diff options
Diffstat (limited to 'vendor/github.com/prometheus/procfs/ttar')
| -rwxr-xr-x | vendor/github.com/prometheus/procfs/ttar | 389 |
1 files changed, 389 insertions, 0 deletions
diff --git a/vendor/github.com/prometheus/procfs/ttar b/vendor/github.com/prometheus/procfs/ttar new file mode 100755 index 00000000..b0171a12 --- /dev/null +++ b/vendor/github.com/prometheus/procfs/ttar @@ -0,0 +1,389 @@ +#!/usr/bin/env bash + +# Purpose: plain text tar format +# Limitations: - only suitable for text files, directories, and symlinks +# - stores only filename, content, and mode +# - not designed for untrusted input +# +# Note: must work with bash version 3.2 (macOS) + +# Copyright 2017 Roger Luethi +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +set -o errexit -o nounset + +# Sanitize environment (for instance, standard sorting of glob matches) +export LC_ALL=C + +path="" +CMD="" +ARG_STRING="$*" + +#------------------------------------------------------------------------------ +# Not all sed implementations can work on null bytes. In order to make ttar +# work out of the box on macOS, use Python as a stream editor. + +USE_PYTHON=0 + +PYTHON_CREATE_FILTER=$(cat << 'PCF' +#!/usr/bin/env python + +import re +import sys + +for line in sys.stdin: + line = re.sub(r'EOF', r'\EOF', line) + line = re.sub(r'NULLBYTE', r'\NULLBYTE', line) + line = re.sub('\x00', r'NULLBYTE', line) + sys.stdout.write(line) +PCF +) + +PYTHON_EXTRACT_FILTER=$(cat << 'PEF' +#!/usr/bin/env python + +import re +import sys + +for line in sys.stdin: + line = re.sub(r'(?<!\\)NULLBYTE', '\x00', line) + line = re.sub(r'\\NULLBYTE', 'NULLBYTE', line) + line = re.sub(r'([^\\])EOF', r'\1', line) + line = re.sub(r'\\EOF', 'EOF', line) + sys.stdout.write(line) +PEF +) + +function test_environment { + if [[ "$(echo "a" | sed 's/a/\x0/' | wc -c)" -ne 2 ]]; then + echo "WARNING sed unable to handle null bytes, using Python (slow)." + if ! which python >/dev/null; then + echo "ERROR Python not found. Aborting." + exit 2 + fi + USE_PYTHON=1 + fi +} + +#------------------------------------------------------------------------------ + +function usage { + bname=$(basename "$0") + cat << USAGE +Usage: $bname [-C <DIR>] -c -f <ARCHIVE> <FILE...> (create archive) + $bname -t -f <ARCHIVE> (list archive contents) + $bname [-C <DIR>] -x -f <ARCHIVE> (extract archive) + +Options: + -C <DIR> (change directory) + -v (verbose) + +Example: Change to sysfs directory, create ttar file from fixtures directory + $bname -C sysfs -c -f sysfs/fixtures.ttar fixtures/ +USAGE +exit "$1" +} + +function vecho { + if [ "${VERBOSE:-}" == "yes" ]; then + echo >&7 "$@" + fi +} + +function set_cmd { + if [ -n "$CMD" ]; then + echo "ERROR: more than one command given" + echo + usage 2 + fi + CMD=$1 +} + +unset VERBOSE + +while getopts :cf:htxvC: opt; do + case $opt in + c) + set_cmd "create" + ;; + f) + ARCHIVE=$OPTARG + ;; + h) + usage 0 + ;; + t) + set_cmd "list" + ;; + x) + set_cmd "extract" + ;; + v) + VERBOSE=yes + exec 7>&1 + ;; + C) + CDIR=$OPTARG + ;; + *) + echo >&2 "ERROR: invalid option -$OPTARG" + echo + usage 1 + ;; + esac +done + +# Remove processed options from arguments +shift $(( OPTIND - 1 )); + +if [ "${CMD:-}" == "" ]; then + echo >&2 "ERROR: no command given" + echo + usage 1 +elif [ "${ARCHIVE:-}" == "" ]; then + echo >&2 "ERROR: no archive name given" + echo + usage 1 +fi + +function list { + local path="" + local size=0 + local line_no=0 + local ttar_file=$1 + if [ -n "${2:-}" ]; then + echo >&2 "ERROR: too many arguments." + echo + usage 1 + fi + if [ ! -e "$ttar_file" ]; then + echo >&2 "ERROR: file not found ($ttar_file)" + echo + usage 1 + fi + while read -r line; do + line_no=$(( line_no + 1 )) + if [ $size -gt 0 ]; then + size=$(( size - 1 )) + continue + fi + if [[ $line =~ ^Path:\ (.*)$ ]]; then + path=${BASH_REMATCH[1]} + elif [[ $line =~ ^Lines:\ (.*)$ ]]; then + size=${BASH_REMATCH[1]} + echo "$path" + elif [[ $line =~ ^Directory:\ (.*)$ ]]; then + path=${BASH_REMATCH[1]} + echo "$path/" + elif [[ $line =~ ^SymlinkTo:\ (.*)$ ]]; then + echo "$path -> ${BASH_REMATCH[1]}" + fi + done < "$ttar_file" +} + +function extract { + local path="" + local size=0 + local line_no=0 + local ttar_file=$1 + if [ -n "${2:-}" ]; then + echo >&2 "ERROR: too many arguments." + echo + usage 1 + fi + if [ ! -e "$ttar_file" ]; then + echo >&2 "ERROR: file not found ($ttar_file)" + echo + usage 1 + fi + while IFS= read -r line; do + line_no=$(( line_no + 1 )) + local eof_without_newline + if [ "$size" -gt 0 ]; then + if [[ "$line" =~ [^\\]EOF ]]; then + # An EOF not preceeded by a backslash indicates that the line + # does not end with a newline + eof_without_newline=1 + else + eof_without_newline=0 + fi + # Replace NULLBYTE with null byte if at beginning of line + # Replace NULLBYTE with null byte unless preceeded by backslash + # Remove one backslash in front of NULLBYTE (if any) + # Remove EOF unless preceeded by backslash + # Remove one backslash in front of EOF + if [ $USE_PYTHON -eq 1 ]; then + echo -n "$line" | python -c "$PYTHON_EXTRACT_FILTER" >> "$path" + else + # The repeated pattern makes up for sed's lack of negative + # lookbehind assertions (for consecutive null bytes). + echo -n "$line" | \ + sed -e 's/^NULLBYTE/\x0/g; + s/\([^\\]\)NULLBYTE/\1\x0/g; + s/\([^\\]\)NULLBYTE/\1\x0/g; + s/\\NULLBYTE/NULLBYTE/g; + s/\([^\\]\)EOF/\1/g; + s/\\EOF/EOF/g; + ' >> "$path" + fi + if [[ "$eof_without_newline" -eq 0 ]]; then + echo >> "$path" + fi + size=$(( size - 1 )) + continue + fi + if [[ $line =~ ^Path:\ (.*)$ ]]; then + path=${BASH_REMATCH[1]} + if [ -e "$path" ] || [ -L "$path" ]; then + rm "$path" + fi + elif [[ $line =~ ^Lines:\ (.*)$ ]]; then + size=${BASH_REMATCH[1]} + # Create file even if it is zero-length. + touch "$path" + vecho " $path" + elif [[ $line =~ ^Mode:\ (.*)$ ]]; then + mode=${BASH_REMATCH[1]} + chmod "$mode" "$path" + vecho "$mode" + elif [[ $line =~ ^Directory:\ (.*)$ ]]; then + path=${BASH_REMATCH[1]} + mkdir -p "$path" + vecho " $path/" + elif [[ $line =~ ^SymlinkTo:\ (.*)$ ]]; then + ln -s "${BASH_REMATCH[1]}" "$path" + vecho " $path -> ${BASH_REMATCH[1]}" + elif [[ $line =~ ^# ]]; then + # Ignore comments between files + continue + else + echo >&2 "ERROR: Unknown keyword on line $line_no: $line" + exit 1 + fi + done < "$ttar_file" +} + +function div { + echo "# ttar - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -" \ + "- - - - - -" +} + +function get_mode { + local mfile=$1 + if [ -z "${STAT_OPTION:-}" ]; then + if stat -c '%a' "$mfile" >/dev/null 2>&1; then + # GNU stat + STAT_OPTION='-c' + STAT_FORMAT='%a' + else + # BSD stat + STAT_OPTION='-f' + # Octal output, user/group/other (omit file type, sticky bit) + STAT_FORMAT='%OLp' + fi + fi + stat "${STAT_OPTION}" "${STAT_FORMAT}" "$mfile" +} + +function _create { + shopt -s nullglob + local mode + local eof_without_newline + while (( "$#" )); do + file=$1 + if [ -L "$file" ]; then + echo "Path: $file" + symlinkTo=$(readlink "$file") + echo "SymlinkTo: $symlinkTo" + vecho " $file -> $symlinkTo" + div + elif [ -d "$file" ]; then + # Strip trailing slash (if there is one) + file=${file%/} + echo "Directory: $file" + mode=$(get_mode "$file") + echo "Mode: $mode" + vecho "$mode $file/" + div + # Find all files and dirs, including hidden/dot files + for x in "$file/"{*,.[^.]*}; do + _create "$x" + done + elif [ -f "$file" ]; then + echo "Path: $file" + lines=$(wc -l "$file"|awk '{print $1}') + eof_without_newline=0 + if [[ "$(wc -c "$file"|awk '{print $1}')" -gt 0 ]] && \ + [[ "$(tail -c 1 "$file" | wc -l)" -eq 0 ]]; then + eof_without_newline=1 + lines=$((lines+1)) + fi + echo "Lines: $lines" + # Add backslash in front of EOF + # Add backslash in front of NULLBYTE + # Replace null byte with NULLBYTE + if [ $USE_PYTHON -eq 1 ]; then + < "$file" python -c "$PYTHON_CREATE_FILTER" + else + < "$file" \ + sed 's/EOF/\\EOF/g; + s/NULLBYTE/\\NULLBYTE/g; + s/\x0/NULLBYTE/g; + ' + fi + if [[ "$eof_without_newline" -eq 1 ]]; then + # Finish line with EOF to indicate that the original line did + # not end with a linefeed + echo "EOF" + fi + mode=$(get_mode "$file") + echo "Mode: $mode" + vecho "$mode $file" + div + else + echo >&2 "ERROR: file not found ($file in $(pwd))" + exit 2 + fi + shift + done +} + +function create { + ttar_file=$1 + shift + if [ -z "${1:-}" ]; then + echo >&2 "ERROR: missing arguments." + echo + usage 1 + fi + if [ -e "$ttar_file" ]; then + rm "$ttar_file" + fi + exec > "$ttar_file" + echo "# Archive created by ttar $ARG_STRING" + _create "$@" +} + +test_environment + +if [ -n "${CDIR:-}" ]; then + if [[ "$ARCHIVE" != /* ]]; then + # Relative path: preserve the archive's location before changing + # directory + ARCHIVE="$(pwd)/$ARCHIVE" + fi + cd "$CDIR" +fi + +"$CMD" "$ARCHIVE" "$@" |