diff options
Diffstat (limited to 'include/opcode/crx.h')
| -rw-r--r-- | include/opcode/crx.h | 418 |
1 files changed, 0 insertions, 418 deletions
diff --git a/include/opcode/crx.h b/include/opcode/crx.h deleted file mode 100644 index 66def6b39..000000000 --- a/include/opcode/crx.h +++ /dev/null @@ -1,418 +0,0 @@ -/* crx.h -- Header file for CRX opcode and register tables. - Copyright 2004 Free Software Foundation, Inc. - Contributed by Tomer Levi, NSC, Israel. - Originally written for GAS 2.12 by Tomer Levi, NSC, Israel. - Updates, BFDizing, GNUifying and ELF support by Tomer Levi. - - This file is part of GAS, GDB and the GNU binutils. - - GAS, GDB, and GNU binutils is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2, or (at your - option) any later version. - - GAS, GDB, and GNU binutils are distributed in the hope that they will be - useful, but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -#ifndef _CRX_H_ -#define _CRX_H_ - -/* CRX core/debug Registers : - The enums are used as indices to CRX registers table (crx_regtab). - Therefore, order MUST be preserved. */ - -typedef enum - { - /* 32-bit general purpose registers. */ - r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, - r10, r11, r12, r13, r14, r15, ra, sp, - /* 32-bit user registers. */ - u0, u1, u2, u3, u4, u5, u6, u7, u8, u9, - u10, u11, u12, u13, u14, u15, ura, usp, - /* hi and lo registers. */ - hi, lo, - /* hi and lo user registers. */ - uhi, ulo, - /* Processor Status Register. */ - psr, - /* Interrupt Base Register. */ - intbase, - /* Interrupt Stack Pointer Register. */ - isp, - /* Configuration Register. */ - cfg, - /* Coprocessor Configuration Register. */ - cpcfg, - /* Coprocessor Enable Register. */ - cen, - /* Not a register. */ - nullregister, - MAX_REG - } -reg; - -/* CRX Coprocessor registers and special registers : - The enums are used as indices to CRX coprocessor registers table - (crx_copregtab). Therefore, order MUST be preserved. */ - -typedef enum - { - /* Coprocessor registers. */ - c0 = MAX_REG, c1, c2, c3, c4, c5, c6, c7, c8, - c9, c10, c11, c12, c13, c14, c15, - /* Coprocessor special registers. */ - cs0, cs1 ,cs2, cs3, cs4, cs5, cs6, cs7, cs8, - cs9, cs10, cs11, cs12, cs13, cs14, cs15, - /* Not a Coprocessor register. */ - nullcopregister, - MAX_COPREG - } -copreg; - -/* CRX Register types. */ - -typedef enum - { - CRX_R_REGTYPE, /* r<N> */ - CRX_U_REGTYPE, /* u<N> */ - CRX_C_REGTYPE, /* c<N> */ - CRX_CS_REGTYPE, /* cs<N> */ - CRX_CFG_REGTYPE /* configuration register */ - } -reg_type; - -/* CRX argument types : - The argument types correspond to instructions operands - - Argument types : - r - register - c - constant - i - immediate - idxr - index register - rbase - register base - s - star ('*') - copr - coprocessor register - copsr - coprocessor special register. */ - -typedef enum - { - arg_r, arg_c, arg_cr, arg_ic, arg_icr, arg_sc, - arg_idxr, arg_rbase, arg_copr, arg_copsr, - /* Not an argument. */ - nullargs - } -argtype; - -/* CRX operand types : - The operand types correspond to instructions operands. */ - -typedef enum - { - dummy, - /* 4-bit encoded constant. */ - cst4, - /* N-bit immediate. */ - i16, i32, - /* N-bit unsigned immediate. */ - ui3, ui4, ui5, ui16, - /* N-bit signed displacement. */ - disps9, disps17, disps25, disps32, - /* N-bit unsigned displacement. */ - dispu5, - /* N-bit escaped displacement. */ - dispe9, - /* N-bit absolute address. */ - abs16, abs32, - /* Register relative. */ - rbase, rbase_dispu4, - rbase_disps12, rbase_disps16, rbase_disps28, rbase_disps32, - /* Register index. */ - rindex_disps6, rindex_disps22, - /* 4-bit genaral-purpose register specifier. */ - regr, - /* 8-bit register address space. */ - regr8, - /* coprocessor register. */ - copregr, - /* coprocessor special register. */ - copsregr, - /* Not an operand. */ - nulloperand, - /* Maximum supported operand. */ - MAX_OPRD - } -operand_type; - -/* CRX instruction types. */ - -#define NO_TYPE_INS 0 -#define ARITH_INS 1 -#define LD_STOR_INS 2 -#define BRANCH_INS 3 -#define ARITH_BYTE_INS 4 -#define CMPBR_INS 5 -#define SHIFT_INS 6 -#define BRANCH_NEQ_INS 7 -#define LD_STOR_INS_INC 8 -#define STOR_IMM_INS 9 -#define CSTBIT_INS 10 -#define COP_BRANCH_INS 11 -#define COP_REG_INS 12 -#define COPS_REG_INS 13 -#define DCR_BRANCH_INS 14 - -/* Maximum value supported for instruction types. */ -#define CRX_INS_MAX (1 << 4) -/* Mask to record an instruction type. */ -#define CRX_INS_MASK (CRX_INS_MAX - 1) -/* Return instruction type, given instruction's attributes. */ -#define CRX_INS_TYPE(attr) ((attr) & CRX_INS_MASK) - -/* Indicates whether this instruction has a register list as parameter. */ -#define REG_LIST CRX_INS_MAX -/* The operands in binary and assembly are placed in reverse order. - load - (REVERSE_MATCH)/store - (! REVERSE_MATCH). */ -#define REVERSE_MATCH (1 << 5) - -/* Kind of displacement map used DISPU[BWD]4. */ -#define DISPUB4 (1 << 6) -#define DISPUW4 (1 << 7) -#define DISPUD4 (1 << 8) -#define DISPU4MAP (DISPUB4 | DISPUW4 | DISPUD4) - -/* Printing formats, where the instruction prefix isn't consecutive. */ -#define FMT_1 (1 << 9) /* 0xF0F00000 */ -#define FMT_2 (1 << 10) /* 0xFFF0FF00 */ -#define FMT_3 (1 << 11) /* 0xFFF00F00 */ -#define FMT_4 (1 << 12) /* 0xFFF0F000 */ -#define FMT_5 (1 << 13) /* 0xFFF0FFF0 */ -#define FMT_CRX (FMT_1 | FMT_2 | FMT_3 | FMT_4 | FMT_5) - -/* Indicates whether this instruction can be relaxed. */ -#define RELAXABLE (1 << 14) - -/* Indicates that instruction uses user registers (and not - general-purpose registers) as operands. */ -#define USER_REG (1 << 15) - -/* Indicates that instruction can perfom a cst4 mapping. */ -#define CST4MAP (1 << 16) - -/* Instruction shouldn't allow 'sp' usage. */ -#define NO_SP (1 << 17) - -/* Instruction shouldn't allow to push a register which is used as a rptr. */ -#define NO_RPTR (1 << 18) - -/* Maximum operands per instruction. */ -#define MAX_OPERANDS 5 -/* Maximum register name length. */ -#define MAX_REGNAME_LEN 10 -/* Maximum instruction length. */ -#define MAX_INST_LEN 256 - - -/* Values defined for the flags field of a struct operand_entry. */ - -/* Operand must be an unsigned number. */ -#define OP_UNSIGNED (1 << 0) -/* Operand must be a signed number. */ -#define OP_SIGNED (1 << 1) -/* A special arithmetic 4-bit constant operand. */ -#define OP_CST4 (1 << 2) -/* A special load/stor 4-bit unsigned displacement operand. */ -#define OP_DISPU4 (1 << 3) -/* Operand must be an even number. */ -#define OP_EVEN (1 << 4) -/* Operand is shifted right. */ -#define OP_SHIFT (1 << 5) -/* Operand is shifted right and decremented. */ -#define OP_SHIFT_DEC (1 << 6) -/* Operand has reserved escape sequences. */ -#define OP_ESC (1 << 7) -/* Operand is used only for the upper 64 KB (FFFF0000 to FFFFFFFF). */ -#define OP_UPPER_64KB (1 << 8) - -/* Single operand description. */ - -typedef struct - { - /* Operand type. */ - operand_type op_type; - /* Operand location within the opcode. */ - unsigned int shift; - } -operand_desc; - -/* Instruction data structure used in instruction table. */ - -typedef struct - { - /* Name. */ - const char *mnemonic; - /* Size (in words). */ - unsigned int size; - /* Constant prefix (matched by the disassembler). */ - unsigned long match; - /* Match size (in bits). */ - int match_bits; - /* Attributes. */ - unsigned int flags; - /* Operands (always last, so unreferenced operands are initialized). */ - operand_desc operands[MAX_OPERANDS]; - } -inst; - -/* Data structure for a single instruction's arguments (Operands). */ - -typedef struct - { - /* Register or base register. */ - reg r; - /* Index register. */ - reg i_r; - /* Coprocessor register. */ - copreg cr; - /* Constant/immediate/absolute value. */ - long constant; - /* Scaled index mode. */ - unsigned int scale; - /* Argument type. */ - argtype type; - /* Size of the argument (in bits) required to represent. */ - int size; - /* The type of the expression. */ - unsigned char X_op; - } -argument; - -/* Internal structure to hold the various entities - corresponding to the current assembling instruction. */ - -typedef struct - { - /* Number of arguments. */ - int nargs; - /* The argument data structure for storing args (operands). */ - argument arg[MAX_OPERANDS]; -/* The following fields are required only by CRX-assembler. */ -#ifdef TC_CRX - /* Expression used for setting the fixups (if any). */ - expressionS exp; - bfd_reloc_code_real_type rtype; -#endif /* TC_CRX */ - /* Instruction size (in bytes). */ - int size; - } -ins; - -/* Structure to hold information about predefined operands. */ - -typedef struct - { - /* Size (in bits). */ - unsigned int bit_size; - /* Argument type. */ - argtype arg_type; - /* One bit syntax flags. */ - int flags; - } -operand_entry; - -/* Structure to hold trap handler information. */ - -typedef struct - { - /* Trap name. */ - char *name; - /* Index in dispatch table. */ - unsigned int entry; - } -trap_entry; - -/* Structure to hold information about predefined registers. */ - -typedef struct - { - /* Name (string representation). */ - char *name; - /* Value (enum representation). */ - union - { - /* Register. */ - reg reg_val; - /* Coprocessor register. */ - copreg copreg_val; - } value; - /* Register image. */ - int image; - /* Register type. */ - reg_type type; - } -reg_entry; - -/* Structure to hold a cst4 operand mapping. */ - -/* CRX opcode table. */ -extern const inst crx_instruction[]; -extern const int crx_num_opcodes; -#define NUMOPCODES crx_num_opcodes - -/* CRX operands table. */ -extern const operand_entry crx_optab[]; - -/* CRX registers table. */ -extern const reg_entry crx_regtab[]; -extern const int crx_num_regs; -#define NUMREGS crx_num_regs - -/* CRX coprocessor registers table. */ -extern const reg_entry crx_copregtab[]; -extern const int crx_num_copregs; -#define NUMCOPREGS crx_num_copregs - -/* CRX trap/interrupt table. */ -extern const trap_entry crx_traps[]; -extern const int crx_num_traps; -#define NUMTRAPS crx_num_traps - -/* cst4 operand mapping. */ -extern const long cst4_map[]; -extern const int cst4_maps; - -/* Table of instructions with no operands. */ -extern const char* no_op_insn[]; - -/* Current instruction we're assembling. */ -extern const inst *instruction; - -/* A macro for representing the instruction "constant" opcode, that is, - the FIXED part of the instruction. The "constant" opcode is represented - as a 32-bit unsigned long, where OPC is expanded (by a left SHIFT) - over that range. */ -#define BIN(OPC,SHIFT) (OPC << SHIFT) - -/* Is the current instruction type is TYPE ? */ -#define IS_INSN_TYPE(TYPE) \ - (CRX_INS_TYPE(instruction->flags) == TYPE) - -/* Is the current instruction mnemonic is MNEMONIC ? */ -#define IS_INSN_MNEMONIC(MNEMONIC) \ - (strcmp(instruction->mnemonic,MNEMONIC) == 0) - -/* Does the current instruction has register list ? */ -#define INST_HAS_REG_LIST \ - (instruction->flags & REG_LIST) - -/* Long long type handling. */ -/* Replace all appearances of 'long long int' with LONGLONG. */ -typedef long long int LONGLONG; -typedef unsigned long long ULONGLONG; - -#endif /* _CRX_H_ */ |