diff options
Diffstat (limited to 'include/opcode/mips.h')
| -rw-r--r-- | include/opcode/mips.h | 749 |
1 files changed, 0 insertions, 749 deletions
diff --git a/include/opcode/mips.h b/include/opcode/mips.h deleted file mode 100644 index 68fe57a8a..000000000 --- a/include/opcode/mips.h +++ /dev/null @@ -1,749 +0,0 @@ -/* mips.h. Mips opcode list for GDB, the GNU debugger. - Copyright 1993, 94, 95, 96, 1997 Free Software Foundation, Inc. - Contributed by Ralph Campbell and OSF - Commented and modified by Ian Lance Taylor, Cygnus Support - -This file is part of GDB, GAS, and the GNU binutils. - -GDB, GAS, and the GNU binutils are free software; you can redistribute -them and/or modify them under the terms of the GNU General Public -License as published by the Free Software Foundation; either version -1, or (at your option) any later version. - -GDB, GAS, and the GNU binutils are distributed in the hope that they -will be useful, but WITHOUT ANY WARRANTY; without even the implied -warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See -the GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this file; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -#ifndef _MIPS_H_ -#define _MIPS_H_ - -/* These are bit masks and shift counts to use to access the various - fields of an instruction. To retrieve the X field of an - instruction, use the expression - (i >> OP_SH_X) & OP_MASK_X - To set the same field (to j), use - i = (i &~ (OP_MASK_X << OP_SH_X)) | (j << OP_SH_X) - - Make sure you use fields that are appropriate for the instruction, - of course. - - The 'i' format uses OP, RS, RT and IMMEDIATE. - - The 'j' format uses OP and TARGET. - - The 'r' format uses OP, RS, RT, RD, SHAMT and FUNCT. - - The 'b' format uses OP, RS, RT and DELTA. - - The floating point 'i' format uses OP, RS, RT and IMMEDIATE. - - The floating point 'r' format uses OP, FMT, FT, FS, FD and FUNCT. - - A breakpoint instruction uses OP, CODE and SPEC (10 bits of the - breakpoint instruction are not defined; Kane says the breakpoint - code field in BREAK is 20 bits; yet MIPS assemblers and debuggers - only use ten bits). An optional two-operand form of break/sdbbp - allows the lower ten bits to be set too. - - The syscall instruction uses SYSCALL. - - The general coprocessor instructions use COPZ. */ - -#define OP_MASK_OP 0x3f -#define OP_SH_OP 26 -#define OP_MASK_RS 0x1f -#define OP_SH_RS 21 -#define OP_MASK_FR 0x1f -#define OP_SH_FR 21 -#define OP_MASK_FMT 0x1f -#define OP_SH_FMT 21 -#define OP_MASK_BCC 0x7 -#define OP_SH_BCC 18 -#define OP_MASK_CODE 0x3ff -#define OP_SH_CODE 16 -#define OP_MASK_CODE2 0x3ff -#define OP_SH_CODE2 6 -#define OP_MASK_RT 0x1f -#define OP_SH_RT 16 -#define OP_MASK_FT 0x1f -#define OP_SH_FT 16 -#define OP_MASK_CACHE 0x1f -#define OP_SH_CACHE 16 -#define OP_MASK_RD 0x1f -#define OP_SH_RD 11 -#define OP_MASK_FS 0x1f -#define OP_SH_FS 11 -#define OP_MASK_PREFX 0x1f -#define OP_SH_PREFX 11 -#define OP_MASK_CCC 0x7 -#define OP_SH_CCC 8 -#define OP_MASK_SYSCALL 0xfffff -#define OP_SH_SYSCALL 6 -#define OP_MASK_SHAMT 0x1f -#define OP_SH_SHAMT 6 -#define OP_MASK_FD 0x1f -#define OP_SH_FD 6 -#define OP_MASK_TARGET 0x3ffffff -#define OP_SH_TARGET 0 -#define OP_MASK_COPZ 0x1ffffff -#define OP_SH_COPZ 0 -#define OP_MASK_IMMEDIATE 0xffff -#define OP_SH_IMMEDIATE 0 -#define OP_MASK_DELTA 0xffff -#define OP_SH_DELTA 0 -#define OP_MASK_FUNCT 0x3f -#define OP_SH_FUNCT 0 -#define OP_MASK_SPEC 0x3f -#define OP_SH_SPEC 0 -#define OP_SH_LOCC 8 /* FP condition code */ -#define OP_SH_HICC 18 /* FP condition code */ -#define OP_MASK_CC 0x7 -#define OP_SH_COP1NORM 25 /* Normal COP1 encoding */ -#define OP_MASK_COP1NORM 0x1 /* a single bit */ -#define OP_SH_COP1SPEC 21 /* COP1 encodings */ -#define OP_MASK_COP1SPEC 0xf -#define OP_MASK_COP1SCLR 0x4 -#define OP_MASK_COP1CMP 0x3 -#define OP_SH_COP1CMP 4 -#define OP_SH_FORMAT 21 /* FP short format field */ -#define OP_MASK_FORMAT 0x7 -#define OP_SH_TRUE 16 -#define OP_MASK_TRUE 0x1 -#define OP_SH_GE 17 -#define OP_MASK_GE 0x01 -#define OP_SH_UNSIGNED 16 -#define OP_MASK_UNSIGNED 0x1 -#define OP_SH_HINT 16 -#define OP_MASK_HINT 0x1f -#define OP_SH_MMI 0 /* Multimedia (parallel) op */ -#define OP_MASK_MMI 0x3f -#define OP_SH_MMISUB 6 -#define OP_MASK_MMISUB 0x1f -#define OP_MASK_PERFREG 0x1f /* Performance monitoring */ -#define OP_SH_PERFREG 1 - -/* This structure holds information for a particular instruction. */ - -struct mips_opcode -{ - /* The name of the instruction. */ - const char *name; - /* A string describing the arguments for this instruction. */ - const char *args; - /* The basic opcode for the instruction. When assembling, this - opcode is modified by the arguments to produce the actual opcode - that is used. If pinfo is INSN_MACRO, then this is 0. */ - unsigned long match; - /* If pinfo is not INSN_MACRO, then this is a bit mask for the - relevant portions of the opcode when disassembling. If the - actual opcode anded with the match field equals the opcode field, - then we have found the correct instruction. If pinfo is - INSN_MACRO, then this field is the macro identifier. */ - unsigned long mask; - /* For a macro, this is INSN_MACRO. Otherwise, it is a collection - of bits describing the instruction, notably any relevant hazard - information. */ - unsigned long pinfo; - /* A collection of bits describing the instruction sets of which this - instruction or macro is a member. */ - unsigned long membership; -}; - -/* These are the characters which may appears in the args field of an - instruction. They appear in the order in which the fields appear - when the instruction is used. Commas and parentheses in the args - string are ignored when assembling, and written into the output - when disassembling. - - Each of these characters corresponds to a mask field defined above. - - "<" 5 bit shift amount (OP_*_SHAMT) - ">" shift amount between 32 and 63, stored after subtracting 32 (OP_*_SHAMT) - "a" 26 bit target address (OP_*_TARGET) - "b" 5 bit base register (OP_*_RS) - "c" 10 bit breakpoint code (OP_*_CODE) - "d" 5 bit destination register specifier (OP_*_RD) - "h" 5 bit prefx hint (OP_*_PREFX) - "i" 16 bit unsigned immediate (OP_*_IMMEDIATE) - "j" 16 bit signed immediate (OP_*_DELTA) - "k" 5 bit cache opcode in target register position (OP_*_CACHE) - "o" 16 bit signed offset (OP_*_DELTA) - "p" 16 bit PC relative branch target address (OP_*_DELTA) - "q" 10 bit extra breakpoint code (OP_*_CODE2) - "r" 5 bit same register used as both source and target (OP_*_RS) - "s" 5 bit source register specifier (OP_*_RS) - "t" 5 bit target register (OP_*_RT) - "u" 16 bit upper 16 bits of address (OP_*_IMMEDIATE) - "v" 5 bit same register used as both source and destination (OP_*_RS) - "w" 5 bit same register used as both target and destination (OP_*_RT) - "C" 25 bit coprocessor function code (OP_*_COPZ) - "B" 20 bit syscall function code (OP_*_SYSCALL) - "x" accept and ignore register name - "z" must be zero register - - Floating point instructions: - "D" 5 bit destination register (OP_*_FD) - "M" 3 bit compare condition code (OP_*_CCC) (only used for mips4 and up) - "N" 3 bit branch condition code (OP_*_BCC) (only used for mips4 and up) - "S" 5 bit fs source 1 register (OP_*_FS) - "T" 5 bit ft source 2 register (OP_*_FT) - "R" 5 bit fr source 3 register (OP_*_FR) - "V" 5 bit same register used as floating source and destination (OP_*_FS) - "W" 5 bit same register used as floating target and destination (OP_*_FT) - - Coprocessor instructions: - "E" 5 bit target register (OP_*_RT) - "G" 5 bit destination register (OP_*_RD) - "P" 5 bit performance-monitor register (OP_*_PERFREG) - - Macro instructions: - "A" General 32 bit expression - "I" 32 bit immediate - "F" 64 bit floating point constant in .rdata - "L" 64 bit floating point constant in .lit8 - "f" 32 bit floating point constant - "l" 32 bit floating point constant in .lit4 - - Other: - "()" parens surrounding optional value - "," separates operands - - Characters used so far, for quick reference when adding more: - "<>()," - "ABCDEFGILMNSTRVW" - "abcdfhijklopqrstuvwxz" -*/ - -/* These are the bits which may be set in the pinfo field of an - instructions, if it is not equal to INSN_MACRO. */ - -/* Modifies the general purpose register in OP_*_RD. */ -#define INSN_WRITE_GPR_D 0x00000001 -/* Modifies the general purpose register in OP_*_RT. */ -#define INSN_WRITE_GPR_T 0x00000002 -/* Modifies general purpose register 31. */ -#define INSN_WRITE_GPR_31 0x00000004 -/* Modifies the floating point register in OP_*_FD. */ -#define INSN_WRITE_FPR_D 0x00000008 -/* Modifies the floating point register in OP_*_FS. */ -#define INSN_WRITE_FPR_S 0x00000010 -/* Modifies the floating point register in OP_*_FT. */ -#define INSN_WRITE_FPR_T 0x00000020 -/* Reads the general purpose register in OP_*_RS. */ -#define INSN_READ_GPR_S 0x00000040 -/* Reads the general purpose register in OP_*_RT. */ -#define INSN_READ_GPR_T 0x00000080 -/* Reads the floating point register in OP_*_FS. */ -#define INSN_READ_FPR_S 0x00000100 -/* Reads the floating point register in OP_*_FT. */ -#define INSN_READ_FPR_T 0x00000200 -/* Reads the floating point register in OP_*_FR. */ -#define INSN_READ_FPR_R 0x00000400 -/* Modifies coprocessor condition code. */ -#define INSN_WRITE_COND_CODE 0x00000800 -/* Reads coprocessor condition code. */ -#define INSN_READ_COND_CODE 0x00001000 -/* TLB operation. */ -#define INSN_TLB 0x00002000 -/* Reads coprocessor register other than floating point register. */ -#define INSN_COP 0x00004000 -/* Instruction loads value from memory, requiring delay. */ -#define INSN_LOAD_MEMORY_DELAY 0x00008000 -/* Instruction loads value from coprocessor, requiring delay. */ -#define INSN_LOAD_COPROC_DELAY 0x00010000 -/* Instruction has unconditional branch delay slot. */ -#define INSN_UNCOND_BRANCH_DELAY 0x00020000 -/* Instruction has conditional branch delay slot. */ -#define INSN_COND_BRANCH_DELAY 0x00040000 -/* Conditional branch likely: if branch not taken, insn nullified. */ -#define INSN_COND_BRANCH_LIKELY 0x00080000 -/* Moves to coprocessor register, requiring delay. */ -#define INSN_COPROC_MOVE_DELAY 0x00100000 -/* Loads coprocessor register from memory, requiring delay. */ -#define INSN_COPROC_MEMORY_DELAY 0x00200000 -/* Reads the HI register. */ -#define INSN_READ_HI 0x00400000 -/* Reads the LO register. */ -#define INSN_READ_LO 0x00800000 -/* Modifies the HI register. */ -#define INSN_WRITE_HI 0x01000000 -/* Modifies the LO register. */ -#define INSN_WRITE_LO 0x02000000 -/* Takes a trap (easier to keep out of delay slot). */ -#define INSN_TRAP 0x04000000 -/* Instruction stores value into memory. */ -#define INSN_STORE_MEMORY 0x08000000 -/* Instruction uses single precision floating point. */ -#define FP_S 0x10000000 -/* Instruction uses double precision floating point. */ -#define FP_D 0x20000000 -/* Instruction is part of the tx39's integer multiply family. */ -#define INSN_MULT 0x40000000 -/* Instruction synchronize shared memory. */ -#define INSN_SYNC 0x80000000 - -/* Instruction is actually a macro. It should be ignored by the - disassembler, and requires special treatment by the assembler. */ -#define INSN_MACRO 0xffffffff - - - - - -/* MIPS ISA field--CPU level at which insn is supported. */ -#define INSN_ISA 0x0000000F -/* An instruction which is not part of any basic MIPS ISA. - (ie it is a chip specific instruction) */ -#define INSN_NO_ISA 0x00000000 -/* MIPS ISA 1 instruction. */ -#define INSN_ISA1 0x00000001 -/* MIPS ISA 2 instruction (R6000 or R4000). */ -#define INSN_ISA2 0x00000002 -/* MIPS ISA 3 instruction (R4000). */ -#define INSN_ISA3 0x00000003 -/* MIPS ISA 4 instruction (R8000). */ -#define INSN_ISA4 0x00000004 -#define INSN_ISA5 0x00000005 - -/* Chip specific instructions. These are bitmasks. */ -/* MIPS R4650 instruction. */ -#define INSN_4650 0x00000010 -/* LSI R4010 instruction. */ -#define INSN_4010 0x00000020 -/* NEC VR4100 instruction. */ -#define INSN_4100 0x00000040 -/* Toshiba R3900 instruction. */ -#define INSN_3900 0x00000080 - -/* 32-bit code running on a ISA3+ CPU. */ -#define INSN_GP32 0x00001000 - -/* Test for membership in an ISA including chip specific ISAs. - INSN is pointer to an element of the opcode table; ISA is the - specified ISA to test against; and CPU is the CPU specific ISA - to test, or zero if no CPU specific ISA test is desired. - The gp32 arg is set when you need to force 32-bit register usage on - a machine with 64-bit registers; see the documentation under -mgp32 - in the MIPS gas docs. */ - -#define OPCODE_IS_MEMBER(insn,isa,cpu,gp32) \ - ((((insn)->membership & INSN_ISA) != 0 \ - && ((insn)->membership & INSN_ISA) <= isa \ - && ((insn)->membership & INSN_GP32 ? gp32 : 1)) \ - || (cpu == 4650 \ - && ((insn)->membership & INSN_4650) != 0) \ - || (cpu == 4010 \ - && ((insn)->membership & INSN_4010) != 0) \ - || ((cpu == 4100 \ - || cpu == 4111 \ - ) \ - && ((insn)->membership & INSN_4100) != 0) \ - || (cpu == 3900 \ - && ((insn)->membership & INSN_3900) != 0)) - -/* This is a list of macro expanded instructions. - * - * _I appended means immediate - * _A appended means address - * _AB appended means address with base register - * _D appended means 64 bit floating point constant - * _S appended means 32 bit floating point constant - */ -enum { - M_ABS, - M_ADD_I, - M_ADDU_I, - M_AND_I, - M_BEQ, - M_BEQ_I, - M_BEQL_I, - M_BGE, - M_BGEL, - M_BGE_I, - M_BGEL_I, - M_BGEU, - M_BGEUL, - M_BGEU_I, - M_BGEUL_I, - M_BGT, - M_BGTL, - M_BGT_I, - M_BGTL_I, - M_BGTU, - M_BGTUL, - M_BGTU_I, - M_BGTUL_I, - M_BLE, - M_BLEL, - M_BLE_I, - M_BLEL_I, - M_BLEU, - M_BLEUL, - M_BLEU_I, - M_BLEUL_I, - M_BLT, - M_BLTL, - M_BLT_I, - M_BLTL_I, - M_BLTU, - M_BLTUL, - M_BLTU_I, - M_BLTUL_I, - M_BNE, - M_BNE_I, - M_BNEL_I, - M_DABS, - M_DADD_I, - M_DADDU_I, - M_DDIV_3, - M_DDIV_3I, - M_DDIVU_3, - M_DDIVU_3I, - M_DIV_3, - M_DIV_3I, - M_DIVU_3, - M_DIVU_3I, - M_DLA_AB, - M_DLI, - M_DMUL, - M_DMUL_I, - M_DMULO, - M_DMULO_I, - M_DMULOU, - M_DMULOU_I, - M_DREM_3, - M_DREM_3I, - M_DREMU_3, - M_DREMU_3I, - M_DSUB_I, - M_DSUBU_I, - M_DSUBU_I_2, - M_J_A, - M_JAL_1, - M_JAL_2, - M_JAL_A, - M_L_DOB, - M_L_DAB, - M_LA_AB, - M_LB_A, - M_LB_AB, - M_LBU_A, - M_LBU_AB, - M_LD_A, - M_LD_OB, - M_LD_AB, - M_LDC1_AB, - M_LDC2_AB, - M_LDC3_AB, - M_LDL_AB, - M_LDR_AB, - M_LH_A, - M_LH_AB, - M_LHU_A, - M_LHU_AB, - M_LI, - M_LI_D, - M_LI_DD, - M_LI_S, - M_LI_SS, - M_LL_AB, - M_LLD_AB, - M_LS_A, - M_LW_A, - M_LW_AB, - M_LWC0_A, - M_LWC0_AB, - M_LWC1_A, - M_LWC1_AB, - M_LWC2_A, - M_LWC2_AB, - M_LWC3_A, - M_LWC3_AB, - M_LWL_A, - M_LWL_AB, - M_LWR_A, - M_LWR_AB, - M_LWU_AB, - M_MUL, - M_MUL_I, - M_MULO, - M_MULO_I, - M_MULOU, - M_MULOU_I, - M_NOR_I, - M_OR_I, - M_REM_3, - M_REM_3I, - M_REMU_3, - M_REMU_3I, - M_ROL, - M_ROL_I, - M_ROR, - M_ROR_I, - M_S_DA, - M_S_DOB, - M_S_DAB, - M_S_S, - M_SC_AB, - M_SCD_AB, - M_SD_A, - M_SD_OB, - M_SD_AB, - M_SDC1_AB, - M_SDC2_AB, - M_SDC3_AB, - M_SDL_AB, - M_SDR_AB, - M_SEQ, - M_SEQ_I, - M_SGE, - M_SGE_I, - M_SGEU, - M_SGEU_I, - M_SGT, - M_SGT_I, - M_SGTU, - M_SGTU_I, - M_SLE, - M_SLE_I, - M_SLEU, - M_SLEU_I, - M_SLT_I, - M_SLTU_I, - M_SNE, - M_SNE_I, - M_SB_A, - M_SB_AB, - M_SH_A, - M_SH_AB, - M_SW_A, - M_SW_AB, - M_SWC0_A, - M_SWC0_AB, - M_SWC1_A, - M_SWC1_AB, - M_SWC2_A, - M_SWC2_AB, - M_SWC3_A, - M_SWC3_AB, - M_SWL_A, - M_SWL_AB, - M_SWR_A, - M_SWR_AB, - M_SUB_I, - M_SUBU_I, - M_SUBU_I_2, - M_TEQ_I, - M_TGE_I, - M_TGEU_I, - M_TLT_I, - M_TLTU_I, - M_TNE_I, - M_TRUNCWD, - M_TRUNCWS, - M_ULD, - M_ULD_A, - M_ULH, - M_ULH_A, - M_ULHU, - M_ULHU_A, - M_ULW, - M_ULW_A, - M_USH, - M_USH_A, - M_USW, - M_USW_A, - M_USD, - M_USD_A, - M_XOR_I, - M_COP0, - M_COP1, - M_COP2, - M_COP3, - M_NUM_MACROS -}; - - -/* The order of overloaded instructions matters. Label arguments and - register arguments look the same. Instructions that can have either - for arguments must apear in the correct order in this table for the - assembler to pick the right one. In other words, entries with - immediate operands must apear after the same instruction with - registers. - - Many instructions are short hand for other instructions (i.e., The - jal <register> instruction is short for jalr <register>). */ - -extern const struct mips_opcode mips_builtin_opcodes[]; -extern const int bfd_mips_num_builtin_opcodes; -extern struct mips_opcode *mips_opcodes; -extern int bfd_mips_num_opcodes; -#define NUMOPCODES bfd_mips_num_opcodes - - -/* The rest of this file adds definitions for the mips16 TinyRISC - processor. */ - -/* These are the bitmasks and shift counts used for the different - fields in the instruction formats. Other than OP, no masks are - provided for the fixed portions of an instruction, since they are - not needed. - - The I format uses IMM11. - - The RI format uses RX and IMM8. - - The RR format uses RX, and RY. - - The RRI format uses RX, RY, and IMM5. - - The RRR format uses RX, RY, and RZ. - - The RRI_A format uses RX, RY, and IMM4. - - The SHIFT format uses RX, RY, and SHAMT. - - The I8 format uses IMM8. - - The I8_MOVR32 format uses RY and REGR32. - - The IR_MOV32R format uses REG32R and MOV32Z. - - The I64 format uses IMM8. - - The RI64 format uses RY and IMM5. - */ - -#define MIPS16OP_MASK_OP 0x1f -#define MIPS16OP_SH_OP 11 -#define MIPS16OP_MASK_IMM11 0x7ff -#define MIPS16OP_SH_IMM11 0 -#define MIPS16OP_MASK_RX 0x7 -#define MIPS16OP_SH_RX 8 -#define MIPS16OP_MASK_IMM8 0xff -#define MIPS16OP_SH_IMM8 0 -#define MIPS16OP_MASK_RY 0x7 -#define MIPS16OP_SH_RY 5 -#define MIPS16OP_MASK_IMM5 0x1f -#define MIPS16OP_SH_IMM5 0 -#define MIPS16OP_MASK_RZ 0x7 -#define MIPS16OP_SH_RZ 2 -#define MIPS16OP_MASK_IMM4 0xf -#define MIPS16OP_SH_IMM4 0 -#define MIPS16OP_MASK_REGR32 0x1f -#define MIPS16OP_SH_REGR32 0 -#define MIPS16OP_MASK_REG32R 0x1f -#define MIPS16OP_SH_REG32R 3 -#define MIPS16OP_EXTRACT_REG32R(i) ((((i) >> 5) & 7) | ((i) & 0x18)) -#define MIPS16OP_MASK_MOVE32Z 0x7 -#define MIPS16OP_SH_MOVE32Z 0 -#define MIPS16OP_MASK_IMM6 0x3f -#define MIPS16OP_SH_IMM6 5 - -/* These are the characters which may appears in the args field of an - instruction. They appear in the order in which the fields appear - when the instruction is used. Commas and parentheses in the args - string are ignored when assembling, and written into the output - when disassembling. - - "y" 3 bit register (MIPS16OP_*_RY) - "x" 3 bit register (MIPS16OP_*_RX) - "z" 3 bit register (MIPS16OP_*_RZ) - "Z" 3 bit register (MIPS16OP_*_MOVE32Z) - "v" 3 bit same register as source and destination (MIPS16OP_*_RX) - "w" 3 bit same register as source and destination (MIPS16OP_*_RY) - "0" zero register ($0) - "S" stack pointer ($sp or $29) - "P" program counter - "R" return address register ($ra or $31) - "X" 5 bit MIPS register (MIPS16OP_*_REGR32) - "Y" 5 bit MIPS register (MIPS16OP_*_REG32R) - "6" 6 bit unsigned break code (MIPS16OP_*_IMM6) - "a" 26 bit jump address - "e" 11 bit extension value - "l" register list for entry instruction - "L" register list for exit instruction - - The remaining codes may be extended. Except as otherwise noted, - the full extended operand is a 16 bit signed value. - "<" 3 bit unsigned shift count * 0 (MIPS16OP_*_RZ) (full 5 bit unsigned) - ">" 3 bit unsigned shift count * 0 (MIPS16OP_*_RX) (full 5 bit unsigned) - "[" 3 bit unsigned shift count * 0 (MIPS16OP_*_RZ) (full 6 bit unsigned) - "]" 3 bit unsigned shift count * 0 (MIPS16OP_*_RX) (full 6 bit unsigned) - "4" 4 bit signed immediate * 0 (MIPS16OP_*_IMM4) (full 15 bit signed) - "5" 5 bit unsigned immediate * 0 (MIPS16OP_*_IMM5) - "H" 5 bit unsigned immediate * 2 (MIPS16OP_*_IMM5) - "W" 5 bit unsigned immediate * 4 (MIPS16OP_*_IMM5) - "D" 5 bit unsigned immediate * 8 (MIPS16OP_*_IMM5) - "j" 5 bit signed immediate * 0 (MIPS16OP_*_IMM5) - "8" 8 bit unsigned immediate * 0 (MIPS16OP_*_IMM8) - "V" 8 bit unsigned immediate * 4 (MIPS16OP_*_IMM8) - "C" 8 bit unsigned immediate * 8 (MIPS16OP_*_IMM8) - "U" 8 bit unsigned immediate * 0 (MIPS16OP_*_IMM8) (full 16 bit unsigned) - "k" 8 bit signed immediate * 0 (MIPS16OP_*_IMM8) - "K" 8 bit signed immediate * 8 (MIPS16OP_*_IMM8) - "p" 8 bit conditional branch address (MIPS16OP_*_IMM8) - "q" 11 bit branch address (MIPS16OP_*_IMM11) - "A" 8 bit PC relative address * 4 (MIPS16OP_*_IMM8) - "B" 5 bit PC relative address * 8 (MIPS16OP_*_IMM5) - "E" 5 bit PC relative address * 4 (MIPS16OP_*_IMM5) - */ - -/* For the mips16, we use the same opcode table format and a few of - the same flags. However, most of the flags are different. */ - -/* Modifies the register in MIPS16OP_*_RX. */ -#define MIPS16_INSN_WRITE_X 0x00000001 -/* Modifies the register in MIPS16OP_*_RY. */ -#define MIPS16_INSN_WRITE_Y 0x00000002 -/* Modifies the register in MIPS16OP_*_RZ. */ -#define MIPS16_INSN_WRITE_Z 0x00000004 -/* Modifies the T ($24) register. */ -#define MIPS16_INSN_WRITE_T 0x00000008 -/* Modifies the SP ($29) register. */ -#define MIPS16_INSN_WRITE_SP 0x00000010 -/* Modifies the RA ($31) register. */ -#define MIPS16_INSN_WRITE_31 0x00000020 -/* Modifies the general purpose register in MIPS16OP_*_REG32R. */ -#define MIPS16_INSN_WRITE_GPR_Y 0x00000040 -/* Reads the register in MIPS16OP_*_RX. */ -#define MIPS16_INSN_READ_X 0x00000080 -/* Reads the register in MIPS16OP_*_RY. */ -#define MIPS16_INSN_READ_Y 0x00000100 -/* Reads the register in MIPS16OP_*_MOVE32Z. */ -#define MIPS16_INSN_READ_Z 0x00000200 -/* Reads the T ($24) register. */ -#define MIPS16_INSN_READ_T 0x00000400 -/* Reads the SP ($29) register. */ -#define MIPS16_INSN_READ_SP 0x00000800 -/* Reads the RA ($31) register. */ -#define MIPS16_INSN_READ_31 0x00001000 -/* Reads the program counter. */ -#define MIPS16_INSN_READ_PC 0x00002000 -/* Reads the general purpose register in MIPS16OP_*_REGR32. */ -#define MIPS16_INSN_READ_GPR_X 0x00004000 -/* Is a branch insn. */ -#define MIPS16_INSN_BRANCH 0x00010000 - -/* The following flags have the same value for the mips16 opcode - table: - INSN_UNCOND_BRANCH_DELAY - INSN_COND_BRANCH_DELAY - INSN_COND_BRANCH_LIKELY (never used) - INSN_READ_HI - INSN_READ_LO - INSN_WRITE_HI - INSN_WRITE_LO - INSN_TRAP - INSN_ISA3 - */ - -extern const struct mips_opcode mips16_opcodes[]; -extern const int bfd_mips16_num_opcodes; - -#endif /* _MIPS_H_ */ |