path: root/doc/administration/gitaly/index.md

---
stage: Create
group: Gitaly
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
type: reference
---

# Gitaly and Gitaly Cluster **(FREE SELF)**

[Gitaly](https://gitlab.com/gitlab-org/gitaly) provides high-level RPC access to Git repositories.
It is used by GitLab to read and write Git data.

Gitaly implements a client-server architecture:

- A Gitaly server is any node that runs Gitaly itself.
- A Gitaly client is any node that runs a process that makes requests of the Gitaly server. These
  include, but are not limited to:
  - [GitLab Rails application](https://gitlab.com/gitlab-org/gitlab).
  - [GitLab Shell](https://gitlab.com/gitlab-org/gitlab-shell).
  - [GitLab Workhorse](https://gitlab.com/gitlab-org/gitlab-workhorse).

Gitaly manages only Git repository access for GitLab. Other types of GitLab data aren't accessed
using Gitaly.

GitLab accesses [repositories](../../user/project/repository/index.md) through the configured
[repository storages](../repository_storage_paths.md). Each new repository is stored on one of the
repository storages based on their
[configured weights](../repository_storage_paths.md#configure-where-new-repositories-are-stored). Each
repository storage is either:

- A Gitaly storage with direct access to repositories using [storage paths](../repository_storage_paths.md),
  where each repository is stored on a single Gitaly node. All requests are routed to this node.
- A virtual storage provided by [Gitaly Cluster](#gitaly-cluster), where each repository can be
  stored on multiple Gitaly nodes for fault tolerance. In a Gitaly Cluster:
  - Read requests are distributed between multiple Gitaly nodes, which can improve performance.
  - Write requests are broadcast to repository replicas.

WARNING:
Engineering support for NFS for Git repositories is deprecated. Read the
[deprecation notice](#nfs-deprecation-notice).

## Virtual storage

Virtual storage makes it viable to have a single repository storage in GitLab to simplify repository
management.

Virtual storage with Gitaly Cluster can usually replace direct Gitaly storage configurations.
However, this is at the expense of additional storage space needed to store each repository on multiple
Gitaly nodes. The benefit of using Gitaly Cluster virtual storage over direct Gitaly storage is:

- Improved fault tolerance, because each Gitaly node has a copy of every repository.
- Improved resource utilization, reducing the need for over-provisioning for shard-specific peak
  loads, because read loads are distributed across Gitaly nodes.
- Manual rebalancing for performance is not required, because read loads are distributed across
  Gitaly nodes.
- Simpler management, because all Gitaly nodes are identical.

The number of repository replicas can be configured using a
[replication factor](praefect.md#replication-factor).

It can
be uneconomical to have the same replication factor for all repositories.
[Variable replication factor](https://gitlab.com/groups/gitlab-org/-/epics/3372) is planned to
provide greater flexibility for extremely large GitLab instances.

As with normal Gitaly storages, virtual storages can be sharded.

## Gitaly

The following shows GitLab set up to use direct access to Gitaly:

![Shard example](img/shard_example_v13_3.png)

In this example:

- Each repository is stored on one of three Gitaly storages: `storage-1`, `storage-2`, or
  `storage-3`.
- Each storage is serviced by a Gitaly node.
- The three Gitaly nodes store data on their file systems.

### Gitaly architecture

The following illustrates the Gitaly client-server architecture:

```mermaid
flowchart TD
  subgraph Gitaly clients
    A[GitLab Rails]
    B[GitLab Workhorse]
    C[GitLab Shell]
    D[...]
  end

  subgraph Gitaly
    E[Git integration]
  end

F[Local filesystem]

A -- gRPC --> Gitaly
B -- gRPC--> Gitaly
C -- gRPC --> Gitaly
D -- gRPC --> Gitaly

E --> F
```

### Configure Gitaly

Gitaly comes pre-configured with Omnibus GitLab, which is a configuration
[suitable for up to 1000 users](../reference_architectures/1k_users.md). For:

- Omnibus GitLab installations for up to 2000 users, see [specific Gitaly configuration instructions](../reference_architectures/2k_users.md#configure-gitaly).
- Source installations or custom Gitaly installations, see [Configure Gitaly](configure_gitaly.md).

GitLab installations for more than 2000 users should use Gitaly Cluster.

NOTE:
If not set in GitLab, feature flags are read as false from the console and Gitaly uses their
default value. The default value depends on the GitLab version.

## Gitaly Cluster

Git storage is provided through the Gitaly service in GitLab, and is essential to the operation of
GitLab. When the number of users, repositories, and activity grows, it is important to scale Gitaly
appropriately by:

- Increasing the available CPU and memory resources available to Git before
  resource exhaustion degrades Git, Gitaly, and GitLab application performance.
- Increasing available storage before storage limits are reached causing write
  operations to fail.
- Removing single points of failure to improve fault tolerance. Git should be
  considered mission critical if a service degradation would prevent you from
  deploying changes to production.

Gitaly can be run in a clustered configuration to:

- Scale the Gitaly service.
- Increase fault tolerance.

In this configuration, every Git repository can be stored on multiple Gitaly nodes in the cluster.

Using a Gitaly Cluster increases fault tolerance by:

- Replicating write operations to warm standby Gitaly nodes.
- Detecting Gitaly node failures.
- Automatically routing Git requests to an available Gitaly node.

NOTE:
Technical support for Gitaly clusters is limited to GitLab Premium and Ultimate
customers.

The following shows GitLab set up to access `storage-1`, a virtual storage provided by Gitaly
Cluster:

![Cluster example](img/cluster_example_v13_3.png)

In this example:

- Repositories are stored on a virtual storage called `storage-1`.
- Three Gitaly nodes provide `storage-1` access: `gitaly-1`, `gitaly-2`, and `gitaly-3`.
- The three Gitaly nodes share data in three separate hashed storage locations.
- The [replication factor](praefect.md#replication-factor) is `3`. There are three copies maintained
  of each repository.

The availability objectives for Gitaly clusters are:

- **Recovery Point Objective (RPO):** Less than 1 minute.

  Writes are replicated asynchronously. Any writes that have not been replicated
  to the newly promoted primary are lost.

  [Strong consistency](praefect.md#strong-consistency) can be used to avoid loss in some
  circumstances.

- **Recovery Time Objective (RTO):** Less than 10 seconds.
  Outages are detected by a health check run by each Praefect node every
  second. Failover requires ten consecutive failed health checks on each
  Praefect node.

  [Faster outage detection](https://gitlab.com/gitlab-org/gitaly/-/issues/2608)
  is planned to improve this to less than 1 second.

Gitaly Cluster supports:

- [Strong consistency](praefect.md#strong-consistency) of the secondary replicas.
- [Automatic failover](praefect.md#automatic-failover-and-primary-election-strategies) from the primary to the secondary.
- Reporting of possible data loss if replication queue is non-empty.
- From GitLab 13.0 to GitLab 14.0, marking repositories as [read-only](praefect.md#read-only-mode)
  if data loss is detected to prevent data inconsistencies.

Follow the [Gitaly Cluster epic](https://gitlab.com/groups/gitlab-org/-/epics/1489)
for improvements including
[horizontally distributing reads](https://gitlab.com/groups/gitlab-org/-/epics/2013).

### Moving beyond NFS

WARNING:
Engineering support for NFS for Git repositories is deprecated. Technical support is planned to be
unavailable from GitLab 15.0. No further enhancements are planned for this feature.

[Network File System (NFS)](https://en.wikipedia.org/wiki/Network_File_System)
is not well suited to Git workloads which are CPU and IOPS sensitive.
Specifically:

- Git is sensitive to file system latency. Even simple operations require many
  read operations. Operations that are fast on block storage can become an order of
  magnitude slower. This significantly impacts GitLab application performance.
- NFS performance optimizations that prevent the performance gap between
  block storage and NFS being even wider are vulnerable to race conditions. We have observed
  [data inconsistencies](https://gitlab.com/gitlab-org/gitaly/-/issues/2589)
  in production environments caused by simultaneous writes to different NFS
  clients. Data corruption is not an acceptable risk.

Gitaly Cluster is purpose built to provide reliable, high performance, fault
tolerant Git storage.

Further reading:

- Blog post: [The road to Gitaly v1.0 (aka, why GitLab doesn't require NFS for storing Git data anymore)](https://about.gitlab.com/blog/2018/09/12/the-road-to-gitaly-1-0/)
- Blog post: [How we spent two weeks hunting an NFS bug in the Linux kernel](https://about.gitlab.com/blog/2018/11/14/how-we-spent-two-weeks-hunting-an-nfs-bug/)

### Components of Gitaly Cluster

Gitaly Cluster consists of multiple components:

- [Load balancer](praefect.md#load-balancer) for distributing requests and providing fault-tolerant access to
  Praefect nodes.
- [Praefect](praefect.md#praefect) nodes for managing the cluster and routing requests to Gitaly nodes.
- [PostgreSQL database](praefect.md#postgresql) for persisting cluster metadata and [PgBouncer](praefect.md#use-pgbouncer),
  recommended for pooling Praefect's database connections.
- Gitaly nodes to provide repository storage and Git access.

### Architecture

Praefect is a router and transaction manager for Gitaly, and a required
component for running a Gitaly Cluster.

![Architecture diagram](img/praefect_architecture_v12_10.png)

For more information, see [Gitaly High Availability (HA) Design](https://gitlab.com/gitlab-org/gitaly/-/blob/master/doc/design_ha.md).

### Configure Gitaly Cluster

For more information on configuring Gitaly Cluster, see [Configure Gitaly Cluster](praefect.md).

## Do not bypass Gitaly

GitLab doesn't advise directly accessing Gitaly repositories stored on disk with a Git client,
because Gitaly is being continuously improved and changed. These improvements may invalidate
your assumptions, resulting in performance degradation, instability, and even data loss. For example:

- Gitaly has optimizations such as the [`info/refs` advertisement cache](https://gitlab.com/gitlab-org/gitaly/blob/master/doc/design_diskcache.md),
  that rely on Gitaly controlling and monitoring access to repositories by using the official gRPC
  interface.
- [Gitaly Cluster](praefect.md) has optimizations, such as fault tolerance and
  [distributed reads](praefect.md#distributed-reads), that depend on the gRPC interface and database
  to determine repository state.

WARNING:
Accessing Git repositories directly is done at your own risk and is not supported.

## Direct access to Git in GitLab

Direct access to Git uses code in GitLab known as the "Rugged patches".

Before Gitaly existed, what are now Gitaly clients accessed Git repositories directly, either:

- On a local disk in the case of a single-machine Omnibus GitLab installation.
- Using NFS in the case of a horizontally-scaled GitLab installation.

In addition to running plain `git` commands, GitLab used a Ruby library called
[Rugged](https://github.com/libgit2/rugged). Rugged is a wrapper around
[libgit2](https://libgit2.org/), a stand-alone implementation of Git in the form of a C library.

Over time it became clear that Rugged, particularly in combination with
[Unicorn](https://yhbt.net/unicorn/), is extremely efficient. Because `libgit2` is a library and
not an external process, there was very little overhead between:

- GitLab application code that tried to look up data in Git repositories.
- The Git implementation itself.

Because the combination of Rugged and Unicorn was so efficient, the GitLab application code ended up
with lots of duplicate Git object lookups. For example, looking up the default branch commit a dozen
times in one request. We could write inefficient code without poor performance.

When we migrated these Git lookups to Gitaly calls, we suddenly had a much higher fixed cost per Git
lookup. Even when Gitaly is able to re-use an already-running `git` process (for example, to look up
a commit), you still have:

- The cost of a network roundtrip to Gitaly.
- Inside Gitaly, a write/read roundtrip on the Unix pipes that connect Gitaly to the `git` process.

Using GitLab.com to measure, we reduced the number of Gitaly calls per request until the loss of
Rugged's efficiency was no longer felt. It also helped that we run Gitaly itself directly on the Git
file servers, rather than by using NFS mounts. This gave us a speed boost that counteracted the
negative effect of not using Rugged anymore.

Unfortunately, other deployments of GitLab could not remove NFS like we did on GitLab.com, and they
got the worst of both worlds:

- The slowness of NFS.
- The increased inherent overhead of Gitaly.

The code removed from GitLab during the Gitaly migration project affected these deployments. As a
performance workaround for these NFS-based deployments, we re-introduced some of the old Rugged
code. This re-introduced code is informally referred to as the "Rugged patches".

### How it works

The Ruby methods that perform direct Git access are behind
[feature flags](../../development/gitaly.md#legacy-rugged-code), disabled by default. It wasn't
convenient to set feature flags to get the best performance, so we added an automatic mechanism that
enables direct Git access.

When GitLab calls a function that has a "Rugged patch", it performs two checks:

- Is the feature flag for this patch set in the database? If so, the feature flag setting controls
  the GitLab use of "Rugged patch" code.
- If the feature flag is not set, GitLab tries accessing the file system underneath the
  Gitaly server directly. If it can, it uses the "Rugged patch":
  - If using Puma and [thread count](../../install/requirements.md#puma-threads) is set
    to `1`.

The result of these checks is cached.

To see if GitLab can access the repository file system directly, we use the following heuristic:

- Gitaly ensures that the file system has a metadata file in its root with a UUID in it.
- Gitaly reports this UUID to GitLab by using the `ServerInfo` RPC.
- GitLab Rails tries to read the metadata file directly. If it exists, and if the UUID's match,
  assume we have direct access.

Direct Git access is enable by default in Omnibus GitLab because it fills in the correct repository
paths in the GitLab configuration file `config/gitlab.yml`. This satisfies the UUID check.

WARNING:
If directly copying repository data from a GitLab server to Gitaly, ensure that the metadata file,
default path `/var/opt/gitlab/git-data/repositories/.gitaly-metadata`, is not included in the transfer.
Copying this file causes GitLab to use the Rugged patches for repositories hosted on the Gitaly server,
leading to `Error creating pipeline` and `Commit not found` errors, or stale data.

### Transition to Gitaly Cluster

For the sake of removing complexity, we must remove direct Git access in GitLab. However, we can't
remove it as long some GitLab installations require Git repositories on NFS.

There are two facets to our efforts to remove direct Git access in GitLab:

- Reduce the number of inefficient Gitaly queries made by GitLab.
- Persuade administrators of fault-tolerant or horizontally-scaled GitLab instances to migrate off
  NFS.

The second facet presents the only real solution. For this, we developed
[Gitaly Cluster](#gitaly-cluster).

## NFS deprecation notice

Engineering support for NFS for Git repositories is deprecated. Technical support is planned to be
unavailable from GitLab 15.0. No further enhancements are planned for this feature.

Additional information:

- [Recommended NFS mount options and known issues with Gitaly and NFS](../nfs.md#upgrade-to-gitaly-cluster-or-disable-caching-if-experiencing-data-loss).
- [GitLab statement of support](https://about.gitlab.com/support/statement-of-support.html#gitaly-and-nfs).

GitLab recommends:

- Creating a [Gitaly Cluster](#gitaly-cluster) as soon as possible.
- [Moving your repositories](praefect.md#migrate-to-gitaly-cluster) from NFS-based storage to Gitaly
  Cluster.

We welcome your feedback on this process. You can:

- Raise a support ticket.
- [Comment on the epic](https://gitlab.com/groups/gitlab-org/-/epics/4916).