libtool.m4: fix nm BSD flag detection

Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support.  Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:

 - it runs the test by doing an nm of /dev/null.  Some platforms
   reasonably refuse to do an nm on a device file, but before now this
   has only been worked around by assuming that the error message has a
   specific textual form emitted by Tru64 nm, and that getting this
   error means this is Tru64 nm and that nm -B would work to produce
   BSD-format output, even though the test never actually got anything
   but an error message out of nm -B.  This is fixable by nm'ing *nm
   itself* (since we necessarily have a path to it).

 - the test is entirely skipped if NM is set in the environment, on the
   grounds that the user has overridden the test: but the user cannot
   reasonably be expected to know that libtool wants not only nm but
   also flags forcing BSD-format output.  Worse yet, one such "user" is
   the top-level Cygnus configure script, which neither tests for
   nor specifies any BSD-format flags.  So platforms needing BSD-format
   flags always fail to set them when run in a Cygnus tree, breaking
   -export-symbols-regex on such platforms.  Libtool also needs to
   augment $LD on some platforms, but this is done unconditionally,
   augmenting whatever the user specified: the nm check should do the
   same.

   One wrinkle: if the user has overridden $NM, a path might have been
   provided: so we use the user-specified path if there was one, and
   otherwise do the path search as usual.  (If the nm specified doesn't
   work, this might lead to a few extra pointless path searches -- but
   the test is going to fail anyway, so that's not a problem.)

(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)

ChangeLog
2021-09-27  Nick Alcock  <nick.alcock@oracle.com>

	PR libctf/27967
	* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
	NM, if there is one.  Run nm on itself, not on /dev/null, to avoid
	errors from nms that refuse to work on non-regular files.  Remove
	other workarounds for this problem.  Strip out blank lines from the
	nm output.

3 files changed, 135 insertions, 132 deletions

diff --git a/newlib/libm/machine/configure b/newlib/libm/machine/configure
index 62aa88880..da8ea13ca 100755
--- a/newlib/libm/machine/configure
+++ b/newlib/libm/machine/configure
@@ -5461,48 +5461,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+	 break
+	 ;;
+       *)
+	 case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+	 *$tmp_nm*)
+	   lt_cv_path_NM="$tmp_nm -p"
+	   break
+	   ;;
+	 *)
+	   lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	   continue # so that we can try to find one that supports BSD flags
+	   ;;
+	 esac
+	 ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11439,7 +11440,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11442 "configure"
+#line 11443 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11545,7 +11546,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11548 "configure"
+#line 11549 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
diff --git a/newlib/libm/machine/i386/configure b/newlib/libm/machine/i386/configure
index 2c9cd51a2..9156c0de9 100755
--- a/newlib/libm/machine/i386/configure
+++ b/newlib/libm/machine/i386/configure
@@ -5446,48 +5446,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+	 break
+	 ;;
+       *)
+	 case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+	 *$tmp_nm*)
+	   lt_cv_path_NM="$tmp_nm -p"
+	   break
+	   ;;
+	 *)
+	   lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	   continue # so that we can try to find one that supports BSD flags
+	   ;;
+	 esac
+	 ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11424,7 +11425,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11427 "configure"
+#line 11428 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11530,7 +11531,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11533 "configure"
+#line 11534 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
diff --git a/newlib/libm/machine/x86_64/configure b/newlib/libm/machine/x86_64/configure
index adf07da45..7457ca36d 100755
--- a/newlib/libm/machine/x86_64/configure
+++ b/newlib/libm/machine/x86_64/configure
@@ -5446,48 +5446,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+	 break
+	 ;;
+       *)
+	 case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+	 *$tmp_nm*)
+	   lt_cv_path_NM="$tmp_nm -p"
+	   break
+	   ;;
+	 *)
+	   lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	   continue # so that we can try to find one that supports BSD flags
+	   ;;
+	 esac
+	 ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11424,7 +11425,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11427 "configure"
+#line 11428 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11530,7 +11531,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11533 "configure"
+#line 11534 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H