diff options
Diffstat (limited to 'libgloss/bfin/include/defBF59x_base.h')
| -rw-r--r-- | libgloss/bfin/include/defBF59x_base.h | 1111 |
1 files changed, 0 insertions, 1111 deletions
diff --git a/libgloss/bfin/include/defBF59x_base.h b/libgloss/bfin/include/defBF59x_base.h deleted file mode 100644 index 4e419f40a..000000000 --- a/libgloss/bfin/include/defBF59x_base.h +++ /dev/null @@ -1,1111 +0,0 @@ -/* - * The authors hereby grant permission to use, copy, modify, distribute, - * and license this software and its documentation for any purpose, provided - * that existing copyright notices are retained in all copies and that this - * notice is included verbatim in any distributions. No written agreement, - * license, or royalty fee is required for any of the authorized uses. - * Modifications to this software may be copyrighted by their authors - * and need not follow the licensing terms described here, provided that - * the new terms are clearly indicated on the first page of each file where - * they apply. - */ - -/* -** defBF59x_base.h -** -** Copyright (C) 2009-2010 Analog Devices Inc., All Rights Reserved. -** -************************************************************************************ -** -** This include file contains a list of macro "defines" to enable the programmer -** to use symbolic names for the registers common to the ADSP-BF59x peripherals. -** -************************************************************************************ -** System MMR Register Map -************************************************************************************/ - -#ifndef _DEF_BF59x_H -#define _DEF_BF59x_H - -#ifdef _MISRA_RULES -#pragma diag(push) -#pragma diag(suppress:misra_rule_19_4) -#pragma diag(suppress:misra_rule_19_7) -#include <stdint.h> -#endif /* _MISRA_RULES */ - - -/* ************************************************************************************************************** */ -/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF59x */ -/* ************************************************************************************************************** */ - -/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ -#define PLL_CTL 0xFFC00000 /* PLL Control Register */ -#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ -#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ -#define PLL_STAT 0xFFC0000C /* PLL Status Register */ -#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ -#define CHIPID 0xFFC00014 /* Device ID Register */ -#define AUX_REVID 0xFFC00108 /* Auxiliary Revision ID Register */ - -/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ -#define SWRST 0xFFC00100 /* Software Reset Register */ -#define SYSCR 0xFFC00104 /* System Configuration Register */ - -#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ -/* legacy register name (below) provided for backwards code compatibility */ -#define SIC_IMASK SIC_IMASK0 -#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ -#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ -#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ -#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ -#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ -/* legacy register name (below) provided for backwards code compatibility */ -#define SIC_ISR SIC_ISR0 -#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ -/* legacy register name (below) provided for backwards code compatibility */ -#define SIC_IWR SIC_IWR0 - -/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ -#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ -#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ -#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ - -/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ -#define UART0_THR 0xFFC00400 /* Transmit Holding register */ -#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART0_LCR 0xFFC0040C /* Line Control Register */ -#define UART0_MCR 0xFFC00410 /* Modem Control Register */ -#define UART0_LSR 0xFFC00414 /* Line Status Register */ -#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART0_GCTL 0xFFC00424 /* Global Control Register */ - - -/* SPI0 Controller (0xFFC00500 - 0xFFC005FF) */ -#define SPI0_CTL 0xFFC00500 /* SPI0 Control Register */ -#define SPI0_FLG 0xFFC00504 /* SPI0 Flag register */ -#define SPI0_STAT 0xFFC00508 /* SPI0 Status register */ -#define SPI0_TDBR 0xFFC0050C /* SPI0 Transmit Data Buffer Register */ -#define SPI0_RDBR 0xFFC00510 /* SPI0 Receive Data Buffer Register */ -#define SPI0_BAUD 0xFFC00514 /* SPI0 Baud rate Register */ -#define SPI0_SHADOW 0xFFC00518 /* SPI0_RDBR Shadow Register */ - -/* SPI1 Controller (0xFFC01300 - 0xFFC013FF) */ -#define SPI1_CTL 0xFFC01300 /* SPI1 Control Register */ -#define SPI1_FLG 0xFFC01304 /* SPI1 Flag register */ -#define SPI1_STAT 0xFFC01308 /* SPI1 Status register */ -#define SPI1_TDBR 0xFFC0130C /* SPI1 Transmit Data Buffer Register */ -#define SPI1_RDBR 0xFFC01310 /* SPI1 Receive Data Buffer Register */ -#define SPI1_BAUD 0xFFC01314 /* SPI1 Baud rate Register */ -#define SPI1_SHADOW 0xFFC01318 /* SPI1_RDBR Shadow Register */ - - -/* TIMER0-2 Registers (0xFFC00600 - 0xFFC006FF) */ -#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ -#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ -#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ -#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ - -#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ -#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ -#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ -#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ - -#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ -#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ -#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ -#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ - -#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ -#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ -#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ - - -/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ -#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ -#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ -#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ -#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ -#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ -#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ -#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ -#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ -#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ -#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ -#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ -#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ -#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ -#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ -#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ -#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ -#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ - -/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ -#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ -#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ -#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ -#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ -#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ -#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ -#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ -#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ -#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ -#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ -#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ -#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ -#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ -#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ -#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ -#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ -#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ - - -/* Pin Control Registers (0xFFC01100 - 0xFFC01208) */ -#define PORTF_FER 0xFFC01100 /* Port F Function Enable Register (Alternate/Flag*) */ -#define PORTF_MUX 0xFFC01104 /* Port F mux control */ -#define PORTF_PADCTL 0xFFC01108 /* Port F pad control */ -#define PORTG_FER 0xFFC01200 /* Port G Function Enable Register (Alternate/Flag*) */ -#define PORTG_MUX 0xFFC01204 /* Port G mux control */ -#define PORTG_PADCTL 0xFFC01208 /* Port G pad control */ - -/* SPORT Clock Gating (0xFFC0120C) */ -#define SPORT_GATECLK 0xFFC0120C /* SPORT Clock Gating Control Register */ - - -/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ -#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ -#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ -#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ -#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ -#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ -#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ -#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ -#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ -#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ -#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ -#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ -#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ -#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ -#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ -#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ -#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ -#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ -#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ - - -/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ -#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ -#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ -#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ -#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ -#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ -#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ -#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ -#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ -#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ -#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ -#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ -#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ -#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ -#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ -#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ -#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ -#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ -#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ -#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ -#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ -#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ -#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ - -/* DMA Traffic Control Registers (0xFFC00B00 - 0xFFC00BFF) */ -#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ - -/* Alternate deprecated register names (below) provided for backwards code compatibility */ -#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ - -/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ -#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ -#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ -#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ -#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ -#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ -#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ -#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ -#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ -#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ -#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ -#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ -#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ -#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ - -#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ -#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ -#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ -#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ -#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ -#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ -#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ -#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ -#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ -#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ -#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ -#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ -#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ - -#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ -#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ -#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ -#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ -#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ -#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ -#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ -#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ -#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ -#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ -#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ -#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ -#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ - -#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ -#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ -#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ -#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ -#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ -#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ -#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ -#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ -#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ -#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ -#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ -#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ -#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ - -#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ -#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ -#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ -#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ -#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ -#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ -#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ -#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ -#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ -#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ -#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ -#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ -#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ - -#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ -#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ -#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ -#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ -#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ -#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ -#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ -#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ -#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ -#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ -#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ -#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ -#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ - -#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ -#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ -#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ -#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ -#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ -#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ -#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ -#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ -#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ -#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ -#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ -#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ -#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ - -#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ -#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ -#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ -#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ -#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ -#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ -#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ -#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ -#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ -#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ -#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ -#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ -#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ - -#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ -#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ -#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ -#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ -#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ -#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ -#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ -#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ -#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ -#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ -#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ -#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ -#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ - -#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ -#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ -#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ -#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ -#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ -#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ -#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ -#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register*/ -#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ -#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ -#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ -#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ -#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ - -#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ -#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ -#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ -#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ -#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ -#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ -#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ -#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ -#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ -#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ -#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ -#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ -#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ - -#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ -#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ -#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ -#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ -#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ -#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ -#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ -#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register*/ -#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ -#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ -#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ -#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ -#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ - -#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ -#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ -#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ -#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ -#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ -#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ -#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ -#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ -#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ -#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ -#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ -#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ -#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ - - -/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ -#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ -#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ -#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ -#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ -#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ - - -/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ -#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ -#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ -#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ -#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ -#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ -#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ -#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ -#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ -#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ -#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ -#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ -#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ -#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ -#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ -#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ - - -/****************************************************************************************************************** -** System MMR Register Bits And Macros -** -** Disclaimer: All macros are intended to make C and Assembly code more readable. -** Use these macros carefully, as any that do left shifts for field -** depositing will result in the lower order bits being destroyed. Any -** macro that shifts left to properly position the bit-field should be -** used as part of an OR to initialize a register and NOT as a dynamic -** modifier UNLESS the lower order bits are saved and ORed back in when -** the macro is used. -*******************************************************************************************************************/ - -/************************************** PLL AND RESET MASKS *******************************************************/ - -/* PLL_CTL Masks */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* PLL Not Powered */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Enter Deep Sleep Mode */ -#define BYPASS 0x0100 /* Bypass the PLL */ -#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ - -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#ifdef _MISRA_RULES -#define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ -#else -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ -#endif /* _MISRA_RULES */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ -#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ -#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ -#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ -#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ - -/* PLL_DIV Macros */ -#ifdef _MISRA_RULES -#define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ -#else -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ -#endif /* _MISRA_RULES */ - -/* VR_CTL Masks */ -#define WAKE_EN0 0x0100 /* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN0 signal */ -#define WAKE_EN1 0x0200 /* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN1 signal */ -#define WAKE_EN2 0x0400 /* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN2 signal */ -#define WAKE_EN3 0x0800 /* Enable Wakeup From Hibernate/Deep Sleep on the WAKEN3 signal */ -#define HIBERNATEB 0x1000 /* Bit mask for HIBERNATEB */ -#define HIBERNATE 0x0000 /* Deasserts EXT_WAKE in order to enter hibernate mode */ -#define EXTCLK_SEL 0x2000 /* Selects SCLK for the EXTCLK signal */ -#define EXTCLK_OE 0x4000 /* Output enable for the EXTCLK signal */ -#define WAKE_POLARITY 0x8000 /* Make wakeups active-high */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - -/* SWRST Masks */ -#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ -#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ -#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ -#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ -#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ - -/* SYSCR Masks */ -#define BMODE_IDLE 0x0000 /* Bypass boot ROM, go to idle */ -#define BMODE_SPI1MEM 0x0002 /* Boot from serial SPI1 memory */ -#define BMODE_SPI1HOST 0x0003 /* Boot from SPI1 host (slave mode) */ -#define BMODE_SPI0MEM 0x0004 /* Boot from serial SPI0 memory */ -#define BMODE_PPI 0x0005 /* Boot from PPI Port */ -#define BMODE_L1ROM 0x0006 /* Boot from internal L1 ROM */ -#define BMODE_UART0HOST 0x0007 /* Boot from UART0 host */ -#define BMODE 0x0007 /* Boot Mode. Mirror of BMODE Mode Pins */ - -#define BCODE 0x00F0 -#define BCODE_NORMAL 0x0000 /* normal boot, update PLL/VR, quickboot as by WURESET */ -#define BCODE_NOBOOT 0x0010 /* bypass boot, don't update PLL/VR */ -#define BCODE_QUICKBOOT 0x0020 /* quick boot, overrule WURESET, don't update PLL/VR */ -#define BCODE_ALLBOOT 0x0040 /* no quick boot, overrule WURESET, don't update PLL/VR */ -#define BCODE_FULLBOOT 0x0060 /* no quick boot, overrule WURESET, update PLL/VR */ - -#define WURESET 0x1000 /* wakeup event since last hardware reset */ -#define DFRESET 0x2000 /* recent reset was due to a double fault event */ -#define WDRESET 0x4000 /* recent reset was due to a watchdog event */ -#define SWRESET 0x8000 /* recent reset was issued by software */ - -/********************************* SYSTEM INTERRUPT CONTROLLER MASKS *********************************************/ -/* Peripheral Masks For SIC_ISR0, SIC_IWR0, SIC_IMASK0 */ -#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ -#define IRQ_DMA_ERR0 0x00000002 /* Error Interrupt (DMA error 0 interrupt (generic)) */ -#define IRQ_PPI_ERR 0x00000004 /* Error Interrupt (PPI error interrupt) */ -#define IRQ_SPORT0_ERR 0x00000008 /* Error Interrupt (SPORT0 status interrupt) */ -#define IRQ_SPORT1_ERR 0x00000010 /* Error Interrupt (SPORT1 status interrupt) */ -#define IRQ_SPI0_ERR 0x00000020 /* Error Interrupt (SPI0 status interrupt) */ -#define IRQ_SPI1_ERR 0x00000040 /* Error Interrupt (SPI1 status interrupt) */ -#define IRQ_UART0_ERR 0x00000080 /* Error Interrupt (UART0 status interrupt) */ -#define IRQ_DMA0 0x00000100 /* DMA channel 0 (PPI) Interrupt */ -#define IRQ_DMA1 0x00000200 /* DMA Channel 1 (SPORT0 RX) Interrupt */ -#define IRQ_DMA2 0x00000400 /* DMA Channel 2 (SPORT0 TX) Interrupt */ -#define IRQ_DMA3 0x00000800 /* DMA Channel 3 (SPORT1 RX) Interrupt */ -#define IRQ_DMA4 0x00001000 /* DMA Channel 4 (SPORT1 TX) Interrupt */ -#define IRQ_DMA5 0x00002000 /* DMA Channel 5 (SPI0) Interrupt */ -#define IRQ_DMA6 0x00004000 /* DMA Channel 6 (SPI1) Interrupt */ -#define IRQ_DMA7 0x00008000 /* DMA Channel 7 (UART0 RX) Interrupt */ -#define IRQ_DMA8 0x00010000 /* DMA Channel 8 (UART0 TX) Interrupt */ -#define IRQ_PFA_PORTF 0x00020000 /* PF Port F Interrupt A */ -#define IRQ_PFB_PORTF 0x00040000 /* PF Port F Interrupt B */ -#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ -#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ -#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ -#define IRQ_PFA_PORTG 0x00400000 /* PF Port G Interrupt A */ -#define IRQ_PFB_PORTG 0x00800000 /* PF Port G Interrupt B */ -#define IRQ_TWI 0x01000000 /* TWI Interrupt */ -#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA0 Destination) TX Interrupt */ -#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA0 Source) RX Interrupt */ -#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA1 Destination) TX Interrupt */ -#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA1 Source) RX Interrupt */ -#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ - -/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ -#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ -#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ -/* x = pos 0 to 31, for 32-63 use value-32 */ -#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ -#define IWR_DISABLE(x) (0xFFFFFFFF^(1<<(x))) /* Wakeup Disable Peripheral #x */ - - -#ifdef _MISRA_RULES -#define _MF15 0xFu -#define _MF7 7u -#else -#define _MF15 0xF -#define _MF7 7 -#endif /* _MISRA_RULES */ - - -/* SIC_IAR0 Macros*/ -#define P0_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #0 assigned IVG #x */ -#define P1_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #1 assigned IVG #x */ -#define P2_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #2 assigned IVG #x */ -#define P3_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #3 assigned IVG #x */ -#define P4_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #4 assigned IVG #x */ -#define P5_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #5 assigned IVG #x */ -#define P6_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #6 assigned IVG #x */ -#define P7_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #7 assigned IVG #x */ - -/* SIC_IAR1 Macros*/ -#define P8_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #8 assigned IVG #x */ -#define P9_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #9 assigned IVG #x */ -#define P10_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #10 assigned IVG #x */ -#define P11_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #11 assigned IVG #x */ -#define P12_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #12 assigned IVG #x */ -#define P13_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #13 assigned IVG #x */ -#define P14_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #14 assigned IVG #x */ -#define P15_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #15 assigned IVG #x */ - -/* SIC_IAR2 Macros*/ -#define P16_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #16 assigned IVG #x */ -#define P17_IVG(x) (((x)&_MF15)-_MF7) << 0x4 /* Peripheral #17 assigned IVG #x */ -#define P18_IVG(x) (((x)&_MF15)-_MF7) << 0x8 /* Peripheral #18 assigned IVG #x */ -#define P19_IVG(x) (((x)&_MF15)-_MF7) << 0xC /* Peripheral #19 assigned IVG #x */ -#define P20_IVG(x) (((x)&_MF15)-_MF7) << 0x10 /* Peripheral #20 assigned IVG #x */ -#define P21_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #21 assigned IVG #x */ -#define P22_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #22 assigned IVG #x */ -#define P23_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #23 assigned IVG #x */ - -/* SIC_IAR3 Macros*/ -#define P24_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #24 assigned IVG #x */ -#define P29_IVG(x) (((x)&_MF15)-_MF7) << 0x14 /* Peripheral #29 assigned IVG #x */ -#define P30_IVG(x) (((x)&_MF15)-_MF7) << 0x18 /* Peripheral #30 assigned IVG #x */ -#define P31_IVG(x) (((x)&_MF15)-_MF7) << 0x1C /* Peripheral #31 assigned IVG #x */ - - -/* SIC_IMASK0 Masks*/ -#define SIC_UNMASK0_ALL 0x00000000 /* Unmask all peripheral interrupts */ -#define SIC_MASK0_ALL 0xE1FFFFFF /* Mask all peripheral interrupts */ - -/* SIC_IWR0 Masks*/ -#define IWR0_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ -#define IWR0_ENABLE_ALL 0xE1FFFFFF /* Wakeup Enable all peripherals */ - - -/* ************************************** WATCHDOG TIMER MASKS ****************************************************/ - -/* Watchdog Timer WDOG_CTL Register Masks */ -#ifdef _MISRA_RULES -#define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */ -#else -#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ -#endif /* _MISRA_RULES */ - -#define WDEV_RESET 0x0000 /* generate reset event on roll over */ -#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ -#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ -#define WDEV_NONE 0x0006 /* no event on roll over */ -#define WDEN 0x0FF0 /* enable watchdog */ -#define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ - -/* depreciated WDOG_CTL Register Masks for legacy code */ -#define ICTL WDEV -#define ENABLE_RESET WDEV_RESET -#define WDOG_RESET WDEV_RESET -#define ENABLE_NMI WDEV_NMI -#define WDOG_NMI WDEV_NMI -#define ENABLE_GPI WDEV_GPI -#define WDOG_GPI WDEV_GPI -#define DISABLE_EVT WDEV_NONE -#define WDOG_NONE WDEV_NONE - -#define TMR_EN WDEN -#define TMR_DIS WDDIS -#define TRO WDRO -#define ICTL_P0 0x01 -#define ICTL_P1 0x02 -#define TRO_P 0x0F - - -/* ************************************ UART CONTROLLER MASKS *****************************************************/ - -/* UARTx_LCR Masks*/ -#ifdef _MISRA_RULES -#define WLS(x) (((x)-5u) & 0x03u) /* Word Length Select */ -#else -#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ -#endif /* _MISRA_RULES */ - -#define STB 0x04 /* Stop Bits */ -#define PEN 0x08 /* Parity Enable */ -#define EPS 0x10 /* Even Parity Select */ -#define STP 0x20 /* Stick Parity */ -#define SB 0x40 /* Set Break */ -#define DLAB 0x80 /* Divisor Latch Access */ - -/* UARTx_MCR Mask */ -#define LOOP_ENA 0x10 /* Loopback Mode Enable */ - -/* UARTx_LSR Masks */ -#define DR 0x01 /* Data Ready */ -#define OE 0x02 /* Overrun Error */ -#define PE 0x04 /* Parity Error */ -#define FE 0x08 /* Framing Error */ -#define BI 0x10 /* Break Interrupt */ -#define THRE 0x20 /* THR Empty */ -#define TEMT 0x40 /* TSR and UART_THR Empty */ - -/* UARTx_IER Masks*/ -#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ -#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ -#define ELSI 0x04 /* Enable RX Status Interrupt */ - -/* UARTx_IIR Masks*/ -#define NINT 0x01 /* Pending Interrupt */ -#define STATUS 0x06 /* Highest Priority Pending Interrupt */ - -/* UARTx_GCTL Masks*/ -#define UCEN 0x01 /* Enable UARTx Clocks */ -#define IREN 0x02 /* Enable IrDA Mode */ -#define TPOLC 0x04 /* IrDA TX Polarity Change */ -#define RPOLC 0x08 /* IrDA RX Polarity Change */ -#define FPE 0x10 /* Force Parity Error On Transmit */ -#define FFE 0x20 /* Force Framing Error On Transmit */ - -/* Bit masks for UART Divisor Latch Registers: UARTx_DLL & UARTx_DLH */ -#define UARTDLL 0x00FF /* Divisor Latch Low Byte */ -#define UARTDLH 0xFF00 /* Divisor Latch High Byte */ - - -/******************************** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ***************************************/ - -/* SPIx_CTL Masks*/ -#define TIMOD 0x0003 /* Transfer Initiate Mode */ -#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ -#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ -#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ -#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ -#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ -#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ -#define PSSE 0x0010 /* Slave-Select Input Enable */ -#define EMISO 0x0020 /* Enable MISO As Output */ -#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ -#define LSBF 0x0200 /* LSB First */ -#define CPHA 0x0400 /* Clock Phase */ -#define CPOL 0x0800 /* Clock Polarity */ -#define MSTR 0x1000 /* Master/Slave* */ -#define WOM 0x2000 /* Write Open Drain Master */ -#define SPE 0x4000 /* SPI Enable */ - -/* SPIx_FLG Masks*/ -#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ -#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ -#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ -#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ -#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ -#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ -#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ -#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ -#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ -#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ -#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ -#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ -#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ -#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ - -/* SPIx_STAT Masks*/ -#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ -#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ -#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ -#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ -#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ -#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ -#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ - - -/*********************************** GENERAL PURPOSE TIMER MASKS ************************************************/ -/* TIMER_ENABLE Masks*/ -#define TIMEN0 0x0001 /* Enable Timer 0 */ -#define TIMEN1 0x0002 /* Enable Timer 1 */ -#define TIMEN2 0x0004 /* Enable Timer 2 */ - -/* TIMER_DISABLE Masks*/ -#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ -#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ -#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ - -/* TIMER_STATUS Masks*/ -#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ -#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ -#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ -#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ -#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ -#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ -#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ -#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ -#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ - -/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ -#define TOVL_ERR0 TOVF_ERR0 -#define TOVL_ERR1 TOVF_ERR1 -#define TOVL_ERR2 TOVF_ERR2 - -/* TIMERx_CONFIG Masks */ -#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ -#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ -#define EXT_CLK 0x0003 /* External Clock Mode */ -#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ -#define PERIOD_CNT 0x0008 /* Period Count */ -#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ -#define TIN_SEL 0x0020 /* Timer Input Select */ -#define OUT_DIS 0x0040 /* Output Pad Disable */ -#define CLK_SEL 0x0080 /* Timer Clock Select */ -#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ -#define EMU_RUN 0x0200 /* Emulation Behavior Select */ -#define ERR_TYP 0xC000 /* Error Type */ - - -/* ************************************* GPIO PORTS F, G MASKS **********************************************/ - -/* General Purpose IO Masks */ -/* Port F Masks */ -#define PF0 0x0001 -#define PF1 0x0002 -#define PF2 0x0004 -#define PF3 0x0008 -#define PF4 0x0010 -#define PF5 0x0020 -#define PF6 0x0040 -#define PF7 0x0080 -#define PF8 0x0100 -#define PF9 0x0200 -#define PF10 0x0400 -#define PF11 0x0800 -#define PF12 0x1000 -#define PF13 0x2000 -#define PF14 0x4000 -#define PF15 0x8000 - -/* Port G Masks */ -#define PG0 0x0001 -#define PG1 0x0002 -#define PG2 0x0004 -#define PG3 0x0008 -#define PG4 0x0010 -#define PG5 0x0020 -#define PG6 0x0040 -#define PG7 0x0080 -#define PG8 0x0100 -#define PG9 0x0200 -#define PG10 0x0400 -#define PG11 0x0800 -#define PG12 0x1000 -#define PG13 0x2000 -#define PG14 0x4000 -#define PG15 0x8000 - -/* ************************************** SERIAL PORT MASKS *****************************************************/ -/* SPORT_GATECLK Masks */ -#define SPORT0_GATECLK_EN 0x0001 /* SPORT0 Clock Gating Enable */ -#define SPORT0_GATECLK_MODE 0x0002 /* SPORT0 Clock Gating Mode */ -#define SPORT0_GATECLK_STATE 0x0004 /* SPORT0 Clock Gating State */ -#define SPORT1_GATECLK_EN 0x0010 /* SPORT1 Clock Gating Enable */ -#define SPORT1_GATECLK_MODE 0x0020 /* SPORT1 Clock Gating Mode */ -#define SPORT1_GATECLK_STATE 0x0040 /* SPORT1 Clock Gating State */ - -/* SPORTx_TCR1 Masks */ -#define TSPEN 0x0001 /* Transmit Enable */ -#define ITCLK 0x0002 /* Internal Transmit Clock Select */ -#define DTYPE_NORM 0x0004 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define TLSBIT 0x0010 /* Transmit Bit Order */ -#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ -#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ -#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ -#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ -#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ -#define TCKFE 0x4000 /* Clock Falling Edge Select */ - -/* SPORTx_TCR2 Masks and Macro */ -#ifdef _MISRA_RULES -#define SLEN(x) ((x)&0x1Fu) /* SPORT TX Word Length (2 - 31) */ -#else -#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ -#endif /* _MISRA_RULES */ - -#define TXSE 0x0100 /* TX Secondary Enable */ -#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ -#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ - -/* SPORTx_RCR1 Masks */ -#define RSPEN 0x0001 /* Receive Enable */ -#define IRCLK 0x0002 /* Internal Receive Clock Select */ -#define DTYPE_NORM 0x0004 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define RLSBIT 0x0010 /* Receive Bit Order */ -#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ -#define RFSR 0x0400 /* Receive Frame Sync Required Select */ -#define LRFS 0x1000 /* Low Receive Frame Sync Select */ -#define LARFS 0x2000 /* Late Receive Frame Sync Select */ -#define RCKFE 0x4000 /* Clock Falling Edge Select */ - -/* SPORTx_RCR2 Masks */ -#ifdef _MISRA_RULES -#define SLEN(x) ((x)&0x1Fu) /* SPORT RX Word Length (2 - 31) */ -#else -#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ -#endif /* _MISRA_RULES */ - -#define RXSE 0x0100 /* RX Secondary Enable */ -#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /* Right-First Data Order */ - -/* SPORTx_STAT Masks */ -#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ -#define RUVF 0x0002 /* Sticky Receive Underflow Status */ -#define ROVF 0x0004 /* Sticky Receive Overflow Status */ -#define TXF 0x0008 /* Transmit FIFO Full Status */ -#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ -#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ -#define TXHRE 0x0040 /* Transmit Hold Register Empty */ - -/* SPORTx_MCMC1 Macros */ -#ifdef _MISRA_RULES -#define WOFF(x) ((x) & 0x3FFu) /* Multichannel Window Offset Field */ -/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits*/ -#define WSIZE(x) (((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1 */ -#else -#define WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ -/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ -#define WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ -#endif /* _MISRA_RULES */ - -/* SPORTx_MCMC2 Masks */ -#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ -#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ -#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ -#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ -#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ -#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ -#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ -#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ -#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ -#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ -#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ -#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ -#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ -#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ -#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ -#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ -#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ -#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ -#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ -#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ -#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ -#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ - - -/**************************************** DMA CONTROLLER MASKS **************************************************/ - -/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x0001 /* DMA Channel Enable */ -#define WNR 0x0002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ -#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ -#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ -#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ -#define SYNC 0x0020 /* DMA Buffer Clear */ -#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ -#define DI_EN 0x0080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define FLOW_STOP 0x0000 /* Stop Mode */ -#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ -#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ -#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ -#define PMAP_PPI 0x0000 /* PPI Port DMA */ -#define PMAP_SPORT0RX 0x1000 /* SPORT0 Receive DMA */ -#define PMAP_SPORT0TX 0x2000 /* SPORT0 Transmit DMA */ -#define PMAP_SPORT1RX 0x3000 /* SPORT1 Receive DMA */ -#define PMAP_SPORT1TX 0x4000 /* SPORT1 Transmit DMA */ -#define PMAP_SPI0 0x5000 /* SPI0 Transmit/Receive DMA */ -#define PMAP_SPI1 0x6000 /* SPI1 Transmit/Receive DMA */ -#define PMAP_UART0RX 0x7000 /* UART0 Port Receive DMA */ -#define PMAP_UART0TX 0x8000 /* UART0 Port Transmit DMA */ - -/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ -#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ -#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ - - -/********************************* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************************************/ - -/* PPI_CONTROL Masks */ -#define PORT_EN 0x0001 /* PPI Port Enable */ -#define PORT_DIR 0x0002 /* PPI Port Direction */ -#define XFR_TYPE 0x000C /* PPI Transfer Type */ -#define PORT_CFG 0x0030 /* PPI Port Configuration */ -#define FLD_SEL 0x0040 /* PPI Active Field Select */ -#define PACK_EN 0x0080 /* PPI Packing Mode */ /* previous versions of defBF532.h erroneously included DMA32 (PPI 32-bit DMA Enable) */ -#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ -#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ -#define DLEN_8 0x0000 /* Data Length = 8 Bits */ -#define DLEN_10 0x0800 /* Data Length = 10 Bits */ -#define DLEN_11 0x1000 /* Data Length = 11 Bits */ -#define DLEN_12 0x1800 /* Data Length = 12 Bits */ -#define DLEN_13 0x2000 /* Data Length = 13 Bits */ -#define DLEN_14 0x2800 /* Data Length = 14 Bits */ -#define DLEN_15 0x3000 /* Data Length = 15 Bits */ -#define DLEN_16 0x3800 /* Data Length = 16 Bits */ -#define POLC 0x4000 /* PPI Clock Polarity */ -#define POLS 0x8000 /* PPI Frame Sync Polarity */ - -/* PPI_STATUS Masks */ -#define LT_ERR_OVR 0x0100 /* Line Track Overflow Error */ -#define LT_ERR_UNDR 0x0200 /* Line Track Underflow Error */ -#define FLD 0x0400 /* Field Indicator */ -#define FT_ERR 0x0800 /* Frame Track Error */ -#define OVR 0x1000 /* FIFO Overflow Error */ -#define UNDR 0x2000 /* FIFO Underrun Error */ -#define ERR_DET 0x4000 /* Error Detected Indicator */ -#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ - - -/*************************************** TWO-WIRE INTERFACE (TWI) MASKS *****************************************/ - -/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ -#ifdef _MISRA_RULES -#define CLKLOW(x) ((x) & 0xFFu)/* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFFu)<<0x8)/* Periods Before New Clock Low */ -#else -#define CLKLOW(x) ((x) & 0xFF)/* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ -#endif /* _MISRA_RULES */ - -/* TWI_PRESCALE Masks */ -#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ -#define TWI_ENA 0x0080 /* TWI Enable */ -#define SCCB 0x0200 /* SCCB Compatibility Enable */ - -/* TWI_SLAVE_CTRL Masks */ -#define SEN 0x0001 /* Slave Enable */ -#define SADD_LEN 0x0002 /* Slave Address Length */ -#define STDVAL 0x0004 /* Slave Transmit Data Valid */ -#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Adrress Matching Enabled */ - -/* TWI_SLAVE_STAT Masks */ -#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ -#define GCALL 0x0002 /* General Call Indicator */ - -/* TWI_MASTER_CTRL Masks */ -#define MEN 0x0001 /* Master Mode Enable */ -#define MADD_LEN 0x0002 /* Master Address Length */ -#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ -#define FAST 0x0008 /* Use Fast Mode Timing Specs */ -#define STOP 0x0010 /* Issue Stop Condition */ -#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ -#define DCNT 0x3FC0 /* Data Bytes To Transfer */ -#define SDAOVR 0x4000 /* Serial Data Override */ -#define SCLOVR 0x8000 /* Serial Clock Override */ - -/* TWI_MASTER_STAT Masks */ -#define MPROG 0x0001 /* Master Transfer In Progress */ -#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ -#define ANAK 0x0004 /* Address Not Acknowledged */ -#define DNAK 0x0008 /* Data Not Acknowledged */ -#define BUFRDERR 0x0010 /* Buffer Read Error */ -#define BUFWRERR 0x0020 /* Buffer Write Error */ -#define SDASEN 0x0040 /* Serial Data Sense */ -#define SCLSEN 0x0080 /* Serial Clock Sense */ -#define BUSBUSY 0x0100 /* Bus Busy Indicator */ - -/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ -#define SINIT 0x0001 /* Slave Transfer Initiated */ -#define SCOMP 0x0002 /* Slave Transfer Complete */ -#define SERR 0x0004 /* Slave Transfer Error */ -#define SOVF 0x0008 /* Slave Overflow */ -#define MCOMP 0x0010 /* Master Transfer Complete */ -#define MERR 0x0020 /* Master Transfer Error */ -#define XMTSERV 0x0040 /* Transmit FIFO Service */ -#define RCVSERV 0x0080 /* Receive FIFO Service */ - -/* TWI_FIFO_CTRL Masks */ -#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ -#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ -#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ -#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ - -/* TWI_FIFO_STAT Masks */ -#define XMTSTAT 0x0003 /* Transmit FIFO Status */ -#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ -#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ -#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ - -#define RCVSTAT 0x000C /* Receive FIFO Status */ -#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ -#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ -#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ - -#ifdef _MISRA_RULES -#pragma diag(pop) -#endif /* _MISRA_RULES */ - -#endif /* _DEF_BF59x_H */ |