--- stage: Configure group: Configure info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments --- # GitLab managed Terraform State **(FREE)** > [Introduced](https://gitlab.com/groups/gitlab-org/-/epics/2673) in GitLab 13.0. [Terraform remote backends](https://www.terraform.io/docs/language/settings/backends/index.html) enable you to store the state file in a remote, shared store. GitLab uses the [Terraform HTTP backend](https://www.terraform.io/docs/language/settings/backends/http.html) to securely store the state files in local storage (the default) or [the remote store of your choice](../../administration/terraform_state.md). The GitLab managed Terraform state backend can store your Terraform state easily and securely, and spares you from setting up additional remote resources like Amazon S3 or Google Cloud Storage. Its features include: - Versioning of Terraform state files. - Supporting encryption of the state file both in transit and at rest. - Locking and unlocking state. - Remote Terraform plan and apply execution. A GitLab **administrator** must [setup the Terraform state storage configuration](../../administration/terraform_state.md) before using this feature. ## Permissions for using Terraform In GitLab version 13.1, the [Maintainer role](../permissions.md) was required to use a GitLab managed Terraform state backend. In GitLab versions 13.2 and greater, the [Maintainer role](../permissions.md) is required to lock, unlock, and write to the state (using `terraform apply`), while the [Developer role](../permissions.md) is required to read the state (using `terraform plan -lock=false`). ## Set up GitLab-managed Terraform state To get started with a GitLab-managed Terraform state, there are two different options: - [Use a local machine](#get-started-using-local-development). - [Use GitLab CI](#get-started-using-gitlab-ci). Terraform States can be found by navigating to a Project's **{cloud-gear}** **Infrastructure > Terraform** page. ### Get started using local development If you plan to only run `terraform plan` and `terraform apply` commands from your local machine, this is a simple way to get started: 1. Create your project on your GitLab instance. 1. Navigate to **Settings > General** and note your **Project name** and **Project ID**. 1. Define the Terraform backend in your Terraform project to be: ```hcl terraform { backend "http" { } } ``` 1. Create a [Personal Access Token](../profile/personal_access_tokens.md) with the `api` scope. 1. On your local machine, run `terraform init`, passing in the following options, replacing ``, ``, `` and `` with the relevant values. This command initializes your Terraform state, and stores that state in your GitLab project. The name of your state can contain only uppercase and lowercase letters, decimal digits, hyphens, and underscores. This example uses `gitlab.com`: ```shell terraform init \ -backend-config="address=https://gitlab.com/api/v4/projects//terraform/state/" \ -backend-config="lock_address=https://gitlab.com/api/v4/projects//terraform/state//lock" \ -backend-config="unlock_address=https://gitlab.com/api/v4/projects//terraform/state//lock" \ -backend-config="username=" \ -backend-config="password=" \ -backend-config="lock_method=POST" \ -backend-config="unlock_method=DELETE" \ -backend-config="retry_wait_min=5" ``` You can now run `terraform plan` and `terraform apply` as you normally would. ### Get started using GitLab CI If you don't want to start with local development, you can also use GitLab CI to run your `terraform plan` and `terraform apply` commands. Next, [configure the backend](#configure-the-backend). #### Configure the backend After executing the `terraform init` command, you must configure the Terraform backend and the CI YAML file: 1. In your Terraform project, define the [HTTP backend](https://www.terraform.io/docs/language/settings/backends/http.html) by adding the following code block in a `.tf` file (such as `backend.tf`) to define the remote backend: ```hcl terraform { backend "http" { } } ``` 1. In the root directory of your project repository, configure a `.gitlab-ci.yml` file. This example uses a pre-built image which includes a `gitlab-terraform` helper. For supported Terraform versions, see the [GitLab Terraform Images project](https://gitlab.com/gitlab-org/terraform-images). ```yaml image: registry.gitlab.com/gitlab-org/terraform-images/stable:latest ``` 1. In the `.gitlab-ci.yml` file, define some CI/CD variables to ease development. In this example, `TF_ROOT` is the directory where the Terraform commands must be executed, `TF_ADDRESS` is the URL to the state on the GitLab instance where this pipeline runs, and the final path segment in `TF_ADDRESS` is the name of the Terraform state. Projects may have multiple states, and this name is arbitrary, so in this example we set it to `example-production` which corresponds with the directory we're using as our `TF_ROOT`, and we ensure that the `.terraform` directory is cached between jobs in the pipeline using a cache key based on the state name (`example-production`): ```yaml variables: TF_ROOT: ${CI_PROJECT_DIR}/environments/example/production TF_ADDRESS: ${CI_API_V4_URL}/projects/${CI_PROJECT_ID}/terraform/state/example-production cache: key: example-production paths: - ${TF_ROOT}/.terraform ``` 1. In a `before_script`, change to your `TF_ROOT`: ```yaml before_script: - cd ${TF_ROOT} stages: - prepare - validate - build - deploy init: stage: prepare script: - gitlab-terraform init validate: stage: validate script: - gitlab-terraform validate plan: stage: build script: - gitlab-terraform plan - gitlab-terraform plan-json artifacts: name: plan paths: - ${TF_ROOT}/plan.cache reports: terraform: ${TF_ROOT}/plan.json apply: stage: deploy environment: name: production script: - gitlab-terraform apply dependencies: - plan when: manual only: - master ``` 1. Push your project to GitLab, which triggers a CI job pipeline. This pipeline runs the `gitlab-terraform init`, `gitlab-terraform validate`, and `gitlab-terraform plan` commands. The output from the above `terraform` commands should be viewable in the job logs. WARNING: Like any other job artifact, Terraform plan data is [viewable by anyone with Guest access](../permissions.md) to the repository. Neither Terraform nor GitLab encrypts the plan file by default. If your Terraform plan includes sensitive data such as passwords, access tokens, or certificates, GitLab strongly recommends encrypting plan output or modifying the project visibility settings. ### Example project See [this reference project](https://gitlab.com/gitlab-org/configure/examples/gitlab-terraform-aws) using GitLab and Terraform to deploy a basic AWS EC2 in a custom VPC. ## Using a GitLab managed Terraform state backend as a remote data source You can use a GitLab-managed Terraform state as a [Terraform data source](https://www.terraform.io/docs/language/state/remote-state-data.html). To use your existing Terraform state backend as a data source, provide the following details as [Terraform input variables](https://www.terraform.io/docs/language/values/variables.html): - **address**: The URL of the remote state backend you want to use as a data source. For example, `https://gitlab.com/api/v4/projects//terraform/state/`. - **username**: The username to authenticate with the data source. If you are using a [Personal Access Token](../profile/personal_access_tokens.md) for authentication, this is your GitLab username. If you are using GitLab CI, this is `'gitlab-ci-token'`. - **password**: The password to authenticate with the data source. If you are using a Personal Access Token for authentication, this is the token value. If you are using GitLab CI, it is the contents of the `${CI_JOB_TOKEN}` CI/CD variable. An example setup is shown below: 1. Create a file named `example.auto.tfvars` with the following contents: ```plaintext example_remote_state_address=https://gitlab.com/api/v4/projects//terraform/state/ example_username= example_access_token= ``` 1. Define the data source by adding the following code block in a `.tf` file (such as `data.tf`): ```hcl data "terraform_remote_state" "example" { backend = "http" config = { address = var.example_remote_state_address username = var.example_username password = var.example_access_token } } ``` Outputs from the data source can now be referenced in your Terraform resources using `data.terraform_remote_state.example.outputs.`. You need at least [developer access](../permissions.md) to the target project to read the Terraform state. ## Migrating to GitLab Managed Terraform state Terraform supports copying the state when the backend is changed or reconfigured. This can be useful if you need to migrate from another backend to GitLab managed Terraform state. Using a local terminal is recommended to run the commands needed for migrating to GitLab Managed Terraform state. The following example demonstrates how to change the state name, the same workflow is needed to migrate to GitLab Managed Terraform state from a different state storage backend. ### Setting up the initial backend ```shell PROJECT_ID="" TF_USERNAME="" TF_PASSWORD="" TF_ADDRESS="https://gitlab.com/api/v4/projects/${PROJECT_ID}/terraform/state/old-state-name" terraform init \ -backend-config=address=${TF_ADDRESS} \ -backend-config=lock_address=${TF_ADDRESS}/lock \ -backend-config=unlock_address=${TF_ADDRESS}/lock \ -backend-config=username=${TF_USERNAME} \ -backend-config=password=${TF_PASSWORD} \ -backend-config=lock_method=POST \ -backend-config=unlock_method=DELETE \ -backend-config=retry_wait_min=5 ``` ```plaintext Initializing the backend... Successfully configured the backend "http"! Terraform will automatically use this backend unless the backend configuration changes. Initializing provider plugins... Terraform has been successfully initialized! You may now begin working with Terraform. Try running "terraform plan" to see any changes that are required for your infrastructure. All Terraform commands should now work. If you ever set or change modules or backend configuration for Terraform, rerun this command to reinitialize your working directory. If you forget, other commands will detect it and remind you to do so if necessary. ``` ### Changing the backend Now that `terraform init` has created a `.terraform/` directory that knows where the old state is, you can tell it about the new location: ```shell TF_ADDRESS="https://gitlab.com/api/v4/projects/${PROJECT_ID}/terraform/state/new-state-name" terraform init \ -backend-config=address=${TF_ADDRESS} \ -backend-config=lock_address=${TF_ADDRESS}/lock \ -backend-config=unlock_address=${TF_ADDRESS}/lock \ -backend-config=username=${TF_USERNAME} \ -backend-config=password=${TF_PASSWORD} \ -backend-config=lock_method=POST \ -backend-config=unlock_method=DELETE \ -backend-config=retry_wait_min=5 ``` ```plaintext Initializing the backend... Backend configuration changed! Terraform has detected that the configuration specified for the backend has changed. Terraform will now check for existing state in the backends. Acquiring state lock. This may take a few moments... Do you want to copy existing state to the new backend? Pre-existing state was found while migrating the previous "http" backend to the newly configured "http" backend. No existing state was found in the newly configured "http" backend. Do you want to copy this state to the new "http" backend? Enter "yes" to copy and "no" to start with an empty state. Enter a value: yes Successfully configured the backend "http"! Terraform will automatically use this backend unless the backend configuration changes. Initializing provider plugins... Terraform has been successfully initialized! You may now begin working with Terraform. Try running "terraform plan" to see any changes that are required for your infrastructure. All Terraform commands should now work. If you ever set or change modules or backend configuration for Terraform, rerun this command to reinitialize your working directory. If you forget, other commands will detect it and remind you to do so if necessary. ``` If you type `yes`, it copies your state from the old location to the new location. You can then go back to running it in GitLab CI/CD. ## Managing state files > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/273592) in GitLab 13.8. Users with Developer and greater [permissions](../permissions.md) can view the state files attached to a project at **Infrastructure > Terraform**. Users with the Maintainer role can perform commands on the state files. The user interface contains these fields: ![Terraform state list](img/terraform_list_view_v13_8.png) - **Name**: The name of the environment, with a locked (**{lock}**) icon if the state file is locked. - **Pipeline**: A link to the most recent pipeline and its status. - **Details**: Information about when the state file was created or changed. - **Actions**: Actions you can take on the state file, including downloading, locking, unlocking, or [removing](#remove-a-state-file) the state file and versions: ![Terraform state list](img/terraform_list_view_actions_v13_8.png) NOTE: Additional improvements to the [graphical interface for managing state files](https://gitlab.com/groups/gitlab-org/-/epics/4563) are planned. ## Remove a state file Users with Maintainer and greater [permissions](../permissions.md) can use the following options to remove a state file: - **GitLab UI**: Go to **Infrastructure > Terraform**. In the **Actions** column, click the vertical ellipsis (**{ellipsis_v}**) button and select **Remove state file and versions**. - **GitLab REST API**: You can remove a state file by making a request to the REST API. For example: ```shell curl --header "Private-Token: " --request DELETE "https://gitlab.example.com/api/v4/projects//terraform/state/" ``` - [GitLab GraphQL API](#remove-a-state-file-with-the-gitlab-graphql-api). ### Remove a state file with the GitLab GraphQL API You can remove a state file by making a GraphQL API request. For example: ```shell mutation deleteState { terraformStateDelete(input: { id: "" }) { errors } } ``` You can obtain the `` by querying the list of states: ```shell query ProjectTerraformStates { project(fullPath: "") { terraformStates { nodes { id name } } } } ``` For those new to the GitLab GraphQL API, read [Getting started with GitLab GraphQL API](../../api/graphql/getting_started.md).