--- stage: Verify group: Runner info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments comments: false type: index --- # Services **(FREE)** The `services` keyword defines a Docker image that runs during a `job` linked to the Docker image that the image keyword defines. This allows you to access the service image during build time. The service image can run any application, but the most common use case is to run a database container, for example: - [MySQL](mysql.md) - [PostgreSQL](postgres.md) - [Redis](redis.md) - [GitLab](gitlab.md) as an example for a microservice offering a JSON API It's easier and faster to use an existing image and run it as an additional container than to install `mysql`, for example, every time the project is built. You're not limited to only database services. You can add as many services you need to `.gitlab-ci.yml` or manually modify `config.toml`. Any image found at [Docker Hub](https://hub.docker.com/) or your private Container Registry can be used as a service. Services inherit the same DNS servers, search domains, and additional hosts as the CI container itself. ## How services are linked to the job To better understand how container linking works, read [Linking containers together](https://docs.docker.com/engine/userguide/networking/default_network/dockerlinks/). If you add `mysql` as service to your application, the image is used to create a container that's linked to the job container. The service container for MySQL is accessible under the hostname `mysql`. To access your database service, connect to the host named `mysql` instead of a socket or `localhost`. Read more in [accessing the services](#accessing-the-services). ## How the health check of services works Services are designed to provide additional features which are **network accessible**. They may be a database like MySQL, or Redis, and even `docker:stable-dind` which allows you to use Docker-in-Docker. It can be practically anything that's required for the CI/CD job to proceed, and is accessed by network. To make sure this works, the runner: 1. Checks which ports are exposed from the container by default. 1. Starts a special container that waits for these ports to be accessible. If the second stage of the check fails, it prints the warning: `*** WARNING: Service XYZ probably didn't start properly`. This issue can occur because: - There is no opened port in the service. - The service was not started properly before the timeout, and the port is not responding. In most cases it affects the job, but there may be situations when the job still succeeds even if that warning was printed. For example: - The service was started shortly after the warning was raised, and the job is not using the linked service from the beginning. In that case, when the job needed to access the service, it may have been already there waiting for connections. - The service container is not providing any networking service, but it's doing something with the job's directory (all services have the job directory mounted as a volume under `/builds`). In that case, the service does its job, and because the job is not trying to connect to it, it does not fail. ## What services are not for As mentioned before, this feature is designed to provide **network accessible** services. A database is the simplest example of such a service. The services feature is not designed to, and does not, add any software from the defined `services` images to the job's container. For example, if you have the following `services` defined in your job, the `php`, `node` or `go` commands are **not** available for your script, and the job fails: ```yaml job: services: - php:7 - node:latest - golang:1.10 image: alpine:3.7 script: - php -v - node -v - go version ``` If you need to have `php`, `node` and `go` available for your script, you should either: - Choose an existing Docker image that contains all required tools. - Create your own Docker image, with all the required tools included, and use that in your job. ## Define `services` in the `.gitlab-ci.yml` file It's also possible to define different images and services per job: ```yaml default: before_script: - bundle install test:2.6: image: ruby:2.6 services: - postgres:11.7 script: - bundle exec rake spec test:2.7: image: ruby:2.7 services: - postgres:12.2 script: - bundle exec rake spec ``` Or you can pass some [extended configuration options](../docker/using_docker_images.md#extended-docker-configuration-options) for `image` and `services`: ```yaml default: image: name: ruby:2.6 entrypoint: ["/bin/bash"] services: - name: my-postgres:11.7 alias: db-postgres entrypoint: ["/usr/local/bin/db-postgres"] command: ["start"] before_script: - bundle install test: script: - bundle exec rake spec ``` ## Accessing the services Let's say that you need a Wordpress instance to test some API integration with your application. You can then use for example the [`tutum/wordpress`](https://hub.docker.com/r/tutum/wordpress/) image in your `.gitlab-ci.yml` file: ```yaml services: - tutum/wordpress:latest ``` If you don't [specify a service alias](#available-settings-for-services), when the job runs, `tutum/wordpress` is started. You have access to it from your build container under two hostnames: - `tutum-wordpress` - `tutum__wordpress` Hostnames with underscores are not RFC valid and may cause problems in third-party applications. The default aliases for the service's hostname are created from its image name following these rules: - Everything after the colon (`:`) is stripped. - Slash (`/`) is replaced with double underscores (`__`) and the primary alias is created. - Slash (`/`) is replaced with a single dash (`-`) and the secondary alias is created (requires GitLab Runner v1.1.0 or higher). To override the default behavior, you can [specify a service alias](#available-settings-for-services). ### Connecting services You can use inter-dependent services with complex jobs, like end-to-end tests where an external API needs to communicate with its own database. For example, for an end-to-end test for a front-end application that uses an API, and where the API needs a database: ```yaml end-to-end-tests: image: node:latest services: - name: selenium/standalone-firefox:${FIREFOX_VERSION} alias: firefox - name: registry.gitlab.com/organization/private-api:latest alias: backend-api - postgres:14.3 variables: FF_NETWORK_PER_BUILD: 1 POSTGRES_PASSWORD: supersecretpassword BACKEND_POSTGRES_HOST: postgres script: - npm install - npm test ``` For this solution to work, you must use [the networking mode that creates a new network for each job](https://docs.gitlab.com/runner/executors/docker.html#create-a-network-for-each-job). ## Passing CI/CD variables to services You can also pass custom CI/CD [variables](../variables/index.md) to fine tune your Docker `images` and `services` directly in the `.gitlab-ci.yml` file. For more information, read about [`.gitlab-ci.yml` defined variables](../variables/index.md#create-a-custom-cicd-variable-in-the-gitlab-ciyml-file). ```yaml # The following variables are automatically passed down to the Postgres container # as well as the Ruby container and available within each. variables: HTTPS_PROXY: "https://10.1.1.1:8090" HTTP_PROXY: "https://10.1.1.1:8090" POSTGRES_DB: "my_custom_db" POSTGRES_USER: "postgres" POSTGRES_PASSWORD: "example" PGDATA: "/var/lib/postgresql/data" POSTGRES_INITDB_ARGS: "--encoding=UTF8 --data-checksums" services: - name: postgres:11.7 alias: db entrypoint: ["docker-entrypoint.sh"] command: ["postgres"] image: name: ruby:2.6 entrypoint: ["/bin/bash"] before_script: - bundle install test: script: - bundle exec rake spec ``` ## Available settings for `services` > Introduced in GitLab and GitLab Runner 9.4. | Setting | Required | GitLab version | Description | |------------|----------|----------------| ----------- | | `name` | yes, when used with any other option | 9.4 | Full name of the image to use. If the full image name includes a registry hostname, use the `alias` option to define a shorter service access name. For more information, see [Accessing the services](#accessing-the-services). | | `entrypoint` | no | 9.4 |Command or script to execute as the container's entrypoint. It's translated to Docker's `--entrypoint` option while creating the container. The syntax is similar to [`Dockerfile`'s `ENTRYPOINT`](https://docs.docker.com/engine/reference/builder/#entrypoint) directive, where each shell token is a separate string in the array. | | `command` | no | 9.4 |Command or script that should be used as the container's command. It's translated to arguments passed to Docker after the image's name. The syntax is similar to [`Dockerfile`'s `CMD`](https://docs.docker.com/engine/reference/builder/#cmd) directive, where each shell token is a separate string in the array. | | `alias` (1) | no | 9.4 | Additional alias that can be used to access the service from the job's container. Read [Accessing the services](#accessing-the-services) for more information. | | `variables` (2) | no | 14.5 | Additional environment variables that are passed exclusively to the service. The syntax is the same as [Job Variables](../variables/index.md). | (1) Alias support for the Kubernetes executor was [introduced](https://gitlab.com/gitlab-org/gitlab-runner/-/issues/2229) in GitLab Runner 12.8, and is only available for Kubernetes version 1.7 or later. (2) Service variables support for the Docker and the Kubernetes executor was [introduced](https://gitlab.com/gitlab-org/gitlab-runner/-/merge_requests/3158) in GitLab Runner 14.8. ## Starting multiple services from the same image > Introduced in GitLab and GitLab Runner 9.4. Read more about the [extended configuration options](../docker/using_docker_images.md#extended-docker-configuration-options). Before the new extended Docker configuration options, the following configuration would not work properly: ```yaml services: - mysql:latest - mysql:latest ``` The runner would start two containers, each that uses the `mysql:latest` image. However, both of them would be added to the job's container with the `mysql` alias, based on the [default hostname naming](#accessing-the-services). This would end with one of the services not being accessible. After the new extended Docker configuration options, the above example would look like: ```yaml services: - name: mysql:latest alias: mysql-1 - name: mysql:latest alias: mysql-2 ``` The runner still starts two containers using the `mysql:latest` image, however now each of them are also accessible with the alias configured in `.gitlab-ci.yml` file. ## Setting a command for the service > Introduced in GitLab and GitLab Runner 9.4. Read more about the [extended configuration options](../docker/using_docker_images.md#extended-docker-configuration-options). Let's assume you have a `super/sql:latest` image with some SQL database in it. You would like to use it as a service for your job. Let's also assume that this image does not start the database process while starting the container. The user needs to manually use `/usr/bin/super-sql run` as a command to start the database. Before the new extended Docker configuration options, you would need to: - Create your own image based on the `super/sql:latest` image. - Add the default command. - Use the image in the job's configuration: ```dockerfile # my-super-sql:latest image's Dockerfile FROM super/sql:latest CMD ["/usr/bin/super-sql", "run"] ``` ```yaml # .gitlab-ci.yml services: - my-super-sql:latest ``` After the new extended Docker configuration options, you can set a `command` in the `.gitlab-ci.yml` file instead: ```yaml # .gitlab-ci.yml services: - name: super/sql:latest command: ["/usr/bin/super-sql", "run"] ``` The syntax of `command` is similar to [Dockerfile's `CMD`](https://docs.docker.com/engine/reference/builder/#cmd). ## Using `services` with `docker run` (Docker-in-Docker) side-by-side Containers started with `docker run` can also connect to services provided by GitLab. When booting the service is expensive or time consuming, you can use this technique to run tests from different client environments, while only booting up the tested service once. ```yaml access-service: stage: build image: docker:20.10.16 services: - docker:dind # necessary for docker run - tutum/wordpress:latest variables: FF_NETWORK_PER_BUILD: "true" # activate container-to-container networking script: | docker run --rm --name curl \ --volume "$(pwd)":"$(pwd)" \ --workdir "$(pwd)" \ --network=host \ curlimages/curl:7.74.0 curl "http://tutum-wordpress" ``` For this solution to work, you must use [the networking mode that creates a new network for each job](https://docs.gitlab.com/runner/executors/docker.html#create-a-network-for-each-job). ## How Docker integration works Below is a high level overview of the steps performed by Docker during job time. 1. Create any service container: `mysql`, `postgresql`, `mongodb`, `redis`. 1. Create a cache container to store all volumes as defined in `config.toml` and `Dockerfile` of build image (`ruby:2.6` as in above example). 1. Create a build container and link any service container to build container. 1. Start the build container, and send a job script to the container. 1. Run the job script. 1. Checkout code in: `/builds/group-name/project-name/`. 1. Run any step defined in `.gitlab-ci.yml`. 1. Check the exit status of build script. 1. Remove the build container and all created service containers. ## Debug a job locally The following commands are run without root privileges. You should be able to run Docker with your user account. First start with creating a file named `build_script`: ```shell cat < build_script git clone https://gitlab.com/gitlab-org/gitlab-runner.git /builds/gitlab-org/gitlab-runner cd /builds/gitlab-org/gitlab-runner make EOF ``` Here we use as an example the GitLab Runner repository which contains a Makefile, so running `make` executes the commands defined in the Makefile. Instead of `make`, you could run the command which is specific to your project. Then create some service containers: ```shell docker run -d --name service-mysql mysql:latest docker run -d --name service-postgres postgres:latest ``` This creates two service containers, named `service-mysql` and `service-postgres` which use the latest MySQL and PostgreSQL images respectively. They both run in the background (`-d`). Finally, create a build container by executing the `build_script` file we created earlier: ```shell docker run --name build -i --link=service-mysql:mysql --link=service-postgres:postgres ruby:2.6 /bin/bash < build_script ``` The above command creates a container named `build` that's spawned from the `ruby:2.6` image and has two services linked to it. The `build_script` is piped using `stdin` to the bash interpreter which in turn executes the `build_script` in the `build` container. When you finish testing and no longer need the containers, you can remove them with: ```shell docker rm -f -v build service-mysql service-postgres ``` This forcefully (`-f`) removes the `build` container, the two service containers, and all volumes (`-v`) that were created with the container creation. ## Security when using services containers Docker privileged mode applies to services. This means that the service image container can access the host system. You should use container images from trusted sources only.