libgloss: merge microblaze into top-level Makefile

Avoid a recursive make to speed things up a bit.
A microblaze-elf build shows installed objects & libs produce same code.

2 files changed, 91 insertions, 150 deletions

diff --git a/libgloss/microblaze/Makefile.in b/libgloss/microblaze/Makefile.in
deleted file mode 100644
index 8437378f8..000000000
--- a/libgloss/microblaze/Makefile.in
+++ /dev/null
@@ -1,150 +0,0 @@
-#  Copyright 2007, 2009 Xilinx, Inc.  All rights reserved. 
-#  
-#  Redistribution and use in source and binary forms, with or without
-#  modification, are permitted provided that the following conditions are
-#  met:
-#  
-#  1.  Redistributions source code must retain the above copyright notice,
-#  this list of conditions and the following disclaimer. 
-#  
-#  2.  Redistributions in binary form must reproduce the above copyright
-#  notice, this list of conditions and the following disclaimer in the
-#  documentation and/or other materials provided with the distribution. 
-#  
-#  3.  Neither the name of Xilinx nor the names of its contributors may be
-#  used to endorse or promote products derived from this software without
-#  specific prior written permission. 
-#  
-#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS "AS
-#  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-#  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-#  PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-#  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-#  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-#  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-#  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-#  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-#  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Makefile for libgloss/microblaze. This is the board support
-# code for the various microblaze targets.
-
-DESTDIR =
-VPATH = @srcdir@
-srcdir = @srcdir@
-objdir = .
-srcroot = $(srcdir)/../..
-objroot = $(objdir)/../..
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-host_alias = @host_alias@
-target_alias = @target_alias@
-
-bindir = @bindir@
-libdir = @libdir@
-tooldir = $(exec_prefix)/$(target_alias)
-
-# Multilib support variables.
-# TOP is used instead of MULTI{BUILD,SRC}TOP.
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-SHELL = /bin/sh
-
-mkinstalldirs = $(SHELL) $(srcroot)/mkinstalldirs
-
-CC = @CC@
-
-AS = @AS@
-AR = @AR@
-LD = @LD@
-RANLIB = @RANLIB@
-AR_FLAGS = qrv
-
-OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
-	then echo ${objroot}/../binutils/objdump ; \
-	else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
-OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
-	then echo ${objroot}/../binutils/objcopy ; \
-	else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
-
-CRT = crt0.o crt1.o crt2.o crt3.o crt4.o crtinit.o pgcrtinit.o sim-crtinit.o sim-pgcrtinit.o
-LIB = libgloss.a
-GENOBJS = fstat.o getpid.o isatty.o kill.o lseek.o print.o putnum.o stat.o unlink.o \
-          open.o close.o read.o write.o
-OBJS = ${GENOBJS} sbrk.o timer.o _exception_handler.o _hw_exception_handler.o \
-       _interrupt_handler.o _program_clean.o _program_init.o \
-       xil_malloc.o xil_sbrk.o xil_printf.o
-SCRIPTS	= xilinx.ld
-
-# Tiny Linux BSP.
-LINUX_BSP     = libgloss-linux.a
-CRT          += linux-crt0.o
-LINUX_OBJS    = linux-syscalls.o linux-syscalls-wrap.o
-LINUX_OBJS   += linux-outbyte.o linux-inbyte.o
-LINUX_SCRIPTS = elf-gloss-linux.specs
-
-CPU = @CPU@
-
-#### Host specific Makefile fragment comes in here.
-@host_makefile_frag@
-
-all: ${CRT} ${LIB} ${LINUX_BSP}
-
-install: ${CRT} ${LIB} install-linux
-	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
-	@for crt in ${CRT}; do \
-	$(INSTALL_PROGRAM) $${crt} $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$${crt}; \
-	done
-	$(INSTALL_PROGRAM) ${LIB} $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}
-	$(INSTALL_PROGRAM) $(srcdir)/${SCRIPTS} $(DESTDIR)$(tooldir)/lib/
-
-install-linux: ${LINUX_BSP}
-	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
-	$(INSTALL_PROGRAM) ${LINUX_BSP} $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}
-	set -e; for x in ${LINUX_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
-
-crt0.o:	crt0.S
-crt1.o:	crt1.S
-crt2.o:	crt2.S
-crt3.o:	crt3.S
-crt4.o:	crt4.S
-linux-crt0.o: linux-crt0.S
-crtinit.o: crtinit.S
-sim-crtinit.o: sim-crtinit.S
-sim-pgcrtinit.o: sim-pgcrtinit.S
-sbrk.o: sbrk.c
-
-# target specific makefile fragment comes in here.
-@target_makefile_frag@
-
-clean mostlyclean:
-	rm -f *.o *.a *.map *.x
-
-distclean maintainer-clean realclean: clean
-	rm -f Makefile config.cache config.log config.status
-
-${LIB}:	${OBJS}
-	${AR} ${ARFLAGS} $@ ${OBJS}
-	${RANLIB} $@
-
-${LINUX_BSP}: ${LINUX_OBJS}
-	${AR} ${ARFLAGS} $@ ${LINUX_OBJS}
-	${RANLIB} $@
-
-.PHONY: info dvi doc install-info clean-info
-info doc dvi:
-install-info:
-clean-info:
-
-Makefile: Makefile.in ../config.status
-	cd .. && $(SHELL) config.status
diff --git a/libgloss/microblaze/Makefile.inc b/libgloss/microblaze/Makefile.inc
new file mode 100644
index 000000000..ca1e8bf83
--- /dev/null
+++ b/libgloss/microblaze/Makefile.inc
@@ -0,0 +1,91 @@
+##  Copyright 2007, 2009 Xilinx, Inc.  All rights reserved.
+##
+##  Redistribution and use in source and binary forms, with or without
+##  modification, are permitted provided that the following conditions are
+##  met:
+##
+##  1.  Redistributions source code must retain the above copyright notice,
+##  this list of conditions and the following disclaimer.
+##
+##  2.  Redistributions in binary form must reproduce the above copyright
+##  notice, this list of conditions and the following disclaimer in the
+##  documentation and/or other materials provided with the distribution.
+##
+##  3.  Neither the name of Xilinx nor the names of its contributors may be
+##  used to endorse or promote products derived from this software without
+##  specific prior written permission.
+##
+##  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS "AS
+##  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+##  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+##  PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+##  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+##  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+##  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+##  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+##  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+##  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+if !HAVE_MULTISUBDIR
+multilibtool_DATA += \
+	%D%/xilinx.ld
+endif
+multilibtool_DATA += \
+	%D%/elf-gloss-linux.specs
+
+multilibtool_DATA += \
+	%D%/crt0.o \
+	%D%/crt1.o \
+	%D%/crt2.o \
+	%D%/crt3.o \
+	%D%/crt4.o \
+	%D%/crtinit.o \
+	%D%/pgcrtinit.o \
+	%D%/sim-crtinit.o \
+	%D%/sim-pgcrtinit.o \
+	%D%/linux-crt0.o
+libobjs_a_SOURCES += \
+	%D%/crt0.S \
+	%D%/crt1.S \
+	%D%/crt2.S \
+	%D%/crt3.S \
+	%D%/crt4.S \
+	%D%/crtinit.S \
+	%D%/pgcrtinit.S \
+	%D%/sim-crtinit.S \
+	%D%/sim-pgcrtinit.S \
+	%D%/linux-crt0.S
+
+multilibtool_LIBRARIES += %D%/libgloss.a
+%C%_libgloss_a_SOURCES = \
+	fstat.c \
+	getpid.c \
+	isatty.c \
+	kill.c \
+	lseek.c \
+	print.c \
+	putnum.c \
+	stat.c \
+	unlink.c \
+	open.c \
+	close.c \
+	read.c \
+	write.c \
+	%D%/sbrk.c \
+	%D%/timer.c \
+	%D%/_exception_handler.S \
+	%D%/_hw_exception_handler.S \
+	%D%/_interrupt_handler.S \
+	%D%/_program_clean.S \
+	%D%/_program_init.S \
+	%D%/xil_malloc.c \
+	%D%/xil_sbrk.c \
+	%D%/xil_printf.c
+
+multilibtool_LIBRARIES += %D%/libgloss-linux.a
+%C%_libgloss_linux_a_SOURCES = \
+	%D%/linux-syscalls.S \
+	%D%/linux-syscalls-wrap.c \
+	%D%/linux-outbyte.c \
+	%D%/linux-inbyte.c