# Disaster Recovery (Geo) **(PREMIUM ONLY)** Geo replicates your database, your Git repositories, and few other assets. We will support and replicate more data in the future, that will enable you to failover with minimal effort, in a disaster situation. See [Geo current limitations][geo-limitations] for more information. CAUTION: **Warning:** Disaster recovery for multi-secondary configurations is in **Alpha**. For the latest updates, check the multi-secondary [Disaster Recovery epic][gitlab-org&65]. ## Promoting a **secondary** Geo node in single-secondary configurations We don't currently provide an automated way to promote a Geo replica and do a failover, but you can do it manually if you have `root` access to the machine. This process promotes a **secondary** Geo node to a **primary** node. To regain geographic redundancy as quickly as possible, you should add a new **secondary** node immediately after following these instructions. ### Step 1. Allow replication to finish if possible If the **secondary** node is still replicating data from the **primary** node, follow [the planned failover docs][planned-failover] as closely as possible in order to avoid unnecessary data loss. ### Step 2. Permanently disable the **primary** node CAUTION: **Warning:** If the **primary** node goes offline, there may be data saved on the **primary** node that has not been replicated to the **secondary** node. This data should be treated as lost if you proceed. If an outage on the **primary** node happens, you should do everything possible to avoid a split-brain situation where writes can occur in two different GitLab instances, complicating recovery efforts. So to prepare for the failover, we must disable the **primary** node. 1. SSH into the **primary** node to stop and disable GitLab, if possible: ```sh sudo gitlab-ctl stop ``` Prevent GitLab from starting up again if the server unexpectedly reboots: ```sh sudo systemctl disable gitlab-runsvdir ``` NOTE: **Note:** (**CentOS only**) In CentOS 6 or older, there is no easy way to prevent GitLab from being started if the machine reboots isn't available (see [gitlab-org/omnibus-gitlab#3058]). It may be safest to uninstall the GitLab package completely: ```sh yum remove gitlab-ee ``` NOTE: **Note:** (**Ubuntu 14.04 LTS**) If you are using an older version of Ubuntu or any other distro based on the Upstart init system, you can prevent GitLab from starting if the machine reboots by doing the following: ```sh initctl stop gitlab-runsvvdir echo 'manual' > /etc/init/gitlab-runsvdir.override initctl reload-configuration ``` 1. If you do not have SSH access to the **primary** node, take the machine offline and prevent it from rebooting by any means at your disposal. Since there are many ways you may prefer to accomplish this, we will avoid a single recommendation. You may need to: - Reconfigure the load balancers. - Change DNS records (e.g., point the primary DNS record to the **secondary** node in order to stop usage of the **primary** node). - Stop the virtual servers. - Block traffic through a firewall. - Revoke object storage permissions from the **primary** node. - Physically disconnect a machine. 1. If you plan to [update the primary domain DNS record](#step-4-optional-updating-the-primary-domain-dns-record), you may wish to lower the TTL now to speed up propagation. ### Step 3. Promoting a **secondary** node NOTE: **Note:** A new **secondary** should not be added at this time. If you want to add a new **secondary**, do this after you have completed the entire process of promoting the **secondary** to the **primary**. #### Promoting a **secondary** node running on a single machine 1. SSH in to your **secondary** node and login as root: ```sh sudo -i ``` 1. Edit `/etc/gitlab/gitlab.rb` to reflect its new status as **primary** by removing any lines that enabled the `geo_secondary_role`: ```ruby ## In pre-11.5 documentation, the role was enabled as follows. Remove this line. geo_secondary_role['enable'] = true ## In 11.5+ documentation, the role was enabled as follows. Remove this line. roles ['geo_secondary_role'] ``` 1. Promote the **secondary** node to the **primary** node. Execute: ```sh gitlab-ctl promote-to-primary-node ``` 1. Verify you can connect to the newly promoted **primary** node using the URL used previously for the **secondary** node. 1. If successful, the **secondary** node has now been promoted to the **primary** node. #### Promoting a **secondary** node with HA The `gitlab-ctl promote-to-primary-node` command cannot be used yet in conjunction with High Availability or with multiple machines, as it can only perform changes on a **secondary** with only a single machine. Instead, you must do this manually. 1. SSH in to the database node in the **secondary** and trigger PostgreSQL to promote to read-write: ```bash sudo gitlab-pg-ctl promote ``` 1. Edit `/etc/gitlab/gitlab.rb` on every machine in the **secondary** to reflect its new status as **primary** by removing any lines that enabled the `geo_secondary_role`: ```ruby ## In pre-11.5 documentation, the role was enabled as follows. Remove this line. geo_secondary_role['enable'] = true ## In 11.5+ documentation, the role was enabled as follows. Remove this line. roles ['geo_secondary_role'] ``` After making these changes [Reconfigure GitLab](../../restart_gitlab.md#omnibus-gitlab-reconfigure) each machine so the changes take effect. 1. Promote the **secondary** to **primary**. SSH into a single application server and execute: ```bash sudo gitlab-rake geo:set_secondary_as_primary ``` 1. Verify you can connect to the newly promoted **primary** using the URL used previously for the **secondary**. 1. Success! The **secondary** has now been promoted to **primary**. ### Step 4. (Optional) Updating the primary domain DNS record Updating the DNS records for the primary domain to point to the **secondary** node will prevent the need to update all references to the primary domain to the secondary domain, like changing Git remotes and API URLs. 1. SSH into the **secondary** node and login as root: ```sh sudo -i ``` 1. Update the primary domain's DNS record. After updating the primary domain's DNS records to point to the **secondary** node, edit `/etc/gitlab/gitlab.rb` on the **secondary** node to reflect the new URL: ```ruby # Change the existing external_url configuration external_url 'https://' ``` NOTE: **Note** Changing `external_url` won't prevent access via the old secondary URL, as long as the secondary DNS records are still intact. 1. Reconfigure the **secondary** node for the change to take effect: ```sh gitlab-ctl reconfigure ``` 1. Execute the command below to update the newly promoted **primary** node URL: ```sh gitlab-rake geo:update_primary_node_url ``` This command will use the changed `external_url` configuration defined in `/etc/gitlab/gitlab.rb`. 1. Verify you can connect to the newly promoted **primary** using its URL. If you updated the DNS records for the primary domain, these changes may not have yet propagated depending on the previous DNS records TTL. ### Step 5. (Optional) Add **secondary** Geo node to a promoted **primary** node Promoting a **secondary** node to **primary** node using the process above does not enable Geo on the new **primary** node. To bring a new **secondary** node online, follow the [Geo setup instructions][setup-geo]. ### Step 6. (Optional) Removing the secondary's tracking database Every **secondary** has a special tracking database that is used to save the status of the synchronization of all the items from the **primary**. Because the **secondary** is already promoted, that data in the tracking database is no longer required. The data can be removed with the following command: ```sh sudo rm -rf /var/opt/gitlab/geo-postgresql ``` ## Promoting secondary Geo replica in multi-secondary configurations If you have more than one **secondary** node and you need to promote one of them, we suggest you follow [Promoting a **secondary** Geo node in single-secondary configurations](#promoting-a-secondary-geo-node-in-single-secondary-configurations) and after that you also need two extra steps. ### Step 1. Prepare the new **primary** node to serve one or more **secondary** nodes 1. SSH into the new **primary** node and login as root: ```sh sudo -i ``` 1. Edit `/etc/gitlab/gitlab.rb` ```ruby ## Enable a Geo Primary role (if you haven't yet) roles ['geo_primary_role'] ## # Allow PostgreSQL client authentication from the primary and secondary IPs. These IPs may be # public or VPC addresses in CIDR format, for example ['198.51.100.1/32', '198.51.100.2/32'] ## postgresql['md5_auth_cidr_addresses'] = ['/32', '/32'] # Every secondary server needs to have its own slot so specify the number of secondary nodes you're going to have postgresql['max_replication_slots'] = 1 ## ## Disable automatic database migrations temporarily ## (until PostgreSQL is restarted and listening on the private address). ## gitlab_rails['auto_migrate'] = false ``` (For more details about these settings you can read [Configure the primary server][configure-the-primary-server]) 1. Save the file and reconfigure GitLab for the database listen changes and the replication slot changes to be applied. ```sh gitlab-ctl reconfigure ``` Restart PostgreSQL for its changes to take effect: ```sh gitlab-ctl restart postgresql ``` 1. Re-enable migrations now that PostgreSQL is restarted and listening on the private address. Edit `/etc/gitlab/gitlab.rb` and **change** the configuration to `true`: ```ruby gitlab_rails['auto_migrate'] = true ``` Save the file and reconfigure GitLab: ```sh gitlab-ctl reconfigure ``` ### Step 2. Initiate the replication process Now we need to make each **secondary** node listen to changes on the new **primary** node. To do that you need to [initiate the replication process][initiate-the-replication-process] again but this time for another **primary** node. All the old replication settings will be overwritten. ## Troubleshooting ### I followed the disaster recovery instructions and now two-factor auth is broken The setup instructions for Geo prior to 10.5 failed to replicate the `otp_key_base` secret, which is used to encrypt the two-factor authentication secrets stored in the database. If it differs between **primary** and **secondary** nodes, users with two-factor authentication enabled won't be able to log in after a failover. If you still have access to the old **primary** node, you can follow the instructions in the [Upgrading to GitLab 10.5][updating-geo] section to resolve the error. Otherwise, the secret is lost and you'll need to [reset two-factor authentication for all users][sec-tfa]. [gitlab-org&65]: https://gitlab.com/groups/gitlab-org/-/epics/65 [geo-limitations]: ../replication/index.md#current-limitations [planned-failover]: planned_failover.md [setup-geo]: ../replication/index.md#setup-instructions [updating-geo]: ../replication/version_specific_updates.md#updating-to-gitlab-105 [sec-tfa]: ../../../security/two_factor_authentication.md#disabling-2fa-for-everyone [gitlab-org/omnibus-gitlab#3058]: https://gitlab.com/gitlab-org/omnibus-gitlab/issues/3058 [initiate-the-replication-process]: ../replication/database.html#step-3-initiate-the-replication-process [configure-the-primary-server]: ../replication/database.html#step-1-configure-the-primary-server