--- type: howto --- # Migrate GitLab CI to GitLab CE or EE Beginning with version 8.0 of GitLab Community Edition (CE) and Enterprise Edition (EE), GitLab CI is no longer its own application, but is instead built into the CE and EE applications. This guide will detail the process of migrating your CI installation and data into your GitLab CE or EE installation. **You can only migrate CI data from GitLab CI 8.0 to GitLab 8.0; migrating between other versions (e.g.7.14 to 8.1) is not possible.** We recommend that you read through the entire migration process in this document before beginning. ## Overview In this document we assume you have a GitLab server and a GitLab CI server. It does not matter if these are the same machine. The migration consists of three parts: updating GitLab and GitLab CI, moving data, and redirecting traffic. Please note that CI builds triggered on your GitLab server in the time between updating to 8.0 and finishing the migration will be lost. Your GitLab server can be online for most of the procedure; the only GitLab downtime (if any) is during the upgrade to 8.0. Your CI service will be offline from the moment you upgrade to 8.0 until you finish the migration procedure. ## Before upgrading If you have GitLab CI installed using Omnibus GitLab packages but **you don't want to migrate your existing data**: ```bash mv /var/opt/gitlab/gitlab-ci/builds /var/opt/gitlab/gitlab-ci/builds.$(date +%s) ``` run `sudo gitlab-ctl reconfigure` and you can reach CI at `gitlab.example.com/ci`. If you want to migrate your existing data, continue reading. ### 0. Updating Omnibus from versions prior to 7.13 If you are updating from older versions you should first update to 7.14 and then to 8.0. Otherwise it's pretty likely that you will encounter problems described in the [Troubleshooting](#troubleshooting). ### 1. Verify that backups work Make sure that the backup script on both servers can connect to the database. ``` # On your CI server: # Omnibus sudo chown gitlab-ci:gitlab-ci /var/opt/gitlab/gitlab-ci/builds sudo gitlab-ci-rake backup:create # Source cd /home/gitlab_ci/gitlab-ci sudo -u gitlab_ci -H bundle exec rake backup:create RAILS_ENV=production ``` Also check on your GitLab server. ``` # On your GitLab server: # Omnibus sudo gitlab-backup create SKIP=repositories,uploads # Source cd /home/git/gitlab sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production SKIP=repositories,uploads ``` If this fails you need to fix it before upgrading to 8.0. Also see ### 2. Check source and target database types Check what databases you use on your GitLab server and your CI server. Look for the 'adapter:' line. If your CI server and your GitLab server use the same database adapter no special care is needed. If your CI server uses MySQL and your GitLab server uses PostgreSQL you need to pass a special option during the 'Moving data' part. **If your CI server uses PostgreSQL and your GitLab server uses MySQL you cannot migrate your CI data to GitLab 8.0.** ``` # On your CI server: # Omnibus sudo gitlab-ci-rake env:info # Source cd /home/gitlab_ci/gitlab-ci sudo -u gitlab_ci -H bundle exec rake env:info RAILS_ENV=production ``` ``` # On your GitLab server: # Omnibus sudo gitlab-rake gitlab:env:info # Source cd /home/git/gitlab sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production ``` ### 3. Storage planning Decide where to store CI build traces on GitLab server. GitLab CI uses files on disk to store CI build traces. The default path for these build traces is `/var/opt/gitlab/gitlab-ci/builds` (Omnibus) or `/home/git/gitlab/builds` (Source). If you are storing your repository data in a special location, or if you are using NFS, you should make sure that you store build traces on the same storage as your Git repositories. ## I. Upgrading From this point on, GitLab CI will be unavailable for your end users. ### 1. Upgrade GitLab to 8.0 First upgrade your GitLab server to version 8.0: ### 2. Disable CI on the GitLab server during the migration After you update, go to the admin panel and temporarily disable CI. As an administrator, go to **Admin Area** -> **Settings**, and under **Continuous Integration** uncheck **Disable to prevent CI usage until rake ci:migrate is run (8.0 only)**. ### 3. CI settings are now in GitLab If you want to use custom CI settings (e.g. change where builds are stored), please update `/etc/gitlab/gitlab.rb` (Omnibus) or `/home/git/gitlab/config/gitlab.yml` (Source). ### 4. Upgrade GitLab CI to 8.0 Now upgrade GitLab CI to version 8.0. If you are using Omnibus packages, this may have already happened when you upgraded GitLab to 8.0. ### 5. Disable GitLab CI on the CI server Disable GitLab CI after upgrading to 8.0. ``` # On your CI server: # Omnibus sudo gitlab-ctl stop ci-unicorn sudo gitlab-ctl stop ci-sidekiq # Source sudo service gitlab_ci stop cd /home/gitlab_ci/gitlab-ci sudo -u gitlab_ci -H bundle exec whenever --clear-crontab RAILS_ENV=production ``` ## II. Moving data ### 1. Database encryption key Move the database encryption key from your CI server to your GitLab server. The command below will show you what you need to copy-paste to your GitLab server. On Omnibus GitLab servers you will have to add a line to `/etc/gitlab/gitlab.rb`. On GitLab servers installed from source you will have to replace the contents of `/home/git/gitlab/config/secrets.yml`. ``` # On your CI server: # Omnibus sudo gitlab-ci-rake backup:show_secrets # Source cd /home/gitlab_ci/gitlab-ci sudo -u gitlab_ci -H bundle exec rake backup:show_secrets RAILS_ENV=production ``` ### 2. SQL data and build traces Create your final CI data export. If you are converting from MySQL to PostgreSQL, add `MYSQL_TO_POSTGRESQL=1` to the end of the rake command. When the command finishes it will print the path to your data export archive; you will need this file later. ``` # On your CI server: # Omnibus sudo chown gitlab-ci:gitlab-ci /var/opt/gitlab/gitlab-ci/builds sudo gitlab-ci-rake backup:create # Source cd /home/gitlab_ci/gitlab-ci sudo -u gitlab_ci -H bundle exec rake backup:create RAILS_ENV=production ``` ### 3. Copy data to the GitLab server If you were running GitLab and GitLab CI on the same server you can skip this step. Copy your CI data archive to your GitLab server. There are many ways to do this, below we use SSH agent forwarding and 'scp', which will be easy and fast for most setups. You can also copy the data archive first from the CI server to your laptop and then from your laptop to the GitLab server. ``` # Start from your laptop ssh -A ci_admin@ci_server.example # Now on the CI server scp /path/to/12345_gitlab_ci_backup.tar gitlab_admin@gitlab_server.example:~ ``` ### 4. Move data to the GitLab backups folder Make the CI data archive discoverable for GitLab. We assume below that you store backups in the default path, adjust the command if necessary. ``` # On your GitLab server: # Omnibus sudo mv /path/to/12345_gitlab_ci_backup.tar /var/opt/gitlab/backups/ # Source sudo mv /path/to/12345_gitlab_ci_backup.tar /home/git/gitlab/tmp/backups/ ``` ### 5. Import the CI data into GitLab This step will delete any existing CI data on your GitLab server. There should be no CI data yet because you turned CI on the GitLab server off earlier. ``` # On your GitLab server: # Omnibus sudo chown git:git /var/opt/gitlab/gitlab-ci/builds sudo gitlab-rake ci:migrate # Source cd /home/git/gitlab sudo -u git -H bundle exec rake ci:migrate RAILS_ENV=production ``` ### 6. Restart GitLab ``` # On your GitLab server: # Omnibus sudo gitlab-ctl hup unicorn sudo gitlab-ctl restart sidekiq # Source sudo service gitlab reload ``` ## III. Redirecting traffic If you were running GitLab CI with Omnibus packages and you were using the internal NGINX configuration your CI service should now be available both at `ci.example.com` (the old address) and `gitlab.example.com/ci`. **You are done!** If you installed GitLab CI from source we now need to configure a redirect in NGINX so that existing CI runners can keep using the old CI server address, and so that existing links to your CI server keep working. ### 1. Update Nginx configuration To ensure that your existing CI runners are able to communicate with the migrated installation, and that existing build triggers still work, you'll need to update your Nginx configuration to redirect requests for the old locations to the new ones. Edit `/etc/nginx/sites-available/gitlab_ci` and paste: ```nginx # GITLAB CI server { listen 80 default_server; # e.g., listen 192.168.1.1:80; server_name YOUR_CI_SERVER_FQDN; # e.g., server_name source.example.com; access_log /var/log/nginx/gitlab_ci_access.log; error_log /var/log/nginx/gitlab_ci_error.log; # expose API to fix runners location /api { proxy_read_timeout 300; proxy_connect_timeout 300; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; # You need to specify your DNS servers that are able to resolve YOUR_GITLAB_SERVER_FQDN resolver 8.8.8.8 8.8.4.4; proxy_pass $scheme://YOUR_GITLAB_SERVER_FQDN/ci$request_uri; } # redirect all other CI requests location / { return 301 $scheme://YOUR_GITLAB_SERVER_FQDN/ci$request_uri; } # adjust this to match the largest build log your runners might submit, # set to 0 to disable limit client_max_body_size 10m; } ``` Make sure you substitute these placeholder values with your real ones: 1. `YOUR_CI_SERVER_FQDN`: The existing public-facing address of your GitLab CI install (e.g., `ci.gitlab.com`). 1. `YOUR_GITLAB_SERVER_FQDN`: The current public-facing address of your GitLab CE (or EE) install (e.g., `gitlab.com`). **Make sure not to remove the `/ci$request_uri` part. This is required to properly forward the requests.** You should also make sure that you can: 1. `curl https://YOUR_GITLAB_SERVER_FQDN/` from your previous GitLab CI server. 1. `curl https://YOUR_CI_SERVER_FQDN/` from your GitLab CE (or EE) server. ### 2. Check Nginx configuration ```sh sudo nginx -t ``` ### 3. Restart Nginx ```sh sudo /etc/init.d/nginx restart ``` ### Restore from backup If something went wrong and you need to restore a backup, consult the [Backup restoration](../raketasks/backup_restore.md) guide. ## Troubleshooting ### show:secrets problem (Omnibus-only) If you see errors like this: ``` Missing `secret_key_base` or `db_key_base` for 'production' environment. The secrets will be generated and stored in `config/secrets.yml` rake aborted! Errno::EACCES: Permission denied @ rb_sysopen - config/secrets.yml ``` This can happen if you are updating from versions prior to 7.13 straight to 8.0. The fix for this is to update to Omnibus 7.14 first and then update it to 8.0. ### Permission denied when accessing `/var/opt/gitlab/gitlab-ci/builds` To fix that issue you have to change builds/ folder permission before doing final backup: ``` sudo chown -R gitlab-ci:gitlab-ci /var/opt/gitlab/gitlab-ci/builds ``` Then before executing `ci:migrate` you need to fix builds folder permission: ``` sudo chown git:git /var/opt/gitlab/gitlab-ci/builds ``` ### Problems when importing CI database to GitLab If you were migrating CI database from MySQL to PostgreSQL manually you can see errors during import about missing sequences: ```sql ALTER SEQUENCE ERROR: relation "ci_builds_id_seq" does not exist ERROR: relation "ci_commits_id_seq" does not exist ERROR: relation "ci_events_id_seq" does not exist ERROR: relation "ci_jobs_id_seq" does not exist ERROR: relation "ci_projects_id_seq" does not exist ERROR: relation "ci_runner_projects_id_seq" does not exist ERROR: relation "ci_runners_id_seq" does not exist ERROR: relation "ci_services_id_seq" does not exist ERROR: relation "ci_taggings_id_seq" does not exist ERROR: relation "ci_tags_id_seq" does not exist CREATE TABLE ``` To fix that you need to apply this SQL statement before doing final backup: Omnibus GitLab installations: ```sql gitlab-ci-rails dbconsole <