This commit was manufactured by cvs2svn to create branchcagney_bfdfile-20040213-branchpointcagney_bfdfile-20040213-branch

'cagney_bfdfile-20040213-branch'.

Sprout from cagney_bigcore-20040122-branch 2004-01-19 18:28:59 UTC cvs2svn 'This commit was manufactured by cvs2svn to create branch'
Cherrypick from master 2004-02-11 17:52:06 UTC DJ Delorie <dj@redhat.com> '* configure.in (powerpc-*-aix*): Add target-libada to noconfigdirs.':
    COPYING.NEWLIB
    ChangeLog
    Makefile.def
    Makefile.in
    configure
    configure.in
    include/elf/ChangeLog
    include/elf/common.h
    include/opcode/ChangeLog
    include/opcode/h8300.h

10 files changed, 545 insertions, 101 deletions

diff --git a/COPYING.NEWLIB b/COPYING.NEWLIB
index e0eff0717..60b63dfac 100644
--- a/COPYING.NEWLIB
+++ b/COPYING.NEWLIB
@@ -670,14 +670,68 @@ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 SUCH DAMAGE.
 
-(27) Red Hat Incorporated
+(27) Konstantin Chuguev (--enable-newlib-iconv)
+
+Copyright (c) 1999, 2000
+   Konstantin Chuguev.  All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGE.
+
+   iconv (Charset Conversion Library) v2.0
+
+(27) Artem Bityuckiy (--enable-newlib-iconv)
+
+Copyright (c) 2003, Artem B. Bityuckiy, SoftMine Corporation.
+Rights transferred to Franklin Electronic Publishers.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGE.
+
+(28) Red Hat Incorporated
 
 Unless otherwise stated in each remaining newlib file, the remaining
 files in the newlib subdirectory default to the following copyright.
 It should be noted that Red Hat Incorporated now owns copyrights
 belonging to Cygnus Solutions and Cygnus Support.
 
-Copyright (c) 1994, 1997, 2001, 2002 Red Hat Incorporated.
+Copyright (c) 1994, 1997, 2001, 2002, 2003, 2004 Red Hat Incorporated.
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without 
diff --git a/ChangeLog b/ChangeLog
index 32b0eeb9a..681247b6d 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,42 @@
+2004-02-11  David Edelsohn  <edelsohn@gnu.org>
+
+	* configure.in (powerpc-*-aix*): Add target-libada to noconfigdirs.
+	(rs6000-*-aix*): Same.
+	* configure: Regenerate.
+
+2004-02-11  Kelley Cook  <kcook@gcc.gnu.org>
+
+	* configure.in (host): Add in missing $noconfigdirs to defines.
+	* configure: Regenerate.
+
+2004-02-10  Arnaud Charlet  <charlet@act-europe.fr>,
+	    Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	PR ada/6637, PR ada/5911
+        Merge with libada-branch:
+	* configure.in, Makefile.tpl, Makefile.def: Add target-libada,
+	with appropriate dependencies. Add --enable-libada configure switch.
+	* configure, Makefile.in: Regenerate.
+
+2004-02-05  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
+
+	* configure.in: Don't pass --with-stabs on IRIX 5 either.
+	* configure: Regenerate.
+
+2004-02-02  Jeff Johnston  <jjohnstn@redhat.com>
+
+	* COPYING.NEWLIB: Update Red Hat license to 2004.
+	
+2004-01-23  DJ Delorie  <dj@redhat.com>
+
+	* Makefile.def (target_modules) [libiberty]: Don't stage.
+	* Makefile.in: Rebuilt.
+
+2004-01-23  Jeff Johnston  <jjohnstn@redhat.com>
+	
+	* COPYING.NEWLIB: Update to include copyrights for new
+	iconv code.
+
 2004-01-15  Andrew Cagney  <cagney@redhat.com>
 
 	* src-release: Update copyright year.
diff --git a/Makefile.def b/Makefile.def
index 319711a05..5a6809815 100644
--- a/Makefile.def
+++ b/Makefile.def
@@ -107,7 +107,7 @@ target_modules = { module= libtermcap; no_check=true; stage=true;
                    missing=maintainer-clean; };
 target_modules = { module= winsup; };
 target_modules = { module= libgloss; no_check=true; };
-target_modules = { module= libiberty; stage=true; };
+target_modules = { module= libiberty; };
 target_modules = { module= gperf; };
 target_modules = { module= examples; no_check=true; no_install=true; };
 target_modules = { module= libffi; };
@@ -116,6 +116,7 @@ target_modules = { module= zlib; stage=true; };
 target_modules = { module= boehm-gc; };
 target_modules = { module= qthreads; };
 target_modules = { module= rda; };
+target_modules = { module= libada; };
 
 // These are (some of) the make targets to be done in each subdirectory.
 // Not all; these are the ones which don't have special options.
diff --git a/Makefile.in b/Makefile.in
index 33f87b6aa..061a76fb8 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -611,7 +611,8 @@ configure-target:  \
     maybe-configure-target-zlib \
     maybe-configure-target-boehm-gc \
     maybe-configure-target-qthreads \
-    maybe-configure-target-rda
+    maybe-configure-target-rda \
+    maybe-configure-target-libada
 
 # The target built for a native build.
 .PHONY: all.normal
@@ -700,7 +701,8 @@ all-target:  \
     maybe-all-target-zlib \
     maybe-all-target-boehm-gc \
     maybe-all-target-qthreads \
-    maybe-all-target-rda
+    maybe-all-target-rda \
+    maybe-all-target-libada
 
 # Do a target for all the subdirectories.  A ``make do-X'' will do a
 # ``make X'' in all subdirectories (because, in general, there is a
@@ -794,7 +796,8 @@ info-target:  \
     maybe-info-target-zlib \
     maybe-info-target-boehm-gc \
     maybe-info-target-qthreads \
-    maybe-info-target-rda
+    maybe-info-target-rda \
+    maybe-info-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-info-gcc info-gcc
@@ -2582,6 +2585,28 @@ info-target-rda: \
 	  || exit 1
 
 
+.PHONY: maybe-info-target-libada info-target-libada
+maybe-info-target-libada:
+
+info-target-libada: \
+    configure-target-libada 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing info in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          info) \
+	  || exit 1
+
+
 
 .PHONY: do-dvi
 do-dvi: dvi-host dvi-target
@@ -2670,7 +2695,8 @@ dvi-target:  \
     maybe-dvi-target-zlib \
     maybe-dvi-target-boehm-gc \
     maybe-dvi-target-qthreads \
-    maybe-dvi-target-rda
+    maybe-dvi-target-rda \
+    maybe-dvi-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-dvi-gcc dvi-gcc
@@ -4458,6 +4484,28 @@ dvi-target-rda: \
 	  || exit 1
 
 
+.PHONY: maybe-dvi-target-libada dvi-target-libada
+maybe-dvi-target-libada:
+
+dvi-target-libada: \
+    configure-target-libada 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing dvi in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          dvi) \
+	  || exit 1
+
+
 
 .PHONY: do-TAGS
 do-TAGS: TAGS-host TAGS-target
@@ -4546,7 +4594,8 @@ TAGS-target:  \
     maybe-TAGS-target-zlib \
     maybe-TAGS-target-boehm-gc \
     maybe-TAGS-target-qthreads \
-    maybe-TAGS-target-rda
+    maybe-TAGS-target-rda \
+    maybe-TAGS-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-TAGS-gcc TAGS-gcc
@@ -6334,6 +6383,28 @@ TAGS-target-rda: \
 	  || exit 1
 
 
+.PHONY: maybe-TAGS-target-libada TAGS-target-libada
+maybe-TAGS-target-libada:
+
+TAGS-target-libada: \
+    configure-target-libada 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing TAGS in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          TAGS) \
+	  || exit 1
+
+
 
 .PHONY: do-install-info
 do-install-info: install-info-host install-info-target
@@ -6422,7 +6493,8 @@ install-info-target:  \
     maybe-install-info-target-zlib \
     maybe-install-info-target-boehm-gc \
     maybe-install-info-target-qthreads \
-    maybe-install-info-target-rda
+    maybe-install-info-target-rda \
+    maybe-install-info-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-install-info-gcc install-info-gcc
@@ -8291,6 +8363,29 @@ install-info-target-rda: \
 	  || exit 1
 
 
+.PHONY: maybe-install-info-target-libada install-info-target-libada
+maybe-install-info-target-libada:
+
+install-info-target-libada: \
+    configure-target-libada \
+    info-target-libada 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing install-info in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          install-info) \
+	  || exit 1
+
+
 
 .PHONY: do-installcheck
 do-installcheck: installcheck-host installcheck-target
@@ -8379,7 +8474,8 @@ installcheck-target:  \
     maybe-installcheck-target-zlib \
     maybe-installcheck-target-boehm-gc \
     maybe-installcheck-target-qthreads \
-    maybe-installcheck-target-rda
+    maybe-installcheck-target-rda \
+    maybe-installcheck-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-installcheck-gcc installcheck-gcc
@@ -10167,6 +10263,28 @@ installcheck-target-rda: \
 	  || exit 1
 
 
+.PHONY: maybe-installcheck-target-libada installcheck-target-libada
+maybe-installcheck-target-libada:
+
+installcheck-target-libada: \
+    configure-target-libada 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing installcheck in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          installcheck) \
+	  || exit 1
+
+
 
 .PHONY: do-mostlyclean
 do-mostlyclean: mostlyclean-host mostlyclean-target
@@ -10255,7 +10373,8 @@ mostlyclean-target:  \
     maybe-mostlyclean-target-zlib \
     maybe-mostlyclean-target-boehm-gc \
     maybe-mostlyclean-target-qthreads \
-    maybe-mostlyclean-target-rda
+    maybe-mostlyclean-target-rda \
+    maybe-mostlyclean-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-mostlyclean-gcc mostlyclean-gcc
@@ -11920,6 +12039,27 @@ mostlyclean-target-rda:
 	  || exit 1
 
 
+.PHONY: maybe-mostlyclean-target-libada mostlyclean-target-libada
+maybe-mostlyclean-target-libada:
+
+mostlyclean-target-libada: 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing mostlyclean in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          mostlyclean) \
+	  || exit 1
+
+
 
 .PHONY: do-clean
 do-clean: clean-host clean-target
@@ -12008,7 +12148,8 @@ clean-target:  \
     maybe-clean-target-zlib \
     maybe-clean-target-boehm-gc \
     maybe-clean-target-qthreads \
-    maybe-clean-target-rda
+    maybe-clean-target-rda \
+    maybe-clean-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-clean-gcc clean-gcc
@@ -13687,6 +13828,27 @@ clean-target-rda:
 	  || exit 1
 
 
+.PHONY: maybe-clean-target-libada clean-target-libada
+maybe-clean-target-libada:
+
+clean-target-libada: 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing clean in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          clean) \
+	  || exit 1
+
+
 
 .PHONY: do-distclean
 do-distclean: distclean-host distclean-target
@@ -13775,7 +13937,8 @@ distclean-target:  \
     maybe-distclean-target-zlib \
     maybe-distclean-target-boehm-gc \
     maybe-distclean-target-qthreads \
-    maybe-distclean-target-rda
+    maybe-distclean-target-rda \
+    maybe-distclean-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-distclean-gcc distclean-gcc
@@ -15454,6 +15617,27 @@ distclean-target-rda:
 	  || exit 1
 
 
+.PHONY: maybe-distclean-target-libada distclean-target-libada
+maybe-distclean-target-libada:
+
+distclean-target-libada: 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing distclean in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          distclean) \
+	  || exit 1
+
+
 
 .PHONY: do-maintainer-clean
 do-maintainer-clean: maintainer-clean-host maintainer-clean-target
@@ -15542,7 +15726,8 @@ maintainer-clean-target:  \
     maybe-maintainer-clean-target-zlib \
     maybe-maintainer-clean-target-boehm-gc \
     maybe-maintainer-clean-target-qthreads \
-    maybe-maintainer-clean-target-rda
+    maybe-maintainer-clean-target-rda \
+    maybe-maintainer-clean-target-libada
 
 # GCC, the eternal special case
 .PHONY: maybe-maintainer-clean-gcc maintainer-clean-gcc
@@ -17221,6 +17406,27 @@ maintainer-clean-target-rda:
 	  || exit 1
 
 
+.PHONY: maybe-maintainer-clean-target-libada maintainer-clean-target-libada
+maybe-maintainer-clean-target-libada:
+
+maintainer-clean-target-libada: 
+	@[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libada" ; \
+	for flag in $(EXTRA_TARGET_FLAGS); do \
+	  eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+	done; \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+	          "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+	          "RANLIB=$${RANLIB}" \
+	          "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+	          maintainer-clean) \
+	  || exit 1
+
+
 
 
 # Here are the targets which correspond to the do-X targets.
@@ -17363,7 +17569,8 @@ do-check: maybe-check-gcc  \
     maybe-check-target-zlib \
     maybe-check-target-boehm-gc \
     maybe-check-target-qthreads \
-    maybe-check-target-rda
+    maybe-check-target-rda \
+    maybe-check-target-libada
 
 # Automated reporting of test results.
 
@@ -17542,7 +17749,8 @@ install-target:  \
     maybe-install-target-zlib \
     maybe-install-target-boehm-gc \
     maybe-install-target-qthreads \
-    maybe-install-target-rda
+    maybe-install-target-rda \
+    maybe-install-target-libada
 
 uninstall:
 	@echo "the uninstall target is not supported in this tree"
@@ -22560,30 +22768,8 @@ configure-target-libiberty: $(TARGET_SUBDIR)/libiberty/multilib.out
 	      *) topdir="../../$(srcdir)" ;; \
 	    esac ;; \
 	esac; \
-	if [ "$(srcdir)" = "." ] ; then \
-	  if [ "$(TARGET_SUBDIR)" != "." ] ; then \
-	    if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \
-	      if [ -f Makefile ]; then \
-	        if $(MAKE) distclean; then \
-	          true; \
-	        else \
-	          exit 1; \
-	        fi; \
-	      else \
-	        true; \
-	      fi; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  else \
-	    true; \
-	  fi; \
-	  srcdiroption="--srcdir=."; \
-	  libsrcdir="."; \
-	else \
 	  srcdiroption="--srcdir=$${topdir}/libiberty"; \
 	  libsrcdir="$$s/libiberty"; \
-	fi; \
 	rm -f no-such-file || : ; \
 	CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
 	  $(TARGET_CONFIGARGS) $${srcdiroption} \
@@ -23276,6 +23462,107 @@ install-target-rda: installdirs
 	  $(MAKE) $(TARGET_FLAGS_TO_PASS) install)
 
 
+.PHONY: configure-target-libada maybe-configure-target-libada
+maybe-configure-target-libada:
+
+# There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
+$(TARGET_SUBDIR)/libada/multilib.out: multilib.out
+	$(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libada ; \
+	rm -f $(TARGET_SUBDIR)/libada/Makefile || : ; \
+	cp multilib.out $(TARGET_SUBDIR)/libada/multilib.out
+
+configure-target-libada: $(TARGET_SUBDIR)/libada/multilib.out
+	@test ! -f $(TARGET_SUBDIR)/libada/Makefile || exit 0; \
+	$(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libada ; \
+	r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	AR="$(AR_FOR_TARGET)"; export AR; \
+	AS="$(AS_FOR_TARGET)"; export AS; \
+	CC="$(CC_FOR_TARGET)"; export CC; \
+	CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+	CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \
+	CXX="$(CXX_FOR_TARGET)"; export CXX; \
+	CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+	GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+	DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+	LD="$(LD_FOR_TARGET)"; export LD; \
+	LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+	NM="$(NM_FOR_TARGET)"; export NM; \
+	RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+	WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+	echo Configuring in $(TARGET_SUBDIR)/libada; \
+	cd "$(TARGET_SUBDIR)/libada" || exit 1; \
+	case $(srcdir) in \
+	  /* | [A-Za-z]:[\\/]*) \
+	    topdir=$(srcdir) ;; \
+	  *) \
+	    case "$(TARGET_SUBDIR)" in \
+	      .) topdir="../$(srcdir)" ;; \
+	      *) topdir="../../$(srcdir)" ;; \
+	    esac ;; \
+	esac; \
+	if [ "$(srcdir)" = "." ] ; then \
+	  if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+	    if $(SHELL) $$s/symlink-tree $${topdir}/libada "no-such-file" ; then \
+	      if [ -f Makefile ]; then \
+	        if $(MAKE) distclean; then \
+	          true; \
+	        else \
+	          exit 1; \
+	        fi; \
+	      else \
+	        true; \
+	      fi; \
+	    else \
+	      exit 1; \
+	    fi; \
+	  else \
+	    true; \
+	  fi; \
+	  srcdiroption="--srcdir=."; \
+	  libsrcdir="."; \
+	else \
+	  srcdiroption="--srcdir=$${topdir}/libada"; \
+	  libsrcdir="$$s/libada"; \
+	fi; \
+	rm -f no-such-file || : ; \
+	CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+	  $(TARGET_CONFIGARGS) $${srcdiroption} \
+	  --with-target-subdir="$(TARGET_SUBDIR)" \
+	  || exit 1
+
+.PHONY: all-target-libada maybe-all-target-libada
+maybe-all-target-libada:
+all-target-libada: configure-target-libada
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(TARGET_FLAGS_TO_PASS)  all)
+
+.PHONY: check-target-libada maybe-check-target-libada
+maybe-check-target-libada:
+
+check-target-libada:
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(TARGET_FLAGS_TO_PASS)  check)
+
+
+.PHONY: install-target-libada maybe-install-target-libada
+maybe-install-target-libada:
+
+install-target-libada: installdirs
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(SET_LIB_PATH) \
+	(cd $(TARGET_SUBDIR)/libada && \
+	  $(MAKE) $(TARGET_FLAGS_TO_PASS) install)
+
+
 
 # ----------
 # GCC module
@@ -23571,6 +23858,7 @@ ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
 configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
 configure-target-fastjar: maybe-configure-target-zlib
 all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
+configure-target-libada: $(ALL_GCC_C)
 configure-target-libf2c: $(ALL_GCC_C)
 all-target-libf2c: maybe-all-target-libiberty
 configure-target-libffi: $(ALL_GCC_C) 
diff --git a/configure b/configure
index 88d3753ed..13384a42b 100755
--- a/configure
+++ b/configure
@@ -12,6 +12,8 @@ ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
 ac_help="$ac_help
+  --enable-libada        Builds libada directory"
+ac_help="$ac_help
   --enable-serial-[{host,target,build}-]configure
                           Force sequential configuration of
                           sub-packages for the host, target or build
@@ -577,7 +579,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:581: checking host system type" >&5
+echo "configure:583: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -598,7 +600,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:602: checking target system type" >&5
+echo "configure:604: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -616,7 +618,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:620: checking build system type" >&5
+echo "configure:622: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -671,7 +673,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:675: checking for a BSD compatible install" >&5
+echo "configure:677: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -891,7 +893,8 @@ target_libraries="target-libiberty \
 		target-libstdc++-v3 \
 		target-libf2c \
 		${libgcj} \
-		target-libobjc"
+		target-libobjc \
+		target-libada"
 
 # these tools are built using the target libraries, and are intended to
 # run only in the target environment
@@ -1038,26 +1041,26 @@ case "${host}" in
     noconfigdirs="$noconfigdirs byacc"
     ;;
   i[3456789]86-*-vsta)
-    noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
     ;;
   i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
-    noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
     ;;
   i[3456789]86-*-mingw32*)
     # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
-    noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
     ;;
   i[3456789]86-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
     ;;
   *-*-cygwin*)
-    noconfigdirs="autoconf automake send-pr rcs guile perl"
+    noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
     ;;
   *-*-netbsd*)
-    noconfigdirs="rcs"
+    noconfigdirs="$noconfigdirs rcs"
     ;;
   ppc*-*-pe)
-    noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
     ;;
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
@@ -1067,6 +1070,18 @@ case "${host}" in
     ;;
 esac
 
+# Check whether --enable-libada or --disable-libada was given.
+if test "${enable_libada+set}" = set; then
+  enableval="$enable_libada"
+  ENABLE_LIBADA=$enableval
+else
+  ENABLE_LIBADA=yes
+fi
+
+if test "${ENABLE_LIBADA}" != "yes" ; then
+  noconfigdirs="$noconfigdirs target-libada"
+fi
+
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
 libgcj_saved=$libgcj
@@ -1364,7 +1379,7 @@ case "${target}" in
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
     target_configdirs="$target_configdirs target-winsup"
@@ -1386,7 +1401,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
     ;;
   rs6000-*-*)
     noconfigdirs="$noconfigdirs gprof ${libgcj}"
@@ -2011,7 +2026,7 @@ fi
 # Default to using --with-stabs for certain targets.
 if test x${with_stabs} = x ; then
   case "${target}" in
-  mips*-*-irix6*)
+  mips*-*-irix[56]*)
     ;;
   mips*-*-* | alpha*-*-osf*)
     with_stabs=yes;
@@ -2837,7 +2852,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2841: checking for $ac_word" >&5
+echo "configure:2856: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2870,7 +2885,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2874: checking for $ac_word" >&5
+echo "configure:2889: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2909,7 +2924,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2913: checking for $ac_word" >&5
+echo "configure:2928: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2942,7 +2957,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2946: checking for $ac_word" >&5
+echo "configure:2961: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2981,7 +2996,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2985: checking for $ac_word" >&5
+echo "configure:3000: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3014,7 +3029,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3018: checking for $ac_word" >&5
+echo "configure:3033: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3053,7 +3068,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3057: checking for $ac_word" >&5
+echo "configure:3072: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3086,7 +3101,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3090: checking for $ac_word" >&5
+echo "configure:3105: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3125,7 +3140,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3129: checking for $ac_word" >&5
+echo "configure:3144: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3158,7 +3173,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3162: checking for $ac_word" >&5
+echo "configure:3177: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3197,7 +3212,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3201: checking for $ac_word" >&5
+echo "configure:3216: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3230,7 +3245,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3234: checking for $ac_word" >&5
+echo "configure:3249: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3269,7 +3284,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3273: checking for $ac_word" >&5
+echo "configure:3288: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3302,7 +3317,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3306: checking for $ac_word" >&5
+echo "configure:3321: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3341,7 +3356,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3345: checking for $ac_word" >&5
+echo "configure:3360: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3374,7 +3389,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3378: checking for $ac_word" >&5
+echo "configure:3393: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3413,7 +3428,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3417: checking for $ac_word" >&5
+echo "configure:3432: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3446,7 +3461,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3450: checking for $ac_word" >&5
+echo "configure:3465: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3495,7 +3510,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3499: checking for $ac_word" >&5
+echo "configure:3514: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3528,7 +3543,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3532: checking for $ac_word" >&5
+echo "configure:3547: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3567,7 +3582,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3571: checking for $ac_word" >&5
+echo "configure:3586: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3600,7 +3615,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3604: checking for $ac_word" >&5
+echo "configure:3619: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3639,7 +3654,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3643: checking for $ac_word" >&5
+echo "configure:3658: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3672,7 +3687,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3676: checking for $ac_word" >&5
+echo "configure:3691: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3711,7 +3726,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3715: checking for $ac_word" >&5
+echo "configure:3730: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3744,7 +3759,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3748: checking for $ac_word" >&5
+echo "configure:3763: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3783,7 +3798,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3787: checking for $ac_word" >&5
+echo "configure:3802: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3816,7 +3831,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3820: checking for $ac_word" >&5
+echo "configure:3835: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3855,7 +3870,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3859: checking for $ac_word" >&5
+echo "configure:3874: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3888,7 +3903,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3892: checking for $ac_word" >&5
+echo "configure:3907: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3927,7 +3942,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3931: checking for $ac_word" >&5
+echo "configure:3946: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3960,7 +3975,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3964: checking for $ac_word" >&5
+echo "configure:3979: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4027,7 +4042,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4031: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4046: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
diff --git a/configure.in b/configure.in
index b286f1aa7..bfbb6a1b0 100644
--- a/configure.in
+++ b/configure.in
@@ -1,5 +1,5 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-#   1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -151,7 +151,8 @@ target_libraries="target-libiberty \
 		target-libstdc++-v3 \
 		target-libf2c \
 		${libgcj} \
-		target-libobjc"
+		target-libobjc \
+		target-libada"
 
 # these tools are built using the target libraries, and are intended to
 # run only in the target environment
@@ -277,26 +278,26 @@ case "${host}" in
     noconfigdirs="$noconfigdirs byacc"
     ;;
   i[[3456789]]86-*-vsta)
-    noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
     ;;
   i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
-    noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
     ;;
   i[[3456789]]86-*-mingw32*)
     # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
-    noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
     ;;
   i[[3456789]]86-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
     ;;
   *-*-cygwin*)
-    noconfigdirs="autoconf automake send-pr rcs guile perl"
+    noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
     ;;
   *-*-netbsd*)
-    noconfigdirs="rcs"
+    noconfigdirs="$noconfigdirs rcs"
     ;;
   ppc*-*-pe)
-    noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
     ;;
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
@@ -306,6 +307,14 @@ case "${host}" in
     ;;
 esac
 
+AC_ARG_ENABLE(libada,
+[  --enable-libada        Builds libada directory],
+ENABLE_LIBADA=$enableval,
+ENABLE_LIBADA=yes)
+if test "${ENABLE_LIBADA}" != "yes" ; then
+  noconfigdirs="$noconfigdirs target-libada"
+fi
+
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
 libgcj_saved=$libgcj
@@ -603,7 +612,7 @@ case "${target}" in
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
     target_configdirs="$target_configdirs target-winsup"
@@ -625,7 +634,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
     ;;
   rs6000-*-*)
     noconfigdirs="$noconfigdirs gprof ${libgcj}"
@@ -1250,7 +1259,7 @@ fi
 # Default to using --with-stabs for certain targets.
 if test x${with_stabs} = x ; then
   case "${target}" in
-  mips*-*-irix6*)
+  mips*-*-irix[[56]]*)
     ;;
   mips*-*-* | alpha*-*-osf*)
     with_stabs=yes;
diff --git a/include/elf/ChangeLog b/include/elf/ChangeLog
index 4a4501eb8..ea008d624 100644
--- a/include/elf/ChangeLog
+++ b/include/elf/ChangeLog
@@ -1,3 +1,15 @@
+2004-01-28  Roland McGrath  <roland@redhat.com>
+
+	* common.h (AT_SECURE): New macro.
+
+2004-01-21  Roland McGrath  <roland@redhat.com>
+
+	* common.h (AT_SUN_UID, AT_SUN_RUID, AT_SUN_GID): New macros.
+	(AT_SUN_RGID, AT_SUN_LDELF, AT_SUN_LDSHDR, AT_SUN_LDNAME,
+	AT_SUN_LPAGESZ, AT_SUN_PLATFORM, AT_SUN_HWCAP, AT_SUN_IFLUSH,
+	AT_SUN_CPU, AT_SUN_EMUL_ENTRY, AT_SUN_EMUL_EXECFD,
+	AT_SUN_EXECNAME) AT_SUN_MMU, AT_SUN_LDDATA): Likewise.
+
 2004-01-17  Mark Kettenis  <kettenis@gnu.org>
 
 	* common.h (NT_OPENBSD_IDENT): Define.
diff --git a/include/elf/common.h b/include/elf/common.h
index 15aa5d9b1..bf233f61d 100644
--- a/include/elf/common.h
+++ b/include/elf/common.h
@@ -721,9 +721,30 @@
 #define AT_ICACHEBSIZE	20		/* Instruction cache block size.  */
 #define AT_UCACHEBSIZE	21		/* Unified cache block size.  */
 #define AT_IGNOREPPC	22		/* Entry should be ignored */
+#define	AT_SECURE	23		/* Boolean, was exec setuid-like?  */
 /* Pointer to the global system page used for system calls and other
    nice things.  */
 #define AT_SYSINFO	32
-#define AT_SYSINFO_EHDR	33
+#define AT_SYSINFO_EHDR	33 /* Pointer to ELF header of system-supplied DSO.  */
+
+#define AT_SUN_UID      2000    /* Effective user ID.  */
+#define AT_SUN_RUID     2001    /* Real user ID.  */
+#define AT_SUN_GID      2002    /* Effective group ID.  */
+#define AT_SUN_RGID     2003    /* Real group ID.  */
+#define AT_SUN_LDELF    2004    /* Dynamic linker's ELF header.  */
+#define AT_SUN_LDSHDR   2005    /* Dynamic linker's section headers.  */
+#define AT_SUN_LDNAME   2006    /* String giving name of dynamic linker.  */
+#define AT_SUN_LPAGESZ  2007    /* Large pagesize.   */
+#define AT_SUN_PLATFORM 2008    /* Platform name string.  */
+#define AT_SUN_HWCAP    2009	/* Machine dependent hints about
+				   processor capabilities.  */
+#define AT_SUN_IFLUSH   2010    /* Should flush icache? */
+#define AT_SUN_CPU      2011    /* CPU name string.  */
+#define AT_SUN_EMUL_ENTRY 2012	/* COFF entry point address.  */
+#define AT_SUN_EMUL_EXECFD 2013	/* COFF executable file descriptor.  */
+#define AT_SUN_EXECNAME 2014    /* Canonicalized file name given to execve.  */
+#define AT_SUN_MMU      2015    /* String for name of MMU module.   */
+#define AT_SUN_LDDATA   2016    /* Dynamic linker's data segment address.  */
+
 
 #endif /* _ELF_COMMON_H */
diff --git a/include/opcode/ChangeLog b/include/opcode/ChangeLog
index 8f0d6d763..438c6d8ad 100644
--- a/include/opcode/ChangeLog
+++ b/include/opcode/ChangeLog
@@ -1,3 +1,7 @@
+2004-02-09  Anil Paranjpe  <anilp1@KPITCummins.com>
+
+	* h8300.h (32bit ldc/stc): Add relaxing support.
+
 2004-01-12  Anil Paranjpe  <anilp1@KPITCummins.com>
 	
 	* h8300.h (BITOP): Pass MEMRELAX flag.
diff --git a/include/opcode/h8300.h b/include/opcode/h8300.h
index 76d42e58a..29374df5b 100644
--- a/include/opcode/h8300.h
+++ b/include/opcode/h8300.h
@@ -1434,8 +1434,9 @@ struct h8_opcode h8_opcodes[] =
   {O (O_LDC, SW), AV_H8S,  2, "ldc", {{DISP32SRC,  EXR     | DST, E}}, {{PREFIXLDC, 0x7, 0x8, B30 | DISPREG, 0x0, 0x6, 0xB, 0x2, IGNORE, SRC | DISP32LIST, E}}},
   {O (O_LDC, SW), AV_H8H,  2, "ldc", {{ABS16SRC,   CCR     | DST, E}}, {{PREFIXLDC, 0x6, 0xB, 0x0, IGNORE, SRC | ABS16LIST, E}}},
   {O (O_LDC, SW), AV_H8S,  2, "ldc", {{ABS16SRC,   EXR     | DST, E}}, {{PREFIXLDC, 0x6, 0xB, 0x0, IGNORE, SRC | ABS16LIST, E}}},
-  {O (O_LDC, SW), AV_H8H,  2, "ldc", {{ABS32SRC,   CCR     | DST, E}}, {{PREFIXLDC, 0x6, 0xB, 0x2, IGNORE, SRC | ABS32LIST, E}}},
-  {O (O_LDC, SW), AV_H8S,  2, "ldc", {{ABS32SRC,   EXR     | DST, E}}, {{PREFIXLDC, 0x6, 0xB, 0x2, IGNORE, SRC | ABS32LIST, E}}},
+  {O (O_LDC, SW), AV_H8H,  2, "ldc", {{ABS32SRC,   CCR     | DST, E}}, {{PREFIXLDC, 0x6, 0xB, 0x2, IGNORE, SRC | MEMRELAX | ABS32LIST, E}}},
+  {O (O_LDC, SW), AV_H8S,  2, "ldc", {{ABS32SRC,   EXR     | DST, E}}, {{PREFIXLDC, 0x6, 0xB, 0x2, IGNORE, SRC | MEMRELAX | ABS32LIST, E}}},
+
   {O (O_LDC, SL), AV_H8SX, 0, "ldc", {{RS32, B30 | VBR_SBR | DST, E}}, {{0x0, 0x3, B30 | VBR_SBR | DST, RS32, E}}},
 
 
@@ -1809,8 +1810,8 @@ struct h8_opcode h8_opcodes[] =
   {O (O_STC, SW), AV_H8S,  2, "stc", {{EXR | SRC, DISP32DST,      E}}, {{PREFIXSTC, 0x7, 0x8, B30 | DSTDISPREG, 0, 0x6, 0xB, 0xA, IGNORE, DSTDISP32LIST, E}}},
   {O (O_STC, SW), AV_H8H,  2, "stc", {{CCR | SRC, ABS16DST,       E}}, {{PREFIXSTC, 0x6, 0xB, 0x8, IGNORE, DST | ABS16LIST, E}}},
   {O (O_STC, SW), AV_H8S,  2, "stc", {{EXR | SRC, ABS16DST,       E}}, {{PREFIXSTC, 0x6, 0xB, 0x8, IGNORE, DST | ABS16LIST, E}}},
-  {O (O_STC, SW), AV_H8H,  2, "stc", {{CCR | SRC, ABS32DST,       E}}, {{PREFIXSTC, 0x6, 0xB, 0xA, IGNORE, DST | ABS32LIST, E}}},
-  {O (O_STC, SW), AV_H8S,  2, "stc", {{EXR | SRC, ABS32DST,       E}}, {{PREFIXSTC, 0x6, 0xB, 0xA, IGNORE, DST | ABS32LIST, E}}},
+  {O (O_STC, SW), AV_H8H,  2, "stc", {{CCR | SRC, ABS32DST,       E}}, {{PREFIXSTC, 0x6, 0xB, 0xA, IGNORE, DST | MEMRELAX | ABS32LIST, E}}},
+  {O (O_STC, SW), AV_H8S,  2, "stc", {{EXR | SRC, ABS32DST,       E}}, {{PREFIXSTC, 0x6, 0xB, 0xA, IGNORE, DST | MEMRELAX | ABS32LIST, E}}},
   {O (O_STC, SL), AV_H8SX, 0, "stc", {{B30 | VBR_SBR | SRC, RD32, E}}, {{0x0, 0x2, B30 | VBR_SBR | SRC, RD32, E}}},