diff options
Diffstat (limited to 'libgloss/iq2000')
35 files changed, 0 insertions, 2285 deletions
diff --git a/libgloss/iq2000/Makefile.in b/libgloss/iq2000/Makefile.in deleted file mode 100644 index b6aa2c5cf..000000000 --- a/libgloss/iq2000/Makefile.in +++ /dev/null @@ -1,148 +0,0 @@ -# Copyright (c) 2000, Cygnus Solutions, A Red Hat Company -# -# The authors hereby grant permission to use, copy, modify, distribute, -# and license this software and its documentation for any purpose, provided -# that existing copyright notices are retained in all copies and that this -# notice is included verbatim in any distributions. No written agreement, -# license, or royalty fee is required for any of the authorized uses. -# Modifications to this software may be copyrighted by their authors -# and need not follow the licensing terms described here, provided that -# the new terms are clearly indicated on the first page of each file where -# they apply. - -VPATH = @srcdir@ -srcdir = @srcdir@ -objdir = . -srcroot = $(srcdir)/../.. -objroot = $(objdir)/../.. - -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -host_alias = @host_alias@ -target_alias = @target_alias@ -program_transform_name = @program_transform_name@ - -bindir = @bindir@ -libdir = @libdir@ -tooldir = $(exec_prefix)/$(target_alias) - -# Multilib support variables. -# TOP is used instead of MULTI{BUILD,SRC}TOP. -MULTIDIRS = -MULTISUBDIR = -MULTIDO = true -MULTICLEAN = true - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ - -SHELL = /bin/sh - -CC = @CC@ - -#AS = @AS@ -AS = `if [ -f ${objroot}/../gas/as.new ] ; \ - then echo ${objroot}/../gas/as.new ; \ - else echo as ; fi` - -AR = @AR@ - -#LD = @LD@ -LD = `if [ -f ${objroot}/../ld/ld.new ] ; \ - then echo ${objroot}/../ld/ld.new ; \ - else echo ld ; fi` - -RANLIB = @RANLIB@ - -OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \ - then echo ${objroot}/../binutils/objdump ; \ - else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi` -OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \ - then echo ${objroot}/../binutils/objcopy ; \ - else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi` - -CRT0 = crt0.o - -# Generic object files common to all targets. -GENOBJS = _exit.o access.o chmod.o close.o crt1.o \ - fstat.o getpid.o gettime.o isatty.o \ - kill.o lseek.o open.o read.o \ - sbrk.o stat.o time.o trap.o unlink.o utime.o write.o - -# Object files specific to particular targets. -EVALOBJS = ${GENOBJS} - -CFLAGS = -g - -GCC_LDFLAGS = `if [ -d ${objroot}/../gcc ] ; \ - then echo -L${objroot}/../gcc ; fi` - -SCRIPTS = sim -BSP = libeval.a - -# Host specific makefile fragment comes in here. -@host_makefile_frag@ - -# -# build a test program for each target board. Just trying to get -# it to link is a good test, so we ignore all the errors for now. -# - -all: ${CRT0} test.o ${BSP} - -# -# here's where we build the board support packages for each target -# - -libeval.a: $(EVALOBJS) - ${AR} ${ARFLAGS} $@ $(EVALOBJS) - ${RANLIB} $@ - - -# compile a fully linked binary. The -Wl,-T*.ld is for the linker -# script. By using -Wl, the linker script is put on the proper place -# in the comand line for ld, and all the symbols will get fully -# resolved. - -test: $(CRT0) test.o - ${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \ - test.o -o $@ $(NEWLIB_LDFLAGS) - @echo Done... - -doc: - -clean mostlyclean: - rm -f a.out core *.i *~ *.o *-test *.srec *.dis *.map *.x - -distclean maintainer-clean realclean: clean - rm -f Makefile config.status a.out - -.PHONY: install info install-info clean-info -install: - $(INSTALL_PROGRAM) $(CRT0) $(tooldir)/lib${MULTISUBDIR}/$(CRT0) - @for bsp in ${BSP}; do\ - $(INSTALL_PROGRAM) $${bsp} $(tooldir)/lib${MULTISUBDIR}; \ - done - @for script in ${SCRIPTS}; do\ - $(INSTALL_DATA) $(srcdir)/$${script}.ld $(tooldir)/lib${MULTISUBDIR}/$${script}.ld; \ - done - -info: -install-info: -clean-info: - -test.o: ${srcdir}/test.c - -# these are for the BSPs -${CRT0}: ${srcdir}/crt0.S - -# target specific makefile fragment comes in here. -@target_makefile_frag@ - -Makefile: Makefile.in config.status @host_makefile_frag_path@ @target_makefile_frag_path@ - $(SHELL) config.status - -config.status: configure - $(SHELL) config.status --recheck diff --git a/libgloss/iq2000/_exit.c b/libgloss/iq2000/_exit.c deleted file mode 100644 index 318984b8b..000000000 --- a/libgloss/iq2000/_exit.c +++ /dev/null @@ -1,35 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -static void _do_dtors() -{ - /* The loop variable is static so that if a destructor calls exit, - and we return here, we simply continue with the next destructor. */ - typedef void (*pfunc) (); - extern pfunc __dtors[]; - extern pfunc __dtors_end[]; - static pfunc *p = __dtors; - - while (p < __dtors_end) - (*p++) (); -} - - -void _exit (n) -{ - extern unsigned char __eh_frame_begin[]; - extern void __deregister_frame_info (void *); - - /* Destructors should be done earlier because they need to be done before the - files are closed, but here is better than nowhere (and this balances the - constructors done in crt1.c. */ - _do_dtors(); - - /* Deregister any eh frames. */ - __deregister_frame_info (__eh_frame_begin); - - TRAP0 (SYS_exit, n, 0, 0); -} diff --git a/libgloss/iq2000/access.c b/libgloss/iq2000/access.c deleted file mode 100644 index 8e08b3a7f..000000000 --- a/libgloss/iq2000/access.c +++ /dev/null @@ -1,33 +0,0 @@ -/* This is file ACCESS.C */ -/* - * Copyright (C) 1993 DJ Delorie - * All rights reserved. - * - * Redistribution and use in source and binary forms is permitted - * provided that the above copyright notice and following paragraph are - * duplicated in all such forms. - * - * This file is distributed WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - */ - -#include <fcntl.h> -#include <sys/stat.h> -#include <unistd.h> - -int access(const char *fn, int flags) -{ - struct stat s; - if (stat(fn, &s)) - return -1; - if (s.st_mode & S_IFDIR) - return 0; - if (flags & W_OK) - { - if (s.st_mode & S_IWRITE) - return 0; - return -1; - } - return 0; -} - diff --git a/libgloss/iq2000/chmod.c b/libgloss/iq2000/chmod.c deleted file mode 100644 index 8200506fe..000000000 --- a/libgloss/iq2000/chmod.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -chmod (const char *path, mode_t mode) -{ - return TRAP0 (SYS_chmod, path, mode, 0); -} diff --git a/libgloss/iq2000/chown.c b/libgloss/iq2000/chown.c deleted file mode 100644 index 6630d3baa..000000000 --- a/libgloss/iq2000/chown.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - - -int -chown (const char *path, short owner, short group) -{ - return TRAP0 (SYS_chown, path, owner, group); -} diff --git a/libgloss/iq2000/close.c b/libgloss/iq2000/close.c deleted file mode 100644 index 8474b381c..000000000 --- a/libgloss/iq2000/close.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_close (int file) -{ - return TRAP0 (SYS_close, file, 0, 0); -} diff --git a/libgloss/iq2000/configure b/libgloss/iq2000/configure deleted file mode 100755 index b9cfbab40..000000000 --- a/libgloss/iq2000/configure +++ /dev/null @@ -1,1232 +0,0 @@ -#! /bin/sh - -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -sitefile= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --site-file=FILE use FILE as the site file - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -site-file | --site-file | --site-fil | --site-fi | --site-f) - ac_prev=sitefile ;; - -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) - sitefile="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=crt0.S - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$sitefile"; then - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi - fi -else - CONFIG_SITE="$sitefile" -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - - -if test "${enable_shared}" = "yes" ; then - echo "Shared libraries not supported for cross compiling, ignored" -fi - -if test "$srcdir" = "." ; then - if test "${with_target_subdir}" != "." ; then - libgloss_topdir="${srcdir}/${with_multisrctop}../../.." - else - libgloss_topdir="${srcdir}/${with_multisrctop}../.." - fi -else - libgloss_topdir="${srcdir}/../.." -fi -ac_aux_dir= -for ac_dir in $libgloss_topdir $srcdir/$libgloss_topdir; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $libgloss_topdir $srcdir/$libgloss_topdir" 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - - - -# Do some error checking and defaulting for the host and target type. -# The inputs are: -# configure --host=HOST --target=TARGET --build=BUILD NONOPT -# -# The rules are: -# 1. You are not allowed to specify --host, --target, and nonopt at the -# same time. -# 2. Host defaults to nonopt. -# 3. If nonopt is not specified, then host defaults to the current host, -# as determined by config.guess. -# 4. Target and build default to nonopt. -# 5. If nonopt is not specified, then target and build default to host. - -# The aliases save the names the user supplied, while $host etc. -# will get canonicalized. -case $host---$target---$nonopt in -NONE---*---* | *---NONE---* | *---*---NONE) ;; -*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; -esac - - -# Make sure we can run config.sub. -if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi - -echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:598: checking host system type" >&5 - -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac - -host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 - -echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:619: checking target system type" >&5 - -target_alias=$target -case "$target_alias" in -NONE) - case $nonopt in - NONE) target_alias=$host_alias ;; - *) target_alias=$nonopt ;; - esac ;; -esac - -target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$target" 1>&6 - -echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:637: checking build system type" >&5 - -build_alias=$build -case "$build_alias" in -NONE) - case $nonopt in - NONE) build_alias=$host_alias ;; - *) build_alias=$nonopt ;; - esac ;; -esac - -build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$build" 1>&6 - -test "$host_alias" != "$target_alias" && - test "$program_prefix$program_suffix$program_transform_name" = \ - NONENONEs,x,x, && - program_prefix=${target_alias}- - -if test "$program_transform_name" = s,x,x,; then - program_transform_name= -else - # Double any \ or $. echo might interpret backslashes. - cat <<\EOF_SED > conftestsed -s,\\,\\\\,g; s,\$,$$,g -EOF_SED - program_transform_name="`echo $program_transform_name|sed -f conftestsed`" - rm -f conftestsed -fi -test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},; $program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" - -# sed with no file args requires a program. -test "$program_transform_name" = "" && program_transform_name="s,x,x," - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:691: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_IFS" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - -# FIXME: We temporarily define our own version of AC_PROG_CC. This is -# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -# are building a library that must be included in all links, so we -# can't link an executable until this lib is built. -# autoconf should provide a way to do this. - - - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:755: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:785: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:834: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:843: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:858: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi - -AS=${AS-as} - -AR=${AR-ar} - -LD=${LD-ld} - -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:894: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -host_makefile_frag=${srcdir}/../config/default.mh - -if test "${with_multisubdir}" = "m32"; then - LD_TYPE="m32" -else - LD_TYPE="m16" -fi - - -host_makefile_frag_path=$host_makefile_frag - - -target_makefile_frag_path=$target_makefile_frag - - - - -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -cat > conftest.defs <<\EOF -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g -s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g -s%\[%\\&%g -s%\]%\\&%g -s%\$%$$%g -EOF -DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` -rm -f conftest.defs - - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <<EOF -#! /bin/sh -# Generated automatically by configure. -# Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" - -trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS <<EOF - -# Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@host@%$host%g -s%@host_alias@%$host_alias%g -s%@host_cpu@%$host_cpu%g -s%@host_vendor@%$host_vendor%g -s%@host_os@%$host_os%g -s%@target@%$target%g -s%@target_alias@%$target_alias%g -s%@target_cpu@%$target_cpu%g -s%@target_vendor@%$target_vendor%g -s%@target_os@%$target_os%g -s%@build@%$build%g -s%@build_alias@%$build_alias%g -s%@build_cpu@%$build_cpu%g -s%@build_vendor@%$build_vendor%g -s%@build_os@%$build_os%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@CC@%$CC%g -s%@AS@%$AS%g -s%@AR@%$AR%g -s%@LD@%$LD%g -s%@RANLIB@%$RANLIB%g -s%@LD_TYPE@%$LD_TYPE%g -s%@host_makefile_frag_path@%$host_makefile_frag_path%g -/@host_makefile_frag@/r $host_makefile_frag -s%@host_makefile_frag@%%g -s%@target_makefile_frag_path@%$target_makefile_frag_path%g -/@target_makefile_frag@/r $target_makefile_frag -s%@target_makefile_frag@%%g -s%@part_specific_obj@%$part_specific_obj%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <<EOF - -CONFIG_FILES=\${CONFIG_FILES-"Makefile"} -EOF -cat >> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -EOF -cat >> $CONFIG_STATUS <<EOF -srcdir=${srcdir} -target=${target} -ac_configure_args="${ac_configure_args} --enable-multilib" -CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -libgloss_topdir=${libgloss_topdir} - -EOF -cat >> $CONFIG_STATUS <<\EOF -. ${libgloss_topdir}/config-ml.in -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - - - diff --git a/libgloss/iq2000/configure.in b/libgloss/iq2000/configure.in deleted file mode 100644 index 4baabcb97..000000000 --- a/libgloss/iq2000/configure.in +++ /dev/null @@ -1,115 +0,0 @@ -# Copyright (c) 2000, Cygnus Solutions, A Red Hat Company -# -# The authors hereby grant permission to use, copy, modify, distribute, -# and license this software and its documentation for any purpose, provided -# that existing copyright notices are retained in all copies and that this -# notice is included verbatim in any distributions. No written agreement, -# license, or royalty fee is required for any of the authorized uses. -# Modifications to this software may be copyrighted by their authors -# and need not follow the licensing terms described here, provided that -# the new terms are clearly indicated on the first page of each file where -# they apply. -# -# Process this file with autoconf to produce a configure script. -# -AC_PREREQ(2.5)dnl -AC_INIT(crt0.S) - -if test "${enable_shared}" = "yes" ; then - echo "Shared libraries not supported for cross compiling, ignored" -fi - -if test "$srcdir" = "." ; then - if test "${with_target_subdir}" != "." ; then - libgloss_topdir="${srcdir}/${with_multisrctop}../../.." - else - libgloss_topdir="${srcdir}/${with_multisrctop}../.." - fi -else - libgloss_topdir="${srcdir}/../.." -fi -AC_CONFIG_AUX_DIR($libgloss_topdir) - -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM - -AC_PROG_INSTALL - -# FIXME: We temporarily define our own version of AC_PROG_CC. This is -# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -# are building a library that must be included in all links, so we -# can't link an executable until this lib is built. -# autoconf should provide a way to do this. - -AC_DEFUN(LIB_AC_PROG_CC, -[AC_BEFORE([$0], [AC_PROG_CPP])dnl -AC_CHECK_PROG(CC, gcc, gcc) -if test -z "$CC"; then - AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) - test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) -fi - -AC_PROG_CC_GNU - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -dnl Check whether -g works, even if CFLAGS is set, in case the package -dnl plays around with CFLAGS (such as to build both debugging and -dnl normal versions of a library), tasteless as that idea is. - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - AC_PROG_CC_G - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi -]) - -LIB_AC_PROG_CC -AS=${AS-as} -AC_SUBST(AS) -AR=${AR-ar} -AC_SUBST(AR) -LD=${LD-ld} -AC_SUBST(LD) -AC_PROG_RANLIB - -host_makefile_frag=${srcdir}/../config/default.mh - -if test "${with_multisubdir}" = "m32"; then - LD_TYPE="m32" -else - LD_TYPE="m16" -fi -AC_SUBST(LD_TYPE) - -dnl We have to assign the same value to other variables because autoconf -dnl doesn't provide a mechanism to substitute a replacement keyword with -dnl arbitrary data or pathnames. -dnl -host_makefile_frag_path=$host_makefile_frag -AC_SUBST(host_makefile_frag_path) -AC_SUBST_FILE(host_makefile_frag) -target_makefile_frag_path=$target_makefile_frag -AC_SUBST(target_makefile_frag_path) -AC_SUBST_FILE(target_makefile_frag) -AC_SUBST(part_specific_obj) - -AC_OUTPUT(Makefile, -. ${libgloss_topdir}/config-ml.in, -srcdir=${srcdir} -target=${target} -ac_configure_args="${ac_configure_args} --enable-multilib" -CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -libgloss_topdir=${libgloss_topdir} -) - - diff --git a/libgloss/iq2000/creat.c b/libgloss/iq2000/creat.c deleted file mode 100644 index 1003a2a39..000000000 --- a/libgloss/iq2000/creat.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -creat (const char *path, - int mode) -{ - return TRAP0 (SYS_creat, path, mode, 0); -} diff --git a/libgloss/iq2000/crt0.S b/libgloss/iq2000/crt0.S deleted file mode 100644 index 12d2a5b0a..000000000 --- a/libgloss/iq2000/crt0.S +++ /dev/null @@ -1,56 +0,0 @@ -##============================================================================== -## -## crt0.S -## -## IQ2000 startup code -## -##============================================================================== -## -## Copyright (c) 2000, Cygnus Solutions, A Red Hat Company -## -## The authors hereby grant permission to use, copy, modify, distribute, -## and license this software and its documentation for any purpose, provided -## that existing copyright notices are retained in all copies and that this -## notice is included verbatim in any distributions. No written agreement, -## license, or royalty fee is required for any of the authorized uses. -## Modifications to this software may be copyrighted by their authors -## and need not follow the licensing terms described here, provided that -## the new terms are clearly indicated on the first page of each file where -## they apply. -## - -##------------------------------------------------------------------------------ - - .file "crt0.S" - -##------------------------------------------------------------------------------ -## Startup code - .section .text - .global _start -_start: - lui %29,%hi(__stack) - ori %29,%29,%lo(__stack) - - lui %24,%hi(_edata) # get start of bss - ori %24,%24,%lo(_edata) - - lui %25,%hi(_end) # get end of bss - ori %25,%25,%lo(_end) - - beq %24,%25,.L0 # check if end and start are the same - # do nothing if no bss - -.L1: - sb %0,0(%24) # clear a byte and bump pointer - addi %24,%24,1 - bne %24,%25,.L1 - nop - -.L0: - jal _main # call _main to run ctors/dtors - nop - xor %4,%4,%4 - jal main # call main program - xor %5,%5,%5 - jal exit # all done, no need to return or - or %4,%0,%2 # exit with main's return value diff --git a/libgloss/iq2000/crt1.c b/libgloss/iq2000/crt1.c deleted file mode 100644 index fb333a871..000000000 --- a/libgloss/iq2000/crt1.c +++ /dev/null @@ -1,31 +0,0 @@ - - -/* This object reserves enough space for an EH frame initialization -object. */ - -struct object { - void *reserve[7]; -}; - - -void _main () -{ - static int initialized; - static struct object object; - if (! initialized) - { - typedef void (*pfunc) (); - extern pfunc __ctors[]; - extern pfunc __ctors_end[]; - extern unsigned char __eh_frame_begin[]; - extern void __register_frame_info (void *, struct object *); - - pfunc *p; - - initialized = 1; - for (p = __ctors_end; p > __ctors; ) - (*--p) (); - - __register_frame_info (__eh_frame_begin, &object); - } -} diff --git a/libgloss/iq2000/execv.c b/libgloss/iq2000/execv.c deleted file mode 100644 index 16f3ca543..000000000 --- a/libgloss/iq2000/execv.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -execv (const char *path, char *const argv[]) -{ - return TRAP0 (SYS_execv, path, argv, 0); -} diff --git a/libgloss/iq2000/execve.c b/libgloss/iq2000/execve.c deleted file mode 100644 index bd6c7a2a8..000000000 --- a/libgloss/iq2000/execve.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_execve (const char *path, char *const argv[], char *const envp[]) -{ - return TRAP0 (SYS_execve, path, argv, envp); -} diff --git a/libgloss/iq2000/fork.c b/libgloss/iq2000/fork.c deleted file mode 100644 index 53df5a97e..000000000 --- a/libgloss/iq2000/fork.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_fork () -{ - return TRAP0 (SYS_fork, 0, 0, 0); -} diff --git a/libgloss/iq2000/fstat.c b/libgloss/iq2000/fstat.c deleted file mode 100644 index c3b2fa0a6..000000000 --- a/libgloss/iq2000/fstat.c +++ /dev/null @@ -1,14 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_fstat (int file, - struct stat *st) -{ - st->st_mode = S_IFCHR; - st->st_blksize = 4096; - return 0; -} diff --git a/libgloss/iq2000/getpid.c b/libgloss/iq2000/getpid.c deleted file mode 100644 index 20ab1866e..000000000 --- a/libgloss/iq2000/getpid.c +++ /dev/null @@ -1,10 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -_getpid (n) -{ - return 1; -} diff --git a/libgloss/iq2000/gettime.c b/libgloss/iq2000/gettime.c deleted file mode 100644 index 1a0426744..000000000 --- a/libgloss/iq2000/gettime.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" -#include "sys/time.h" - - -int -_gettimeofday (struct timeval *tp, void *tzp) -{ - return TRAP0 (SYS_gettimeofday, tp, tzp, 0); -} diff --git a/libgloss/iq2000/isatty.c b/libgloss/iq2000/isatty.c deleted file mode 100644 index 0930a531e..000000000 --- a/libgloss/iq2000/isatty.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -isatty (fd) - int fd; -{ - return 1; -} diff --git a/libgloss/iq2000/kill.c b/libgloss/iq2000/kill.c deleted file mode 100644 index 40afa6a2c..000000000 --- a/libgloss/iq2000/kill.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -_kill (n, m) -{ - return TRAP0 (SYS_exit, 0xdead, 0, 0); -} - diff --git a/libgloss/iq2000/lseek.c b/libgloss/iq2000/lseek.c deleted file mode 100644 index 339baea29..000000000 --- a/libgloss/iq2000/lseek.c +++ /dev/null @@ -1,14 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/unistd.h> -#include "trap.h" - - -off_t -_lseek (int file, - off_t ptr, - int dir) -{ - return TRAP0 (SYS_lseek, file, ptr, dir); -} diff --git a/libgloss/iq2000/open.c b/libgloss/iq2000/open.c deleted file mode 100644 index 770defef3..000000000 --- a/libgloss/iq2000/open.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_open (const char *path, - int flags) -{ - return TRAP0 (SYS_open, path, flags, 0); -} diff --git a/libgloss/iq2000/pipe.c b/libgloss/iq2000/pipe.c deleted file mode 100644 index dfade5c8c..000000000 --- a/libgloss/iq2000/pipe.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -pipe (int fd) -{ - return TRAP0 (SYS_pipe, fd, 0, 0); -} diff --git a/libgloss/iq2000/read.c b/libgloss/iq2000/read.c deleted file mode 100644 index 31d24cce9..000000000 --- a/libgloss/iq2000/read.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -_read (int file, - char *ptr, - size_t len) -{ - return TRAP0 (SYS_read, file, ptr, len); -} diff --git a/libgloss/iq2000/sbrk.c b/libgloss/iq2000/sbrk.c deleted file mode 100644 index 6dfd93b02..000000000 --- a/libgloss/iq2000/sbrk.c +++ /dev/null @@ -1,30 +0,0 @@ -#include <_ansi.h> -#include <errno.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -caddr_t -_sbrk (size_t incr) -{ - extern char __stack; /* Defined by the linker */ - extern char _end; /* Defined by the linker */ - static char *heap_end; - char *prev_heap_end; - char *sp = (char *)&sp; - - if (heap_end == 0) - { - heap_end = &_end; - } - prev_heap_end = heap_end; - heap_end += incr; - if (heap_end > sp) - { - _write (1, "Heap and stack collision\n", 25); - errno = ENOMEM; - return (caddr_t)-1; - } - return (caddr_t) prev_heap_end; -} diff --git a/libgloss/iq2000/sim.ld b/libgloss/iq2000/sim.ld deleted file mode 100644 index 6530a850a..000000000 --- a/libgloss/iq2000/sim.ld +++ /dev/null @@ -1,278 +0,0 @@ -/* Special linker script for running C executables on simulator */ -OUTPUT_FORMAT("elf32-iq2000", "elf32-iq2000", - "elf32-iq2000") -OUTPUT_ARCH(iq2000) -ENTRY(_start) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - . = 0x80000000; - .interp : { *(.interp) } - .rel.init : { *(.rel.init) } - .rela.init : { *(.rela.init) } - .rel.text : - { - *(.rel.text) - *(.rel.text.*) - *(.rel.gnu.linkonce.t.*) - } - .rela.text : - { - *(.rela.text) - *(.rela.text.*) - *(.rela.gnu.linkonce.t.*) - } - .rel.fini : { *(.rel.fini) } - .rela.fini : { *(.rela.fini) } - .rel.rodata : - { - *(.rel.rodata) - *(.rel.rodata.*) - *(.rel.gnu.linkonce.r.*) - } - .rela.rodata : - { - *(.rela.rodata) - *(.rela.rodata.*) - *(.rela.gnu.linkonce.r.*) - } - .rel.data : - { - *(.rel.data) - *(.rel.data.*) - *(.rel.gnu.linkonce.d.*) - } - .rela.data : - { - *(.rela.data) - *(.rela.data.*) - *(.rela.gnu.linkonce.d.*) - } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.sdata : - { - *(.rel.sdata) - *(.rel.sdata.*) - *(.rel.gnu.linkonce.s.*) - } - .rela.sdata : - { - *(.rela.sdata) - *(.rela.sdata.*) - *(.rela.gnu.linkonce.s.*) - } - .rel.sbss : - { - *(.rel.sbss) - *(.rel.sbss.*) - *(.rel.gnu.linkonce.sb.*) - } - .rela.sbss : - { - *(.rela.sbss) - *(.rela.sbss.*) - *(.rela.gnu.linkonce.sb.*) - } - .rel.sdata2 : - { - *(.rel.sdata2) - *(.rel.sdata2.*) - *(.rel.gnu.linkonce.s2.*) - } - .rela.sdata2 : - { - *(.rela.sdata2) - *(.rela.sdata2.*) - *(.rela.gnu.linkonce.s2.*) - } - .rel.sbss2 : - { - *(.rel.sbss2) - *(.rel.sbss2.*) - *(.rel.gnu.linkonce.sb2.*) - } - .rela.sbss2 : - { - *(.rela.sbss2) - *(.rela.sbss2.*) - *(.rela.gnu.linkonce.sb2.*) - } - .rel.bss : - { - *(.rel.bss) - *(.rel.bss.*) - *(.rel.gnu.linkonce.b.*) - } - .rela.bss : - { - *(.rela.bss) - *(.rela.bss.*) - *(.rela.gnu.linkonce.b.*) - } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : - { - KEEP (*(.init)) - } =0 - .plt : { *(.plt) } - .text : - { - *(.text) - *(.text.*) - *(.stub) - /* .gnu.warning sections are handled specially by elf32.em. */ - *(.gnu.warning) - *(.gnu.linkonce.t.*) - } =0 - .fini : - { - KEEP (*(.fini)) - } =0 - PROVIDE (__etext = .); - PROVIDE (_etext = .); - PROVIDE (etext = .); - /* Adjust the address for the data segment. We want to adjust up to - the same address within the page on the next page up. */ - . = 0x1000; - .data : - { - *(.data) - *(.data.*) - *(.gnu.linkonce.d.*) - SORT(CONSTRUCTORS) - } - .data1 : { *(.data1) } - .eh_frame : - { - PROVIDE (__eh_frame_begin = .); - *(.eh_frame) - LONG (0); - PROVIDE (__eh_frame_end = .); - } - .gcc_except_table : { *(.gcc_except_table) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .gnu.version : { *(.gnu.version) } - .gnu.version_d : { *(.gnu.version_d) } - .gnu.version_r : { *(.gnu.version_r) } - .rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } - .rodata1 : { *(.rodata1) } - .sdata2 : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) } - .sbss2 : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) } - .dynamic : { *(.dynamic) } - .ctors : - { - __ctors = .; - /* gcc uses crtbegin.o to find the start of - the constructors, so we make sure it is - first. Because this is a wildcard, it - doesn't matter if the user does not - actually link against crtbegin.o; the - linker won't look for a file to match a - wildcard. The wildcard also means that it - doesn't matter which directory crtbegin.o - is in. */ - KEEP (*crtbegin.o(.ctors)) - /* We don't want to include the .ctor section from - from the crtend.o file until after the sorted ctors. - The .ctor section from the crtend file contains the - end of ctors marker and it must be last */ - KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - __ctors_end = .; - } - .dtors : - { - __dtors = .; - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - __dtors_end = .; - } - .jcr : { KEEP (*(.jcr)) } - .got : { *(.got.plt) *(.got) } - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata : - { - *(.sdata) - *(.sdata.*) - *(.gnu.linkonce.s.*) - } - _edata = .; - PROVIDE (edata = .); - __bss_start = .; - .sbss : - { - PROVIDE (__sbss_start = .); - PROVIDE (___sbss_start = .); - *(.dynsbss) - *(.sbss) - *(.sbss.*) - *(.gnu.linkonce.sb.*) - *(.scommon) - PROVIDE (__sbss_end = .); - PROVIDE (___sbss_end = .); - } - .bss : - { - *(.dynbss) - *(.bss) - *(.bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - /* Align here to ensure that the .bss section occupies space up to - _end. Align after .bss to ensure correct alignment even if the - .bss section disappears because there are no input sections. */ - . = ALIGN(32 / 8); - } - . = ALIGN(32 / 8); - _end = .; - PROVIDE (end = .); - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - PROVIDE (__stack = 0x80000); - /* These must appear regardless of . */ -} diff --git a/libgloss/iq2000/stat.c b/libgloss/iq2000/stat.c deleted file mode 100644 index 4e1fddf26..000000000 --- a/libgloss/iq2000/stat.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_stat (const char *path, struct stat *st) - -{ - return TRAP0 (SYS_stat, path, st, 0); -} diff --git a/libgloss/iq2000/test.c b/libgloss/iq2000/test.c deleted file mode 100644 index 9ea873adf..000000000 --- a/libgloss/iq2000/test.c +++ /dev/null @@ -1,39 +0,0 @@ -#include <stdio.h> - -static void -send_msg1 (void) -{ - static char msg[] = "Hello World\r\n"; - write(1, msg, strlen (msg)); -} - -static void -send_msg2 (void) -{ - static char msg[] = "Goodnight Irene\r\n"; - write(1, msg, strlen (msg)); -} - -static void -delay (void) -{ - int i; - - for (i = 0; i < 1000000; i++) - ; -} - -int -main(int argc, char *argv[]) -{ - int i, j; - for (i = 0; i < 10; i++) - { - send_msg1 (); - delay (); - send_msg2 (); - } - return 0; -} - - diff --git a/libgloss/iq2000/time.c b/libgloss/iq2000/time.c deleted file mode 100644 index 2df8d48d2..000000000 --- a/libgloss/iq2000/time.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -time_t -time (time_t *tloc) -{ - return TRAP0 (SYS_time, tloc, 0, 0); -} diff --git a/libgloss/iq2000/times.c b/libgloss/iq2000/times.c deleted file mode 100644 index b804be4cd..000000000 --- a/libgloss/iq2000/times.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" -#include "sys/times.h" - - -clock_t -times (struct tms *buffer) -{ - return TRAP0 (SYS_times, buffer, 0, 0); -} diff --git a/libgloss/iq2000/trap.c b/libgloss/iq2000/trap.c deleted file mode 100644 index 217cef233..000000000 --- a/libgloss/iq2000/trap.c +++ /dev/null @@ -1,13 +0,0 @@ -// Perform a system call. -// Unused parameters should be set to 0. -int __trap0(unsigned long func, unsigned long p1, unsigned long p2, unsigned long p3) -{ - int ret = 0; - asm volatile ("nop\n\tor %%4,%%0,%0" : : "r"(func)); - asm volatile ("nop\n\tor %%5,%%0,%0" : : "r"(p1)); - asm volatile ("nop\n\tor %%6,%%0,%0" : : "r"(p2)); - asm volatile ("nop\n\tor %%7,%%0,%0" : : "r"(p3)); - asm volatile ("nop\n\tor %%11,%%0,%0" : : "r"(func)); - asm volatile ("syscall\n\tnop\n\tor %0,%%0,%%2" : "=r"(ret)); - return ret; -} diff --git a/libgloss/iq2000/trap.h b/libgloss/iq2000/trap.h deleted file mode 100644 index 27636c004..000000000 --- a/libgloss/iq2000/trap.h +++ /dev/null @@ -1,5 +0,0 @@ -#include "syscall.h" - -int __trap0 (); - -#define TRAP0(f, p1, p2, p3) __trap0(f, (p1), (p2), (p3)) diff --git a/libgloss/iq2000/unlink.c b/libgloss/iq2000/unlink.c deleted file mode 100644 index 84fb711de..000000000 --- a/libgloss/iq2000/unlink.c +++ /dev/null @@ -1,11 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_unlink () -{ - return -1; -} diff --git a/libgloss/iq2000/utime.c b/libgloss/iq2000/utime.c deleted file mode 100644 index 3fce7e364..000000000 --- a/libgloss/iq2000/utime.c +++ /dev/null @@ -1,13 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -utime (path, times) - const char *path; - char *times; -{ - return TRAP0 (SYS_utime, path, times, 0); -} diff --git a/libgloss/iq2000/wait.c b/libgloss/iq2000/wait.c deleted file mode 100644 index c8d8b4ce0..000000000 --- a/libgloss/iq2000/wait.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_wait (statusp) - int *statusp; -{ - return TRAP0 (SYS_wait, 0, 0, 0); -} diff --git a/libgloss/iq2000/write.c b/libgloss/iq2000/write.c deleted file mode 100644 index 3ecf4a8cf..000000000 --- a/libgloss/iq2000/write.c +++ /dev/null @@ -1,13 +0,0 @@ -#include <_ansi.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "trap.h" - - -int -_write ( int file, - char *ptr, - size_t len) -{ - return TRAP0 (SYS_write, file, ptr, len); -} |