE uploads SET path = CONCAT( COALESCE((regexp_match(updatable_uploads.path, '(.*\/).*'))[1], ''), CONCAT( LEFT(SPLIT_PART((regexp_match(updatable_uploads.path, '[^\\/:*?"<>|\r\n]+$'))[1], '.', 1), 242), COALESCE(SUBSTRING((regexp_match(updatable_uploads.path, '[^\\/:*?"<>|\r\n]+$'))[1] FROM '\.(?:.(?!\.))+$')) ) ) FROM uploads_with_long_filenames AS updatable_uploads WHERE uploads.id = updatable_uploads.id AND updatable_uploads.row_id > 0 AND updatable_uploads.row_id <= 10000; ``` After you finish the batch update, you must change the batch size (`updatable_uploads.row_id`) using the following sequence of numbers (10000 to 20000). Repeat this process until you reach the last record in the `uploads` table. Truncate the file names in the references found: 1. Check if those records are referenced somewhere. One way to do this is to dump the database and search for the parent directory name and file name: 1. To dump your database, you can use the following command as an example: ```shell pg_dump -h /var/opt/gitlab/postgresql/ -d gitlabhq_production > gitlab-dump.tmp ``` 1. Then you can search for the references using the `grep` command. Combining the parent directory and the file name can be a good idea. For example: ```shell grep public/alongfilenamehere.txt gitlab-dump.tmp ``` 1. Replace those long file names using the new file names obtained from querying the `uploads` table. Truncate the file names on the file system. You must manually rename the files in your file system to the new file names obtained from querying the `uploads` table. #### Re-run the backup task After following all the previous steps, re-run the backup task. ### Restoring database backup fails when `pg_stat_statements` was previously enabled The GitLab backup of the PostgreSQL database includes all SQL statements required to enable extensions that were previously enabled in the database. The `pg_stat_statements` extension can only be enabled or disabled by a PostgreSQL user with `superuser` role. As the restore process uses a database user with limited permissions, it can't execute the following SQL statements: ```sql DROP EXTENSION IF EXISTS pg_stat_statements; CREATE EXTENSION IF NOT EXISTS pg_stat_statements WITH SCHEMA public; ``` When trying to restore the backup in a PostgreSQL instance that doesn't have the `pg_stats_statements` extension, the following error message is displayed: ```plaintext ERROR: permission denied to create extension "pg_stat_statements" HINT: Must be superuser to create this extension. ERROR: extension "pg_stat_statements" does not exist ``` When trying to restore in an instance that has the `pg_stats_statements` extension enabled, the cleaning up step fails with an error message similar to the following: ```plaintext rake aborted! ActiveRecord::StatementInvalid: PG::InsufficientPrivilege: ERROR: must be owner of view pg_stat_statements /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:42:in `block (4 levels) in ' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:41:in `each' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:41:in `block (3 levels) in ' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/backup.rake:71:in `block (3 levels) in ' /opt/gitlab/embedded/bin/bundle:23:in `load' /opt/gitlab/embedded/bin/bundle:23:in `
' Caused by: PG::InsufficientPrivilege: ERROR: must be owner of view pg_stat_statements /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:42:in `block (4 levels) in ' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:41:in `each' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:41:in `block (3 levels) in ' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/backup.rake:71:in `block (3 levels) in ' /opt/gitlab/embedded/bin/bundle:23:in `load' /opt/gitlab/embedded/bin/bundle:23:in `
' Tasks: TOP => gitlab:db:drop_tables (See full trace by running task with --trace) ``` #### Prevent the dump file to include `pg_stat_statements` To prevent the inclusion of the extension in the PostgreSQL dump file that is part of the backup bundle, enable the extension in any schema except the `public` schema: ```sql CREATE SCHEMA adm; CREATE EXTENSION pg_stat_statements SCHEMA adm; ``` If the extension was previously enabled in the `public` schema, move it to a new one: ```sql CREATE SCHEMA adm; ALTER EXTENSION pg_stat_statements SET SCHEMA adm; ``` To query the `pg_stat_statements` data after changing the schema, prefix the view name with the new schema: ```sql SELECT * FROM adm.pg_stat_statements limit 0; ``` To make it compatible with third-party monitoring solutions that expect it to be enabled in the `public` schema, you need to include it in the `search_path`: ```sql set search_path to public,adm; ``` #### Fix an existing dump file to remove references to `pg_stat_statements` To fix an existing backup file, do the following changes: 1. Extract from the backup the following file: `db/database.sql.gz`. 1. Decompress the file or use an editor that is capable of handling it compressed. 1. Remove the following lines, or similar ones: ```sql CREATE EXTENSION IF NOT EXISTS pg_stat_statements WITH SCHEMA public; ``` ```sql COMMENT ON EXTENSION pg_stat_statements IS 'track planning and execution statistics of all SQL statements executed'; ``` 1. Save the changes and recompress the file. 1. Update the backup file with the modified `db/database.sql.gz`.